From the Sector

Reset
37 results
12.04.2023

Comeback of CIOSH trade fair in Shanghai

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

As a trade fair for safety and occupational health in China, the 104th China International Occupational Safety & Health Goods Expo (CIOSH 2023), organized by China Textile Commerce Association (CTCA) and Messe Düsseldorf (Shanghai) Co., Ltd. (MDS), will be grandly held at the Shanghai New International Expo Centre (SNIEC) Hall E1-E7 from 13-15 April 2023. Following three years of epidemic prevention and control measures, the situation has stabilized in China, allowing the labor protection market to enter a phase of rapid recovery and rebound. CIOSH 2023 will attract over 1,500 exhibitors from 14 countries, showcasing their latest protective equipment and technology in an exhibition area exceeding 80,000 square meters.

Integrating Online and Offline Platforms
CIOSH 2023 encompasses four major sectors: Safety at Work, Security at Work, Health at Work, and Emergency Rescue Management. Renowned domestic and international exhibitors, including 3M, Honeywell, Ansell, SATA, JSP, MSA, DELTAPLUS, Lakeland, Cortina, UVEX, CM Chaomei, Xing Yu Gloves, DS, East Asia Glove, Hanvo, SOMO Zhongmai Safety, SAFETY-INXS, and TELPS, will assemble on site. At the same time, CIOSH 2023 has introduced an innovative online platform - CIOSH VIRTUAL. By offering online displays, live streaming, interactive features, and real-time communications, it breaks time and space constraints, facilitating exhibitors and visitors to continue their business exchanges and cooperations beyond the physical exhibition. So far, nearly 1,300 companies have joined the CIOSH VIRTUAL, showcasing more than 3,000 products online and attracting over 70,000 views.

CIOSH Industry Technical Seminar, Sustainable Development Emerges as the Key Focus
The annual Industry Technical Seminar, held concurrently with CIOSH, serves as a platform for professionals to discuss product solutions, share industry insights, and exchange ideas on relevant policies. In 2021, China integrated climate change mitigation measures into its 14th Five-Year Plan, established a 2030 carbon peaking action plan, and proactively pursued the goal of carbon neutrality by 2060. Under the development objectives of "carbon peaking" and "carbon neutrality," the sustainable development of the personal protective equipment (PPE) industry has become the primary theme of this year's seminar. Experts from China Carbon Low-carbon Certification (Jiangsu) Co., Ltd., China Certification Centre, Inc., and SGS-CSTC Standards Technical Services Co., Ltd., will examine related policies, the effects of "carbon neutrality" on the PPE industry chain and the industries using PPE from different angles. They will also explore the future direction of PPE and offer professional guidance for the transformation of relevant enterprises.

Fall Protection Zone
Falls from height are one of the most common accidents that cause serious injury or death to workers. Effective fall protection requires not only protective equipment, but also professional instructions and training. Therefore, CIOSH set up a new Fall Protection Zone in 2021, which received unanimous acclaim. CIOSH 2023 has continued to invite SKYLOTEC, rothoblaas, JECH, Mode and NTR Safety, five companies that specialize in protection at height, to conduct on-site demonstrations on fall testing, fall protection solutions and aerial rescue, and provide visitors with the most professional fall protection guidance and training.

Occupational Health
CIOSH has always implemented the strategy of expanding the business scope in a diversified way, which devotes itself to providing innovative opportunities and new driving forces for the sustainability of the occupational safety and health industry. This year, focusing on the "occupational health" sector, the exhibition will launch an Ergonomics Zone and an Exoskeleton Technology Zone for the first time.

20.01.2023

Autoneum: Revenue growth in 2022

For the first time in two years, global automotive production recorded a significant increase in full-year 2022 with 82.0 million vehicles produced (2021: 77.2 million vehicles) and growth of 6.2%, driven by the regions Asia and North America, but remained below 2019 levels.
Autoneum's revenue in local currencies increased significantly by 8.5%, largely due to inflation-related compensation. In the regions Europe and Asia, Autoneum's production volumes developed below market. Compared to the July 2022 estimate, revenue was around CHF 90 million lower than assumed due to volume factors. The strong fluctuations in production volumes due to vehicle manufacturer supply chain issues continued in 2022 and were exacerbated by the war in Ukraine in Europe and by COVID-related lockdowns in Autoneum's Asian main market China. Consolidated revenue in Swiss francs increased by 6.1% year-on-year to CHF 1 804.5 million (2021: CHF 1 700.4 million) due to the strong Swiss franc.

For the first time in two years, global automotive production recorded a significant increase in full-year 2022 with 82.0 million vehicles produced (2021: 77.2 million vehicles) and growth of 6.2%, driven by the regions Asia and North America, but remained below 2019 levels.
Autoneum's revenue in local currencies increased significantly by 8.5%, largely due to inflation-related compensation. In the regions Europe and Asia, Autoneum's production volumes developed below market. Compared to the July 2022 estimate, revenue was around CHF 90 million lower than assumed due to volume factors. The strong fluctuations in production volumes due to vehicle manufacturer supply chain issues continued in 2022 and were exacerbated by the war in Ukraine in Europe and by COVID-related lockdowns in Autoneum's Asian main market China. Consolidated revenue in Swiss francs increased by 6.1% year-on-year to CHF 1 804.5 million (2021: CHF 1 700.4 million) due to the strong Swiss franc.

Revenue development in the regions
In local currencies, revenue of Business Group Europe increased by 2.7%, while production volumes of vehicle manufacturers decreased by 1.3%. The growth in revenue resulted from inflation compensation, while Autoneum's production volumes were significantly lower compared to the previous year. Business Group North America increased its revenue in local currencies by 11.0%. The number of vehicles produced increased by 9.7% year-on-year. Volume development at Autoneum’s North American plants clearly improved compared with 2021 due to the allocation of semiconductors to the vehicle models supplied by Autoneum. Revenue of Business Group Asia declined by 2.7% in local currencies, and thus was significantly below the market (+7.7%). Autoneum's production facilities in its main market China are located in regions that were hit particularly hard by the COVID-related lockdowns. Growth in China was also driven by Chinese vehicle manufacturers, with whom Autoneum generated only little revenue last year.
Business Group SAMEA (South America, Middle East and Africa) achieved hyperinflation-adjusted revenue growth in local currencies of 65.2% year-on-year. This increase was mainly due to inflation compensation and in terms of volume slightly outperformed the market, which grew by 7.5%.

Due to significantly lower production volumes in Autoneum's regions Europe and Asia of around CHF 90 million compared to the half-year estimate and further increases in energy costs in the second half of the year, Autoneum expects the full-year 2022 result to be at the lower end of the guidance published on June 15, 2022.

The full year-end financial statements and the Annual Report 2022 will be presented at the Media Conference on March 1, 2023.

Source:

Autoneum Management AG

20.10.2022

Akzo Nobel N.V. publishes results for Q3 2022

Highlights Grow & Deliver (compared with Q3 2021)

  • Revenue up 19% and 14% higher in constant currencies1, pricing up 13%
  • ROS2 at 6.4% (2021: 10.0%), resulting from lower volumes and higher raw material and freight costs, as well as inflation on operating expenses
  • Adjusted EBITDA at €283 million (2021: €325 million)
  • Q4 2022 adjusted operating income expected below €150 million

Highlights Q3 2022 (compared with Q3 2021)

Highlights Grow & Deliver (compared with Q3 2021)

  • Revenue up 19% and 14% higher in constant currencies1, pricing up 13%
  • ROS2 at 6.4% (2021: 10.0%), resulting from lower volumes and higher raw material and freight costs, as well as inflation on operating expenses
  • Adjusted EBITDA at €283 million (2021: €325 million)
  • Q4 2022 adjusted operating income expected below €150 million

Highlights Q3 2022 (compared with Q3 2021)

  • Pricing up 13%, offsetting the increase of raw material and other variable costs. Volumes 5% lower, mainly due to destocking in the distribution channels in Decorative Paints in Europe and in Performance Coatings, as well as lower market demand in China
  • Operating income at €168 million (2021: €226 million), includes €16 million negative impact from Identified items (2021: €15 million net negative impact) and €17 million negative from the retrospective hyperinflation impact of the first half-year of 2022. OPI margin 5.9% (2021: 9.4%)
  • Adjusted operating income3 at €184 million (2021: €241 million); excluding the retrospective impact of hyperinflation accounting at €201 million
  • Net cash from operating activities decreased to an inflow of €126 million (2021: inflow of €290 million)
  • Net income attributable to shareholders at €84 million (2021: €164 million)
  • EPS from total operations at €0.48 (2021: €0.89); adjusted EPS from continuing operations at €0.57 (2021: €0.93)
  • Interim dividend of €0.44 per share (2021: €0.44 per share)

AkzoNobel CEO, Thierry Vanlancker, commented: “Our €201 million adjusted operating income excluding the retrospective impact of hyperinflation accounting bring our Q3 results in line with the market update issued at the end of September. Sharply increased macro-economic uncertainties negatively impacted consumer confidence. This resulted in destocking across several distribution channels in decorative paints Europe and performance coatings, while the market in China was impacted by the ongoing zero COVID-19 policy. Thanks to the strong commitment of our teams, we continue to offset the impact of raw material and freight cost inflation with pricing. We’ve now delivered cumulative pricing of 22% over the last two years. The macro-economic turbulence is expected to continue well into next year. We’ve therefore decided to suspend our targets for 2023 and will provide further guidance when announcing our full-year 2022 results. In the meantime, we will continue to focus on our margin management and cost reduction initiatives.”

Source:

AkzoNobel

Photo: ACIMIT
13.07.2022

Italian textile machinery sector returning to pre-Covid levels

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO2 equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO2 emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.

26.05.2022

Rieter anticipates losses in the first half of 2022

  • Exceptionally high order backlog and sustained strong demand
  • Supply chain bottlenecks, COVID lockdown in China and significant cost increases
  • Takeover of winding machine business leads to additional costs
  • Sales and earnings adversely impacted in first half-year
  • Considerably improved market position

Despite an exceptionally high order backlog and sustained strong demand, Rieter’s business situation in the first half of 2022 is characterized by the well-known supply chain bottlenecks, the repercussions of the COVID lockdown in China and the significant increases in material and transportation costs.

Further costs are added in connection with the takeover of the automatic winding business as of April 1, 2022.

These factors are adversely impacting both sales and earnings.

  • Exceptionally high order backlog and sustained strong demand
  • Supply chain bottlenecks, COVID lockdown in China and significant cost increases
  • Takeover of winding machine business leads to additional costs
  • Sales and earnings adversely impacted in first half-year
  • Considerably improved market position

Despite an exceptionally high order backlog and sustained strong demand, Rieter’s business situation in the first half of 2022 is characterized by the well-known supply chain bottlenecks, the repercussions of the COVID lockdown in China and the significant increases in material and transportation costs.

Further costs are added in connection with the takeover of the automatic winding business as of April 1, 2022.

These factors are adversely impacting both sales and earnings.

Rieter expects significantly higher sales in the first half of 2022 compared to the prior-year period (first half of 2021: CHF 400.5 million). Rieter anticipates a loss at the EBIT and net result level in the first half of 2022 (first half of 2021: EBIT CHF 9.0 million, net result: CHF 5.3 million).
The company is working intensively on the implementation of measures to minimize the impact of the supply chain bottlenecks, the COVID lockdown in China and the cost increases. The implemented price increases have a delayed effect, particularly in the machinery business. The integration of the automatic winding business is proceeding according to plan.

As soon as the situation in the sourcing markets has normalized, Rieter expects to benefit from the exceptionally high order backlog and the considerably improved market position as a result of the takeover of the automatic winding business as well as Accotex and Temco.
Rieter will provide a detailed report on the business results of the first half of 2022 in July 2022.

Source:

Rieter Management AG

07.04.2022

Rieter Annual General Meeting 2022

  • All motions approved

The Corona Virus also had an impact on the 131st Annual General Meeting of Rieter Holding Ltd., Winterthur, on Thursday, April 7, 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 7, 2022, the independent proxy represented a total of 1 986 shareholders who hold 64.4% of the share capital.

The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 4.00 per share. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2023.

  • All motions approved

The Corona Virus also had an impact on the 131st Annual General Meeting of Rieter Holding Ltd., Winterthur, on Thursday, April 7, 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 7, 2022, the independent proxy represented a total of 1 986 shareholders who hold 64.4% of the share capital.

The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 4.00 per share. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2023.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors Hans-Peter Schwald, Peter Spuhler, Roger Baillod and Carl Illi were confirmed for an additional one-year term of office. Sarah Kreienbühl and Daniel Grieder were newly elected to the Board of Directors for a one-year term of office.

Furthermore, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office. Sarah Kreienbühl was newly elected to the Remuneration Committee and is taking over the chair.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2021, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

More information:
Rieter general meeting Spinnerei
Source:

Rieter Management AG

Indorama Ventures completes acquisition of Brazil-based Oxiteno, extending growth profile into attractive surfactant markets (c) Indorama Ventures Public Company Limited
(from left) Alastair Port, João Parolin
06.04.2022

Indorama Ventures now in Brasil

  • Indorama Ventures completes acquisition of Brazil-based Oxiteno, extending growth profile into attractive surfactant markets

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, today completed its acquisition of 100% of Brazil-based Oxiteno S.A. Indústria e Comércio, becoming a leading global supplier in high-value surfactant markets.

The acquisition of Oxiteno, formerly a subsidiary of Ultrapar Participações S.A., was announced in August 2021 and is effective from 1 April 2022 after the transaction was approved by Brazil’s Administrative Council for Economic Defense (CADE). Through the acquisition, IVL extends its growth profile into highly attractive markets in Latin America and the U.S., becoming the leading surfactants producer in the Americas, with additional potential to expand in Europe and Asia.

  • Indorama Ventures completes acquisition of Brazil-based Oxiteno, extending growth profile into attractive surfactant markets

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, today completed its acquisition of 100% of Brazil-based Oxiteno S.A. Indústria e Comércio, becoming a leading global supplier in high-value surfactant markets.

The acquisition of Oxiteno, formerly a subsidiary of Ultrapar Participações S.A., was announced in August 2021 and is effective from 1 April 2022 after the transaction was approved by Brazil’s Administrative Council for Economic Defense (CADE). Through the acquisition, IVL extends its growth profile into highly attractive markets in Latin America and the U.S., becoming the leading surfactants producer in the Americas, with additional potential to expand in Europe and Asia.

Oxiteno becomes part of IVL’s Integrated Oxides and Derivatives (IOD) business segment, which IVL formed in 2020 with the purchase of assets from U.S.-based Huntsman (Spindletop transaction). IOD is a high-margin growth driver alongside IVL’s traditional Combined PET (CPET) necessities segment and its Fibers segment. Together, IVL’s three segments create a stronger and more resilient integrated platform along the company’s petrochemicals value chain.

The Oxiteno acquisition includes 11 manufacturing plants in Latin America and the U.S., 5 R&D centers, an experienced management team, a strong environmental governance record, and expertise in green chemistry innovation. Through Oxiteno, IOD assumes a leading position in technologies catering to innovation-led, high-value-add (HVA) surfactant solutions in attractive home & personal care, crop solutions, and coating & resources markets. This diversity increases IOD’s earnings stability and resilience. The surfactants market has seen consistent growth over the last decade, driven by trends in population growth, urbanization and increasing hygiene awareness amid the global pandemic.

29.03.2022

Esprit Announces Annual Results for FY2021

  • Revenue Increases to HK$8,316 Million with Net Profit After Tax Surging Significantly
  • Recording a Turnaround to HK$381 Million
  • Re-Establishes ESPRIT’s Market Leadership

ESPRIT HOLDINGS LIMITED has announced its audited financial annual results for the year ended 31 December 2021, highlighted by a significant increase in both revenue and profit attributable to shareholders of the Company to HK$8,316 million and HK$381 million respectively, in which the profit attributable to shareholders of the Company also recorded a turnaround versus the loss attributable to shareholders of the Company of HK$414 million for the six months ended 31 December 2020. Gross profit margin was 48.6%, 7.0% higher than the Corresponding Period. Please refer to the Company’s results announcement for the Current Year for further details.

  • Revenue Increases to HK$8,316 Million with Net Profit After Tax Surging Significantly
  • Recording a Turnaround to HK$381 Million
  • Re-Establishes ESPRIT’s Market Leadership

ESPRIT HOLDINGS LIMITED has announced its audited financial annual results for the year ended 31 December 2021, highlighted by a significant increase in both revenue and profit attributable to shareholders of the Company to HK$8,316 million and HK$381 million respectively, in which the profit attributable to shareholders of the Company also recorded a turnaround versus the loss attributable to shareholders of the Company of HK$414 million for the six months ended 31 December 2020. Gross profit margin was 48.6%, 7.0% higher than the Corresponding Period. Please refer to the Company’s results announcement for the Current Year for further details.

Such financial improvement was attributable to various reasons, including (i) the new infrastructure and strategies instituted by the current management team; (ii) improvement in sales with higher gross profit margin; (iii) positive results of efficient cost control measures; (iv) improved inventory management; and (v) growth in E-commerce.

Although revenue in the Current Year was affected by lockdowns in the Company’s major European markets during the first quarter of 2021, and due to increased restrictions on entry requirements into stores during the fourth quarter of 2021, the Group generated revenue via three main channels: E-commerce, wholesale, and owned retail stores. As the ESPRIT brand website and third-party E-commerce partners continued to trade during lockdown, a large portion of the Group’s sales were generated online. This business model allowed it to mitigate some of the negative impacts of the Pandemic in the retail segment. Another driver of growth came from selling fewer discounted products from the Company’s retail business compared to 2020.

The Group has not forgotten the ESPRIT mission and long-standing commitment to sustainability. The Company has continued to work tirelessly towards developing cutting-edge materials that set new standards in terms of environmental sustainability. The Company has formulated and further advanced its ESG strategies to establish ESPRIT as an industry pioneer. Such strategies involve the greater use of sustainable fibers, developing new and innovative product options that support a circular economy, and ensuring environmental awareness is a key message that underpins all of the Group’s projects. To achieve these objectives, the Management has identified four key pillars of growth (Sourcing and Procurement; Marketing and Product; IT, Internet, and E-commerce; and The ESPRIT Brand Story) that are paramount in maintaining the loyalty of existing ESPRIT patrons and attracting new customers.

Looking ahead, the global economy is anticipated to be negatively affected by the lingering effects of the coronavirus pandemic and the conflict in Ukraine. The already unstable logistics industry and disrupted supply chain will likely be further impacted, which in turn will result in higher logistic service costs. Despite the unfavorable global economic outlook, the Group believes that under the leadership of its current management and with the support of dedicated staff members, the Company is on track to ongoing profit growth.

Source:

FleishmanHillard

Photo: Ralph Koch for Mayer & Cie.
23.03.2022

Mayer & Cie.: Successful 2021 - Digitisation, Sustainability and Modernisation topics for 2022

Looking back, 2021 was a positive year for the Albstadt-based circular knitting machine and braiding machine manufacturer Mayer & Cie. After two tough years, sales exceeded Euro 100 million again last year, and the outlook for this year is promising, with production working at long-term full capacity in the circular knitting machine sector.

Looking back, 2021 was a positive year for the Albstadt-based circular knitting machine and braiding machine manufacturer Mayer & Cie. After two tough years, sales exceeded Euro 100 million again last year, and the outlook for this year is promising, with production working at long-term full capacity in the circular knitting machine sector.

In order to maintain its market edge Mayer & Cie. continues to rely on digitisation of both its processes and its products. Substantial investment at its headquarters location, especially in machinery, is on the Mayer & Cie. agenda for 2022. In the years ahead a range of production machinery – lathes, gear cutting and grinding machines – is to be replaced at a scheduled cost running into low double-digit millions. Last year saw an investment in a robot-controlled laser hardening system for heat-treating machine components. The company passes an energy upgrade milestone these days with launching its new CHP cogeneration units.  
 
“Compared with 2020, our Group sales were up by about 40 per cent in 2021,” said Mayer & Cie. Managing Director Benjamin Mayer. After two difficult years in 2019 and 2020 the circular knitting machine manufacturer was able last year to restore sales to a stable level of about 103 million Euro. And it could have achieved an even better result. “Supply chain problems hampered production perceptibly,” the company’s managing director said. “In view of the order situation up to five per cent more might have been possible.” The Albstadt textile machinery manufacturer’s order position has stayed at a sound, high level since the fourth quarter of 2020, and orders in hand will already keep the circular knitting machine division busy until the end of the year, with orders coming in from all over the world, but especially, and with no change, from the company’s core markets Turkey, China and India.

The Management views with concern, however, the conflict in the Ukraine, which at first glance may not affect the sales market directly but might lead to general purchasing restraint in the capital goods sector that like the trade war between the United States and China, which began in 2018, would also affect Mayer & Cie. In addition, effects of the conflict such as high energy prices and interruptions in material supplies and logistics pose a genuine challenge in the further course of the year.

In the braiding machine division, the order position recovered in 2021. Sales of new machines and, especially, spare parts exceeded the 2020 figures significantly. Mayer & Cie. has once more won an award for its in-house and external digitisation measures as one of the most innovative German SMEs. The textile machinery manufacturer won a 2022 Top 100 award for its innovative processes in particular.

Source:

Mayer & Cie.

06.01.2022

Messe Frankfurt cancels consumer goods fairs in January and February 2022

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

The four events, consisting of Christmasworld with its focus on seasonal and festive decorations, Paperworld and Creativeworld with their product ranges for paper, office supplies, stationery and hobby, craft and artists' requisites and Ambiente with its cross-sector range of products for the table, kitchen and housewares, furnishing and decorative accessories, home furnishing concepts, gifts and fashion accessories, are the recognised leading trade fairs in their sectors and open the trading year in their respective segments. Even in a reduced numerical form, the four trade fairs would still have been the leading events worldwide for their respective product segments.

However, the exponential increase in the number of infections worldwide in a very short period of time and the accompanying multitude of developments and decisions that are clearly outside the organiser's sphere of influence have led to a significant deterioration in the general conditions and necessary prerequisites for holding the four leading trade fairs as major events of international relevance at the end of January and in mid-February 2022 respectively. These developments include the classification of Germany as a high-risk area and the associated travel warnings and international and intercontinental travel restrictions in countries such as India, Japan and the United States, as well as the corresponding quarantine obligations. Equally important are the steadily rising infection figures and the accompanying urgent appeal, among others by the Robert Koch Institute and the expert council of the German Federal Government, to continue to reduce contacts to a minimum and to cancel all major events. At present, there are even further international fears that the critical infrastructure will not be maintained due to the highly contagious Omicron variant. The majority of exhibiting and visiting companies at Christmasworld, Paperworld, and Creativeworld as well as Ambiente are currently reacting to this overall situation with travel and trade fair attendance bans for reasons of duty of care towards their employees to protect them from health risks. The global willingness to travel is dropping enormously at the moment.

There are no plans to postpone the event. Detlef Braun, Member of the Executive Board of Messe Frankfurt, explains: "Since the trend-oriented order cycles of the international consumer goods industry require an annual event at the beginning of the year, a shift to the second half of the year would not meet the needs of the exhibiting companies and visitors."

Nordstil to be held in Hamburg from 15 to 17 January 2022
In the interests of the sectors involved, the planning and implementation of Nordstil from 15 to 17 January 2022 is not affected. This trade fair will take place in the Free and Hanseatic City of Hamburg at this time due to other general conditions for local implementation. However, the extremely volatile situation is continuously reviewed and assessed in close exchange with the relevant local authorities and industry partners.

Messe Frankfurt's digital platforms for business success
Messe Frankfurt has already been actively helping retailers to help themselves since 2019 with Nextrade, the first order and data management platform for the home and living sector, and Conzoom Solutions, an information platform for the global consumer goods sector. "A second year without appropriate ordering, inspiration and networking formats poses considerable and in some cases existentially threatening challenges for retailers worldwide," Braun explains. "With our digital offers, we are specifically supporting our partners in industry and trade in this volatile situation. In addition, we will continue to put all our energy and optimism into safe and promising trade fairs. Because there is no substitute for meeting in real life."

Information on the planning of the Frankfurt consumer goods fairs for 2023 will be announced at the beginning of February 2022.

Source:

Messe Frankfurt Exhibition GmbH

(c) Freudenberg. From left: Pietro Traini, Civil Engineer, Dr. Bruno Brandozzi, Manager HSE and Compliance, and Dr. Christian Cavaletti, Operations Manager Sant ́Omero site.
13.12.2021

Freudenberg: Construction of the competence center for apparel interlinings started

Freudenberg Performance Materials Apparel Europe started construction work on its competence center for finishing and coating base material for the apparel industry at its site in Sant´Omero (Italy) as scheduled in December. Further processing of base material is to begin in Italy in early 2023. The Weinheim site will then become the competence center for interlining base material.

In January 2021, Freudenberg Performance Materials Apparel Europe (Freudenberg) announced plans to set up two competence centers. In future, the company will concentrate on manufacturing base material for interlinings at the Weinheim location. Base material finishing and coating is to be bundled at Sant´Omero. For this purpose, production plant will be relocated from Weinheim to Sant´Omero and recommissioned in a newly-built production hall.

The traditional groundbreaking ceremony with senior representatives from local authorities and Freudenberg management was cancelled due to the high number of coronavirus cases in the area.

Freudenberg Performance Materials Apparel Europe started construction work on its competence center for finishing and coating base material for the apparel industry at its site in Sant´Omero (Italy) as scheduled in December. Further processing of base material is to begin in Italy in early 2023. The Weinheim site will then become the competence center for interlining base material.

In January 2021, Freudenberg Performance Materials Apparel Europe (Freudenberg) announced plans to set up two competence centers. In future, the company will concentrate on manufacturing base material for interlinings at the Weinheim location. Base material finishing and coating is to be bundled at Sant´Omero. For this purpose, production plant will be relocated from Weinheim to Sant´Omero and recommissioned in a newly-built production hall.

The traditional groundbreaking ceremony with senior representatives from local authorities and Freudenberg management was cancelled due to the high number of coronavirus cases in the area.

Source:

Freudenberg Performance Materials

06.12.2021

Premium Group sets a strong example for the fashion industry

The Premium Group events will take place in Frankfurt am Main in the third week of January 2022, taking into account the 2G+ regulation (all participants have to be vaccinated, recovered and additionally daily tested).
 
On the basis of the current regulations of the federal government and the Hessian state government, which did not announce any further restrictions for vaccinated people last week, the fashion fairs PREMIUM and SEEK, the FASHIONTECH talks and the showcase of the new format THE GROUND will comply with the official health and hygiene regulations from 18th to January 20, 2022 in Frankfurt am Main.
 
This decision is based on the representative feedback from many protagonists of the industry, expert opinions and a close observation of the situation as well as an assessment of all measures that can be taken in Europe to ensure a safe event.

The Premium Group events will take place in Frankfurt am Main in the third week of January 2022, taking into account the 2G+ regulation (all participants have to be vaccinated, recovered and additionally daily tested).
 
On the basis of the current regulations of the federal government and the Hessian state government, which did not announce any further restrictions for vaccinated people last week, the fashion fairs PREMIUM and SEEK, the FASHIONTECH talks and the showcase of the new format THE GROUND will comply with the official health and hygiene regulations from 18th to January 20, 2022 in Frankfurt am Main.
 
This decision is based on the representative feedback from many protagonists of the industry, expert opinions and a close observation of the situation as well as an assessment of all measures that can be taken in Europe to ensure a safe event.

Four formats - one large exhibition hall
The conceptual novelty is that the PREMIUM, SEEK, THE GROUND and FASHIONTECH events will - for the first time and once - take place all together in a spacious hall, which roughly corresponds to the entire area of Station Berlin, on a total area of approx. 20,000 square meters. The resulting simplified admission management serves the safety of everyone. In this way, visitors can quickly and comfortably experience all the inspiration and concentrated brand power at once.

In addition to the security aspect, the merger of the two flagship events PREMIUM and SEEK in one large exhibition hall will bring new features, above all, in terms of content and atmosphere. Apart from an unprecedentedly strong brand portfolio, completely new synergies and energies will arise, which will make the meeting in January a unique momentum in the history of the industry.

Numerous brands have already signed-up and despite some decisions for smaller pop-up presentations, instead of large stands, the willingness to start again together and to want to send positive signals prevails! In addition to established players, many new brands also want to show their collections now.

THE GROUND - new generation, new platform
THE GROUND will give an outlook on what can be expected in summer with an exclusive press and influencer event. The Fashion Festival ‘for a young and purpose driven generation’ is an innovative platform for brands to get in direct contact with Gen Z with interactive installations, campaigns and storytelling.

At the preview event in January, 15 curated brands and key partners will present their value-based projects and products. In keynotes and panel talks, THE GROUND is dedicated to the topics most relevant to GEN Z: diversity, inclusion & sustainability.

FASHIONTECH - innovation, inspiration, content
FASHIONTECH is the content platform for fashion, technology and lifestyle. This is where decision-makers, industry insiders, communication experts and innovative minds meet to exchange experiences, discuss potential and developments, generate new leads and promote exchange between the various industries.

In addition to the core events, the Premium Group will also organize its popular evening events - due to the conditions, of course, to a slightly different extent than usual.

Source:

PREMIUM Exhibitions GmbH

MUNICH FABRIC START AUTUMN.WINTER 22/23 & BLUEZONE Review (c) Munich Fabric Start Exhibitions GmbH
07.09.2021

MUNICH FABRIC START AUTUMN.WINTER 22/23 & BLUEZONE Review

  • Parade Example for physical Trade Shows

A whole year without physical trade fairs, long months without personal exchange: last week the physical International Textile Trade Show MUNICH FABRIC START and the International Denim Trade Show BLUEZONE took place for the textile industry in Munich. The team at Munich Fabric Start Exhibitions GmbH is bringing a bit of normality back to the industry, but also to event management. Thanks to detailed, Covid-19 compliant fair formats, the organisers show that trade fairs are possible and can be successfully implemented with the appropriate measures.

More than 600 international suppliers presented their new collections and developments for Autumn.Winter 22/23 in around 1000 collections in the Fabrics, Additionals, Design Studios, Sourcing, ReSource and Sustainable Innovations areas at MUNICH FABRIC START as well as denim, sportswear and KEYHOUSE at BLUEZONE.

A winning fusion of BLUEZONE & KEYHOUSE well-attended events

  • Parade Example for physical Trade Shows

A whole year without physical trade fairs, long months without personal exchange: last week the physical International Textile Trade Show MUNICH FABRIC START and the International Denim Trade Show BLUEZONE took place for the textile industry in Munich. The team at Munich Fabric Start Exhibitions GmbH is bringing a bit of normality back to the industry, but also to event management. Thanks to detailed, Covid-19 compliant fair formats, the organisers show that trade fairs are possible and can be successfully implemented with the appropriate measures.

More than 600 international suppliers presented their new collections and developments for Autumn.Winter 22/23 in around 1000 collections in the Fabrics, Additionals, Design Studios, Sourcing, ReSource and Sustainable Innovations areas at MUNICH FABRIC START as well as denim, sportswear and KEYHOUSE at BLUEZONE.

A winning fusion of BLUEZONE & KEYHOUSE well-attended events

Under the motto "BACK TO THE FUTURE", BLUEZONE offered a way back to the tactile experience of textiles and the reunion of the denim community. In addition to international denim weavers and manufacturers, visitors to the Zenith Hall also saw a qualitative selection of KEYHOUSE exhibitors who presented their futuristic innovations for the fashion industry.

Positive visitor & exhibitor echo despite Covid-19 measures

In keeping with the season's title "RISE", the visitors were greeted by inspiring, colourful trend forums with unique highlights for Autumn.Winter 22/23 collection development. In the halls, the industry was able to discover a trade show with the well-known and proven pre-pandemic quality with manufacturers and suppliers presenting in all 8 areas. Non-European suppliers were represented by agencies and offered well-attended show in show concepts.

The newly formed ReSOURCE x SUSTAINABLE INNOVATIONS Area also drew in the crowds. In a modern atmosphere, information was shared on sourcing sustainable textiles and additionals as well as innovative concepts. Another highlight was the launch of FABRIC.iD, the innovative process for the complete digitisation of fabrics to greater serve the industry's digital future.

15.07.2021

Rieter: First half of 2021

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

Crisis management in the pandemic year of 2020 was aimed at protecting employees, fulfilling customer commitments, ensuring liquidity, and also strengthening the market position for the time after the pandemic as well as retaining the ability to benefit from the incipient market recovery.

The focus for 2021 remains on the implementation of this strategy. The measures for crisis management relating to the protection of employees and fulfilling customer commitments are still in effect in countries that continue to be affected by the pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

Source:

Rieter

16.06.2021

Closed-loop recycling pilot project for single-use facemasks

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

“Recognizing the challenge, we set out to explore how used facemasks could potentially be returned into the value chain of new facemask production”, says Dr. Peter Dziezok, Director R&D Open Innovation at P&G. “But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT’s expert scientists and SABIC’s Technology & Innovation specialists to investigate potential solutions.”

As part of the pilot, P&G collected used facemasks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently. To help demonstrate a potential step change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

“A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling, would have not done the job”, explains Dr. Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT. “In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the Coronavirus. In this way it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products”, adds Hofmann, who is also Head of Research Department “Advanced Recycling” at Fraunhofer CCPE.

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new PP resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process. Mass balance is considered a crucial bridge between today’s large scale linear economy and the more sustainable circular economy of the future, which today is operated on a smaller scale but is expected to grow quickly.

“The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through active collaboration of players from across the value chain”, emphasizes Mark Vester, Global Circular Economy Leader at SABIC. “The circular material is part of our TRUCIRCLE™ portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources.”

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibers material. “This pilot project has helped us to assess if the close loop approach could work for hygienic and medical grade plastics”, says Hansjörg Reick, P&G Senior Director Open Innovation. “Of course, further work is needed but the results so far have been very encouraging.”

The entire closed loop pilot project from facemask collection to production was developed and implemented within seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

Source:

Fraunhofer

25.03.2021

Autoneum Holding AG Annual General Meeting

  • Waiver of dividend
  • Expansion of Board of Directors

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to forgo dividend payments. Liane Hirner and Oliver Streuli were newly elected to the Board of Directors. Based on Art. 27 of the Covid-19 Ordinance 3, the Board of Directors of Autoneum Holding Ltd decided to hold the 2021 Annual General Meeting without physical attendance by the shareholders. For this reason, the Company had asked them in advance to exercise their rights exclusively via the Independent Proxy. He represented 63.5% of a total of 4 672 363 shares.

  • Waiver of dividend
  • Expansion of Board of Directors

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to forgo dividend payments. Liane Hirner and Oliver Streuli were newly elected to the Board of Directors. Based on Art. 27 of the Covid-19 Ordinance 3, the Board of Directors of Autoneum Holding Ltd decided to hold the 2021 Annual General Meeting without physical attendance by the shareholders. For this reason, the Company had asked them in advance to exercise their rights exclusively via the Independent Proxy. He represented 63.5% of a total of 4 672 363 shares.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements 2020. In view of the net loss in the 2020 financial year, the Board of Directors proposed forgoing dividend payments, which was approved by a large majority of the shareholders. Hans-Peter Schwald, Chairman of the Board of Directors, said: “2020 was extremely challenging for the entire automobile industry and also for Autoneum. The pandemic-related drop in revenue has impacted profitability. Despite the net loss, Autoneum reached important financial improvements in 2020. We expect to return to profitability in 2021 and our aim to distribute at least 30% of the net profit attributable to Autoneum shareholders as dividends remains unchanged. The Board of Directors, the Group Executive Board and the Company as a whole are committed fully to ensuring that Autoneum continues to make significant operational and financial improvements.”

Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider and Ferdinand Stutz were confirmed in office. Newly elected to the Board of Directors were Liane Hirner and Oliver Streuli.

With Liane Hirner and Oliver Streuli and the resignation of Peter Spuhler, who did not stand for reelection in order to be able to focus on managing Stadler Rail, the Board of Directors of Autoneum Holding Ltd has expanded from seven to eight members. Hans-Peter Schwald explained: “The expertise of Liane Hirner and Oliver Streuli in the areas of finance and corporate management is of great value to Autoneum. As the Board of Directors, we look forward to this enhancement to the Board and to working with both of them.”

Peter Spuhler has been an important driving force since the Company became independent, he played a major role in shaping Autoneum thanks to his entrepreneurial expertise and showed great commitment to the Company. The Board of Directors thanks him sincerely and wishes him continued success.

This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were re-elected to the Compensation Committee. Oliver Streuli was elected as a new member of this committee. In addition, the shareholders of Autoneum Holding Ltd granted discharge to all members of the Board of Directors and the Group Executive Board with a large majority.

The consultative vote on the 2020 remuneration report was approved by 83.4%. Due to the severe impact of the coronavirus pandemic on the Group’s business development, the members of the Board of Directors renounced half of their compensation for the 2020 financial year and, in order to  align their remuneration with shareholder interests, decided to receive it entirely in Autoneum shares. In addition, a waiver of salary amounting to 10% of the basic salary for a period of three months was agreed upon with the senior management as part of a reduction of personnel costs.

The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2022 financial year as well as the other proposals were also approved by a large majority.

Source:

Autoneum Management AG

09.03.2021

Rieter Financial Year 2020

Financial Year 2020

As a consequence of the COVID-19 pandemic, Rieter closed the 2020 financial year with sales of CHF 573.0 million, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million). Due to the low sales volume, a loss of CHF 84.4 million was recorded at the EBIT level while at the net profit level the loss was CHF 89.8 million. In view of the loss in the 2020 financial year, the Board of Directors proposes that shareholders waive the payment of a dividend for 2020.

Order intake of CHF 640.2 million in the 2020 financial year was 31% down on the previous year (2019: CHF 926.1 million). Following the significant slump in demand in the second quarter of 2020 (CHF 45.7 million), order intake recovered in the third quarter (CHF 174.4 million) and improved further in the fourth quarter (CHF 215.1 million).

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

Financial Year 2020

As a consequence of the COVID-19 pandemic, Rieter closed the 2020 financial year with sales of CHF 573.0 million, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million). Due to the low sales volume, a loss of CHF 84.4 million was recorded at the EBIT level while at the net profit level the loss was CHF 89.8 million. In view of the loss in the 2020 financial year, the Board of Directors proposes that shareholders waive the payment of a dividend for 2020.

Order intake of CHF 640.2 million in the 2020 financial year was 31% down on the previous year (2019: CHF 926.1 million). Following the significant slump in demand in the second quarter of 2020 (CHF 45.7 million), order intake recovered in the third quarter (CHF 174.4 million) and improved further in the fourth quarter (CHF 215.1 million).

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

Business Groups
Sales of the Business Group Machines & Systems amounted to CHF 295.8 million in 2020, which corresponds to a decrease of 24% compared to the previous year. Due to the low volume and taking into account the expenditure on the ongoing innovation program, the business group recorded a loss of CHF 72.4 million at the EBIT level. Order intake in the reporting year was CHF 363.9 million (-35% compared to the previous year).

The Business Group Components with sales of CHF 174.3 million (-24% compared to the previous year) achieved a profit of CHF 1.4 million at the EBIT level before restructuring charges. EBIT after restructuring charges was CHF -5.5 million. The order intake with CHF 169.1 million (-24% compared to the previous year) was just below sales.

The Business Group After Sales achieved sales of CHF 102.9 million (-27% compared to the previous year) and a positive EBIT of CHF 1.8 million. Order intake was CHF 107.2 million (-24% compared to the previous year). Over 60% of spinning mills were shut down in the second quarter of 2020, with a corresponding impact on the demand for spare parts.

Dividend
Due to the loss of CHF 89.8 million at the net profit level in the 2020 financial year, the Board of Directors proposes that shareholders waive the distribution of a dividend.

Outlook
Rieter expects the market recovery that began in the second half of 2020 to continue in 2021. The company expects an order intake in the first half of 2021 exceeding that of the previous half year (second half of 2020: CHF 389.5 million). Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nonetheless, as already announced, Rieter still anticipates that sales in the first half of 2021 will be below the break-even point. In connection with the high order backlog at the beginning of 2021, Rieter expects an operating profit for the full year 2021.

Source:

Rieter Management AG

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG

Ascend announces alliance with The S Group to commercialize Acteev Protect™ yarns and fabrics (c) Ascend
Acteev Protect™ yarns and fabrics
09.12.2020

Ascend announces alliance with The S Group to commercialize Acteev Protect™ yarns and fabrics

  • Partnership offers customers access to full-scale garment design, manufacturing and packaging

Ascend Performance Materials has announced a commercial agreement with The S Group, a globally recognized provider of apparel design, development and manufacturing. The alliance will focus on commercialization of Acteev Protect™ antimicrobial yarns, fibers and fabrics, offering customers full-scale supply chain service from garment design to delivery.

The agreement pairs Ascend's world-class manufacturing operations with The S Group’s track record of success in the wholesale and direct-to-consumer apparel industry. “Our customers will now benefit from a revolutionary antimicrobial material combined with end-to-end support to guide a product from ideation to actualization,” said Lu Zhang, vice president of Acteev.

  • Partnership offers customers access to full-scale garment design, manufacturing and packaging

Ascend Performance Materials has announced a commercial agreement with The S Group, a globally recognized provider of apparel design, development and manufacturing. The alliance will focus on commercialization of Acteev Protect™ antimicrobial yarns, fibers and fabrics, offering customers full-scale supply chain service from garment design to delivery.

The agreement pairs Ascend's world-class manufacturing operations with The S Group’s track record of success in the wholesale and direct-to-consumer apparel industry. “Our customers will now benefit from a revolutionary antimicrobial material combined with end-to-end support to guide a product from ideation to actualization,” said Lu Zhang, vice president of Acteev.

The S Group offers complete supply chain management for apparel brands, including product development, manufacturing, logistics, quality assurance, packaging and order fulfillment. The company lists some of the world’s most recognized brands among its partners, including Lululemon, New Balance and Mack Weldon. Athleisure, performance, scrubs, and seamless products such as intimates, leggings, active wear, socks and gaiters will be available.

Gary Peck, CEO of The S Group, says his team is excited about the commercial potential of Acteev, especially given the new reality of global health concerns. “Garment design has primarily focused on functionality, sustainability and comfort,” said Peck. “The past year has made us all aware that safety can be a valuable feature of fabrics as well, and Acteev checks all those boxes.”

Acteev is Ascend’s patent-pending technology that embeds zinc ions in a polymer to create fibers with long-lasting antimicrobial properties. The result is a fabric that destroys odor-causing bacteria and fungi. Acteev technology is available in a wide range of textiles featuring the flexibility, softness and durability of nylon 6,6.

Recent testing on knit fabric completed at the University of Cambridge has demonstrated that Acteev technology deactivates the virus that causes COVID-19, SARS-CoV-2, with 99.9% efficacy on contact1. Ascend is working with the U.S. Environmental Protection Agency, the U.S. Food and Drug Administration and other governmental agencies to obtain the appropriate regulatory clearances to make specific claims regarding the technology’s antiviral properties.

26.11.2020

Autoneum: Current assessment of the 2020 financial year

The global automobile production has been recovering faster than expected since summer. If this positive trend continues through the full second half of the year, Group revenue in local currencies in the second semester is likely to be just around –5% below the level of the prior year period. For the full year 2020 it is anticipated that revenue in local currencies will decline by around –20% compared to 2019.

Based on this development of revenue, the extensive cost reduction measures taken in response to the COVID-19 crisis and the on-schedule progress of the turnaround in North America, an EBIT margin of 4-5% is expected for the second half of the year and a slightly positive EBIT margin for 2020 as a whole. Supported by the strict management of working capital and investments, the free cash flow is likely to be in the higher double-digit million range, which should enable a slight reduction in debt.

The outlook for 2021 and especially the first half-year remains uncertain and depends strongly on how the pandemic will develop. According to forecasts, global vehicle production in 2021 will still not reach the level of 2019.

The global automobile production has been recovering faster than expected since summer. If this positive trend continues through the full second half of the year, Group revenue in local currencies in the second semester is likely to be just around –5% below the level of the prior year period. For the full year 2020 it is anticipated that revenue in local currencies will decline by around –20% compared to 2019.

Based on this development of revenue, the extensive cost reduction measures taken in response to the COVID-19 crisis and the on-schedule progress of the turnaround in North America, an EBIT margin of 4-5% is expected for the second half of the year and a slightly positive EBIT margin for 2020 as a whole. Supported by the strict management of working capital and investments, the free cash flow is likely to be in the higher double-digit million range, which should enable a slight reduction in debt.

The outlook for 2021 and especially the first half-year remains uncertain and depends strongly on how the pandemic will develop. According to forecasts, global vehicle production in 2021 will still not reach the level of 2019.

Source:

Autoneum Management AG