From the Sector

Reset
82 results
PrePro2D "PrePro 2D“ machine system for tape placement of tailored blanks and laminates with in-situ consolidation. (c) Fraunhofer IPT.
PrePro2D
16.02.2018

Commercialization of Fraunhofer´s tape-placement and tape winding systems

The two AZL Partners Conbility GmbH and Fraunhofer IPT, Aachen started their long-term cooperation for the further development and for the commercialization of Fraunhofer´s tape-placement and tape winding systems with in-situ-consolidation by the usage of laser or IR heat sources.

With this cooperation, the company Conbility GmbH makes 25 years of expertise in special machine development of tape placement systems of the Fraunhofer Institute for Production Technology IPT commercially available. Conbility offers two different tape processing systems available in different configurations.

The two AZL Partners Conbility GmbH and Fraunhofer IPT, Aachen started their long-term cooperation for the further development and for the commercialization of Fraunhofer´s tape-placement and tape winding systems with in-situ-consolidation by the usage of laser or IR heat sources.

With this cooperation, the company Conbility GmbH makes 25 years of expertise in special machine development of tape placement systems of the Fraunhofer Institute for Production Technology IPT commercially available. Conbility offers two different tape processing systems available in different configurations.

The “PrePro 2D” machine system allows for the automated tailored tape placement of UD laminates and which can be used for subsequent thermoforming or as stiffening structures in injection molding processes. The machine comprises a rotating and translational table which is moved relatively to the applicator station. The table is scalable according to the requirements of customers. Standard table diameters are 1200 mm or 2000 mm. The applicator station can be equipped with a single or with multiple spool applicators. Because of the large process area, a 9 kW IR heater is used for the in-situ-consolidation process.  
Three in one: Three technologies included in one single modular system
Furthermore, the award-winning “PrePro 3D” tape placement and winding applicator is available as modular product with decentral control system (including closed-loop control of energy input into the processing zone) for the “plug-in” implementation in existing robot systems or machine systems by standard interfaces for the communication with the master control system. Conbility provides the single applicator as well as turn-key ready systems including the robot and handling systems.

Unique selling point of the PrePro 3D system is its multifunctional range of usage: it accomplishes laser-assisted thermoplastic tape placement, IR-assisted thermoset prepreg placement and dry fiber placement: Three technologies included in one single modular system.  

During the JEC World in Paris (March 6th – 8th 2018), Conbility GmbH will present its new “VCSEL Tape Placement and Winding Applicator” (Fig. 3), developed in cooperation with Fraunhofer IPT and Philips Photonics at the AZL Composites in Action area (Hall 5A, C55).

VCSEL Laser Systems as heat source for lower investment and process costs
This applicator uses an integrated VCSEL Laser System as heat source which has been developed by Philips Photonics. This tape placement and winding applicator can also be integrated as modular “plug-in” system into industrial jointed-arm and linear gantry robots in variable manufacturing cells. Using the new VCSEL Laser as heat source (VCSEL: Vertical-Cavity Surface Emitting Laser) leads to significant lower investment and process cost in comparison to other laser systems. Furthermore, the VCSEL laser system can accomplish controllable in-process adjustments of the laser-spot geometry as well as the intensity distribution within the spot size during the process (in-process control of laser-spot geometries and intensities) for the first time. The new system with 2 kW laser power and 10 separate emission zones which can be controlled separately will be shown at JEC World in Paris 2018 as new product of Conbility GmbH.

Dr. Sabine Amberg-Schwab, Fraunhofer ISC (c) Fraunhofer ISC
Dr. Sabine-Amberg-Schwab, Fraunhofer ISC
24.01.2018

New Plastics Economy Prize für bioORMOCER®e in Davos

Mitarbeiterin des Fraunhofer ISC ausgezeichnet

Mitarbeiterin des Fraunhofer ISC ausgezeichnet

Am 23.1.2018 begann in Davos das Weltwirtschaftsforum. Passend dazu präsentiert die 2016 gegründete New Plastics Economy Initiative der Ellen MacArthur Stiftung die Gewinner der »Circular Materials Challenge« als Teil ihres Innovationspreises. Auf der Suche nach neuen Wegen, der rasant steigenden Ansammlung von Plastikmüll im Meer und der Umwelt entgegenzuwirken, werden insgesamt fünf Projekte mit einem Teil des insgesamt mit einer Million Dollar dotierten Preises ausgezeichnet. Mit dabei ist die Entwicklung der bioORMOCER®e von Dr. Sabine Amberg-Schwab vom Fraunhofer-Institut für Silicatforschung ISC. Das Würzburger Forschungsinstitut ist immer wieder ganz vorn dabei, wenn es um die Entwicklung nachhaltiger Materialien, Technologien und Produkte geht, die zur Lösung der großen weltweiten Herausforderungen beitragen können.
 
Im Jahr 2015 erschien im renommierten Wissenschaftsmagazin Science ein viel beachteter Artikel über den Mülleintrag in die Weltmeere. Zwei Jahre später, im November 2017, wies Dame Ellen Mac Arthur, die Gründerin der gleichnamigen Stiftung, in einem Editorial in genau dieser Zeitschrift auf die immer noch ebenso erschreckende Menge von acht Mio Tonnen Plastikmüll hin, die jährlich neu in unsere Ozeane gelangen. Und es ist damit zu rechnen, dass sich die Produktion von Plastik in den nächsten zwanzig Jahren nochmals verdoppelt. Bisher wird nur ein geringer Teil gesammelt und wiederverwendet – ein enormer Verlust an Wertstoffen einerseits und andererseits ein großes Umweltproblem. Eine Lösung könnten neue Verpackungsmaterialien auf der Basis nachwachsender Rohstoffe – sogenannte Biopolymere – sein, die kompostierbar sind. Bisher waren solche Materialien für Lebensmittelverpackungen eher ungeeignet, weil sie durchlässig sind für  Wasserdampf, Sauerstoff, Kohlendioxid und Aromastoffe.
»Das weltweite Problem des Verpackungsmülls hat uns auch hier im Fraunhofer ISC nicht mehr losgelassen und wir haben nach einer Lösung gesucht«, beschreibt Dr. Sabine Amberg-Schwab, Preisträgerin der Circular Materials Challenge 2018, ihre Motivation. Sie und ihr Team haben langjährige Expertise bei der Entwicklung von Barriereschichten auf Verpackungsfolien für Lebensmittel, um Qualität und Haltbarkeit der verpackten Lebensmittel zu verbessern. Diese Beschichtungen auf der Basis spezieller Hybridpolymere, genannt ORMOCER®e, schützen gegen Wasserdampf und Gaszutritt sowie gegen den unerwünschten Übergang von Fremdstoffen auf den Verpackungsinhalt.
 
Seit einigen Jahren arbeiten die Forscher nun an kompostierbaren Barriereschichten, die Biopolymeren zu einem Durchbruch für ihren zukünftigen Einsatz als nachhaltige und umweltschonende Verpackungswerkstoffe einer neuen Generation verhelfen können. »Unsere bioORMOCER®e beseitigen die Schwächen der Biopolymere und machen sie fit für die hohen Anforderungen an zuverlässiges Verpackungsmaterial«, erläutert Amberg-Schwab. Neben der Aufgabe, die verpackten Lebensmittel zu schützen, sorgen die bioORMOCER®e auch dafür, dass die eigentliche Verpackungsfolie aus Biopolymer sich nicht vorzeitig zersetzt.
 
Diese Entwicklung wird nun von der Ellen MacArthur Foundation ausgezeichnet. Prof. Gerhard Sextl, Leiter des Fraunhofer ISC, betont: »Für unsere Forschung ist der nachhaltige Umgang mit Ressourcen oberstes Gebot. Wir sind sehr stolz, dass unser Team mit dem New Plastics Innovation Prize ausgezeichnet wird – und wir sind stolz darauf, mit unseren Arbeiten dazu beitragen zu können, dass sich zukünftig die Umweltbelastung durch den Verpackungsmüll verringert«.
 
Derzeit arbeiten Amberg-Schwab und ihr Team gemeinsam mit der Fraunhofer-Projektgruppe IWKS und weiteren Partnern im Rahmen des von der EU finanzierten Projekts HyperBioCoat an einem Verfahren, um aus pflanzlichen Lebensmittelresten die Ausgangsstoffe für bioORMOCER®e zu gewinnen, sodass keine wertvollen landwirtschaftlichen Erzeugnisse in Konkurrenz zur Lebensmittelherstellung dafür verbraucht werden müssen.
 
Mehr zum EU-Projekt HyperBioCoat unter http://hyperbiocoat.eu/

Source:

Fraunhofer-Institut für Silicatforschung ISC