From the Sector

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

Messe Frankfurt India has announced new dates for the Mumbai edition of Screen Print India - the leading trade fair for screen, textile, sublimation and digital printing technologies The exhibition will be held in parallel with Gartex Texprocess India, from 19 – 21 March 2021 at the Bombay Exhibition Centre in Mumbai. With the gradual re-opening of commercial activities and businesses, the co-located fairs will enable the industry to channel their efforts back towards business development and cater to the needs of screen printing, textile and garment manufacturing industry players as it gears up to bring the production and manufacturing value chain under one roof.
 
While the focus segments under Gartex Texprocess India will draw attention to innovations in garmenting & apparel machinery, the product launches and live demos at Screen Print India will enable business visitors and traders to track technological advances in digital textile and screen-printing technologies. The secure, business-focused ambience will enable both printing and textile sector players to showcase, source and strengthen their supply chains and keep pace with the shifting demand for screen printing, textile printing, digital and sublimation technologies across other sectors.
 
Screen Print India will also host a series of sessions on processes and innovations related to the graphics industry. Another key highlight of this successful trade fair is the Screen Print Excellence Awards that upholds a strong tradition of honouring technology inventors and trailblazers within the screen-printing industry. With this in mind, the Mumbai edition will curate a special “SPI Gallery” to showcase award winning pieces of screen-printing excellence.

• Members of TMAS – the Swedish textile machinery association – have adopted a range of new strategies in response to the Covid-19 pandemic, aimed at assisting manufacturers of textiles and apparel to adjust to a new normal, as Europe and other regions emerge cautiously from lockdown.

“Many European companies have been forced into testing new working methods and looking at what it’s possible to do remotely, and how to exploit automation to the full, in order to become more flexible,” says TMAS Secretary General Therese Premler-Andersson. “Others have been taking risks where they see opportunies and there’s a new sense of solidarity among companies.

“It’s extremely encouraging, for example, that over five hundred European companies from across our supply chain are reported to have responded to the shortages of facemasks and PPE – protective personal equipment – by converting parts of their sites or investing in new equipment.”

New supply chains

Amongst them are TMAS members of the ACG Group, who quickly established a dedicated new nonwovens fabric converting and single-use garment making-up plant to supply to the Swedish health authorities. From a standing start in March, this is now producing 1.8 million square metres of converted fabric and turning it into 692,000 finished medical garments each month.

“In 2020 so far, we have seen new value chains being created and a certain amount of permanent reshoring is now inevitable,” says Premler-Andersson. “This is being backed by the new funding announced in the European Union’s Next Generation EU plan, with €750 billion marked for helping industry recover. As the European Commission President Ursula von der Leyen has stressed, “green and digital” transitions hold the key to Europe’s future prosperity and resilience, and TMAS members have new solutions to assist in both areas.”

Remote working

Automated solutions have opened up many possibilities for remote working during the pandemic. Texo AB, for example, the specialist in wide-width weaving looms for the paper industry, was able to successfully complete the build and delivery of a major multi-container order between April and May.

“Our new Remote Guidance software now makes it possible for us to carry out some of the commissioning and troubleshooting of such new lines remotely, which has been helpful” says Texo AB President Anders Svensson.

Svegea of Sweden, which has spent the past few months developing its new CR-210 fabric relaxation machine for knitted fabrics, has also successfully set up and installed a number of machines remotely, which the company has never attempted before.

“The pandemic has definitely led to some inventive solutions for us and with international travel currently not possible, we are finding better methods of digital communication and collaboration all the time,” says Svegea managing director Hakan Steene.

Eric Norling, Vice President of the Precision Application business of Baldwin Technology, believes the pandemic may have a more permanent impact on global travel.

“We have now proven that e-meetings and virtual collaboration tools are effective,” he says. “Baldwin implemented a home office work regime from April with only production personnel and R&D researchers at the workplace. These past few months have shown that we can be just as effective and do not need to travel for physical meetings to the same extent that was previously thought to be necessary.”

Pär Hedman, Sales and Marketing Manager for IRO AB, however, believes such advances can only go so far at the moment.

“Video conferences have taken a big leap forward, especially in development projects, and this method of communication is here to stay, but it will never completely replace personal meetings,” he says. “And textile fabrics need to be touched, examined and accepted by the senses, which is impossible to do via digital media today. The coming haptic internet, however, may well even change that too.”

Social distancing

The many garment factories now equipped with Eton Systems UPS work stations – designed to save considerable costs through automation – have meanwhile benefited from the unintentional social distancing they automatically provide compared to factories with conventional banks of sewing machines.

“These companies have been able to continue operating throughout the pandemic due to the spaced nature of our automated plant configurations,” says Eton Systems Business Development Manager Roger Ryrlén. “The UPS system has been established for some time, but planned spacing has proved an accidental plus for our customers – with improved productivity.”

“Innovations from TMAS member companies have been coming thick and fast recently due to their advanced know-how in automation concepts,” Premler-Andersson concludes.  “If anything, the restrictions imposed by the Covid-19 pandemic have only accelerated these initiatives by obliging our members to take new approaches.”

 The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with digital B2B marketplace, JOOR, there is still a guaranteed trading option.

Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July.  Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.

Perlon®, A Serafin Group company is continuing to produce its’ quality filaments at all five sites for its’ customers in the current challenging climate. Production in China has been operating again as normal since the beginning of March after having to be temporarily halted due to the spreading of COVID-19. Production is now back up to 100%.

Production in Germany at our sites in Munderkingen (Baden-Wuerttemberg), Bobingen (Bavaria) and Wald-Michelbach (Hesse) as well as in the USA is continuing to run without any constraints. Therefore all sites are working to full capacity to fulfill all our customer orders. In particular, in the paper machine clothing area is showing an increase in sales which offsets a reduced demand in other areas such as automotive.

In the current situation, the company is doing everything it can to fulfill its’ responsibility as an employer and also as a business partner. Therefore all hygiene measures at all our sites have been significantly increased so that our employees are protected as well as possible. There is hand sanitizer in every department and all of our production lines are disinfected several times a day. It has been explained to employees, what they should do in the current climate in order to minimize risk. Where possible employees are able to work from home. Perlon® has approximately 650 employees in Germany, over 80 in the USA and more than 100 in China.

High demand for monofilament for the paper industry.

The paper industry is currently experiencing a rise in demand worldwide – and Perlon® is also benefitting from this, as customers need even more high-quality monofilament and twisted yarns for the tensioning of paper machines. For the paper machine clothing field, Perlon® produced filaments are used to manufacture press fabric, which can be used either as a conveyor belt or for moisture removal on a paper production line. Due to the high mechanical strain through the presses, polyamide monofilaments or twisted yarns are therefore almost always used. Paper industry customers have increased their production recently. Whether it’s boxes to cope with the increased demand for online deliveries or paper for hygiene purposes (which everybody can identify with), there is an increased demand worldwide. The dental, hygiene and food preparation fields are also experiencing increased demand. To this end, Perlon® offers filaments for the manufacture of toothbrushes and high-quality cleaning system brushes.

In response to COVID-19, national governments have introduced a series of restrictions to slow the spread of the virus.
Attached is a map showing various constraints implemented by countries across Europe.

Textile innovator and specialty chemical producer Devan answers questions regarding anti-viral textile finish solutions following the growing spread of the COVID-19 outbreak.

Devan studied enveloped viruses (e.g. H1N1, Corona-types etc.) as well as naked viruses (e.g. Rotavirus). For both virus families BI-OME AV showed strong activity in wet state.
In the first instance, the company wants to focus on professionals who need to stay working such as policemen, logistics workers, shop employees, day-care workers.

A common complication of respiratory viral disease can be a secondary bacterial infection. Professionals could be helped with either an anti-bacterial on their facemask to reduce the chance for these secondary bacterial infections, for better hygiene and less odour build-up. On workwear, a combination of a virus spread reducing and antibacterial solution could help as these garments are typically used during long hours, are non-disposable and most likely will be washed at home.