From the Sector

Reset
5729 results
(c) A. Monforts Textilmaschinen GmbH & Co. KG
08.04.2024

Monforts: Launch of coaTTex at Techtextil 2024

At the upcoming Techtextil show for technical textiles, which will take place in Frankfurt from April 23-25, Monforts will launch its new coaTTex coating unit dedicated to air knife and knife-over-roller coating.

For single-sided application with paste or foam, the versatile coaTTex is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts lines, notably the Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and coating, including black-out coating.

The considerable technical textile end-use applications envisaged for the coaTTex range from window blinds to abrasive cloths and from airbags to sails.

With an operational speed of up to 40 metres per minute, coaTTex units are available in nominal widths of between 1800mm to 3600mm and their robust construction is characterised by a rotating beam for the fixation of up to three different knife executions.

At the upcoming Techtextil show for technical textiles, which will take place in Frankfurt from April 23-25, Monforts will launch its new coaTTex coating unit dedicated to air knife and knife-over-roller coating.

For single-sided application with paste or foam, the versatile coaTTex is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts lines, notably the Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and coating, including black-out coating.

The considerable technical textile end-use applications envisaged for the coaTTex range from window blinds to abrasive cloths and from airbags to sails.

With an operational speed of up to 40 metres per minute, coaTTex units are available in nominal widths of between 1800mm to 3600mm and their robust construction is characterised by a rotating beam for the fixation of up to three different knife executions.

Central adjustment of both the horizontal and vertical position of the beam, and also of the knife angle, enables easy adaptation to new projects and automatic tension control guarantees high quality production. In addition, the cleaning blade for the coating roller is pneumatically controlled, as is the lifting of the beam at seams and clamping during fabric standstill.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

08.04.2024

Modeunternehmen Sara Linke GmbH erfolgreich saniert

Das Modeunternehmen „Sara Linke GmbH“ hat wieder eine Zukunft außerhalb der Insolvenz: Die Gläubiger haben einstimmig den Insolvenzplan angenommen und damit den Weg freigemacht für die Aufhebung des Verfahrens. Das Unternehmen wird sich künftig auf die Vermarktung der eigenen Designer-Kollektion „Sara Linke“ konzentrieren sowie Dienstleistungen für Kunden aus der Textil- und Bekleidungsbranche anbieten.

Grundlage für den Sanierungsplan ist eine neue strategische Ausrichtung des Unternehmens: So wird die Sara Linke GmbH künftig keine eigene Produktion mehr unterhalten und sich auf zwei Geschäftsbereiche konzentrieren: Zum einen den Vertrieb des erfolgreichen eigenen Designerlabels „Sara Linke“, das über den Onlineshop www.saralinke.com sowie weitere Online-Plattformen, Boutiquen und Shop-in-Shop-Geschäfte angeboten wird. Die neue Sommerkollektion wird Mitte April an den Start gehen.

Das Modeunternehmen „Sara Linke GmbH“ hat wieder eine Zukunft außerhalb der Insolvenz: Die Gläubiger haben einstimmig den Insolvenzplan angenommen und damit den Weg freigemacht für die Aufhebung des Verfahrens. Das Unternehmen wird sich künftig auf die Vermarktung der eigenen Designer-Kollektion „Sara Linke“ konzentrieren sowie Dienstleistungen für Kunden aus der Textil- und Bekleidungsbranche anbieten.

Grundlage für den Sanierungsplan ist eine neue strategische Ausrichtung des Unternehmens: So wird die Sara Linke GmbH künftig keine eigene Produktion mehr unterhalten und sich auf zwei Geschäftsbereiche konzentrieren: Zum einen den Vertrieb des erfolgreichen eigenen Designerlabels „Sara Linke“, das über den Onlineshop www.saralinke.com sowie weitere Online-Plattformen, Boutiquen und Shop-in-Shop-Geschäfte angeboten wird. Die neue Sommerkollektion wird Mitte April an den Start gehen.

Das zweite Standbein bilden Dienstleistungen rund um Design, Entwicklung und Produktion für Textil- und Bekleidungsunternehmen. Dieser Geschäftsbereich wird künftig unter „Studio 1912“ firmieren. Die neue Homepage ist bereits online, der neue Standort in Zwickau wird am 12. April eröffnet. „Mit der neuen strategischen Ausrichtung können wir unser Design- und Produktions-Know-how Dritten als Dienstleistung zugänglich machen und gleichzeitig unser eigenes erfolgreiches Label für extrovertierte Designermode weiter voranbringen“, so Geschäftsführerin Sara Linke.

Die Sara Linke GmbH hatte im März 2023 ein Insolvenzverfahren in Eigenverwaltung beantragt. Hintergrund waren die Auswirkungen der Corona-Pandemie auf den Textil-Einzelhandel sowie gestiegene Kosten für Material und Personal, die vor allem die Produktion belasteten. Im Zuge des Eigenverwaltungsverfahrens wurde das Unternehmen strategisch neu und mit einer schlankeren Kostenstruktur ausgerichtet.

More information:
Sara Linke GmbH Insolvenz
Source:

Sara Linke GmbH

Bemberg™ and Anita Dongre collaborate for ‘Azure’ Collection (c) Anita Dongre
05.04.2024

Bemberg™ and Anita Dongre collaborate for ‘Azure’ Collection

Bemberg™, a brand of cupro fibre by Asahi Kasei Corporation, Japan, announces its collaboration with luxury couture label Anita Dongre to unveil the ‘Azure’ collection.

Anita Dongre, known for her timeless elegance and commitment to sustainability, has integrated Bemberg™ yarn into the ‘Azure’ collection, symbolizing a dedication to responsible fashion practices. Bemberg™ yarn, sourced from Asahi Kasei in Japan, embodies luxury and environmental responsibility.

The ‘Azure’ collection captures the serene essence of the sea, evoking the tranquil ebb and flow of waves against a backdrop of pristine skies. With soft hues and delicate color palettes, the collection introduces a fresh, breezy aesthetic, featuring flowy dresses, kaftans, and elegant sets designed to elevate the simplicity of spring-summer fashion.

Bemberg™, a brand of cupro fibre by Asahi Kasei Corporation, Japan, announces its collaboration with luxury couture label Anita Dongre to unveil the ‘Azure’ collection.

Anita Dongre, known for her timeless elegance and commitment to sustainability, has integrated Bemberg™ yarn into the ‘Azure’ collection, symbolizing a dedication to responsible fashion practices. Bemberg™ yarn, sourced from Asahi Kasei in Japan, embodies luxury and environmental responsibility.

The ‘Azure’ collection captures the serene essence of the sea, evoking the tranquil ebb and flow of waves against a backdrop of pristine skies. With soft hues and delicate color palettes, the collection introduces a fresh, breezy aesthetic, featuring flowy dresses, kaftans, and elegant sets designed to elevate the simplicity of spring-summer fashion.

More information:
Bemberg™ Asahi Kasei Anita Dongre
Source:

C.L.A.S.S. Eco Hub

Archroma launches ONE WAY+ Photo: Archroma
05.04.2024

Archroma launches ONE WAY+

Archroma launched the ONE WAY+ to help mills and brands to improve their productivity and efficiency, and to reduce their environmental impact.

The program is a three-phase process of establishing the baseline, process design and implementation, and ongoing improvement. Tailor-made for selected customers, it draws on the expertise of a curated team of Archroma processing experts and leverages specialist tools and technologies, including Archroma’s ONE WAY Impact Calculator combined with Sustainability Improvement Program.

Mills that adopt Super Systems+ through the ONE WAY+ process can expect enhanced productivity and reduced resource utilization and utilities costs; in addition, also cleaner chemistry and the co-development of new aesthetics and functionalities. Participation in the ONE WAY+ process also indicates to brand partners that mills are committed to remaining sustainable by adopting global best practices and using products that are compliant with current and future regulatory requirements.

Archroma launched the ONE WAY+ to help mills and brands to improve their productivity and efficiency, and to reduce their environmental impact.

The program is a three-phase process of establishing the baseline, process design and implementation, and ongoing improvement. Tailor-made for selected customers, it draws on the expertise of a curated team of Archroma processing experts and leverages specialist tools and technologies, including Archroma’s ONE WAY Impact Calculator combined with Sustainability Improvement Program.

Mills that adopt Super Systems+ through the ONE WAY+ process can expect enhanced productivity and reduced resource utilization and utilities costs; in addition, also cleaner chemistry and the co-development of new aesthetics and functionalities. Participation in the ONE WAY+ process also indicates to brand partners that mills are committed to remaining sustainable by adopting global best practices and using products that are compliant with current and future regulatory requirements.

Brands that work with Archroma under ONE WAY+ will be supported with a roadmap to their sustainability targets. They will gain a better understanding of the sustainability status of their current suppliers and how this impacts their supply chain. Ultimately, the aim is to optimize efficiencies in the supply chain and connect with suppliers that are able to meet target sustainability commitments.

From base-line audit to results review, ONE WAY+ is usually carried out over 16 weeks, with a team of two or three Archroma experts working closely with the customer’s technical teams. Results achieved so far include the following:

  • A textile mill in China, serving a top international sports and athleisure brand, cut its processing time by 30% while reducing water and steam requirements by 40% and achieving a 10% RFT improvement; and
  • A textile mill in Peru, serving a leading American luxury fashion house, reduced water and steam usage by 20% while slashing processing time by 30%.
  • A textile mill in Argentina, serving casual wear and performance apparel brands, reduced water consumption by 40% and steam usage by 20%
  • A textile mill in India, serving some of the world’s largest homewares brands, improved productivity by 15% while achieving 95% right first time (RFT) processing and 0.5% quality rejection.
More information:
Archroma Sustainability ONE WAY+
Source:

Archroma

Together with Prof. Dr. Klaus Müller, who acts as CFO, Eva Baumann forms the management of the internationally active CHT Group. Photo CHT Group
05.04.2024

Eva Baumann new CEO of the CHT Group

As of April 1, 2024, Eva Baumann takes over the position of CEO in CHT. Together with Prof. Dr. Klaus Müller, who acts as CFO, she forms the management of the internationally active CHT Group.

Until 2020, Eva Baumann had worked for many years in a leading global company in the chemical industry. She has been part of the CHT Group since January 2020 and, as Group Vice President, has headed the Business Field General Industries at Group level. As CEO, Eva Baumann is now responsible for Marketing, Sales, Corporate Strategy, Human Resources and Sustainability.

Eva Baumann has ambitious plans for the future of the CHT Group: "Together with my management team, I will continue to expand the CHT Group as a successful and profitable specialty chemicals group. We focus on what we have been particularly good at for over 70 years: turning innovative ideas into specialty applications. These ideas help our customers to secure their success and at the same time make a sustainable contribution to development. Our customer proximity and the outstanding quality of our products and services set us apart in the market.

As of April 1, 2024, Eva Baumann takes over the position of CEO in CHT. Together with Prof. Dr. Klaus Müller, who acts as CFO, she forms the management of the internationally active CHT Group.

Until 2020, Eva Baumann had worked for many years in a leading global company in the chemical industry. She has been part of the CHT Group since January 2020 and, as Group Vice President, has headed the Business Field General Industries at Group level. As CEO, Eva Baumann is now responsible for Marketing, Sales, Corporate Strategy, Human Resources and Sustainability.

Eva Baumann has ambitious plans for the future of the CHT Group: "Together with my management team, I will continue to expand the CHT Group as a successful and profitable specialty chemicals group. We focus on what we have been particularly good at for over 70 years: turning innovative ideas into specialty applications. These ideas help our customers to secure their success and at the same time make a sustainable contribution to development. Our customer proximity and the outstanding quality of our products and services set us apart in the market.

More information:
CHT Gruppe
Source:

CHT Group

STOLL: Flat knitted balaclava in Design Museum in New York (c) KARL MAYER Group
05.04.2024

STOLL: Flat knitted balaclava in Design Museum in New York

The exhibition “Acquired! Shaping the National Design Collection” at Cooper Hewitt, Smithsonian Design Museum, which opened on 16 March, features a STOLL work that has been part of the museum’s permanent collection since 2017.

Visitors can expect more than 150 works that have been compiled from the museum’s collection and new acquisitions since 2017. The selection, which includes works by design pioneers of the recent past, also includes a highly functional balaclava from STOLL.

Blend of design and functionality.
The flat knitted balaclava from STOLL is part of an exhibition area that visualises the defining themes of our time. Alongside a hijab, it stands for considering inclusivity in design. The balaclava offers protection from extreme cold, is stylish and is the result of a combination of creativity and technology.

The exhibition “Acquired! Shaping the National Design Collection” at Cooper Hewitt, Smithsonian Design Museum, which opened on 16 March, features a STOLL work that has been part of the museum’s permanent collection since 2017.

Visitors can expect more than 150 works that have been compiled from the museum’s collection and new acquisitions since 2017. The selection, which includes works by design pioneers of the recent past, also includes a highly functional balaclava from STOLL.

Blend of design and functionality.
The flat knitted balaclava from STOLL is part of an exhibition area that visualises the defining themes of our time. Alongside a hijab, it stands for considering inclusivity in design. The balaclava offers protection from extreme cold, is stylish and is the result of a combination of creativity and technology.

The balaclava integrates an NFC chip for near-field communication, a heater to warm breathable air, a positive and negative power connector and reflective strips for passive visibility, all knitted directly into the fabric. STOLL’s state-of-the-art flat knitting technology is the basis for straightforward integration. Circuits and conductive yarns can also be incorporated in a fully automated process exactly where they are needed.

Other performance features do not require additional components. A knitted-to-shape 3D design – made possible by the goring technique – offers a perfect fit by following anatomy and eliminating the need for complex tailoring.

More information:
Stoll Karl Mayer Group
Source:

KARL MAYER Group

California’s Largest Sewage Collection Study Photo: INDA
05.04.2024

California’s Largest Sewage Collection Study: Wipes Clogging the Pipes?

In accordance with California’s Proper Labeling of Wet Wipes law (AB 818), state wastewater agencies and industry experts went deep to find out exactly what is passing through—and clogging up—municipal wastewater systems. The Responsible Flushing Alliance (RFA) alongside the California Association of Sanitation Agencies (CASA) and the Association of the Nonwoven Fabrics Industry (INDA) released the results from the largest known domestic sewage collection study conducted to reveal what’s really being flushed down the drain – and shouldn’t be.

“We took a forensic approach to this collection study, engaging industry and wastewater experts to examine our findings and determine what exactly is being flushed and how much of it,” said Adam Link, Executive Director at CASA, a co-sponsor of the Proper Labeling of Wet Wipes Law. “Now that we have the data to see what Californians are flushing and the types of non-flushable items that are causing issues within wastewater systems, local agencies can refine their public outreach and messaging to target specific problems and educate more efficiently.”

In accordance with California’s Proper Labeling of Wet Wipes law (AB 818), state wastewater agencies and industry experts went deep to find out exactly what is passing through—and clogging up—municipal wastewater systems. The Responsible Flushing Alliance (RFA) alongside the California Association of Sanitation Agencies (CASA) and the Association of the Nonwoven Fabrics Industry (INDA) released the results from the largest known domestic sewage collection study conducted to reveal what’s really being flushed down the drain – and shouldn’t be.

“We took a forensic approach to this collection study, engaging industry and wastewater experts to examine our findings and determine what exactly is being flushed and how much of it,” said Adam Link, Executive Director at CASA, a co-sponsor of the Proper Labeling of Wet Wipes Law. “Now that we have the data to see what Californians are flushing and the types of non-flushable items that are causing issues within wastewater systems, local agencies can refine their public outreach and messaging to target specific problems and educate more efficiently.”

Collection and material investigation took place in October 2023 at two locations: Inland Empire Utilities Agency (IEUA) in Southern California and Central Contra Costa Sanitary District (Central San) in the greater San Francisco Bay Area in Northern California. Wastewater and wipes experts collected, sorted and identified more than 1,700 items pulled from the two locations during peak flow times. Kennedy Jenks, an independent engineering firm, designed the study and compiled the findings into the report.

Why Study What’s Being Flushed?
When products that aren’t meant to be flushed down the toilet wind up in the sewer system, it can cause serious threats to public and environmental health. In fact, estimates show that local public agencies throughout California (and the ratepayers they represent) are spending more than $47 million annually to repair wastewater treatment equipment and respond to sewer overflows caused by improper flushing.

“Part of keeping communities healthy requires not flushing things we shouldn’t,” said Lara Wyss, President of the RFA. “However, the data to support which non-flushable items to target as part of education campaigns has been lacking. That’s likely why when we surveyed Californians about what they are flushing, the results revealed that approximately 25% think baby wipes are flushable (which is never true) and 60% self-reported that they flushed something they knew they shouldn’t have.2 Our study results reinforce that finding, as more than 99% of materials collected were items that shouldn’t have been flushed.”

The breakdown of items collected from pipes at the two study locations included:
•    34.1% wipes labeled with the “Do Not Flush” symbol (baby wipes, cleaning wipes, makeup wipes, etc.)
•    64.9% other non-flushable items (paper towels, period products, trash, etc.)
•    0.9% wipes labeled as flushable

“We pulled material larger than 1-inch square directly from the bar screens, and it wasn’t until everything was sorted and identified that we could see what we actually had,” said Matt O’Sickey, Director of Education and Technical Affairs, INDA. “There were a lot of paper towels and baby wipes and all of the ‘Do Not Flush’ labeled wipes we collected were fully intact, showcasing why they should never be flushed.”

What Not to Flush—and How We Tell Consumers
According to the Proper Wet Wipes Labeling law, manufacturers of non-flushable wipes, including products such as baby wipes, cleaning wipes, makeup removal wipes and many others that are primarily used in a bathroom setting must include the “Do Not Flush” symbol on the front of the packaging.
The #FlushSmart consumer education campaign promotes the “Do Not Flush” symbol and provides information on what should and should not be flushed. The message shared with consumers is simple: Look for the “Do Not Flush” symbol on wipes packaging, and if you see it – throw the wipe out. Extrapolating from the results of this study, refraining from flushing “Do Not Flush” labeled wipes, paper products and feminine hygiene products would capture over 90% of items clogging sewers.

Source:

INDA

(c) ITA - RWTH Institut für Textiltechnik
03.04.2024

ITA: Forschungsprojekte zu biobasierten Textilien

Wissenschaftsteams des Instituts für Textiltechnik der RWTH Aachen University (ITA) forschen gemeinsam mit Partnern aus der Industrie und außeruniversitären Forschungseinrichtungen gefördert vom Bundesministerium für Bildung und Forschung (BMBF) an Wegen, die Textilindustrie von fossilen auf biobasierte Rohstoffe, Ausrüstungen sowie neue umweltfreundliche Verfahren umzustellen, um auf diese Weise, die gesamte textile Wertschöpfungskette zu transformieren.

Die Fäden dafür laufen im Innovationsraum BIOTEXFUTURE mit einer Vielzahl an einzelnen Textilforschungsprojekten zusammen. Die enge Verknüpfung von universitärer mit anwendungsnaher Forschung und marktrelevanter Umsetzung mit Wirtschaftsunternehmen soll dazu führen, dass der Textilindustrie die Wende zu einem zukunftsfähigen biobasierten Wirtschaften zielgerichtet gelingen kann.

Wissenschaftsteams des Instituts für Textiltechnik der RWTH Aachen University (ITA) forschen gemeinsam mit Partnern aus der Industrie und außeruniversitären Forschungseinrichtungen gefördert vom Bundesministerium für Bildung und Forschung (BMBF) an Wegen, die Textilindustrie von fossilen auf biobasierte Rohstoffe, Ausrüstungen sowie neue umweltfreundliche Verfahren umzustellen, um auf diese Weise, die gesamte textile Wertschöpfungskette zu transformieren.

Die Fäden dafür laufen im Innovationsraum BIOTEXFUTURE mit einer Vielzahl an einzelnen Textilforschungsprojekten zusammen. Die enge Verknüpfung von universitärer mit anwendungsnaher Forschung und marktrelevanter Umsetzung mit Wirtschaftsunternehmen soll dazu führen, dass der Textilindustrie die Wende zu einem zukunftsfähigen biobasierten Wirtschaften zielgerichtet gelingen kann.

Erste konkrete Ergebnisse ausgewählter Projekte präsentiert BIOTEXFUTURE auf den Gemeinschaftsstand Bioökonomie des BMBF auf der Hannover Messe (22. bis 26.4.2024) sowie auf der fast zeitgleich stattfindenden Internationalen Leitmesse für technische Textilien und Vliesstoffe, Techtextil, in Frankfurt / Main (23. bis 26.4.2024). Folgende Projekte werden vorgestellt:

  • BioTurf: der Kunstrasen der Zukunft ist grün (Hannover Messe / Techtextil)
  • CO2Tex: innovative elastische Garne binden CO2 (Hannover Messe / Techtextil)
  • DegraTex: biologisch abbaubare Geotextilien (Techtextil)
  • BioBase: Textilien für Innenräume, Sport, Auto und Technik werden bio (Hannover Messe / Techtextil)

BioTurf: der Kunstrasen der Zukunft ist grün
Die Forscher*innen des Projekts BioTurf arbeiten an der Lösung eines Problems, mit dem hunderte von Städten und Gemeinden konfrontiert sind. Ziel ist es, eine Kunstrasenstruktur aus Bio-Polyethylen (PE) zu entwickeln, das sich qualitativ nicht von erdölbasiertem PE unterscheidet. Diese Monomaterial-Struktur soll ein hochwertiges Materialrecycling ermöglichen. Eine wichtige Basis für die spätere Kreislaufführung des Produktes. Darüber hinaus wird die neuartige Kunstrasenstruktur ohne die Zugabe von Einstreu-Granulat auskommen und damit das aktuelle Mikroplastik-Problem von Kunstrasenplätzen lösen. Es existiert bereits ein BioTurf-Fußballplatz in Aachen als Demonstrationsspielfeld, auf denen Sportler*innen spielen und trainieren, und dadurch die Forscher*innen regelmäßig Rückmeldung bekommen. Man befindet sich in der Phase der Feinjustierung, um das Ziel zu erreichen den Kunstrasen der Zukunft aus 100% biobasiertem Polyethylen herstellen zu können.

CO2Tex: innovative elastische Garne binden CO2
Die Textilwissenschaftler*innen des BIOTEXFUTURE Projekts CO2Tex entwickeln elastische Filament-Garne, in deren Ausgangsmaterial das für die Erderwärmung mitverantwortliche Treibhausgas CO2 gebunden ist. Gleichzeitig verwenden sie für die Garnherstellung Schmelzspinnprozesse, für die keine giftigen und umweltschädlichen Lösungsmittel notwendig sind. Den Forscher*innen ist es zudem gelungen, die Elastizität der auf thermoplastischen Polyurethanen (TPU) beruhenden Entwicklung für bestimmte Garntypen an das Leistungsvermögen der konventionellen Elastane heranzuschrauben. Das Projekt-Konsortium erwartet, dass für die entwickelten CO2-haltigen elastischen TPU-Filament-Garne eine Hochskalierung der Produktionsprozesse auf eine massentaugliche Fertigung im Industriemaßstab in absehbarer Zeit möglich sein wird. Dabei hält das CO2Tex-Team vergleichbare Herstellungskosten wie bei konventionellen Garnen sowie leichte Vorteile bei der Energiebilanz gegenüber bestehenden Prozessen für möglich.

DegraTex: biologisch abbaubare Geotextilien
Das Ziel von DegraTex ist die Entwicklung biobasierter, abbaubarer Geotextilien für kurzfristige Anwendungen wie die zeitlich begrenzte Sicherung von Erdstrukturen oder für den Vegetationsschutz. Die Materialien erfüllen ihre Funktion, bis sie von natürlichen Komponenten, wie z.B. bodenstabilisierenden oder bodendeckenden Pflanzen, übernommen werden oder simpel einfach nicht mehr benötigt werden. Es geht darum, konventionelle, erdölbasierte Geotextilien in technisch und ökologisch sinnvollem Rahmen durch biobasierte und abbaubare Produktlösungen zu ersetzen. Das Forschungsteam des ITA hat bereits erste Demonstratoren auf Basis von Biopolymeren im Außeneinsatz.

BioBase: Textilien für Innenräume, Sport, Auto und Technik werden bio
Im BioBase-Projekt wird die gesamte textile Wertschöpfungskette der jeweiligen Produkte abgebildet und in jedem Prozessschritt der technologische Reifegrad für die industrielle Produktion von biobasierten und nachhaltigen Chemiefasern schrittweise erhöht. Zunächst entstehen hierbei in Kooperation zwischen den Forschungseinrichtungen und Industriepartner*innen industriell gefertigte Anschauungsmodelle (Demonstratoren), die das Potenzial der am Markt verfügbaren biobasierten Polymere demonstrieren sollen. Die Herstellung der Polymere, Garne und textilen Flächen, orientiert sich sehr anwendungsbezogen an den existierenden technischen Anforderungen in den unterschiedlichen Industrie-Sektoren.
Das Team in Aachen beschäftigt sich mit der Herstellung von Chemiefasergarnen und betrachtet dabei die Arbeitsschritte Schmelzspinnen und Texturieren der Wertschöpfungskette und teilweise auch die Flächenherstellung. Die Forschungen zeigen, dass biobasierte Polymere existieren, die auf bestehenden Anlagen entlang der textilen Prozesskette bis zum Demonstrator verarbeitbar sind, wobei die Garn- und Textileigenschaften je nach Anforderungsprofil angepasst werden können.

Source:

ITA – Institut für Textiltechnik der RWTH Aachen University

Archroma, G-Star RAW and Advance Denim promote cleaner denim production Photo: Advance Denim
03.04.2024

Archroma, G-Star RAW and Advance Denim promote cleaner denim production

With the aim to help the denim industry reduce the environmental impact of its wastewater and move towards circularity, Archroma, G-Star RAW and Advance Denim have renewed their joint commitment to the production of aniline-free denim apparel based on Archroma’s DENISOL® PURE INDIGO 30.

Their joint aim is to produce high-quality denim in authentic blue shades without the aniline impurity carried through from the synthesis of standard synthetic indigo. In traditional denim production, this aniline remains bound with the indigo pigment on the fabric; the remaining aniline is discharged during the dyeing and washing process. This can be a problem because aniline is toxic to aquatic life and two-thirds of aniline waste currently ends up in wastewater discharge where it could potentially pollute waterways and the ocean.

Archroma developed DENISOL® PURE INDIGO 30 to answer this key challenge. A 30% pre-reduced indigo solution, DENISOL® PURE INDIGO 30 makes it possible to produce indigo-dyed denim without aniline impurities throughout the process.

With the aim to help the denim industry reduce the environmental impact of its wastewater and move towards circularity, Archroma, G-Star RAW and Advance Denim have renewed their joint commitment to the production of aniline-free denim apparel based on Archroma’s DENISOL® PURE INDIGO 30.

Their joint aim is to produce high-quality denim in authentic blue shades without the aniline impurity carried through from the synthesis of standard synthetic indigo. In traditional denim production, this aniline remains bound with the indigo pigment on the fabric; the remaining aniline is discharged during the dyeing and washing process. This can be a problem because aniline is toxic to aquatic life and two-thirds of aniline waste currently ends up in wastewater discharge where it could potentially pollute waterways and the ocean.

Archroma developed DENISOL® PURE INDIGO 30 to answer this key challenge. A 30% pre-reduced indigo solution, DENISOL® PURE INDIGO 30 makes it possible to produce indigo-dyed denim without aniline impurities throughout the process.

Easy to use with automated dosing, DENISOL® PURE INDIGO 30 reduces the water needed for preparation, washing and wastewater treatment compared to indigo grains. It also reduces hazardous chemical consumption while allowing high reproducibility and creating the authentic and iconic deep indigo shades traditionally associated with denim.

G-Star RAW is working towards making 20% of its entire collection from Cradle to Cradle Certified® fabrics by 2025. Its partnership with Archroma and Advance Denim contributes to this goal, since the aniline-free DENISOL® holds a Gold Level Material Health Certificate from the Cradle to Cradle Products Innovation Institute. DENISOL® PURE INDIGO 30 is also compliant with other eco-standards and the requirements of leading retailers and brands.

Advance Denim, G-Star RAW and Archroma have previously collaborated to launch collections based on Archroma’s EarthColors® technology, which upcycles plant waste from the herbal industry to create sustainable colorways.

Source:

Archroma

Cavitec: Technology for breathable laminates at Techtextil 2024 (c) Cavitec, Santex Rimar Group
03.04.2024

Cavitec: Technology for breathable laminates at Techtextil 2024

Cavitec, part of Santex Rimar Group, presents the redesigned Caviscreen at Techtextil Frankfurt. Caviscreen features latest technology for breathable laminates.

Caviscreen was developed as a hotmelt coating and laminating unit for breathable sportswear, rainwear and protective clothing – with and without applying a membrane. The redesigned machine shows a brand-new method to supply adhesive more evenly and precisely. Using PUR adhesive (polyurethane reactive adhesive) goes with additional benefits like strong bonding capabilities and versatility.

Caviscreen’s hotmelt screen printing is a special system for high-end application garments. With this Caviscreen system, a PUR adhesive is transferred onto the substrate through a rotary screen, similar to the well-established textile printing method. The adhesives are fed from the drum melter through a heated hose to the traversing adhesive distribution system inside the rotary screen, just behind the doctor blade.

Cavitec, part of Santex Rimar Group, presents the redesigned Caviscreen at Techtextil Frankfurt. Caviscreen features latest technology for breathable laminates.

Caviscreen was developed as a hotmelt coating and laminating unit for breathable sportswear, rainwear and protective clothing – with and without applying a membrane. The redesigned machine shows a brand-new method to supply adhesive more evenly and precisely. Using PUR adhesive (polyurethane reactive adhesive) goes with additional benefits like strong bonding capabilities and versatility.

Caviscreen’s hotmelt screen printing is a special system for high-end application garments. With this Caviscreen system, a PUR adhesive is transferred onto the substrate through a rotary screen, similar to the well-established textile printing method. The adhesives are fed from the drum melter through a heated hose to the traversing adhesive distribution system inside the rotary screen, just behind the doctor blade.

The adhesive is pressed by the doctor blade through the screen holes and transferred to the substrate. Different dot pattern (mesh or irregularly) and different screen thicknesses allow different coating weight and adhesive coverages.

The traversing adhesive dispenser is used to distribute the adhesive automatically over the set working width that – an additional technical benefit – can be set without any mechanical changes.

Cavitec’s screen coating system achieves high bonding strength while using less adhesive than other coating processes, because of applying the coating on the surface of the substrate and like this, the adhesive has less tendency to penetrate the substrate.

Bonding strength, softness of the fabric and the breathability are defined by the coating weight and the coverage. The rotary screen allows users to regulate and adapt the coverage respectively the coating weight. Cavitec offers a large selection of screens that are essential to fulfil the fabric requirements. A further advantage is the ease and efficiency of switching from one screen to another by simply unlocking the bayonet fitting. The IR-heater cover opens pneumatically and the lightweight screen can be easily removed by hand. Unlike with other methods, there's no need to deal with hot oil or any other heated liquid that requires cooling down.

The Caviscreen technology supports manufacturers by reducing costs with screens priced at a mere fraction, just 10%, of common gravure roller prices.

 

Source:

Aepli Communication GmbH

adidas SPZL: Pre-spring 2024 Collection (c) adidas AG
03.04.2024

adidas SPZL: Pre-spring 2024 Collection

First launched in 2014, 2024 marks 10 years since Spezial's inception. Ringing in this landmark anniversary, Gary Aspden and the three stripes chart a course through the label’s past, present, and future – their latest collection telling the timeless story of adidas’ design DNA.

Headlining the collection is the Todmorden Smock. First released in Spring Summer 2021 to an immediate sell out, this season the coveted style returns in two colourways: navy and white. A commemorative 10th anniversary Mod Trefoil tee then brings the Spezial spirit to life as a certified collectors item.  
 
Two lightweight jackets – the Trentham and the Wingrove – constitute spring layering items, while the matching Angelzarke track top and track pants are awash with signature Spezial details. The apparel offering is then rounded out by the Rossendale Short, a Polo shirt, and the Lytham tee.
 
The accessories offering comprises of the Brinscall bag, a Mod Trefoil cap, a two pack of socks, and a Mod Trefoil towel.  

This drop is brought to life by a campaign film featuring actor and musician Ashley Walters.

First launched in 2014, 2024 marks 10 years since Spezial's inception. Ringing in this landmark anniversary, Gary Aspden and the three stripes chart a course through the label’s past, present, and future – their latest collection telling the timeless story of adidas’ design DNA.

Headlining the collection is the Todmorden Smock. First released in Spring Summer 2021 to an immediate sell out, this season the coveted style returns in two colourways: navy and white. A commemorative 10th anniversary Mod Trefoil tee then brings the Spezial spirit to life as a certified collectors item.  
 
Two lightweight jackets – the Trentham and the Wingrove – constitute spring layering items, while the matching Angelzarke track top and track pants are awash with signature Spezial details. The apparel offering is then rounded out by the Rossendale Short, a Polo shirt, and the Lytham tee.
 
The accessories offering comprises of the Brinscall bag, a Mod Trefoil cap, a two pack of socks, and a Mod Trefoil towel.  

This drop is brought to life by a campaign film featuring actor and musician Ashley Walters.

More information:
adidas AG adidas
Source:

adidas AG

INDA remembers CK Wong (c) INDA
03.04.2024

INDA remembers CK Wong

INDA is warmly remembering CK Wong, a veteran of the nonwovens industry for more than five decades and long-time member of INDA’s Board of Directors and Executive Committee. Wong passed away on March 22, 2024 at the age of 86.

Wong recognized the importance of the emerging nonwovens industry in the early 1970s. He began his career in the 1980s as a marketing consultant and, one year later, Wong set up his corporate headquarters in Hong Kong to convert nonwoven roll goods into disposable medical and industrial protection products. Over the past 35 years, Wong’s business grew to include household, beauty salon, sports applications, and other value-added products.

In 1994 Wong’s company officially became U.S. Pacific Nonwovens Industry Limited. His business expanded with a new converting plant in Dongguan, China, and in 2007 he invested in an adjacent building to handle his growing business. In 2018 Wong’s business broadened to include manufacturing PLA nonwovens. In addition to converted products, Wong’s business provided sales, service, and training for nonwovens equipment.

INDA is warmly remembering CK Wong, a veteran of the nonwovens industry for more than five decades and long-time member of INDA’s Board of Directors and Executive Committee. Wong passed away on March 22, 2024 at the age of 86.

Wong recognized the importance of the emerging nonwovens industry in the early 1970s. He began his career in the 1980s as a marketing consultant and, one year later, Wong set up his corporate headquarters in Hong Kong to convert nonwoven roll goods into disposable medical and industrial protection products. Over the past 35 years, Wong’s business grew to include household, beauty salon, sports applications, and other value-added products.

In 1994 Wong’s company officially became U.S. Pacific Nonwovens Industry Limited. His business expanded with a new converting plant in Dongguan, China, and in 2007 he invested in an adjacent building to handle his growing business. In 2018 Wong’s business broadened to include manufacturing PLA nonwovens. In addition to converted products, Wong’s business provided sales, service, and training for nonwovens equipment.

Wong was an active member at INDA since the late 90s. He served as Vice Chair of Finance on the Board of Directors for many years before becoming an Appointee on INDA’s Executive Committee. Wong was instrumental in helping INDA set up partnerships with key contacts and associations in China. He was also the Honorable Chairman for the Guangdong Nonwovens Association (GDNA) and the China Nonwovens & Industrial Textiles Association (Spunbond Division).

More information:
INDA nonwovens
Source:

INDA, the Association of the Nonwoven Fabrics Industry

03.04.2024

Trützschler: Holistic approach to textile recycling

Trützschler expanded their portfolio to become the first full-liner in the preparation of textile waste – from mechanical recycling to the spinning preparation of torn secondary fibers.

The TRUECYCLED solution is the result of their cooperation with the company Balkan Textile Machinery INC.CO. in Turkey, which they announced at the ITMA 2023 trade event in Milan. Since then, Trützschler has received many inquiries for recycling systems.

Trützschler expanded their portfolio to become the first full-liner in the preparation of textile waste – from mechanical recycling to the spinning preparation of torn secondary fibers.

The TRUECYCLED solution is the result of their cooperation with the company Balkan Textile Machinery INC.CO. in Turkey, which they announced at the ITMA 2023 trade event in Milan. Since then, Trützschler has received many inquiries for recycling systems.

Success with a systems approach
Recycling systems face significant technological challenges. On average, torn fibers are much shorter than virgin fibers. The percentage share of short fibers in the fiber mass is much higher. Unopened yarn and fabric particles are also difficult to process. Not surprisingly, much academic and practical research is currently conducted to find solutions for these problems. Dr. Georg Stegschuster, a researcher specializing in textile recycling, believes a systems approach is needed. He is working at the Recycling atelier, a model factory for mechanical recycling in Augsburg, Germany, which is committed to delivering the latest technological insights for textile recycling. “A perfect fine-tuning between tearing and spinning preparation is key for obtaining the best possible quality results and avoiding unnecessary fiber shortening,” he says. “This can be achieved if you are in control of both processes – and have the necessary expertise for both processes too.”

Gentle but effective
In some cases, for example, it may be advantageous to have less aggressive settings in the tearing line. This can help avoid unnecessary fiber shortening. The remaining higher share of unopened fabric must then be handled in a high-performance spinning preparation line. This starts with the right blow room configuration for perfect opening, cleaning and blending. A card that is specially designed for recycling materials, such as the new TC 30Ri, can also enable gentle but effective treatment of fibers.

A shortened drafting process is also a must. The integrated draw frame IDF 3 can make this possible. The draft is high enough to provide excellent levelling of the numerous short fibers, but low enough to prevent floating fibers.

Full-liner in mechanical recycling and preparation of textile waste
Trützschler now offers a complete system covering the whole process, from cutting and tearing textile waste through to carding and drawing secondary fibers. Thanks to this holistic approach and Trützschler’s expertise for the whole process, manufacturers can avoid unnecessary fiber shortening.

Source:

Trützschler Group

03.04.2024

EURATEX: 3rd project addressing shortage of qualified labour

The association has launched another initiative to promote upskilling and reskilling in the textiles, clothing, leather and footwear industry: the “TCLF SkillBridge” project will focus on establishing regional skills partnerships.

In the context of the EU TCLF Pact for Skills, EURATEX will work together with CEC  and COTANCE  to support the creation of regional partnerships in the area skills; this new SkillBridge project, supported by the European Commission DG GROW, will specifically help to develop action plans with regional authorities, local TCLF industry and education providers. These action plans should respond to the changing needs of the TCLF industry in the area of education and skills. The project will also offer a mobility scheme for regional stakeholders from the industry and offer support to SMEs, to help them develop reskilling or upskilling initiatives in their company.

The association has launched another initiative to promote upskilling and reskilling in the textiles, clothing, leather and footwear industry: the “TCLF SkillBridge” project will focus on establishing regional skills partnerships.

In the context of the EU TCLF Pact for Skills, EURATEX will work together with CEC  and COTANCE  to support the creation of regional partnerships in the area skills; this new SkillBridge project, supported by the European Commission DG GROW, will specifically help to develop action plans with regional authorities, local TCLF industry and education providers. These action plans should respond to the changing needs of the TCLF industry in the area of education and skills. The project will also offer a mobility scheme for regional stakeholders from the industry and offer support to SMEs, to help them develop reskilling or upskilling initiatives in their company.

The TCLF SkillBridge project complements the MetaSkills and Aequalis projects, which have been launched earlier this year. They all share the same objectives which have been established in the TCLF Pact for Skills, and thus contribute to addressing one of the most critical bottlenecks which is faced by the TCLF industry: the shortage of qualified labour. These 3 projects will, collectively, allow EURATEX and its partners to work with all relevant stakeholders from our sector across the EU and beyond.

Dirk Vantyghem, EURATEX Director General, welcomes these initiatives to support the TCLF industries: “Addressing the skills gap, and attracting young people with the right set of skills, is essential to strengthen the European textiles industry. We are grateful to the European Commission to offer the necessary support, and want to reach out especially to the regional authorities, to work together and design a skills strategy that works for its local TCLF industry.”

Source:

Euratex

Bremer Baumwollbörse Foto: Bremer Baumwollbörse, Fotograf Carsten Heidmann
03.04.2024

37. International Cotton Conference Bremen mit 400 Teilnehmern

Rund 400 Teilnehmer aus knapp 40 Ländern verfolgten vom 20. bis 22. März die 37. International Cotton Conference Bremen. Vor Ort und auch online konnten elf Sessions mit knapp 70 Referenten besucht werden, die über die neuesten Forschungsergebnisse und innovative Praxisanwendung in der Baumwollbranche informierten.

Zu den Höhepunkten zählten die Keynote-Sessions, die den jeweiligen Konferenztag einläuteten. Colin Iles, Executive Manager Cotton & Sugar bei Viterra, stimmte die Teilnehmer durch einen umfassenden Ausblick auf die aktuelle Entwicklung an den Rohstoffmärkten mit Auswirkungen auf die Baumwolle ein.

Mit dem Fokus auf die anstehenden gesetzgeberischen Regulierungen und deren gravierenden Folgen für die gesamte Branche sorgte die Analystin Veronica Bates Kassatly für Diskussionsstoff. Ergänzend kamen dann praxisnahe Empfehlungen der Commerzbank-Vertreter Manuel Höchemer und Lennert van Mens. Sie zeigten Möglichkeiten auf, wie Unternehmen in der Europäischen Union neue Regelungen zur Nachhaltigkeitsberichterstattung navigieren können.

Rund 400 Teilnehmer aus knapp 40 Ländern verfolgten vom 20. bis 22. März die 37. International Cotton Conference Bremen. Vor Ort und auch online konnten elf Sessions mit knapp 70 Referenten besucht werden, die über die neuesten Forschungsergebnisse und innovative Praxisanwendung in der Baumwollbranche informierten.

Zu den Höhepunkten zählten die Keynote-Sessions, die den jeweiligen Konferenztag einläuteten. Colin Iles, Executive Manager Cotton & Sugar bei Viterra, stimmte die Teilnehmer durch einen umfassenden Ausblick auf die aktuelle Entwicklung an den Rohstoffmärkten mit Auswirkungen auf die Baumwolle ein.

Mit dem Fokus auf die anstehenden gesetzgeberischen Regulierungen und deren gravierenden Folgen für die gesamte Branche sorgte die Analystin Veronica Bates Kassatly für Diskussionsstoff. Ergänzend kamen dann praxisnahe Empfehlungen der Commerzbank-Vertreter Manuel Höchemer und Lennert van Mens. Sie zeigten Möglichkeiten auf, wie Unternehmen in der Europäischen Union neue Regelungen zur Nachhaltigkeitsberichterstattung navigieren können.

Nicolas Rubio berichtete in seiner Funktion als Agricultural Counselor bei der Botschaft der Vereinigten Staaten in Berlin über seine Erfahrung in der europäischen Politik. Hubertus Lohner, Airbus Operations in Bremen und Leiter des Technologiezentrums ECOMAT präsentierte Möglichkeiten, wie der Einsatz von Naturfasern zur Dekarbonisierung des Mobilitätssektors – im Speziellen im Flugzeugbau – beitragen kann.

Paneldiskussion mit Fokus Vietnam
Unter der Headline ‚Region in Focus‘ warf die Session mit Fokus auf die vietnamesische Baumwoll- und Textilindustrie ein Schlaglicht auf die Branche. Thuy Vi Nguyen vom vietnamesischen Baumwoll- und Spinnereiverband VCOSA, Yen Tracy Mai, Präsidentin und CEO Long Van Yarn Ltd sowie Graham Soley, Analyst des USDA, ebneten den Weg für eine lebhafte Diskussion unter den Vertretern und Experten der vietnamesischen Textilbranche.

Nachhaltigkeit als Querschnittsthema
Das Thema Nachhaltigkeit ist mittlerweile mit den vielfältigen Bereichen in der Lieferkette so verwoben, dass es als Querschnittsthema mitgedacht werden muss. So fanden sich in nahezu allen Sessions zu den Themen entlang der Baumwolllieferkette Aspekte des breitgefächerten Nachhaltigkeitsbereiches.

Hervorzuheben ist dabei die Forschungsarbeit von Filipe Natalio, mit dem Ziel, die den natürlichen Organismen zugrunde liegenden Mechanismen zu verstehen, um so biologische Materialien wie Baumwolle mit besonderen - nachhaltigen - Eigenschaften herzustellen. Weitere Beiträge waren die Vorträge ‚Umweltauswirkungen von Baumwollanbausystemen‘ von Jens Soth, Helvetas, oder ‚Textilien auf dem Weg zur Kreislaufwirtschaft‘ von Stefan Schlichter, Technische Hochschule Augsburg. Zudem griff die Konferenz Fragen zu Traceability und Transparenz sowie dem Einfluss klimatischer Veränderungen und gerechter Einkommen auf das Leben der Baumwollfarmer auf.

Schwerpunkt Recycling
Im Fokus des Themas Recycling stand die Qualität der Baumwollfaser im Recyclingprozess. In der Diskussion wurde deutlich, welche Chancen, aber auch Herausforderungen in der Wiederverwertung der Naturfaser bestehen. Das Thema Recycling stand ebenfalls auf der Tagesordnung des Spinning & Textile Seminars im Vorfeld der Tagung, zu dem die vier Organisatoren Bremer Baumwollbörse, Bremer Faserinstitut (FIBRE), Internationaler Verband der Textilindustrie (ITMF) und der Industrieverband Garne und Textilien (IVGT) erneut eingeladen hatten. Unter dem Titel ‚Einsatz und Herausforderung von Fasern in textilen Recyclingsystemen‘ beleuchteten Sprecher aus der Textilindustrie die Recycling-Wertschöpfungskette von der Sortierung der Altkleider bis zum neuen Produkt aus praktischer Sicht.

Die 38. International Cotton Conference Bremen findet 2026 statt.

 

Texoversum Foto Hochschule Reutlingen
03.04.2024

Texoversum ausgezeichnet

Das Gebäude TEXOVERSUM der Hochschule Reutlingen wurde beim Deutschen Hochschulbaupreis 2024 in Berlin ausgezeichnet. Eine weitere Auszeichnung ging an die Technische Universität Braunschweig für das dortige Studierendenhaus. Beide Auszeichnungen erhalten jeweils 5.000 Euro. Den mit 15.000 Euro dotierten Deutschen Hochschulbaupreis 2024 erhielt der Umbau des Fritz-Foerster-Baus der Technischen Universität Dresden.

Das TEXOVERSUM wurde von Südwesttextil e.V. an das Land Baden-Württemberg für den Campus der Hochschule Reutlingen gespendet. Seit Beginn des Sommersemesters im März diesen Jahres ist die TEXOVERSUM Fakultät Textil nach knapp drei Jahren Bauzeit Nutzer des Gebäudes.

Das durch das Architektenbüro allmannwappner in Kooperation mit Menges Scheffler Architekten und Jan Knippers Ingenieure geplante und realisierte TEXOVERSUM beindruckt nicht nur die Jury des Deutschen Baupreises durch die innovative, identitätsstiftende und einzigartige Fassade. „[…] Vor allem der experimentelle Ansatz in der Fassade als Beispiel für das sichtbar machen der Arbeit in Forschung und Lehre ist hier beispielhaft umsetzt.“, so ein Auszug aus der Jurybegründung.

Das Gebäude TEXOVERSUM der Hochschule Reutlingen wurde beim Deutschen Hochschulbaupreis 2024 in Berlin ausgezeichnet. Eine weitere Auszeichnung ging an die Technische Universität Braunschweig für das dortige Studierendenhaus. Beide Auszeichnungen erhalten jeweils 5.000 Euro. Den mit 15.000 Euro dotierten Deutschen Hochschulbaupreis 2024 erhielt der Umbau des Fritz-Foerster-Baus der Technischen Universität Dresden.

Das TEXOVERSUM wurde von Südwesttextil e.V. an das Land Baden-Württemberg für den Campus der Hochschule Reutlingen gespendet. Seit Beginn des Sommersemesters im März diesen Jahres ist die TEXOVERSUM Fakultät Textil nach knapp drei Jahren Bauzeit Nutzer des Gebäudes.

Das durch das Architektenbüro allmannwappner in Kooperation mit Menges Scheffler Architekten und Jan Knippers Ingenieure geplante und realisierte TEXOVERSUM beindruckt nicht nur die Jury des Deutschen Baupreises durch die innovative, identitätsstiftende und einzigartige Fassade. „[…] Vor allem der experimentelle Ansatz in der Fassade als Beispiel für das sichtbar machen der Arbeit in Forschung und Lehre ist hier beispielhaft umsetzt.“, so ein Auszug aus der Jurybegründung.

Im architektonisch anspruchsvollen Gebäude kommen Studierende, Auszubildende sowie Industrie und Forschung zusammen, um die Textil- und Bekleidungsindustrie gemeinsam zu gestalten. Auf knapp 3.000 Quadratmeter ist Platz für hochmoderne Werkstätten und Labore, die international renommierte und einzigartige Gewebesammlung der Hochschule Reutlingen sowie Think-Tank-Flächen und Unterrichtsräume.

Der Deutsche Hochschulbaupreis wurde von der Deutschen Universitätsstiftung (DUS) unter der Schirmherrschaft des Bundesministeriums für Wohnen, Stadtentwicklung und Bauwesen zum siebten Mal ausgelobt. Die Auszeichnung unterstützt die Eberhard-Schöck-Stiftung mit einem Preisgeld in einer Gesamthöhe von 25.000 Euro. Um den Preis hatten sich 18 Hochschulen aus zehn Bundesländern mit 20 Projekten beworben.

Zum Tag der offenen Tür der Hochschule Reutlingen am 04. Mai 2024 wird das TEXOVERSUM erstmals in Teilen für die interessierte Öffentlichkeit zugänglich sein.

More information:
Texoversum Hochschule Reutlingen
Source:

Hochschule Reutlingen

Winner of Cellulose Fibre Innovation Award 2024 (c) nova-Institute
Winner of Cellulose Fibre Innovation Award 2024
27.03.2024

Winner of Cellulose Fibre Innovation Award 2024

The “Cellulose Fibres Conference 2024” held in Cologne on 13-14 March demonstrated the innovative power of the cellulose fibre industry. Several projects and scale-ups for textiles, hygiene products, construction and packaging showed the growth and bright future of this industry, supported by the policy framework to reduce single-use plastic products, such as the Single Use Plastics Directive (SUPD) in Europe.

The “Cellulose Fibres Conference 2024” held in Cologne on 13-14 March demonstrated the innovative power of the cellulose fibre industry. Several projects and scale-ups for textiles, hygiene products, construction and packaging showed the growth and bright future of this industry, supported by the policy framework to reduce single-use plastic products, such as the Single Use Plastics Directive (SUPD) in Europe.

40 international speakers presented the latest market trends in their industry and illustrated the innovation potential of cellulose fibres. Leading experts introduced new technologies for the recycling of cellulose-rich raw materials and gave insights into circular economy practices in the fields of textiles, hygiene, construction and packaging. All presentations were followed by exciting panel discussions with active audience participation including numerous questions and comments from the audience in Cologne and online. Once again, the Cellulose Fibres Conference proved to be an excellent networking opportunity to the 214 participants and 23 exhibitors from 27 countries. The annual conference is a unique meeting point for the global cellulose fibre industry.  

For the fourth time, nova-Institute has awarded the “Cellulose Fibre Innovation of the Year” Award at the Cellulose Fibres Conference. The Innovation Award recognises applications and innovations that will lead the way in the industry’s transition to sustainable fibres. Close race between the nominees – “The Straw Flexi-Dress” by DITF & VRETENA (Germany), cellulose textile fibre from unbleached straw pulp, is the winning cellulose fibre innovation 2024, followed by HONEXT (Spain) with the “HONEXT® Board FR-B (B-s1, d0)” from fibre waste from the paper industry, while TreeToTextile (Sweden) with their “New Generation of Bio-based and Resource-efficient Fibre” won third place.

Prior to the event, the conference advisory board had nominated six remarkable innovations for the award. The nominees were neck and neck, when the winners were elected in a live vote by the audience on the first day of the conference.

First place
DITF & VRETENA (Germany): The Straw Flexi-Dress – Design Meets Sustainability

The Flexi-Dress design was inspired by the natural golden colour and silky touch of HighPerCell® (HPC) filaments based on unbleached straw pulp. These cellulose filaments are produced using environmentally friendly spinning technology in a closed-loop production process. The design decisions focused on the emotional connection and attachment to the HPC material to create a local and circular fashion product. The Flexi-Dress is designed as a versatile knitted garment – from work to street – that can be worn as a dress, but can also be split into two pieces – used separately as a top and a straight skirt. The top can also be worn with the V-neck front or back. The HPC textile knit structure was considered important for comfort and emotional properties.

Second place
Honext Material (Spain): HONEXT® Board FR-B (B-s1, d0) – Flame-retardant Board made From Upcycled Fibre Waste From the Paper Industry

HONEXT® FR-B board (B-s1, d0) is a flame-retardant board made from 100 % upcycled industrial waste fibres from the paper industry. Thanks to innovations in biotechnology, paper sludge is upcycled – the previously “worthless” residue from paper making – to create a fully recyclable material, all without the use of resins. This lightweight and easy-to-handle board boasts high mechanical performance and stability, along with low thermal conductivity, making it perfect for various applications in all interior environments where fire safety is a priority. The material is non-toxic, with no added VOCs, ensuring safety for both people and the planet. A sustainable and healthy material for the built environment, it achieves Cradle-to-Cradle Certified GOLD, and Material Health CertificateTM Gold Level version 4.0 with a carbon-negative footprint. Additionally, the product is verified in the Product Environmental Footprint.

Third Place
TreeToTextile (Sweden): A New Generation of Bio-based and Resource-efficient Fibre

TreeToTextile has developed a unique, sustainable and resource efficient fibre that doesn’t exist on the market today. It has a natural dry feel similar to cotton and a semi-dull sheen and high drape like viscose. It is based on cellulose and has the potential to complement or replace cotton, viscose and polyester as a single fibre or in blends, depending on the application.
TreeToTextile Technology™ has a low demand for chemicals, energy and water. According to a third party verified LCA, the TreeToTextile fibre has a climate impact of 0.6 kg CO2 eq/kilo fibre. The fibre is made from bio-based and traceable resources and is biodegradable.

The next conference will be held on 12-13 March 2025.

Source:

nova-Institut für politische und ökologische Innovation GmbH

27.03.2024

KARL MAYER GROUP at SaigonTex 2024

At the upcoming SaigonTex, taking place from April 10th to 13th in Ho Chi Minh City, the KARL MAYER GROUP will present its innovations.

DThe KARL MAYER exhibition for warp preparation is entirely dedicated to sustainability. With BLUEDYE, an innovative machine is introduced, which ensures more sustainability and lower costs in the process of indigo dyeing. Thanks to innovative technological solutions, the amounts of water and chemicals used are significantly reduced. Additionally, less yarn waste is generated. Another innovation for more sustainability is CASCADE, a steam and condensation system that requires significantly less steam in the drying process of sizing and indigo dyeing plants by using a solution for energy recycling that is protected against imitation.

For the warp knitting sector, the group of companies presents its latest technological developments. Highlights include a digital solution from KM.ON for optimizing production management (DPM), innovations for enhancing performance in the HKS segment, and a double raschel machine that enables unique creative multi-color designs in spacer textiles with more colour and new Jacquard techniques.

At the upcoming SaigonTex, taking place from April 10th to 13th in Ho Chi Minh City, the KARL MAYER GROUP will present its innovations.

DThe KARL MAYER exhibition for warp preparation is entirely dedicated to sustainability. With BLUEDYE, an innovative machine is introduced, which ensures more sustainability and lower costs in the process of indigo dyeing. Thanks to innovative technological solutions, the amounts of water and chemicals used are significantly reduced. Additionally, less yarn waste is generated. Another innovation for more sustainability is CASCADE, a steam and condensation system that requires significantly less steam in the drying process of sizing and indigo dyeing plants by using a solution for energy recycling that is protected against imitation.

For the warp knitting sector, the group of companies presents its latest technological developments. Highlights include a digital solution from KM.ON for optimizing production management (DPM), innovations for enhancing performance in the HKS segment, and a double raschel machine that enables unique creative multi-color designs in spacer textiles with more colour and new Jacquard techniques.

"Vietnam is a growing market for textile production, which is gaining importance especially for major international sports brands," says Eddy Ho, Senior Sales Manager at KARL MAYER.
The sales professional expects a large number of visitors, especially from Vietnam, China, Taiwan, and South Korea. SaigonTex is one of the most important textile machinery exhibitions in East Asia, located in close proximity to production centres. Vietnam is, in turn, the second most important market for the KARL MAYER GROUP after China. It benefits from increasing foreign direct investments in textile production from China, Taiwan, and South Korea.

Source:

KARL MAYER GROUP

Green Theme Technologies
27.03.2024

Green Theme Technologies partners with Hwasung International

Green Theme Technologies, suppliers of the EMPEL® water-free and PFAS-free textile finishing platform, continues a trajectory of exponential growth by partnering with Korean-based global textile innovator Hwasung International. Hwasung is the first Korean mill to offer the EMPEL® high performance technology to global footwear brands and regional Korean mill customers.
      
Known globally for providing high performance textiles that incorporate functional yarns such as Dyneema, Kevlar and Cordura, Hwasung will now broaden their high performance and sustainable offerings by scaling EMPEL into their global supply chain.
      
Green Theme’s EMPEL® platform can be applied successfully to a wide range of synthetic knit, woven, non-woven and novel fabrics that are traditionally hard to treat. The diverse list of EMPEL® markets include: Outdoor, High Fashion, Footwear, Automotive, Furniture, Workwear, Athleisure Wear and Military. Because no water is used during the treatment application, EMPEL® can remove pollution and waste from any textile manufacturing process.

Green Theme Technologies, suppliers of the EMPEL® water-free and PFAS-free textile finishing platform, continues a trajectory of exponential growth by partnering with Korean-based global textile innovator Hwasung International. Hwasung is the first Korean mill to offer the EMPEL® high performance technology to global footwear brands and regional Korean mill customers.
      
Known globally for providing high performance textiles that incorporate functional yarns such as Dyneema, Kevlar and Cordura, Hwasung will now broaden their high performance and sustainable offerings by scaling EMPEL into their global supply chain.
      
Green Theme’s EMPEL® platform can be applied successfully to a wide range of synthetic knit, woven, non-woven and novel fabrics that are traditionally hard to treat. The diverse list of EMPEL® markets include: Outdoor, High Fashion, Footwear, Automotive, Furniture, Workwear, Athleisure Wear and Military. Because no water is used during the treatment application, EMPEL® can remove pollution and waste from any textile manufacturing process.

Source:

Green Theme Technologies

BOGNER: Golf-Kollektion mit Bernhard Langer (c) Willy BOGNER GmbH
Golflegende Bernhard Langer
27.03.2024

BOGNER: Golf-Kollektion mit Bernhard Langer

Seit mehr als vier Jahrzehnten verbindet BOGNER eine Partnerschaft mit der Golflegende Bernhard Langer. Diese Zusammenarbeit wird mit der Golf Capsule Collection "The Masterclass" für die Spring/Summer 2024 Saison auf ein neues Niveau gehoben.

Die BOGNER Bernhard Langer Masterclass garantiert optimale Bewegungsfreiheit und maximale Performance auf dem Green, ausgewählt und getestet von Bernhard Langer. Die Golfstyles für Herren sorgen für luxuriösen Komfort und lockere Silhouetten.

Seit mehr als vier Jahrzehnten verbindet BOGNER eine Partnerschaft mit der Golflegende Bernhard Langer. Diese Zusammenarbeit wird mit der Golf Capsule Collection "The Masterclass" für die Spring/Summer 2024 Saison auf ein neues Niveau gehoben.

Die BOGNER Bernhard Langer Masterclass garantiert optimale Bewegungsfreiheit und maximale Performance auf dem Green, ausgewählt und getestet von Bernhard Langer. Die Golfstyles für Herren sorgen für luxuriösen Komfort und lockere Silhouetten.

Source:

Willy BOGNER GmbH