From the Sector

• Innovative BCF S8 platform technology opens up new carpet yarn industry markets for Oerlikon Neumag customers

World premiere at the DOMOTEX World Trade Fair for Carpets and Floor Coverings in Hanover: between January 11 bis 14, 2019‎, Oerlikon Neumag will be showcasing its innovative new development, the BCF S8, to a wide audience for the very first time in Hall 11, Stand B36. Whether commodities or niche products – the new BCF S8 platform technology offers manufacturers of BCF carpet yarns decisive arguments for responding to constantly rising cost pressures and the trend for greater efficiency and quality in fiercely-competitive markets. World record: the system achieves never-seen-before spinning speeds and is able to simultaneously spin up to 700 filaments and produce fine titers of up to 2.5 dpf. This superlative performance is guaranteed by numerous individual innovations in the new platform and, for the first time, also in a new human-machine interface (HMI)-based control system, which opens the door to the digital age of smart carpet yarn manufacturing wide. At the ITMA ASIA 2018, the Oerlikon Manmade Fibers segment had already announced that it would be presenting revolutionary solutions in 2019 – both in hardware and software. And the DOMOTEX marks only the start.

According to manufacturer information, the new BCF S8 is the most efficient Oerlikon Neumag BCF system of all times. “We have succeeded in achieving a new level of greater productivity and even broader product diversity. These allow our clientèle to better cater to changing market requirements and achieve a competitive edge in tough market conditions”, explains Martin Rademacher, Vice President Sales Oerlikon Neumag. As a pre-taste, the machine specialists from Neumünster are serving up performance figures and results from comprehensive trials conducted at their own BCF technology center as well as from two pilot systems which have been tried and tested within the market for months now.

BCF S8 performance in numbers
With up to 700 potential filaments per yarn end, the BCF S8 is raising the benchmark considerably compared to the Oerlikon Neumag S+ BCF system (400 filaments) that has dominated the global market to date. Oerlikon Neumag guarantees fine titers of up to 2.5 dpf. Furthermore, the process speed is higher than ever before – 3,700 m/min (winder speed). This permits throughputs of up to 15 percent greater compared to predecessor technologies. Overall, system efficiency is 99 percent – almost unbeatable. True to the Oerlikon Segments Manmade Fibers segment e-save philosophy, energy savings of up to 5 percent per kilogram of yarn are achievable.

BCF S8 innovations – from straight yarn paths to large cooling drums

This comprehensive progress has been achieved with numerous smart innovations. To this end, one key element above all has been optimized. The yarn path from the spinning system to the new, large cooling drum has now been almost completely straightened. This yarn path, unique to the BCF market to date, ensures that the individual filaments are subjected to minimum friction, hence once again considerably reducing yarn breaks and optimizing the overall production process. Especially noteworthy here are the, for the first time, straight yarn inlet in the texturing head – guaranteeing superior yarn quality.

And the considerably reduced distance between the heating godet duo and the texturing head also has a positive impact on the texturing process. It ensures a more even twist to the yarn and reduces the compressed air consumption. Furthermore, the texturing chambers can be removed individually, which additionally shortens servicing times. The now closed units also provide the best possible protection for the texturing jets and lamellar chambers.

The 800-mm diameter cooling drum optimally and gently cools the filaments. And this has a positive influence on the yarn quality. The new cooling drum is now equipped with a V groove for all polymers (PET, PA6 and PP) as standard.

The RoTac3 tangling unit, already established within the market, once again reduces the compressed air consumption by around 50%, while the newly-developed Witras III-37 winder achieves production process speeds of 3,700 m/min.

First intuitively-operable human-machine interface (HMI)
The new BCF S8 is the first Oerlikon Manmade Fibers segment system equipped with the innovative human-machine interface (HMI) for intelligent controlling and monitoring. In this case, the interface between man and machine has been oriented on the daily requirements of users in BCF production. With its new ‘look and feel’, it supports intuitive operation and offers direct access to important information as well as actual and target values at each take-up position by means of a touch screen. A completely new ‘alarm philosophy’ also simplifies troubleshooting and malfunction analysis. “This smart HMI system is a logical step in the digitalization of our products”, explains Dr. Friedrich Lennemann, Vice President R&D Oerlikon Neumag.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

During production, some of the aniline stays locked into the indigo pigment and is difficult to wash off the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. As a result of its toxicity (more hazardous than alkylphenols) it is now starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers.

The new Denisol® Pure Indigo 30 liq was therefore developed as an aniline-free* indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Archroma tested Denisol® Pure Indigo at Absolute Denim mill in Thailand. Archroma wanted to be sure that the new indigo dye would perform exactly the same as conventional indigo.

James Carnahan, Head of Sustainability at Archroma, comments: “At Archroma we continuously challenge the status quo in the deep belief that we can make our industry sustainable - but we cannot do it alone. Without forward-thinking manufacturers such as Absolute Denim to consciously adopt these eco-advanced innovations in their daily production, like our aniline-free* Denisol® Pure Indigo, we will not be able to move this industry forward on our resource-constrained world we live in. As consumers are increasingly aware of, and concerned about, climate change and ecological threats, this is not only the right thing to do - it is also good for business.”

“Deep down inside most of us want the world to be a better place for our loved ones and for future generations,” insists Vichai Phromvanich, Board Member, Absolute Denim, “starting with how we live, what we eat, what we wear, still trying to be cool, fashionable, still trying to be environmentally conscious. Archroma’s aniline free indigo project is therefore something we as a new generation manufacturer have supported from the beginning, by opening our doors for tests in the project phase, and now by sending out our articles to many of our customers. For us, after all, a nice pair of jeans looks even nicer without aniline!”

* Below limits of detection

A constantly evolving market and new global challenges ask for exciting concepts that unite the most forward-thinking players of the industry. For the show in January 2019, SEEK enters the next level with its TRADE UNION concept.
“At SEEK, we always look for new strategies to meet the demands of our valued buyers and brands”, explains SEEK Director Maren Wiebus. “Within that community spirit, TRADE UNION was created to enhance business opportunities for both sides. Moving away from a classic competitive model, SEEK’s TRADE UNION is about defining goals collaboratively – and achieving them together.”
 
SEEK’s 10th Anniversary marks an important moment not just for the event itself, but also for the TRADE UNION movement: with further development and relocation into the foyer of Arena Berlin, which highlights and strengthens this cooperative approach. Relevant buyers will be provided with special services and be able to reach an even more targeted brand audience what makes all parties benefit from this individual concept.
With his distribution agency Haptiques Felix Engelmann supports the TRADE UNION idea from the beginning and emphasizes the time saving aspect: “The few days in Berlin are always very important for my company so that I aim to max the business days as much as possible. The SEEK team is very empathic about the market needs and already started talking about the new concept inside of SEEK several seasons ago. We are looking forward to work with our partners and colleagues in an extra space where we are able to value the time and make the life of buyers, press and brands easier.”

And Engelmann is not the only fan of this concept that Wiebus and team developed together with their long-term partners.
''The TRADE UNION is a fantastic concept aimed at giving brands with a true heritage an opportunity to sit together in one personal space. We feel that this will give our brands an opportunity to be shown in the best light possible, within a relaxed environment,” explains Joe Sharpe, Sales Director at Options. “We’re excited to be a part of the Trade Union and looking forward to seeing existing and potential clients in January.

Denim Expert Ltd. are very proud that they have been accepted to join as a contributor to the Zero Discharge of Hazardous Chemicals (ZDHC) Foundation, The ZDHC missions is to enable brands in the textile, apparel, and footwear industries to implement chemical management best practices and advance towards zero discharge of hazardous chemicals by collaborative Engagement, Standard Setting and Implementation.

The main goals are set to eliminate priority hazardous chemicals in products and their manufacture, implement a transparent screening process to promote safer chemistry, implement common tools, best practices and training that advance chemical stewardship, partner with stakeholders to promote transparency of chemical usage and discharge and promote scaling of best practices through engagement with key stakeholders.
 
Under the guidance of the ZDHC Foundation, Denim Expert Ltd. have adopted various initiatives to ensure the zero discharge of hazardous chemicals, including:

• The establishment of traffic signals in the chemical store-room to aid in the safe storage of chemical product.
• The mandatory use of protective gloves when handling chemicals.
• The introduction of a chemical compatibility chart to ensure safe storage of chemicals and highlight their risk factor.
• Visible posting of Material Safety Data Sheet (MSDS) enabling close follow-up of chemical use.
• The installation of the appropriate ventilation and  temperature control in the chemical storage area.
• Establishment of an emergency response plan, with any potential chemical spillage being monitored by a specially trained technical representative.
• Clear labelling on all chemicals following ZDHC guidance.
• Strict adhesion by all employees to the chemical inventory list.
• Allocation of a designated area for chemical waste disposal and treatment.

With its membership of the ZDHC, Denim Expert Ltd. joins more than 24 signatory brands, 59 value chain affiliates, and 15 associates (including Adidas, Benetton, BURBERRY, C&A, COOP, ESPRIT, Gap Inc. , G-STAR RAW, H&M,INDITEX, Jack Wolfskin, Lbrands, LEVI STRAUSS & CO, LI-NING, MARKS & SPENCER, Hugo Boss, Nike, Primark, Puma, PVH, Target)  who are collectively working together to support implementation of safer chemical management practices.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

Oerlikons business unit Nonwoven will cooperate with the Chinese machine and plant manufacturer Shaoyang Textile Machinery for nonwoven solutions in the hygiene market. This was announced by the Manmade Fibers segment at ITMA ASIA + CITME 2018.

The aim of both cooperation partners is to jointly advance the international sales of Spunmelt lines for hygiene applications in the field of disposable nonwovens outside China.
Oerlikons business unit Nonwoven will be responsible for the entire project in the future. To this end, the Neumünster-based company will contribute its know-how in plant engineering to the partnership. Additionally, Oerlikon acquires the CE certifications of all exported Shaoyang Spunmelt lines. Oerlikon will also be responsible for product and process guarantees and will provide worldwide customer services outside China. Shaoyang Textile Machinery, on the other hand, supplies the Spunmelt plant technologies.
"With Shaoyang Textile Machinery, we have found a renowned Chinese plant manufacturer with extensive know-how in the construction of Spunmelt plants for hygiene applications, which achieves international standards with its nonwoven qualities," explains Oerlikon Manmade Fiber Segment CEO Georg Stausberg.
Rainer Straub, Head of Oerlikons Nonwoven Business Unit, adds: "The partnership with Shaoyang Textile Machinery enables us to gain a foothold in the highly competitive hygiene market. Our many years of engineering experience guarantee our customers production lines according to international
standards for high-quality nonwovens".

This autumn, following the success of the first collaboration with Swizz Beatz, Bally joins forces on another unique collection with the Grammy Award-winning music producer and global entrepreneur, inviting meticulously talented pioneer of aerosol X-ray art SHOK-1 to conceptualise and direct a new capsule collection which presents a diagnostic look at contemporary culture through cutting edge expression.

A founding member of the street art movement and a scientist with a degree in Applied Chemistry, SHOK-1 selected three key icons from his back catalogue - X-ray paintings of a hand gesture, a fly and ’The Consumer’ - that symbolise subcultures from his youth that also connect to Bally’s past. The artworks are represented across shoes, accessories and ready to wear. Talking about his vision for the project, SHOK-1 explained that he wanted ‘the collection to speak to the longstanding tradition of subcultures co-opting brands that weren’t meant for them.’ ‘I strongly believe that quality and excellence are universal concepts that can transcend class and cultural boundaries. The Bally that I remember as a kid has this fantastic relationship with subculture. It’s also a brand that has the same kind of attention to detail and production values that I aspire to in my own work, so there was a synergy there.’ Familiar with SHOK-1’s work, Swizz Beatz saw the potential and contacted him to discuss the opportunity: ‘SHOK-1 is a master artist and I chose him because our focus for this capsule was on exploring the art of X-ray and he’s a legend at his craft.’

As with all Bally collaborations, the metamorphosis that naturally evolves from creative cooperation is integral to the process.  Part of the ‘Bally Collective, curated by Swizz Beatz’, this collaboration continues the brand’s commitment to creating a platform to playfully empower artistic license across emerging and established talent.

The exclusive collection will launch in Bally stores worldwide and bally.com in October 2018.

• Italian expertise, research and green innovation.
• METALBOTTONI ups the stakes with one-of-a-kind interpretations, to enhance its market presence.

At Première Vision Accessories (Paris, 19-21 September) the company presents the new collection VÀNITA, a mix of leatherwear and sportswear, based on Made in Italy craft, with an increasingly wide and coordinated range.

Based on product experience, combining new trends in accessories. The METALBOTTONI strategy is enriched with product novelties which aim at exploring new existing market segments. A strategy which increasingly leads great artisan production skills to meet constant research and expansion of the range, with the world of sportswear becoming more and more pivotal; without forgetting the important sustainable innovations of the NO IMPACT protocol.

No Impact becomes “Committed Accessories”

The guideline for restyling the METALBOTTONI range over the past two years has been the recent implementation of the NO IMPACT corporate sustainability protocol, which has just acquired a new “dress”, associated with the following pay-off: “Committed Accessories”. It is a way of underscoring the constant green development of the company over the past few years, in terms of process and product: use of recycled raw materials, development of finishing without chemicals, implementation of processes which today have allowed to reduce electricity and water consumption to almost zero.

Moreover the range of NO IMPACT proposals for this season has expanded to include not only new metal finishing but also leather label completely made from processing scrap, thus establishing Metalbottoni as “partner for branding elements” also in terms of sustainability. Pure Made in Italy and constant expansion of collections towards sportswear The great skill in metal processing, which for sixty years now has characterised the top-of-the-range quality of METALBOTTONI products, is now combined with constant research work conducted by our in-house Style Office, resulting in new collections which are more and more in line with the trends emerging from major trade fairs. Maintaining a presence on strong markets (central Europe, Northern Europe and United States), increasing the depth of segments and intercepting new ones. This is the main goal also chosen for the Première Vision Accessories Exhibition where, alongside the autumn-winter 2019/2020 collections, there will be a preview of VÀNITA, the new collection dedicated to leatherwear and more.

METALBOTTONI is proving to be one of the most dynamic companies in the accessory industry.

Over the past two years, in fact, it has introduced numerous product and process innovations, aiming at increasing its range especially as regards sportswear accessories. This trend was driven by a substantial increase in demand by read-to-wear and luxury brands in the past two seasons, and today it means new proposals which account for 35% of the range for METALBOTTONI. New collections have been presented in the past two seasons expressly dedicated to the sportswear world, namely GRAVITA, the first line designed by the company for pressure buttons, and MÀRYA, the new beachwear collection. Also the line called LABORA, the classic collection of accessories for fashion and ready-to-wear has been constantly enhanced with proposals combining style and technical performance. This mix of fashion and sport elements is increasingly evident in the company’s product range, for example in the combination of different materials, using metal with nylon or other resins to create new and unique accessories.

Vànita: beyond leatherwear, a world of accessories

The meeting between fashion, luxury and sportswear has produced VÀNITA, the brand new collection which presents a new approach to accessories dedicated to leatherwear, from an allround perspective from luxury to sportswear. Developed starting from solid product research by the company’s in-house Style Office, VÀNITA is a true meeting of styles and elements, a combination of high product standards with unique elegance. This line introduces one-of-a-kind visions for accessories, exploring highly original pathways dedicated to the world of leather. The VÀNITA proposal ranges from accessories for leatherwear and small leatherwear, to those for shoes, bags and the sportswear worlds. There are two main lines within this collection: one is expressly designed for the world of luxury, the other has a more technical and sporty approach. A true mix between artisan metal processing, based on the great METALBOTTONI expertise in this sector, and “ingredients” such as nylon, rubber finishes or innovative 3D processing, which are often combined together.

“Our goal is to offer an increasingly comprehensive range which allows us to explore new segments on the markets where we are present” - says Gregorio Valli, CEO and President of METALBOTTONI S.P.A – “a ‘recipe’ which should be able to integrate our unmatched product expertise with a constant expansion of our range and continuous implementation of our pathway towards corporate responsibility and sustainability”.

The Aachen Center for Integrative Lightweight Production (AZL) of RWTH Aachen University is installing a new ENGEL injection molding system in its technical center. Engel Deutschland GmbH – in cooperation with the ENGEL Centre for Lightweight Composite Technologies in Austria – will install the 2-component injection molding system with turning plate and 17,000 kN clamping force in 2019. This machine setup is the basis for further developments of efficient inline-combination technologies using different kinds of polymer performance materials.

The ENGEL injection molding system will enable innovative combinations of already established fiber-reinforced plastics (FRP) processes and the development of new individual processes. The focus is on increasing resource efficiency in lightweight production. With the new equipment, new research and development initiatives can explore the more efficient use of materials, which are eventually the key to the mass production of lightweight components. The research will address multi-material systems, continuous processes, process chains as well as self-optimizing processes.

Dr.-Ing. Michael Emonts, Managing Director of the Aachen Center for Integrative Lightweight Production (AZL) is looking forward to realizing new innovative lightweight production process with the new injection molding system: “This new injection molding system offers us as specialists for lightweight production technology in cooperation with the injection molding experts of the Institute of Plastics Processing – the IKV – the opportunity to establish hybrid processes for industrial lightweight applications. The system will expand our existing machinery in the AZL Technical Center and will be available as an important platform for lightweight production research at RWTH Aachen University.”

Being a Partner of the AZL, ENGEL has already been working closely with the AZL for many years as a Partner Company of the AZL Partner Network. Dr. Stefan Engleder, CEO of the ENGEL Group, emphasizes the importance of close collaboration with technical universities and especially with the AZL: “The AZL provides great conditions for industry-related research activities in the field of lightweight composites as it is characterized by a strong interdisciplinary approach. It benefits from the great infrastructure and the collaboration with well-known institutes of the RTWH Aachen University. ENGEL is looking forward to working together with the AZL on developing efficient lightweight composite mass production processes.”

In addition to the numerous composite and lightweight equipment at the RWTH Aachen Campus, the AZL Technical Center comprises large-scale equipment for the development of processes for lightweight production, such as a composite press from Schuler Pressen GmbH with 18,000 kN clamping force.

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material
In 2016, Borealis acquired leading German recycler mtm plastics GmbH, which is now a member of the Borealis Group. By leveraging their respective areas of expertise and decades of experience as a virgin polyolefins producer and “upcycler”, respectively, Borealis and mtm plastics are exploring new growth opportunities with joint forces.

A success story originating from this exploration is a recently completed pilot project with Henkel, the global leader for adhesives, sealants and functional coatings. The companies have worked to develop a new packaging solution based on recycled material for the Made-at-Home all-purpose glue bottle and cap, which Henkel is marketing under its well-known Pattex brand.  The aim was to replace the virgin plastic material traditionally used for this packaging with a recyclate-based resin. The resin, however, had to fulfil the diverse material demands for packaging of an adhesive product.

After extensive and joint application development, a new bottle was developed with the proprietary mtm product Purpolen® PE, a high-quality polyethylene regranulate produced by mtm at its facilities in Niedergebra, Germany. Value chain partner KKT Kaller Kunststoff Technik GmbH, a plastics processor also based in Germany, manufactured the bottles. For the three separate components of the adjustable applicator nozzle, which is used for both filigree and wide-area gluing, high-quality Purpolen® PP polypropylene regranulate produced by mtm was identified as the ideal solution. German plastic components manufacturer bomo trendline Technik GmbH produced the applicator nozzles.

The new Pattex Made-at-Home packaging solution successfully passed extensive application tests, including a three-month storage test and other tests of mechanical properties. It was launched on the European market in 2018.

“Our commitment to leadership in sustainability is deeply embedded in our companies´ values,” explained Matthias Schaefer, Project Manager for Global Packaging Engineering at Henkel Adhesive Technologies. “We are at the forefront of the industry when it comes to new sustainability strategies in packaging.  Thus, we identified Pattex Made-at-Home as a candidate for exploring the use of recyclate instead of virgin plastics. This constructive collaboration with our partners proves the viability of 100% PCR material for an adhesive product like Made-at Home. It also underscores our efforts at Henkel to drive leadership in sustainability in the consumer goods sector.”

“As a virgin polyolefins producer, Borealis is thrilled to be among the pioneers in using plastic recyclate in new applications,” says Günter Stephan, Head of Borealis Circular Economy Solutions. “Even though momentum is gaining in the drive to increase the circularity of plastics, we still need to prove without a doubt within the industry that using recyclates – and even 100% PCR – is a suitable and effective option, even for demanding applications. Thanks to this successful value chain cooperation with our partners Henkel, KKT and bomo, we are giving plastics a second life and are thus one step closer to the goal of a more circular economy of plastics.”