From the Sector

Finishing machinery specialist Monforts will exhibit at the upcoming Febratex textile machinery exhibition taking place in Blumenau, Brazil, from August 20-23, along with Uniferro, its new regional partner.

This new alliance follows the retirement of Herbert Erdmann of the service agency Euro Texteis, who has worked with Monforts over more than 30 years to secure a leading position in the region for Montex stenter dryers, Thermex dyeing ranges and associated finishing technology.

With offices in Sao Paulo and Ceara and sub-agents across Brazil, Uniferro has been active in the textile industry for over 50 years.

coaTTex
At Febratex, Monforts will introduce its latest coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coater is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and black-out coating.

Denim hub
Brazil remains a buoyant hub for textile manufacturing with a particular stength in the denim dyeing and finishing sector and many Monforts Thermex hotflue dyeing systems are already operational in the region, reaping the benefits of the Econtrol® process.

Econtrol® is a continuous process for the dyeing of woven cotton and cellulosic fabrics, especially denim, in which reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes.

“Differentiation is the key in the highly-competitive denim fabrics industry, whether through the successful incorporation of new fibres, accommodating new fabric constructions or exploring the many options for how to treat them at the finishing stage, to gain a market advantage,” says says Monforts Regional Sales Manager Achim Gesser. “Our lines allow users to be extremely versatile and respond quickly to market demand, while also allowing very short production runs.”

Because finishing is a particularly energy-intensive part of the textile production chain, it is exactly where convincing results can be achieved, he adds, and Monforts has developed a wide range of energy-saving. These included a range of heat recovery systems, such as the Universal Energy Tower and the ECO Booster. Both can also be retrofitted to existing ranges to make production more resource-efficient and economical, yet without having to invest in a new machine.

“Energy costs tend to be high in Brazil and can account for up to 70% of production costs for our customers, so there is great demand for ways of saving money,” says Gesser. “Cutting energy usage also helps in terms of global warming and reducing carbon footprint, of course, so these latest technologies are a win-win for fabric finishers. As we look forward to a promising partnership with Uniferro in Brazil, we would like to extend our thanks and best wishes for the future to Herbert Erdmann for his hard work over the years.”

The first installations of the Trützschler Card TC 30i and the Trützschler Integrated Draw Frame IDF 3 are now complete – and the first customers have finished rigorous testing in direct spinning applications.

The Italian company Marchi & Fildi, headquartered in Biella, was one of the first to test the new IDF 3. The company specializes in producing pure and blended yarns made from natural or man-made fibers for flat knitting, circular knitting and weaving. Its products are used for fashion, furnishings and technical applications worldwide. It also places a strong focus on reducing its environmental impact.

Marchi & Fildi’s first trials were carried out with different fiber blends. This included a blend of 70 % soft waste cotton and 30 % polyester as the raw material for rotor direct spinning, with a yarn count in a range of Ne 8 to Ne 12 and Ne 30.
Later tests involved fiber blends of 50 % PET and 50 % recycled cotton from hard textile waste for rotor direct spinning with a yarn count of Ne 30. Experts at Marchi & Fildi stated that this material blend is typically very challenging. Processing secondary fibers made from hard textile waste requires very high competence in yarn production, which Marchi & Fildi impressively demonstrates. It also requires advanced technologies. This is due to technological challenges such as significantly lower fiber length. Trützschler’s IDF technology has a special drafting zone geometry that ensures reliable fiber guidance and controls floating fibers. It generates lower drafts than a conventional draw frame passage and avoids the risk of false drafts and count variations.

Decades of experience with the IDF technology have demonstrated that the higher the short fiber content, the better the result with IDF compared to conventional two draw frame passages. In combination with the TC 30Ri, a variant of TC 30i that has been specifically equipped and configured for processing recycled fibers, the IDF 3 delivers maximum possible quality for the production of sustainable yarns.

Overall, the company’s results showed a 75 % increase in productivity over the previous card model and a 14 % reduction in energy consumption at higher production rates. Combining the TC 30Ri and IDF 3 also enabled Marchi & Fildi to skip the drawing stage from its process, which boosts quality while saving resources and cutting costs.

From June 24 to 28, a delegation of Italian textile machinery manufacturers will be engaged in Turkmenistan for an institutional mission organized by ACIMIT, the Association of Italian Textile Machinery Manufacturers, and Italian Trade Agency. The delegation will have some institutional and commercial meetings scheduled in Ashgabat.

For the Italian textile machinery industry, the Turkmen market has high growth potential. Cotton is the third largest export product of the Country, and local authorities aim to develop a robust textile industry capable of processing the locally grown raw material. Significant investments in new equipment will be necessary for the success of this development program. To achieve this goal, the demand for textile machinery and technologies is rapidly increasing.

This is testified by the average annual growth rate of Turkmen textile machinery imports between 2009 and 2023 (+7.3%). Furthermore in 2024-2027 period forecasts by ACIMIT predict a further average annual increase of 5.5%.

Meanwhile, in 2023, the demand for Italian textile machinery from Turkmen companies has grown. Italian exports increased from 600,000 euros in 2022 to approximately 13 million euros the following year.

The Italian companies participating in the institutional mission are: Brazzoli, Color Service, Itema, Marzoli, Mcs, Reggiani Macchine, Salvadè, Santoni.

North Carolina State University’s Wilson College of Textiles has been making inroads challenging the conventional pad finishing process and significantly reducing its environmental footprint in collaboration with Baldwin Technology Inc. Front and center in its finishing lab is Baldwin’s TexCoat G4™ digital finishing system.
 
For nearly 125 years, the Wilson College of Textiles has been a hub of innovation and learning, transforming students into experts in the world of textiles. As the textile industry grapples with sustainability challenges, the college has embraced new technologies and innovations to address the issue head-on.
 
At the forefront of this transformation is the Zeis Textiles Extension for Economic Development, an arm of Wilson College which serves the textile industry’s prototyping and pilot production needs in its five laboratories – spun yarn, knitting, weaving, dyeing and finishing, and physical testing. Collaborations with various textile companies have allowed the university to foster industry partnerships that bring forth groundbreaking ideas.
 
The partnership with Baldwin Technology marks a major milestone for the Raleigh, North Carolina-based college’s efforts to contribute to a more sustainable tomorrow.
 
To tackle the longstanding challenges of unsustainable fashion, NC State has taken the lead in demonstrating to students and industry the transition from the traditional pad finishing process to Baldwin’s TexCoat™ G4 system. It offers an innovative “non-contact” precision spray that significantly reduces water consumption, energy usage and chemical waste.
 
“Instead of needing to take the fabric, dip it into a bath to saturate it, squeeze the excess, dry and cure it, you can now precisely add the exact amount of finish you need on the fabric,” explained Rick Stanford, Baldwin's VP Global Business Development of Textiles. “The TexCoat™ G4 system will reduce the amount of pick-up that’s required to carry the chemical onto the fabric. This will also take a lot less energy to dry the fabric, increasing production speeds.”
 
The adoption of the TexCoat™ G4 system signals a new era for the college, allowing students to actively participate in shaping a sustainable future for the textiles industry. In the global effort to protect the planet and its resources, NC State's Wilson College of Textiles is at the forefront, preparing the next generation of professionals to be the leaders of the sustainable textile movement.

International technology group ANDRITZ has successfully started up a new nonwovens production line supplied to Teknomelt Teknik Mensucat San. ve Tic. A.S. in Kahramanmaras, Türkiye. The new neXline wetlace CCP (carded-carded-pulp) line produces nonwoven roll goods for biodegradable, plastic-free wet wipes

By combining the benefits of two technologies, spunlace and wetlaid, the line enables the use of bio-based fibers, like viscose and wood pulp, to produce a high-performance and sustainable wipe with the same technical product characteristics and performances as a conventional wipe made of synthetic fibers while protecting the environment.

Teknomelt is one of the leading manufacturers of nonwoven meltblown, spunbond, SMS and SMMS fabrics in Türkiye. The company serves a wide range of markets, exporting 45% of its production. With the new ANDRITZ Wetlace CCP line, the company is expanding its range of sustainable nonwovens production for wipes. 

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Teknik Fuarcılık, which has more than 30 years of experience in exhibition organization and has made the ITM International Textile Machinery Exhibition a world brand, has taken action to make the success achieved by the garment and ready-to-wear sector sustainable. GarmentTech İstanbul Exhibition, which will be organized with the support of the members of the Garment Machinery Advisory Board and in cooperation with the Apparel Automation and Machinery Manufacturers Association (KOMİD), will host professional visitors and global buyers from all over the world.

The press conference of GarmentTech İstanbul Exhibition was attended by members of the Garment Machinery Advisory Board, Vice Chairman of Astaş Holding H. Kaya Aşçı, Astaş Juki Board Member and General Manager Turgay Aşçı, Chairman of the Board of Çatma Makine Yavuz Çatma, Chairman of the Board of Alba Makine Cengiz Albayrak, General Manager of Malkan Makine Alparslan Er, General Manager of Uğur Makine Temel Kamiloğlu, Tetaş Sales and Marketing Assistant General Manager Murat Eren, Malkan Makina Factory Manager Metin Kılıç and KOMID President Haluk Akın, TEMSAD President Adil Nalbant, KOMİD Members Serkon Makina Chairman İzzet Savaş, Robotech General Manager Hüseyin Çetin, Chairman of the Board of NewTech Machinery Nezir Yazıcı, LGM Foreign Trade Specialist Yiğit Sağdık Manav, Avtek Manager Oğuz Avcı and many sector representatives.

Toros Greenhalgh becomes General Manager of the new KARL MAYER subsidiary in Türkiye

In October 2023, the KARL MAYER GROUP established its own site in Bursa, Türkiye, thus increasing its presence in one of its most important markets. KARL MAYER TURKEY will meet increasing customer demands for after-sales service, spare parts (Care Solutions), and academy, in the sectors of warp knitting and warp preparation, while KARL MAYER’s long-standing regional representative ERKO focuses on machine sales.

Toros Greenhalgh was appointed General Manager of KARL MAYER TURKEY on February 1st of this year. Holding a degree in mechanical engineering and materials science from the University of Birmingham, he comes with experience in the fields of industrial plant construction management, renewable energy technologies, and the distribution of medical devices. For the past seven years he has been active in the sector of textile machinery through ERKO with particular focus on KARL MAYER machine sales, service, and spare parts.

BTMA member Vickers Oils has marked an important milestone in its partnership with knitting machinery leader Lonati by earning Original Equipment Manufacturer (OEM) approval for its VICKERLUBE SOCK 46 needle oil.

VICKERLUBE SOCK 46 is a mineral-based needle lubricant designed to meet the criteria for modern knitting machine technology. It provides a high standard of lubrication as well as holding very good stability properties and having a high resistance to oxidation. The product is readily scourable and holds a well-balanced additive system meaning that it is fully compatible with all machine components. It can also be used with machines producing any yarn type – including tricky elastanes – to produce the highest quality end product.

Lonati, headquartered in Brescia, Italy, has been a prominent name in knitting machines for over 70 years, designing and manufacturing an impressive average of 8,000 annually. It places a strong emphasis on delivering the highest quality textile machinery, underpinned by a commitment to research and development that ensures the use of cutting-edge products, technologies and processes in its machines.

Vickers Oils, based in Leeds, West Yorkshire, shares these values, leading the industry in quality and assurance through its continuous focus on research and development, technological leadership, quality control and customer service. As it has done for almost two centuries – the company will mark its 200th anniversary in 2028.

Lonati is now officially recommending VICKERLUBE SOCK 46 for use in its single-cylinder GOAL series of knitting machines, marking a successful collaboration that required dedicated efforts from the teams of Lonati, Vickers Oils and its Italian representative Lubrogamma. Vickers Oils is committed to sustainable product development and VICKERLUBE SOCK 46 meets the clearly defined criteria set out by the Global Organic Textile Standard (GOTS) and conforms to ZDHC MRSL Level 1 certification.

ITMA ASIA + CITME, Asia’s leading trade fair for textile machinery, took place in Shanghai with a considerable presence of VDMA member companies. The round about 40 exhibiting VDMA members covered nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing. They were part of a strong German presence with a total of around 60 German exhibitors – including non-machine manufacturers.

During a press conference on the first day of the show, Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association and managing director of August Herzog Maschinenfabrik expressed: “After years of cancelled or postponed trade fairs and travel restrictions, this year’s ITMA ASIA + CITME is the first edition of the show that can be attended not just by Chinese but by visitors from various countries and regions. The event is a good opportunity to meet customers and partners again in person and not just on a screen. ITMA ASIA + CITME provides a good chance to deepen the already good relations with China and other Asian countries further and to set-up new partnerships.”

Dr. Horn continued to present latest facts and figures about the German textile machinery industry. Between January and August 2023, the overall exports of textile machinery and accessories summed up to 1.7 billion euros, which was a slight decrease compared to the same period in 2022. The shipping to almost all major markets decreased between January and August: China: 440 million € (2022: 453 million €), Turkey: 205 million € (2022: 265 million €), USA: 177 million € (2022: 144 million €), India: 170 million € (2022: 228 million €).

Numerous VDMA member companies have production sites in the major Asian markets China and India and serve their customers in these countries from there. A latest VDMA business climate survey among the textile machinery companies in China showed, that 75% of all participants assessed their current business situation as either good (6%) or satisfactory (69%). For the coming quarter, 50% of the companies see the market to decline. Asked about the business situation during the next six months, 44% of the companies expect the market to remain stable, 56% expect the situation to become worse. This is also reflected in the HR of the companies: 63% expect the number of employees to remain unchanged.

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

Market proximity
Swiss companies realized many years ago that geographical proximity is the key to success. Stäubli has started to set up offices in Chinese cities since 1998 and counts 12 locations today, to serve the whole country. In 2002, Itema established a centralized local branch which today has 160 employees in various functions. Loepfe has expanded its presence by creating an independent local business unit to overcome the 9,000 km distance by air, while Uster Technologies has had a Chinese subsidiary since 1982, with offices and service stations in different provinces. Luwa set up its offices and workshop in Shanghai in 1997. Rieter established a presence in mainland China in 2005, driven by a strong commitment to expanding the country’s know-how and expertise – and ten years later opened an advanced research center. All Swiss companies with serious business goals in China have made similar commitments to connect with customers and maintain strong relationships.

Understanding Chinese customers
Swiss companies also understand that Chinese customers require dedicated attention, and that speed is more essential than ever in delivering both machines and services.
Manufacturers in China are seeking cost-effective solutions to remain competitive, while consumers are looking for value in their purchases. Companies need to develop solutions that provide tangible economic benefits to their clients. Furthermore, energy savings have become paramount in China, due to the government's commitment to environmental sustainability and reduced carbon emissions. “Businesses are adopting more energy-efficient processes and technologies to meet stringent energy conservation and emission reduction targets,” says Peter Schnickmann, Managing Director at Luwa Air Engineering (Shanghai). He notes an investment trend for solutions helping Chinese companies cut operational costs and minimize their carbon footprint.

To enhance the reputation of both companies and products – and boost the image of the entire industry – the environmental impact needs to decrease. Priorities are saving water and waste, as well as reducing, replacing or completely eliminating the use of harmful substances. China has a strong demand for environmental-friendly solutions and sustainable technologies.

Customer-oriented in weaving
The huge number of Chinese fabric producers calls for an immense volume of weaving machinery to be supplied by international and local providers. Swiss machinery manufacturers hold an impressive share of this business.
Chinese weavers require advanced technology, with increasingly higher standards of efficiency. In weaving preparation, latest solutions match the speed, quality and reliability now wanted. Weaving machines too offer the eco-efficiency, performance, and ease of use needed, with innovations that extend the scope of sustainable weaving, and open-platform systems configurable to weavers’ specific operations. A huge increase in demand for technical textiles in recent years has been driven by applications such as carbon fiber, aramid and glass fiber.

Profitable in spinning
China’s competitive advantages come from its large-scale and integrated manufacturing capabilities, along with the use of advanced automation and digitization technologies. Spinners aim to capitalize on extended market opportunities, with more economical production. The latest air-jet spinning machines serve these goals, allowing exceptionally low production costs per kilogram of yarn, coupled with high flexibility and reliability. Sustainable yarns are in great demand.

The automation trend in spinning mills focuses on connecting production processes. Data is used to ensure the highest quality standards, most efficient raw material usage, reduction of waste, and energy savings. To make spinning mills more competitive, latest solutions combine cutting-edge hardware, data-enabled software and renowned textile expertise.