From the Sector

TINTEX is this year recipient of the unique and prestigious annual recognition from The “Instituto de Apoio às Pequenas e Médias Empresas e à Inovação” (IAPMEI). TINTEX has been selected in recognition of its pioneering, Naturally Advanced global leadership, and the company’s superior and responsible fabric making for a fashion system that is driven by investments, transparency and fully traceable innovation.

TINTEX is pleased to open its doors as the Naturally Advanced centre of excellence in the latest IAPMEI OPEN DAY for textile leaders, protagonists, media and customers to experience, understand and enjoy the unique achievements TINTEX offers to the contemporary Portuguese textiles industry .
“We selected TINTEX to underline the importance of taking advantage of digitization and modernization at different levels in the textile industry being stunned by their commitment, shedding light on our territory’s most advanced and responsible processes and skills” José Marques dos Santos, president of IAPMEI.

In a fast moving globalized market, all companies must be able to adapt quickly and using innovation, creativity, and responsibility can help deliver successes. And here TINTEX can network between Technological Centers, Universities, and Knowledge Centers, as a strategic business and holistic imperative. And so sharing the Naturally Advanced strategy of TINTEX as a driver for change, IAPMEI recognizes this TINTEX OPEN DAY as a demonstration of practical market potential, and has partnered with CENTI  (Centre for Nanotechnology and Smart Materials the Institute for New Technologies) and CITEVE (an institution of national and international reference for the promotion of Innovation and Technological Development) as a way to guarantee this success.
 
Being able to drive material innovation, and to promote a new generation of sustainable values to contemporary fashion, active, sports and lingerie markets through responsible supply chains can be transformative for our future fashion systems, and TINTEX is proud to be selected as part of the Make Fashion Circular initiative by the Ellen MacArthur Foundation, helping  to better activate these changes across the fashion industry for all to enjoy.

Prompted by the need to offer an adequate in-depth analysis of topics such as the integration of sustainability in fashion and the importance of the transition to the circular economy, the shared journey of C.L.A.S.S., the multi-platformhub, a reference resource since 2007 for smart innovationin fashion and Polimoda, the internationally recognized institute, world-renowned for its independent approach and innovative vision in terms of “fashion education”, as a result of the perfect combination of business and design.

Eight sessionsduring which topicsrelated to smart innovation, the new role of the designer and the importance of a new generation of communication along withthe urgency of a transversalcooperation and the development of new business models strictly linked to a circular economy approach.
An inspirational path,intensive and engaging, aimed at involving Polimoda students of theFashion Design and Design ManagementMasters –in their future role of protagonists of the fashion industry.
A shared project, aimed at fostering the development of punctual knowledges on responsible innovation, which is to consider effective because of that concrete approach that involves the introduction of smart materials with a view to a circular economy approach.
This is how Polimoda, the fashion institute that boasts an innate and strong policy and strategic vision on the fashion universe at 360 °, and C.L.A.S.S, a reference point since 2007, specialized in the integration of smartvalues withinproducts and fashion companies, in addition to education, partneringto givelife to a driving force thattranslates into a culturalbackground for students.

Gianluca Croci's priority will be to support Lectra's French customers in their transformation towards Industry 4.0
Lectra announces the appointment of Gianluca Croci as Managing Director, Lectra France. Based in Paris, Gianluca Croci reports to Fabio Canali, President, Southern Europe & North Africa.

Gianluca Croci has more than 20 years of experience in the fashion industry. He began his career in 1998 in the department store chain La Rinascente before joining the Giorgio Armani group in 2002, where he managed, from 2006 to 2015, the Belgian and French subsidiaries. Gianluca Croci later held management positions for major fashion and luxury brands, such as Roberto Cavalli and Marcolin, and was recently the Sales & Marketing Director for Technogym France, a designer of sports equipment.

Gianluca Croci will fulfil Lectra's promise to fashion companies in France: to facilitate the digitalization of their know-how in order to empower them to make a successful transition to Industry 4.0. This ambition is being realized by the 2018 launch of the revolutionary solution, Fashion On Demand by Lectra, which enables fashion companies to customize a garment or make it to measure. This end-to-end personalization offer—the first of its kind—complements a portfolio that is known to solve the pressing challenges confronting the fashion industry. The latest, Kubix Link, developed by Kubix Lab, a start-up acquired by Lectra in January 2018, is an innovative platform for managing product information.

"France is known worldwide for being a leader in fashion and technological innovation. It is a country where brands, retailers and manufacturers have already begun their transformation towards Industry 4.0. I am proud to support our customers’ pursuit of greater connectivity and collaboration in their operations, as well as in assisting them to make the shift to personalization," says Gianluca Croci.
Gianluca Croci and his teams are committed to providing their French customers with the high level of expertise and service that characterizes Lectra's value proposition.
Gianluca Croci's efforts are also tied to the dynamic activities of Lectra Southern Europe & North Africa. There are many synergies in the region’s fashion industry, ranging from the sharing of expertise between French and Italian companies to the integration into their ecosystem of the Moroccan and Tunisian subcontractors.

"Our regional organization enables us to be closer to our customers’ challenges and to provide them with the support they need to achieve their ongoing targets. Gianluca Croci will lead the French teams and contribute to the region's growth," says Fabio Canali. "His extensive experience with major Italian and French companies brings new energy to the development of Lectra France.”
Gianluca Croci is a graduate of the European Institute of Business Administration (INSEAD), Fontainebleau (France), and the Catholic University of the Sacred Heart, Milan (Italy).

HOW TO TRANSFORM YOUR ORGANISATION
The #FASHIONTECH BERLIN conference is Europe’s leading C-level tech conference for the fashion industry. On the morning of 15 January 2019, Anita Tillmann, Managing Partner Premium Group, Michael Stracke, Chief Business Development Officer and Ole Tillmann, Founder & CEO Peak, welcomed the auditorium at Kraftwerk to the ninth edition of #FASHIONTECH BERLIN.
 
Stracke says, “We are extremely pleased with this year’s edition of #FASHIONTECH BERLIN. Our thanks must once again go to our high-calibre international speakers and partners without whom this continuous growth wouldn’t be possible. We are unique in Europe at this level, which is also apparent from the consistently positive feedback from participants during and after the conference. Among other things, we have increased the exhibition space by 300% and we have had even more interactive workshops and masterclasses going on for those attending, to ensure knowledge transfer. The slightly modified concept – #LISTEN!, #LEARN!, #EXPERIENCE! and #BUSINESS! – was very well received, as we want to do justice to the individual needs of all participants.”
 
“It was especially gratifying this year to experience the positive atmosphere on site and to ascertain that the topic of digital transformation has finally grown in importance for the fashion industry too, which was also evident in the renewed increase in and international character of the visitor numbers. Digitalisation is fun of course, and you can achieve much more in a short space of time than was possible previously; and respond to customers’ needs much more strongly and in a more targeted way.”
 
The goal of the conference is for everybody who faces digital disruption to walk away with inspiration and hands-on advice to be able to get started or continue their own digital transformation and get ready for the future. Learn from leaders and innovators from other industries to be among the first in the fashion industry to implement innovation.

After the second day of Denim by Premiere Vision, ECO - Collaboration between companies of the EUROPEAN DENIM VALUE CHAIN was celebrated. In order to celebrate this Premium-SUSTAINABLE DENIM FABRIC, Berto teamed up with:

• BLACKHORSE LANE, maker and seller of ready-to-wear selvedge & organic raw denim jeans in London, with a focus on sustainability, community and unmatched quality;
• EVEREST, Italian company which offers an innovative sustainable range of textile treatments for the fashion industry;
• MARCHI&FILDI, spinning group located in North-Italy focused on innovation and sustainability, producer of the ECOTEC® yarns, with huge reductions on environmental impact; up to 78% in water, 56% in CO2 emissions and energy consumption. The same technology is used to produce yarns for Berto.

These companies collaborated on this exclusive project where the yarn is made through ECOTEC® System by MARCHI&FILDI, the fabric is made by BERTO, the garments are designed and made by BLACKHORSE LANE and finally washed by EVEREST.

• conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

Mostafiz Uddin, Managing director, Denim Expert Ltd., founder and CEO, Bangladesh Apparel Exchange spoke at the Copenhagen Fashion Summit 2018 during a panel on Tuesday the 15th of May 2018 about the Transparency in the supply chain.

This makes him the first Bangladeshi garment manufacturer to participate as a panel speaker at a CFS ever. His speech revolved around the apparel industry in his home country of Bangladesh and how his vision influences the way his company manufactures.
The panel was visited by over 1300 top profile participants, including her Highness the Crown Princes of Denmark. It was opened by CEO Leslie Johnson of the C&A Foundation.

Mostafiz Uddin said after the panel: “I am thankful to the CFS organisers for giving me such a great opportunity and honour, to my country to share the true story of Bangladesh and our apparel industry.”
About Mostafiz Uddin: Mostafiz Uddin is managing director of Denim Expert Ltd., an environmentally sustainable and socially responsible compliant garment manufacturing plant in Chittagong, Bangladesh. A visionary entrepreneur in the development of sustainable apparel systems, Uddin is personally driven by social and environmental ethics and is recognised as a game changer through his introduction of sustainable practices, innovation and fashion disruption, which he sees as key to the future of the Bangladesh apparel industry.
Uddin founded the Bangladesh Apparel Exchange (BAE) to promote sustainable practices within the Bangladesh apparel industry and to improve the country’s image via various initiatives under the banner of BAE, including the Sustainable Apparel Forum, the Bangladesh Fashionology Summit and Bangladesh Denim Expo. Through these endeavours he strives to promote the advancement of sustainable practices, including environmentally sound production methods, full transparency, innovation, circularity and technology.

About the Copenhagen Fashion Summit: The sixth edition of the Summit also boasted 75 high-level speakers, including sustainability thought leader David Roberts of Singularity University; EU Commissioner for Competition Margrethe Vestager; COO Eric Sprunk of NIKE; CEO Spencer Fung of Li & Fung; Vogue US fashion director Tonne Goodman; sustainability pioneer Dame Ellen MacArthur; models and entrepreneurs Lily Cole and Edie Campbell, the founders of Highsnobiety, Vestiaire Collective, Fashion Revolution, and many more. The hosts were Amber Valletta, actress, model and entrepreneur, and Tim Blanks, editor-at-large of The Business of Fashion.

Wrapping up two days of intense leadership roundtables, conversations and business meetings was a panel discussion featuring the Strategic Partners of Global Fashion Agenda: Kering, H&M, Target, Li & Fung and Sustainable Apparel Coalition, who took the stage to address why sustainability should be a leadership priority and to discuss some of the recommendations from the Pulse of the Fashion Industry 2018 report, released the week prior to the Summit.

• Connect people, data and processes with Lectra’s latest solutions to power up design and development teams

Paris – Lectra, the technological partner for companies using fabrics and leather, introduces collaborative solutions specifically developed for design and product development teams, enabling fashion companies to affront tighter deadlines and handle wider product mixes with speed and serenity.

With the rise of e-commerce, digitally dependent consumers expect personalized, innovative fashion delivered to their doorstep at the click of a mouse.

Fashion companies are struggling to keep up with consumer demands and looking for new ways to speed up design and development without compromising quality. Design teams work faster than ever to deliver fresh, eye-catching collections. Product development teams rush to transform new designs into consumer-ready products. Given the accelerated pace of the fashion marketplace, information sharing has become vital for these teams.

Lectra has developed two new solutions to fulfill the specific needs of these teams, Lectra Connected Design and Lectra Connected Development. These solutions deliver collaborative environments that integrate business applications to aggregate, standardize and store data from all design and product development stages. These innovative solutions make every-day working life less stressful by allowing criteria-based searches, inciting users to capitalize on data links, and providing them with innovative tools and services to speed up their processes.

Lectra Connected Design facilitates collaboration between textile and fashion designers, colorists, graphic designers, technical designers and their managers by providing design teams with a connected environment. Team members can access the platform via their Lectra Kaledo® design software and Adobe® Creative Cloud, share inspiration and review collections together or upload inspirations via dedicated mobile apps. This solution gives users the visibility needed to streamline, automate and monitor the entire design process to ensure that they remain creative under severe time constraints.

In the same way, Lectra Connected Development connects patternmakers, graders, technical design teams, managers, cost and margin specialists, marker makers and sample teams through data. It allows team members to connect through Lectra Modaris® 2D and 3D patternmaking software and Lectra Diamino® Fashion marker-making software. Thanks to the wide range of standard libraries and mobile applications provided, teams will improve the efficiency of technical specifications creation. The automation of business processes and real-time communication allow product development teams to avoid errors and deliver the right product quality and fit.

“We recognize first and foremost that today’s fashion industry professionals need to feel well-equipped and at ease in order to perform well under tight deadlines,” explains Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra. “We are confident that by introducing a new and easy way of collaborating through sound data management, both offers will help design and product development teams work faster and more easily to build quality into the products they design and develop. That way, they can reach their fullest potential as key contributors to their companies’ success.”

At Pitti Filati, and as part of a journey to be and make better products, the FILPUCCI GROUP invites the fashion industry to experience its new line of more sustainable yarn creativity.

The “Responsible Innovation Collection” represents a new level of smart innovation linked to responsible, eco-centric production. The collection uses the best high-tech, natural-based materials, combined with FILPUCCI’s dying & finishing expertise. This gives customer’s real access to a new, fashion-forward aesthetic, where quality and smart uniqueness in these new, more responsible yarns, deliver a new textile era of sustainable fashion solutions that are driven by ethical and natural values.

FILPUCCI is proud to announce it is a new official partner of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy). Since 2007, C.L.A.S.S., a unique multi-platform HUB based in Milan, specializes in integrating a new generation of eco-values for fashion, home products and business strategies. These values speak to a new, smarter, contemporary consumer. Founded by Giusy Bettoni, C.L.A.S.S. introduces a new way of design thinking that represents a shift in culture, enabling businesses to be competitive and socially innovative.
From this platform, FILPUCCI is also a key ambassador for the unique C.L.A.S.S. partner product, Re.Verso™, for its luxury upcycled cashmere yarns.

New additional steps on the FILPUCCI journey towards a more responsible approach to smart design and manufacture also include:

• The signing of a new ‘Values Chart’ in conjunction with a joint consortium to guarantee sustainable production chains that are fully traceable with certified materials and measured environmental performances, such as reducing CO2, water use and power consumption.
• The company is also GRS accredited with dyeing facilities that are second to none, boasting a GOTS certification alongside recycling 70% of water and also as part of the DETOX campaign for the last 3 years.  This is a key added value mirroring the whole company’s dyeing operation.
• The FILPUCCI GROUP produces its own ‘Balance of Sustainability’ report each year to measure and account for issues relating to the business impact of a responsible innovation strategy, and research optimization into origins of materials, transparency, certifications and processes designed to reduce environmental impacts and a no-waste manufacturing philosophy.

There are seven new yarn styles in the Responsible Innovation Collection with smart blends of only the best, certified, organic and natural materials (cottons & linens), new generation wool Re.Verso™ and sustainable hi-tech materials (Cupro and Q-Nova) for 5 to 18 gauge knitwear design:
CERA, GRACE, BIONYCO, SUGHERO, FOUR SEASONS, PLANET, BONTON, KAMUT

Lectra brings together partnership schools and industry experts to discuss how changing professions
in fashion are impacting training programs

Lectra, the world leader in integrated technology solutions dedicated to industries using fabrics, leather,
technical textiles and composite materials, recently welcomed partners from the world of
education to the company’s Bordeaux-Cestas campus for its eighth education congress. The
event was dedicated to the mega trends shaping the fashion industry and impacting
professions from design to production.

Over fifty representatives from among the most important fashion schools in Germany, Canada, China,
USA, France, Hong Kong, Italy, The Netherlands, Poland, United Kingdom, Switzerland and Sweden, participated
in this biannual meeting between industry experts and teaching professionals.

Fashion professions are evolving as companies make their first steps towards Industry 4.0, adopting 3D
and rationalizing the lifecycle management for their collections thanks to PLM. Lectra’s congress enabled
schools to discuss the developing role of designers and patternmakers, and the new elements to be
integrated into training programs.

Lectra illustrated future changes through presentations on design, patternmaking, 3D prototyping, and PLM.
“It is fundamental to bring innovation experts in the industry together with fashion schools, because
students will drive the evolution of this industry,” stated Pascal Denizart, Managing Director of the Centre
européen des textiles innovants (CETI).

Working with schools to design courses which meet the needs of fashion companies has always been at
the heart of Lectra’s education program. During the event, the company presented collaborative
experiences between partner schools and fashion brands, such as the competitions organised by Lectra
with Missoni, Balenciaga, and Armani in Italy, as well as Peacebird in China and JC Penney in the United
States.

In the United Kingdom, Lectra collaborated with COS (H&M group) and the Arts University Bournemouth
(AUB) for a competition centred on the design of a collection with zero waste.
“The process was totally digital, from design to the creation of a virtual prototype in 3D. Our students learnt
to optimize each stage of the process. By leveraging the use of Kaledo®, Modaris® and Diamino®, the
collaborative work between AUB, COS and Lectra is exactly the type of project that enormously motivates
our students. Live briefs developed with leading fashion brands and Lectra offer excellent opportunities
which directly inform industry currency and student employability,” explained Penny Norman, a lecturer at
AUB.

The event also shone the spotlight on China and its major role in the evolution of the fashion industry.
Li Min, Vice-Dean of the fashion and design faculty at Donghua university in Shanghai spoke of the event,
organized by Lectra, which brought together major Chinese companies, experts, and representatives from
the biggest schools in China.

“Exchanges on the impact of the Made in China 2025 plan on the fashion industry can better prepare
students for tomorrow’s professions, where digital and automation will occupy a far more central position
than today,” testified Li Min.

"The fashion industry is evolving so fast that sharing insights and best practices with experts and other
fashion schools has become vital to ensure we offer the best learning experience and technology tools to
our students", said Dr. Trevor J. Little, Professor of Textile and Apparel, Technology and Management in
the College of Textiles at NC State University.

“Lectra’s eighth education congress confirms the company’s commitment to our partner schools. We
shared our analysis of the market, the digitalization of the eco-system, and how Industry 4.0 principles can
be applied to the fashion industry. We also discussed mass customization and the role of PLM. While these
are key subjects for our customers, many schools are only now approaching them. We are preparing
tomorrow, today: Lectra is supporting our customers, and schools to play an essential role,” concludes
Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra.