From the Sector

Reset
701 results
Photo: AWOL
20.09.2022

Halley Stevensons: Unique waxed cotton finishing with new Monforts line

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

19.09.2022

ISKO opens CREATIVE ROOM GERMANY

  • First product development centre in Germany

ISKO has opened its second product development centre, based in Stade, Lower Saxony, following the success of the Creative Room London in the UK which had its opening earlier this year.

Creative Room Germany is a innovative space and the first of its kind in Germany. It is the latest initiative of Creative Room Services (CRS), a division of ISKO devoted to offering streamlined and simplified solutions for all denim requirements – from fabric to finished garment.

With a focus on sustainable washing and finishing techniques, customers of Creative Room Germany will be able to work in parallel with ISKO’s experts to achieve their desired denim looks. Together with machine technology partner Jeanologia, they have been able to develop innovative washing and finishing techniques that meet the highest quality and sustainability standards with a significantly lower environmental impact. Creative Room Germany will also be the central point for its customers full product development, ensuring the whole process is agile and more efficient.

  • First product development centre in Germany

ISKO has opened its second product development centre, based in Stade, Lower Saxony, following the success of the Creative Room London in the UK which had its opening earlier this year.

Creative Room Germany is a innovative space and the first of its kind in Germany. It is the latest initiative of Creative Room Services (CRS), a division of ISKO devoted to offering streamlined and simplified solutions for all denim requirements – from fabric to finished garment.

With a focus on sustainable washing and finishing techniques, customers of Creative Room Germany will be able to work in parallel with ISKO’s experts to achieve their desired denim looks. Together with machine technology partner Jeanologia, they have been able to develop innovative washing and finishing techniques that meet the highest quality and sustainability standards with a significantly lower environmental impact. Creative Room Germany will also be the central point for its customers full product development, ensuring the whole process is agile and more efficient.

By utilising ISKO’s patented recycling technology, they are now able to develop brand new garments by using fibres from post-consumer denim, finally closing the loop and giving a new and cutting-edge circular supply solution for their customers. As well as a hub for its customers, Creative Room Germany will also act as a platform for the wider denim community to share knowledge, create new and innovative ideas and to bring them to life.

“Building on from the success of our London facility, our goal will be to offer tailor made garment supply solutions for customers in the DACH, Benelux and Nordic markets and this facility will be the focal point of that offering. With a collaborative approach, we will fulfil our vision of bringing a new circular supply solution to the market.”
Pau Bruguera, Executive Director @ ISKO

More information:
Isko denim finishing Creative Room
Source:

ISKO

(c) dullboiiiii
16.09.2022

Premium Group launches Charity Collection at The Ground event in Berlin

In cooperation with Platte Berlin, deadHYPE, Visionary Services and the Fashion Council Germany, The Ground invited to the Studio2Retail block party in Mitte. 950 guests, including creatives, influencers and the young Gen-Z Berlin fashion scene, came together for the first time since The Ground premiered in July to exchange and celebrate change.

The community had the exclusive opportunity to buy the limited pieces of the MUST-HAVE PEACE charity collection, which the Premium Group team initiated to support the people suffering from the war in Ukraine.

The collection includes 22 special items of clothing and accessories from 11 brands and designers from the Premium Group cosmos, of which 100% of the proceeds go to Be an Angel.

In cooperation with Platte Berlin, deadHYPE, Visionary Services and the Fashion Council Germany, The Ground invited to the Studio2Retail block party in Mitte. 950 guests, including creatives, influencers and the young Gen-Z Berlin fashion scene, came together for the first time since The Ground premiered in July to exchange and celebrate change.

The community had the exclusive opportunity to buy the limited pieces of the MUST-HAVE PEACE charity collection, which the Premium Group team initiated to support the people suffering from the war in Ukraine.

The collection includes 22 special items of clothing and accessories from 11 brands and designers from the Premium Group cosmos, of which 100% of the proceeds go to Be an Angel.

Be an Angel e.V. is an initiative of people from creative industries who are committed to the sustainable integration of people with a refugee background. Under the direction of Chairman Andreas Tölke, the team has been working intensively for the people from Ukraine for weeks, organising trips to Germany for refugees from Moldova, activating a nationwide network for accommodation and supplying hospitals in Odessa, Kyiv and Lemberg with medicine.

Source:

PREMIUM Exhibitions GmbH

adidas Breast Cancer Awareness Collection - Free Hiker
16.09.2022

adidas launches Breast Cancer Awareness Collection

A Selection of Footwear and Apparel Designed to Raise Awareness and Funding for Breast Cancer Now and National Breast Cancer Foundation, Inc.

A Selection of Footwear and Apparel Designed to Raise Awareness and Funding for Breast Cancer Now and National Breast Cancer Foundation, Inc.

  • In partnership with the charities Breast Cancer Now (UK/Europe) and National Breast Cancer Foundation (US), the Collection brings together a range of products for running, hiking and mountain biking
  • £15/€15/$15 from each full-price sale will be donated to BCN (for purchases in the UK and EU) or NBCF (for purchases in the North America)
  • The Collection feature illustrations by adidas pro mountain biker Veronique Sandler, empathetically designed to represent the comfort that those with breast cancer have experienced in the outdoors

Inspired by the experiences of people and communities around the world, including its own employees and athletes, adidas is launching the Breast Cancer Awareness Collection this October.
Available throughout Breast Cancer Awareness Month, the adidas Breast Cancer Awareness Collection sees adidas partnering with Breast Cancer Now in the UK and Europe, and National Breast Cancer Foundation, Inc. in the US, to help raise awareness of breast cancer and support the vital work both charities do.

The products in the Breast Cancer Awareness Collection have been chosen to help everyone, regardless of physical ability or condition, spend more time in the outdoors.
The collection’s focus on functional footwear and apparel that is designed for the outdoors is in keeping with adidas' objective to help broaden access to outdoor sports and help everyone enjoy the benefits of spending time in nature. With United by Summits, adidas TERREX is taking this brand-wise ethos further by encouraging all people, from every background, to realise their own individual goals in the outdoors and enjoy the benefits of adventure, both big and small.

The collection is available for purchase in limited quantities from September 30, 2022 until the end of October 2022 for adiClub members only, and £15/€15/$15 from each full-price sale of the adidas Breast Cancer Awareness Collection will be donated to Breast Cancer Now (for purchases in the UK and EU) or National Breast Cancer Foundation, Inc. (for purchases in North America). The money raised will contribute to the important work these charities are doing.

More information:
adidas Charity breast cancer
Source:

adidas

15.09.2022

YesAnd & Kornit Digital: Customizable On-Demand Printing Collaboration with Fashinnovation

Sustainable fashion brands YesAnd & Kornit Digital are teaming up with the global platform fostering innovation in the fashion industry, Fashinnovation. This month, the three like-minded companies will be unveiling a direct-to-garment printing collaboration.
 
YesAnd & Kornit Digital are (e)co-creating digital, on-demand printed certified organic blank merchandise, with graphic designs by artists, celebrities, influencers, musicians, fashion VIPs, NGO’s and more. Sharing core values of fashion & innovation & non-toxic, zero-waste production, and the fusion of technology to accelerate impact, this launch represents a cutting-edge and sustainable solution that’s accessible, traceable, customizable, and scalable. By joining forces, this collaboration will educate, engage, and activate both consumers and industry alike.
 

Sustainable fashion brands YesAnd & Kornit Digital are teaming up with the global platform fostering innovation in the fashion industry, Fashinnovation. This month, the three like-minded companies will be unveiling a direct-to-garment printing collaboration.
 
YesAnd & Kornit Digital are (e)co-creating digital, on-demand printed certified organic blank merchandise, with graphic designs by artists, celebrities, influencers, musicians, fashion VIPs, NGO’s and more. Sharing core values of fashion & innovation & non-toxic, zero-waste production, and the fusion of technology to accelerate impact, this launch represents a cutting-edge and sustainable solution that’s accessible, traceable, customizable, and scalable. By joining forces, this collaboration will educate, engage, and activate both consumers and industry alike.
 
"We at Fashinnovation have a strong belief that the fashion industry must walk side-by-side with innovation, in order to ensure a sustainable future. We are thrilled for this collaboration with YesAnd and Kornit, as we hope to set an example when it comes to the power of unity. In our minds, it's not about a person's wins, but rather it's about our collective progress," said Jordana & Marcelo Guimaraes, Founders of Fashinnovation.
 
Debuting the first of their brand collaborations with farm-to-print organic merchandise, this collaboration will together minimize waste, water, chemical use, and energy, while celebrating climate action, manufacturing efficiencies, and sustainable innovation—representing a true and timely fashion statement. The brands will be debuting their select blank styles of digitally-printed designs from the initial capsule collection—including the YesAnd Frida Hoodie, Gloria Hoodie Tee, Dominique Tee, and the Samata Dress, with a graphic option aligning the missions of YesAnd, Fashinnovation and Kornit Digital, “Don’t Wear Clothes, Wear Change.”

Source:

Kornit Digital

13.09.2022

Ionofibres a new track for smart and functional textiles

Electronically conductive fibres are already in use in smart textiles, but in a recently published research article, ionically conductive fibres have proven to be of increasing interest. The so-called ionofibres achieve higher flexibility and durability and match the type of conduction our body uses. In the future, they may be used for such items as textile batteries, textile displays, and textile muscles.

The research project is being carried out by doctoral student Claude Huniade at the University of Borås and is a track within a larger project, Weafing, the goal of which is to develop novel, unprecedented garments for haptic stimulation comprising flexible and wearable textile actuators and sensors.

In Claude Huniade’s project, the goal is to produce conductive yarns without conductive metals.
"My research is about producing electrically conductive textile fibres, and ultimately yarns, by coating non-metals sustainably on commercial yarns. The biggest challenge is in the balance between keeping the textile properties and adding the conductive feature," said Claude Huniade.

Electronically conductive fibres are already in use in smart textiles, but in a recently published research article, ionically conductive fibres have proven to be of increasing interest. The so-called ionofibres achieve higher flexibility and durability and match the type of conduction our body uses. In the future, they may be used for such items as textile batteries, textile displays, and textile muscles.

The research project is being carried out by doctoral student Claude Huniade at the University of Borås and is a track within a larger project, Weafing, the goal of which is to develop novel, unprecedented garments for haptic stimulation comprising flexible and wearable textile actuators and sensors.

In Claude Huniade’s project, the goal is to produce conductive yarns without conductive metals.
"My research is about producing electrically conductive textile fibres, and ultimately yarns, by coating non-metals sustainably on commercial yarns. The biggest challenge is in the balance between keeping the textile properties and adding the conductive feature," said Claude Huniade.

Currenty, the uniqueness of his research leans towards the strategies employed when coating. These strategies expand to the processes and the materials used.

Uses ionic liquid
One of the tracks he investigates is about a new kind of material as textile coating, ionic liquids in combination with commercial textile fibres. Just like salt water, they conduct electricity but without water. Ionic liquid is a more stable electrolyte than salt water as nothing evaporates.

"The processable aspect is an important requirement since textile manufacturing can be harsh on textile fibres, especially when upscaling their use. The fibres can also be manufactured into woven or knitted without damaging them mechanically while retaining their conductivity. Surprisingly, they were even smoother to process into fabrics than the commercial yarns they are made from," explained Claude Huniade.

Ionofibres could be used as sensors since ionic liquids are sensitive to their environment. For example, humidity change can be sensed by the ionofibers, but also any stretch or pressure they are subjected to.

"Ionofibres could truly shine when they are combined with other materials or devices that require electrolytes. Ionofibres enable certain phenomena currently limited to happen in liquids to be feasible in air in a lightweight fashion. The applications are multiple and unique, for example for textile batteries, textile displays or textile muscles," said Claude Huniade.

Needs further research
Yet more research is needed to combine the ionofibres with other functional fibres and to produce the unique textile devices.

How do they stand out compared to common electronically conductive fibres?
"In comparison to electronically conductive fibres, ionofibers are different in how they conduct electricity. They are less conductive, but they bring other properties that electronically conductive fibers often lack. Ionofibres achieve higher flexibility and durability and match the type of conduction that our body uses. They actually match better than electronically conductive fibres with how electricity is present in nature," he concluded.

Source:

University of Borås - The Swedish School of Textiles

(c) adidas AG
08.09.2022

adidas introduces FW22 Made with Nature Capsule Collection

adidas has unveiled the latest in its Made with Nature Capsule Collection with a new Ultraboost 22 Made with Nature and Made with Nature apparel joining the range as the brand continues its mission to call time on conventional materials and design out finite resources.

Designed in balance with the planet, the women’s Ultraboost 22 Made with Nature takes the forward-thinking elements of the Ultraboost 22 and amplifies them with natural materials. The shoe is made in part with natural materials – 40% of the knitted upper is made with lyocell, a material created with cellulosic fibers made from sustainably grown wood.

Launching alongside the Ultraboost 22 Made with Nature is a new Made with Nature apparel range, including a performance running wear look for men and women. The apparel range is made with at least 50% organic cotton.

adidas has unveiled the latest in its Made with Nature Capsule Collection with a new Ultraboost 22 Made with Nature and Made with Nature apparel joining the range as the brand continues its mission to call time on conventional materials and design out finite resources.

Designed in balance with the planet, the women’s Ultraboost 22 Made with Nature takes the forward-thinking elements of the Ultraboost 22 and amplifies them with natural materials. The shoe is made in part with natural materials – 40% of the knitted upper is made with lyocell, a material created with cellulosic fibers made from sustainably grown wood.

Launching alongside the Ultraboost 22 Made with Nature is a new Made with Nature apparel range, including a performance running wear look for men and women. The apparel range is made with at least 50% organic cotton.

Christopher Wheat, Global Category Director Running Footwear said: “At adidas, we understand that change is not only possible, it’s an urgent necessity. With Made with Nature, we are on a journey to a world beyond plastic. We’re calling time on conventional materials and methods of make. Once depleted, there’s no coming back for fossil resources. But when we design in synergy with natural processes, when we make with nature, we can use materials that regrow or regenerate – and change the way products are made."

Foto: IFCO
07.09.2022

ISTANBUL FASHION CONNECTION, August 2022 - Final Report

15,493 visitors from 107 countries attended the second Istanbul Fashion Connection. Over 300 companies showed their collections on more than 15,000 square meters of exhibition space and provided information about their creative collections and their production capacities in the areas of womenswear, menswear, kidswear, denim, shoes, leather and fur, lingerie and sportswear.

There was busy business activity, the ideal near shore capacities combined with the range of fashion collections experienced great demand. Istanbul Fashion Connection was a meeting point with the opportunity for a face-to-face meeting on a common platform. All trade channels were represented at the fair, from large shopping malls and department store groups to wholesalers, international retail chains, multi-brand boutiques and online platforms.

15,493 visitors from 107 countries attended the second Istanbul Fashion Connection. Over 300 companies showed their collections on more than 15,000 square meters of exhibition space and provided information about their creative collections and their production capacities in the areas of womenswear, menswear, kidswear, denim, shoes, leather and fur, lingerie and sportswear.

There was busy business activity, the ideal near shore capacities combined with the range of fashion collections experienced great demand. Istanbul Fashion Connection was a meeting point with the opportunity for a face-to-face meeting on a common platform. All trade channels were represented at the fair, from large shopping malls and department store groups to wholesalers, international retail chains, multi-brand boutiques and online platforms.

The global turkish exports in the first half of this year amounted to US$ 12.4 billion, which corresponds to an annual growth of 11.6%. In the EU alone, the total for this period is US$7.7 billion, a growth of 14.7%. Mustafa Gültepe, President of the Turkish Exporters Assembly and IHKIB, announced that ready-to-wear exports are to be increased to $40 billion in the medium term.

The organizers are expecting over 600 companies to attend next IFCO. The exhibitors for the sourcing area will take part in a separate hall. Leading companies have already registered with the association for this. Lingerie and bridal/evening wear will also be shown in their own hall, which seasonally only presents itself once a year in Turkey.
The participation of international fashion companies is encouraged, for which IFCO provides the springboard into the Eastern European market.

Source:

JANDALI

(c) Freudenberg Performance Materials Holding SE & Co. KG
06.09.2022

Freudenberg establishes Apparel Technical Solution Center in Asia

Freudenberg Performance Materials Apparel (Freudenberg) is pleased to announce the establishment of the Apparel Technical Solution Center – Asia at its Nantong factory in China to expand the company’s innovation capabilities. With floor space of 900 m2, the new center offers technical expertise and innovations to apparel customers from nearly all apparel segments in Asia and around the world.

New capabilities with the Apparel Technical Solution Center – Asia
Committed to bringing enhanced technical support and services tailored to customers’ needs, the dedicated Apparel Technical Solution Center – Asia (ATSC) is equipped with cutting-edge technology. This includes a wide variety of fusing and bonding machines, laser and ultrasonic cutters, specialized sewing machines for sportswear applications, fiber filling machines for insulation applications, and washing and dry-cleaning machines that meet GB and AATCC standards.

Freudenberg Performance Materials Apparel (Freudenberg) is pleased to announce the establishment of the Apparel Technical Solution Center – Asia at its Nantong factory in China to expand the company’s innovation capabilities. With floor space of 900 m2, the new center offers technical expertise and innovations to apparel customers from nearly all apparel segments in Asia and around the world.

New capabilities with the Apparel Technical Solution Center – Asia
Committed to bringing enhanced technical support and services tailored to customers’ needs, the dedicated Apparel Technical Solution Center – Asia (ATSC) is equipped with cutting-edge technology. This includes a wide variety of fusing and bonding machines, laser and ultrasonic cutters, specialized sewing machines for sportswear applications, fiber filling machines for insulation applications, and washing and dry-cleaning machines that meet GB and AATCC standards.

The ATSC offers technical know-how to help customers design complex apparel solutions. In particular, it furthers Freudenberg’s dedication to joint innovations with sportswear customers and to finding technical solutions for performance applications.

Further innovation at the Nantong factory
The factory was moved to the Nantong Economic and Technological Development Area to meet increased production demand with state-of-the-art technological capabilities. Covering an area of nearly 50,000 m2 with cotton interlining, bi-elastic fusible interlining, and preformed materials production lines, the new site went into operation in 2021.

Dedicated to continuously improving production quality, the new factory also includes an innovative online defect detection system. This system enables defect information to be captured in real time and sent to operators for immediate adjustments, increasing the rate of bi-elastic interlinings and shirt interlinings. Furthermore, the online weft density automatic adjustment system helps improve the stability of the drying process and the quality of semi-finished products.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

(c) munich fabric start
02.09.2022

Abschlussbericht zur 50. MUNICH FABRIC START: Hauptthema war der Preis

Die internationale Fabric Trade Show bleibt ein gesetzter Termin im Messekalender. Die positive, motivierte und ambitionierte Aufbruchsstimmung der Messe mit inspirierenden Neuheiten, innovativen Inhalten und zukunftsgerichteten Themen hat sich auch auf die Branche übertragen: Neben intensiven Gesprächen insbesondere über Rohstoff-und Energiepreise, zeigten Einkäufer:innen, Produktmanager:innen und Designer:innen in München mehr denn je Lust auf Neues.

Die internationale Fabric Trade Show bleibt ein gesetzter Termin im Messekalender. Die positive, motivierte und ambitionierte Aufbruchsstimmung der Messe mit inspirierenden Neuheiten, innovativen Inhalten und zukunftsgerichteten Themen hat sich auch auf die Branche übertragen: Neben intensiven Gesprächen insbesondere über Rohstoff-und Energiepreise, zeigten Einkäufer:innen, Produktmanager:innen und Designer:innen in München mehr denn je Lust auf Neues.

Die MUNICH FABRIC START sieht sich mit der 50. Ausgabe vom 30. August bis zum 1. September in ihrer Rolle als eine der wichtigsten europäischen Stoffmessen und führenden Business-Plattformen für die Fashion und Denim-Branche bekräftigt. Der Münchner Veranstalter feierte mit dem Jubiläum nicht nur das Comeback von MUNICH FABRIC START und der internationalen Denim Trade Show BLUEZONE nach den Corona-bedingt angepassten Formaten der vergangenen Saisons, sondern auch ihr Wachstum mit der größten Veranstaltung seit Bestehen. Insgesamt zeigten rund 900 Aussteller:innen aus 40 Ländern ca. 1.500 Kollektionen auf einer Gesamtausstellungsfläche von 45.000 Quadratmetern - rund 2.500 Quadratmetern mehr als im Vergleich zur letzten Vor-Corona-Ausgabe im September 2019.

Die Messe registrierte im Vergleich zu Vor- Corona-Zeiten mit 14.200 Besucher:innen rückläufige Zahlen, hatte dies aber angesichts der nach wie vor und insbesondere transkontinental anhaltenden Reiseeinschränkungen und -vorbehalten ebenso wie der zu beobachtenden Strukturveränderungen in der Modebranche erwartet. Die Qualität der vor Ort anwesenden Einkäufer:innen, Designer:innen und Produktmana¬ger:innen überzeugte, was die Aussteller:innen bestätigten.

Nach München kamen vor allem Unternehmen aus Deutschland, Österreich und der Schweiz, darunter Firmen wie Adidas, ArmedAngels, Baldessarini, BMW, C&A, Cinque, Comma, Drykorn, Ecoalf, Hallhuber, die Holy Fashion Group, Hugo Boss, Lagerfeld, Laurèl, Mac, Marc Cain, Marc O’Polo, Nike, Peek & Cloppenburg, Riani, s.Oliver, Schumacher, Strellson, Vaude, Windsor oder Zalando. Eine wichtige Besucher:innengruppe blieben die Niederlande mit Firmen wie Calvin Klein, Claudia Sträter, Expresso Fashion oder Scotch & Soda. Ebenfalls stark mit ihren Teams vertreten waren der skandinavische Raum mit Besucher:innen wie Selected / Homme und die Bestseller-Gruppe genauso wie Brands aus Frankreich und Italien, darunter Calzedonia, Diesel, Giorgio Armani und Lacoste.

Sowohl auf der MUNICH FABRIC START im MOC als auch in der BLUEZONE wurde das Show-Konzept weiter ausgebaut: In den DESIGN STUDIOS kamen 60 international führende Stoffdesigner:innen, Print- und Musterentwickler:innen zusammen; KEYHOUSE und CATALYSER versammelten technologische, nachhaltige und ästhetische Innovationstreiber an den Schnittstellen von Fashion und Denim; das neue Format THE SOURCE war mit rund 65 Aussteller:innen bei seiner Premiere ausgebucht und lieferte in der neu erschlossenen Halle 8 direkt gegenüber vom MOC Antworten auf die steigende Nachfrage nach Manufacturing und Nearshoring.

Bei fast jedem Messegespräch ging es im preissensibelsten, europäischen Markt Deutschland darum, Ansätze zu finden, wie einerseits Eckpreislagen gehalten, andererseits nicht auf Qualität verzichtet werden muss – zu Zeiten steigender Energiepreise ein Balanceakt.

Source:

MUNICHFABRICSTART Exhibitions GmbH

31.08.2022

50. MUNICH FABRIC START mit "Furore" gestartet

Far Furore: Die 50. Ausgabe der MUNICH FABRIC START ist am 30. August erfolgreich gestartet - innovativ und nach vorne gerichtet. Mit rund 900 Aussteller:innen aus 40 Ländern und 1.500 Kollektionen auf einer Gesamtausstellungsfläche von 45.000 Quadratmetern sind die Messen MUNICH FABRIC START mit vier Hallen im MOC, BLUEZONE mit zwei Hallen, das KEYHOUSE sowie das neue Format THE SOURCE mit rund 2.500 Quadratmetern zusätzlicher Fläche nochmals gewachsen und erreichen Aussteller:innen-seitig das Niveau der letzten Vor-Corona-Ausgabe im September 2019.
 
THE SOURCE als Antwort auf die steigende Nachfrage nach Manufacturing und Nearshoring ist mit 65 Aussteller:innen in der neu erschlossenen Halle 8 direkt gegenüber vom MOC ebenfalls ausgebucht.
 
Das hohe Besucheraufkommen am ersten Messetag ist ein Zeichen dafür, dass die MUNICH FABRIC START mit ihrem Termin vom 30. August bis 1. September richtig liegt und bekräftigt das Standing der Münchener Veranstaltung als eine der wichtigsten europäischen Stoffmessen und Trendautorität. FURORE, das aktuelle Leitthema der MUNICH FABRIC START, hat sich bewahrheitet.

Far Furore: Die 50. Ausgabe der MUNICH FABRIC START ist am 30. August erfolgreich gestartet - innovativ und nach vorne gerichtet. Mit rund 900 Aussteller:innen aus 40 Ländern und 1.500 Kollektionen auf einer Gesamtausstellungsfläche von 45.000 Quadratmetern sind die Messen MUNICH FABRIC START mit vier Hallen im MOC, BLUEZONE mit zwei Hallen, das KEYHOUSE sowie das neue Format THE SOURCE mit rund 2.500 Quadratmetern zusätzlicher Fläche nochmals gewachsen und erreichen Aussteller:innen-seitig das Niveau der letzten Vor-Corona-Ausgabe im September 2019.
 
THE SOURCE als Antwort auf die steigende Nachfrage nach Manufacturing und Nearshoring ist mit 65 Aussteller:innen in der neu erschlossenen Halle 8 direkt gegenüber vom MOC ebenfalls ausgebucht.
 
Das hohe Besucheraufkommen am ersten Messetag ist ein Zeichen dafür, dass die MUNICH FABRIC START mit ihrem Termin vom 30. August bis 1. September richtig liegt und bekräftigt das Standing der Münchener Veranstaltung als eine der wichtigsten europäischen Stoffmessen und Trendautorität. FURORE, das aktuelle Leitthema der MUNICH FABRIC START, hat sich bewahrheitet.

More information:
MUNICH FABRIC START
Source:

Munich Fabric Start

(c) Allmann Sattler Wappner Architekten, München; Menges Scheffler Architekten, Frankfurt; Jan Knippers Ingenieure, Stuttgart
31.08.2022

Neues Ausbildungsjahr für Textil- und Bekleidungsberufe startet

Ein Garn zu spinnen, ein Gewebe oder Gestrick zu produzieren, anschließend zu veredeln und zu einem fertigen Textil mit breiten Anwendungsfeldern zu konfektionieren, benötigt viel Know-how. Passend dazu bieten Textil- und Bekleidungsunternehmen Ausbildungsberufe an, deren Anwendungsfelder ganz nach dem Motto „Textil kann viel“ nicht vielfältiger sein könnten. Produktionsmechaniker*innen Textil können ihr Geschick im Umgang mit Maschinen unter Beweis stellen; Produktveredler*innen Textil sind direkt in das Veredeln und Färben eingebunden; Textil- und Modeschneider*innen verwandeln Stoffe in Kleidungsstücke und andere Produkte. Auch Ausbildungen im kaufmännischen Bereich, in Logistik oder IT hat die Industrie zu bieten.

Ein Garn zu spinnen, ein Gewebe oder Gestrick zu produzieren, anschließend zu veredeln und zu einem fertigen Textil mit breiten Anwendungsfeldern zu konfektionieren, benötigt viel Know-how. Passend dazu bieten Textil- und Bekleidungsunternehmen Ausbildungsberufe an, deren Anwendungsfelder ganz nach dem Motto „Textil kann viel“ nicht vielfältiger sein könnten. Produktionsmechaniker*innen Textil können ihr Geschick im Umgang mit Maschinen unter Beweis stellen; Produktveredler*innen Textil sind direkt in das Veredeln und Färben eingebunden; Textil- und Modeschneider*innen verwandeln Stoffe in Kleidungsstücke und andere Produkte. Auch Ausbildungen im kaufmännischen Bereich, in Logistik oder IT hat die Industrie zu bieten.

„Wir möchten noch mehr junge Menschen für eine Ausbildung in unserer spannenden und innovativen Branche begeistern. Deshalb investiert Südwesttextil mit dem Bau des Texoversums auf dem Campus der Hochschule Reutlingen in die Zukunft der Ausbildung. Das Texoversum ist einer der Orte, an dem die textile Aus- und Weiterbildung ihre Innovation und Attraktivität aufzeigt und vorantreibt“, so Edina Brenner, Hauptgeschäftsführerin des Wirtschafts- und Arbeitgeberver-bands Südwesttextil.

In den Nachwuchs zu investieren hat beim Verband der Südwestdeutschen Textil- und Bekleidungsindustrie e.V. Südwesttextil Tradition: Seit 1980 sind in der Gatex, der überbetrieblichen Aus- und Weiterbildungsstätte der Branche, mehr als 1.000 Menschen erfolgreich qualifiziert worden. Auszubildenden ermöglicht die Gatex das Lernen entlang der textilen Kette, sodass sie im Anschluss im Betrieb auch vor- oder nachgelagerte Stufen der Produktion mitdenken können.
 
Mit dem Umzug der Gatex von Bad Säckingen nach Reutlingen setzt Südwesttextil auf einen zentralen Ort und die Verknüpfung mit dem Studienangebot der Hochschule. Schon jetzt schnuppern die Auszubildenden Campusluft, denn das überbetriebliche Ausbildungsjahr beginnt direkt in Reutlingen. Das Texoversum wird im Frühsommer des nächsten Jahres eröffnet und bietet dem textilen Nachwuchs Raum fürs Lernen, Ausprobieren und Vernetzen. Denn in den 3.000 Quadratmetern des innovativ gebauten Gebäudes befinden sich neben Schulungsräumen auch Werkstätten, Labore und Think-Tank-Flächen.

17.08.2022

Far Furore – Furore machen: Leitthema der MUNICH FABRIC START

Aufsehen erregen. Einen außergewöhnlichen Zustand der Begeisterung erzeugen. Rasend vor Wut und gleichzeitig voller Verzückung. All diese Widersprüche beinhaltet das Wort „Furore“ – und damit das aktuelle Leitthema der 50. MUNICH FABRIC START. Die Farb- und Materialtrends für Herbst/Winter 23/24 spiegeln dies in einer Kontroverse wider – von ruhig, dezent und natürlich bis hoch-innovativ, impulsiv und provokativ; von nahezu unsichtbar bis maximal plakativ.

Mit knapp 900 Aussteller:innen und 1.500 Kollektionen auf einer Gesamtausstellungsfläche von rund 45.000 Quadratmetern umfasst die MUNICH FABRIC START inzwischen acht Bereiche: Fabrics und Additionals mit internationalen Materialinnovationen für alle Bekleidungssegmente, ReSOURCE und Sustainable Innovations für nachhaltige Innovationen, Design Studios mit Stoffdesigns und neuen Entwicklungen für Prints auf vergrößerter Fläche, den Innovationshub KEYHOUSE, das Denim Powerhouse BLUEZONE und das neue Sourcing-Areal THE SOURCE für internationale, vertikale Integration.

Aufsehen erregen. Einen außergewöhnlichen Zustand der Begeisterung erzeugen. Rasend vor Wut und gleichzeitig voller Verzückung. All diese Widersprüche beinhaltet das Wort „Furore“ – und damit das aktuelle Leitthema der 50. MUNICH FABRIC START. Die Farb- und Materialtrends für Herbst/Winter 23/24 spiegeln dies in einer Kontroverse wider – von ruhig, dezent und natürlich bis hoch-innovativ, impulsiv und provokativ; von nahezu unsichtbar bis maximal plakativ.

Mit knapp 900 Aussteller:innen und 1.500 Kollektionen auf einer Gesamtausstellungsfläche von rund 45.000 Quadratmetern umfasst die MUNICH FABRIC START inzwischen acht Bereiche: Fabrics und Additionals mit internationalen Materialinnovationen für alle Bekleidungssegmente, ReSOURCE und Sustainable Innovations für nachhaltige Innovationen, Design Studios mit Stoffdesigns und neuen Entwicklungen für Prints auf vergrößerter Fläche, den Innovationshub KEYHOUSE, das Denim Powerhouse BLUEZONE und das neue Sourcing-Areal THE SOURCE für internationale, vertikale Integration.

Seit Wochen ausgebucht, ist THE SOURCE die neue europäische One Stop Solution für ein ganzheitliches Fashion Sourcing und neu gedachte Wertschöpfungsketten. 65 ausgewählte internationale Fertigungsunternehmen präsentieren ihre Angebote von Cut-Make-Trim (CMT) bis hin zur High End Production. Durch ein Cluster der wichtigsten Beschaffungsländer wie Portugal, Türkei, Marokko, Tunesien, Bosnien und Vietnam entsteht ein businessrelevanter Mix für die Risikodiversifikation, genre- und preislagenunabhängig. Die MUNICH FABRIC START hat dafür die neue Halle 8 mit rund 2.500 Quadratmetern zusätzlicher Fläche entwickelt. Die unter Denkmalschutz stehende, jüngst fertigrestaurierte, direkt an das bisherige MUNICH FABRIC START Gelände angrenzenden Lokhalle ist dafür die perfekte Location - mit gigantischen Ausmaßen und spektakulärer Architektur eine der größten, freitragenden historischen Stahltragwerkhallen Europas.

ReSOURCE, die Sourcing Plattform für nachhaltige Materialentwicklungen, bietet bio-zertifizierte, biobasierte, recycelte, kreislauffähige oder aus regenerativen Quellen hergestellte Stoffe und Zutaten und gewinnt weiterhin an Bedeutung.

Für die DESIGN STUDIOS wurde im Atrium 3 des MOC ein neues Areal geschaffen. Mit rund 40 Studios hat sich die Ausstellerzahl verdoppelt. Neben bekannten Namen wie buntastic, Eleonora Clerici, Fusion CPH, Le Studio Copenhagen, LETI., Musticstsyle oder Zisser Textile Design, die bereits langjährig in München präsentieren, ist dieses Jahr erstmalig das CREATE-Kollektiv in München vertreten, dessen 27 kreative Studios das Print-Segment der MUNICH FABRIC START bereichern.

Source:

munich fabric start

15.08.2022

THE ITALIAN LUSTER at Munich Fabric Start

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

Munich Fabric Start presents a new project-area that will take place during the next edition.
BLUEZONE with CATALYZER and KEYHOUSE will be the place to be for the blue community on 30 and 31 August. As a global key event for the denim industry, 90 international denim mills, weavers, manufacturers and suppliers will show their latest innovations and trends in the Zenithhalle, the Kohlebunker and the Kesselhaus.

"THE ITALIAN LUSTER" will offer all visitors a deep dive into the Made in Italy supply chain with companies that have turbocharged growth by focusing on quality, innovation and research. Well-known and international companies that can make an important contribution to European and global brands.

From the production of trimmings and accessories, to the creation of unique fabrics, to the inspiration of new collections and their realization to the finishing of the garments, Made in Italy still represents the reality par excellence focused on ethical and sustainable production.

"THE ITALIAN LUSTER" will allow all visitors an incredible journey into the Italian supply chain that has the ability to meet any demand of brands, from small to large production needs.

On the top floor of the Catalyzer Hall, it will be possible to view the individual collections of the companies in attendance and receive a beautiful gift specially created by the CADICA GROUP company from Carpi.

 
Participants
ACM - TRIMS AND ACCESSORIES PRODUCER
ACM was founded in 1982.
Since 1982, ACM has been providing the fashion world with unique, sought-after and customized details, guaranteeing prestigious and innovative workmanship. Each and every product is the result of the care we take at every stage of our production process: from the prototype, designed by putting the consumer's health first, to production with state-of-the-art machinery, which allows for fine workmanship and cutting-edge customization, while minimizing the impact on the environment (we are GRS certified) and complying with the strictest eco-toxicological regulations.

FASHION ART - LUXURY FASHION DESIGN
Fashionart is the brainchild of Andrea Rambaldi, who, after learning his trade from his parents, his mother a seamstress and his father the owner of a dye shop, decided to pursue a freelance career.
He began by collaborating with companies in the textile sector, where he deepened his knowledge in the field of chemistry and industrial processes, touching on the problems of processing cycles.
The real turning point came as a result of an important job for the Maison Chanel, which recognized the originality and effectiveness of his technical proposals. From that moment, this is 2008, FashionArt was born, a company focused on luxury fashion and design, expert in the design and production of garments.
From the idea to the final product, the company is able to support the client throughout the entire production process.
Since then, the company has grown and developed exponentially thanks to a team of managers, artists and experts whose experience makes them a benchmark in the high fashion industry. Fashionart operates exclusively in high fashion, a very difficult field in which to combine experience and technique with art and creativity, where our potential can be expressed to the fullest.

ELLETI - GARMENTS AND WASHING MAKER
Advocate of an approach that combines tradition, creativity, and innovation, for over 30 years Elleti Group has defined standards of absolute excellence for the denim industry. Born in the 80s in San Bonifacio, near Verona, the company developed in a one-of-a-kind context, a hotbed of ideas that led to the defining and establishing of new professions and skills in the field of denim treatment and garment personalization. Led by Luigi Lovato, right from the start the company established itself on the denim scene thanks to an ambitious and pioneering investment in new solutions. The following ten years mark an important growth which leads to the internationalization both of brand and production. After the implementing of a new department for garment dyeing, Elleti Group was ready to welcome the ever-increasing international demand, equipping itself with the first laundry in Tunisia, a country logistically central in the Mediterranean area, and as a result, ideal for the development of a complete textile supply chain. This successful story continues to unfold in the 2000s, a decade that marks the opening to the market of garment making thanks to two new structures in Romania, and peaks with the acquisition of Martelli Lavorazioni Tessili. Today Elleti Group stands firm in the market as a result of a complete offer that preserves the company’s artisanal vocation enriched through a constant process of responsible innovation.

In addition, companies BERTO INDUSTRIA TESSILE and OLIMPIAS GROUP will participate in the project by presenting their collections within their booths in the Catalyzer hall.

Source:

EFFE-BI SRL PR & COMMUNICATION

(c) adidas AG
12.08.2022

adidas Originals introduces the NMD V3 Silhouette

In 2015, adidas Originals launched the NMD silhouette – taking cues from the brand’s inimitable archive in order to create a shoe that disrupted the sneaker world at the time. Six years later and the Trefoil has returned with an updated take on the original innovator, channeling the very same independent mindset to present the  NMD V3.

Built for a life in motion, the NMD V3 reimagines its own iconic heritage with a distinctly forward thinking vision. The silhouette features a re-engineered mesh that wraps around the foot, a transparent heel clip, and BOOST cushioning that’s partially encapsulated in a TPU shell. The NMD V3 also comprises an upper made with a high-performance yarn which contains at least 50% Parley Ocean Plastic – re-imagined plastic waste, intercepted on remote islands, beaches, coastal communities and shorelines – and 50% recycled polyester.

In 2015, adidas Originals launched the NMD silhouette – taking cues from the brand’s inimitable archive in order to create a shoe that disrupted the sneaker world at the time. Six years later and the Trefoil has returned with an updated take on the original innovator, channeling the very same independent mindset to present the  NMD V3.

Built for a life in motion, the NMD V3 reimagines its own iconic heritage with a distinctly forward thinking vision. The silhouette features a re-engineered mesh that wraps around the foot, a transparent heel clip, and BOOST cushioning that’s partially encapsulated in a TPU shell. The NMD V3 also comprises an upper made with a high-performance yarn which contains at least 50% Parley Ocean Plastic – re-imagined plastic waste, intercepted on remote islands, beaches, coastal communities and shorelines – and 50% recycled polyester.

More information:
adidas Originals adidas shoes
Source:

adidas AG

Foto: Unplash
10.08.2022

High-tech center for cotton processing and fiber-to-fiber recycling being built in Africa

IFFAC (Impact Fund for African Creatives) has revealed plans which will revolutionise West African textile and garment production at one stroke. The fund is converting a partially disused textile mill in the region into a hi-tech centre for processing local cotton and recycling waste fabric, to produce both fabric for further processing and new clothes. The mill will be equipped with modern equipment, all sustainably powered by hydroelectricity from the nearby Volta Dam.

West Africa grows about 6% of the world’s cotton but only a tiny fraction of that crop is processed on the continent, the vast majority being shipped thousands of miles to Asia before being shipped back again as finished or part-finished fabrics. The mill project will end the continent’s reliance on such an unsustainable practice with all the obvious financial and environmental benefits.

IFFAC (Impact Fund for African Creatives) has revealed plans which will revolutionise West African textile and garment production at one stroke. The fund is converting a partially disused textile mill in the region into a hi-tech centre for processing local cotton and recycling waste fabric, to produce both fabric for further processing and new clothes. The mill will be equipped with modern equipment, all sustainably powered by hydroelectricity from the nearby Volta Dam.

West Africa grows about 6% of the world’s cotton but only a tiny fraction of that crop is processed on the continent, the vast majority being shipped thousands of miles to Asia before being shipped back again as finished or part-finished fabrics. The mill project will end the continent’s reliance on such an unsustainable practice with all the obvious financial and environmental benefits.

As well as producing fabric from sustainably grown virgin cotton, a joint venture with Shandong-based WOL Textiles Ltd., a privately owned plant that has long supplied the African market, the mill will be home to a state-of-the-art shredding and recycling facility, a joint venture between IFFAC and the Dutch Circularity B.V. CEO Han Hamers of Circularity B.V. in The Netherlands, has been involved in the production of 100% circular knit and woven articles.

The mill project is expected to create over a thousand jobs. The surrounding area already boasts a significant number of experienced textile workers ready to be retrained on the new equipment. While the majority of the products created will be sold within the region, all processes will confirm to new EU Supply Chain Law to allow for the possibility of export.  

Output is forecast at six million pieces of finished clothing and twenty-five million metres of spun and woven cloth per year. In total, thirty million US$ of investment will be made in the site with operations ready to begin next year (2023).

More information:
IFFAC Africa Recycling
Source:

Circularity Germany GmbH i.G.

10.08.2022

‘MADE IN BANGLADESH WEEK’: 12th -18th November 2022, Dhaka

  • Made in Bangladesh Week is organized by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE)
  • A week-long event in November will showcase sustainability strides being made by Bangladesh garment makers
  • The event will host 17 physical events like - conferences, expositions, photo exhibitions, fashion runway shows, sustainable design and innovation awards, factory tours –and many more.

The Honourable Prime Minister of Bangladesh, Sheikh Hasina, will inaugurate the first ever Made in Bangladesh Week in November. The event represents a major branding exercise for Bangladesh’s burgeoning garment manufacturing industry as it looks to position itself as the first-choice apparel sourcing hub for global fashion retailers.

It is the first branding event of the Bangladesh Apparel Industry dedicated solely to celebrating and showcasing the newest innovations, compliance, and sustainable developments of the RMG sector in the global market.

  • Made in Bangladesh Week is organized by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE)
  • A week-long event in November will showcase sustainability strides being made by Bangladesh garment makers
  • The event will host 17 physical events like - conferences, expositions, photo exhibitions, fashion runway shows, sustainable design and innovation awards, factory tours –and many more.

The Honourable Prime Minister of Bangladesh, Sheikh Hasina, will inaugurate the first ever Made in Bangladesh Week in November. The event represents a major branding exercise for Bangladesh’s burgeoning garment manufacturing industry as it looks to position itself as the first-choice apparel sourcing hub for global fashion retailers.

It is the first branding event of the Bangladesh Apparel Industry dedicated solely to celebrating and showcasing the newest innovations, compliance, and sustainable developments of the RMG sector in the global market.

The event aims to promote the apparel industry of Bangladesh locally and globally by showcasing the compelling stories of the ready-made garments sector, especially its impressive strides in the areas of workplace safety, environmental sustainability and workers’ wellbeing.

The event is expected to draw a gathering of more than a thousand people from home and abroad, including key stakeholders in the local and global fashion industry.

Bangladesh’s garment manufacturing industry has undergone a renaissance in recent times. Significant strides have been made in technological innovation, eco-friendly production, worker welfare and factory safety.

In addition to panels, seminars, awards, fashion shows and exhibitions, the week will also provide an opportunity for factory tours to give journalists and other stakeholders a chance to see for themselves innovative garment production in Bangladesh.

Made in Bangladesh Week will be organised by the Bangladesh Garment Manufacturers and Exporters Association (BGMEA) in partnership with Bangladesh Apparel Exchange (BAE).

More information:
Bangladesh
Source:

Bangladesh Apparel Exchange (BAE)

10.08.2022

Launch of international in-store collection program at Mustang

Today’s system of «take – make – waste» needs to change. New textiles are produced used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID continues to expand its offering for in-store collection programs throughout Europe and the USA.

TEXAID is partnering with Mustang to offer an in-store collection program. At scale and paired with TEXAID, in-store collection of used clothing enables conservation of resources because it allows items to be directly sorted for their next and most environmentally friendly lifecycle. This service can now be found in over 70 Mustang stores across Germany, Austria, Belgium, Switzerland, Czech Republic, France, Hungary, the Netherlands, and Poland.

Today’s system of «take – make – waste» needs to change. New textiles are produced used and discarded instead of putting them to a second use. The production of new textiles requires natural resources that are limited, and the current system has a significant negative impact on our planet. The transition to a circular system, where garments are kept in use for longer, is an opportunity to harness untapped potential around customer loyalty, economic growth, and ecological sustainability.

To move away from the linear system and enable products to be made out of post-consumer textile waste, TEXAID continues to expand its offering for in-store collection programs throughout Europe and the USA.

TEXAID is partnering with Mustang to offer an in-store collection program. At scale and paired with TEXAID, in-store collection of used clothing enables conservation of resources because it allows items to be directly sorted for their next and most environmentally friendly lifecycle. This service can now be found in over 70 Mustang stores across Germany, Austria, Belgium, Switzerland, Czech Republic, France, Hungary, the Netherlands, and Poland.

More information:
Texaid Mustang circularity
Source:

TEXAID

04.08.2022

adidas with strong growth in Western markets in Q2

  • Currency-neutral sales up 4%, despite more than € 300 million negative impact from macroeconomic constraints
  • Markets representing more than 85% of the business grow 14% overall
  • Gross margin down 1.5pp to 50.3% reflecting significantly higher supply chain costs
  • Operating profit reaches € 392 million
  • Net income from continuing operations amounts to € 360 million
  • FY 2022 outlook reflects double-digit growth during the second half of the year

“Our Western markets continued to show strong momentum in the second quarter amid heightened macroeconomic uncertainty. With Asia-Pacific returning to growth, markets combined representing more than 85% of our business grew at a double-digit rate,” said adidas CEO Kasper Rorsted. “With sports back at center stage this summer, revenues in our strategic growth categories Football, Running and Outdoor all increased by double digits. However, the macroeconomic environment, particularly in China, remains challenging. The recovery in this market is – due to continued covid-19-related restrictions – slower than expected.

  • Currency-neutral sales up 4%, despite more than € 300 million negative impact from macroeconomic constraints
  • Markets representing more than 85% of the business grow 14% overall
  • Gross margin down 1.5pp to 50.3% reflecting significantly higher supply chain costs
  • Operating profit reaches € 392 million
  • Net income from continuing operations amounts to € 360 million
  • FY 2022 outlook reflects double-digit growth during the second half of the year

“Our Western markets continued to show strong momentum in the second quarter amid heightened macroeconomic uncertainty. With Asia-Pacific returning to growth, markets combined representing more than 85% of our business grew at a double-digit rate,” said adidas CEO Kasper Rorsted. “With sports back at center stage this summer, revenues in our strategic growth categories Football, Running and Outdoor all increased by double digits. However, the macroeconomic environment, particularly in China, remains challenging. The recovery in this market is – due to continued covid-19-related restrictions – slower than expected. And we have to take into account a potential slowdown in consumer spending in all other markets for the remainder of the year.”

Currency-neutral revenues increase 4% despite macroeconomic constraints
In the second quarter, currency-neutral revenues increased 4% as adidas continued to see strong momentum in Western markets. This growth was achieved despite continued challenges on both supply and demand. Supply chain constraints as a result of last year’s lockdowns in Vietnam reduced top-line growth by around € 200 million in Q2 2022. In addition, the company’s decision to suspend its operations in Russia reduced revenues by more than € 100 million during the quarter. Continued covid-19-related lockdowns in Greater China also weighed on the top-line development in Q2. From a channel perspective, the top-line increase was to a similar extent driven by the company’s own direct-to-consumer (DTC) activities as well as increases in wholesale. Within DTC, e-commerce, which now represents more than 20% of the company’s total business, showed double-digit growth reflecting strong product sell-through. From a category perspective, revenue development was strongest in the company’s strategic growth categories Football, Running and Outdoor, which all grew at strong double-digit rates. In euro terms, revenues grew 10% to € 5.596 billion in the second quarter (2021: € 5.077 billion).

Strong demand in Western markets
Revenue growth in the second quarter was driven by Western markets despite last year’s lockdowns in Vietnam still reducing sales, particularly in EMEA and North America, by
€ 200 million in total. In addition, the top-line development in EMEA was also impacted by the loss of revenue in Russia/CIS of more than € 100 million. Nevertheless, currency-neutral sales grew 7% in the region. Revenues in North America increased 21% during the quarter driven by growth of more than 20% in both DTC and wholesale. Revenues in Latin America increased 37%, while Asia-Pacific returned to growth. Currency-neutral revenues increased 3% in this market despite still being impacted by limited tourism activity in the region. In contrast, the company continued to face a challenging market environment in Greater China, mainly related to the continued broad-based covid-19-related restrictions. As a result, currency-neutral revenues in the market declined 35% during the three-months period, in line with previous expectations. Excluding Greater China, currency-neutral revenues in the company’s other markets combined grew 14% in Q2.

Operating profit of € 392 million reflects operating margin of 7.0%
The company’s gross margin declined 1.5 percentage points to 50.3% (2021: 51.8%). Significantly higher supply chain costs and a less favorable market mix due to the significant sales decline in Greater China weighed on the gross margin development. This could only be partly offset by a higher share of full price sales, first price increases and the benefits from currency fluctuations. Other operating expenses were up 19% to € 2.501 billion (2021: € 2.107 billion). As a percentage of sales, other operating expenses increased 3.2 percentage points to 44.7% (2021: 41.5%). Marketing and point-of-sale expenses grew 8% to € 663 million (2021: € 616 million). The company continued to prioritize investments into the launch of new products such as adidas’ new Sportswear collection, the next iteration of its successful Supernova running franchise and first drops related to the Gucci collaboration as well as campaigns around major events like ‘Run for the Oceans.’ As a percentage of sales, marketing and point-of-sale expenses were down 0.3 percentage points to 11.8% (2021: 12.1%). Operating overhead expenses increased by 23% to a level of € 1.838 billion (2021:
€ 1.492 billion). This increase was driven by adidas’ continuous investments into DTC, its digital capabilities and the company’s logistics infrastructure as well as by unfavorable currency fluctuations. As a percentage of sales, operating overhead expenses increased 3.5 percentage points to 32.8% (2021: 29.4%). The company’s operating profit reached a level of € 392 million (2021: € 543 million), resulting in an operating margin of 7.0% (2021: 10.7%).

Net income from continuing operations reaches € 360 million
The company’s net income from continuing operations slightly declined to € 360 million (2021: € 387 million). This result was supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision. Consequently, basic EPS from continuing operations reached € 1.88 (2021: € 1.93) during the quarter.

Currency-neutral revenues on prior year level in the first half of 2022
In the first half of 2022, currency-neutral revenues were flat versus the prior year period. In euro terms, revenues grew 5% to € 10.897 billion in the first six months of 2022 (2021:
€ 10.345 billion). The company’s gross margin declined 1.7 percentage points to 50.1% (2021: 51.8%) during the first half of the year. While price increases as well as positive exchange rate effects benefited the gross margin, these developments were more than offset by the less favorable market mix and significantly higher supply chain costs. Other operating expenses increased to € 4.759 billion (2021: € 4.154 billion) in the first half of the year and were up 3.5 percentage points to 43.7% (2021: 40.2%) as a percentage of sales. adidas generated an operating profit of € 828 million (2021: € 1.248 billion) during the first six months of the year, resulting in an operating margin of 7.6% (2021: 12.1%). Net income from continuing operations reached € 671 million, reflecting a decline of € 219 million compared to the prior year level (2021: € 890 million). Accordingly, basic earnings per share from continuing operations declined to € 3.47 (2021: € 4.52).

Average operating working capital as a percentage of sales slightly decreases
Inventories increased 35% to € 5.483 billion (2021: € 4.054 billion) at June 30, 2022 in anticipation of strong revenue growth during the second half of the year. Longer lead times as well as the challenging market environment in Greater China also contributed to the increase. On a currency-neutral basis, inventories were up 28%. Operating working capital increased 23% to € 5.191 billion (2021: € 4.213 billion). On a currency-neutral basis, operating working capital was up 14%. Average operating working capital as a percentage of sales decreased 0.4 percentage points to 21.0% (2021: 21.4%), reflecting an overproportional increase in accounts payable due to higher sourcing volumes and product costs.

Adjusted net borrowings at € 5.301 billion
Adjusted net borrowings amounted to € 5.301 billion at June 30, 2022, representing a year-over-year increase of € 2.155 billion (June 30, 2021: € 3.146 billion). This development was mainly due to the significant decrease in cash and cash equivalents.

FY 2022 outlook reflects double-digit growth during the second half of the year
On July 26, adidas adjusted its guidance for FY 2022 due to the slower-than-expected recovery in Greater China since the start of the third quarter resulting from continued widespread covid-19-related restrictions. adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% to 13% range), reflecting a double-digit decline in Greater China (previously: significant decline). While so far the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any market other than Greater China, the adjusted guidance also accounts for a potential slowdown of consumer spending in those markets during the second half of the year as a result of the more challenging macroeconomic conditions. Therefore, growth in EMEA is now expected to be in the low teens (previously: mid-teens growth), while revenues in Asia-Pacific are projected to grow at a high-single-digit rate (previously: mid-teens growth). Despite the more conservative view on the development of consumer spending in the second half of the year, adidas has increased its forecasts for North America and Latin America reflecting the strong momentum the brand is enjoying in these markets. In North America, currency-neutral revenues are now expected to increase in the high teens. Sales in Latin America are projected to grow between 30% and 40% (both previously: mid- to high-teens growth).   

Due to the less favorable market mix and the impacts from initiatives to clear excess inventories in Greater China until the end of the year, gross margin is now expected to reach a level of around 49.0% (previously: around 50.7%) in 2022. Consequently, the company’s operating margin is now forecast to be around 7.0% (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion to € 1.9 billion range).

More information:
adidas financial year 2022
Source:

adidas

Photo: munich fabric start
02.08.2022

New Format oF MUNICH FABRIC START fully booked

THE SOURCE, the new one-stop solution for integrated fashion sourcing by Munich Fabric Start Exhibitions GmbH, is fully booked. In the Lokhalle, one of the largest cantilevered historic steel halls in Europe, THE SOURCE offers flexible sourcing services and solutions for newly conceived value chains on around 2,500 m2 in direct connection to MUNICH FABRIC START and BLUEZONE.
 
65 selected international manufacturing companies will present their offerings from cut-make-trim (CMT) to high-end production at the new fair from 30 August to 1 September 2022. A cluster of key sourcing countries such as Portugal, Turkey, Morocco, Tunisia, Bosnia and Vietnam will create a business-relevant mix for risk diversification, the right product mix and for every genre.
 
THE SOURCE will take place parallel to the MUNICH FABRIC START (30/08 – 01/09/2022) and BLUEZONE (30/08 – 31/08/2022) fairs, with a total of almost 900 exhibitors.

THE SOURCE, the new one-stop solution for integrated fashion sourcing by Munich Fabric Start Exhibitions GmbH, is fully booked. In the Lokhalle, one of the largest cantilevered historic steel halls in Europe, THE SOURCE offers flexible sourcing services and solutions for newly conceived value chains on around 2,500 m2 in direct connection to MUNICH FABRIC START and BLUEZONE.
 
65 selected international manufacturing companies will present their offerings from cut-make-trim (CMT) to high-end production at the new fair from 30 August to 1 September 2022. A cluster of key sourcing countries such as Portugal, Turkey, Morocco, Tunisia, Bosnia and Vietnam will create a business-relevant mix for risk diversification, the right product mix and for every genre.
 
THE SOURCE will take place parallel to the MUNICH FABRIC START (30/08 – 01/09/2022) and BLUEZONE (30/08 – 31/08/2022) fairs, with a total of almost 900 exhibitors.

Source:

KERN. Consulting for munich fabric start