From the Sector

• Sateri pledges to Be World’s Leading Net-Positive Fibre Producer

Sateri, one of the world’s largest viscose producer, has launched its sustainability vision for 2030 to guide the company’s strategic growth in the coming decade. The Vision is anchored around four key pillars in response to environmental and social challenges faced by the cellulosic fibre industry: Climate and Ecosystem Protection, Closed Loop Production, Innovation and Circularity, and Inclusive Growth.

The Vision comes with a time-bound roadmap and measurable targets. It encompasses notable targets including net-zero carbon emissions by 2050, achieving 98% Sulphur recovery rate at all its mills by 2025, utilising textile waste and produce viscose products with 50% recycled content by 2025 and 100% by 2030, and supporting more than 300,000 local families and smallholder farmers to develop sustainable livelihoods.

Highlighting the significance of the Vision to the company, Sateri’s President Allen Zhang said, “As a raw material supplier, Sateri will do our part and respond to the urgent need to decouple growth from further resource impact. This is something that will underpin our growth, in addition to QPC (Quality, Productivity, Cost) and continuous improvement which are well-embedded in the company.”*

Sateri’s 2030 Vision was conceived after months of discussions with management members and external stakeholders including customers, brands and NGOs. The process was facilitated by BSR, a sustainability consultancy, led by its Asia Pacific Vice President, Jeremy Prepscius.

“The challenges facing the garment industry require all value chain participants to invest, innovate and integrate sustainability into their business models. This requires leadership and alignment and will need determination to succeed, which is what Sateri is striving to do,” said Prepscius.*

In the coming months, Sateri will form workgroups to develop action plans to deliver on the identified targets. Progress towards realising Sateri 2030 Vision will be reported in the company’s annual sustainability report and online sustainability dashboard.

Read more about Sateri 2030 Vision: www.sateri.com/sustainability/vision2030/

*Please see attached document for more information

The textile industry, one of the major industrial sectors worldwide, is going through a significant revolution, with changes taking place in various sections of textile processing. Biotechnology and biomimicry, for example, are continuously playing an important role in redefining the influence of the textile industry on society, and so is progress made in auxiliary chemistry, with advances investigated and then applied in almost every section of textile processing.  The outcome is amazingly promising.

Modern, real science is inextricably intertwined with environmental consciousness and they are definitely not mutually exclusive.

At RUDOLF GROUP modern, real science means pushing R&D so to constantly explore new technology and innovations that help transform the textile and fashion industries. We work to reduce the overall dependency on traditional and virgin resources.  Getting textile manufacturers as well as brand and retailers on board is key to achieve real change. By 2030 we aim for a significant fraction of our products to be either sourced through paths alternative to the traditional petrochemicals, or by upcycling waste and/or byproducts from other industries.

“This is the kind of genuine, tangible, environmental consciousness that truly defines us and that entails that RUDOLF GROUP has a responsibility for the needs of society as a whole.” Said Alberto De Conti, Head of Rudolf Fashion Division “We have a maniacal attention to the environmental impact of our operations and products. We have truly embedded in ourselves the notion that “sustainability” is a key issue and critical to the long-term survival of our company and of society at large. “

The combination of modern, real science and environmental consciousness leads to what RUDOLF GROUP call aspirational chemistry something unique and something that positions us as shining example and guiding light throughout the industry. That is, in fact, BETTER CHEMISTRY.

Two are the innovations rooted in aspirational chemistry that RUDOLF HUB1922 presents. The first one is our WASHLESS technology and the second one is a brand new launch: LASER SMOOTHER, which supports laser technology and helps creating much better denim looks.

WASHLESS

HUB1922 WASHLESS, which can be applied to both denim and non-denim, is the simultaneous application of
-    proprietary fluorine-free DWR (Durable Water Resistance) based on biomimicry to repel dirt
-    anti-microbial, anti-bacteria and anti-viral, non-migrating chemistry to stop body odour.
The combination of the 2 translates into garments that don’t require to be washed as much.

Life cycle assessment studies on clothes, detergents and washing machines show that home laundering is always the most energy‐demanding period during these products' life cycle, even higher than production or transportation phases.

“WASHLESS aims at changing consumer habits in clothing maintenance to a more environmentally friendly direction and represents a change that is the most feasible and efficient. Making washing machines obsolete is impossible, but even though the technologies in clothes cleaning have improved greatly, the washing frequency has not been reduced. We own more and more clothing and wash it more frequently. This increased amount of washing counteracts the technological improvements in home laundry. “ said De Conti.

It is only by understanding the climate change impact associated with home laundering that product innovations and consumer education can be explored. Studies consistently show that a carbon dioxide reduction of 105 MT and electricity savings of 142 thousand GWh can be obtained by reducing home laundering, on average, by 1/3. This is roughly equivalent to removing 12% of the 140 M passenger cars in the US, or taking 23 coal power plants off the grid. In addition, more than 60% of water consumed while laundering (2,000 billion liters) can be reduced through these strategies.

LASER SMOOTHER

Laser denim is the current dominant technology available to the denim industry to create locally abraded areas, vintage effects, whiskers, patterns, patches, and even intentional holes and tears in a garment. Laser technology uses less water, harmful chemicals (such as potassium permanganate) and energy to create a wide variety of denim looks.

However, laser is not always able to produce the desired look, on the desired fabric, in the desired time. Therefore, chemical companies have been developing laser boosters that can be pre-applied to the garments in order to intensify the effect of the laser to mimic heavier bleaching applications. Unfortunately, laser boosters can create blurred images where the definition is lower and the overall image less natural.

The brand new RUDOLF HUB1922 LASER SMOOTHER is an all-in-one formulation, very easy to pre-apply to garments before laser burning and that return a very natural image which is very similar to the highly desirable hand scraping. Laser smoother can be applied by traditional exhaust or through nebulization and it dries at normal temperature in normal tumble driers.  Advantages of LASER PRIMER are:

•    Remarkable enhancement of the fabric’s characteristics (heightening of material)
•    Overall effect much more natural and similar to manual scraping (craftsmanship dimension)
•    Reduced required laser power to achieve the wanted effect (conspicuous energy saving)
•    A faster laser burning process (significant time saving, depending on the final effect)
•    Any other chemical spray is not required (environmental friendliness)
•    Reduced cost compared to other solution (financial viability)

Wie am 17. August 2020 berichtet, hatte der Aufsichtsrat der SGL Carbon SE Thomas Dippold mit Wirkung zum 1. Dezember 2020 zum CFO und Mitglied des Vorstands der SGL Carbon SE bestellt. Erfreulicherweise kann Herr Dippold kurzfristig sein Amt als Vorstandsmitglied der SGL Carbon SE früher antreten, so dass der Aufsichtsrat der Gesellschaft seine Bestellung nun auf den 15. Oktober 2020 vorgezogen hat, auch um die geplante Übernahme der CFO-Position vorzubereiten.

Herr Dippold tritt wie berichtet zum 1. Dezember 2020 die Nachfolge des langjährigen Finanzvorstands Dr. Michael Majerus an, der zum 30. November 2020 in gutem gegenseitigen Einvernehmen aus seinem Amt ausscheidet.

Dr. Stephan Bühler legt plangemäß sein Amt als Vorstandsmitglied zum 15. Oktober 2020 nieder.

Eleven leading companies from six countries founded the Renewable Carbon Initiative (RCI) in September 2020 under the leadership of nova-Institute (Germany). The aim of the initiative is to support and speed up the transition from fossil carbon to renewable carbon for all organic chemicals and materials.

Besides Lenzing, these ten companies are founding members of the RCI, which also form the Core Advisory Board: Beiersdorf (Germany), Cosun Beet Company (The Netherlands), Covestro (Germany), Henkel (Germany), LanzaTech (USA), NESTE (Finland), SHV Energy (The Netherlands), Stahl (The Netherlands), Unilever (UK) and UPM (Finland).

The Renewable Carbon Initiative (RCI) addresses the core problem of climate change, which is extracting and using additional fossil carbon from the ground. The vision is stated clearly: By 2050, fossil carbon shall be completely substituted by renewable carbon, which is carbon from alternative sources: biomass, direct CO2 utilisation and recycling. The founders are convinced that this is the only way for chemicals, plastics and other organic materials to become sustainable, climate-friendly and part of the circular economy – part of the future.

Robert van de Kerkhof, Chief Commercial Officer of the Lenzing Group: „We at Lenzing believe that we need to create strategic partnerships to implement systemic change. Therefore, we support the Renewable Carbon Initiative. First of all, because it is the right thing to do and, second, it is also fully aligned with our corporate strategy. Therefore, we are part of the RCI from the beginning and its commitment to start acting now.”

Michael Carus, CEO of nova-Institute and head of the Renewable Carbon Initiative: “This is about a fundamental change in the chemical industry. Just as the energy industry is being converted to renewable energies, so renewable carbon will become the new foundation of the future chemical and material industry. The initiative starts today and will be visibly present from now on. We want to accelerate the change.”

The main avenues on which the initiative wants to deliver change are threefold. One, the initiative strives to create cross-industry platforms that will demonstrate feasibility of renewable carbon in tangible activities. Two, one main target will be to advocate for legislation, taxation and regulation changes to give renewable carbon a level commercial playing field to play on. Finally, the third avenue will be to create a wider pull for sustainable options by raising awareness and understanding of renewable carbon level amongst the business community and the wider public.

The Renewable Carbon Initiative has made a powerful start with eleven international member companies and the personal support of more than 100 industry experts. The initiative hopes to gain many additional members and supporters in the upcoming months to keep the strong momentum of the initiative. Working together, RCI will support and accelerate the transition from fossil to renewable carbon for all organic chemicals and materials.

In the end, the aim is as complex as it is simple: renewable energy and renewable carbon for a sustainable future. Within the RCI Lenzing will especially focus on further greening up the textile and nonwoven businesses. Here we will promote this concept and encourage our partners to become a part of this vision.

More information about the Renewable Carbon Initiative can be found on www.renewable-carbon-initiative.com.

• Am 1. September 2020 hat die SGL Carbon 33 neue Auszubildende in Deutschland begrüßt.

An den Standorten Meitingen und Bonn sind die jungen Menschen in unterschiedlichen technischen und kaufmännischen Berufen sowie in dualen Studiengängen in ihr Berufsleben gestartet. Am österreichischen Standort im Innkreis hat bereits Anfang August ein Lehrling die Arbeit aufgenommen.

Die Auszubildenden (in Österreich: Lehrlinge) werden in vielfältigen Fachrichtungen auf ihre spätere Laufbahn als Fachkräfte vorbereitet. Dazu zählen unter anderem die Berufe Industriemechaniker/in, Elektroniker/in für Betriebstechnik, Maschinen- und Anlagenführer/in, Chemielaborant/in, Verfahrensmechaniker/in und Bürokaufmann/-frau. Darüber hinaus bietet die SGL Carbon seit einigen Jahren auch duale Studiengänge mit betriebswirtschaftlichem oder technischem Schwerpunkt an. In diesem Jahr starten hier vier Studenten in den Fachrichtungen chemische Technik, Elektrotechnik, Mechatronik und Umwelttechnik.

Uwe Moderer, Ausbildungsleiter in Meitingen, dem größten Standort der SGL Carbon: „Speziell in diesen besonderen Zeiten ist es wichtig, jungen Menschen eine Perspektive zu geben. Wir freuen uns daher sehr, unsere neuen Auszubildenden willkommen zu heißen.“

Pro Jahr stellt die SGL Carbon im Schnitt etwa 30 neue Auszubildende ein. Bereits jetzt läuft das Bewerbungsverfahren für den Ausbildungsbeginn im September 2021.

Rester Oy, which is developing the plant in Paimio, recycles companies' end-of-life textiles, and Lounais-Suomen Jätehuolto Oy (LSJH), which will hire a production area at the same facility, processes households' end-of-life textiles. The plant will process 12,000 tonnes of end-of-life textiles every year, which represents about 10% of Finland’s textile waste.

The textile industry’s end-of-life textile problem is intolerable. Natural resources are increasingly used to manufacture products, but these materials are lost at the end of their life cycle. About 100 million kilograms of textile waste are generated annually in Finland alone. Reusing this material could reduce the textile industry’s carbon footprint and significantly reduce the use of natural resources.

Rester Oy and LSJH will drive the textile sector towards a circular economy and begin processing textile waste as an industrial raw material. The Nordic countries’ first industrial end-of-textile refinement plant will open in Paimio in 2021. The 3,000-square-metre plant is being developed by Rester Oy, which recycles companies' end-of-life textiles and industrial waste materials. LSJH, which processes households’ end-of-life textiles on its production line, will hire part of the plant.

Outi Luukko, Rester Oy’s board chair, says, “The processing plant will begin a new era of textile circular economy in Finland. As industry pioneers, we are launching a system change in Scandinavia. The transition of the textile industry from a linear model to a circular economy is essential, as virgin materials cannot sustain the current structure of the textile industry. And why should it, when there is so much recyclable material available?”

From the perspective of Rester Oy’s main owner, work clothing supplier Touchpoint, the circular economy plant not only represents resource efficiency, but is also necessary from the perspective of the entire life cycle of a responsible work clothing collection.

Luukko adds, “Finding a local solution to a global problem is a huge leap in the right direction and raises Finland's profile as a pioneer of circular economy."

The future plant will be able to process 12,000 tonnes of end-of-life textiles annually, which represents about 10% of Finland’s textile waste. Both production lines produce recycled fibre, which can be used for various industrial applications, including yarn and fabric, insulating materials for construction and shipping industries, acoustic panels, composites, non-woven and filter materials, and other technical textiles, such as geo-textiles.

LSJH is piloting a full-scale refinement plant

LSJH has launched a pilot production line for processing households' end-of-life textiles. Unfortunately, consumers' end-of-life textiles are heterogeneous, making them a challenging raw material for further processing. Before processing, the textiles are sorted by material into various fibre classes using optical identification technology developed by LSJH and its partners. This ensures the quality of the raw material and the resulting fibre products.

Jukka Heikkilä, managing director for Lounais-Suomen Jätehuolto, explains: “On the basis of the experiences gathered from the pilot project, Lounais-Suomen Jätehuolto is preparing a full-scale refinement plant in the Turku region. As soon as 2023, the plant will process Finnish households' end-of-life textiles. The project involves all waste treatment plants owned by Finnish municipalities.”

Paimio has ambitious goals for circular economy companies

Rester’s initiative aims to create a circular economy cluster in Paimio that combines the processing and reuse of end-of-life textile fibres. Paimion Kehitys Oy, which is owned by the City of Paimio and the local association of enterprises, supports the development of circular economy companies in Paimio.

Mika Ingi, managing director for Paimion Kehitys Oy, says, “We want to step out of our traditional municipal role and create significant added value for everyone taking part. That is why we are involved in the development of a new modern service model based on ecosystem thinking. We are piloting the textile cluster, followed in the coming years by clusters focusing on plastic, construction, and energy. The aim of our service is to support and help develop new profitable business by bringing circular economy companies and their potential customers to innovate together."

The foundation stone of the processing plant was laid today (18 August 2020). The processing plant will begin operations in February 2021.

• Sales and recurring EBIT significantly decreased in first half of 2020

As expected, the second quarter of SGL Carbon was impacted by the Corona pandemic, but not to the extent predicted in May when the quarterly statement for the period ended March 31, 2020 was published. Sales in the three months as per end of June decreased approximately 23 percent year-on-year, whereas Group recurring EBIT was at around 2 million euros and thus higher than anticipated. In total, SGL Carbon reached Group sales of 457 million euros in the first half year. This corresponds to a decrease of around 19 percent year-on-year. The decline is due to a pandemic-related overall weaker business development as well as expected declining developments in the market segments Battery & other Energy (GMS) and Textile Fibers (CFM) due to capacity adjustments. Group recurring EBIT was down approximately 71 percent to 11 million euros.

At a glance*:

• Sales in the second quarter approximately 23 percent below prior-year period; Group recurring EBIT of around 2 million euros was slightly better than anticipated at the presentation of the results of the first quarter 2020
• Group sales in the first half year 2020 at almost 457 million euros and thus around 19 percent below the prior-year period; decrease in sales due to pandemic-related overall weaker business development as well as expected declining developments in the market segments Battery & other Energy (GMS) and Textile Fibers (CFM)
• Group recurring EBIT down approximately 71 percent to 11 million euros
• As a result of measures taken at an early stage and contrary to the normal seasonal trend, cash and cash equivalents at nearly 154 million euros as of June 30, 2020 developed very positively compared to the end of 2019
• According to the full year forecast published on July 28, 2020, SGL Carbon expects Group sales to decline by 15 to 20 percent and a slightly positive operating recurring EBIT
• Dr. Torsten Derr, CEO of SGL Carbon: "My ambition is to achieve lasting success with SGL Carbon. Over the past two months, we have been conducting a comprehensive analysis of our processes, structures and markets. Based on this, we will identify the options that will enable us to sustainably increase our profitability. The Corona pandemic is forcing us to act even faster."

*Please read the attached document for more information

Starting midth of July, brands and retailers can join the U.S. Cotton Trust Protocol, a new system for responsibly grown cotton that will provide annual data for six areas of sustainability in line with the UN Sustainability Goals. This year-on-year data available for the first time will allow brands and retailers to better measure progress towards meeting sustainability commitments.

The Trust Protocol underpins and verifies sustainability progress through sophisticated data collection and independent third-party verification. By working with Field to Market: The Alliance for Sustainable Agriculture and Control Union Certifications North America, the Trust Protocol enables brands and retailers to better track the cotton entering their supply chain. Brands who become members of the Trust Protocol will have access to aggregate year-over-year data on water use, greenhouse gas emissions, energy use, soil carbon and land use efficiency.

The Trust Protocol is a complement to existing sustainability programs and is designed from the ground up to fit the unique cotton mass-growing environment of the United States.

Last month the Trust Protocol was added to Textile Exchange’s list of 36 preferred fibres and materials that more than 170 participating brands and retailers can select from as part of Textile Exchange’s Material Change Index programme.

No significant impact yet from Covid-19 pandemic in the first quarter 2020:

• Group sales revenues at 247 million euros approximately 15 percent below prior year’s level, but slightly above the guidance corridor (220 to 240 million euros) as published in March 2020
• Decline in Group sales due to changes in the lithium-ion battery supply chain in the business unit Graphite Materials & Systems (GMS) as well as restructuring-driven lower sales in Textile Fibers in the business unit Composites – Fibers & Materials (CFM)
• Group recurring EBIT approximately 50 percent below prior year level at 9 million euros and at the upper end of the guidance corridor (mid to high single-digit million euros amount)
• Due to timely implemented measures and in contrast to the usual seasonal pattern, liquidity of approximately 150 million euros as of March 31, 2020 developed very favorably compared to year-end 2019 (137 million euros)
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: “We acted decisively and took various measures at an early stage, both to ensure the safety of our employees and to mitigate the economic impact of the pandemic.”
• Guidance for the full year 2020 remains suspended due to the impacts of the Covid-19 pandemic; decline in Group sales revenue and negative Group recurring EBIT expected for the second quarter 2020

In the first quarter 2020, SGL Carbon has not yet been significantly impacted by the Covid-19 pandemic and reached sales revenues slightly above the guidance corridor of 220 to 240 million euros published on March 12, 2020. In total, Group sales at 247 million euros was approximately 15 percent below the prior year level. The development is primarily attributable to changes in the lithium-ion battery supply chain in the business unit Graphite Materials & Systems (GMS) as well as to restructuring-driven lower sales in Textile Fibers in the business unit Composites – Fibers & Materials (CFM). As planned, Group recurring EBIT decreased by approximately 50 percent to 9 million euros and thus reached the upper end of the guidance corridor of a mid to high single-digit million euros amount.

As the global measures taken to contain the pandemic led to disruptions in production and supply chains in April and early May 2020, a significant double-digit percentage decrease in Group sales revenue and a negative Group recurring EBIT are expected for the second quarter 2020.  

SGL Carbon implemented various measures to counter the economic impact of the pandemic at an early stage. For this reason, liquidity developed very favorably compared to year-end 2019 and in contrast to the usual seasonal pattern and improved from 137 million to approximately 150 million euros.

Energiapura – Production of reusable, customised protective masks that are also fashion accessories

• The Italian company, a specialist manufacturer of functional sportswear, conducted research and began producing masks in response to the COVID-19 crisis
• Using Mimaki sublimation printers, the masks can be customised, getting away from their connotation with hospitals and transforming them into a fashion accessory

From functional sportswear to combatting the spread of the Coronavirus: Energiapura, an Italian company has developed a mask that meets the Class I medical device requirements. The EP PA 2020 (Energiapura Pure Air) facial device, optimised for air filtering and breathability, provides protection while working, and can be reused. But Energiapura has gone even further, branding and customising the masks with sublimation printing.
The EP PA 2020 mask, compliant with 93/42 EEC Medical Devices – Class I washable, meets the essential requirements of UNI EN 14683:2019. Having redirected the manufacturing process, Energiapura is now stepping up production levels to meet the rising demand from hospitals, pharmacies, chemists, companies and consumers.

Pure Air, Energiapura’s mask
The EP PA 2020 is based on a functional concept: protection, breathability and reusability are the main principles. EP PA 2020 is made up of three layers of fabric: the first, the outer layer, is DWR-treated polyester, the second is TNT polyester, providing a filtering function, and the third, which comes into contact with the face, is polyester containing special fibres, such as coolmax and carbon.  Therefore it can be reused via normal washing and steam ironing, which also sterilises it.
The CEO of Enegiapura, Alberto Olivietto explains the idea of the customisation of the mask: “We wanted to disassociate our masks from the hospital image. By decorating them with company branding and designs provided by customers.” This is where the Mimaki JV300 wide-format printer comes in.