From the Sector

Double the production rate, with lower energy consumption per kilogram of fiber material – that might sound like a contradiction, but the new Trützschler pre-cleaner CL-X makes it possible. It gently and reliably removes coarse contaminants like leaf debris, stalks or seeds from cotton with minimum loss of good fibers. The pre-cleaner CL-X provides more efficiency and lays the foundation for a high-quality end-product before the cotton is further processed in mixers and fine cleaners.

CL-X features at one glance

• Continuous production of 1,600 kilograms per hour for present blow room configuration.
• 30% energy saving compared to the current benchmark.
• Integrated WASTECONTROL for automatic adjustment recommendation of waste excretion to avoid unnecessary fiber loss.
• 2.60 m long cleaning section.
• New and improved grid geometry for better separation and gentle tuft treatment.
• Material draft due to 10 % higher speed of second opening roller for reliable and consistent fiber transport.
• Optimal cleaning level and minimal fiber loss due to individual and stepless grid adjustment for each opening roller by motor.
• Gentle tuft treatment with adjustable opening roller speed.
• Synchronized lot management (automatic lot change for up to three lots).
• Connection possibility for a waste box (for waste analysis).
• Lower cost of ownership.

Wülfing GmbH is one of the oldest but also one of the most modern home textiles companies in Germany, with its main weaving and finishing operations located in Borken, North Rhine-Westphalia, and a further jacquard weaving mill in Steinfurt, as well as with a making up and packaging plant in the Czech Republic.

At its Borken plant, Wülfing has employed a Monforts sanforizing line since 2009 to guarantee the required dimensional stability and shrink-fastness of its high quality bed linen. With a working width of over three metres, the sanforizing process is a central pillar in the production of typical wide-width cotton fabrics for home textiles.

In 2017, the company was able to acquire a second Monforts sanforizing line from another company which, although built in 2005, had been virtually unused. It was overhauled and installed behind a Monforts equalizing frame of a similar age.

“Unfortunately, the two machines had to be operated separately via individual controls and did not represent an integrated unit,” says Schulte-Mesum. “This resulted in deficits in the desired productivity and in the control technology.”

Wülfing consulted with Monforts on a number of upgrade options and opted for a completely new joint control system to merge the two machines, as well as a new connecting inlet, a tensioning and damping field and a steaming unit.

“Monforts provided a fast and precise erection and commissioning of the technology in spite of the difficult pandemic circumstances,” says Schulte-Mesum. “The result has been an increase in production speeds by 20% and enhanced uniformity in fabric width through a much improved guidance system.

“We are also achieving energy savings as a result of the new control and drive technology and operation has been simplified and improved as a result of the unified control. We benefit from simplified access for maintenance work such as the grinding of the rubber blanket, but most of all we have greatly improved our flexibility and now have two almost identical Monforts sanforizing lines.”

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at ANEX/SINCE 2021 in Shanghai, China, from July 22 to 24, 2021. The product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/Wetlace, converting, textile finishing, airlay, recycling, and bast fiber processing.

Among the largest end-use markets for nonwoven products are materials for durable uses. Interior linings for cars, materials for construction, geotextiles, synthetic leathers for clothing and furniture, carpeting, filtration and many other industries rely on the use of nonwovens produced using the needlepunch method.

ANDRITZ Nonwoven’s processes play a pioneering role in the production of biodegradable materials. For many years, ANDRITZ has offered different processes, like spunlace, Wetlace and Wetlace CP, all with one goal in mind: Elimination of plastic components while maintaining the high quality of the desired product properties. Such processes achieve high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo or linen, without chemical additives results in a 100% sustainable fabric, thus meeting customers’ needs exactly as well as supporting the strong tendency to move away from plastics and synthetics.

The latest development in this field is the ANDRITZ neXline wetlace CP line. This process combines the benefits of two forming technologies (inline drylaid and wetlaid web forming process) with bonding by hydroentanglement. Natural fibers, like pulp or viscose, can be processed smoothly and generate a high-performance and cost-efficient wipe that is fully biodegradable and plastic-free.

The recent ITMA Asia + CITME exhibition was marked by a strong showing from Swiss Textile Machinery members, in what was the sector’s first major face-to-face showcase since the pandemic restrictions.

With an attendance comprised of 99% visitors, the show still proved a satisfactory venture, the Swiss companies reported. There was real product innovation, and meaningful customer interest, prompting a genuine mood of optimism among exhibitors. The event was held from June 12-16 in Shanghai, with 18 Swiss exhibitors, of whom 13 were Swiss Textile Machinery member companies.

The Swiss Textile Machinery member firms exhibiting at ITMA Asia + CITME 2020 were:

• Bräcker
• Graf
• Hunziker
• Loepfe
• Luwa
• Polytex
• Rieter
• Santex Rimar
• Sedo Engineering
• SSM
• Stäubli
• Uster
• Willy Grob

Mit ihrem Taschensortersystem BG Pouch System erfüllt die BEUMER Group die wachsenden Anforderungen an das E-Commerce-Fulfillment – und die Kombination von Einzelhandel und D2C. Der Betreiber erhält einen Matrixsorter für den Direktversand an Verbraucher und Filialen. Er profitiert von einem vereinfachten Retourenhandling, weil die dynamische Pufferung das erneute Lagern und Kommissionieren überflüssig macht. Der neue Sorter erhöht den Durchsazu um 25 Prozent im Vergleich zu herkömmlichen Taschensortern. Er benötigt nur wenig Platz und eignet sich für die Sortierung ganz verschiedener Artikel – von Hightech bis hin zu High-Heels. Die Gewichtskapazität der Taschen beträgt sieben Kilogramm.

Mit dem BG Pouch System ist es Logistikern und externen Logistikdienstleistern (3PL) möglich, die steigende Nachfrage nach schnellen, durch den E-Commerce bestimmten Taktzeiten zu erfüllen. Das wachsende Problem der Retourenbearbeitung wird im Lager durch eine effiziente Handhabung auf Basis einer integrierten automatischen Zwischenpufferung für rückgesandte Produkte gelöst. Unnötige manuelle Arbeitsschritte werden vermieden, da die Retouren wieder direkt aus dem dynamischen Puffer zum Versand gebracht werden können, ohne dass sie an das Hauptlager zurückgeschickt oder nochmals kommissioniert werden müssen. In einem Omnichannel-Umfeld stellen die Sortier- und Sequenzierfunktionen einen unschätzbaren Vorteil dar. Die filialgerechte Sortierung der Waren sorgt dafür, dass die Produkte effizient entsprechend der Regalsequenz vereinnahmt werden können.

Das BG Pouch System hat eine Gewichtskapazität von sieben Kilogramm pro Tasche, wodurch es sich perfekt für Modeartikel von Schuhen bis hin zu Kleidungsstücken auf Kleiderbügeln (GoH) eignet, aber auch für eine breitere Produktpalette, einschließlich Druck und Medien, Pharma- und Beauty-Produkte sowie Elektronik. Diese Vielseitigkeit sorgt für hohe Flexibilität bei der Handhabung verschiedenster Artikel, unabhängig von der Notwendigkeit der Retourenabwicklung, saisonalen Spitzen oder Omnichannel-Anforderungen. Verschiedene Artikel, die für unterschiedliche Kunden vorgehalten werden und für unterschiedliche Versandarten bestimmt sind, können somit in einem einzigen intelligenten System zusammengefasst werden. Dies wird besonders für Logistikdienstleister interessant sein.

Jedes Modul des BG Pouch System kann bis zu 10.000 Teile pro Stunde sortieren. Der Einsatz eines dynamischen Puffers erlaubt manuelle Arbeitsschritte zu reduzieren, Intralogistikabläufe zu beschleunigen und ermöglicht eine vorausschauende Kommissionierung.

Technisch arbeitet das System mit einem berührungslosen Magnetantrieb für Stauförderer (ca. 80 Prozent der Förderstrecke in einem typischen System), der einen reibungsfreien Betrieb ermöglicht.

Stephan Heessels, Leiter des Geschäftsbereichs Logistic Systems bei der BEUMER Group: „Wir erkennen ein enormes Potenzial für eine moderne Version des Taschensorters, vor allem für Kunden, die ihre Fulfillment- und Distributionskette durch Prozessoptimierung verbessern wollen, um kürzere Warentransportzyklen zu erreichen und den Bedarf an manuellen Arbeitsschritten deutlich zu verringern."

Founded in 1952, Svegea of Sweden – a member of TMAS, the Swedish textile machinery association – has over 60 years of experience in exclusively designing, manufacturing and installing high quality collarette band cutting machines worldwide.

These are used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements, such as Triteks Trejd.

Founded in 1994, this family-owned business employs over 280 people at its plant in Prilep, North Macedonia, where high quality cotton fabrics are expertly converted into the products of the Tritex Underwear brand.

The Prilep operation encompasses the processing of fabrics, design, cutting, sewing, quality control and packing in a fully integrated workflow.

With around 200 sewing machinists, the Tritex product range encompasses briefs, boxers, slips, t-shirts, pyjamas and body slips which are primarily sold to countries within the European Union, as well as the domestic market.

The company has also just completed the digitalisation of its full production via the in-house DPC-SYS system, installing around 200 industrial PCs linking each of its workstations and departments.

Triteks Trejd currently operates three of the latest Svegea collarette cutting machines and is highly satisfied with their performance, as well as the service provided by the Swedish company.

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

Cutting-edge technology in a compact footprint
The EFI Reggiani BLAZE printer is designed to give textile companies the opportunity to enter the digital textile printing market with a compact solution. The new, 1.8-metre wide printer offers an innovative, low-maintenance, continuous recirculation ink system equipped with a level sensor and degassing as well as a printhead crash protective system for longer printhead life and superior uptime.
 
Thanks to its cutting-edge printhead reliability and low maintenance costs for a competitive TCO (total cost of ownership), the BLAZE printer can produce up to 125 linear metres per hour with a printing resolution up to 600x1200 dots per inch (dpi). The printer – which delivers excellent productivity as one of the fastest digital inkjet solutions in its class – has eight 300-dpi dual channel printheads and can print in up to eight colours with full variable drop size.

Flexible fabric feed and handling for higher productivity
The EFI Reggiani BLAZE is equipped with a continuous and switchable belt washing unit to remove water and fabric hairs. An embedded device for adhesive application offers the possibility to use thermoplastic, resin and permanent adhesives.
 
The printer also includes other features for enhanced productivity and value, including a 400-mm roll unwinder, expandable shafts, an air gun and a pneumatic bar for standard fabrics.

Efficient software and electronics technology
The Reggiani BLAZE printer offers a friendly and intuitive user interface with real-time image processing and flexible queue management. The software also runs a WYSIWYG (What You See Is What You Get) job editor, as well as tools to accurately predict printing speed and ink usage.

EFI Reggiani TERRA Silver enhancement
EFI has also released an enhanced version of the EFI Reggiani TERRA Silver printer, a 1.8-metre wide printer operating with EFI Reggiani’s unique TERRA pigment ink with binder solution for high-quality, highly sustainable, direct-to-textile printing without steaming or washing.

Features:

• A new recirculating ink system for superior reliability and minimum maintenance at start up and during production
• Several printing modes to ensure maximum flexibility in terms of design capability
• New, real-time image processing that eliminates time spent in image pre-calculations
• A user friendly, intuitive interface
• A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.