From the Sector

Global Fashion Agenda (GFA) has collaborated with PDS Ventures to launch a new Trailblazer Programme. The new initiative seeks to identify early-stage innovators and support them on their journey to scale.

As part of the Trailblazer Programme, PDS Ventures will award one innovator a significant investment of up to USD 200,000* to accelerate the company’s growth and positive impact in the fashion industry. The winner will also receive commercial and operational support from PDS Group’s Positive Materials - a textile company and strategic research partner supporting the development and acceleration of low impact textile innovation through collaboration between early-stage start-ups, supply chain partners and brands. Further scaling opportunities will be gained through access to PDS Limited’s extensive global supply chain.
 
GFA and PDS Ventures are presenting an open call for solution providers addressing different challenges across the fashion value chain to apply for the programme. Applicants will be reviewed and shortlisted by an esteemed Jury including representatives from GFA, PDS Ventures, Massachusetts Institute of Technology (MIT), Ralph Lauren Corporation, Fashion For Good and H&M Group. Eight shortlisted innovations will be enrolled in a group of Trailblazers, receiving feedback and investment pitch training from industry experts and PDS representatives.     
 
Each shortlisted innovator will then pitch for a potential investment, with the winning Trailblazer being revealed at GFA’s Global Fashion Summit: Copenhagen Edition 2024 - an international forum for sustainability in fashion, on 22-23 May at the Copenhagen Concert Hall. All shortlisted Trailblazers will also have the opportunity to showcase their businesses within an exhibit at the Summit to connect with other key industry stakeholders and potential investors.
 
The Trailblazer Programme corresponds with the theme of the upcoming Global Fashion Summit - ‘Unlocking The Next Level’. Inspired by a significant milestone, 2024 marks 15 years since the inaugural Global Fashion Summit was hosted in 2009. This pivotal anniversary offers a special moment to not only take stock of the evolution of the sector and the progress made so far, but, most importantly, look ahead at what actions must urgently be implemented in the near term, and the gaps that must be filled to accelerate industry transformation.

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Teknik Fuarcılık, which has more than 30 years of experience in exhibition organization and has made the ITM International Textile Machinery Exhibition a world brand, has taken action to make the success achieved by the garment and ready-to-wear sector sustainable. GarmentTech İstanbul Exhibition, which will be organized with the support of the members of the Garment Machinery Advisory Board and in cooperation with the Apparel Automation and Machinery Manufacturers Association (KOMİD), will host professional visitors and global buyers from all over the world.

The press conference of GarmentTech İstanbul Exhibition was attended by members of the Garment Machinery Advisory Board, Vice Chairman of Astaş Holding H. Kaya Aşçı, Astaş Juki Board Member and General Manager Turgay Aşçı, Chairman of the Board of Çatma Makine Yavuz Çatma, Chairman of the Board of Alba Makine Cengiz Albayrak, General Manager of Malkan Makine Alparslan Er, General Manager of Uğur Makine Temel Kamiloğlu, Tetaş Sales and Marketing Assistant General Manager Murat Eren, Malkan Makina Factory Manager Metin Kılıç and KOMID President Haluk Akın, TEMSAD President Adil Nalbant, KOMİD Members Serkon Makina Chairman İzzet Savaş, Robotech General Manager Hüseyin Çetin, Chairman of the Board of NewTech Machinery Nezir Yazıcı, LGM Foreign Trade Specialist Yiğit Sağdık Manav, Avtek Manager Oğuz Avcı and many sector representatives.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

The company is showing its new SWG-XR® WHOLEGARMENT® knitting machine for the first time in Brazil. SWG-XR® features 4 needle beds and SHIMA SEIKI’s original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles, and will be knitting WHOLEGARMENT® sportswear at FIMEC. For conventional shaped knitting, the compact SVR®093 machine with a short knitting width is specially developed for knitting shoe uppers, while the workhorse N.SSR®112 shaping machine features the latest garment knitting technology in an economical yet reliable package.
Both SVR®093 and N.SSR®112 will be knitting shoe uppers at FIMEC while utilizing the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. The classic SFG® seamless glove knitting machine will be knitting safety-oriented work gloves to round out SHIMA SEIKI’s multi-faceted display.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design
and simulation suited to shoe production.

Texhibition Istanbul Fabric and Textile Accessories Fair, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), is ready for its fifth edition. From 6 to 8 March 2024, 558 exhibitors will present themselves to the 30,000 expected visitors from over 100 countries, including the European Union, Great Britain, the USA, North Africa and the Middle East. With this edition, Texhibition has more than doubled the space compared to the last event to 35,000 square metres.

The fifth edition of Texhibition Istanbul offers a comprehensive overview of all product groups in the textile prepress sector: from woven fabrics to knitwear, from denim to artificial leather and textile accessories

Due to popular demand, the fair has been expanded to five halls, including the new Yarn Hall (Hall 8) with exhibitors such as Sasa, Aksa, Karafiber, Kortex, Tepar, Ensar, Kaplanlar and Iskur and the BlueBlack Denim Hall (Hall 7), which showcases the latest denim trends and presents a wide range from blue shades to black denims with exhibitors such as İsko, Çalık Bossa, Kipas and İskur. BlueBlack Denim is designed by the  designer Idil Tarzi in cooperation with the creative directors Gönül Altunisik and Selvi Yigci.

Curated by Idil Tarzi and her creative team, the Texhibition Trend Area in Halls 4 and 5 presents the latest colour trends, materials and accessories.

Under the direction of designers Arzu Kaprol and Filiz Tunca, the Innovation Hub showcases technological innovations that add value to textile production: from fibre to yarn, from fabrics to clothing.

Digital art installations in the entrance area, which run through the entire trade fair, as well as piano performances in the foyer await visitors at the upcoming Texhibition.

Seminars and workshops with industry experts shed light on current topics in the industry, including innovations, production processes and design developments. These opportunities offer participants a platform to exchange knowledge and discuss the latest developments in the textile industry.

The European Chemicals Agency (ECHA), between 2009 and 2023, has performed compliance checks of approximately 15 000 registrations, representing 21 % of full registrations.  The Agency has met its legal target for dossier evaluation, which was increased from 5 % to 20 % in 2019. While, for substances registered at quantities of 100 tonnes or more per year, ECHA has checked compliance for around 30% of them.  

In 2023, the Agency conducted 301 compliance checks, covering more than 1 750 registrations and addressing 274 individual substances. These checks focused on registration dossiers that may have data gaps and aim to enhance the safety data of these substances. As a result, 251 adopted decisions were sent to companies, requesting additional data to clarify long-term effects of chemicals on human health or the environment.

ECHA will now put more focus on following up the requests sent to companies. In the follow-up evaluation process, the Agency assesses the incoming information for compliance. The outcome of the incoming data is shared with the Member States and European Commission to enable prioritisation of substances. ECHA will work closer together with the Member States for enforcement of non-compliant dossiers.  

Compliance of registration dossiers will remain a priority for ECHA for the coming years. This year, the Agency will review the impact of the Joint Evaluation Action Plan, aimed at improving REACH registrations compliance, and, together with stakeholders, develop new priority areas to work on.

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

VliesComp
The aim of the industrial partners Tenowo GmbH (Hof), Siemens AG (Erlangen), Invent GmbH (Braunschweig) and STFI united in the VliesComp project is to bring recycled materials back onto the market in various lightweight construction solutions. The application fields "Innovative e-machine concepts for the energy transition" and "Innovative e-machine concepts for e-mobility" were considered as examples. On display at JEC World in Paris will be a lightweight end shield for electric motors made from hybrid nonwovens - a mixture of thermoplastic fibre components and recycled reinforcing fibres - as well as nonwovens with 100% recycled reinforcing fibres. The end shield was ultimately manufactured with a 100% recycled fibre content. The tests showed that, compared to the variant made from primary carbon fibres using the RTM process, a 14% reduction in CO₂ equivalent is possible with the same performance. The calculation for the use of the prepreg process using a bio-resin system shows a potential for reducing the CO₂ equivalent by almost 70 %.

Bast fibre reinforcement
To increase stability in the plant stem, bast fibres form in the bark area, which support the stem but, in contrast to the rigid wood, are very flexible and allow slender, tall plants to move in the wind without breaking.A new process extracts the bast bark from hemp by peeling.The resulting characteristic values, such as tensile modulus of elasticity, breaking strength and elongation, are very promising in comparison with the continuous rovings made of flax available on the market.The material could be used as reinforcement in lightweight construction.At JEC World, STFI will be exhibiting reinforcing bars that have been processed into a knitted fabric using a pultrusion process based on bio-based reinforcing fibres made from hemp bast for mineral matrices.

Messe Frankfurt will extend its footprint in the Central Asian market by establishing seven brand events in Tashkent, Uzbekistan. The country’s strategic location as a crossroads of Europe and Asia positions it as a promising trade gateway and transportation hub, facilitating the economic development of neighbouring countries and access to the wider region. The company’s stronger presence in the market will promote business opportunities and foster the sustainable development of pillar industries, including cosmetics, textiles and clothing, automotive, logistics and transportation.

Uzbekistan has a promising consumer market with significant potential. It is the largest in Central Asia and is expected to increase due to population growth, rising incomes and the modernisation of economic and industry sectors.
 
The nation has actively sought to diversify its economy in recent years, undertaking reforms for greater entrepreneurial freedom and opening up to more international and regional cooperation. The country already exports precious metals, textiles and agricultural produce. It imports machinery, equipment, means of transportation, and vehicle components from foreign trading partners. Attracting overseas investment is also apparent through incentives such as tax benefits, reduced import duties and simplified procedures for overseas investors.
 
In addition, shifting global supply chains and trading patterns could also drive opportunities in the region. The nation benefits from its geographical location owing to its position between Asia and Europe, to which the Uzbek Government recognises the prospects of investing in infrastructure, such as transportation and logistics, to create an efficient transit hub. Against this backdrop, China acknowledges the importance of developing routes along the Belt and Road while Europe has expressed a readiness to support Uzbekistan’s efforts to diversify transport corridors.

Line-up of shows include:

• Automechanika Tashkent; Futuroad Expo Tashkent; and, Scalex Tashkent: 23 – 25 October 2024
• Heimtextil Uzbekistan; Texworld Tashkent; and, Apparel Sourcing Tashkent: 6 – 8 November 2024
• Beautyworld Central Asia: 21 – 23 November 2024

“From Earth to Earth”: The new plan defines goals and concrete actions in Environmental, Social and Governance (ESG) areas to foster value creation for all stakeholders and put new sustainability regulatory requirements at the centre of attention.

A project, designed to enhance RadiciGroup's transparency and commitment to develop a responsible business along its entire value chain from an economic, social and environmental perspective and focus on the ever more widespread and stringent sustainability regulatory requirements. These are the features and goals of the Sustainability Plan presented by the Group and called "From Earth to Earth", precisely to emphasize the intent to focus on the Earth and future generations.

In the context of a complex and constantly changing scenario, the Group has therefore decided to capitalize on the goals achieved and look beyond them with a plan defining the medium-term targets and the actions to be taken to fulfil them and covering all areas considered to be "material”, i.e., relevant from the point of view of ESG and financial risks, opportunities and impacts. Indeed, the ultimate goal of "From Earth to Earth" is to support business continuity and the growth of the company and all its stakeholders.

The project was the result of a multi-year collaboration with Deloitte, which contributed an external and objective viewpoint on the definition of the material targets and themes. However, it was not an armchair exercise, but the result of an extensive listening process involving internal and external stakeholders, all of whom were sustainability experts who helped define a shortlist of strategic themes for both the Group and its main stakeholders. These issues were then analysed in detail using working tables on the different themes to identify the objectives in Environmental, Social and Governance areas and the related concrete actions needed to achieve them, in line with the European decarbonization and energy transition policies and the
United Nations Sustainable Development Goals, a global blueprint for sustainable growth.

In particular, RadiciGroup’s environmental goals include: a 20% increase and differentiation in renewable source electricity consumption, an 80% reduction in total direct greenhouse gas emissions by 2030 compared to 2011, attention to water consumption to limit the impact on local communities and biodiversity, the extension of Life Cycle Assessment (LCA) methodology to measure the environmental impact of 70% of the products (in terms of weight) manufactured by the entire Group, collaboration among the various actors in the supply chain from an ecodesign perspective and the search for increasingly more sustainable and circular packaging solutions.

The fashion industry, which has strategic importance for the Turkish economy with its value-added production, employment, and exports, came together with representatives of global brands and Laison offices at the 'Green transformation' summit. At the meeting hosted by the Istanbul Apparel Exporters' Association (IHKIB), the studies carried out in the process of adaptation to the Green Deal were put under the spotlight, and the expectations of the Turkish fashion industry from the stakeholders were also expressed.

The opening of the meeting, attended by representatives of relevant ministries and foreign representations, national and international fund providers, as well as brands and buying groups were brought together, was made by Türkiye Exporters Assembly (TIM) and IHKIB President Mustafa Gültepe. In his speech, Gültepe underlined Türkiye's importance in the global apparel industry, by realizing approximately 3.5 percent of world apparel exports. Gültepe continued as follows:

"As IHKIB, we aim to increase our current annual exports, which are around $20 billion, to $40 billion. The road to the goal goes through Europe and America because the European Union is our largest market in apparel. We export 60 percent of our total apparel exports to EU countries. When we add other European countries and the USA, the ratio approaches 75 percent. While working on alternatives for the $40 billion in exports, we need to focus more on the European and U.S. markets because, as the data shows, the path to $40 billion in apparel exports goes through Europe and the U.S. We already have long-standing collaborations with brands centered in Europe and America. With our knowledge, speed, production quality, design power, and geographical proximity to Europe, we distinguish ourselves from competitors. We took a very important step in the transformation process exactly one year ago. We shared our action plan, which is a road map for our fashion industry's compliance with the Green Deal, with the public on January 30, 2023."

After Mustafa Gültepe's opening speech, Euratex Director General Dirk Vantyghem, Deputy Director General of the Ministry of Trade Bahar Güçlü, and Deputy Secretary General of ITKIB Özlem Güneş made presentations regarding the ongoing efforts in the Green Deal process.

Dirk Vantyghem discussed the sustainability strategy of the textile and apparel industry and the expectations from the EU administration, while Bahar Güçlü provided information about the reflections of legal regulations related to the Green Deal on Türkiye.

Deputy Secretary General of ITKIB Özlem Güneş emphasized the significant opportunity that the Green Deal represents for the Turkish apparel industry, providing comprehensive insights into the efforts conducted by IHKIB regarding the Green Deal adaptation process.

Archroma has made its AVITERA® SE technology accessible to more brands and mills with the launch of AVITERA® SE GENERATION NEXT for more cost-effective sustainable dyeing of cellulosic fibers and blends.

With an improved cost-to-performance ratio for new dark and extra-dark shades, the AVITERA® SE GENERATION NEXT range helps mills produce differentiated end articles that comply with the environmental requirements of leading brands and retailers while increasing yield, improving productivity and reducing processing costs.

With high-speed low-temperature wash-off, high process reliability and great reproducibility, AVITERA® SE Generation Next allows mills to achieve water and energy savings of up to 50% and to slash CO₂ emissions and effluent discharge by up to 50% as well. It can also increase mill output by up to 25% or more. The dyes are free from arylamines, including PCA^[1], and offer fastness properties, retaining their colors through repeated home laundering and exposure to light, perspiration and chlorine.

Three new dark colors have been added to the AVITERA® SE range:

• AVITERA® BLACK PEARL SE: A greenish-cast black dye with high color consistency that can be used to correct metamerism.
• AVITERA® BLUE HORIZON SE: A deep blue element with good light fastness in medium to deep shades, as well as high oxidative fastness and high resistance to nitrogen oxides (NOx) in the atmosphere.
• AVITERA® NIGHT STORM SE: A new navy shade with a greenish cast and strong build up. It is recommended for dyeing the deepest navy and combination shades.

^[1] Non-detectable on the garment