From the Sector

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

*Please see attached document for more information.

With zwissCLEAN® masks, zwissTEX is a pioneer among manufacturers of antiviral and antibacterial oronasal masks. Unlike conventional models they actively and highly effectively eliminate viruses and bacteria thanks to the latest textile technologies. This is made possible by an environmentally friendly finishing that foregoes the use of silver and zinc. "The formula physically interrupts the cell membrane of the viruses and bacteria - so no development of resistance is possible. In this way 99.9 percent of viruses and bacteria are eliminated within a very short time," says Maximilian Schönfließ - Business Development Manager of zwissTEX.

The zwissCLEAN MASK BASIC is particularly suitable when a mask is to be worn over a longer period of time - whether for school, concerts, trade fair visits or air travel. "The special feature of our zwissCLEAN MASK BASIC is that it can be worn for up to 12 hours without any problems due to the breathable material", says Schönfließ. "With it even sleeping is possible. And unlike disposable masks it can be washed up to 10 times at 30 degrees. Disposal by type is also possible".

The zwissCLEAN MASK COMFORT is recommended for daily protection at shopping, on public transport, at business appointments or similar events. It consists of a three-layer structure and combines efficient antiviral protection with long-term wearing comfort. The outer material and the integrated fleece promote protection against viruses and bacteria. The lower material made of organic cotton guarantees a lasting pleasant feeling on the skin. The mask can be washed up to 30 times, thus replacing up to 210 disposable masks and saving resources sustainably.

Zwei der führenden Anbieter von Hoteltextilien in Europa, das dänische Unternehmen Beirholms Væverier und das Deutsch/Niederländische Unternehmen Dibella, starten eine Zusammenarbeit mit dem schwedischen Unternehmen Reused Remade. Reused Remade ist für seine klimaschonenden Textiltaschen aus wiederverwendeter Hotelbettwäsche bekannt. Gemeinsam werden sie den Lebenszyklus von Hoteltextilien verlängern und zur Kreislaufwirtschaft beitragen, indem sie ausrangierte Textilien aus Textilserviceunternehmen zu neuen Textiltaschen für den Einzelhandel aufbereiten.

In Europa werden jedes Jahr Millionen Tonnen ausrangierter Hotelbettwäsche entsorgt, die aus Verschleißgründen nicht mehr im Hotelbetrieb verwendet werden können. Dank der zum Patent angemeldeten Methode von Reused Remade, Hotelbettwäsche zu hochwertigen Textiltaschen zu recyceln, werden enorme Mengen an natürlichen Ressourcen eingespart. Eine klimafreundliche Alternative zur heutigen Entsorgung oder zum üblichen „downcycling“ zu Putzlappen oder Dämmmaterial.

Bis 2025 werden alle EU-Mitgliedsstaaten eine Produzentenverantwortung der Hersteller für Textilien eingeführt haben. Dies wird besondere Anforderungen an die betroffenen Industrien stellen, gemeinsam intelligente Lösungen zu finden und zum Übergang in eine Kreislaufwirtschaft beizutragen. Beirholm und Dibella haben beide seit jeher einen starken Fokus auf Nachhaltigkeit und forschen nach neuen und intelligenten Lösungen für die ausrangierten Textilien ihrer Kunden. Zweck dieser besonderen Partnerschaft ist es, es mehr Textilserviceunternehmen in Europa zu ermöglichen, sich der zirkulären Lösung von Reused Remade anzuschließen und aus der ausgemusterten Hotelbettwäsche klimafreundliche Textiltaschen zu produzieren.

Mit einem beeindruckenden Wachstum seit der Gründung im Jahr 2016 sind die Textiltaschen von Reused Remade für den täglichen Gebrauch jetzt bei bekannten nordischen und europäischen Einzelhändlern wie Edeka, Clas Ohlson, Ica und Systembolaget zu finden.

„Das Ziel für 2021 ist es, 300 Tonnen Hotelbettwäsche zu sammeln, um die Nachfrage unserer Kunden zu befriedigen. Es fühlt sich fantastisch an, mit Beirholm und Dibella zusammenarbeiten zu können, deren Werte wir in Bezug auf Nachhaltigkeit teilen. Wir sehen, dass wir gemeinsam einen großen Unterschied für unsere Umwelt, unser Klima und unsere gemeinsame Zukunft machen können“, sagen Pia Walter und Josephine Alhanko, die Gründer von Reused Remade.

Weitere Information finden Sie im Anhang

• zwissTEX adds zwissCLEAN MASK BASIC to the zwissCLEAN® antiviral and antibacterial range

zwissTEX is adding a BASIC mask to the zwissCLEAN® range which is particularly suitable when a mask is to be worn over a longer period of time - whether for school, concerts, trade fair visits or air travel. "The special feature of our zwissCLEAN MASK BASIC is that it can be worn for up to 12 hours without any problems due to the breathable material", says Maximilian Schönfließ - Business Development Manager of zwissTEX. "With it even sleeping is possible. And unlike disposable masks it can be washed up to 10 times at 30 degrees. Disposal by type is also possible".

With zwissCLEAN® masks, zwissTEX is a pioneer among manufacturers of antiviral and antibacterial oronasal masks. Unlike conventional models they actively and highly effectively eliminate viruses and bacteria thanks to the latest textile technologies. This is made possible by an environmentally friendly finishing that foregoes the use of silver and zinc. "The formula physically interrupts the cell membrane of the viruses and bacteria - so no development of resistance is possible. In this way 99.9 percent of viruses and bacteria are eliminated within a very short time," says Schönfließ.

The zwissCLEAN MASK COMFORT is recommended for daily protection at shopping, on public transport, at business appointments or similar events. It consists of a three-layer structure and combines efficient antiviral protection with long-term wearing comfort. The outer material and the integrated fleece promote protection against viruses and bacteria. The lower material made of organic cotton guarantees a lasting pleasant feeling on the skin. The mask can be washed up to 30 times, thus replacing up to 210 disposable masks and saving resources sustainably.

The zwissCLEAN® range is being continuously expanded. "In addition to mask production we plan to manufacture antiviral and antibacterial gloves," says Schönfließ. "The test phase is already underway and we will start production of the gloves in the coming weeks.

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Mr Atte Virtanen has been appointed Head of Business Development at the Fortum Bio2X bioeconomy programme as of 1 May 2020. Atte will play a key role in establishing Bio2X partnerships, helping partners to advance more sustainable businesses, as well as developing industrial biorefinery operations together with the programme team.

Before joining Fortum, Atte was working 10 years in the Netherlands for Trespa International B.V and in Italy for Arpa Industriale S.p.A. In both companies, he was leading R&D activities in the areas of cellulose materials and thermosetting resins. In addition, Atte gained experience from production environment during his time at Stora Enso’s Kotka mills, where he worked several years both in paper production and in a paper impregnating plant.

Over the years, Fortum Bio2X has built a team with a focus on research and development, including piloting different production technologies. The programme is now moving on to the next phase by developing competencies in operations and maintenance. As part of this phase, Atte will help to shift the attention to commercializing the biomass fractions.

The Bio2X programme is part of Fortum’s strategy to build options for significant new businesses that improve resource efficiency and provide smart solutions. It aims to be the straw refiner with superior material efficiency and a leading supplier of responsible textile fibres. Bio2X focuses on an efficient use of the cellulose, hemicellulose and lignin fractions in order to replace fossil or otherwise detrimental raw materials in numerous end-use applications.

• Historically difficult market environment – trade tensions put textile value chain under pressure in 2019
• Prices for standard viscose at a historic low
• Positive development of the specialty fiber business with a revenue share of already 51.6 percent
• Strategic investment projects are progressing according to plan
• sCore TEN targets for 2024 defined – EBITDA of EUR 800 mn

Despite a generally difficult demand environment for textile fibers and a drastic drop in prices for standard viscose, the Lenzing Group recorded a solid business development in 2019. The disciplined implementation of the sCore TEN corporate strategy and the accompanying focus on specialty fibers once again helped to mitigate the effect of unprecedentedly low standard viscose prices.
As a result, revenue dropped by 3.3 percent from EUR 2.18 bn to EUR 2.11 bn in 2019, driven by lower selling prices as well as standard fiber volumes. Due to positive mix effects and more resilient specialty fiber prices, the share of specialty fibers increased from 45.5 percent to 51.6 percent of revenue.
The earnings development was largely influenced by the decline in revenue, but also by negative currency effects on material and personnel costs. EBITDA (earnings before interest, tax, depreciation and amortization) fell by 14.4 percent from EUR 382 mn to EUR 326.9 mn. The EBITDA margin declined from 17.6 percent to 15.5 percent. Net profit, at EUR 114.9 mn, was 22.4 percent lower than in the previous year at EUR 148.2 mn. Earnings per share amounted to EUR 4.63 (2018: EUR 5.61).

A successful autumn season for Sappi at a collection of trade fairs, with exceptional interest shown in innovative packaging papers

Sappi Europe has presented its solutions for sustainable, future-oriented packaging at three trade fairs in the past few weeks. The globally operating paper specialist’s extensive product range has been serving as a benchmark in the industry for years and now includes the functional barrier papers from the Sappi Guard family, the sealable packaging paper Sappi Seal and the folding boxboard Atelier. The showcasing of innovations in sustainable packaging papers will continue at interpack in Düsseldorf in May 2020.

“Environmentally friendly packaging” was the first leading theme of FachPack, which, according to Messe Nürnberg, really had its finger on the pulse. This theme also was given top priority by visitors that were attracted to the Sappi stand, by its wide range of innovative and sustainable application solutions.

Huge demand for specific projects
Almost fifty per cent more branded goods manufacturers, converters, established customers and interested parties visited the FachPack stand in Nuremberg compared to the previous year – with specific projects in mind. For those planning to replace composite packaging with a paper-based solution with integrated functionality, Sappi presented its Sappi Guard barrierpapers and highlighted some related best practice references. This included the packaging solution for a new nut-fruit bar, recently introduced to the market, from a well-known brand manufacturer. The Sappi Guard range includes Sappi Guard M and Sappi Guard MS with a mineral oil barrier (MOB) and a grease barrier of Kit 11 or Kit 7. All Guard papers guarantee very high product safety and can be completely recycled. The integrated heat sealability was the focus of the development of Sappi Seal. René Köhler, Head of Business Development Packaging and Speciality Papers at Sappi, says: “Reducing the consumption of fossil resources in packaging is a major concern for Sappi. On this account, we developed Sappi Seal, a functional paper with integrated heat sealing functionality which is integrated in the form of a dispersion coating on the reverse side of the paper and can replace papers with a PE coating.” Sappi presented a wide range of successfully completed projects in order to demonstrate the specific application of this paper to the trade fair visitors.

• Continued positive development of specialties business with revenue share of already more than 48 percent
• Commitment to long-term growth plan – investment in new 100,000 tons plant in Thailand approved
• Significantly more challenging market environment for standard viscose with historically low prices
• Outlook for 2019 confirmed

The Lenzing Group continued its solid business development in the first half of 2019. Despite a significantly more challenging market environment with historically low prices for standard viscose, Lenzing recorded a slight increase in revenue. The disciplined implementation of the sCore TEN strategy and the focus on specialty fibers continue to have a positive impact. Thanks to ongoing high demand for sustainably produced specialty fibers and positive currency effects, the impact of low standard viscose prices was largely offset in earnings.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.