From the Sector

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
  They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
• Diresul® blacks & greys, a cosmos of greys and deep black and navies
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma

• Visit Archroma at China Interdye 2018, Booth A100, April 11-13, 2018, at the ShanghaiWorld Expo Exhibition & Convention Center, Shanghai, China

Archroma, a global leader in color and specialty chemicals, will present at China Interdye 2018 its latest technologies, under the motto: “Enhanced solutions for color and performance, it's our nature”.
With a heritage of more than 130 years, Archroma provides solutions that combine performance, safety and low impact on resources. The company can draw on its extensive formulation and technical know-how to offer a constant flow of eco-advanced and innovative new in dyestuff and pigments, as well as process and functional chemicals.
Solution packages for innovation

Visitors at Archroma’s Booth A100. will be able to ‘experience’ Archroma's innovative solutions, in particular:

• EarthColors, traceable from nature to fashion
  The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
  The EarthColors have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.
   
• Color Atlas, a game-changing system for fashion design
  The Color Atlas by Archroma® is a groundbreaking platform specially devised to address the needs of designers, brands, retailers, and manufacturers, enhancing creative possibilities for the industry as well as manageability and time to market through key complementary tools: The six-volume ‘Color Atlas Library’ with 4,320 color swatches and cotton poplin samples, the ‘Color Atlas Compact’ in two volumes for increased portability, and the ‘Color Atlas Online’ allowing to capture an inspiring image using a smartphone and immediately identify the closest Color Atlas shade palette, with the possibility to purchase a color sample instantly.
   
• ‘Zero add-on’ formaldehyde finishing and coloring solutions
  Since January 1, 2016, formaldehyde is classified by ECHA5 as “may cause cancer” (Carc. 1B). Archroma offers a unique proposition combining: Fixapret® Resin WFF, a “zero add-on” formaldehyde anti-wrinkle finishing system and Helizarin® EcoSafe a “zero add-on”4 formaldehyde printing system. With Fixapret® Resin WFF, and Helizarin® EcoSafe, consumers can enjoy end-products that look good, whilst saving on precious resources and being gentler on the skin.
   
• Sanitized® Odoractiv 10, active odor control function for polyester textiles
  Visitors at the booth will be able to experience a new unique dimension of odor control function for functional polyester textiles. The newly developed wash-resistant Sanitized® Odoractiv 10 has a dual-action effect: on the one hand it prevents the bacteria from docking on the textile, and on the other, it adsorbs odors whilst the garment is being worn.

Spotlight on automotive solutions
Having acquired a 75% stake in the M. Dohmen group, a specialist in textile dyes and chemicals for automotive, carpet and apparel, Archroma is now in the position to extend its offer in expert products and services. M. Dohmen will be present at the show at Booth A118.

Solution packages for sustainability
Brand owners and retailers around the world are taking action to evaluate the environmental impact of textile treatment, dyeing and finishing processes in response to consumer concerns.
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.

• JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION
Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

• Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

• Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

• Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

• Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

• Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

• Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

• A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

• A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

• The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

• “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

At this year's Heimtextil, which took place from 9-12 January in Frankfurt, Trevira impressed visitors with a brand new fair concept. The company worked together with sixteen of its biggest customers to create a joint booth covering 1,305 square metres of Hall 4.2, drawing a large crowd.

Head of Marketing, Anke Vollenbröker, explained, "Thanks to our new approach and booth concept, we were able to present our brand Trevira CS in an open and welcoming manner plus highlight the good relationship we have with our customers."

Trevira CEO Klaus Holz added, "We are really pleased with the very positive feedback we have had from all sides in response to our grand Trevira CS joint booth. We would like to thank everyone who has contributed to the booth's success. The extremely positive market reaction has reassured us that this is a concept we can build on in the future."

A Trevira exhibition formed the centrepiece of the joint booth, showcasing the winning fabrics from the 2018 Trevira CS Creativity Competition, which this year featured "Colour" as its major theme. At the heart of the display, visitors could find out more about Trevira with the help of twelve tablets providing information in a variety of formats, including a staff presentation and a flyer about the new Trevira Sinfineco® brand.

Encircling this core and thereby completing the joint booth concept, sixteen major customers grouped their individual stands around this centrepiece to display their own new Trevira CS collections for residential and contract usage. The customers joining Trevira to create the booth were Baumann Dekor Ges.m.b.H., Engelbert E. Stieger AG, FIDIVI Tessitura Vergnano S.p.A., Georg + Otto Friedrich, Jenny Fabrics AG, Johan van den Acker Textielfabriek B.V., Mattes & Ammann GmbH & Co. KG, Pugi R.G. S.R.L., Spandauer Velours GmbH & Co. KG, SR Webatex GmbH / Getzner Textil AG, Swisstulle AG, Tessitura Mario Ghioldi & C. srl, Torcitura Fibre Sintetiche S.p.A., Torcitura Lei Tsu S.r.l. / Ilcat S.p.A., Vlnap a.s. / Wagenfelder Spinning Group and Wintex S.r.l..

Another major section of the Trevira booth was dedicated to the world of acoustics. Increasingly, customers are (re)discovering textiles as a way to significantly improve the quality of room acoustics, and this part of the booth also attracted numerous visitors.

A special highlight at the joint booth were the Trevira CS sports shoes, worn by Trevira staff as a key element of the brand's trade fair outfit. The shoes are an Adidas Originals Special Edition of the iconic Stan Smith Silhouette, which Adidas manufactured in cooperation with Kvadrat.

In keeping with annual tradition, the new Trevira CS Gold and Silver Club members were announced during the Heimtextil fair. The new members were presented with their awards at a formal ceremony on Tuesday evening (9 January).

Paris - On April 12th 2018, top European talents from 120 campuses will compete in the fourth edition of the Morpheus Cup to showcase their skills and highlight their most innovative projects. After Luxembourg in 2017, the event will take place in 2018 at the Palais Brongniart (Stock Exchange) in Paris and will focus on burning topics such as Digital Transformation, Creativity, Deeptech, Circular Economy, Ecommerce and much more.

Since its launch in 2015, the Morpheus Cup has been placed under the high patronage of the European Commission with the support of Commissioners Marianne Thyssen and Carlos Moedas in 2017. "The championship is a great opportunity for young people to showcase their skills and to help to bridge the gap between universities, schools and the European employment market. In the Commission, we believe that the right skills not only improve young people's life chances, but also act as a driver for our future competitiveness and growth" underlines Mrs. Thyssen.

In the last three years, the event already attracted hundreds of campus from more than 20 countries and rewarded many of them including Warshaw School of Economics, Mannheim Business School, HEC Paris, Polytechnique Nantes, universities from Oxford, Berlin, Luxembourg, Athens, and Barcelona.

New challenges for new talents

The next edition will take the competition to another level by featuring tech, business, science, marketing, creative challenges in five different rooms, suggesting meetings with employers, innovative brands and investors through 50 stands and presenting not less than 20 categories for students to submit their projects/startups ideas (Morpheus Prize). Apart from the live experiences and challenges designed by entrepreneurs or partners of the event, almost 500 research projects and startups will be showcased to win awards, the championship and up to €50,000 worth of prizes.

Art, circular economy, human capital, smart cities, mobility, FinTech, design, industry, sport, artificial intelligence, topics, regardless of the students’ profiles and education level, invite them to be creative in many different fields.

Finalists will have to pitch in front of an international jury. Past editions welcomed jury members from Google Lunar XPrize, WarnerBros, Accenture, European Investment Fund, FC Barcelona, ESA, Canal+, Novak Djokovic Foundation etc. Daimler, Forbes, Expon Capital, Davidson, Leroy-Merlin, PwC have already joined the next edition.

Registrations are already open. First partners, jury members and employers will be unveiled before Christmas season.

The Morpheus Cup’s website unveils the main characteristics of the championship and also the past editions prize-winners.

Among the winners, the Gold Winner Award distinguishes further the EarthColors range - out of the 330 entries - as one of the most innovative products of the industry in what is one of the highlights of the OutDoor Show held in Friedrichshafen, Germany, until June 21, 2017.
EarthColors are Archroma's patent-pending new method of creating warm ternary shades from nature. These high performance dyes are synthesized from natural waste products of the agriculture and herbal industries, such as almond shells and rosemary leaves, replacing the oil-based raw materials typically used in dyestuff manufacture. Earthcolors are available in a range of six dyes, covering a palette of natural shades. They are fully traceable from the source to the shop – thanks to NCF chip attached on the clothing hangtag.
Visitors at Archroma's booth (A4-306) will also be able to discover why company’s such as Kathmandu and Flocus who have selected EarthColors. The technology will also be on display in a special exhibition and on the official website of the OutDoor show.
“We are extremely proud to receive one of the most prominent Awards in the outdoor industry”, commented Nuria Estape, Head of Marketing & Promotion for Archroma’s Brand & Performance Textile Specialties business, after the ceremony. “The OutDoor Industry Award will surely help us convince more brands and retailers to explore and adopt more nature-friendly solutions from Archroma.”

 Hall 4.1 Booth F13, 9-12 May, Frankfurt-am-Main, Germany Wielsbeke, Belgium – May 8, 2017 – Beaulieu Fibres International, the leading European polyolefin fibre producer, demonstrates its strengths as a “Technology Innovator” at Techtextil 2017, promising more fibre innovations to address market demand in segments such as automotive, flooring and geotextiles.
Beaulieu Fibres International’s recent Supplier Excellence for Technological Innovation Award from Yanfeng Automotive Interiors, is just one example of its commitment to developing innovative new products in close cooperation with customers to enable them to bring more environmentally-friendly, lighter and better performing products to market.
To support this, Techtextil visitors will hear first-hand of Beaulieu Fibres International’s investment in new fibre technology on an industrial scale in Belgium. The EUR 15 million investment will be commissioned in November 2017. It is part of an ongoing programme to extend fibre production to meet future challenges and customer needs.

At Hall 4.1 Booth F13, Techtextil visitors can get insights on upcoming products and explore Beaulieu Fibres International’s extensive and diversified portfolio of Mono, Round and Trilobal fibres, plus BICO-fibres. Donald De Deygere, Sales and Marketing Manager Fibres Industrial, Beaulieu Fibres International, comments: “Being the European leader for polyolefin staple fibres, it is also our commitment to stay ahead as Technology Innovator. Our innovation strategy is the cornerstone of our activities and various awards have proven this success. We are proud to announce new industrial investments in both Belgium and Italy amounting to more than EUR 80 million over 2016-2018.”