From the Sector

The global antimicrobial market is big business. Demand is strong due to increasing public awareness about contamination and infections, and by consumers’ desire for protective solutions. At Cinte Techtexil China 2018, taking place Sept. 4-6 in Shanghai, SANITIZED (China) Ltd. will be showcasing on Booth D25, Hall N1, its long-lasting Sanitized® Swiss antimicrobial protection for flexible polymer applications.

In recent years, regulatory developments have limited the available types of biocides that can be used to protect polymers and textiles from bacterial and fungal growth. For example, the biocide OBPA was widely used to protect PVC and other plastics from such issues in the past, but the European Union blocked OBPA from sale in January 2013, prompting producers to seek other options. Commonly used alternatives such as DCOIT, BBIT, zinc pyrithione or IBPC have their own limitations, related to their use in various flexible polymer applications.

Outdoor applications in particular have seen an increase in performance requirements –– especially as regards antimicrobial effectiveness after exposure to water and ultraviolet light. Such additives also should not contribute to yellowing after UV exposure, but the available alternatives often fall short in this regard. And antimicrobial additives need to be able to meet the requirements for heat stability during the application process, while also avoiding initial discoloration and demonstrating compatibility with other additives in the formulation.

SANITIZED AG has developed a solution that addresses all these issues. Sanitized® PL 14-32 offers highly effective, long-lasting antimicrobial protection for flexible polymer applications. Besides thermal stability and compatibility with most formulations, Sanitized PL 14-32 provides high UV resistance and no yellowing after UV exposure, as well as good water resistance. It protects the target material against the unwanted effects of microbes such as bacteria, mold, mildew, yeast, pink stain and algae – all of which can destroy material, while also causing unsightly stains, cross contamination, odor development and biofilm formation. The product has been proven to deliver thermal and color stability, and efficient antimicrobial protection in several formulations. Further, it is supported under the EU`s Biocidal Products Regulation (BPR), and the U.S. Environmental Protection Agency has approved its active substances.

California Linen Services of Pasadena, Calif. has been recertified Clean Green, reflecting the company’s dedication to standards for operational efficiency and sustainability. The certification quantifies linen, uniform and facility services’ environmentally friendly performance by confirming an operation launders within TRSA-designated water and energy use thresholds; and verifies use of best management practices (BMPs) in line with the ASTM International environmental laundering standard.
 
California Linen Service’s customers can be assured their reusable healthcare textiles are washed, dried and finished with processes that maximize sustainability and reduce greenhouse emissions. Clean Green certified operations demonstrate significant commitment to conservation and green operations through these BMPs:

• Recovering heat from drained hot water and heat dispersed from the process of warming water
• Recapturing drained water from rinses for reuse
• Using environmentally friendly detergents
• Removing solids and liquids from wastewater
• Solar energy and energy-efficient lighting
• Recycling programs
• Re-routing trucks to save vehicle fuel
• Spill prevention plans

California Linen Service earned the Clean Green certification initially in 2015. The designation is valid for three years at a time. TRSA inspects laundry facilities seeking certification and approves documentation of their water and energy use and BMP deployment through production reports they submit to auditors during the inspections. TRSA’s certification management protocol includes auditor training by the association’s inspection program administrator.
Clean Green aligns with the ASTM International standard, Guide for Sustainable Laundry Practices, which recognizes key criteria for the certification as universal indicators of maximum sustainability in commercial laundry work. ASTM’s review of TRSA BMPs verified these as the most effective and practical techniques for a laundry to achieve green objectives.
TRSA members prompted development of the standard, which was vetted in the sustainability subcommittee of the ASTM Committee on Textiles. Top technical experts, scientists and environmental professionals from outside the linen, uniform and facility services industry reviewed the BMPs. ASTM is the global leader in developing and delivering voluntary consensus standards unparalleled in building consumer confidence in product and service quality.
 
“I applaud California Linen Services for their ongoing sustainability efforts and maintaining the highest standards in their production and delivery operations,” said Joseph Ricci, TRSA president and CEO. “Meeting all the criteria for certification is not easy, but the company is committed to industry-leading processes and technologies.”

Huntsman Corporation (NYSE: HUN) is pleased to announce that the Patent Re-examination Board of the State Intellectual Property Office, China (PRB) upheld Huntsman’s Chinese Patents Nos. ZL00106403.7 and ZL200480003051.4.  These patents were contested by Shaoxing Bangyi Chemical Co., Ltd. and Taixing Jinyun Dyestuff Co., Ltd. By its ruling, the PRB rejected the positions of the petitioners and confirmed that Huntsman’s patented technology, which is used in Huntsman’s NOVACRON® Super Black G and NOVACRON® Super Black R dyes, is Huntsman’s valuable innovation for producing deep black shades.

Huntsman sued Jiangsu Jinji Industrial Co., Ltd. and Taixing Jinyun Dyestuff Co., Ltd. for infringing the above mentioned Chinese Patents at the Beijing Intellectual Property Court by using Huntsman’s patented technology in six black dyestuff products. Huntsman is seeking substantial damages and an injunction against further infringement.  Huntsman is also seeking substantial damages and an injunction against further infringement in a separate lawsuit against Zhejiang Longsheng Group Co., Ltd., Zhejiang Keyong Chemical Co., Ltd., and Shanghai Colva Dyestuff Industry Co., Ltd. This matter is currently being heard before the High People's Court, Shanghai.  In earlier decisions, both the Shanghai Intermediate People’s Court and the Shanghai High People’s Court ruled that Shanghai Colva Dyestuff Industry Co., Ltd. had infringed Huntsman’s Chinese Patent No. ZL00106403.7 by manufacturing and selling Colvazol Super Black LC-G and Colvazol Super Black LC-R dyes.

Rohit Aggarwal, President of Huntsman Textile Effects said: “We are very pleased with the PRB’s decision which demonstrates the State Intellectual Property Office’s commitment to steadfastly uphold intellectual property rights in China which protect valuable and advanced technology. This encourages companies like Huntsman to continue to invest in research and development in our aim to bring cutting-edge innovation to the textile industry. Huntsman will vigorously pursue those who are infringing our intellectual property rights to stop the unlawful infringement and pursue full compensation for our losses”.

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

Marco Aslim und Thomas Martini, die beiden Gründer der Fachmesse BRIGHT für Streetwear, Skateboarding und Boardsport, treten zu Ende Februar nach 13 Jahren als Geschäftsführer zurück. Damit ist ein weiterer Schritt der Integration der BRIGHT in die Organisation der PREMIUM GROUP unter Anita Tillmann und Jörg Arntz vollzogen, die die BRIGHT bereits im Jahr 2015 zu 100 % übernommen haben.

„Die BRIGHT war von Anbeginn mehr als eine konventionelle B2B-Plattform. Die Community, das Arbeiten mit Freunden und der Basis der Industrie, Skateboarding, Art und Musik waren immer treibende Kraft und Hauptaugenmerk der Messe. Die Emotionen und die gemeinsam erlebten Momente, deren Stahlkraft weit über die Messe hinaus wirksam waren, sind bleibende Mehrwerte. Berührungen, die wir nie vergessen werden. Viele Menschen haben in den vergangenen Jahren viel getan, damit die BRIGHT zu dem wurde, was sie ist: eine große Familie. Dafür möchten wir uns in aller Form bedanken" (Thomas Martini, ehemaliger Geschäftsführer BRIGHT).

 Der Geschäftsführerwechsel geht mit einer neuen konzeptionellen Ausrichtung des Formats einher. Die Nähe zwischen BRIGHT und SEEK wird über die gemeinsame Location hinaus erweitert. So wird eine Auswahl der BRIGHT-Brands in das Format der SEEK integriert und neu definiert. Ziel ist es, auf der einen Seite den Spirit der Community der vergangenen 13 Jahre zu erhalten und gleichzeitig eine Transformation in Gang zu setzen, die die Anforderungen des Contemporary-Street- und Urban-Markts widerspiegelt und bedient. Die Teams der SEEK und der BRIGHT werden zukünftig noch enger zusammenarbeiten und gemeinsam neue Konzepte und Formate basierend auf den Werten der BRIGHT entwerfen.
 
„Wir schätzen Thomas Martini und Marco Aslim sehr und blicken auf eine gute Zusammenarbeit zurück. Wir haben viel gelernt und profitieren auch weiterhin von ihrem Wissen und Know-how. Die PREMIUM GROUP steht dafür, Konzepte kontinuierlich weiterzuentwickeln und neu zu definieren. Skateboarding ist einerseits eine Community-getriebene Nische und andererseits – ab 2020 – eine olympische Disziplin. Wir beobachten, dass sich die Werte, Kultur und Sprache der Community im globalen Kontext verändern und arbeiten daran, diese Vielfältigkeit im jeweils passenden Rahmen zu präsentieren" (Anita Tillmann, Managing Partner PREMIUM GROUP).
 
Die BRIGHT ist Europas führende Fachmesse für Streetwear, Skateboarding und Boardsport.  2005 begann die Geschichte der Messe in Frankfurt im ehemaligen Polizeipräsidium mit 50 Brands und 500 Besuchern. Fünf Jahre später, im Jahr 2010, ist die BRIGHT mit 250 Brands und 5.000 Besuchern nach Berlin gezogen. Im ehemaligen Stasi-Kongresszentrum in der Normannenstraße hat sich die Internationalität und die Besucherzahl fast verdoppelt. 2015 machte die BRIGHT als Teil der PREMIUM GROUP und zusammen mit der SEEK die Arena zum wichtigsten Street- und Skatewear-Hub Europas.

The need for real dialogue becomes ever more crucial
Amid reconstruction, the world is facing severe realities. In the midst of political disorder, environmental problems, and social scandals, how do we seek the light within the darkness of chaos? As societies become inundated with global waves of conflicting news, the need for real dialogue becomes ever more crucial. Personal interaction is irreplaceable – communicating with nature, reading the signs, and sensing the wind. Creating emotional connections with others and opening the mind to rationality. Now is the time to solidify core values with responsibility and identify key essences of life.

The view from a fashion perspective: toughness and resilience
How will fashion respond to these ever-changing turbulent times? Will fashion allow other elements to penetrate our lives whilst innumerable other issues make their presence felt? Fashion is meant to console, to provide a retreat during unpredictable times. At its core, fashion represents unhindered confidence and allows us to freely express ourselves. Let us address how to best confront negative forces through fashion and mindful resilience.

Intertextile Directions Spring / Summer 2019 Trend Forum
Developed by renowned trend experts from Tokyo, New York, Milan and Paris, the Intertextile Directions Trend Forum will present three trends for Spring / Summer 2019 under the overall theme ‘Dialogue’: @ sense, # couture and e. native. Exhibitors’ fabrics will illustrate the colour, fabric and print styles of each trend.

Overall colour trends
This season witnesses an enriched palette, encapsulating a refined and premium feel. Refreshing and vivid colours introduce a sense of vitality and elicit creativity.

As well as the international trends for Spring / Summer 2019, three Fabrics China Trend Forums will illustrate the domestic trends for ladieswear and menswear, as well as a ‘Fashion Focus’ area. A number of seminars will also be held to give more insight into the S/S 19 trends.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

Ein weiteres Mal sind drei Tage SEEK wie im Flug vergangen. Vom 04. bis 06. Juli 2017 kamen zahlreiche Besucher in die Arena Berlin. Auch diese Saison wurde klar: Die SEEK ist etwas Besonderes. Drei Tage voller Dynamik und Kommunikation zogen internationale Brancheninsider und Einkäufer auf das Arena-Gelände, um die neusten Kollektionen zu sehen, zu ordern, einander kennenzulernen und Ideen sowie Inspirationen auszutauschen. Sales Director Maren Wiebus blickt zurück auf die Highlights des Events und sagt: „Die Stimmung war großartig. Jetzt, da die SEEK als fester Bestandteil der Berliner Fashion Week etabliert ist, gibt es erst recht keine Zeit mehr, sich auszuruhen.” Der Auftakt einer großartigen Woche war der Launch des SEEK Magazines No. 6 im Fechtner Delikatessen auf der Torstraße – dem angesagten Lunch-Spot der Mitte-Crowd. Das Fechtner stellte zugleich die temporäre Heimat des “all-white-everything” Super Natural Pop-up-Shops der SEEK dar, der eine liebevoll in Szene gesetzte Auswahl kuratierter SEEK-Brands präsentierte.

As the product development process in the apparel industry continues to speed up, producers are looking for new fabric and accessory options outside of the traditional sourcing seasons. As such, with its added advantage of being located in the core area of China’s fashion industry and nearby Hong Kong, the popularity and importance of July’s Intertextile Pavilion Shenzhen has been growing within the apparel market in recent years. A number of renowned international and domestic brands, such as DKNY, Embry, FILA, Initial, Nine West Group, Peacebird, s.Oliver and many more, have already signed-up to attend this year’s fair, where they will source from around nearly 700 exhibitors.

“Once again this edition we are putting significant effort into inviting VIP buyers and matching them with our exhibitors, so we know that many key brand buyers will source at the fair again,” said Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd. “Last year the feedback from these buyers, such as Diesel, DKNY, KINJI and Marc O’Polo, was that they are consistently seeking new materials to develop new products throughout the entire year, therefore, they find Intertextile Pavilion Shenzhen increasingly beneficial to them, particularly because of its timing and high quality of products.”
One buyer already confirmed to attend, DKNY, sent its Fabric Manager Mr Patrick Chan to visit the fair last year, who praised the experience after his trip. “I’m satisfied with the quality of the suppliers and their products. I’ve found some potential suppliers in the Fine Japan Zone and received some samples. They provide high-quality fabrics with good design,” he said.