From the Sector

Reset
584 results
Pilatus & Hexcel AGENCE APOCOPE
Pilatus & Hexcel
22.05.2017

Pilatus aircraft ltd PC-24 super versatile jet built with Hexcel composite materials on display at geneva show

Pilatus is displaying the PC-24 at the European Business Aviation Convention and Exhibition, taking place in Geneva on May 22-24. This highly versatile jet is able to take off and land on very short runways and unpaved strips due in part to the composite-intensive structure, which makes great use of Hexcel’s composite materials and adhesive.

Hexcel’s HexPly® 8552 woven prepreg in carbon and glass variants is used to manufacture a number of the aircraft components including the belly fairing, which is the largest composite structure on the aircraft. HexPly® 8552 is one of Hexcel’s most successful and widely used prepregs for aircraft programs including commercial aircraft and fighter jets. Hexcel’s Redux® 319 epoxy film adhesive is also used for bonding the composite structures. The PC-24 is in the final stages of its certification program following the first flight of the third and final test aircraft on March 6 2017. The aircraft is scheduled for certification and entry into service in the 4th quarter 2017. Pilatus has so far secured 84 orders for the PC-24, which equates to three years of production.

Pilatus is displaying the PC-24 at the European Business Aviation Convention and Exhibition, taking place in Geneva on May 22-24. This highly versatile jet is able to take off and land on very short runways and unpaved strips due in part to the composite-intensive structure, which makes great use of Hexcel’s composite materials and adhesive.

Hexcel’s HexPly® 8552 woven prepreg in carbon and glass variants is used to manufacture a number of the aircraft components including the belly fairing, which is the largest composite structure on the aircraft. HexPly® 8552 is one of Hexcel’s most successful and widely used prepregs for aircraft programs including commercial aircraft and fighter jets. Hexcel’s Redux® 319 epoxy film adhesive is also used for bonding the composite structures. The PC-24 is in the final stages of its certification program following the first flight of the third and final test aircraft on March 6 2017. The aircraft is scheduled for certification and entry into service in the 4th quarter 2017. Pilatus has so far secured 84 orders for the PC-24, which equates to three years of production.

More information:
Pilatus, Hexcel, Jet
Source:

AGENCE APOCOPE

Hexcel AGENCE APOCOPE
Hexcel
19.05.2017

Hexcel exhibiting at SAMPE Seattle 2017

Hexcel is exhibiting at the SAMPE 2017 technical conference May 23-24, in booth G11, in Seattle, Washington, U.S. to promote its latest materials for aerospace and industrial applications. Specialists from Hexcel’s carbon fibers, reinforcements, prepregs, honeycomb and engineered core groups will be there to speak with attendees about Hexcel’s wide variety of products and offerings.

Hexcel is exhibiting at the SAMPE 2017 technical conference May 23-24, in booth G11, in Seattle, Washington, U.S. to promote its latest materials for aerospace and industrial applications. Specialists from Hexcel’s carbon fibers, reinforcements, prepregs, honeycomb and engineered core groups will be there to speak with attendees about Hexcel’s wide variety of products and offerings.


This year at SAMPE Seattle Hexcel will be promoting its HiTape® dry carbon fiber reinforcements with a C spar panel and co-infused stringer. This display shows the high forming capability of HiTape® reinforcements and how the technology can be used to co-infuse stringers and C spar panels. It is also representative of an aircraft wing construction. HiTape® dry carbon fiber reinforcements are designed for the automated manufacture of preforms at very high deposition rates. The dry preforms are infused with Hexcel’s HexFlow® RTM6 resin for a cost-efficient out-of-autoclave manufacturing process for next generation aircraft structures. Parts produced with HiTape® reinforcements and Hexcel’s HexFlow® infusion resins can be up to 30mm thick with a 58 to 60% fiber volume content, resulting in mechanical properties that are as high as those achieved with primary structure prepregs.

More information:
Hexcel, Sampe Seattle, 2017
Source:

AGENCE APOCOPE

Patagonia’s Clean Color Collection Archroma
Patagonia’s Clean Color Collection
15.05.2017

Archroma’s EarthColors selected in Patagonia’s newest Clean Color Collection

 Patagonia’s Clean Color Collection is a new capsule collection that Patagonia has just released in the last days of April. The products in the collection have been colored with dyes made from natural sources, including, along with other supply sources, EarthColors by Archroma, a range of dyes synthesized from agricultural waste.
Many of Patagonia’s synthetic dyes use less water, energy and CO2 when compared with conventional processes, however Patagonia is always looking for ways to do less environmental harm. The company, who already collaborates with Archroma for the Patagonia Denim collection based on Archroma’s Advanced Denim, therefore contacted Archroma to have a closer look at Archroma’s EarthColors dyes. The selected EarthColors dyes are the gorgeous Palmetto Green and Citrus Brown colors made respectively from non-edible palmetto green parts and bitter orange peels left over from agriculture industry or pharmaceutical extraction.

 Patagonia’s Clean Color Collection is a new capsule collection that Patagonia has just released in the last days of April. The products in the collection have been colored with dyes made from natural sources, including, along with other supply sources, EarthColors by Archroma, a range of dyes synthesized from agricultural waste.
Many of Patagonia’s synthetic dyes use less water, energy and CO2 when compared with conventional processes, however Patagonia is always looking for ways to do less environmental harm. The company, who already collaborates with Archroma for the Patagonia Denim collection based on Archroma’s Advanced Denim, therefore contacted Archroma to have a closer look at Archroma’s EarthColors dyes. The selected EarthColors dyes are the gorgeous Palmetto Green and Citrus Brown colors made respectively from non-edible palmetto green parts and bitter orange peels left over from agriculture industry or pharmaceutical extraction.


EarthColors is a line of plant-based dyes, sourced from up to 100 percent renewable resources. The colors change and fade over time, which is part of what makes these dyes unique.
“We are so proud that, once again, Patagonia has chosen Archroma’s eco-advanced dyeing technologies for their newest sustainable clothing endeavor,” comments Paul Cowell, Head of Brand Marketing in Archroma’s Brand & Performance Textile Specialties business. “We at Archroma are committed to challenge the status quo in the deep belief that we can make our industry sustainable. Because it’s our nature! Trail blazers like Patagonia bring us invaluable support in accelerating sustainable concepts in the textile value chain. Together we are showing the apparel industry the way to go, one collection at a time.”

Source:

Archroma

imat-uve GmbH imat-uve gmbh
imat-uve GmbH
08.05.2017

imat-uve at Techtextil 2017 in Frankfurt

The world's leading trade fair for technical textiles, techtextil, will be held in Frankfurt from 9 to 12 May 2017. It is regarded as one of the leading international trade fairs for technical textiles and nonwovens, where decision-makers, developers and purchasers of the textile industry meet for exchange.
imat-uve will once again be exhibiting with its services around the design, development and testing of materials and textiles. At the booth G80 in hall 3.0, the visitors will find themselves in the middle of the imat-uve creative lab where the company presents itself with current projects. Among other things, this is a selection of innovative textile materials from the company's material library, which are developed further for specific requirements. Research projects show how textile innovations, for example at the car seat, ensure sustainable production and improved seating comfort.

The world's leading trade fair for technical textiles, techtextil, will be held in Frankfurt from 9 to 12 May 2017. It is regarded as one of the leading international trade fairs for technical textiles and nonwovens, where decision-makers, developers and purchasers of the textile industry meet for exchange.
imat-uve will once again be exhibiting with its services around the design, development and testing of materials and textiles. At the booth G80 in hall 3.0, the visitors will find themselves in the middle of the imat-uve creative lab where the company presents itself with current projects. Among other things, this is a selection of innovative textile materials from the company's material library, which are developed further for specific requirements. Research projects show how textile innovations, for example at the car seat, ensure sustainable production and improved seating comfort.

Source:

imat-uve gmbh