From the Sector

Reset
8 results
06.01.2022

Messe Frankfurt cancels consumer goods fairs in January and February 2022

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

The four events, consisting of Christmasworld with its focus on seasonal and festive decorations, Paperworld and Creativeworld with their product ranges for paper, office supplies, stationery and hobby, craft and artists' requisites and Ambiente with its cross-sector range of products for the table, kitchen and housewares, furnishing and decorative accessories, home furnishing concepts, gifts and fashion accessories, are the recognised leading trade fairs in their sectors and open the trading year in their respective segments. Even in a reduced numerical form, the four trade fairs would still have been the leading events worldwide for their respective product segments.

However, the exponential increase in the number of infections worldwide in a very short period of time and the accompanying multitude of developments and decisions that are clearly outside the organiser's sphere of influence have led to a significant deterioration in the general conditions and necessary prerequisites for holding the four leading trade fairs as major events of international relevance at the end of January and in mid-February 2022 respectively. These developments include the classification of Germany as a high-risk area and the associated travel warnings and international and intercontinental travel restrictions in countries such as India, Japan and the United States, as well as the corresponding quarantine obligations. Equally important are the steadily rising infection figures and the accompanying urgent appeal, among others by the Robert Koch Institute and the expert council of the German Federal Government, to continue to reduce contacts to a minimum and to cancel all major events. At present, there are even further international fears that the critical infrastructure will not be maintained due to the highly contagious Omicron variant. The majority of exhibiting and visiting companies at Christmasworld, Paperworld, and Creativeworld as well as Ambiente are currently reacting to this overall situation with travel and trade fair attendance bans for reasons of duty of care towards their employees to protect them from health risks. The global willingness to travel is dropping enormously at the moment.

There are no plans to postpone the event. Detlef Braun, Member of the Executive Board of Messe Frankfurt, explains: "Since the trend-oriented order cycles of the international consumer goods industry require an annual event at the beginning of the year, a shift to the second half of the year would not meet the needs of the exhibiting companies and visitors."

Nordstil to be held in Hamburg from 15 to 17 January 2022
In the interests of the sectors involved, the planning and implementation of Nordstil from 15 to 17 January 2022 is not affected. This trade fair will take place in the Free and Hanseatic City of Hamburg at this time due to other general conditions for local implementation. However, the extremely volatile situation is continuously reviewed and assessed in close exchange with the relevant local authorities and industry partners.

Messe Frankfurt's digital platforms for business success
Messe Frankfurt has already been actively helping retailers to help themselves since 2019 with Nextrade, the first order and data management platform for the home and living sector, and Conzoom Solutions, an information platform for the global consumer goods sector. "A second year without appropriate ordering, inspiration and networking formats poses considerable and in some cases existentially threatening challenges for retailers worldwide," Braun explains. "With our digital offers, we are specifically supporting our partners in industry and trade in this volatile situation. In addition, we will continue to put all our energy and optimism into safe and promising trade fairs. Because there is no substitute for meeting in real life."

Information on the planning of the Frankfurt consumer goods fairs for 2023 will be announced at the beginning of February 2022.

Source:

Messe Frankfurt Exhibition GmbH

13.12.2021

TMAS: Digitalisation demands streamlined solutions

Fully integrated production lines from single source suppliers have increasingly become the norm in the textile industry and make complete sense in meeting today’s complex supply chain needs, according to TMAS – the Swedish Textile Machinery Association.

“Over the past few decades, textile mills have transitioned from consisting of collections of individual machines serviced and maintained largely by in-house mechanics as well as separate supplier companies for each part of the production line,” says TMAS Secretary General Therese Premler-Andersson. “Those in-house engineering service teams have diminished over the years, while the introduction of electronic drive systems in the 1980s and 90s also put an increased emphasis on the need for third party electrical engineers, operating separately to the machine builders.

“Subsequently, mechanical machines and electronic drive systems became much more integrated, and more recently, with the advent of digitalisation, entire production lines are becoming centrally controlled with remote, instantaneous connections to their suppliers for service and maintenance.

Fully integrated production lines from single source suppliers have increasingly become the norm in the textile industry and make complete sense in meeting today’s complex supply chain needs, according to TMAS – the Swedish Textile Machinery Association.

“Over the past few decades, textile mills have transitioned from consisting of collections of individual machines serviced and maintained largely by in-house mechanics as well as separate supplier companies for each part of the production line,” says TMAS Secretary General Therese Premler-Andersson. “Those in-house engineering service teams have diminished over the years, while the introduction of electronic drive systems in the 1980s and 90s also put an increased emphasis on the need for third party electrical engineers, operating separately to the machine builders.

“Subsequently, mechanical machines and electronic drive systems became much more integrated, and more recently, with the advent of digitalisation, entire production lines are becoming centrally controlled with remote, instantaneous connections to their suppliers for service and maintenance.

“In this context, the integration of machinery and automation specialists as single-source suppliers makes perfect sense, while partnerships between machine builders and their customers have never been more important.”

The recent acquisition of Nowo textile machinery from its previous owner, Brandstones Ab Oy, by TMAS member ACG Kinna, she adds, is a good example of this general trend.

Nowo, headquartered in Turku, Finland, designs, manufactures and exports high-end textile production machinery mainly for the fibre processing industry. At the end of the 1980s it introduced the highly successful Nowo Vac pillow filling system, which has been its best-selling system, alongside the Noworoll ball fibre machine, introduced in the 1990s.

Nowo’s machine range covers the entire production process from bale opening to weighing and filling, and complete production lines are tailored to the specific needs of customers. The company can also deliver individual machines such as bale openers, cards, cross-lappers, pickers, mixing devices, material silos, sucking devices, anti-static units etc. Seven patents cover the company’s technologies.

Founded in 1977, ACG Kinna Automatic, based in Skene in Sweden, specialises in customised and cost-efficient solutions for the production of pillows and quilts. All of its design, manufacturing and final line testing is carried out in Sweden and the reliability and longevity of its machines has earned it the trust of the world’s largest furniture and home decoration retailers and Europe’s largest manufacturer of pillows and duvets, among many customers.

Source:

TMAS / AWOL Media

(c) TMAS
The new TMAS board members (left to right) Sven Öquist, Jerker Krabbe and Semir Pavlica.
08.11.2021

TMAS has appointed three new members to its board

Jerker Krabbe of Eton Systems, Semir Paclica of Baldwin Technology and Sven Öquist of Coloreel will contribute a wealth of experience from a wide range of industries to the Swedish Textile Machinery Association.

Jerker Krabbe joined Eton Systems, one of the leaders in intelligent overhead conveyor systems, as CEO six months ago, and has more than 25 years of commercial, operational and international experience within several well-known companies such as Electrolux, Husqvarna, Gunnebo and Assa Abloy, and most recently as CEO of Sector Alarm AB.

Semir Pavlica has a master’s in finance and started his career at the SEB banking group before joining Baldwin Technology five ago. He is now managing the company’s process improvement and performance.

Sven Öquist joined Coloreel as Vice President of Sales in April this year. He has an international background with previous positions as Managing Director/CEO for a number of Swedish companies. He has also led the global sales team at Polestar, the electrified brand of Volvo Cars.

 

Jerker Krabbe of Eton Systems, Semir Paclica of Baldwin Technology and Sven Öquist of Coloreel will contribute a wealth of experience from a wide range of industries to the Swedish Textile Machinery Association.

Jerker Krabbe joined Eton Systems, one of the leaders in intelligent overhead conveyor systems, as CEO six months ago, and has more than 25 years of commercial, operational and international experience within several well-known companies such as Electrolux, Husqvarna, Gunnebo and Assa Abloy, and most recently as CEO of Sector Alarm AB.

Semir Pavlica has a master’s in finance and started his career at the SEB banking group before joining Baldwin Technology five ago. He is now managing the company’s process improvement and performance.

Sven Öquist joined Coloreel as Vice President of Sales in April this year. He has an international background with previous positions as Managing Director/CEO for a number of Swedish companies. He has also led the global sales team at Polestar, the electrified brand of Volvo Cars.

 

(c) Gesamtverband der deutschen Maschenindustrie – GESAMTMASCHE e. V.
29.10.2021

Gesamtmasche: Erholung mit Hindernissen

  • Gestörte Lieferketten und sinkende Margen bremsen das Wachstum  

Nach zaghafter Erholung im Sommer befindet sich die deutsche Maschenindustrie weiter im Aufwärtstrend.  Doch Probleme in der internationalen Logistik und stark gestiegene Rohstoffpreise behindern das Wachstum. „Lieferengpässe und hohe Beschaffungskosten gefährden den Aufschwung. Dazu kommt eine regelrechte Kostenlawine bei den Energiepreisen“, sagt Martina Bandte, Präsidentin von Gesamtmasche. „Dabei haben wir die Belastungen durch den Lockdown noch längst nicht aufgeholt.“

  • Gestörte Lieferketten und sinkende Margen bremsen das Wachstum  

Nach zaghafter Erholung im Sommer befindet sich die deutsche Maschenindustrie weiter im Aufwärtstrend.  Doch Probleme in der internationalen Logistik und stark gestiegene Rohstoffpreise behindern das Wachstum. „Lieferengpässe und hohe Beschaffungskosten gefährden den Aufschwung. Dazu kommt eine regelrechte Kostenlawine bei den Energiepreisen“, sagt Martina Bandte, Präsidentin von Gesamtmasche. „Dabei haben wir die Belastungen durch den Lockdown noch längst nicht aufgeholt.“

Angesichts der Erholung von Umsätzen und Auftragseingängen bleibt der Geschäftsklimaindex der Maschenindustrie zum 4. Quartal mit 14,54 Indexpunkten weiter im positiven Bereich (Indexwert zum 3. Quartal: 16,93). Vor allem aus dem Ausland erwartet die Branche in den kommenden Monaten Impulse. Allerdings klagen die meisten Hersteller über schrumpfende Margen. Über 13 Prozent der Befragten wollen daher, trotz guter Auftragslage, Personal abbauen.
 
Verbandspräsidentin Martina Bandte warnte vor einem Abwürgen der Wirtschaft durch weitere Kostenbelastungen: „Das Wachstum flacht bereits wieder ab, denn die Produktionskosten am Standort und verteuerte Auslandsbeschaffung erodieren die Margen. Nicht nur die international verschobenen Kräfteverhältnisse stellen uns vor immense Herausforderungen. Die neue Regierungskoalition steht vor einem riesigen Reformstau. Der lässt sich nur mit einer wachstumsfreundlichen Politik anpacken. Dazu muss Deutschland aufhören, mit nationalen Maßnahmen globale Fragen lösen zu wollen.“

 

Source:

Gesamtverband der deutschen Maschenindustrie – GESAMTMASCHE e. V.

25.10.2021

TMAS members showcase sustainable finishing technologies

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30th, October 1st and October 7th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.

TMAS: Swedish Group ACG turns 100 (c) Ismail Abdelkareem, ACG Goup
ACG’s Reimar Westerlind and Thomas Arvidsson at the company’s head office in Borås, Sweden
16.08.2021

TMAS: Swedish Group ACG turns 100

It is exactly 100 years ago on August 17th this year that Carl Axel Gustafsson returned from the USA to Sweden with a significant agency agreement from the Boston-based sewing machine leader Reece.

Back in 1921, Reece, along with its competitor Singer, entirely dominated the buttonhole machine market and were the world’s only manufacturers of these machines for jackets, trousers and coats.

Gustafsson’s license enabled his new company A C Gustafsson to become one of Europe’s first leasing organisations, hiring out Reece buttonhole machines and receiving payment per sewn buttonhole stitch.

This business thrived for many decades and formed the basis for the entire ACG Group as it exists today.

Forty years later, on September 2nd 1961 to be precise, Reimar Westerlind walked out of a restaurant after a long and enjoyable lunch with someone he’d never met before, having signed his intention to buy a company he knew nothing about on an improvised contract written on the back of a menu.

It is exactly 100 years ago on August 17th this year that Carl Axel Gustafsson returned from the USA to Sweden with a significant agency agreement from the Boston-based sewing machine leader Reece.

Back in 1921, Reece, along with its competitor Singer, entirely dominated the buttonhole machine market and were the world’s only manufacturers of these machines for jackets, trousers and coats.

Gustafsson’s license enabled his new company A C Gustafsson to become one of Europe’s first leasing organisations, hiring out Reece buttonhole machines and receiving payment per sewn buttonhole stitch.

This business thrived for many decades and formed the basis for the entire ACG Group as it exists today.

Forty years later, on September 2nd 1961 to be precise, Reimar Westerlind walked out of a restaurant after a long and enjoyable lunch with someone he’d never met before, having signed his intention to buy a company he knew nothing about on an improvised contract written on the back of a menu.

“What I didn’t know then was that my dining partner was the family lawyer of Carl Axel Gustafsson,” Reimar explains. “I had no money and knew nothing about the textile industry and I also quickly discovered the business was not doing so well at that time and tried to get out of the agreement, but he insisted I honour it. He told me he had money and would back me, but I’d have to work hard and pay him back in full.”

Reimar certainly took that advice, and at the age of 92 still travels to his office every day to oversee the operations of the diverse companies now operating under the ACG umbrella.

Although textiles remain the bedrock of the business, under Reimar Westerlind’s management, ACG Group has branched out into many other fields of activity over the past 60 years, and its diversity has also led to some highly unexpected developments.

Like many other European manufacturers, ACG also began to expand beyond its traditional borders from the 1970s onwards – initially into the former Soviet Union and subsequently establishing subsidiaries in Estonia, Lithuania, Finland, the Ukraine and Denmark.

14.06.2021

Swedish automation boosts Tritex sewing operations

Founded in 1952, Svegea of Sweden – a member of TMAS, the Swedish textile machinery association – has over 60 years of experience in exclusively designing, manufacturing and installing high quality collarette band cutting machines worldwide.

These are used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements, such as Triteks Trejd.

Founded in 1994, this family-owned business employs over 280 people at its plant in Prilep, North Macedonia, where high quality cotton fabrics are expertly converted into the products of the Tritex Underwear brand.

The Prilep operation encompasses the processing of fabrics, design, cutting, sewing, quality control and packing in a fully integrated workflow.

With around 200 sewing machinists, the Tritex product range encompasses briefs, boxers, slips, t-shirts, pyjamas and body slips which are primarily sold to countries within the European Union, as well as the domestic market.

Founded in 1952, Svegea of Sweden – a member of TMAS, the Swedish textile machinery association – has over 60 years of experience in exclusively designing, manufacturing and installing high quality collarette band cutting machines worldwide.

These are used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements, such as Triteks Trejd.

Founded in 1994, this family-owned business employs over 280 people at its plant in Prilep, North Macedonia, where high quality cotton fabrics are expertly converted into the products of the Tritex Underwear brand.

The Prilep operation encompasses the processing of fabrics, design, cutting, sewing, quality control and packing in a fully integrated workflow.

With around 200 sewing machinists, the Tritex product range encompasses briefs, boxers, slips, t-shirts, pyjamas and body slips which are primarily sold to countries within the European Union, as well as the domestic market.

The company has also just completed the digitalisation of its full production via the in-house DPC-SYS system, installing around 200 industrial PCs linking each of its workstations and departments.

Triteks Trejd currently operates three of the latest Svegea collarette cutting machines and is highly satisfied with their performance, as well as the service provided by the Swedish company.

12.05.2021

Gesamtmasche erweitert das Präsidium

  • Ulrike Neubauer und Gerald Rosner einstimmig kooptiert

Die Mitgliederversammlung von Gesamtmasche hat Dr. Ulrike Neubauer, CFO und Vorstandsvorsitzende der Dr. Zwissler Holding AG (Gerstetten), und Gerald Rosner, Geschäftsführer der strickchic GmbH (Apolda), einstimmig ins Präsidium kooptiert.

Der Beschluss der Mitgliederversammlung, die bereits im April online tagte, wurde nun auch im schriftlichen Verfahren bestätigt: Das Präsidium des Gesamtverbandes der deutschen Maschenindustrie wird um zwei Mitglieder erweitert.

Dr. Ulrike Neubauer ist Vorstandsvorsitzende und Finanzvorstand der Dr. Zwissler Holding AG. Die promovierte Betriebswirtin und gebürtige Berlinerin kam nach Stationen in der Unternehmensberatung, der Chemie-, Maschinenbau und der Automobilzulieferindustrie zur Zwissler-Gruppe.

Gerald Rosner ist Geschäftsführer der strickchic GmbH. Er studierte technische Kybernetik und stieg nach der Reprivatisierung des elterlichen Traditionsbetriebes in Apolda ins Textilgeschäft ein. Neben Mode entwickelt der technikaffine Stricker smarte Textilien.

  • Ulrike Neubauer und Gerald Rosner einstimmig kooptiert

Die Mitgliederversammlung von Gesamtmasche hat Dr. Ulrike Neubauer, CFO und Vorstandsvorsitzende der Dr. Zwissler Holding AG (Gerstetten), und Gerald Rosner, Geschäftsführer der strickchic GmbH (Apolda), einstimmig ins Präsidium kooptiert.

Der Beschluss der Mitgliederversammlung, die bereits im April online tagte, wurde nun auch im schriftlichen Verfahren bestätigt: Das Präsidium des Gesamtverbandes der deutschen Maschenindustrie wird um zwei Mitglieder erweitert.

Dr. Ulrike Neubauer ist Vorstandsvorsitzende und Finanzvorstand der Dr. Zwissler Holding AG. Die promovierte Betriebswirtin und gebürtige Berlinerin kam nach Stationen in der Unternehmensberatung, der Chemie-, Maschinenbau und der Automobilzulieferindustrie zur Zwissler-Gruppe.

Gerald Rosner ist Geschäftsführer der strickchic GmbH. Er studierte technische Kybernetik und stieg nach der Reprivatisierung des elterlichen Traditionsbetriebes in Apolda ins Textilgeschäft ein. Neben Mode entwickelt der technikaffine Stricker smarte Textilien.

Gesamtmasche-Präsidentin Martina Bandte freut sich über die Unterstützung im Präsidium: „Frau Dr. Neubauer und Herrn Rosner bereichern unser Gremium hervorragend. Sie vertreten ganz unterschiedliche Bereiche der Maschenbranche und repräsentieren doch gleichermaßen textile Innovationskraft, Qualität und Wertschöpfung am Standort Deutschland.“