From the Sector

Reset
83 results
02.06.2021

Teijin: Tenax™ Carbon Fiber Prepreg Adopted for Next-Generation Aircraft Engine Nacelle

Teijin Limited announced today that its Tenax™ carbon fiber prepreg has been adopted for a part of nacelle, or streamlined housing, for next-generation aircraft engine to be used by Airbus. A prototype of the nacelle part, which Nikkiso Co., Ltd. is developing for Airbus’s Propulsion of Tomorrow project, will be delivered to Airbus by the end of 2021.

The Tenax™ prepreg used for the nacelle part was developed especially for aircraft applications using high-performance and rapid-curing epoxy resin. Notably, the Tenax™ prepreg can be molded at a lower temperature and in a shorter time than conventional prepregs for aircraft applications. In addition to general autoclave molding, the Tenax™ prepreg also is suited to press molding for mass production, achieving excellent quality required for aircraft applications. Furthermore, it is compatible with automated fiber placement (AFP) therefore can be combined with automatic laminating technology and short-time molding to maximize production efficiency. The excellent productivity and cost efficiency of the Tenax™ prepreg were key reasons why it was adopted for Nikkiso’s nacelle.

Teijin Limited announced today that its Tenax™ carbon fiber prepreg has been adopted for a part of nacelle, or streamlined housing, for next-generation aircraft engine to be used by Airbus. A prototype of the nacelle part, which Nikkiso Co., Ltd. is developing for Airbus’s Propulsion of Tomorrow project, will be delivered to Airbus by the end of 2021.

The Tenax™ prepreg used for the nacelle part was developed especially for aircraft applications using high-performance and rapid-curing epoxy resin. Notably, the Tenax™ prepreg can be molded at a lower temperature and in a shorter time than conventional prepregs for aircraft applications. In addition to general autoclave molding, the Tenax™ prepreg also is suited to press molding for mass production, achieving excellent quality required for aircraft applications. Furthermore, it is compatible with automated fiber placement (AFP) therefore can be combined with automatic laminating technology and short-time molding to maximize production efficiency. The excellent productivity and cost efficiency of the Tenax™ prepreg were key reasons why it was adopted for Nikkiso’s nacelle.

Teijin is intensively accelerating its development of mid- to downstream applications for aircraft, one of the strategic focuses of its medium-term management plan for 2020-2022. Going forward, Teijin intends to further strengthen its carbon fiber and intermediate material businesses to contribute to increasing global sustainability, aiming to become a company that supports the society of the future.

Source:

Teijin

EURATEX and IAF conventions take place from 7 to 9 November 2021 (c) EURATEX
31.05.2021

EURATEX and IAF conventions take place from 7 to 9 November 2021

From 7 to 9 November 2021, the world of apparel and textiles will meet in Antwerp, Belgium, for a double convention: the 36th World Fashion Convention on 7-8 November, hosted by IAF, and the 9th European Textiles and Apparel Convention on 8-9 November, hosted by EURATEX.

Delegates can choose to register for the IAF’s 36th World Fashion Convention, for EURATEX’s 9th European Textiles and Apparel Convention or for a combination of both, which the organisers of course recommend. The IAF Convention, carrying the theme ‘Transition of the Global Fashion System’ focusses on global industry developments whereas the EURATEX convention, themed “A new paradigm for the European Textiles and Clothing Industry”, has a strong European focus. Therefore, the two conventions are perfectly complementary.

The Antwerp Convention will be the first ‘live’ meeting for the industry in nearly two years’ time. That’s why the convention will combine knowledge with social events, notably the IAF and EURATEX joint networking dinner on 8 November in the Antwerp Fashion Museum.

From 7 to 9 November 2021, the world of apparel and textiles will meet in Antwerp, Belgium, for a double convention: the 36th World Fashion Convention on 7-8 November, hosted by IAF, and the 9th European Textiles and Apparel Convention on 8-9 November, hosted by EURATEX.

Delegates can choose to register for the IAF’s 36th World Fashion Convention, for EURATEX’s 9th European Textiles and Apparel Convention or for a combination of both, which the organisers of course recommend. The IAF Convention, carrying the theme ‘Transition of the Global Fashion System’ focusses on global industry developments whereas the EURATEX convention, themed “A new paradigm for the European Textiles and Clothing Industry”, has a strong European focus. Therefore, the two conventions are perfectly complementary.

The Antwerp Convention will be the first ‘live’ meeting for the industry in nearly two years’ time. That’s why the convention will combine knowledge with social events, notably the IAF and EURATEX joint networking dinner on 8 November in the Antwerp Fashion Museum.

Previous speakers at the EURATEX and IAF conventions came from PVH, Hugo Boss, Zegna, as well as European Commission, McKinsey, OECD, and London College of Fashion. About 150 delegates at each event, from over 20 countries are expected.

For more information click here.

Source:

EURATEX

12.05.2021

Groz-Beckert in person and virtually at ITMA Asia 2021

The 7th ITMA Asia + CITME takes place from 12–16 June 2021 in Shanghai, China. Groz-Beckert presents the new products from all six product areas:
Knitting, Weaving, Felting, Tufting, Carding und Sewing.

The products are presented both physically as exhibits and in extended form via augmented reality. Groz-Beckert welcomes guests on-site at the National Exhibition and Convention Center in Hall 4, Booth C31. In addition to the face-to-face event, the company is inviting industry visitors to its virtual booth.

 

The 7th ITMA Asia + CITME takes place from 12–16 June 2021 in Shanghai, China. Groz-Beckert presents the new products from all six product areas:
Knitting, Weaving, Felting, Tufting, Carding und Sewing.

The products are presented both physically as exhibits and in extended form via augmented reality. Groz-Beckert welcomes guests on-site at the National Exhibition and Convention Center in Hall 4, Booth C31. In addition to the face-to-face event, the company is inviting industry visitors to its virtual booth.

 

More information:
Groz-Beckert ITMA
Source:

Groz-Beckert KG