From the Sector

Brandon Hall ist seit Mitte Juni neuer Director Consumer bei der Optima Tochtergesellschaft Optima Machinery Corporation in Green Bay (Wisconsin, USA). Optima stärkt damit den Vertrieb von Abfüll- und Verpackungsanlagen für den Konsumgüter-Markt in Nordamerika und trägt dem positiven Wachstum im Geschäftsbereich Consumer Rechnung.

Hall bringt mehr als 30 Jahre Erfahrung in den Bereichen Fertigung, Technik, Produktdesign und Geschäftsentwicklung mit. Bevor er zu Optima kam, war Hall Strategic Business Unit Manager bei einem der weltweit größten System- und Komponentenlieferanten für die Lebensmittel-, Getränke- und Pharmaindustrie. Er hat mehrere Studienabschlüsse in Betriebswirtschaft und Maschinenbau. „Ich freue mich sehr auf Optima und die Möglichkeit, das Wachstum des Geschäftsbereichs Consumer weiter voranzutreiben”, sagt Hall über seine neue Aufgabe.

Silence and resource efficiency are the order of the day in the development and optimization of electric vehicles. On the one hand, ever stricter emissions regulations worldwide are increasing demand for components that reduce noise pollution while helping vehicle manufacturers meet their sustainability targets. On the other hand, the absence of noise from the combustion engine in e-cars amplifies the disruptive effects of other noise sources in the passenger compartment. With Ultra-
Silent Tune, Autoneum now presents a new lightweight and environmentally friendly technology for underbody shields that reduces tire rolling noise both outside and inside the vehicle, thus improving not only acoustic performance but also driver comfort in electric cars.

Autoneum's Ultra-Silent Tune technology owes its sound-absorbing performance to acoustic chambers of different shapes and sizes. The chambers are created by applying an embossed polyester foil to the side of the Ultra-Silent underbody shield facing away from the noise source: they capture the sound waves emitted by the car tires, modulate them according to their respective geometry and reflect them back onto the porous carrier material. Compared to conventional single-layer underbody shields, whose acoustic performance is mainly determined by the noise-reducing properties of the product side facing the tires, Ultra-Silent Tune exploits both sides of the component, which significantly improves its acoustic absorption. Autoneum thus makes innovative use of the proven concept of traditional chamber absorbers, reducing exterior tire rolling noise.

Moreover, Ultra-Silent Tune combines optimized acoustic performance with the sustainability benefits of Autoneum's Pure technology Ultra-Silent. In addition to the high proportion of recycled PET fibers, underbody shields made from Ultra-Silent Tune can be manufactured from 100% polyester and thus be fully recycled at the end of vehicle life. Furthermore, the thickness of the multilayer construction can be flexibly adapted to the packaging spaces of different vehicle models. Underbody shields made from Autoneum's new Ultra-Silent Tune technology are already in pre-development at various vehicle manufacturers in Europe.

Linda Klopsch zur Geschäftsführerin der Texoversum Experts & Training Hub gGmbH bestellt, die im von Südwesttextil gespendeten Leuchtturm für textile Ausbildung und Lehre ihren Standort haben wird.

Seit 01.06.2023 ist Linda Klopsch Geschäftsführerin der Texoversum Experts & Training Hub gGmbH (i.Gr.). Nach ihrem Studium der Textiltechnologie in Reutlingen, entwickelte die 35-Jährige am Deutschen Zentrum für Luft- und Raumfahrt e.V. faserverstärkte Keramiken. Ein High Performance Material, welches vor allem auf Grund seiner hohen Temperaturbeständigkeit in Flugzeug- und Raketentriebwerken eingesetzt wird. Zuletzt leitete Linda Klopsch die Abteilung Keramische Verbundstrukturen. Am Institut für Materials Resource Management der Universität Augsburg übernahm sie darüber hinaus eine Lehrbeauftragung im Bereich textiler Flächenerzeugnisse und deren Herstellung, um ihre Faszination für die Vielfalt dieser Produkte weiterzugeben.

Die Texoversum Experts & Training Hub gGmbH i.Gr. ist eine hundertprozentige Tochter von Südwesttextil. Sie entwickelt die bewährten Angebote der GATEX weiter, die seit den 80er Jahren in Bad Säckingen u. a. die überbetriebliche Aus- und Weiterbildung der Textilindustrie aufgesetzt und geschult hat. Dazu kommen zahlreiche neue Angebote – für alle Menschen, die sich mit Textil beruflich beschäftigen oder interessiert sind.

Für die nächsten Jahre ist die Ausrichtung des Unternehmens auch für die neue Geschäftsführerin klar: „Genauso wenig wie Leichtbau oder Bekleidung von Textil zu trennen sind, wird die Texoversum Experts & Trainings Hub gGmbH von einer Aus- und Weiterbildung trennbar sein, die stets am Puls der Zeit ist. Am Texoversum denken wir die Zukunft Textil!“

Nylon 6, nylon 6,6, polypropylene, PET and calcium carbonate are available through the company’s proprietary carpet recycling process

Circular Polymers by Ascend, a market-leading recycler of post-consumer carpet, today the launch of Cerene™, a line of recycled polymers and materials made from the company’s proprietary carpet reclaiming technology. Cerene is available as polyamide 6 and 66, PET, polypropylene and calcium carbonate as a consistent,
sustainable feedstock for many applications, including molding and compounding.
Recycling experts from Circular Polymers will be showcasing Cerene at Compounding World Expo on June 14-15 at the Messe Essen in Germany.

Ascend Performance Materials, a fully integrated producer of durable high-performance materials and the majority owner of Circular Polymers by Ascend, is known for its innovations in nylon 6,6. Cerene will continue that legacy with offerings in nylon 6,6 while also bringing to market recycled polymers such as nylon 6, PET and PP.

“Customers around the globe are seeking consistent and reliable post-consumer recycled materials,” said Maria Field, business director of Circular Polymers by Ascend. “Cerene is mechanically recycled using a process that minimizes our carbon footprint and environmental impact.”

Circular Polymers by Ascend converts post-consumer carpet into fiber and pellets. The company uses a proprietary process in its California-based facilities to achieve high efficiency in recycling, successfully providing a new life for virtually every component of the carpet and backing. The company has redirected 85 million pounds of carpet from landfills into new goods since 2018.

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

At ITMA 2023, Kornit will also be displaying an end-to-end partner ecosystem – underscoring how integrated solutions ensure a smooth transition towards a digital infrastructure and enable long-term business growth. Highlighting the power of partnership alongside Kornit is Greentex.co, a supplier of textiles and apparel leveraging digitally enabled, eco-friendly waterless printing. The company will be showing Presto MAX with fabrics highlighting the depth of black inks. Working alongside Kornit, Zünd will demonstrate how its modular cutting systems is the foundation for an end-to-end “eco factory,” completing fashion decorated by Presto MAX with their digital cutting solutions. Pentek Textile Machinery joins to display the possibilities for inline, sustainable softening of fabrics for unique and demanding applications.

adidas and Bogey Boys are introducing the adidas x Bogey Boys collection featuring crisp designs and high-quality performance materials that combine vintage styles from golf and tennis with a modern feel, all for easy on- and off-course wear. The limited-edition capsule featuring apparel and footwear for men and women will be available at select locations beginning Wednesday, June 14.

The adidas x Bogey Boys capsule introduces classic, clean, and sporty designs that give golfers the chance to express their style.  In refined white, altered blue and collegiate green colorways, pieces from the collection include:

• Two four-button placket polos with a higher collar stand
• A striped silhouette as well as a solid pique option with piping at cuffs and chest pocket
• Terry cloth track suit (jacket and pants) with white 3-Stripes detailing and adidas x Bogey Boys branding
• V-neck sweater vest in collegiate green with checkered white and green contrasting across the shoulders and small contrast lines running through rib hem and armholes
• Straight-leg trouser made with adidas’ WARPKNIT material featuring pintuck detail down front and back legs along with piping around pockets for a crisp finish
• Terry cloth romper with zip-front pockets, elastic waistband with pin buckle, back-right welt pocket and contrast white binding at armhole and leg opening
• High-waisted skirt that features a side-zip opening, front and back seams with kick pleats, triangle pocket inserts with piping detail, and zipper pocket back-center and adidas’ WARPKNIT material
• Playful graphic tee that includes a 'Welcome to the Clubhouse' message on the back featuring characters dressed in pieces of the collection sketched by Macklemore and the adidas team.

There will be a handful of accessories to complement the range including a five-panel rope hat, leather golf glove, and leather travel bag featuring croc texture with metal feet and hardware.

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

"This wide range of technologies is necessary because the recycling process each of our customers choose depends on the type of plastic, the level of contamination of the input material, and which product will be made using the recycled pellets. Following the expansion of our Ansfelden site and with the new site nearby in St. Marien, we can now demonstrate all these processes, carry out test runs with customers' material and focus on development work independently of our Customer Centre," says EREMA's Managing Director Markus Huber-Lindinger.

EREMA is driving forward research and development work in the company's new R&D Centre. Two halls with a total area of 1,550 square metres and a new office building offering space for 50 workplaces has been built. Here, the company bundles cross-departmental test machines and laboratory facilities for post consumer and inhouse recycling applications. R&D is decentralised at EREMA. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology - all with the aim of meeting customer requirements and achieving the highest possible quality of recycled pellets.  

On the evening before Discovery Day, EREMA celebrated its 40th anniversary together with customers and partners. A review covered the company's history - from the first workshop in a garage in 1983, to its position today as a innovation pioneer and one of the market leaders.

Fong’s Europe will showcase the advanced features of its THEN Smartflow TSF at ITMA 2023.

These include the machine’s smart fabric transport system which ensures extremely even dyeing of the fabric through accurate control of the nozzle pressure and pump power, with movement through the machine via an PLC-controlled plaiting system and variable chamber adjustment depending on fabric characteristics.

The machine is equipped with a heat exchanger enabling it to heat the dyeing liquor quickly and efficiently, to reduce energy consumption. Its bath preparation unit and chemical dosing system ensure accurate and precise dosing of chemicals, dyestuff and salt, reducing chemical waste and optimising results while reducing process times.

The Smartflow TSF operates with a low liquor ratio of down to 1:2.5 with full loading of synthetic fabrics, which means that it requires less water to dye a given amount of fabric compared to traditional dyeing machines. This not only reduces the consumption of water and steam, but also the amount of wastewater generated.

The machine's control panel is easy to use, allowing operators to programme and monitor processes with ease.

DyStar, a specialty chemical company with a heritage of more than a century in product development and innovation, is announcing the sale of its auxiliary manufacturing site located at Pietermaritzburg, South Africa.

Oakland Polymers Pty Ltd, a local manufacturer, has acquired DyStar’s manufacturing facility and will take over the site to expand their polymer business. Under the sale and purchase agreement, DyStar divested the entire facility, which is approximately 12,000 sqm, to Oakland Polymers and Oakland Properties. DyStar Africa’s operations will continue to lease part of the premises from Oakland for office and warehousing use.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “The sale of the manufacturing site at DyStar Africa is part of our ongoing efforts to reconsolidate our business resources in Turkey, Africa & Middle East (TAME) region, with a focus on improving productivity and utilization rates.”

As a result of the acquisition, all employees at the manufacturing site have already been informed. Compensation packages are offered to affected colleagues as well.

Customers have also been informed of undisrupted supply to their orders during the transition period and are further assured of a seamless customer journey going forward when the acquisition is completed.

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.