From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
3818 results
28.04.2023

ANDRITZ: Outlook for the full year 2023

International technology group ANDRITZ has started the 2023 business year with unchanged high growth dynamics despite a slowing global economy. Revenue and operating result both increased significantly by well over 20 percent in the first quarter of 2023 compared with the same period of the previous year. Net income improved by almost 50 percent to 104.5 million euros (MEUR). Order intake reached a favorable level of 2.4 billion euros but was 6.5 percent below the figure for the first quarter of 2022, when the booking of two large-scale orders had provided a peak.

The key financial figures developed as follows during the reporting period:

International technology group ANDRITZ has started the 2023 business year with unchanged high growth dynamics despite a slowing global economy. Revenue and operating result both increased significantly by well over 20 percent in the first quarter of 2023 compared with the same period of the previous year. Net income improved by almost 50 percent to 104.5 million euros (MEUR). Order intake reached a favorable level of 2.4 billion euros but was 6.5 percent below the figure for the first quarter of 2022, when the booking of two large-scale orders had provided a peak.

The key financial figures developed as follows during the reporting period:

  • Order intake amounted to 2,420.2 MEUR and was thus 6.5% below the high level of the previous year’s reference period (Q1 2022: 2,588.6 MEUR), which included two large-scale orders. The Metals business area was able to increase its order intake significantly compared to the previous year’s reference period.
  • The order backlog as of March 31, 2023 amounted to 10,407.8 MEUR and has thus increased compared to 2022 (December 31, 2022: 9,976.5 MEUR).
  • Revenue at 1,962.6 MEUR was 28.5% higher than the reference figure for the previous year’s reference period (Q1 2022: 1,526.9 MEUR). All four business areas were able to significantly increase their revenue compared to the previous year.
  • The operating result (EBITA) increased in line with revenue, reaching a very favorable level at 158.5 MEUR in the first quarter of 2023 (+29.6% versus Q1 2022: 122.3 MEUR). The Group’s profitability (EBITA margin) increased slightly to 8.1% (Q1 2022: 8.0%).
  • Net income (without non-controlling interests) increased significantly to 104.5 MEUR (Q1 2022: 71.5 MEUR).

Following the successful first quarter, ANDRITZ confirms its previously published outlook for the full year 2023. Both revenue and earnings for the full year are expected to be above the level of 2022.

More information:
Andritz financial year 2023
Source:

ANDRITZ AG

print close
more
28.04.2023

BVMed kritisiert GKV-Vertragsentwurf zu Pflegehilfsmitteln

Der Bundesverband Medizintechnologie (BVMed) kritisiert den neuen Vertragsentwurf des GKV-Spitzenverbandes für zum Verbrauch bestimmte Pflegehilfsmittel als rückwärtsgerichtet und überbürokratisch. „Keine Spur von Entbürokratisierung, Digitalisierung oder Nachhaltigkeit. Der GKV-Verband hat die Zeichen der Zeit nicht erkannt und macht das Gegenteil von dem, was notwendig wäre“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Der Bundesverband Medizintechnologie (BVMed) kritisiert den neuen Vertragsentwurf des GKV-Spitzenverbandes für zum Verbrauch bestimmte Pflegehilfsmittel als rückwärtsgerichtet und überbürokratisch. „Keine Spur von Entbürokratisierung, Digitalisierung oder Nachhaltigkeit. Der GKV-Verband hat die Zeichen der Zeit nicht erkannt und macht das Gegenteil von dem, was notwendig wäre“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

Gesetzlich Pflegeversicherte haben bei entsprechender Erfordernis Anspruch auf Pflegehilfsmittel (PHM) in Höhe von bis zu 40 Euro monatlich. Dazu gehören beispielsweise Einmalhandschuhe, Bettschutzeinlagen oder Desinfektionsmittel. Einzelheiten werden in Verträgen der Hilfsmittel-Leistungserbringer mit dem GKV-Spitzenverband geregelt. Zu den Mitgliedern des BVMed gehören neben Herstellern von Medizinprodukten auch Hilfsmittel-Leistungserbringer und Homecare-Versorger, die Patient:innen ambulant unter anderem mit Pflegehilfsmitteln versorgen. Diese Pflegeleistung ist im Gegensatz zu anderen Leistungen unbürokratisch und leicht beantragbar. Die eigentlichen Hürden ergeben sich aus dem Rahmenvertrag des GKV-Spitzenverbandes zur Versorgung und Abrechnung dieser Produkte.

Der BVMed hatte der Krankenkassenseite im August 2022 daher „umfangreiche Handlungsoptionen für Bürokratieabbau, Digitalisierung und Nachhaltigkeit beim Pflegehilfsmittel-Vertrag vorgeschlagen“, erläutert BVMed-Hilfsmittelexpertin Juliane Pohl.

  • Zur administrativen Verschlankung schlug der BVMed beispielsweise eine allgemeine Genehmigung der individuellen Versorgung mit Pflegehilfsmitteln über alle Produkte hinweg vor. Einzelne Kassen praktizieren dies bereits und reduzieren damit den Abstimmungsaufwand. Gleiches gilt für die Aufhebung zeitlicher Genehmigungsfristen zur Vermeidung von aufwendigen Folgeprozessen Diese Maßnahmen führen zudem zur Senkung der Verwaltungskosten bei den Pflegekassen.
  • Für eine stärkere Digitalisierung und Automatisierung von Prozessen sprach sich der BVMed für eine verpflichtende Einführung eines elektronischen Kostenvoranschlagsverfahrens und die Einführung der papierlosen Abrechnung aus. Aktuell müssen nach Informationen der BVMed-Mitglieder noch rund 50 Prozent der Genehmigungen gegenüber der Pflegekasse in Papierform erfolgen. Ein großer Anteil der Genehmigungen ist zudem befristet, sodass der Aufwand wiederholt anfällt. Dies ist weder nachhaltig noch passt es in die Digitalstrategie der Bundesregierung

Der am 5. April 2023 vom GKV-Spitzenverband vorgelegte Pflegehilfsmittel-Vertragsentwurf ist aus Sicht der BVMed-Expertin vor dem Hintergrund einer notwendigen Entbürokratisierung und Digitalisierung dagegen eine einzige Enttäuschung. „Er erhöht die teilweise analogen Dokumentationspflichten, hält an analogen Prozessen zum Kostenvoranschlag und zur Abrechnung fest oder fordert sogar neue Dokumente in Papierform, bläht Prozesse damit auf und verursacht damit vermeidbare Aufwände und ökologische Kosten auf Seiten der Leistungserbringer und der Pflegekassen“, so Pohl. „Wir brauchen endlich auch bei den Pflegehilfsmitteln schlankere, digitale und nachhaltige Prozesse, die eine zeitnahe Versorgung der Betroffenen ermöglichen und einen optimierten Ressourceneinsatz gewährleisten“, fordert der BVMed

 

More information:
BVMed Medizin und Gesundheitsindustrie Handschuhe Digitalisierung Nachhaltigkeit
Source:

BVMed | Bundesverband Medizintechnologie e.V.

print close
more
Photo: EREMA/Wakolbinger
Manfred Hackl, CEO EREMA Group GmbH
28.04.2023

EREMA Group ends financial year 2022/23

Around EUR 355 million in overall turnover, 350 extruders delivered creating an additional recycling capacity for 1.6 million tons of recycled pellets as a result - these are the figures with which the EREMA Group was able to close the 2022/23 financial year in March.

"With demand for recycled plastics remaining high, the past financial year brought many challenges that we needed to handle," says Manfred Hackl, CEO of EREMA Group GmbH. The challenges included persistent delays in the supply chain and unexpected supplier outages. Logistics and production processes had to be adapted several times as a result. The situation has improved significantly meantime as a result of these measures and more stable supply chains.

Around EUR 355 million in overall turnover, 350 extruders delivered creating an additional recycling capacity for 1.6 million tons of recycled pellets as a result - these are the figures with which the EREMA Group was able to close the 2022/23 financial year in March.

"With demand for recycled plastics remaining high, the past financial year brought many challenges that we needed to handle," says Manfred Hackl, CEO of EREMA Group GmbH. The challenges included persistent delays in the supply chain and unexpected supplier outages. Logistics and production processes had to be adapted several times as a result. The situation has improved significantly meantime as a result of these measures and more stable supply chains.

The production locations in Austria manufactured 270 extruders and delivered them to customers around the globe. Taking the whole group into consideration, this figure rises to 350 including the extruders from PLASMAC, the Italian subsidiary. The recycled pellet production capacity of all extrusion systems delivered in financial year 2022/23 adds up to around 1.6 million tonnes per year. On top of that there are around 130 additional components and modules such as filter systems and ReFresher anti-odour units.

Recycling innovations for high-quality pellets
K 2022 - the highlight trade fair of the past financial year - saw the EREMA Group launch seven
new recycling systems and components. These included the new INTAREMA® TVEplus® DuaFil® Compact recycling system and the EcoGentle® plasticising unit, which was also newly developed. Thanks to their gentle polymer treatment and significantly lower melt temperature, both extrusion innovations deliver effective advantages in terms of the quality of the melt, recycled pellets, and final product, as well as impressive energy efficiency in post consumer and PET recycling applications. The significance of these innovations for plastics recycling is underlined by the nomination of the DuaFil® Compact technology for one of this year's Plastics Recycling Awards Europe in the category Recycling Machinery Innovation of the Year.
The same applies to the READYMAC 1109 TVE machine made to stock by EREMA Group subsidiary UMAC, as well as to the new ALPHA XS edge trim recycling machine for the inhouse recycling segment made by PLASMAC. The market launch of the deinking system presented at K 2022 by the EREMA Group company KEYCYCLE delivering a throughput of 1,200 kilograms per hour has been a success, as has the commissioning of a further unit sold to a film manufacturer.

40 years of EREMA
The beginning of the new financial year falls almost to the day on EREMA's 40th anniversary. On 14 April 1983, Helmut Bacher, Helmuth Schulz and Georg Wendelin founded EREMA Engineering Recycling Maschinen und Anlagen GesmbH, laying the foundation for the 40-year success story. In celebration, the comapny will hold the event EREMA Discovery Day at the company headquarters on the 1st of June. This event with live insights into the latest post consumer and PET recycling technologies will also see the official opening of the newly built research and development centre.

More information:
EREMA EREMA Group financial year 2022 plastics recycling Recycling PET recycling
Source:

EREMA Group GmbH

print close
more
26.04.2023

STFI: Bionanopolis Open Call to support companies

The international association that will manage the Single-Entry-Point (SEP) of the BIONANOPOLYS project has been formally constituted and will be able to support companies across the European Union in the market introduction of bionanomaterials through technical, legal, regulatory, safety, economic and financial support services.

The SEP was established as an AISBL (non-profit entity) on 17 February 2023 in the framework of the European project BIONANOPOLYS, funded by the Horizon 2020 programme. The technical director of ITENE and coordinator of this project, Carmen Sánchez, is the president of this association in which representatives of other project partners also act as directors. Specifically, the CTP (Centre Technique du Papier) from France; CIDAUT (Fundación para la Investigación y Desarrollo en Transporte y Energía), from Spain; CENTI (Centre for Nanotechnology and Smart Materials), from Portugal, and the law firm Gil & Robles - San Bartolome & Associés, from Luxembourg.

The international association that will manage the Single-Entry-Point (SEP) of the BIONANOPOLYS project has been formally constituted and will be able to support companies across the European Union in the market introduction of bionanomaterials through technical, legal, regulatory, safety, economic and financial support services.

The SEP was established as an AISBL (non-profit entity) on 17 February 2023 in the framework of the European project BIONANOPOLYS, funded by the Horizon 2020 programme. The technical director of ITENE and coordinator of this project, Carmen Sánchez, is the president of this association in which representatives of other project partners also act as directors. Specifically, the CTP (Centre Technique du Papier) from France; CIDAUT (Fundación para la Investigación y Desarrollo en Transporte y Energía), from Spain; CENTI (Centre for Nanotechnology and Smart Materials), from Portugal, and the law firm Gil & Robles - San Bartolome & Associés, from Luxembourg.

The BIONANOPOLYS SEP will reduce the risks and barriers to the commercial exploitation of bio-based materials and polymeric bionanocomposites with nanotechnology and accelerate market penetration and innovation processes. SMEs, large companies, and potential customers who are users of the BIONANOPOLYS OITB (Open Innovation Test Bed) will be able to access the services offered by the project partners through this entity, which will act as a one-stop shop, at affordable costs and conditions.

The test bed consists of 14 enhanced pilot plants and complementary services to support technological and commercial breakthroughs. Collaboration between all the partners that make up BIONANOPOLYS and access through the SEP allows joint access to all the services offered by the partners and helps to drive collaborative open innovation.

Call for access to the BIONANOPOLYS OITB
The SEP and the project partners will be in charge of evaluating the projects submitted to the BIONANOPOLYS platform once the open call launched last February to select five projects from different European countries that will be able to access its services free of charge to develop, test or scale-up bionanomaterials in the BIONANOPOLYS OITB closes.

Companies wishing to access the services to develop or test nanomaterials can submit their applications until 30 April.

The BIONANOPOLYS test bed could benefit companies involved in the production of biopolymers, cellulose paper, nonwovens, foams, or coatings, as well as the packaging, agriculture, food, cosmetics, pharmaceuticals, hygiene, textiles and 3D printing sectors.

More information:
Bionanopolis STFI project bio-based nanotechnology
Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

print close
more
(c) IVL
26.04.2023

Indorama Ventures joins “Together for Sustainability” initiative

Indorama Ventures Public Company Limited (IVL) has joined “Together for Sustainability” (TfS), a global initiative for sustainable supply chains. Indorama Ventures joins a network of 47 TfS member companies representing the global chemical industry, reinforcing its commitment to driving sustainable solutions in its supply chain management.

Indorama Ventures Public Company Limited (IVL) has joined “Together for Sustainability” (TfS), a global initiative for sustainable supply chains. Indorama Ventures joins a network of 47 TfS member companies representing the global chemical industry, reinforcing its commitment to driving sustainable solutions in its supply chain management.

By joining TfS, Indorama Ventures is encouraging suppliers to meet high sustainability standards, reduce the risk of supply chain disruptions, and improve overall climate maturity. The collaboration will help foster an expansion of the company’s sustainable supply chain program. The company will contribute to the TfS Scope 3 Greenhouse Gas (GHG) workstream that developed and finetunes the Guideline for calculating Product Carbon Footprints (PCFs) in the chemical industry and beyond and, will develop an IT solution that will enable companies to share PCFs efficiently. This membership allows Indorama Ventures to further align with the UN Global Compact Principles.
 
Through this initiative, Indorama Ventures will also be partnering with EcoVadis to assess their suppliers to identify risks and opportunities along the value chain, improve sustainability practices, and encourage collaboration among members.

More information:
Indorama Ventures Public Company Limited Together for Sustainability Sustainability chemical industry
Source:

Indorama Ventures Public Company Limited 

print close
more
26.04.2023

Tata Communications führt 3C-Nachhaltigkeitsstrategie ein

Tata Communications, ein globaler Anbieter von digitalen Ökosystemen, verkündet heute seine Verpflichtung, bis zum Jahr 2035 in allen seinen globalen Betrieben das Netto-Null-Ziel zu erreichen. Anlässlich des "Earth Day 2023/Invest in our Planet" hat sich Tata Communications das Ziel gesetzt, noch mehr in die Nachhaltigkeit zu investieren.

Im Rahmen dieses Ziels skizziert Tata Communications seine 3Cs für den Umweltschutz und wie sie Unternehmen unterstützen können:

Tata Communications, ein globaler Anbieter von digitalen Ökosystemen, verkündet heute seine Verpflichtung, bis zum Jahr 2035 in allen seinen globalen Betrieben das Netto-Null-Ziel zu erreichen. Anlässlich des "Earth Day 2023/Invest in our Planet" hat sich Tata Communications das Ziel gesetzt, noch mehr in die Nachhaltigkeit zu investieren.

Im Rahmen dieses Ziels skizziert Tata Communications seine 3Cs für den Umweltschutz und wie sie Unternehmen unterstützen können:

  • Climate Action - Umweltengagement durch Steigerung der Energieeffizienz und den weltweiten Einsatz erneuerbarer Energien. Dadurch will das Unternehmen bis zum Geschäftsjahr 2030 kohlenstoffneutral* und bis 2035 Netto-Null** werden.
  • Customer GHG (Green House Gas Emission) Savings - Durch die Entwicklung und Bereitstellung grüner oder kohlenstoffarmer Lösungen in den Bereichen IoT-Lösungen, Media & Entertainment Services, Cloud, Business Collaboration-Plattformen, mit denen die Lieferketten der Kunden umweltfreundlicher werden und zugleich ihre Wettbewerbsfähigkeit gesteigert wird. Dafür beträgt das Potenzial zur Reduzierung der Treibhausgasemissionen der Kunden des Unternehmens um 20X bis zum Geschäftsjahr 2027 (X steht für die Scope 1- und Scope 2-Emissionen* von Tata Communications).
  • Circular Economies in India - Durch die Implementierung eigener IoT-Lösungen, einschließlich intelligenter Messgeräte zur Echtzeitverfolgung des Wasserverbrauchs sowie von Wasserlecks an den wichtigsten Standorten des Unternehmens in Indien, die Einführung von Regenwasserauffangsystemen und die Steigerung des Wasser- und Abfallrecyclings in den Hauptstandorten des Unternehmens in Indien. So will das Unternehmen den Frischwasserverbrauch bis zum Geschäftsjahr 2030 um 20 % senken (im Vergleich zum Geschäftsjahr 2020). Zudem hat sich das Unternehmen verpflichtet, bis 2027 in Indien keine Abfälle mehr zu deponieren, wobei die Abfälle entweder wiederverwendet, recycelt oder kompostiert werden.

Mit Vertrauen und digitaler Kompetenz hat sich Tata Communications das Ziel gesetzt, nachhaltige Lösungen, skalierbare Ergebnisse und sichere Ökosysteme zu schaffen. Die Nachhaltigkeitsstrategie von Tata Communications orientiert sich an den Zielen für nachhaltige Entwicklung der Vereinten Nationen und der Nachhaltigkeitsstrategie der Tata Group, um einen gemeinsamen Wert für alle zu schaffen.

* Klimaneutral ist in Bezug auf Scope-1- und Scope-2-Emissionen. Scope 1-Emissionen beziehen sich auf direkte Emissionen aus eigenen oder kontrollierten Quellen. Ein Beispiel sind die Emissionen von Dieselaggregaten. Scope 2-Emissionen beziehen sich auf indirekte Emissionen aus der Erzeugung von gekauftem Strom, d.h. Netzstrom.
** Netto-Null ist in Bezug auf Scope 1, Scope 2 und Scope 3. Scope 1 und Scope 2 sind oben beschrieben. Scope 3 umfasst alle anderen indirekten Emissionen, die in der Wertschöpfungskette eines Unternehmens entstehen. Dazu gehören beispielsweise THG-Emissionen, die in der Lieferkette, durch Geschäftsreisen usw. entstehen.

More information:
Tata Communications Nachhaltigkeit Recycling erneuerbare Energien
Source:

Tata Communications / HARVARD ENGAGE! COMMUNICATIONS GmbH

print close
more
(c) adidas AG
26.04.2023

adidas: 96% of all Polyester used in Products is Recycled Polyester

adidas has announced a new milestone in its journey towards replacing virgin polyester with recycled polyester . 96% of all polyester used in adidas products is now recycled polyester. The achievement of the ambition that adidas first set in 2017 – to replace all virgin polyester with recycled wherever possible by the end of 2024 – is on track to be achieved earlier than expected.

Since the first adidas high-performance shoe was made with recycled materials in 2015, the brand has been working towards reducing its dependency on virgin polyester. Last year it announced that in 2021, more than 90% of the polyester used in adidas products was recycled, which – if it had been virgin polyester - would have accounted for 390 thousand metric tons of CO2e – the equivalent to the greenhouse gas emissions generated to provide power to 50 thousand homes in the US[1].

According to Textile Exchange[2], global recycled polyester fiber production volume increased in 2021, but still accounts for just 14.8% of all global polyester production.

adidas has announced a new milestone in its journey towards replacing virgin polyester with recycled polyester . 96% of all polyester used in adidas products is now recycled polyester. The achievement of the ambition that adidas first set in 2017 – to replace all virgin polyester with recycled wherever possible by the end of 2024 – is on track to be achieved earlier than expected.

Since the first adidas high-performance shoe was made with recycled materials in 2015, the brand has been working towards reducing its dependency on virgin polyester. Last year it announced that in 2021, more than 90% of the polyester used in adidas products was recycled, which – if it had been virgin polyester - would have accounted for 390 thousand metric tons of CO2e – the equivalent to the greenhouse gas emissions generated to provide power to 50 thousand homes in the US[1].

According to Textile Exchange[2], global recycled polyester fiber production volume increased in 2021, but still accounts for just 14.8% of all global polyester production.

Sport is about meeting challenges head-on and finding ways to overcome those – material innovation is no different. For the team at adidas, the road to 96% has been long and full of challenges. The confirmation of its polyester commitment in 2017 was a crucial step in helping to initiate a transformation across adidas and its entire supply chain. This transformation has been made possible through creating technical solutions and imagining new possibilities that previously didn’t exist.

To accompany the announcement, adidas has created a short film about its new ‘PB’, featuring star athlete Jazmin Sawyers. The film highlights the sports brand’s pride in making progress, and its determination to push further.

As the brand looks ahead to 2024 and beyond, it will continue to expand its focus beyond recycled polyester. It will be doing this through three main areas of focus: changing materials by testing and scaling new raw materials, rethinking entire processes to design products that have a circular end-of-life solution, and reducing its carbon footprint.

[1] adidas Footprint Analytics team
[2] Textile Exchange Preferred Fiber & Materials Market Report, October 2021, https://textileexchange.org/app/uploads/2022/10/Textile-Exchange_PFMR_2022.pdf

More information:
adidas polyester Sustainability Recycling Sportswear
Source:

adidas AG

print close
more
26.04.2023

Ben Noteboom appointed as member of AkzoNobel’s Supervisory Board

AkzoNobel shareholders voted in favor of all resolutions at the company’s Annual General Meeting (AGM).
 
As well as adopting the company's 2022 financial statements, the dividend policy and total dividend per share of €1.98 for 2022 were also agreed. In addition, Mr. Ben Noteboom was appointed by the AGM as a new member of the company’s Supervisory Board. The intention is to elect Mr. Noteboom as Chair of AkzoNobel’s Supervisory Board as of May 25, 2023, when he will resign as member of the Supervisory Board of Aegon N.V.
 
Mr. Byron Grote, Deputy Chair of AkzoNobel’s Supervisory Board, commented: “We’re very pleased with the appointment of Ben Noteboom. His strong track record in executive and non-executive roles, and his broad experience in different industries – including the chemical industry – will be valuable additions to AkzoNobel. We wish him every success in his new role.”
 
Mr. Noteboom will succeed Mr. Nils Smedegaard Andersen, who has served as a member and Chair of the Supervisory Board since 2018.

Mrs. Jolanda Poots-Bijl and Mr. Dick Sluimers were both reappointed as member of the Supervisory Board.

AkzoNobel shareholders voted in favor of all resolutions at the company’s Annual General Meeting (AGM).
 
As well as adopting the company's 2022 financial statements, the dividend policy and total dividend per share of €1.98 for 2022 were also agreed. In addition, Mr. Ben Noteboom was appointed by the AGM as a new member of the company’s Supervisory Board. The intention is to elect Mr. Noteboom as Chair of AkzoNobel’s Supervisory Board as of May 25, 2023, when he will resign as member of the Supervisory Board of Aegon N.V.
 
Mr. Byron Grote, Deputy Chair of AkzoNobel’s Supervisory Board, commented: “We’re very pleased with the appointment of Ben Noteboom. His strong track record in executive and non-executive roles, and his broad experience in different industries – including the chemical industry – will be valuable additions to AkzoNobel. We wish him every success in his new role.”
 
Mr. Noteboom will succeed Mr. Nils Smedegaard Andersen, who has served as a member and Chair of the Supervisory Board since 2018.

Mrs. Jolanda Poots-Bijl and Mr. Dick Sluimers were both reappointed as member of the Supervisory Board.

More information:
AkzoNobel Coatings general meeting Supervisory Board
Source:

AkzoNobel

print close
more
(c) INDEX™ | Palexpo SA
26.04.2023

INDEX™23 concludes successfully with over 610 exhibitors

The international nonwovens community came together once again in Geneva this week for INDEX™23, with with 12,017 attendees from over 100 countries and 610 exhibitors from 43 countries joining the event.

Exhibitors made the most of the four intensive days to meet potential new customers and extend business with existing clients. As one of the world’s leading nonwovens exhibitions, INDEX™ demonstrated the latest breakthroughs and innovative developments across all nonwovens’ applications.

The INDEX™ Lab, an exchange hub displaying samples from innovations and new developments, also showcased the winners and runners up from each of the five categories of the INDEX™ Innovation Award. Open to any EDANA member company or exhibitor at INDEX™23, the winners were announced on the first day of the exhibition during a dedicated ceremony at the EDANA stand.

The winners (more infomation):

The international nonwovens community came together once again in Geneva this week for INDEX™23, with with 12,017 attendees from over 100 countries and 610 exhibitors from 43 countries joining the event.

Exhibitors made the most of the four intensive days to meet potential new customers and extend business with existing clients. As one of the world’s leading nonwovens exhibitions, INDEX™ demonstrated the latest breakthroughs and innovative developments across all nonwovens’ applications.

The INDEX™ Lab, an exchange hub displaying samples from innovations and new developments, also showcased the winners and runners up from each of the five categories of the INDEX™ Innovation Award. Open to any EDANA member company or exhibitor at INDEX™23, the winners were announced on the first day of the exhibition during a dedicated ceremony at the EDANA stand.

The winners (more infomation):

  1. Nonwoven roll goods
    Winner: Suominen – HYDRASPUN® Circula Nonwoven
  2. Finished products made from, or incorporating nonwovens
    Winner: Henkel – Smart Adult Care
  3. Raw materials or components (e.g., fibre, binder, polymer, tape), of special relevance to the nonwovens industry and related converted products
    Winner: Fiberpartner – BicoBio
  4. Innovation in machinery of special relevance to the nonwovens industry
    Winner: Curt G. Joa, Inc. – ESC-8™
  5. Sustainable Product
    Winner: Sparkle Innovations – SugaFluff™

The "Nonwovens Journey", an immersive experience that takes a look at the innovative role of nonwovens, as well as how innovation has progressed in time around both sustainability, and how nonwovens are used in everyday life, also allowed visitors to discover the versatility of nonwovens.

Running alongside the exhibition itself, there was also a full programme of side events that were enjoyed by participants: Exhibitor Product Presentations from 33 exhibitors; a series of informative seminars covering a myriad of topics including medical nonwovens, sustainability, circular economy, geosynthetics, textiles, mobility, fair trade, gender equity, innovation, and market trends; country-specific briefings offering insights into the nonwovens market in various regions around the world; and a nonwovens tutorial intended as an induction to nonwovens for those new to the industry. These topics were all presented by leading industry experts and guest speakers, including among others, the World Trade Organization (WTO).

Concern for the environment has in recent years become increasingly important, and once again remained a key topic at INDEX™23, with companies pushing to achieve further CO2 reductions and circularity across the supply chain.

Continuing on from its success during COVID-19, the INDEX™23 Mobile App and Virtual Platform was back. This tool offered participants – both in Geneva and those following from home – the chance to watch presentations live and interact with speakers, exhibitors, and other participants. Attendees were able to plan their visit and organize meetings, which was highly appreciated. Video recordings from the sessions will remain available online in the app and platform for the coming weeks.

The next INDEX™ will take place in three years from 21-24 April 2026.

More information:
INDEX nonwovens INDEX™ Innovation Award Innovation award
Source:

INDEX™ | Palexpo SA

print close
more
(c) Remei AG
26.04.2023

Remei feiert 40-jähriges Jubiläum mit Kampagne

Remei, ein Spezialist für eine integrierte Wertschöpfungskette von der Faser bis zum fertigen Textil, feiert sein 40-jähriges Bestehen mit einer umfassenden Kampagne. Im Fokus steht die innovative und systemverändernde Lösung von Remei für rückverfolgbare Textilien aus Bio-Baumwolle. Mit der Kampagne unterstreicht Remei sein Engagement für eine verantwortungsvolle Produktion von Textilien.

Remei wurde in den 1983 als konventionelles Garnhandelsunternehmen gegründet. Bereits im darauffolgenden Jahrzehnt wurden die Bio-Baumwollbetriebe in Indien und Tansania aufgebaut, was den Beginn der direkten und partizipativen Zusammenarbeit mit den lokalen Bio-Baumwollbäuer*innen nach den Grundsätzen des fairen Handels markiert. Seit 2008 handelt Remei ausschließlich mit Produkten aus Bio-Baumwolle und schon seit 2013 sind mit der Einführung eines digitalen Tracking Tools alle Textilien aus der Lieferkette von Remei bis zum Ursprung rückverfolgbar.

Remei, ein Spezialist für eine integrierte Wertschöpfungskette von der Faser bis zum fertigen Textil, feiert sein 40-jähriges Bestehen mit einer umfassenden Kampagne. Im Fokus steht die innovative und systemverändernde Lösung von Remei für rückverfolgbare Textilien aus Bio-Baumwolle. Mit der Kampagne unterstreicht Remei sein Engagement für eine verantwortungsvolle Produktion von Textilien.

Remei wurde in den 1983 als konventionelles Garnhandelsunternehmen gegründet. Bereits im darauffolgenden Jahrzehnt wurden die Bio-Baumwollbetriebe in Indien und Tansania aufgebaut, was den Beginn der direkten und partizipativen Zusammenarbeit mit den lokalen Bio-Baumwollbäuer*innen nach den Grundsätzen des fairen Handels markiert. Seit 2008 handelt Remei ausschließlich mit Produkten aus Bio-Baumwolle und schon seit 2013 sind mit der Einführung eines digitalen Tracking Tools alle Textilien aus der Lieferkette von Remei bis zum Ursprung rückverfolgbar.

Heute arbeiten Remei und ihre Tochterunternehmen mit 5.000 unabhängigen Kleinbäuer*innen zusammen, um den Rohstoff Baumwolle zu sichern. Das Textilshandelsunternehmen produziert rund 1 Million rückverfolgbare Bio-Baumwolltextilien in einer vollständig transparenten Lieferkette mit 29 verlässlichen Produktionspartnern vom Saatgut bis zum fertigen Textil für mehr als 20 internationale Retailer und Marken.

Dabei verfolgt Remei einen besonderen Ansatz. «Wir integrieren die Bäuerinnen und Bauern in die Lieferkette und setzen nicht auf Shareholder-, sondern auf All-Holder-Value – in dem wir alle Akteur*innen in die Wertschöpfung einbeziehen», sagt Co-CEO Simon Hohmann.

Mit dem Jubiläum feiert Remei nicht nur die 40-jährige Geschichte, die Partnerschaften mit dem Handel und der kompletten Lieferkette sowie die daraus resultierende Plattform für nachhaltige Innovationen, sondern vor allem eine Lösung für rückverfolgbare Bio-Baumwolltextilien, die das Unternehmen heute auf den Markt bringt. «Wir sind überzeugt, dass es immer entscheidender sein wird, die richtigen Allianzen zu finden, um relevante Lösungen für die Zukunft zu entwickeln», so Co-Geschäftsführerin Marion Röttges.

More information:
Remei Jubiläum Baumwolle Bio-Baumwolle Nachhaltigkeit
Source:

Remei AG

print close
more
(c) Hypetex
26.04.2023

Hypetex: Coloured Carbon Fibre Bike Wheels launched at The Cycle Show

The first set of coloured carbon fibre bike wheels made a debut public appearance at The Cycle Show at Alexandra Palace.

Developed in partnership with leading wheel brand Parcours, the Chrono carbon fibre wheels feature a gold finish made of Hypetex’s Zlatan uni-directional material and offer a lighter and higher-performance product than the traditional painted alternative.

Hypetex is a sustainable colouring technology for advanced materials, such as carbon fibre. Born out of Formula 1 racing, its patented paint-replacing process is a key step in advancing the lightweight revolution. Combining water-based eco-resins with a sustainable curing process, Hypetex materials are made with bold, colourful aesthetics as well as technical and cost-saving benefits.

Parcours is a leading wheel brand that offers high-performance, premium wheelsets that employs the latest advancements in aerodynamic technology. The Parcours X Hypetex gold wheels were featured at The Cycle Show in London on a bespoke Handsling A1R0evo, which was nominated for the Jaw Droppers trophy - a competition for the industry’s most striking designs.

The first set of coloured carbon fibre bike wheels made a debut public appearance at The Cycle Show at Alexandra Palace.

Developed in partnership with leading wheel brand Parcours, the Chrono carbon fibre wheels feature a gold finish made of Hypetex’s Zlatan uni-directional material and offer a lighter and higher-performance product than the traditional painted alternative.

Hypetex is a sustainable colouring technology for advanced materials, such as carbon fibre. Born out of Formula 1 racing, its patented paint-replacing process is a key step in advancing the lightweight revolution. Combining water-based eco-resins with a sustainable curing process, Hypetex materials are made with bold, colourful aesthetics as well as technical and cost-saving benefits.

Parcours is a leading wheel brand that offers high-performance, premium wheelsets that employs the latest advancements in aerodynamic technology. The Parcours X Hypetex gold wheels were featured at The Cycle Show in London on a bespoke Handsling A1R0evo, which was nominated for the Jaw Droppers trophy - a competition for the industry’s most striking designs.

More information:
HYPETEX® carbon fibers textile colour
Source:

Hypetex

print close
more
Photo: ANDRITZ
26.04.2023

ANDRITZ: High-speed hygiene converting lines to Predo, Türkiye

International technology group ANDRITZ has received an order from Predo Health Products Inc, Türkiye, for delivery of two high-speed hygiene converting lines to produce adult open diapers and feminine sanitary napkins. With this investment, Predo is entering the growing adult and femcare market. The company already operates four baby diaper lines from ANDRITZ.

The two state-of-the-art lines are designed for high-speed production and contain the most advanced forming technology for absorbent core and SAP (superabsorbent polymers) dosing. Based on their flexibility and user-friendly configuration, Predo will be able to produce a wide range of different product compositions and sizes. In addition, the lines are designed for zero waste production. This will enable Predo to produce high-performing products with a sustainable approach.

The lines will be installed in Predo’s factory in Gaziantep, with start-up scheduled for the first half of 2024.

Predo is one of the leading manufacturers of baby care products and is expanding its business to other hygiene sectors. The company exports to 55 countries across the globe.

International technology group ANDRITZ has received an order from Predo Health Products Inc, Türkiye, for delivery of two high-speed hygiene converting lines to produce adult open diapers and feminine sanitary napkins. With this investment, Predo is entering the growing adult and femcare market. The company already operates four baby diaper lines from ANDRITZ.

The two state-of-the-art lines are designed for high-speed production and contain the most advanced forming technology for absorbent core and SAP (superabsorbent polymers) dosing. Based on their flexibility and user-friendly configuration, Predo will be able to produce a wide range of different product compositions and sizes. In addition, the lines are designed for zero waste production. This will enable Predo to produce high-performing products with a sustainable approach.

The lines will be installed in Predo’s factory in Gaziantep, with start-up scheduled for the first half of 2024.

Predo is one of the leading manufacturers of baby care products and is expanding its business to other hygiene sectors. The company exports to 55 countries across the globe.

More information:
Andritz Predo Turkey Hygiene polymers
Source:

ANDRITZ AG

print close
more
(c) CWS International GmbH
21.04.2023

CWS digitalisiert den Waschraum

Als Anbieter von Waschraumlösungen arbeitet CWS an der Entwicklung des Waschraums der Zukunft. Die neueste Innovation: eine IoT-basierte Lösung für die Waschraumserie PureLine, die die Wartung von Waschräumen effizienter macht und somit für höheren Komfort und Hygiene sorgt – sowohl bei Anwendern als auch bei Waschraumbetreibern.

Die neue IoT-Lösung namens smartMate ermöglicht es Gebäudebetreibenden, Waschräume mit PureLine-Spendern in Echtzeit zu überwachen und zu warten. Über das Webportal von smartMate erhalten Kunden Informationen und Datenanalysen, die ihnen helfen, Stoßzeiten vorauszusehen und leere Spender zu vermeiden. Eine Standortanzeige der betroffenen Spender hilft ihnen dabei, den entsprechenden Waschraum gezielt aufsuchen zu können.

Als Anbieter von Waschraumlösungen arbeitet CWS an der Entwicklung des Waschraums der Zukunft. Die neueste Innovation: eine IoT-basierte Lösung für die Waschraumserie PureLine, die die Wartung von Waschräumen effizienter macht und somit für höheren Komfort und Hygiene sorgt – sowohl bei Anwendern als auch bei Waschraumbetreibern.

Die neue IoT-Lösung namens smartMate ermöglicht es Gebäudebetreibenden, Waschräume mit PureLine-Spendern in Echtzeit zu überwachen und zu warten. Über das Webportal von smartMate erhalten Kunden Informationen und Datenanalysen, die ihnen helfen, Stoßzeiten vorauszusehen und leere Spender zu vermeiden. Eine Standortanzeige der betroffenen Spender hilft ihnen dabei, den entsprechenden Waschraum gezielt aufsuchen zu können.

Mit der smartMate-App können Kunden auch unterwegs auf die Echtzeit-Informationen zugreifen. Dazu gehören Batteriestatus, Verbrauchsmaterialstatus und Online-Status. Das entsprechende Webportal ermöglicht auch eine umfassende Datenanalyse. Anhand Statistiken, wie der Gesamtzahl der ausgegebenen Portionen und der Anzahl der Nachfüllungen, erkennt smartMate Spitzenzeiten und demonstriert diese im benutzerfreundlichen Dashboard. Dies führt zu einer schnelleren Reaktionszeit bei der Planung und einer besseren Bestandsverwaltung.

Die smartMate-Lösung von CWS basiert auf neuester IoT-Technologie (= Internet of Things, zu Deutsch „Internet der Dinge“), mit der physische Objekte wie Seifenspender, Handtuchspender und Toilettenpapierhalter mit Sensoren und Software über das Internet verbunden werden. Auf diese Weise können Daten mit anderen Geräten und Systemen ausgetauscht werden. Für die CWS PureLine bedeutet die Ausstattung mit IoT-Lösungen, dass die Effizienz und die Hygiene der Waschräume verbessert und letztendlich das Erlebnis der Nutzenden optimiert wird.

Die Kunden können die Verbrauchsmaterialien auffüllen, kurz bevor sie aufgebraucht sind, und vermeiden so unnötigen Abfall. In der Nachhaltigkeitsoptimierung ist smartMate also eine wichtige Stütze, um die Verschwendung von Verbrauchsmaterialien zu reduzieren, indem der Verbrauch überwacht und die Nachfüllpläne optimiert werden. Zudem können die Abgabemengen der Spender so angepasst werden, dass mehr Nutzungen pro Füllung möglich sind.

More information:
CWS CWS International GmbH Handtuch Digitalisierung
Source:

CWS International GmbH

print close
more
21.04.2023

DyStar announces Restructuring Plan for Ludwigshafen Plant Facility

DyStar announces the plan to restructure its Ludwigshafen facility located in Germany. The strategic decision is made by the company in response to changing business conditions and market shifts.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “This is an important strategic move for DyStar. We will focus on developing key emerging markets, which have been shifting over a decade. In the wake of higher energy costs and inflation, DyStar is determined to further improve cost efficiency and drive sustainable productivity as we continue to deliver the highest quality of innovative products that support the global supply chain.”

Mr. Eric Hopmann, Chief Commercial Officer of DyStar Group said, “The restructuring of this facility will be carried out in a phased manner. DyStar will diversify the production activity out of Europe and start with the reduction of manpower as a consequence. DyStar’s customers can be further assured of undisrupted supply, hence their production should not be affected as we will work closely to meet their specific requirements.”

DyStar announces the plan to restructure its Ludwigshafen facility located in Germany. The strategic decision is made by the company in response to changing business conditions and market shifts.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “This is an important strategic move for DyStar. We will focus on developing key emerging markets, which have been shifting over a decade. In the wake of higher energy costs and inflation, DyStar is determined to further improve cost efficiency and drive sustainable productivity as we continue to deliver the highest quality of innovative products that support the global supply chain.”

Mr. Eric Hopmann, Chief Commercial Officer of DyStar Group said, “The restructuring of this facility will be carried out in a phased manner. DyStar will diversify the production activity out of Europe and start with the reduction of manpower as a consequence. DyStar’s customers can be further assured of undisrupted supply, hence their production should not be affected as we will work closely to meet their specific requirements.”

The facility has been an integral part of DyStar’s global network. DyStar inherited this facility from their founders who started the Indigo research and manufacturing more than 125 years ago.

More information:
DyStar specialty chemicals company specialty chemicals
Source:

DyStar

print close
more
21.04.2023

REVECOL® by ERCA: Textile chemical auxiliaries obtained from vegetable oils

REVECOL® (Recycled Vegetable Cooking Oil) represents a new generation of textile chemical auxiliaries, which are high-performing and obtained from vegetable exhausted cooking oil.

Chemical auxiliaries play a crucial role in several stages of the textile production cycle, from material preparation to dyeing and finishing, but represent a complex challenge from the point of view of reducing environmental impact. Herein lies the revolutionary aspect of REVECOL® by ERCA: for the first time, not just one product, but a complete range of auxiliary chemicals is available that meets the criteria of circularity.

The result of ERCA's continuous research, REVECOL® are in fact born from critical waste materials (exhausted vegetable oils), which, thanks to an environmentally and safety-friendly manufacturing process, are transformed into a line of innovative chemical auxiliaries destined for the entire textile industry and its various applications: from underwear to home textiles.

REVECOL® (Recycled Vegetable Cooking Oil) represents a new generation of textile chemical auxiliaries, which are high-performing and obtained from vegetable exhausted cooking oil.

Chemical auxiliaries play a crucial role in several stages of the textile production cycle, from material preparation to dyeing and finishing, but represent a complex challenge from the point of view of reducing environmental impact. Herein lies the revolutionary aspect of REVECOL® by ERCA: for the first time, not just one product, but a complete range of auxiliary chemicals is available that meets the criteria of circularity.

The result of ERCA's continuous research, REVECOL® are in fact born from critical waste materials (exhausted vegetable oils), which, thanks to an environmentally and safety-friendly manufacturing process, are transformed into a line of innovative chemical auxiliaries destined for the entire textile industry and its various applications: from underwear to home textiles.

EVECOL® by ERCA has obtained several certifications – GRS, RCS, listed into ZDHC Chemical Gateway, bluesign® and GOTS, and are also finalizing the third-party certified PCF (Product Carbon Footprint), - as well as various international recognitions – first prize RESPONSIBLE CARE®, in Italy, from Federchimica, inclusion in the BAT (Best Available Techniques) document from the European Community.

More information:
REVECOL® ERCA textile chemical auxiliaries Textile Chemicals chemical auxiliaries
Source:

ERCA S.p.A

print close
more
(c) adidas AG
21.04.2023

adidas TERREX and National Geographic launch hiking collection

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

The 51-piece collection includes women’s, men’s, and gender-neutral offerings – all built to equip the wearer in multi-terrain environments:

  • A part of the collection is the RAIN.RDY Jacket; a 2.5L waterproof and seam-sealed outer garment built to facilitate epic adventures. The men’s jacket features a bold print of the shell formations in the Porsanger Peninsula, Norway, while the women’s is inspired by stills of White Sands National Park in New Mexico.
  • A long sleeve shirt is finished with the bold National Geographic yellow icon and reflective details.
  • The TERREX Swift R3 GORE-TEX Hiking shoes offer the peak combination of a lightweight construction and cushioning as seen in trail running shoes with the stability of a hiking boot. Finished in a print inspired by a stunning aerial shot of Earth, the hiking shoes come with a GORE-TEX lining and membrane seal so water is kept out, and a Continental™ Rubber outsole for optimal grip in wet or dry conditions.
  • The WIND.RDY: GET SHELTERED Jacket, with wind-resistant technology and a water repellent ripstop fabric, allows explorers to feel protected and confident in many weather conditions. The men’s and women’s versions come with bold prints inspired by photography including that of sandstone and snow at Comb Ridge, Utah. Smart design features including a bungee-cord enabled adjustable hem, a lightweight fabric and reflective details. Additionally, it features a bold new lenticular logo design that alternates between Terrex and National Geographic from different perspectives – and is made in part with recycled materials.
More information:
adidas Outdoor outdoor apparel
Source:

adidas AG

print close
more
(c) Freudenberg Performance Materials Holding GmbH
21.04.2023

Freudenberg launches biodegradable fusible cotton shirt interlining range

Freudenberg Performance Materials Apparel (Freudenberg) launches its biodegradable fusible cotton shirt interlinings range 46xx. With this innovation, the world’s leading specialist in woven, knitted, weft and nonwoven interlinings reduces its impact on the environment and supports customers in achieving their own sustainability objectives. In Asia, the series is marketed under the name 42xx series.

Approved biodegradability and non-toxicity by Hohenstein Laboratories
The new Freudenberg fusible interlinings for shirts and blouses have been developed in such a way that they are harmless to people and the environment at the end of their life cycle. Germany’s independent Hohenstein Laboratories performed biodegradation tests on the 46xx series, based on the Hohenstein method which draws on DIN EN ISO 11721-2:2003 and EN ISO 846, and approved it as biodegradable and ecotoxicologically harmless. The tests by Hohenstein showed no negative effects on either the germination of garden cress nor on earthworms in the acute toxicity test.

Freudenberg Performance Materials Apparel (Freudenberg) launches its biodegradable fusible cotton shirt interlinings range 46xx. With this innovation, the world’s leading specialist in woven, knitted, weft and nonwoven interlinings reduces its impact on the environment and supports customers in achieving their own sustainability objectives. In Asia, the series is marketed under the name 42xx series.

Approved biodegradability and non-toxicity by Hohenstein Laboratories
The new Freudenberg fusible interlinings for shirts and blouses have been developed in such a way that they are harmless to people and the environment at the end of their life cycle. Germany’s independent Hohenstein Laboratories performed biodegradation tests on the 46xx series, based on the Hohenstein method which draws on DIN EN ISO 11721-2:2003 and EN ISO 846, and approved it as biodegradable and ecotoxicologically harmless. The tests by Hohenstein showed no negative effects on either the germination of garden cress nor on earthworms in the acute toxicity test.

Energy-saving interlining
The new biodegradable shirt interlinings also show great potential for energy saving, as the fusing can be performed at a low temperature. Concretely, this means that the resulting temperature between the upper fabric and the shirt interlining during fusing is only 127°C which is significantly lower than the commonly used temperature of 143°C. Certified to OEKO-TEX® STANDARD 100 Class II for successfully testing for no harmful substances, the shirt interlinings are washable at up to 40°C and resistant to dry cleaning. In addition, it has also passed all ecological-toxicological tests and is a perfect end-of-life cycle solution.

Product details and availability
The products in range 46xx are available in Europe in the color white and the following weight classes: 4605 (90g/m2), 4616 (150g/m2) and 4618 (55g/m2). The adhesive of the interlinings consists of a 100% degradable bio-polymer. The shirt interlinings are ideal for reinforcing shirt and blouse collars, cuffs and plackets used in fashion, leisure and business clothing. The biodegradable, non-toxic interlinings are particularly important for labels with an ecologically sustainable claim.

More information:
Freudenberg Freudenberg Performance Materials Apparel Sustainability interlinings cotton Shirt blouse
Source:

Freudenberg Performance Materials Holding GmbH

print close
more
21.04.2023

Rieter: Annual General Meeting 2023

Shareholders Adopt All Motions Proposed by the Board of Directors

  • Distribution of a dividend of CHF 1.50 per share approved
  • Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
  • All members of the Board of Directors who stood for re-election were elected
  • Thomas Oetterli newly appointed to the Board of Directors
  • KPMG newly elected as statutory auditors
  • Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Shareholders Adopt All Motions Proposed by the Board of Directors

  • Distribution of a dividend of CHF 1.50 per share approved
  • Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
  • All members of the Board of Directors who stood for re-election were elected
  • Thomas Oetterli newly appointed to the Board of Directors
  • KPMG newly elected as statutory auditors
  • Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Annual Report, Financial Statements, Consolidated Financial Statements and Remuneration Report
The shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, financial and consolidated financial statements for 2022. Moreover, they formally approved the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

By way of a consultative vote, the shareholders also approved the Remuneration Report 2022.

Remuneration of the Members of the Board of Directors and the Group Executive Committee
In two separate binding votes, the proposed maximum total remuneration of the members of the Board of Directors and the Group Executive Committee for the 2024 financial year was approved.

Re-Election of the Members of the Board of Directors
The Chairman of the Board, Bernhard Jucker, and the Directors, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi, Sarah Kreienbühl and Daniel Grieder were confirmed for a further one-year term of office. In addition, Thomas Oetterli was newly elected to the Board of Directors for a term of office.

The members of the Remuneration Committee who were standing for election –
Hans-Peter Schwald, Bernhard Jucker and Sarah Kreienbühl – were likewise re-elected for a one-year term of office.

Election of KPMG as Statutory Auditors
The shareholders also adopted the proposal of the Board of Directors to elect KPMG AG, Zurich, as new statutory auditors for the financial year beginning January 1, 2023.

Amendments to the Articles of Association
The shareholders further approved the proposals of the Board of Directors to amend the Articles of Association of Rieter Holding Ltd., in order to implement the requirements of the reform of the Swiss company law, which came into force on January 1, 2023.

More information:
Rieter Rieter Holding Ltd. general meeting
Source:

Rieter Holding Ltd.

print close
more
(c) Freudenberg Performance Materials
19.04.2023

Freudenberg: Launch of sustainable carpet backings

Freudenberg Performance Materials (Freudenberg) announces the launch of sustainable carpet backing products for the flooring industry. Sustainable backings support customers in their transition towards producing more sustainable carpets. The range is introduced as Colback ECO and Lutradur ECO and is part of the Freudenberg portfolio of high-performance spunbond nonwoven technical textiles.

Freudenberg Performance Materials (Freudenberg) announces the launch of sustainable carpet backing products for the flooring industry. Sustainable backings support customers in their transition towards producing more sustainable carpets. The range is introduced as Colback ECO and Lutradur ECO and is part of the Freudenberg portfolio of high-performance spunbond nonwoven technical textiles.

Reduced CO2 footprint
Freudenberg follows a ‘less is more’ principle: the best raw materials are the materials that are not needed at all. For the ECO product range, Freudenberg R&D teams developed a solution to save raw materials in their carpet backings. Freudenberg redefined its proprietary yarn production technology allowing for extremely thin filaments with a diameter up to 30% smaller than the standard portfolio for carpet backings.  
The new thin yarn technology is one of Freudenberg’s sustainable initiatives benefitting the carpet industry. Other developments supporting sustainability include backings with a high recycled content and backings using alternative approaches to facilitate carpet recyclability. They will extend the ECO portfolio in the future.

ECO-CHECK-Label
The currently launched thin yarn ECO-backings have been awarded the ECO-CHECK label. Freudenberg introduced this label in early 2021 to identify particularly sustainable products within its portfolio.

More information:
Freudenberg Performance Materials Freudenberg Carpets Sustainability
Source:

Freudenberg Performance Materials

print close
more
(c) PrimaLoft
19.04.2023

PrimaLoft® Insulation with Ocean Bound Plastic aus gesammeltem Plastik

PrimaLoft, Inc., ein Unternehmen für Materialtechnologie, macht mit der Einführung von PrimaLoft® Insulation with Ocean Bound Plastic einen weiteren wichtigen Schritt in seiner Relentlessly Responsible™ Mission. Die Innovation verwendet Plastik, das in Küstennähe gesammelt wird, um Hochleistungsisolationsfasern herzustellen. So wird verhindert, dass weiterer Plastikmüll ins Meer gelangt. Helly Hansen und Isbjörn of Sweden sind die ersten Marken, welche die neue Isolation in ihren Herbst/Winter 2023 Kollektionen verwenden.

PrimaLoft® Insulation with Ocean Bound Plastic ist eine leistungsstarke Isolation, die zu 100 Prozent aus recyceltem Material besteht, wovon 60 Prozent aus Plastikflaschen stammen, die in einem Umkreis von 50 Kilometern um Küstengebiete gesammelt wurden. Da das Plastik noch vor dem Erreichen des Meers abgefangen wird, kann es zur Verarbeitung der hochwertigen PrimaLoft-Isolation genutzt werden. Gleichzeitig wird verhindert, dass die Weltmeere weiter verschmutzt werden.

PrimaLoft, Inc., ein Unternehmen für Materialtechnologie, macht mit der Einführung von PrimaLoft® Insulation with Ocean Bound Plastic einen weiteren wichtigen Schritt in seiner Relentlessly Responsible™ Mission. Die Innovation verwendet Plastik, das in Küstennähe gesammelt wird, um Hochleistungsisolationsfasern herzustellen. So wird verhindert, dass weiterer Plastikmüll ins Meer gelangt. Helly Hansen und Isbjörn of Sweden sind die ersten Marken, welche die neue Isolation in ihren Herbst/Winter 2023 Kollektionen verwenden.

PrimaLoft® Insulation with Ocean Bound Plastic ist eine leistungsstarke Isolation, die zu 100 Prozent aus recyceltem Material besteht, wovon 60 Prozent aus Plastikflaschen stammen, die in einem Umkreis von 50 Kilometern um Küstengebiete gesammelt wurden. Da das Plastik noch vor dem Erreichen des Meers abgefangen wird, kann es zur Verarbeitung der hochwertigen PrimaLoft-Isolation genutzt werden. Gleichzeitig wird verhindert, dass die Weltmeere weiter verschmutzt werden.

Das Verfahren ist von OceanCycle zertifiziert, einem sozialen Unternehmen, das sich darauf fokussiert, die Verschmutzung der Ozeane durch Plastik zu verhindern und die Lebensbedingungen in Küstengemeinden durch Zertifizierung und direkte soziale Maßnahmen zu verbessern. Die unabhängige OceanCycle-Zertifizierung stellt sicher, dass das Material auch wirklich aus Küstennähe stammt, die Beschaffung ethisch-korrekt und die Rückverfolgbarkeit lückenlose ist. Zudem gewährleistet sie eine lückenlose Dokumentation von der Sammlung bis zur Herstellung.

Umwandlung von Ocean Bound Plastik in PrimaLoft-Material
Die Relentlessly Responsible™ Mission von PrimaLoft hat zum Ziel, durch Innovation sowohl Leistung als auch Nachhaltigkeit seiner Produkte immer weiter zu steigern. „Unsere neueste Entwicklung ist eine wichtige Lösung sowohl für die Umwelt, als auch für die Recycling-Lieferkette“, sagt Tara Maurer-Mackay, Senior Vice President, Product Strategy. „Die Qualität von Kunststoffen verschlechtert sich schnell, sobald sie den Elementen im Meerwasser länger ausgesetzt sind, was sie für die meisten Recyclingmaßnahmen unbrauchbar macht. Indem wir Kunststoffabfälle auffangen, bevor sie ins Meer gelangen können, sind wir in der Lage, das Material zur Herstellung unserer hochwertigen Produkten zu verwenden, und damit unseren Markenpartnern und Verbrauchern eine perfekte Mischung aus Leistung und Vielseitigkeit bei geringerer Umweltbelastung zu bieten." PrimaLoft® Insulation with Ocean Bound Plastic besitzt alle Leistungsvorteile, für die PrimaLoft bekannt ist, darunter leichtgewichtige Wärmeleistung sowohl bei trockenen als auch bei nassen Bedingungen, praktische Packbarkeit und lange Haltbarkeit.

More information:
PrimaLoft PrimaLoft, Umwelt, Nachhaltigkeit Plastikmüll Recycling
Source:

PrimaLoft

print close
more