From the Sector

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.

At this year’s Heimtextil from 8-11 January 2019 in Frankfurt, Trevira GmbH presented a new Trevira CS joint stand on an impressively huge scale under the motto “Textile Values”. Its fair stand concept, scaled up for 2019, attracted a large number of visitors. Together with 26 top Trevira CS customers, Trevira told the story of the entire textiles value chain across a 2,200+ msq site. Visitors were taken on a journey that started with the basics – fibre production and yarn manufacture – before moving on to the dyeing, weaving and warp and weft knitting stages and ultimately to the end of the journey, the textile editing.

Trevira GmbH’s CEO Klaus Holz said, “I think we have once again “upgraded” our presence at Heimtextil. If I say this I’m not only talking about size and number of participants in our stand, but rather about value. Including all kinds of Trevira CS partners from yarn producers to fabric manufacturers and textile editors, our stand was reflecting the entire textile value chain.”

The highlight of the stand was Trevira’s new trend show for the contract market, “Trends in Contract by Trevira CS”. The show gave visitors, especially (interior) designers and decorators, an opportunity to find out more about innovative textiles and colour trends on the home and contract market.

Head of Marketing Anke Vollenbröker said, “We are extremely pleased that our trend show met with such great interest, and it was fantastic to see so many interior designers participating in our trend gallery tours. The trend area proved to be a source of inspiration for numerous visitors and demonstrated the expertise of our Trevira CS partners when it comes to outstanding design.”

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that Thailand-based Absolute Denim will be the first denim manufacturer to switch 100% of its production to aniline-free* indigo dyeing.

Absolute Denim is a Thailand-based denim manufacturer producing high quality denim with a focus on eco-friendlier materials and processes. The company can produce up to 2 million meters of denim per month (that's approximately 1.5 million pairs of jeans!), for customers that include some of the biggest brands and retailers in the world.

Archroma’s Denisol® Pure Indigo 30 liquid dye was first launched in May 2018 as a non-toxic way to produce the traditional, iconic indigo blue that consumers associate with denim and jeans.

During production, some of the aniline stays locked into the indigo pigment and is difficult to wash off the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. As a result of its toxicity (more hazardous than alkylphenols) it is now starting to feature on the restricted substance lists (RSL) of some major clothing brands and retailers.

The new Denisol® Pure Indigo 30 liq was therefore developed as an aniline-free* indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Archroma tested Denisol® Pure Indigo at Absolute Denim mill in Thailand. Archroma wanted to be sure that the new indigo dye would perform exactly the same as conventional indigo.

James Carnahan, Head of Sustainability at Archroma, comments: “At Archroma we continuously challenge the status quo in the deep belief that we can make our industry sustainable - but we cannot do it alone. Without forward-thinking manufacturers such as Absolute Denim to consciously adopt these eco-advanced innovations in their daily production, like our aniline-free* Denisol® Pure Indigo, we will not be able to move this industry forward on our resource-constrained world we live in. As consumers are increasingly aware of, and concerned about, climate change and ecological threats, this is not only the right thing to do - it is also good for business.”

“Deep down inside most of us want the world to be a better place for our loved ones and for future generations,” insists Vichai Phromvanich, Board Member, Absolute Denim, “starting with how we live, what we eat, what we wear, still trying to be cool, fashionable, still trying to be environmentally conscious. Archroma’s aniline free indigo project is therefore something we as a new generation manufacturer have supported from the beginning, by opening our doors for tests in the project phase, and now by sending out our articles to many of our customers. For us, after all, a nice pair of jeans looks even nicer without aniline!”

* Below limits of detection

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

A new important partnership marks the path of Itema towards a greener future for the whole denim production chain. Prosperity Textile, one of the main denim producers worldwide, has chosen for its new facility one of the most interesting and sustainable-oriented Itema technologies, iSAVER™ equipped on the Itema R95002denim. Prosperity Textiles is, in fact, one of the early adopters of this new technology chosen for the new plant that the world-famous indigo fabrics producer will open in Vietnam, and that will be exclusively equipped with the latest Itema weaving machine model, demonstrating once again its green, future-oriented approach.

Thanks to its partnership with Itema, Prosperity Textiles makes again a step forward in terms of sustainable innovation, as one of the first denim producers able to successfully turn - even the weaving production - green. A partnership that is planned to be showcased in some of the most important textiles exhibitions worldwide focusing on Asian and denim markets. A path that starts with KingpinsShow, Amsterdam (October 24-25) where the Chinese denim producer will put into the spotlight this brand-new solution aimed at further increasing the eco-driven approach of the company; an important appointment is also in the Itema calendar: the ITMA Asia + CITME 2018 exhibition, Shanghai (October 15-19) where the Italian company showcased the important green step-forward in denim weaving processes and the full range of its innovations.

iSAVER™: the ideal green tool for denim weaving
This new technology, developed by ItemaLab™, the Itema Advanced Innovation Department, isable to completely eliminate the left-hand weft waste, allowing to insert the weft yarns in the fabric without the need of additional yarns. iSAVER™ significantly reduces raw material waste, leading to tangible benefits in terms of machine’s efficiency, cost reduction and energy saving.

Just consider that the weaver will gain a minimum saving of € 2.000 per year per machine, and our planet will gain even more. In fact, for the first time in the weaving industry, a sustainable approach when choosing the weaving equipment is now possible. Thanks to iSAVER™, 1.000 Kg of cotton per machine per year – the 3% of the total raw materials - will be saved, thus avoiding the waste of 20 million liters of water, equivalent to 400.000 showers.

Numbers are clear: the introduction of iSAVER™ clearly sets a new benchmark in terms of sustainability within denim fabric production. Furthermore, the iSAVER™ is one of the key features of the Itema R95002denim, the rapier weaving machine born and designed to weave denim guaranteeing to weavers superior textile quality, outstanding user-friendliness and tangible energy and raw materials saving.

A joint eco-driven path
Itema, understanding very well the importance of saving resources and energy to drive the textile production in the direction of a more conscious manufacturing, focused its attention to develop breakthrough weaving solutions and in 2018 introduced to the market the iSAVER™, a revolutionary device dedicated specifically to denim fabrics able to eliminate the waste selvedge on the left-hand side of the fabric.

This is one of the reasons-why Prosperity Textiles has chosen to adopt this extraordinary technology for its new facility. Today Prosperity Textiles is one of the main denim producers worldwide, counting 1,300 employees and 20 offices worldwide. Moreover, a second state-of-theart denim mill will be inaugurated in Vietnam by the end of 2018.
What makes Prosperity able to stand out on a global scale, is not simply its products high quality but the ability to conciliate flawless denim fabric production with a sustainability-oriented mindset that permeates every stage of their textile supply chain.

Prosperity, indeed, adopted innovative green manufacturing concepts through all stages of the company’s operations, from product development, raw materials procurement and processing, to natural resources and energy utilization including waste management. Prosperity’s denim production is based on the employment of best quality yarns available on the market, while still targeting the most sustainable sources, from BCI to organic, recycled cotton, and from Tencel™ Lyocell to Sustans™, in 2017, more than 20 million yards fabric sales from Prosperity are with sustainable fibers inside.
The introduction of eco-friendly dyeing and finishing practices allows the company to create beautiful indigo shades and performance denims, with less water and energy consumption compared to the traditional systems. Last year, Prosperity produced 20% more fabrics than 2016, yet the water and electricity use and greenhouse gas emission was down by 11.5%, 7.9% and 5.4% respectively.

In this continuous process of improvement and contribution to a greener industry and planet, plays a central role the recent renewal of the historic partnership and strategic alliance with Itema – the leading manufacturer of cutting-edge weaving solutions – which represents the natural evolution of a constant process of research for partners able to support Prosperity Textiles’ growth as a sustainable company.
Up to now, all innovations and efforts done in this regard addressed the traditionally more polluting steps of the denim production. In fact, if the development of green technologies is nowadays spread in many fabric processing stages, such as finishing and dyeing, weaving was not yet capable to provide sustainable solutions to weavers.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
  They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
• Diresul® blacks & greys, a cosmos of greys and deep black and navies
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma

FILPUCCI GROUP proceeds along the path of commitment towards an ever more responsible innovation. The group takes part in the 83rd edition of Pitti Filati (June 27-29, 2018) with unique products, high-end knitwear and creative yarns, all resulting from the authentic Smart Innovation the company has been long committed to.
 
Research, style and fashion are key words for the world-renown Tuscan company, which unveils an always more responsible approach both at a corporate level and in terms of offer.
Here are some key elements to prove Filpucci’s relentless commitment:

• The GOTS (Global Organic Textile Standard) and OCS (Organic Content Standard) certifications obtained by the Filpucci dyeing plant add to the Clear to Wear (CTW) standard developed by Inditex Group and achieved in 2014 and to the Detox commitment, which was signed in February, 2016.
• Not only the best raw materials, but also an established knowhow in the fields of dyeing and finishing, always under the key concept of Responsible Innovation. This concept extends to each and every FILPUCCI collection and their ever-increasing offer, the roughly twenty innovative new items, the Woolen line of carded yarns and the real spearhead of premium fashion, the Collection. Among this season’s new offer: Baby Camel Re.Verso™, RWS- certified merino organic wool, Re.Verso™ cashmere, organic silks and FSC-certified viscose.
• The achievement of further certifications such as the FSC (Forest Stewardship Council) for viscose shows the care and respect towards the ecosystem as a whole, guaranteeing a product derived from a forest or a plantation forest in the respect of strict environmental, social and economic standards. The RWS (Responsible Wool Standard) finally guarantees the use of wool coming from livestock managed under rigorous criteria oriented towards the wellbeing of animals and the reduction of environmental impact.
• Filpucci Group is all about a constant vocation towards new generation values and a reliable, traceable and transparent manufacturing process, as shown by the Re.Verso™ circular economy supply chain, of which the group is a unique ambassador in the field of high-end/low-impact knitwear yarns.

With absolute quality always in mind, FILPUCCI GROUP represents a corporate model that has made of sustainability a real mission, embarking on complex paths that have brought great results with fashionable textile solutions lead by ethnical and sustainable values. Thanks to this, Filpucci’s products have become part of Patagonia Collections, an important acknowledging from the brand’s part, whose managers stated: “We are always on the hunt for the highest performing, lowest impact materials. We were thrilled to find Re.Verso ™ (95/5 transformed) Cashmere yarn from Filpucci. It allowed us to create a range of products with the insulative and soft properties of cashmere while adhering to our mission statement; build the best product, cause no unnecessary harm.”
FILPUCCI GROUP’s commitment is evident and it moves forward thanks to the passion towards responsible and innovative paths that contribute to turning the group into a reliable partner, symbol of quality and excellence.

Filpucci is also a C.L.A.S.S. (Creativity Lifestyle And Sustainable Synergy) partner.

Color Solutions International, a member of the DyStar® Group, is launching their Color Analysis magazine for Autumn/Winter 2019. This trend forecasting magazine provides high-level global color information for color managers, directors and designers to support the color palette development process. The magazine includes a seasonal color palette selected from a wide range of approximately 3,700 CSI ColorWall™ colors.

Based on most recent customer feedback, the newest edition of Color Analysis was adjusted to be more valuable for the design and palette creation process. This new edition contains 54 trend and validated colors, additional color data, and color evolution & direction by hue. Furthermore, the color trend palettes are displayed by product category: Women’s, Active, Intimates, Men’s, Kids and Home. Similar to the previous editions, Color Analysis also includes our proprietary Relative Color Popularity report (RCP), offering color predictions with validation of performing colors.

“As the Color and Trend Director at Color Solutions, it is my goal to provide relevant seasonal color data collected through consumer insights and market analysis. We are able to look further out for trends that are affected by world views, mindset and cultural influences,” said Heather Sandwall, CSI Color and Trend Director

The CSI and DyStar team of experts work together and assist their customers in color development and communication as well as in the dyeing and quality inspection process to achieve best possible results and sustainable fashion. All CSI products are produced with high-quality, eco-friendly DyStar colorants.

Archroma, a global leader in color and specialty chemicals, announces the appointment of Marcos Furrer to the post of President Brand & Performance Textile Specialties, and Innovation, based in Archroma's headquarters in Reinach, Switzerland.

Marcos Furrer will take over from Thomas Winkler who will retire at the end of March 2018 after more than 30 years in the textile industry, among which 12 years at the helm of the business.
Announcing the appointment, Archroma CEO Alexander Wessels said: “Marcos Furrer was rather an obvious choice when we started to look for a potential successor for Thomas Winkler. He has the right combination of strong textile expertise and leadership skills that we need to drive the business in line with Archroma’s ambitious growth strategy.”

A Swiss national with a 20 years career, Mr Furrer has earned a strong reputation as a well-rounded business manager with excellent leadership skills and a taste for delivering on targets.

Biography
A Chemical Engineer from the Ingenieurschule Beider Basel, Mr Furrer started his career with Clariant in Switzerland as Product Manager Sulphur Dyes, Textile Business, in 1997. He then grew in the organization as Head of Continuous Dyeing Cellulosic (1999 to 2001); Head of Business Unit (BU) Textile Dyes and Textile Chemicals in México (2001 to 2005); Global Head for the Product Group Cellulosic Dyes (2005 to 2007), Head of BU Textile Chemicals Latin America (2007 to 2009); Head of BU Textile Chemicals Americas (2009 to 2012); Head of Emulsions (January 2012 to June 2012); and Head of Marketing and Sales Plastic and Special Applications, BU Pigments (January 2013 to 2015).

His latest role as Head of Regional Business Line Europe, BU Pigments, Strategic Plastics, brought him back to Switzerland in January 2015, with the mission to implement the new BU Pigments regional structure in Europe.

Mr Furrer speaks 5 languages: English, German, Spanish, Portuguese and French.
 

At Pitti Filati, and as part of a journey to be and make better products, the FILPUCCI GROUP invites the fashion industry to experience its new line of more sustainable yarn creativity.

The “Responsible Innovation Collection” represents a new level of smart innovation linked to responsible, eco-centric production. The collection uses the best high-tech, natural-based materials, combined with FILPUCCI’s dying & finishing expertise. This gives customer’s real access to a new, fashion-forward aesthetic, where quality and smart uniqueness in these new, more responsible yarns, deliver a new textile era of sustainable fashion solutions that are driven by ethical and natural values.

FILPUCCI is proud to announce it is a new official partner of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy). Since 2007, C.L.A.S.S., a unique multi-platform HUB based in Milan, specializes in integrating a new generation of eco-values for fashion, home products and business strategies. These values speak to a new, smarter, contemporary consumer. Founded by Giusy Bettoni, C.L.A.S.S. introduces a new way of design thinking that represents a shift in culture, enabling businesses to be competitive and socially innovative.
From this platform, FILPUCCI is also a key ambassador for the unique C.L.A.S.S. partner product, Re.Verso™, for its luxury upcycled cashmere yarns.

New additional steps on the FILPUCCI journey towards a more responsible approach to smart design and manufacture also include:

• The signing of a new ‘Values Chart’ in conjunction with a joint consortium to guarantee sustainable production chains that are fully traceable with certified materials and measured environmental performances, such as reducing CO2, water use and power consumption.
• The company is also GRS accredited with dyeing facilities that are second to none, boasting a GOTS certification alongside recycling 70% of water and also as part of the DETOX campaign for the last 3 years.  This is a key added value mirroring the whole company’s dyeing operation.
• The FILPUCCI GROUP produces its own ‘Balance of Sustainability’ report each year to measure and account for issues relating to the business impact of a responsible innovation strategy, and research optimization into origins of materials, transparency, certifications and processes designed to reduce environmental impacts and a no-waste manufacturing philosophy.

There are seven new yarn styles in the Responsible Innovation Collection with smart blends of only the best, certified, organic and natural materials (cottons & linens), new generation wool Re.Verso™ and sustainable hi-tech materials (Cupro and Q-Nova) for 5 to 18 gauge knitwear design:
CERA, GRACE, BIONYCO, SUGHERO, FOUR SEASONS, PLANET, BONTON, KAMUT