From the Sector

Hypetex®, a leader in colouring carbon fibre materials, is delighted to announce that its Hypetex® Kromaskin™ field hockey stick for adidas has been selected as a finalist for the 2022 JEC Innovation Awards.

Hypetex® was commissioned by adidas to develop a market leading hockey stick differentiated from existing equipment not just by its unique pigmented carbon fibre finish, but also by its game changing hitting power and consistency. The patented range of Kromaskin™ sticks, created with support from project partners Textreme® and Marque Makers, was found to outperform competitors in a benchmark study against eight other premium hockey sticks carried out by Loughborough’s Sports Technology Institute (STI).

Hypetex® lead the design, engineering, materials, and production process development for the adidas field hockey stick project. By incorporating the stick’s finish colour within the outermost carbon fibre layer, the stick mould could be adjusted outwards, placing the highly structural spread tow materials right at the outer extremities of the mould cavity, increasing mechanical performance and maximising the structural benefits of the composite materials used.

Whilst the Kromaskin™ surface provides a stunning depth of colour with minimal finishing required after demoulding, the Hypetex® technology, including an epoxy based expanding microsphere system used in the core, delivers significant performance gains on the hockey pitch. In tests at the STI, adidas Kromaskin™ sticks had up to 16% higher coefficient of restitution (COR), meaning they will return more energy and the ball will travel faster. In addition, through the production led design and materials used, the variation in COR was 70% less than the other sticks on test, a significant reduction in the production inconsistencies common with the manufacturing of performance sporting goods.

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

• Aerospace – Application
• Aerospace – Process
• Automotive & road transportation – surface
• Automotive & road transportation – structural
• Building & Civil Engineering
• Design, Furniture & Home
• Equipment & Machinery
• Maritime Transportation & Shipbuilding
• Sports, Leisure & Recreation
• Renewable Energy

The international jury representing the entire composites value chain includes:

• Michel COGNET, Chairman of the Board, JEC Group
• Christophe BINETRUY, Professor of Mechanical Engineering, EC Nantes
• Kiyoshi UZAWA, Professor/Director, Innovative Composite Center, Kanazawa Institute of Technology
• Jiming Sung HA, Professor, Hanyang University
• Brian KRULL, Global Director of Innovation, Magna Exteriors Inc
• Karl-Heinz FULLER, Manager Future Outside Materials, Mercedes Benz AG
• Deniz KORKMAZ, CTO, Kordsa Teknik Tekstil AS
• Henry SHIN, Head of Center, K-CARBON
• Véronique MICHAUD, Associate Professor/ Director, EPFL – Laboratory for Processing of Advanced Composites
• Alan BANKS, Lightweight Innovations Manager, Ford Motor Company
• Enzo CRESCENTI, Technical Authority and Composite Expert, Airbus

Discover the finalists in each category here.

The current energy crisis is impacting on the competitiveness of the European textile and clothing industry. Because there are limited alternatives to the use of gas in different parts of the production process, production costs increase sharply. EURATEX asks the European Commission and Member States to urgently support the industry to avoid company closures. At the same time, we need a long term vision to move towards climate neutrality, while keeping the T&C industry internationally competitive.

EURATEX presented ten key requirements to Kadri Simson, European Commissioner for Energy, to develop such a vision:

1. The apparel and textile industry needs a safe supply with sufficient green energy (electricity and gas) at internationally competitive prices.
2. The transformation of industry requires access to very significant amounts of renewable energy at competitive costs. Additional investments in infrastructure will also be needed to guarantee access to new renewable energy supplies.
3. Until a global (or at least G 20 level) carbon price or other means for a global level playing field in climate protection are implemented, competitive prices for green energy must be granted at European or national levels (e.g. CCfDs, reduction on levies, targeted subsidies).
4. As the European textile and clothing sector faces global competition mainly form countries/regions with less stringent climate ambitions, it is of utmost importance that the European textile and clothing companies are prevented form direct and indirect carbon leakage.
5. EU-policy should support solutions, e.g. through targeted subsidies (for hydrogen, energy grids, R&D, technology roadmap studies etc.).
6. A dedicated approach for SMEs might be appropriate as SMEs do not have the skills/know-how to further improve their energy efficiency and/or becoming carbon neutral.
7. CAPEX and OPEX support will be necessary for breakthrough technologies, like hydrogen.
8. The Fit-for-55-Package must support the European Textile and Clothing industry in decarbonization and carbon neutrality. The EU must therefore advocate a global level playing field more than before. The primary goal must be to establish an internationally uniform, binding CO2 pricing, preferably in the form of a standard at G-7 / G-20 level.
9. EU-policy must not hinder solutions, e.g. we need reasonable state aid rules (compensating the gap between national energy or climate levies and a globally competitive energy price should not be seen as a subsidy).
10. The European Textile and Clothing industry has made use of economically viable potentials to continuously improve energy efficiency over many years and decades. The obligation to implement further measures must be taken considering investment cycles that are in line with practice. Attention must be paid to the proportionality of costs without weakening the competitive position in the EU internal market or with competitors outside the EU.

Please see the attached position paper for more information.

Jamé’s concept.   
Jamé is inspired by the ancient Pay-Jamé: a piece of clothing that a woman or a man used to wear for fluid wellbeing 24/7 regardless of the activity, or the location, or duration time it is needed for. It’s a comfy refined outfit to make people feel free.

Jamè’s values.
Jamé is designed and made in Italy, digitally printed and created to deliver wellness, style, and 24/7 comfort.  
Jamé’s fabric of choice is Bemberg™, a textile that gives Jamé the highest contemporary qualities: Jamé garments are cool in summer, warm in winter, perfect all year round, fashionable, trendy and versatile. The ideal companion for everyday activities, Jamé is perfect for both indoors and outdoors, the perfect outfit for every occasion, day or night.

Environmental responsibility.
Every Jamé clothing is 100% recyclable and manufactured following a very contemporary and responsible made-to-order business model. The latest and greatest digital print technology assures us to avoid waste and over-production.
This means endless customization possibilities, creating a long lasting, high-quality product.

Styling.
Thanks to the expertise and knowledge of its founders Patrizia Marforio and Niccolò Zucchi Frua, Jamé’s vision is deeply rooted in the Italian design and textile tradition.
Jamé's historic archive - made up of more than 17.000 different textures from the 1920s to present day - seamlessly translating into the widest and deepest pattern choice in this one-of-a-kind collection.

Jamé’s fabric of choice:
Bemberg™ is the name of a technologically advanced fiber produced by Asahi Kasei. Bemberg™ is based on regenerated cellulose fiber made from the smart tech transformation of cotton linters.
As a pre-consumer material obtained from the manufacturing process of cotton seeds oil that is converted into fiber through a traceable and transparent closed loop process, Bemberg™ DNA is deeply based on a circular economy approach.
Bemberg™ is gentle on the skin, with amazing touch and exceptional moisture management properties: it quickly absorbs and releases moisture through very small waterways, keeping the wearer cool, fresh, and comfortable at any time of the year.

Promising conditions in the technical textiles and nonwovens market are expected to provide ample opportunities for suppliers at this year’s Cinte Techtextil China. The fair, which last year saw 366 exhibitors and 14,868 visits, will take place from 6 – 8 September 2022 at the Shanghai New International Expo Centre. Flexible exhibiting options will once again be available for overseas companies.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the positive conditions that exhibitors should expect at the fair thusly: “The pandemic has led to a surge in Chinese exports of both technical textiles and nonwovens, the latter in particular. The country remains the largest supplier of nonwovens, comprising one-third of the global total, yet still requires the advanced offerings of overseas machinery suppliers, as well as supplies of raw materials, to support its export production.”

Ms Wen continued: “Domestically, China is seeing increasing consumption of functional apparel, sportswear and personal protection items. Heightened health and sanitary regulations and new hygiene habits will also continue to drive demand, especially for nonwovens, well into the future. There has also been a post-pandemic boost in demand for filter, greenhouse covering and high-density fabrics amongst others. All of this adds up to a wealth of opportunities for overseas companies to take advantage of, as was experienced in the 2021 edition of the fair.”

Exhibitor and visitor experiences in 2021
“Our organisation promotes US cotton and we hope to use this platform to meet more companies and brands in the nonwovens industry who are interested in US cotton, and to meet up with old friends to discuss the current situation and industry trends. We also found some new potential clients this time.” Mr Eric Ni, Senior Manager, China Supply Chain Marketing, Fabrics, Garments and Nonwovens, Cotton Council International, USA

“Cinte Techtextil China is a professional exhibition that brings together cutting-edge technologies and products, allowing us to quickly learn about innovative technology trends in the industry. I’ve been particularly impressed by the biodegradable products in the Innovation Showcase. In addition, I am sourcing mask-related products and mops, and I have found some companies that I’m interested in.” Ms Claire Zhang, Senior Scientist, Personal Health, Philips Research China, Philips (China) Investment Co Ltd, China

CO₂ as renewable carbon source
Carbon is the main element in numerous materials used in industrial processes and in our daily lives. It is currently mostly provided from fossil sources. But what if carbon could be used directly from CO₂ emissions? Biotechnology shows particularly great potential for the eco-effective conversion of climate-damaging CO₂ emissions into valuable basic chemicals. A consortium of 12 partners investigated this pathway in the EU-funded BioRECO₂VER project, examining the conversion of CO₂ emissions from refineries and the cement industry into the chemical building blocks isobutene (C₄H₈) and lactate (C₂H₆O₃).

Innovative chemo-enzymatic concept for CO₂ Capture
Project partner Luleå University of Technology (LTU) focused on the first process step of capturing and concentrating CO₂ from industrial point sources. Their team developed a hybrid chemo-enzymatic process consisting of a novel solvent blend and an ultrastable carbonic anhydrase (CA) enzyme. The solvent blend included an amino acid ionic liquid and a tertiary amine and displayed a good compromise between enzyme compatibility, absorption rate, capacity and desorption potential. In addition, LTU generated ultrastable enzyme mutants that showed 50% increased resistance to selected flue gas inhibitors compared to the original CA. This 3-component CO₂ capture process was scaled up in a pilot rig, and the set-up further used for real off gas pre-treatment in the project.

Two unique pilots for biotechnological CO₂ Conversion/Utilization
The biotechnological conversion of (captured) CO₂ and the co-substrate hydrogen by microorganisms poses technical and economic challenges because it takes place in the liquid phase and the substrates are gases which are poorly soluble. The BioRECO₂VER project investigated two approaches to address this: fermentation under elevated pressure and bio-electrochemistry with in situ production of hydrogen.

Pressurized fermenter
Project coordinator VITO designed a flexible and multifunctional high-pressure fermenter, customized for research activities with advanced online sensors, monitoring and control, and also including a membrane filtration unit to achieve high concentrations of the microbial biocatalysts. The set-up was broadly tested in the BioRECO₂VER project both with pure CO₂ and CO₂-rich off-gases but can also be used for investigations involving other poorly soluble gases, such as methane, oxygen, or synthesis gas. Pressures up to 10 bar can be applied.

First solely CO₂-based bio-electrochemical platform
University of Girona designed and tested a bio-electrochemical platform. The key differentiators of the pilot plant are:

• Two parallel lines to test engineered strains and bio-electrochemical systems
• Fully automated pilot plant capable to control key operational parameters (pCO₂, pO₂, pH₂, pH, Temperature) to intensify the process performance
• Solid-liquid separation unit (membrane) to recover the planktonic cells and return them into the bio-electrochemical systems.

This unique infrastructure will be used beyond the project to support further research and development activities in the broad area of CO₂ capture and conversion.

Kornit Digital Ltd. announced that Portuguese textile specialist Blur has installed the Kornit Presto S with Softener solution for sustainable, single-step direct-to-fabric production of multiple fabrics in any quantity. The print services provider, which supports the production needs of high fashion brands has previously installed multiple Kornit Atlas and Avalanche systems for industrial-scale digital direct-to-garment (DTG) production on demand.

Using Kornit’s efficient, eco-conscious, proprietary technology and consumables, Blur provides rapid fulfillment of orders ranging from a single piece to mass production, with an average order of about 500 items. Since implementing the Kornit Presto S, the system has been in operation day and night, producing samples during normal business hours and fulfilling diverse incoming orders overnight.

Mariano Dias, CEO at Blur, believes Kornit technology empowers his business to adapt quickly to the constantly evolving needs of his clients, which include both larger established brands seeking large quantities and ambitious designers seeking to build a brand with limited risk or investment. In many cases, they are fulfilling different types of designs for clients serving both Europe and North American markets.
“The quality is just outstanding, and some clients only want to print with Kornit technology”, said Dias. “We are extremely happy with Kornit’s collaboration, and our printers are working perfectly around the clock. Any textile printing company looking to move into fashion and work with famous brands will need both roll-to-roll and DTG capabilities. Our recommendation for success is to buy the Kornit Atlas and Kornit Presto printers.”

He added that Blur’s success with its current Kornit systems, as well as increased demand for sustainably-produced textiles, has the business considering the addition of a second Kornit Presto S to accommodate additional volumes.

“As with many of our customers, Blur was built around more traditional textile operations—in their case embroidery—before discovering the vast potential for growth and versatility offered by quick, efficient, digital production on demand,” said Chris Govier, Kornit Digital Europe, Middle East, and Africa President. “Whether you’re serving an internationally-known fashion house looking for more agile fulfillment and simpler supply chains, or the independent creator hoping to bring unique inspirations to life, Kornit’s product portfolio offers continuous opportunities to answer market needs, create new markets, and scale upwards under any conditions.”

Strict protective measures will make the industry meeting possible at the International Conference on Cellulose Fibres in Cologne on February 2 and 3, 2022. The latest innovations will be shocased: from hygiene and textiles to non-wovens and carbon fibre alternatives to lightweight construction applications. Online participation is also possible.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Live at the conference, host nova-Institute and sponsor GIG Karasek GmbH will grand the “Cellulose Fibre Innovation of the Year” award to one of six highly interesting products, ranging from cellulose made of orange and wood pulp to a novel technology for cellulose fibre production. The presentations, election of the winner by the conference audience and the award ceremony will take place on the first day of the conference.

The conference sessions reflect the current topics of industry and research. “Strategies and Market Trends” provides an overview of the rapid development of cellulose fibres and their technological progress across the fibre market. An analysis of the key cost components of these fibres to benchmark against current cost levels will highlight future opportunities and challenges for novel textile fibres. The session will conclude with an overview of the industry's recent strategies to defossilize the fibre market.

The session “New Opportunities for Cellulose Fibres in Replacing Plastics”, focusses on questions such as: “What impact does the ban on plastics in single-use products have on the industry?” and “What are the latest regulatory issues and policy opportunities for cellulose fibres?”. This part of the conference presents new opportunities for the replacement of fossil-based insulating materials with cellulose-based technologies suitable for use in a variety of applications, from aerospace to mobility and construction.
Institutefor Ecology and Innovation

“Sustainability and Circular Economy” highlights crucial issues with regard to the overall goal of keeping the environmental impact of cellulose fibres low. A core theme of the session is the responsible use of wood and forests. With this objective, the five speakers discuss the importance of circular concepts for cellulose feedstocks. Exciting insights into the important “Hot Button Report” are offered by Canopy. The “Hot Button” report enables the producers of cellulose fibres to better understand the impact their raw materials have on forests and the climate development worldwide.

The full conference programme is available at www.cellulose-fibres.eu/program.

EU-ALLIANCE aims to support SMEs internationalisation in the fields of technical textile, connectivity and advanced materials to address dual use markets in four targeted countries: The United States, Canada, Japan and Indonesia. The EU-ALLIANCE project is funded by the European Union's COSME programme. It brings together 6 key clusters representing nearly 900 companies: Techtera (France); Systematic (France); PO.IN.TEX - Textile innovation cluster (Italy); NTT - Next Technology Tecnotessile (Italy); NIDV - Industries for Defence and Security (Netherlands); SIIT - Intelligent System Integrated Technologies (Italy).

On November 25, the partners hosted a webinar to present the project and the opportunities it will generate. This webinar was also an opportunity to position the participants to benefit from the services generated by the project (market research, commercial missions, B2B meetings, etc.), communicate your needs and thus join the selection of companies that will be able to benefit from European support for these actions. Beyond this internationalisation objective, the project also aims to encourage intra-European collaboration and synergies between the various members of the partner clusters.

Comber machines from Trützschler are already trusted by customers across the textiles industry and around the globe. The TCO 21 is the latest addition to their portfolio and was built to boost productivity,  ensure quality and support increased automation.

High productivity and raw material savings
One of the key benefits of the TCO 21 is its advanced processing speed. This next-generation combing machine is able to produce at a rate of up to 600 nips per minute. the TCO 21 can also be coordinated with Trützschler’s JUMBO CANS (Ø 1.200 mm). They not only reduce yarn defects due to fewer piecings which leads to quality improvements, but also offer a higher efficiency because of their larger dimensions. This, for example, has positive effects on the number of necessary cans and can transports – and results in lower personnel costs.

Excellent yarn quality
The TCO 21 comes with COUNT MONITORING as standard. This feature makes it possible for the machine operator to define limits for count variations via an easy-to-use display. Trützschler’s DISC MONITOR system of sensors measures the count continuously, and the machine alerts the operator and switches off if the limit is exceeded. In addition, the COUNT MONITORING function also includes spectrogram analysis.

Customers can further strengthen their focus on quality by choosing to add the COUNT CONTROL function to the TCO 21. It is managed via the same easy-to-use display, and offers automatic sliver count measurement, as well as spectrogram analysis. It also automatically regulates the main draft during production to balance count variations and ensure the desired sliver count. This feature is particularly attractive for customers who manufacture blends of cotton and synthetic, as it can also be used to avoid variations in the overall yarn composition.

Automatic optimization
The TCO 21 joins the TCO 12 from Trützschler as an combing machine that offers automatic PIECING OPTIMIZER technology, and that finds the right piecing setting without a single laboratory test, because of two functions: First by adjusting the piecing time in the combing cycle (timing function). Whereas the resetting of the detaching point (piecing time) is usually a very time-consuming task, it now takes only a few minutes and is performed automatically at a push on a button. Second the customer is helped to select specific detaching curve types (curve function) for their unique requirements.

Easy operation
The TCO 21 is simple to operate and maintain. The SMART TOUCH display is fast and intuitive, and a Radio-Frequency Identification (RFID) sensor quickly identifies each user and adapts the information on the display to their individual needs. The multi-colored T-LED display provides visual indications of the machine’s status or quality parameters over large distances which enables the operator recognizing them at a glance in the entire spinning mill. The TCO 21 is built with original Trützschler electronics that ensure high performance and durability: Their intelligent cooling system, that has already proven itself in the draw frame TD 10, contributes to a longer service life by reducing the operating temperature of electronic power components. Even if components have to be replaced at some point, the customer can keep their spare parts inventory small, because they can switch also electronics spare parts flexibly between different machine types, e.g. cards and draw frames. The option to add an automatic greasing function completes the easy operation of the TCO 21.