From the Sector

Reset
50 results
Final report Heimtextil 2019 (c) Messe Frankfurt
11.01.2019

Heimtextil 2019: A lively start to the new furnishing season gives hope for a good business year ahead

The international home textiles industry has enjoyed a promising start at Heimtextil in Frankfurt am Main, which finished Friday, 11 January. The challenging economic situation and uncertainty in the retail sector were countered by a positive and confident mood at the world’s leading trade fair.

The international home textiles industry has enjoyed a promising start at Heimtextil in Frankfurt am Main, which finished Friday, 11 January. The challenging economic situation and uncertainty in the retail sector were countered by a positive and confident mood at the world’s leading trade fair.

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’. [*For comparison, 2018: 2,975 exhibitors from 64 countries; 68,584 visitors from 135 countries, FKM-tested)]

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’.

One topic that occupied both exhibitors and visitors was the current and future economic situation. A further challenge is the increasingly evident changes that are happening in trade. Increasing revenues and revenue shares in online retailing stand in the way of the efforts made by the stationary retail trade to maintain their inner-city businesses. ‘The small business specialist trade, but also department stores and multibrand stores, and thus the heart of our visitor target groups, are under pressure from the constantly increasing levels of e-commerce. With Heimtextil and our consumer goods fairs in general, we offer these retailers in particular clear perspectives and diverse inspiration in an ambiguous world’, continues Braun.

Heimtextil made it easier for its visitors to access valuable inspiration and business momentum thanks to an optimised trade fair concept and the associated new hall structure. ‘The new concept brought more visitors to the stand’, was the feedback from Andreas Klenk, Managing Director of Saum & Viebahn from Kulmbach in Franconia about hall 8.0 which offered textiles editeurs and manufacturers of curtain and sun protection systems a common platform for the first time. ‘It was the right decision to merge the different segments. We had high quality discussions with respect to both export and domestic business, and are satisfied with the trade fair’.

As part of the new concept, Heimtextil expanded its unique product range across the entire exhibition site and also included the new hall 12, which has been an additional architectural highlight on the Frankfurt exhibition grounds since September.

Top international companies from the Bed & Bath Fashion segment presented their wares here. For the company Curt Bauer from Aue in Saxony, the première of the new hall was a successful one. ‘We're very enthusiastic about the new hall 12. The product range there was very well received. We are very satisfied with the quality of visitors to our stand. In addition to a good frequency of German visitors, we are particularly pleased about growth from China and Russia’, says Managing Director Michael Bauer.

Natural materials, PET and ocean plastics 
Heimtextil set a standard in terms of sustainability: after the first global climate protection agreement for the textile industry was signed by 40 leading fashion companies, organisations and associations at the World Climate Conference in Katowice last December, the focus in Frankfurt was also on environmental progress in the textile industry. Numerous exhibitors presented progressive solutions, for example in the recycling of PET bottles and ocean plastic as well as in the use of certified natural materials. ‘Sustainability was the theme for us at this year’s Heimtextil. Major media players visited us and the 'Green Tour’ guided tour stopped by. We presented many things, including our first vegan duvet and fair silk products, all 100 per cent produced in Austria’, says Denise Hartmann, Marketing Manager at Hefel Textil. The topics of water consumption in the textile industry and microplastics also increasingly came to the fore. The exhibitor directory ‘Green Directory’ alone contained around 150 progressive companies listing sustainably produced textiles. The offer was supplemented by its own lecture series as well as theme-specific tours, which provided valuable impetus and
underpinned the pioneering green position of the trade fair.

Sleep becomes new lifestyle theme
Heimtextil also focused on sleep as one of the upcoming lifestyle trends. While a balanced diet and sufficient exercise are now a natural part of a healthy lifestyle, restorative sleep is still neglected* although it is one of the most important building blocks for long-term physical and mental well-being. At Heimtextil, a number of new products and aspects came to the fore that help people become sensitised to and analyse their sleep behaviour and promote healthy sleep. Around the redesigned hall 11.0 and in the adjoining lecture area ‘Sleep! The Future Forum’, representatives from the national and international bed industry enjoyed attractive product presentations and superb speeches on the topics of sustainability, hospitality, sport and digital.

In addition to the renowned trend show, the trade fair also focused on contract business, particularly in the hotel and hospitality sector, as well as decorative and upholstery fabrics, digital printing solutions and wallpapers.

The next Heimtextil in Frankfurt am Main – its 50th edition – will take place from 7 to 10 January 2020.

*According to a forsa investigation commissioned by the Techniker Krankenkasse

More information:
Heimtextil
Source:

Messe Frankfurt Exhibition GmbH

UltraBond, the cost-effective solution for fully recyclable, latex-free, sustainable carpets (c) Beaulieu Fibres International
10.01.2019

Beaulieu Fibres International: Cost-effective solution for fully recyclable, latex-free, sustainable carpets

  • Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
  • Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
  • UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

  • Latex-free: UltraBond allows 100% recyclable thermal bonded nonwovens
  • Sustainability & cost-efficiency: significant reductions in CO2 emissions and energy and water consumption for manufacturers of needlepunched exhibition & contract flooring
  • UltraBond debuts at Domotex 2019 Stand B56 Hall 11

Beaulieu Fibres International (BFI) unveils a unique opportunity for carpet manufacturers to create fully recyclable needlepunch carpets, and benefit from production and resource savings, without influencing performance.

Launched at Domotex 2019, new UltraBond is a patented polyolefin bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens. It opens up a new path for creating 100% polypropylene (PP) needlepunch carpets which meet the same performance requirements as traditional latex-bonded carpets while reducing the end-of-life environmental impact. Functional properties such as pilling resistance, resistance to wear and abrasion, and also UV resistance are guaranteed.

Using UltraBond manufacturers finally gain the potential to cost-efficiently produce 100% recyclable carpets. In addition to the general benefits of making recycled PP available for the plastics production chain and reduced waste generation, environmental advantages and financial savings arise from a total lack of water and less energy use. As a 100% dry process, thermal bonding uses no water and results in a total absence of waste water. There is also a reduction in the VOC level of the carpet. This all leads to a significant reduction in a needlepunch carpet’s ecological footprint.

The sustainability benefits are quantified through lifecycle analysis (LCA) of an exhibition carpet application – among the primary applications for needlepunch carpets. Evaluations show that the absence of water consumption directly translates into a large energy saving of 93% when using UltraBond compared to a latex bonding solution, and also a potential annual water saving of over 20 million litres for 100 million m2 of exhibition applications in the EU. Without the addition of any other bonding agent, CO2 emissions are reduced by 35% over the full production process.

Karena Cancilleri, Vice President Beaulieu Engineered Products, Beaulieu International Group, commented, “Recyclability and achieving a greener, more cost-effective production process without compromising on current performance levels are significant unsolved topics within today’s carpet industry. By eliminating the need for latex and chemical binders through UltraBond, we offer needlepunch manufacturers a breakthrough they have been looking for that boosts environmental and economic sustainability. We see textile flooring as just the beginning. Together with our customers, we look forward to exploring the potential of this unique thermal bonding fibre in other applications such as laminated nonwovens or as an alternative to dry powders.”

Discover more about UltraBond from the Beaulieu Fibres International team at Stand B56 Hall 11, Domotex 2019 in Hannover, Germany from January 11-14, 2019.

More information:
Beaulieu Fibres International
Source:

EMG

Award-winning TINTEX Textiles shows water saving solutions at Performance Days (c) TINTEX Textiles
80% Lenzing Modal® + 20% European Hemp rib by TINTEX Textiles
20.11.2018

Award-winning TINTEX Textiles shows water saving solutions at Performance Days

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

  • Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
  • Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

All the recent awards bestowed, demonstrate TINTEX continue research and commitment. They have been awarded for the Best product of the Base Layer Category by ISPO jury, moreover they have just received the prestigious German Design Awards 2019 and last but not least, they are selected as finalists for the Future Textile Awards in the category Best Innovation for Sustainable Textiles.
TINTEX continues to lead the way, as they proudly take part in the Make Fashion Circular initiative, by the Ellen MacArthur Foundation and activate change industry wide. This initiative aims to collaborate and innovate towards a new textile economy based on the principles of a Circular Economy.

In addition, since this November, TINTEX is a bluesign® system partner, thus means that they are responsibly acting parties of the textile value chain committed to applying the bluesign® system, continuously improving their environmental performance and always been focused on a sustainable future.

A milestone for TINTEX and fashion, as they launch Naturally Clean - an exceptional smart finishing process that is uniquely responsible. Naturally Clean enhances the natural beauty of cotton, takes a cost effective modern approach to eliminate aggressive treatments and optimizes clean surfaces, vivid colors, providing an exquisitely smooth handfeel. Naturally Clean achieves this by using Novozymes technology, a company that is indeed the world leader in biological solutions. Second, using textile chemicals with the lowest possible environmental impact, without compromising performance, from Beyond Surface Technologies AG. Naturally Clean maintains the original characteristics for an extended period of time. All materials are Oeko-Tex and soon bluesign® certified, thus eliminating harmful substances.
TINTEX’ Autumn/Winter 2019/2020 collection includes vibrant tones, refreshing turquoise and electric green, light and warm copper with chocolate browns that connect the natural and spiritual in an extra-sensorial universe. Infused with a stunning palette of nostalgic and multicultural colors - warm yellow with darkened reds, dynamic purple with urban greys - that express globalization and human connection.
Key smart ingredients of the season are:

  • A New Generation of Cotton: GOTS certified organic cotton, Supima® cotton, and ECOTEC® by Marchi & Fildi the smart cotton that saves up to 77.9% water consumption and introduces the concept of a circular economy.
  • SeaCell™ and Smartcel™: produced using the Lyocell process in a closed loop with no chemicals released as waste. The patented process of SeaCell™ allows that the positive properties of the seaweed are permanently preserved within the fiber, even after multiple washing cycles. Smartcel™ includes the essential trace element zinc providing anti-inflammatory capabilities.
  • REFIBRA™ by Lenzing technology involves upcycling a substantial proportion of cotton scraps e.g. from garment production, in addition to wood pulp, where the raw material is transformed to produce new TENCEL™ Lyocell fiber to make fabrics and garments.
  • Bemberg™ by Asahi Kasei: A new generation GRS Certified material, made from cotton linters, with a biodegradability certification by Innovhub. A matchless, high tech natural material, with a special handfeel and aesthetics.
  • ROICA™ by Asahi Kasei
    - ROICA™ EF has a percentage of pre-consumer recycled content that is more than 50%, and thanks to this it has been GRS (Global Recycled Standard) certified.
    - ROICA™ V550 a premium stretch innovative yarn boasting the Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients as it was evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

Of special interest this season, the two TINTEX’s fabrics that made it into the PERFORMANCE FORUM Jury’s Pick Category for their contribution to this season Topic “WATER – OUR RESPONSIBILITY”.

A smart rib developed to reduce the water usage as most as possible, from cultivation of raw materials until fabric finishing. A blend of TENCEL™ Modal, cellulosic & biodegradable material treated with no hazardous chemicals, pesticides nor fertilizers, and European hemp, a fast-growing plant that requires very little water and no herbicides, pesticides, synthetic fertilizers or GMO seeds. Both fibres are biodegradable.

The second selected article is a 100% Merino Wool jersey made unique thanks to Colorau® by TINTEX, a patented natural dyeing process technique that uses vegetable herbs and extracts. A great amount of water was saved by avoiding subsequent washing steps. Also, lower water pollution is achieved by avoiding synthetic dyestuffs.

More information:
TINTEX ROICA™ Performance Days
Source:

GB Network

(c) KLULE/Unsplash
Composites offer design freedom and exceptional mechanical properties at low weight for furniture applications
22.10.2018

Composites are opening up new horizons for the furniture industry

What does the furniture market look like and what potential composites offer for the furniture of today and tomorrow? The AZL is investigating this question together with companies from the composite and furniture industry. The result will be an overview of the current market and the materials used to date as well as an outlook on future mass applications for fiber-reinforced plastics (FRP). The study is open to interested companies and starts with a kick-off meeting at Composites Europe in Stuttgart on November 7th, 2018.

Furniture, its design and function have undergone major changes in recent decades: From robust lifelong companions to trend-setting models, from handmade one-of-a-kind pieces to mass products, from storage objects to multi-functional and “smart” all-rounders. This goes along with an increased diversity in terms of design and the materials used – and high potential for composites that offer additional design freedom and exceptional mechanical properties at low weight.

Study provides overview of furniture market and unique selling points of composites

What does the furniture market look like and what potential composites offer for the furniture of today and tomorrow? The AZL is investigating this question together with companies from the composite and furniture industry. The result will be an overview of the current market and the materials used to date as well as an outlook on future mass applications for fiber-reinforced plastics (FRP). The study is open to interested companies and starts with a kick-off meeting at Composites Europe in Stuttgart on November 7th, 2018.

Furniture, its design and function have undergone major changes in recent decades: From robust lifelong companions to trend-setting models, from handmade one-of-a-kind pieces to mass products, from storage objects to multi-functional and “smart” all-rounders. This goes along with an increased diversity in terms of design and the materials used – and high potential for composites that offer additional design freedom and exceptional mechanical properties at low weight.

Study provides overview of furniture market and unique selling points of composites
In order to systematically identify the potential of fiber-reinforced composites and to use them in future furniture applications, the AZL is starting a study together with companies from the furniture and composite industry. Within four and a half months the market for furniture will be segmented, design and technology trends will be identified and the technical requirements for furniture and furniture components will be broken down to identify applications with high potential for composites. The overall goal is to understand the selection process and needs of the furniture designer in order to bring composites to the market as a targeted alternative to conventional materials.

Virginia Bozsak, Technical Manager Composites at ARKEMA Innovative Chemistry is participating in the study: “The ever-growing population number requires environmentally friendly material and a solution for the end of life treatment to recollect and reuse materials. For fast changing markets such as the furniture market, these materials also need to offer an enormous freedom of design. Arkema already answers this demand with the only liquid thermoplastic resin Elium® used as a thermoset resin to produce composite structural or aesthetical parts. With the joint study, we aim to identify specific applications in the furniture market to make use of material which is not limiting creativity or design specifications but rather enabling the future to be revolutionized.”

 

Trevira presents high-end contract textiles for healthcare environments at Building Healthcare in Dubai (c) Trevira
From the bottom up: Schmitz Textiles GmbH & Co. KG: drapilux-167 Mattes & Ammann GmbH & Co.KG: 47 321-250 – Typ L Schmitz Textiles GmbH & Co. KG: drapilux-218 Schmitz Textiles GmbH & Co. KG: drapilux-218 Schmitz Textiles GmbH & Co. KG: drapilux-814
27.09.2018

Trevira presents high-end contract textiles for healthcare environments at Building Healthcare in Dubai

Bobingen - Trevira GmbH, Germany, is again participating as an exhibitor at this year’s Building Healthcare show in Dubai, from 2-4 October. The manufacturer of high-value polyester fibres will present a large variety of fabrics made by 12 partners from inherently flame retardant Trevira fibres and yarns.

Modern furnishing concepts for healthcare environments are making increasing demands in terms of quality, functionality, colouring and hygiene. Perfectly matched materials and colour concepts in the interior not only help to provide good orientation for the residents, but also create more attractive spaces. In addition, the use of appropriate textiles such as curtains, drapes, blinds and sliding panels, fabric-covered dividing panels, upholstery and bedding textiles, can improve the room acoustics, protect your privacy and let the room appear in a pleasant light. In healthcare environments where hygiene and cleanliness are of particular importance, antimicrobial textiles may be used.

Bobingen - Trevira GmbH, Germany, is again participating as an exhibitor at this year’s Building Healthcare show in Dubai, from 2-4 October. The manufacturer of high-value polyester fibres will present a large variety of fabrics made by 12 partners from inherently flame retardant Trevira fibres and yarns.

Modern furnishing concepts for healthcare environments are making increasing demands in terms of quality, functionality, colouring and hygiene. Perfectly matched materials and colour concepts in the interior not only help to provide good orientation for the residents, but also create more attractive spaces. In addition, the use of appropriate textiles such as curtains, drapes, blinds and sliding panels, fabric-covered dividing panels, upholstery and bedding textiles, can improve the room acoustics, protect your privacy and let the room appear in a pleasant light. In healthcare environments where hygiene and cleanliness are of particular importance, antimicrobial textiles may be used.

Trevira CS® and Trevira CS Bioactive® create a safe, attractive and comfortable environment in hospitals, clinics, spas, care homes and all other sectors in the contract sector.

Trevira CS Bioactive® contract textiles combine flame retardant and antimicrobial functions, which makes them the ideal material for use in healthcare facilities. They inhibit the growth of bacteria, prevent the formation of odours in/on the fibre and keep the textiles fresh for a longer time. The permanent flame retardant and bioactive properties of their fibres is integrated at molecular level, meaning that they remain unaffected by repeated washing, abrasion and ageing. This gives them an advantage over textiles with only a supplementary surface finish.

Trevira CS® and Trevira CS Bioactive® fabrics for the healthcare sector presented at the show stand come from these suppliers: Delius, Dina Vanelli, Fidivi Tessitura Vergnano, Gebrüder Munzert, JAB, Mattes & Ammann, Pugi, Rubelli, Rudolf Breuer Mechanische Weberei, Schmitz Textiles/drapilux, Subrenat, Verotex.

Trevira CS® and Trevira CS Bioactive® fabrics meet the requirements of the relevant international fire safety standards and can be certified according to the IMO regulations for the maritime sector. All Trevira fibres and yarns carry the Oekotex Standard 100 certificate. They are manufactured in accordance with the highest standards for sustainable products. A broad variety of collections with thousands of designs are available in Trevira CS® worldwide.

GST Achieves Sustainable Competitive Advantage through Unique Partnership with Lectra (c) Lectra
13.03.2018

GST Achieves Sustainable Competitive Advantage through Unique Partnership with Lectra

  • A unique partnership enabled Lectra to test its revolutionary laser-cutting technology in a real production environment while delivering sustainable competitive advantage to the world’s leading supplier of airbag cushions.

Reaching the next level of growth and performance
Global Safety Textiles (GST) is the leading independent producer of airbag fabric and airbag cushions and supplier to the majority of airbag manufacturers.
Recognized for its long tradition of research and development, GST uses stateof- the-art technology to manufacture technical textiles for a variety of passive safety applications.
With operations on four continents, the German group has a workforce of more than 5,000.

  • A unique partnership enabled Lectra to test its revolutionary laser-cutting technology in a real production environment while delivering sustainable competitive advantage to the world’s leading supplier of airbag cushions.

Reaching the next level of growth and performance
Global Safety Textiles (GST) is the leading independent producer of airbag fabric and airbag cushions and supplier to the majority of airbag manufacturers.
Recognized for its long tradition of research and development, GST uses stateof- the-art technology to manufacture technical textiles for a variety of passive safety applications.
With operations on four continents, the German group has a workforce of more than 5,000.
The company’s worldwide operations and resources enable it to fulfill high volumes of orders promptly, providing the global automotive industry with a steady supply of airbag fabrics and cushions.To address GST’s main business challenges and meet their demanding manufacturing specifications, the group evaluated the performance of FocusQuantum OPW for one-piece-woven (OPW) airbag fabric together with Lectra in the pre-launch phase of the advanced laser airbag cutting solution. Following successful testing of Lectra’s advanced airbag cutting technology in a real production environment in Poland, the group then decided to acquire FocusQuantum OPW for implementation in China.

A one-off join testing collaboration on customer premise
The result of a mutually beneficial collaboration between Lectra and its longstanding customer, specifications for laser OPW airbag cutting solution FocusQuantum took into account GST’s exacting requirements. Once the development of FocusQuantum OPW was completed, both companies agreed to conduct joint
testing. “We came to the idea of joint testing when we visited Lectra’s R&D center in Bordeaux,” says Uwe Zimmermann, COO, GST.
“We discussed taking validation of our specifications to the next level. The idea came up to do it directly in a manufacturing environment.”
The extensive testing enabled GST’s experts to certify FocusQuantum as a proven technological platform for the mass production of airbags. “Process capability was a formal part of validations at GST Poland,” recalls Piotr Siwek. Manufacturing Engineering Manager. “It was verified and confirmed that FocusQuantum meets GST’s targets. The biggest improvement over the previous solution was the software, which we also helped Lectra develop. FocusQuantum Suite is one of the biggest advantages.”

Worldwide standartisation and rollout in China
As a result of the successful joint testing, GST decided to proceed with implementation in China. “Because GST aims to become a major player in Asia,
implementation of FocusQuantum in China is the next logical step for us,” explains Zimmermann. “Standardization of all our equipment worldwide is mandatory for us. That’s why we decided to work with a global player like Lectra.” With more than twice the productivity of the previous solution, FocusQuantum
has exceeded GST’s performance targets. The significantly higher level of process capability has both improved cutting quality and reduced the number
of defective cut parts.
“When we compare the unit output and unit cutting cost, we see a real improvement over the previous generation, so we are quite satisfied with the machine,” notes Sky Yang, General Manager, GST China. “It’s more reliable and productivity is significantly higher.”

Source:

Nathalie Fournier-Christol, Lectra

Sustainable in many different ways: recycling at Trevira © Trevira GmbH
Sinfineco-Label
05.10.2017

Sustainable in many different ways: recycling at Trevira

Bobingen - On the 4th October 2017 a new brand was introduced at Trevira: Trevira SINFINECO®. This label may be carried by all textiles that contain sustainable Trevira products. Sustainable, innovative, high-value and responsible – these are the values the new brand stands for.

As an industrial enterprise, Trevira is conscious of its special responsibility for an intact environment and has long advocated the recycling of valuable raw materials and waste products. Trevira CEO Klaus Holz: “We at Trevira wish to preserve the environment and at the same time work to create value. These are the criteria of our sustainability concept.“

Creation of the new brand is therefore only a logical step, one that enables customers to label their sustainable Trevira products as such. Trevira is known for the high quality of its products. In every way recycled products are as good as the original materials in terms of quality and performance.

Two vital elements in Pre-Consumer Recycling and an important concept in Post-Consumer Recycling form part of the sustainability strategy of Trevira to conserve resources and maintain value. :

Bobingen - On the 4th October 2017 a new brand was introduced at Trevira: Trevira SINFINECO®. This label may be carried by all textiles that contain sustainable Trevira products. Sustainable, innovative, high-value and responsible – these are the values the new brand stands for.

As an industrial enterprise, Trevira is conscious of its special responsibility for an intact environment and has long advocated the recycling of valuable raw materials and waste products. Trevira CEO Klaus Holz: “We at Trevira wish to preserve the environment and at the same time work to create value. These are the criteria of our sustainability concept.“

Creation of the new brand is therefore only a logical step, one that enables customers to label their sustainable Trevira products as such. Trevira is known for the high quality of its products. In every way recycled products are as good as the original materials in terms of quality and performance.

Two vital elements in Pre-Consumer Recycling and an important concept in Post-Consumer Recycling form part of the sustainability strategy of Trevira to conserve resources and maintain value. :

In the area of Pre-Consumer Recycling, on the one hand, residual materials resulting from the manufacture of polyester fibres and filaments in Bobingen and Guben, dependent on the manufacturing step, are processed in the agglomeration plant and restored to become serviceable primary material. The recyclates are then fed back to our fibre and filament spinning mills, to be made into new top-quality products.

On the other hand, in fibre production there occurs in the manufacture of tow a small proportion of tow that cannot be used for converting and has to be cut out. Instead of selling this material as waste, it is cut up, pressed into balls and then carded / combed by a partner, resulting in a 1A quality product. The GRS certification (Global Recycled Standard) is requested for this. As with converter tow from new material, the recycled tow is mostly incorporated into polyester wool blends (55 % PET / 45 % wool), which are used primarily in corporate wear and uniforms.

In the area of Post-Consumer Recycling, Trevira offers filament yarns consisting of 100 % recycled PET bottles. Our parent company Indorama manufactures very high quality recycled chips from PET bottles. Since only transparent PET bottles are used in Thailand, the flakes and chips are of a particularly good and very uniform quality. The recycled chips, fibres and filaments from Indorama bear the GRS certificates (Global Recycled Standard) and RCS-NL (Recycled Claim Standard). Trevira processes the regranulate made by Indorama from bottle flakes into filament yarns consisting 100 % of recycled material. The filament yarns are available in titres 167 and 76 dtex normal polyester. Alongside technical applications, they are used in the automotive and apparel sectors. In addition, many promising developments with the recycled material are on their way.

INVISTA at Intertextile Shanghai Apparel Fabrics ©Messe Frankfurt
INVISTA to showcase ‘Innovative Attitude’ at Intertextile Shanghai Apparel Fabrics
27.09.2017

INVISTA at Intertextile Shanghai Apparel Fabrics

  • INVISTA to showcase ‘Innovative Attitude’ at Intertextile Shanghai Apparel Fabrics
  • Innovative INVISTA products, findings from a new textile industry IP protection survey, in-depth consumer insights and fashion trends will be revealed

INVISTA, one of the world’s largest integrated producers of polymers and fibres, will showcase the innovative attitudes enabling it to maintain a leading position in the textile industry at the upcoming Rendez-Vous 2017 at October’s Intertextile Shanghai Apparel Fabrics – the world’s most influential apparel event. INVISTA Rendez-Vous will showcase innovative INVISTA products, offer consumer insights and reveal the results of a textile industry IP protection survey.

INVISTA Rendez-Vous 2017 will be held at Intertextile Shanghai Apparel Fabrics 11 – 13 October at the National Exhibition and Convention Center in Shanghai, with INVISTA occupying two booths in hall 5.2 E49 and hall 7.2 E55. 

  • INVISTA to showcase ‘Innovative Attitude’ at Intertextile Shanghai Apparel Fabrics
  • Innovative INVISTA products, findings from a new textile industry IP protection survey, in-depth consumer insights and fashion trends will be revealed

INVISTA, one of the world’s largest integrated producers of polymers and fibres, will showcase the innovative attitudes enabling it to maintain a leading position in the textile industry at the upcoming Rendez-Vous 2017 at October’s Intertextile Shanghai Apparel Fabrics – the world’s most influential apparel event. INVISTA Rendez-Vous will showcase innovative INVISTA products, offer consumer insights and reveal the results of a textile industry IP protection survey.

INVISTA Rendez-Vous 2017 will be held at Intertextile Shanghai Apparel Fabrics 11 – 13 October at the National Exhibition and Convention Center in Shanghai, with INVISTA occupying two booths in hall 5.2 E49 and hall 7.2 E55. 

As a global authoritative trade show in textile industry, Intertextile Shanghai Apparel Fabrics has been a platform for INVISTA to communicate with players across the value chain for 23 years. This year’s event will be no exception. The rich and vivid content delivered at the show will focus on INVISTA’s Innovative Attitude to consumers, partners as well as the whole industry.

To build a healthy and sustainable marketing environment, INVISTA cooperated with a number of media organisations to conduct a survey on IP protection in the textile industry. The results will be revealed during a seminar entitled ‘Innovation and IP: An Avenue for Sustainable Textile Industry Development’, which will be held on 11 October, 2:45 – 3:45pm in the Textile Dialogue area in hall 5.2. Representatives from textile industry associations, legal firms and INVISTA will share the findings and offer insights during what will undoubtedly be one of the highlights of INVISTA Rendez-Vous 2017.

The main pavilion of the show will be located in the International Hall (hall 5.2), where three of INVISTA’s most innovative products will be on show. Visitors will experience the latest possibilities offered by LYCRA® MOVESTM BRA, LYCRA® MOVESTM LEGGINGS and LYCRA® MOVESTM HOSIERY.

LYCRA® MOVESTM BRA

According to consumer research conducted in 2016, bra products in China’s domestic market don’t match consumer demands in a host of critical areas, including support, comfort and aesthetic design. To address these concerns, streamline the industry and consolidate its leadership, INVISTA is launching LYCRA® lastingFIT technology for bra wings. In addition, INVISTA’s cutting-edge technology can contribute to meeting specific quality standards in bra wing fabrics, enabling Chinese consumers to experience higher levels of comfort and the appropriate support they expect from a bra in different occasions.

LYCRA® MOVESTM LEGGINGS

INVISTA’s longstanding commitment to legging fabrics will also be on display at Rendez-Vous. INVISTA’s LYCRA® MOVESTM LEGGINGS has already spawned LYCRA® SPORT Power-Comfort-Energy (PCE™) index-certified fabrics, which are now commercially available.

The revolutionary fabrics present excellent recovery performance for LYCRA® SPORT legging products. They also offer the industry an opportunity to develop a number of targeted segment markets – from compression and medium compress to light compression leggings.

LYCRA® MOVESTM HOSIERY

LYCRA® MOVESTM HOSIERY is all about fabric technology innovation. Due to excellent properties, such as anti-laddering, fit and durability as well as comfortable waistbands, INVISTA’s LYCRA® FUSIONTM technology has already been widely adopted in China’s hosiery sector.

A Packed Pavilion

At the LYCRA® MOVESTM Denim pavilion in the Beyond Denim hall (7.2), visitors won’t just see the innovative denim products offered by INVISTA; they will also learn about three themes highlighted through consumer insights – fit, shape and embracing heat & cold. There will also be a special session outlining the latest woven bottom trends, hosted by INVISTA experts.

Introduced commercially in 2010, LYCRA® dualFX® dual core yarn technology provides denim with super stretch and super recovery that fits all day and every day. It effectively prevents seam slippage and uneven fabric surfaces, keeping denim looking good, feeling comfortable and fitting, which in turn creates new denim fabric applications and fashion trends in the China market.

Last But Not Least

An interactive program, that includes visitors uploading pictures they take at the INVISTA booth to the official INVISTA WeChat account, will give every visitor a chance to win a special INVISTA gift. Visit INVISTA at hall 5.2 E49 and hall 7.2 E55 from 11 – 13 October at Intertextile Shanghai Apparel Fabrics 2017.

DyStar and CSI launch their Sustainable Color and Trend magazine ©DyStar
DyStar and CSI launch their Sustainable Color and Trend magazine
18.09.2017

DyStar and CSI launch their Sustainable Color and Trend magazine

As a combined effort of the CSI color team and DyStar’s technical experts, DyStar and CSI are launching the first 2 issues of the Sustainable Color and Trend magazine with Cadira® color palettes.

This new magazine inspires Designers and Color Managers by offering palettes and color combinations that are Eco-friendly and Inspired by Nature. Not only does the magazine include a wide range of color palettes, but also color validation in CSI’s Relative Color Popularity (RCP) information as well as sustainable dye recipes that have been formulated based on the Cadira resource optimization process.

The Cadira Concept is a module in DyStar’s Resource Efficiency program. It helps to considerably shorten lead times and reduce water, waste and energy consumption. Cadira Concepts have been developed for different substrates and dyeing procedures. This launch focuses on both reactive dyeing of cotton as well as polyester & recycled polyester dyeing.

As a combined effort of the CSI color team and DyStar’s technical experts, DyStar and CSI are launching the first 2 issues of the Sustainable Color and Trend magazine with Cadira® color palettes.

This new magazine inspires Designers and Color Managers by offering palettes and color combinations that are Eco-friendly and Inspired by Nature. Not only does the magazine include a wide range of color palettes, but also color validation in CSI’s Relative Color Popularity (RCP) information as well as sustainable dye recipes that have been formulated based on the Cadira resource optimization process.

The Cadira Concept is a module in DyStar’s Resource Efficiency program. It helps to considerably shorten lead times and reduce water, waste and energy consumption. Cadira Concepts have been developed for different substrates and dyeing procedures. This launch focuses on both reactive dyeing of cotton as well as polyester & recycled polyester dyeing.

The reactive-issue – Inspired by Nature – offers color palettes with softer, muted tones, levels of neutrals and earthy shades of green. The recipes are based on DyStar Levafix® and Remazol® combined with Sera® chemicals for an optimized dyeing and wash-off process.

The Polyester issue offers more vibrant color options with saturated colors and brights for active wear and outdoor clothing and accessories. The recipes are based on Dianix® dyes and the dyeing process can be optimized by use of the Optidye® PES program.

“We are conscious about our environment so we wanted to create a magazine with an ecological color and optimized processes so that our customers can pick the right color that will help them reduce their environmental impact in the design process.” Says Ron Pedemonte, VP of Sales and Marketing Americas.

CSI will fcus more on color palettes with ecological dyes and low impact processes when offering color and trend information to customers in the future. More eco-friendly color palettes will be available very soon.

More information about CSI color trends and the Cadira process is available in the DyStar Website and CSI Website. www.dystar.com / www.csicolors.com

Source:

DyStar Press Info

Green products to be centre stage at October’s Yarn Expo Autumn ©Messe Frankfurt
Logo Yarn Expo
08.09.2017

Green products to be centre stage at October’s Yarn Expo Autumn

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

Amongst a record number of exhibitors at this October’s Yarn Expo Autumn, the debut BCI Pavilion as well as the Sateri Pavilion and Birla Planet Pavilion that include eco-friendly products are certainly amongst the highlights this year. Better Cotton Initiative (BCI) is a global organisation with more than 1,000 members including spinners, weavers and garment manufacturers throughout the entire cotton sector. It aims to promote sustainable cotton production, benefiting workers, customers and the environment as a whole. They will form the BCI Pavilion in Yarn Expo for the first time, with five spinners showcasing their cotton yarn manufactured with eco-friendly cotton.

Sateri is a well-known brand in China which specialises in viscose rayon. This natural and high-quality fibre is made from trees grown on renewable plantations. They are the largest producer of viscose fibre in China with three mills and an annual capacity of 550,000 tons, and also have Oeko-Tex certification. This October, nine other domestic exhibitors will form the Sateri Pavilion to demonstrate their comfortable textiles and skin-friendly hygiene products made from viscose fibre.

With over 50 years of experience in manufacturing cellulosic fibres, Birla Group strives to provide greener, purer and safer products to its customers. The Group has operated in China for three years now, and values Yarn Expo’s effectiveness in helping them to promote their brand and attract a wide range of buyers. “We managed to get connected with a number of downstream buyers at the fair. We have introduced our company and products to them that there is great chance for future cooperation.” said Mr Peter Dong, Senior Manager of Aditya Birla Group.   Coming back this year, the Birla Planet Pavilion will feature three of their highlighted fibres – Birla Viscose, Birla Modal and Birla Spunshades at the fair.

Six special display zones cater to latest industry trends

The textile industry in China is undergoing a structural change with keen competition, so domestic suppliers have to develop innovative and quality products to satisfy the ever-changing markets. To match the specific needs of various buyers, Yarn Expo has established six distinct display zones gathering the leading domestic companies, namely Colourful Chemical Zone, Natural Cotton Yarn Zone, Fancy Yarn Zone, Quality Wool Zone, Green Linen Zone and e-Commerce Zone.

Not only are a number of chemical fibre products with innovative, eco-friendly and health & comfort properties on offer from exhibitors, but visitors can also gain insights into product trends in these areas from the 2017/18 China Fibre Trend Area and Innovative Textile Material Forum, both of which feature in the Colourful Chemical Zone. The Natural Cotton Yarn Zone is another highlight of the three-day show, where exhibitors will showcase their natural cotton yarn and a range of functional products. Around 50 suppliers will also showcase their latest collections in the expanded Fancy Yarn Zone.
In response to the strong demand for fibre and yarn products in China and the Asian region, the coming autumn edition of Yarn Expo will double its exhibition space, and will accommodate around 500 global yarn suppliers from 13 countries and regions. Together with Yarn Expo Autumn 2017, three other textile trade fairs are held concurrently from 11 – 13 October in the same venue: Intertextile Shanghai Apparel Fabrics – Autumn Edition, PH Value and the China International Fashion Fair (CHIC).

Yarn Expo Autumn is organised by Messe Frankfurt (HK) Ltd; The Sub-Council of Textile Industry, CCPIT; China Cotton Textile Association; China Wool Textile Association; China Chemical Fiber Association; China Bast & Leaf Fibres Textiles Association; and China Textile Information Centre.