From the Sector

Reset
855 results
28.04.2023

ANDRITZ: Outlook for the full year 2023

International technology group ANDRITZ has started the 2023 business year with unchanged high growth dynamics despite a slowing global economy. Revenue and operating result both increased significantly by well over 20 percent in the first quarter of 2023 compared with the same period of the previous year. Net income improved by almost 50 percent to 104.5 million euros (MEUR). Order intake reached a favorable level of 2.4 billion euros but was 6.5 percent below the figure for the first quarter of 2022, when the booking of two large-scale orders had provided a peak.

The key financial figures developed as follows during the reporting period:

International technology group ANDRITZ has started the 2023 business year with unchanged high growth dynamics despite a slowing global economy. Revenue and operating result both increased significantly by well over 20 percent in the first quarter of 2023 compared with the same period of the previous year. Net income improved by almost 50 percent to 104.5 million euros (MEUR). Order intake reached a favorable level of 2.4 billion euros but was 6.5 percent below the figure for the first quarter of 2022, when the booking of two large-scale orders had provided a peak.

The key financial figures developed as follows during the reporting period:

  • Order intake amounted to 2,420.2 MEUR and was thus 6.5% below the high level of the previous year’s reference period (Q1 2022: 2,588.6 MEUR), which included two large-scale orders. The Metals business area was able to increase its order intake significantly compared to the previous year’s reference period.
  • The order backlog as of March 31, 2023 amounted to 10,407.8 MEUR and has thus increased compared to 2022 (December 31, 2022: 9,976.5 MEUR).
  • Revenue at 1,962.6 MEUR was 28.5% higher than the reference figure for the previous year’s reference period (Q1 2022: 1,526.9 MEUR). All four business areas were able to significantly increase their revenue compared to the previous year.
  • The operating result (EBITA) increased in line with revenue, reaching a very favorable level at 158.5 MEUR in the first quarter of 2023 (+29.6% versus Q1 2022: 122.3 MEUR). The Group’s profitability (EBITA margin) increased slightly to 8.1% (Q1 2022: 8.0%).
  • Net income (without non-controlling interests) increased significantly to 104.5 MEUR (Q1 2022: 71.5 MEUR).

Following the successful first quarter, ANDRITZ confirms its previously published outlook for the full year 2023. Both revenue and earnings for the full year are expected to be above the level of 2022.

More information:
Andritz financial year 2023
Source:

ANDRITZ AG

Photo: EREMA/Wakolbinger
Manfred Hackl, CEO EREMA Group GmbH
28.04.2023

EREMA Group ends financial year 2022/23

Around EUR 355 million in overall turnover, 350 extruders delivered creating an additional recycling capacity for 1.6 million tons of recycled pellets as a result - these are the figures with which the EREMA Group was able to close the 2022/23 financial year in March.

"With demand for recycled plastics remaining high, the past financial year brought many challenges that we needed to handle," says Manfred Hackl, CEO of EREMA Group GmbH. The challenges included persistent delays in the supply chain and unexpected supplier outages. Logistics and production processes had to be adapted several times as a result. The situation has improved significantly meantime as a result of these measures and more stable supply chains.

Around EUR 355 million in overall turnover, 350 extruders delivered creating an additional recycling capacity for 1.6 million tons of recycled pellets as a result - these are the figures with which the EREMA Group was able to close the 2022/23 financial year in March.

"With demand for recycled plastics remaining high, the past financial year brought many challenges that we needed to handle," says Manfred Hackl, CEO of EREMA Group GmbH. The challenges included persistent delays in the supply chain and unexpected supplier outages. Logistics and production processes had to be adapted several times as a result. The situation has improved significantly meantime as a result of these measures and more stable supply chains.

The production locations in Austria manufactured 270 extruders and delivered them to customers around the globe. Taking the whole group into consideration, this figure rises to 350 including the extruders from PLASMAC, the Italian subsidiary. The recycled pellet production capacity of all extrusion systems delivered in financial year 2022/23 adds up to around 1.6 million tonnes per year. On top of that there are around 130 additional components and modules such as filter systems and ReFresher anti-odour units.

Recycling innovations for high-quality pellets
K 2022 - the highlight trade fair of the past financial year - saw the EREMA Group launch seven
new recycling systems and components. These included the new INTAREMA® TVEplus® DuaFil® Compact recycling system and the EcoGentle® plasticising unit, which was also newly developed. Thanks to their gentle polymer treatment and significantly lower melt temperature, both extrusion innovations deliver effective advantages in terms of the quality of the melt, recycled pellets, and final product, as well as impressive energy efficiency in post consumer and PET recycling applications. The significance of these innovations for plastics recycling is underlined by the nomination of the DuaFil® Compact technology for one of this year's Plastics Recycling Awards Europe in the category Recycling Machinery Innovation of the Year.
The same applies to the READYMAC 1109 TVE machine made to stock by EREMA Group subsidiary UMAC, as well as to the new ALPHA XS edge trim recycling machine for the inhouse recycling segment made by PLASMAC. The market launch of the deinking system presented at K 2022 by the EREMA Group company KEYCYCLE delivering a throughput of 1,200 kilograms per hour has been a success, as has the commissioning of a further unit sold to a film manufacturer.

40 years of EREMA
The beginning of the new financial year falls almost to the day on EREMA's 40th anniversary. On 14 April 1983, Helmut Bacher, Helmuth Schulz and Georg Wendelin founded EREMA Engineering Recycling Maschinen und Anlagen GesmbH, laying the foundation for the 40-year success story. In celebration, the comapny will hold the event EREMA Discovery Day at the company headquarters on the 1st of June. This event with live insights into the latest post consumer and PET recycling technologies will also see the official opening of the newly built research and development centre.

Source:

EREMA Group GmbH

26.04.2023

STFI: Bionanopolis Open Call to support companies

The international association that will manage the Single-Entry-Point (SEP) of the BIONANOPOLYS project has been formally constituted and will be able to support companies across the European Union in the market introduction of bionanomaterials through technical, legal, regulatory, safety, economic and financial support services.

The SEP was established as an AISBL (non-profit entity) on 17 February 2023 in the framework of the European project BIONANOPOLYS, funded by the Horizon 2020 programme. The technical director of ITENE and coordinator of this project, Carmen Sánchez, is the president of this association in which representatives of other project partners also act as directors. Specifically, the CTP (Centre Technique du Papier) from France; CIDAUT (Fundación para la Investigación y Desarrollo en Transporte y Energía), from Spain; CENTI (Centre for Nanotechnology and Smart Materials), from Portugal, and the law firm Gil & Robles - San Bartolome & Associés, from Luxembourg.

The international association that will manage the Single-Entry-Point (SEP) of the BIONANOPOLYS project has been formally constituted and will be able to support companies across the European Union in the market introduction of bionanomaterials through technical, legal, regulatory, safety, economic and financial support services.

The SEP was established as an AISBL (non-profit entity) on 17 February 2023 in the framework of the European project BIONANOPOLYS, funded by the Horizon 2020 programme. The technical director of ITENE and coordinator of this project, Carmen Sánchez, is the president of this association in which representatives of other project partners also act as directors. Specifically, the CTP (Centre Technique du Papier) from France; CIDAUT (Fundación para la Investigación y Desarrollo en Transporte y Energía), from Spain; CENTI (Centre for Nanotechnology and Smart Materials), from Portugal, and the law firm Gil & Robles - San Bartolome & Associés, from Luxembourg.

The BIONANOPOLYS SEP will reduce the risks and barriers to the commercial exploitation of bio-based materials and polymeric bionanocomposites with nanotechnology and accelerate market penetration and innovation processes. SMEs, large companies, and potential customers who are users of the BIONANOPOLYS OITB (Open Innovation Test Bed) will be able to access the services offered by the project partners through this entity, which will act as a one-stop shop, at affordable costs and conditions.

The test bed consists of 14 enhanced pilot plants and complementary services to support technological and commercial breakthroughs. Collaboration between all the partners that make up BIONANOPOLYS and access through the SEP allows joint access to all the services offered by the partners and helps to drive collaborative open innovation.

Call for access to the BIONANOPOLYS OITB
The SEP and the project partners will be in charge of evaluating the projects submitted to the BIONANOPOLYS platform once the open call launched last February to select five projects from different European countries that will be able to access its services free of charge to develop, test or scale-up bionanomaterials in the BIONANOPOLYS OITB closes.

Companies wishing to access the services to develop or test nanomaterials can submit their applications until 30 April.

The BIONANOPOLYS test bed could benefit companies involved in the production of biopolymers, cellulose paper, nonwovens, foams, or coatings, as well as the packaging, agriculture, food, cosmetics, pharmaceuticals, hygiene, textiles and 3D printing sectors.

Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

(c) INDEX™ | Palexpo SA
26.04.2023

INDEX™23 concludes successfully with over 610 exhibitors

The international nonwovens community came together once again in Geneva this week for INDEX™23, with with 12,017 attendees from over 100 countries and 610 exhibitors from 43 countries joining the event.

Exhibitors made the most of the four intensive days to meet potential new customers and extend business with existing clients. As one of the world’s leading nonwovens exhibitions, INDEX™ demonstrated the latest breakthroughs and innovative developments across all nonwovens’ applications.

The INDEX™ Lab, an exchange hub displaying samples from innovations and new developments, also showcased the winners and runners up from each of the five categories of the INDEX™ Innovation Award. Open to any EDANA member company or exhibitor at INDEX™23, the winners were announced on the first day of the exhibition during a dedicated ceremony at the EDANA stand.

The winners (more infomation):

The international nonwovens community came together once again in Geneva this week for INDEX™23, with with 12,017 attendees from over 100 countries and 610 exhibitors from 43 countries joining the event.

Exhibitors made the most of the four intensive days to meet potential new customers and extend business with existing clients. As one of the world’s leading nonwovens exhibitions, INDEX™ demonstrated the latest breakthroughs and innovative developments across all nonwovens’ applications.

The INDEX™ Lab, an exchange hub displaying samples from innovations and new developments, also showcased the winners and runners up from each of the five categories of the INDEX™ Innovation Award. Open to any EDANA member company or exhibitor at INDEX™23, the winners were announced on the first day of the exhibition during a dedicated ceremony at the EDANA stand.

The winners (more infomation):

  1. Nonwoven roll goods
    Winner: Suominen – HYDRASPUN® Circula Nonwoven
  2. Finished products made from, or incorporating nonwovens
    Winner: Henkel – Smart Adult Care
  3. Raw materials or components (e.g., fibre, binder, polymer, tape), of special relevance to the nonwovens industry and related converted products
    Winner: Fiberpartner – BicoBio
  4. Innovation in machinery of special relevance to the nonwovens industry
    Winner: Curt G. Joa, Inc. – ESC-8™
  5. Sustainable Product
    Winner: Sparkle Innovations – SugaFluff™

The "Nonwovens Journey", an immersive experience that takes a look at the innovative role of nonwovens, as well as how innovation has progressed in time around both sustainability, and how nonwovens are used in everyday life, also allowed visitors to discover the versatility of nonwovens.

Running alongside the exhibition itself, there was also a full programme of side events that were enjoyed by participants: Exhibitor Product Presentations from 33 exhibitors; a series of informative seminars covering a myriad of topics including medical nonwovens, sustainability, circular economy, geosynthetics, textiles, mobility, fair trade, gender equity, innovation, and market trends; country-specific briefings offering insights into the nonwovens market in various regions around the world; and a nonwovens tutorial intended as an induction to nonwovens for those new to the industry. These topics were all presented by leading industry experts and guest speakers, including among others, the World Trade Organization (WTO).

Concern for the environment has in recent years become increasingly important, and once again remained a key topic at INDEX™23, with companies pushing to achieve further CO2 reductions and circularity across the supply chain.

Continuing on from its success during COVID-19, the INDEX™23 Mobile App and Virtual Platform was back. This tool offered participants – both in Geneva and those following from home – the chance to watch presentations live and interact with speakers, exhibitors, and other participants. Attendees were able to plan their visit and organize meetings, which was highly appreciated. Video recordings from the sessions will remain available online in the app and platform for the coming weeks.

The next INDEX™ will take place in three years from 21-24 April 2026.

Source:

INDEX™ | Palexpo SA

(c) Hypetex
26.04.2023

Hypetex: Coloured Carbon Fibre Bike Wheels launched at The Cycle Show

The first set of coloured carbon fibre bike wheels made a debut public appearance at The Cycle Show at Alexandra Palace.

Developed in partnership with leading wheel brand Parcours, the Chrono carbon fibre wheels feature a gold finish made of Hypetex’s Zlatan uni-directional material and offer a lighter and higher-performance product than the traditional painted alternative.

Hypetex is a sustainable colouring technology for advanced materials, such as carbon fibre. Born out of Formula 1 racing, its patented paint-replacing process is a key step in advancing the lightweight revolution. Combining water-based eco-resins with a sustainable curing process, Hypetex materials are made with bold, colourful aesthetics as well as technical and cost-saving benefits.

Parcours is a leading wheel brand that offers high-performance, premium wheelsets that employs the latest advancements in aerodynamic technology. The Parcours X Hypetex gold wheels were featured at The Cycle Show in London on a bespoke Handsling A1R0evo, which was nominated for the Jaw Droppers trophy - a competition for the industry’s most striking designs.

The first set of coloured carbon fibre bike wheels made a debut public appearance at The Cycle Show at Alexandra Palace.

Developed in partnership with leading wheel brand Parcours, the Chrono carbon fibre wheels feature a gold finish made of Hypetex’s Zlatan uni-directional material and offer a lighter and higher-performance product than the traditional painted alternative.

Hypetex is a sustainable colouring technology for advanced materials, such as carbon fibre. Born out of Formula 1 racing, its patented paint-replacing process is a key step in advancing the lightweight revolution. Combining water-based eco-resins with a sustainable curing process, Hypetex materials are made with bold, colourful aesthetics as well as technical and cost-saving benefits.

Parcours is a leading wheel brand that offers high-performance, premium wheelsets that employs the latest advancements in aerodynamic technology. The Parcours X Hypetex gold wheels were featured at The Cycle Show in London on a bespoke Handsling A1R0evo, which was nominated for the Jaw Droppers trophy - a competition for the industry’s most striking designs.

Source:

Hypetex

(c) Source Fashion by Hyve
21.04.2023

Source Fashion returns July 2023

Source Fashion returns to London Olympia on 16-18th July, more than doubling in size and welcoming over 300 exhibitors from around the world.

Source Fashion offers a platform for decision-makers in buying, sourcing and procurement, with the reassurance of knowing that every exhibitor has been audited to ensure sustainability and transparency remains at the heart of their business model. The February launch show welcomed over 130 manufacturers from 20 countries including the UK, Peru, Cambodia, Pakistan, Turkey, China, India, Portugal, Hong Kong, Italy, and Greece, attracting nearly 5,000 visitors from leading retailers and brands including John Lewis, M&S, Sainsbury’s, Tesco, All Saints, Asos, Ted Baker, Bella Freud, FILA, Fred Perry, Matalan, Monsoon, Stitch Fix, Urban Outfitters, Very Group, and many more.

Source Fashion returns to London Olympia on 16-18th July, more than doubling in size and welcoming over 300 exhibitors from around the world.

Source Fashion offers a platform for decision-makers in buying, sourcing and procurement, with the reassurance of knowing that every exhibitor has been audited to ensure sustainability and transparency remains at the heart of their business model. The February launch show welcomed over 130 manufacturers from 20 countries including the UK, Peru, Cambodia, Pakistan, Turkey, China, India, Portugal, Hong Kong, Italy, and Greece, attracting nearly 5,000 visitors from leading retailers and brands including John Lewis, M&S, Sainsbury’s, Tesco, All Saints, Asos, Ted Baker, Bella Freud, FILA, Fred Perry, Matalan, Monsoon, Stitch Fix, Urban Outfitters, Very Group, and many more.

Suzanne Ellingham, Director of Sourcing of Source Fashion; “We couldn't have asked for a better first show. Leading retailers attended keen to source new, and crucially audited, producers and manufacturers. We champion responsibility, and sustainability isn’t just an addition to our show, it is our core value. We unite manufacturers practicing environmental, transparent, and fair-trade methods, with buyers looking to source sustainably.

“Our next show will be even bigger and better – we have already doubled the size of our floorplan for July and have been overwhelmed by the interest from both exhibitors and visitors. The global sustainability market is expected to grow by 24% annually in the next seven years according to Meta, which means now more than ever, brands are on the hunt for new sustainable manufacturers and suppliers to source from and the growth rate is staggering for Source Fashion. It is going to be firmly established as a significant platform for responsible sourcing by its second show.”

Source:

Source Fashion by Hyve / Good Results

21.04.2023

DyStar announces Restructuring Plan for Ludwigshafen Plant Facility

DyStar announces the plan to restructure its Ludwigshafen facility located in Germany. The strategic decision is made by the company in response to changing business conditions and market shifts.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “This is an important strategic move for DyStar. We will focus on developing key emerging markets, which have been shifting over a decade. In the wake of higher energy costs and inflation, DyStar is determined to further improve cost efficiency and drive sustainable productivity as we continue to deliver the highest quality of innovative products that support the global supply chain.”

Mr. Eric Hopmann, Chief Commercial Officer of DyStar Group said, “The restructuring of this facility will be carried out in a phased manner. DyStar will diversify the production activity out of Europe and start with the reduction of manpower as a consequence. DyStar’s customers can be further assured of undisrupted supply, hence their production should not be affected as we will work closely to meet their specific requirements.”

DyStar announces the plan to restructure its Ludwigshafen facility located in Germany. The strategic decision is made by the company in response to changing business conditions and market shifts.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “This is an important strategic move for DyStar. We will focus on developing key emerging markets, which have been shifting over a decade. In the wake of higher energy costs and inflation, DyStar is determined to further improve cost efficiency and drive sustainable productivity as we continue to deliver the highest quality of innovative products that support the global supply chain.”

Mr. Eric Hopmann, Chief Commercial Officer of DyStar Group said, “The restructuring of this facility will be carried out in a phased manner. DyStar will diversify the production activity out of Europe and start with the reduction of manpower as a consequence. DyStar’s customers can be further assured of undisrupted supply, hence their production should not be affected as we will work closely to meet their specific requirements.”

The facility has been an integral part of DyStar’s global network. DyStar inherited this facility from their founders who started the Indigo research and manufacturing more than 125 years ago.

(c) adidas AG
21.04.2023

adidas TERREX and National Geographic launch hiking collection

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

The 51-piece collection includes women’s, men’s, and gender-neutral offerings – all built to equip the wearer in multi-terrain environments:

  • A part of the collection is the RAIN.RDY Jacket; a 2.5L waterproof and seam-sealed outer garment built to facilitate epic adventures. The men’s jacket features a bold print of the shell formations in the Porsanger Peninsula, Norway, while the women’s is inspired by stills of White Sands National Park in New Mexico.
  • A long sleeve shirt is finished with the bold National Geographic yellow icon and reflective details.
  • The TERREX Swift R3 GORE-TEX Hiking shoes offer the peak combination of a lightweight construction and cushioning as seen in trail running shoes with the stability of a hiking boot. Finished in a print inspired by a stunning aerial shot of Earth, the hiking shoes come with a GORE-TEX lining and membrane seal so water is kept out, and a Continental™ Rubber outsole for optimal grip in wet or dry conditions.
  • The WIND.RDY: GET SHELTERED Jacket, with wind-resistant technology and a water repellent ripstop fabric, allows explorers to feel protected and confident in many weather conditions. The men’s and women’s versions come with bold prints inspired by photography including that of sandstone and snow at Comb Ridge, Utah. Smart design features including a bungee-cord enabled adjustable hem, a lightweight fabric and reflective details. Additionally, it features a bold new lenticular logo design that alternates between Terrex and National Geographic from different perspectives – and is made in part with recycled materials.
More information:
adidas Outdoor outdoor apparel
Source:

adidas AG

(c) Freudenberg Performance Materials Holding GmbH
21.04.2023

Freudenberg launches biodegradable fusible cotton shirt interlining range

Freudenberg Performance Materials Apparel (Freudenberg) launches its biodegradable fusible cotton shirt interlinings range 46xx. With this innovation, the world’s leading specialist in woven, knitted, weft and nonwoven interlinings reduces its impact on the environment and supports customers in achieving their own sustainability objectives. In Asia, the series is marketed under the name 42xx series.

Approved biodegradability and non-toxicity by Hohenstein Laboratories
The new Freudenberg fusible interlinings for shirts and blouses have been developed in such a way that they are harmless to people and the environment at the end of their life cycle. Germany’s independent Hohenstein Laboratories performed biodegradation tests on the 46xx series, based on the Hohenstein method which draws on DIN EN ISO 11721-2:2003 and EN ISO 846, and approved it as biodegradable and ecotoxicologically harmless. The tests by Hohenstein showed no negative effects on either the germination of garden cress nor on earthworms in the acute toxicity test.

Freudenberg Performance Materials Apparel (Freudenberg) launches its biodegradable fusible cotton shirt interlinings range 46xx. With this innovation, the world’s leading specialist in woven, knitted, weft and nonwoven interlinings reduces its impact on the environment and supports customers in achieving their own sustainability objectives. In Asia, the series is marketed under the name 42xx series.

Approved biodegradability and non-toxicity by Hohenstein Laboratories
The new Freudenberg fusible interlinings for shirts and blouses have been developed in such a way that they are harmless to people and the environment at the end of their life cycle. Germany’s independent Hohenstein Laboratories performed biodegradation tests on the 46xx series, based on the Hohenstein method which draws on DIN EN ISO 11721-2:2003 and EN ISO 846, and approved it as biodegradable and ecotoxicologically harmless. The tests by Hohenstein showed no negative effects on either the germination of garden cress nor on earthworms in the acute toxicity test.

Energy-saving interlining
The new biodegradable shirt interlinings also show great potential for energy saving, as the fusing can be performed at a low temperature. Concretely, this means that the resulting temperature between the upper fabric and the shirt interlining during fusing is only 127°C which is significantly lower than the commonly used temperature of 143°C. Certified to OEKO-TEX® STANDARD 100 Class II for successfully testing for no harmful substances, the shirt interlinings are washable at up to 40°C and resistant to dry cleaning. In addition, it has also passed all ecological-toxicological tests and is a perfect end-of-life cycle solution.

Product details and availability
The products in range 46xx are available in Europe in the color white and the following weight classes: 4605 (90g/m2), 4616 (150g/m2) and 4618 (55g/m2). The adhesive of the interlinings consists of a 100% degradable bio-polymer. The shirt interlinings are ideal for reinforcing shirt and blouse collars, cuffs and plackets used in fashion, leisure and business clothing. The biodegradable, non-toxic interlinings are particularly important for labels with an ecologically sustainable claim.

Source:

Freudenberg Performance Materials Holding GmbH

21.04.2023

Rieter: Annual General Meeting 2023

Shareholders Adopt All Motions Proposed by the Board of Directors

  • Distribution of a dividend of CHF 1.50 per share approved
  • Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
  • All members of the Board of Directors who stood for re-election were elected
  • Thomas Oetterli newly appointed to the Board of Directors
  • KPMG newly elected as statutory auditors
  • Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Shareholders Adopt All Motions Proposed by the Board of Directors

  • Distribution of a dividend of CHF 1.50 per share approved
  • Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
  • All members of the Board of Directors who stood for re-election were elected
  • Thomas Oetterli newly appointed to the Board of Directors
  • KPMG newly elected as statutory auditors
  • Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Annual Report, Financial Statements, Consolidated Financial Statements and Remuneration Report
The shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, financial and consolidated financial statements for 2022. Moreover, they formally approved the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

By way of a consultative vote, the shareholders also approved the Remuneration Report 2022.

Remuneration of the Members of the Board of Directors and the Group Executive Committee
In two separate binding votes, the proposed maximum total remuneration of the members of the Board of Directors and the Group Executive Committee for the 2024 financial year was approved.

Re-Election of the Members of the Board of Directors
The Chairman of the Board, Bernhard Jucker, and the Directors, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi, Sarah Kreienbühl and Daniel Grieder were confirmed for a further one-year term of office. In addition, Thomas Oetterli was newly elected to the Board of Directors for a term of office.

The members of the Remuneration Committee who were standing for election –
Hans-Peter Schwald, Bernhard Jucker and Sarah Kreienbühl – were likewise re-elected for a one-year term of office.

Election of KPMG as Statutory Auditors
The shareholders also adopted the proposal of the Board of Directors to elect KPMG AG, Zurich, as new statutory auditors for the financial year beginning January 1, 2023.

Amendments to the Articles of Association
The shareholders further approved the proposals of the Board of Directors to amend the Articles of Association of Rieter Holding Ltd., in order to implement the requirements of the reform of the Swiss company law, which came into force on January 1, 2023.

Source:

Rieter Holding Ltd.

14.04.2023

Carbios presents its 2022 Annual Results

Carbios, a compnay in the development and industrialization of biological technologies for reinventing the life cycle of plastics and textiles, announces its operating and financial results for the year 2022. The financial statements as of December 31, 2022, were approved by the Company’s Board of Directors at their meeting on April 5, 2023.

Carbios, a compnay in the development and industrialization of biological technologies for reinventing the life cycle of plastics and textiles, announces its operating and financial results for the year 2022. The financial statements as of December 31, 2022, were approved by the Company’s Board of Directors at their meeting on April 5, 2023.

  • Project to build, in France, the world’s first PET biorecycling plant: Progress in line with 2025 unit commissioning target6
  • Excellent results from the demonstration plant validating the industrial scale-up of Carbios technology
  • Carbios licensing documentation ready for worldwide industrial and commercial deployment
  • Long-term exclusive strategic partnership with Novozymes to ensure supply of enzymes at industrial scale for the Reference Unit and all future licensee plants
  • Creation of fiber-to-fiber consortium with On, Patagonia, Puma, PVH Corp., and Salomon
  • CE-PET research project successfully completed
  • Participation in WhiteCycle project co-funded by Horizon Europe and coordinated by Michelin
  • Publication of scientific articles in the prestigious Biophysical Journal and in Chemical Reviews
  • Carbios hosts world’s first PET Biorecycling Summit
  • Carbios publishes first Sustainability Report and outlines objectives for environmental, social and governance (ESG) initiatives
  • Carbios joins Ellen MacArthur Foundation’s circular economy network
  • €30 million European Investment Bank loan drawn down in 2022
  • Group’s cash position of €101 million as of December 31, 2022
More information:
Carbios plastics life cycle Recycling
Source:

Carbios

(c) Beaulieu International Group
05.04.2023

B.I.G. acquires Australian B2B flooring wholesaler Signature Floors

B.I.G. has signed an agreement with Australian B2B flooring wholesaler to acquire its complete range of activities. Through this acquisition, both companies will strengthen their growth opportunities in both soft, resilient and hard flooring in Australia and New Zealand.

CEO Pol Deturck comments: “This acquisition will provide great opportunities for all our stakeholders, especially our customers, suppliers and employees. Both B.I.G. and Signature have solid positions as leaders in the flooring industry and a shared commitment to sustainability, product innovation, design and customer service.”

Signature Floors is an Australian B2B flooring wholesaler serving retailers, commercial contractors, architect-designers and end-users in Australia and New Zealand. Founded in 1989, the company has 120 employees and is owned by 2 family shareholders which are both active in the company. Signature has offices, warehouses and showrooms in Melbourne and Auckland spread over 3 locations.

B.I.G. has signed an agreement with Australian B2B flooring wholesaler to acquire its complete range of activities. Through this acquisition, both companies will strengthen their growth opportunities in both soft, resilient and hard flooring in Australia and New Zealand.

CEO Pol Deturck comments: “This acquisition will provide great opportunities for all our stakeholders, especially our customers, suppliers and employees. Both B.I.G. and Signature have solid positions as leaders in the flooring industry and a shared commitment to sustainability, product innovation, design and customer service.”

Signature Floors is an Australian B2B flooring wholesaler serving retailers, commercial contractors, architect-designers and end-users in Australia and New Zealand. Founded in 1989, the company has 120 employees and is owned by 2 family shareholders which are both active in the company. Signature has offices, warehouses and showrooms in Melbourne and Auckland spread over 3 locations.

Together, B.I.G. and Signature will integrate their sales and business activities over the coming months, ensuring business continuity for customers, partners, suppliers and employees.

Both companies expect to close the transaction at the end of April 2023.

Source:

Beaulieu International Group

Foto: ANDRITZ
Novafiber CEO and Head of Production together with ANDRITZ technicians and project manager in front of the newly installed 6-cylinder EXEL line
05.04.2023

Novafiber starts up textile recycling and airlay lines from ANDRITZ

International technology group ANDRITZ has delivered, installed, and commissioned a mechanical textile recycling line and an airlay line at Novafiber’s nonwovens production mill in Palín, Guatemala. Both lines have been successfully operating since December 2022.

The recycling line – the second tearing line ANDRITZ supplied to Novafiber – processes post-industrial textile waste from Central America. The recycled fibers feed the latest ANDRITZ Flexiloft airlay line, which produces nonwoven end-products for the bedding and furniture industries – a true example of a circular textile-to-nonwoven approach. The production process ensures complete material use as a state-of-the-art edge trim recycling system returns any waste directly to the tearing and/or airlay line.

This combination of ANDRITZ tearing and airlay lines allows Novafiber to process large amounts of post-industrial garments, controlling the supply chain from raw material to final product. In addition, it enables energy savings and a reduced carbon footprint due to the reduction of shipments.

International technology group ANDRITZ has delivered, installed, and commissioned a mechanical textile recycling line and an airlay line at Novafiber’s nonwovens production mill in Palín, Guatemala. Both lines have been successfully operating since December 2022.

The recycling line – the second tearing line ANDRITZ supplied to Novafiber – processes post-industrial textile waste from Central America. The recycled fibers feed the latest ANDRITZ Flexiloft airlay line, which produces nonwoven end-products for the bedding and furniture industries – a true example of a circular textile-to-nonwoven approach. The production process ensures complete material use as a state-of-the-art edge trim recycling system returns any waste directly to the tearing and/or airlay line.

This combination of ANDRITZ tearing and airlay lines allows Novafiber to process large amounts of post-industrial garments, controlling the supply chain from raw material to final product. In addition, it enables energy savings and a reduced carbon footprint due to the reduction of shipments.

Based in Palín, Novafiber is a leading company in Guatemala for producing nonwovens from post-industrial textile waste for both the local market and export.

Source:

ANDRITZ AG

05.04.2023

MUNICH FABRIC START, BLUEZONE & VIEW moved to July

With a current booking level of almost 90% for the international fabric trade show MUNICH FABRIC START, KEYHOUSE, THE SOURCE and BLUEZONE, Munich Fabric Start Exhibitions GmbH is starting the new season for Autumn.Winter 24/25 on a strong footing. From the organisers' point of view, the main reason for the high level of acceptance is the rebalancing of the July dates.

The international fabric trade show MUNICH FABRIC START (18 to 20 July), the innovation hub KEYHOUSE, theb one-stop sourcing platform THE SOURCE and the international denim trade show BLUEZONE (18 and 19 July) will move ahead and at the same time increase their relevance in the international trade show scene. For a large part of the visitors, the earlier date is closer to the collection rhythms and offers more time for further developments.

With a current booking level of almost 90% for the international fabric trade show MUNICH FABRIC START, KEYHOUSE, THE SOURCE and BLUEZONE, Munich Fabric Start Exhibitions GmbH is starting the new season for Autumn.Winter 24/25 on a strong footing. From the organisers' point of view, the main reason for the high level of acceptance is the rebalancing of the July dates.

The international fabric trade show MUNICH FABRIC START (18 to 20 July), the innovation hub KEYHOUSE, theb one-stop sourcing platform THE SOURCE and the international denim trade show BLUEZONE (18 and 19 July) will move ahead and at the same time increase their relevance in the international trade show scene. For a large part of the visitors, the earlier date is closer to the collection rhythms and offers more time for further developments.

What's new?
Due to the early date of MUNICH FABRIC START and BLUEZONE, the Munich trade show duo with KEYHOUSE and THE SOURCE formats will function even more strongly as an impulse generator and leading international event. The Munich location will also be strengthened by the relocation of the DMI Fashion Day from Düsseldorf to the Bavarian capital. The first DMI FASHION DAY LIVE will take place the day before the next MUNICH FABRIC START at the MOC.

The course will also be set anew in September: The date, which remains important for the industry, will in future be occupied by reVIEW - the new format of the VIEW PREMIUM SELECTION for follow-ups and trends as well as new market developments. On an area of around 2,500 square metres, the first reVIEW Autumn.Winter 24/25 will be held on 13 and 14 September 2023 on the Zenith grounds in Motorworld.

Source:

MUNICHFABRICSTART Exhibitions GmbH

(c) ROICA™ by Asahi Kasei
31.03.2023

ROICA™ by Asahi Kasei showcases ROICA™ V550 at Kingpins

ROICA™ by Asahi Kasei joins from April 12th the Kingpins Show, showcasing its latest innovation, the premium & smart stretch yarn ROICA™ V550.

ROICA™ V550 is a Cradle to Cradle-Certified™ sustainable degradable stretch yarn with a Material Health Gold Level Certificate. It degrades under ISO 14855-1 tested by OWS decomposing to CO2 and water.

The new responsible and innovative solution partners with denim companies, such as Artistic Milliners, Candiani Denim and Prosperity. They all have adopted the eco-high-tech yarn into their collections and showcase them at Kingpins.

ROICA™ by Asahi Kasei joins from April 12th the Kingpins Show, showcasing its latest innovation, the premium & smart stretch yarn ROICA™ V550.

ROICA™ V550 is a Cradle to Cradle-Certified™ sustainable degradable stretch yarn with a Material Health Gold Level Certificate. It degrades under ISO 14855-1 tested by OWS decomposing to CO2 and water.

The new responsible and innovative solution partners with denim companies, such as Artistic Milliners, Candiani Denim and Prosperity. They all have adopted the eco-high-tech yarn into their collections and showcase them at Kingpins.

Source:

ROICA™ by Asahi Kasei

31.03.2023

EURATEX at 1 year EU Textile Strategy – Yes, but …

On 30 March 2022, the European Commission presented its vision for the future of the textile industry. The strategy mainly focuses on reducing the environmental footprint and promote sustainability and transparency in the value chain.

EURATEX has welcomed the publication of the strategy, as it recognises the strategic importance of the European textile industry, and its core competitive values of quality and creativity. At the same time, the association has warned that translating that vision into reality is a delicate process, as the industry needs to reconcile sustainability with competitiveness. Making the green (and digital) transition should make companies stronger; the benefits should outweigh the costs.

On 30 March 2022, the European Commission presented its vision for the future of the textile industry. The strategy mainly focuses on reducing the environmental footprint and promote sustainability and transparency in the value chain.

EURATEX has welcomed the publication of the strategy, as it recognises the strategic importance of the European textile industry, and its core competitive values of quality and creativity. At the same time, the association has warned that translating that vision into reality is a delicate process, as the industry needs to reconcile sustainability with competitiveness. Making the green (and digital) transition should make companies stronger; the benefits should outweigh the costs.

This premise had a serious blow by the Russian war in Ukraine, which erupted at almost the same time when the strategy was launched, and has dramatically changed the economic context. Energy prices increased by a factor of 10 (!), putting the European industry at a significant disadvantage with its global competitors, leading to company shutdowns or relocations. Extended lock downs in China and defensive trade policies in the US and elsewhere have further generated uncertainty on the market and disrupted supply chains.

Today, one year after its publication, EURATEX remains carefully optimistic about the implementation of the strategy, but needs to warn against some important pitfalls on the road ahead.

  1. Despite these turbulent times, the Commission is moving ahead “swiftly” in translating their EU Textile Strategy into (draft) legislation. At present, at least 16 pieces of legislation are on the table, which will turn the textile industry into a strictly regulated sector. The quality of this new regulatory framework is critical to the success of the strategy: upcoming rules need to be coherent, technically feasible and enforceable, and have a minimal cost for SMEs. EURATEX calls for a realistic timetable and “competitiveness test” for each piece of legislation before it is adopted.
  2. Textile companies need to be informed and supported to comply with this new framework. This requires substantial funding which should be earmarked exclusively to the sector, covering areas of innovation and digitalisation, skills development, support to start ups and internationalisation, as well as access to affordable energy. In this regard, EURATEX calls on the Commission to translate the current “good intentions” into concrete decisions.
  3. The EU strategy will not work if there is no demand for sustainable textiles, both from individual consumers and public authorities (procurement). Concrete measures need to be taken to offer a competitive advantage to sustainable and high quality textile products, e.g. through a different VAT rate, strict procurement rules, closer cooperation between the brands/retailers, producers and consumers.
  4. The EU strategy could also fail, if the global dimension of the textile industry is ignored. Up to 80% of clothing products are produced outside the EU; these products need to comply with the new framework, but it remains unclear how to ensure that level playing field. Market surveillance needs to be stepped up massively – also targeting on line sales – but this would require significant efforts from member states, which are not available as of today.

Despite these important challenges, EURATEX remains committed to the successful implementation of the EU Textile Strategy. Director General Dirk Vantyghem commented: “We want to be a global leader in sustainable textiles, building on the entrepreneurship, quality and creativity of nearly 150,000 European textile companies. Creating this new framework is an incredible challenge, requiring a close dialogue between the industry and the regulator. But if well designed and carefully implemented, it can set a new era for the European textile industry”.

Source:

Euratex

(c) Kornit Digital LTD
31.03.2023

Kornit Digital introduces Smart Curing and Rapid SizeShifter at TecStyle Visions 2023

Kornit Digital LTD. announced to unveil its new Smart Curing and Rapid SizeShifter solutions at TecStyle Visions 2023. Kornit Smart Curing is an intelligent and adaptive solution significantly streamlining curing processes while delivering high-quality results. Additionally, the introduction of Rapid SizeShifter eliminates time-consuming direct-to-garment pallet changes typically required to address disparate applications.

Kornit’s new energy-efficient Smart Curing solutions include Orion for mid-level production, and Titan for higher-capacity volumes – both optimized for compatibility with Kornit Atlas MAX systems and based on field-proven solutions from the acquisition of Tesoma. These highly efficient curing systems sync production and finishing for an end-to-end process that reduces both energy consumption and total cost of ownership (TCO). Kornit’s Rapid SizeShifter for Atlas MAX is an adjustable pallet that quickly adapts to disparate application requirements – reducing costly downtime associated with pallet changes and streamlining production for accelerated time-to-market.

Kornit Digital LTD. announced to unveil its new Smart Curing and Rapid SizeShifter solutions at TecStyle Visions 2023. Kornit Smart Curing is an intelligent and adaptive solution significantly streamlining curing processes while delivering high-quality results. Additionally, the introduction of Rapid SizeShifter eliminates time-consuming direct-to-garment pallet changes typically required to address disparate applications.

Kornit’s new energy-efficient Smart Curing solutions include Orion for mid-level production, and Titan for higher-capacity volumes – both optimized for compatibility with Kornit Atlas MAX systems and based on field-proven solutions from the acquisition of Tesoma. These highly efficient curing systems sync production and finishing for an end-to-end process that reduces both energy consumption and total cost of ownership (TCO). Kornit’s Rapid SizeShifter for Atlas MAX is an adjustable pallet that quickly adapts to disparate application requirements – reducing costly downtime associated with pallet changes and streamlining production for accelerated time-to-market.

(c) PERFORMANCE DAYS / Design & Development GmbH Textile Consult
24.03.2023

Performance Days: New concept starting October 2023

From March 15-16, 2023, the spring edition of PERFORMANCE DAYS kicked off on the fairgrounds of Messe München. With around 2,685 visitors, the event organizers were particularly pleased with numbers up on the previous winter fair. High attendances were also evident at the Expert Talks on both days, which provided information on the latest color and fabric trends, news on developments in sustainability and new technologies from fiber manufacturers. The focal points of the show were marked by the PERFORMANCE FORUM, which showcased the fabric highlights for the spring/summer 2025 season as well as the two PERFORMANCE AWARD and ECO PERFORMANCE AWARD winners.

After the kick-off event in Munich in March, the industry now looks forward to the follow-up fairs in Portland from April 4-5, 2023 and in Shanghai, April 10-11, 2023.

From March 15-16, 2023, the spring edition of PERFORMANCE DAYS kicked off on the fairgrounds of Messe München. With around 2,685 visitors, the event organizers were particularly pleased with numbers up on the previous winter fair. High attendances were also evident at the Expert Talks on both days, which provided information on the latest color and fabric trends, news on developments in sustainability and new technologies from fiber manufacturers. The focal points of the show were marked by the PERFORMANCE FORUM, which showcased the fabric highlights for the spring/summer 2025 season as well as the two PERFORMANCE AWARD and ECO PERFORMANCE AWARD winners.

After the kick-off event in Munich in March, the industry now looks forward to the follow-up fairs in Portland from April 4-5, 2023 and in Shanghai, April 10-11, 2023.

New concept starting October 2023: Premiere for highlighted focus on footwear
As part of the upcoming PERFORMANCE DAYS, which will once again take place at the Messe München exhibition center on October 4-5, 2023, the event organizers will no longer focus explicitly on sustainable functional textiles and accessories, but will also focus on the footwear market.

To support the integration of the footwear market into the trade fair events in Munich, Portland, New York and Shanghai, the organizers have brought on board two industry specialists, Nina Conrad and Rucky Zambrano.

Nina Conrad has been active as a sustainability consultant in the textile and leather industry for many years, specializing in traceable and local supply chains. Her core business is the production of leather and leather goods derived from animals raised on certified organic farms. She is also a founding partner of the Sustainable Leather Foundation and co-founder of the Fibershed subsiduary DACH.

Rucky Zambrano is a industrial designer and expert. When he got to know Vibram in 1992, he shifted his career to footwear for reasons of passion. For 13 years now, Zambrana and Vibram have been a driving force in the footwear market and made the leap from performance to fashion, as witnessed with the Merrell Chameleon, the Prada Luna Rossa boat shoe sole or the latest Vibram FiveFingers models. He is currently responsible for footwear for the Finnish children’s outdoor brand Reima.

Source:

PERFORMANCE DAYS / Design & Development GmbH Textile Consult

(c) Messe Frankfurt
24.03.2023

Intertextile Shanghai Home Textiles returns from 28 – 30 March 2023

Intertextile Shanghai Home Textiles – Spring Edition is set for a renewal. After last year’s brief pause, 283 exhibitors from 5 countries and regions will showcase their latest innovations at the National Exhibition and Convention Center (Shanghai) during this traditional peak sourcing period. The fair will be held concurrently with Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value from 28 – 30 March 2023.

Intertextile Shanghai Home Textiles – Spring Edition is set for a renewal. After last year’s brief pause, 283 exhibitors from 5 countries and regions will showcase their latest innovations at the National Exhibition and Convention Center (Shanghai) during this traditional peak sourcing period. The fair will be held concurrently with Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value from 28 – 30 March 2023.

Comprehensive range of products zoned for easy sourcing
The 27,000 sqm gross exhibition space in hall 5.2 will host suppliers in multiple product categories, such as bedding, towelling, table and kitchen linen, home textile technologies, and textile designs. Several product pavilions and zones will be formed to encourage efficient sourcing, with areas designated for quality bedding, towelling, feather and down duvet fillings, quilt fillings, intelligent equipment and upholstery fabric products. Buyers looking for sustainable fibres, yarns and fabrics may be interested in sourcing at the Lenzing Group’s brand new centralised Lenzing Home Textile Satellite Pavilion. With Lenzing joined by eight of its Chinese downstream manufacturers, the pavilion will showcase the various home textile applications for the Austrian company’s wood-based TENCEL™ fibres.

Other well-known international and domestic exhibitors include Cotton Council International (CCI), Zhangjiagang Coolist Life Technology, Guangdong Kulida Down, Wujiang City Yunjie Textiles, Yantai Pacific Home Fashion, Sunvim Group, and Jiangsu Goostars Hometextiles. These suppliers, and many more, will present their up-to-date products to meet the sourcing demands of buyers from different channels.

Programme
At every edition, Intertextile Shanghai Home Textile’s fringe events keep fairgoers informed on a variety of topics, allowing exhibitors and visitors alike to stay up to date with the latest market trends and make informed business decisions.

Aligning with the fair’s general direction on promoting sustainability, and to satisfy the industry’s needs, representatives from Lenzing will be holding an exclusive seminar about the e-commerce opportunities surrounding eco-friendly TENCEL™ products’ sleep enhancing qualities. Other presentations and discussions that touch on sustainability will also be available under the fair’s Textile & Technology event theme.

With consumers globally paying more attention to health issues and increasing their spending on health products, the home and contract textile industry is also a party to this rising trend. To this end, seminars discussing traditional Chinese medicine and how it relates to different health issues will be held on day one. Their crossover topics include how aromatherapy can encourage high-quality sleep, as well as an introduction on the innovation of traditional medicinal textiles.

Moreover, the well-known Chinese retailer JD.com will co-host an event that promotes home textile products made with Chinese cotton. Several talks will focus on different aspects, such as the products’ quality and the overall potential of this industry aided by government policies.

After China’s relaxation of border restrictions and other pandemic control measures, it is now easier for domestic and overseas buyers to visit their Chinese suppliers at the fairground, for the chance to touch and feel their desired products.

24.03.2023

adidas: FY Results of 2022 and Outlook for 2023

Major developments FY 2022

  • Currency-neutral revenues up 1% reflecting growth in all markets except Greater China
  • Double-digit increases in North America and Latin America, EMEA up high single digits
  • Gross margin declines to 47.3% due to strong increase in supply chain costs and discounting  
  • Operating profit at € 669 million, including one-off costs of € 312 million
  • Operating margin decreases to 3.0%  
  • Net income (continuing operations) of € 254 million includes € 350 million one-off costs
  • Executive and Supervisory Boards propose dividend of € 0.70 per share

Major developments Q4 2022

Major developments FY 2022

  • Currency-neutral revenues up 1% reflecting growth in all markets except Greater China
  • Double-digit increases in North America and Latin America, EMEA up high single digits
  • Gross margin declines to 47.3% due to strong increase in supply chain costs and discounting  
  • Operating profit at € 669 million, including one-off costs of € 312 million
  • Operating margin decreases to 3.0%  
  • Net income (continuing operations) of € 254 million includes € 350 million one-off costs
  • Executive and Supervisory Boards propose dividend of € 0.70 per share

Major developments Q4 2022

  • Currency-neutral revenues decline 1% impacted by termination of Yeezy partnership
  • Gross margin at 39.1% reflecting increased supply chain costs and higher discounting
  • Operating loss of € 724 million
  • Net loss from continuing operations of € 482 million

Outlook for 2023
Underlying operating profit expected to be around break-even level

In 2023, adidas expects currency-neutral revenues to decline at a high-single-digit rate as macroeconomic challenges and geopolitical tensions persist. Elevated recession risks in Europe and North America as well as uncertainty around the recovery in Greater China continue to exist. The company’s revenue development will also be impacted by the initiatives to significantly reduce high inventory levels. In addition, while the company continues to review future options for the utilization of its Yeezy inventory, the guidance already reflects the revenue loss of around € 1.2 billion from potentially not selling the existing stock. Accounting for the corresponding negative operating profit impact of around € 500 million, the company’s underlying operating profit is projected to be around the break-even level in 2023.

Reported operating loss of € 700 million projected
Should the company irrevocably decide not to repurpose any of the existing Yeezy product going forward, this would result in the potential write-off of the existing Yeezy inventory and would lower the company’s operating profit by an additional € 500 million this year. In addition, adidas expects one-off costs of up to € 200 million in 2023. These costs are part of a strategic review the company is currently conducting aimed at reigniting profitable growth as of 2024. If all these effects were to materialize, the company expects to report an operating loss of € 700 million in 2023.

Source:

adidas AG