From the Sector

In a new study, Empa researcher Dominik Brunner, together with colleagues from Utrecht University and the Austrian Central Institute for Meteorology and Geophysics, is investigating how much plastic is trickling down on us from the atmosphere. According to the study, some nanoplastics travel over 2000 kilometers through the air. According to the figures from the measurements about 43 trillion miniature plastic particles land in Switzerland every year. Researchers still disagree on the exact number. But according to estimates from the study, it could be as much as 3,000 tonnes of nanoplastics that cover Switzerland every year, from the remote Alps to the urban lowlands. These estimates are very high compared to other studies, and more research is needed to verify these numbers

The study is uncharted scientific territory because the spread of nanoplastics through the air is still largely unexplored.

The scientists studied a small area at an altitude of 3106 meters at the top of the mountain "Hoher Sonnenblick" in the "Hohe Tauern" National Park in Austria.
Every day, and in all weather conditions, scientists removed a part of the top layer of snow around a marker at 8 AM and carefully stored it. Contamination of the samples by nanoplastics in the air or on the scientists' clothes was a particular challenge. In the laboratory, the researchers sometimes had to remain motionless when a colleague handled an open sample.

The origin of the tiny particles was traced with the help of European wind and weather data. The researchers could show that the greatest emission of nanoplastics into the atmosphere occurs in densely populated, urban areas. About 30% of the nanoplastic particles measured on the mountain top originate from a radius of 200 kilometers, mainly from cities. However, plastics from the world's oceans apparently also get into the air via the spray of the waves. Around 10% of the particles measured in the study were blown onto the mountain by wind and weather over 2000 kilometers – some of them from the Atlantic.

It is estimated that more than 8300 million tonnes of plastic have been produced worldwide to date, about 60% of which is now waste. This waste erodes through weathering effects and mechanical abrasion from macro- to micro- and nanoparticles. But discarded plastic is far from the only source. Everyday use of plastic products such as packaging and clothing releases nanoplastics. Particles in this size range are so light that their movement in the air can best be compared to gases.

Besides plastics, there are all kinds of other tiny particles. From Sahara sand to brake pads, the world is buzzing through the air as abrasion. It is as yet unclear whether this kind of air pollution poses a potential health threat to humans. Nanoparticles, unlike microparticles, do not just end up in the stomach. They are sucked deep into the lungs through respiration, where their size may allow them to cross the cell-blood barrier and enter the human bloodstream. Whether this is harmful or even dangerous, however, remains to be researched.

Two Italian companies committed to the transition to an ecological industry and presented the results of their collaboration at the Blue of a Kind shop in Milan. A union of intent that has led to a partnership initially born remotely, in the middle of the difficulties of recent years, finally set off through the live painting performance by Erik Varusio. The artist from Vicenza, well-known in the world of fashion and illustration, has customized a selection of Blue of a kind’s t-shirts using the sustainable Officina+39's Recycrom™ dyestuff.

Revolution of existing
Blue of a kind is meant to be not just a fashion company, rather a community built around an idea: to combine uncompromised style, contemporary fit and products with a valuable heritage, and a sustainable production process. The products are made exclusively from vintage products handcrafted with the use of scrap fabrics and surplus, thanks to a network of suppliers all over Europe, which makes it possible to find the best vintage garments and stock, ultimately becoming the raw material to lead a luxury revolution, chic yet sustainable.

Fashion and sustainable chemicals
The mission of Blue of a kind perfectly matches with the technologies of Officina+39, a Biella-based company for which the word “waste” becomes synonymous with opportunity, a source for creating something new, encouraging circularity and reducing environmental impact. From this vision comes to be Recycrom™, a revolutionary and sustainable dyestuffs range, patented, which employs recycled used clothing, fibrous material, and textile scraps: its full range of pigment powders is obtained through a cutting-edge upcycling process that involves textile fibers from used clothing and manufacturing waste for dyeing and printing on cotton, wool, nylon or any cellulosic and natural fiber or blend.

Shared goals
Both companies firmly believe that the present and future of the fashion industry lies in circularity and upcycling without compromise. The sector has been hit hard in recent years by the pandemic and the difficulty in finding raw materials, but opportunities have been generated to think about new partnerships and initiatives, to focus on available resources and real needs, and to invest in sustainable technologies for change.
Being part of this change is the goal shared by Blue of a kind and Officina+39, starting with concrete contributions and more transparent, sustainable, durable and quality products.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

Finland-based circular fashion and textile technology group Infinited Fiber Company has selected AFRY as the main engineering partner for its new flagship factory for producing regenerated textile fibers for leading fashion and apparel brands.

More than 92 million tonnes of textile waste are produced globally every year, with much of it ending up in landfills or incinerators. At the same time, textile fiber demand is increasing rapidly. Infinited Fiber Company’s technology turns cellulose-based raw materials, like cotton-rich textile waste, into a premium regenerated textile fiber that goes by the name Infinna™. The technology, which can be licensed for both new factories and to retrofit existing pulp or viscose production units, offers a solution for eliminating waste and reducing the textile industry’s burden on limited virgin resources.

Infinited Fiber Company currently operates pilot plants in Finland and has announced plans to build a flagship factory there to meet the strong demand from international clothing brands. The flagship factory will be the first of its kind in the world and will use post-consumer textile waste as feedstock. Production is scheduled to begin in 2024. In Finland, the national-level collection of textile waste will begin in 2023, and in the EU, the collection of textile waste will become mandatory in 2025, which will facilitate raw material supply.

The annual production capacity of the plant is planned at 30,000 tonnes of Infinna fiber, which corresponds to the amount of fiber needed for about 100 million t-shirts. Infinited Fiber Company has already sold a significant portion of future production through multi-year sales deals with global fashion brands, who see its regenerated Infinna fiber as an important part of their own circular economy strategies.

AFRY’s assignment includes the basic engineering of the new factory to support the final investment decision. In this basic engineering phase, AFRY will design the combination of several technology and equipment deliveries into one viable plant. AFRY will also provide its AFRY Smart Site services for the digitalization of the factory, utilizing Industry 4.0 technologies to optimize and digitally connect all the factory's processes and operations.

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

One of Gina Tricot's focus is to explore new methods and technologies in sustainability, which makes the collaboration with We aRe Spin Dye feel just right for us. Together we get a product with more durable and circular fibers, in addition with a more sustainable textile production with a focus on minimal water use. We are extremely proud of this collaboration. says Emma Garrote, Global Production & Sustainability Manager at Gina Tricot.

Gina Tricot is a shining example of an agile organization with short decision-making processes. They have managed to enthuse both the design and production department. It has been crucial to reach the launch of this collection that takes place today, says Andreas Andrén, CEO of We aRe SpinDye®.

Gina Tricot
Gina Tricot is a Swedish fashion brand that offers fashion to women in over 30 countries. Today, Gina Tricot has over 160 stores around Sweden, Norway, Denmark and Finland, as well as e-commerce throughout Europe. With around 1,900 employees, 98% of these are girls. For Gina Tricot, it is important to build pride from the inside out, we are a company that chooses to invest in and highlight women.

We aRe Spin Dye
The company is a Swedish cleantech company that provides and offers a process and platform for production and quality control that enables players in the fashion and clothing industry to significantly reduce their environmental impact. The company's business concept is to establish a new, sustainable and transparent standard for dyeing synthetic textiles in the fashion and apparel industry in a simple and user-friendly way.

It looks like a normal shirt, but it has it all: The new SmartTex shirt uses integrated sensors to transfer physiological data from astronauts to Earth via a wireless communication network. In this way, the effects of the space environment on the human cardiovascular system will be evaluated and documented, especially with regard to long-term manned space missions. Developed by the German Aerospace Center (DLR) in cooperation with DSI Aerospace Technology, the Medical Faculty of Bielefeld University and textile research partner Hohenstein, SmartTex will be tested for the first time as part of the Wireless Compose-2 (WICO2) project by German ESA astronaut Dr. Matthias Maurer, who will leave for his ‘Cosmic Kiss’ mission on the International Space Station (ISS) for six months on October 30, 2021.

"We were already able to gain valuable insights into the interaction of the body, clothing and climate under microgravity conditions during the previous projects Spacetex (2014) and Spacetex2 (2018)," explains Hohenstein Senior Scientific Expert Dr. Jan Beringer. The insights provided at the time by the mission of ESA astronaut Dr. Alexander Gerst have now been directly incorporated into the development of the new SmartTex shirt at Hohenstein. "Matthias Maurer can wear his tailor-made shirt comfortably on his body during his everyday work on the International Space Station. For this, we used his body measurements as the basis for our cut development and the production of the shirt. We integrated the necessary sensors as well as data processing and communication modules into the shirt's cut in such a way that they interfere as little as possible and are always positioned in the right place, regardless of the wearing situation. This is the prerequisite for reliably measuring the relevant physiological data." The SmartTex shirt is intended to provide a continuous picture of the vital functions of astronauts. This will be particularly relevant for future long-term manned space missions to the Moon and Mars.

For example, during the BEAT experiment (Ballistocardiography for Extraterrestrial Applications and long-Term missions), Matthias Maurer will be the first astronaut to wear a T-shirt equipped with sensors that measure his ballistocardiographic data such as pulse and relative blood pressure. For this purpose, the sensors were calibrated in the :envihab research facility at the DLR Institute of Aerospace Medicine in Cologne. Details on the contraction rate and opening and closing times of the heart valves, which are normally only accessible via sonography or computer tomography, can also be read from the data material. The goal is to study the effects of the space environment on the human cardiovascular system. To be able to analyse these effects realistically, Matthias Maurer's ballistocardiographic data will be recorded before, during and after his stay on the ISS. For the future, a technology transfer of the SmartTex shirt for application in the field of fitness or even in telemedicine is conceivable.

Wireless Compose-2 (WICO2)
The project was planned and prepared by the German Aerospace Center (DLR) and its cooperation partners DSI Aerospace Technology, Hohenstein and the University of Bielefeld. The wireless communication network reads sensor data and can determine the position of people and objects in space by propagation times of radio pulses. It is also available as a platform for several experiments on the ISS. The determined data is temporarily stored within the network and read out at regular intervals by the astronauts. These data packets are then transferred to Earth via the ISS link and analysed by the research teams. It can generate its own energy from artificial light sources via solar cells.

ESA astronaut Dr. Matthias Maurer in summer 2021 during preliminary talks on the Cosmic Kiss mission in DLR's :envihab in Cologne. © DLR

Sensors measure physiological data during a test run on Earth. © DLR

With the "SmartTex" shirt, astronauts can wear the necessary sensors comfortably on their bodies. © DLR

Dr. Jan Beringer, Hohenstein Senior Scientific Expert. © Hohenstein

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30^th, October 1^st and October 7^th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.

Reifenhäuser Reicofil will exhibit at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. Under the slogan "Living Nonwovens", the nonwoven line specialist will showcase solutions for the production of sustainable nonwovens for a wide range of applications.

Sustainable nonwoven production starts with the amount of material used - the less raw material needed, the better. The "Reicofil 5x" line series is specialized in this application and achieves fabric weights of 8 gsm (grams per square meter) or even less through efficient downgauging, even on 1000 m/min Composite lines containing 3 Spunbond beams.

In addition, Reicofil customers can reduce the use of fossil raw materials on request by processing biobased raw materials as an ecological alternative - for example for diapers. The topsheet material, made of bulky, soft, and industrially compostable high-loft nonwovens, meets maximum hygiene requirements at the same time.

For industrial applications, high-strength nonwovens can be processed even from up to 90% PET flakes from post-consumer waste. This is how Reicofil shows ways to combine sustainability and high-performance nonwovens.

In the medical sector, the line manufacturer will also be exhibiting its leading solutions for high-barrier medical protective clothing. In addition, meltblown nonwovens for face masks - still in great demand in many regions due to Covid - provide reliable safety and are helping to combat the pandemic worldwide. Reicofil technology therefore guarantees maximum safety, with filtration efficiencies of up to 99% (N99 / FFP3 standard), minimum quality fluctuations, and extremely high line availability at the same time.

With the current RF5 machine generation, Reicofil also sets benchmarks in terms of quality, performance, availability, efficiency, and machine intelligence - for challenging applications in hygiene, medical, and industrial sectors.

ROICA™ by Asahi Kasei, specialized in sustainable premium stretch fibers, and Bemberg™, a fiber made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, have been invited to showcase at Filo, the international fair of orthogonal weaving yarns for clothing and furnishings, circular knitwear and technical textiles from the 29-30th of September.

ROICA™ will show its main innovations and four key pieces of the modern and sustainable contemporary wardrobe able to enhance the versatility of the fibers, applied to fashion, sportswear, legwear and underwear.
The brand will also be the protagonist of “The contemporary consumer: Stretch your imagination with ROICA™ by Asahi Kasei smart innovation” speech on September 30th, 11am, organized by the fair to tell its sustainable story.

Bemberg™ will be at Filo showing some selected fabric innovation, and three responsible-driven designers representing different and complementary part of contemporary consumer wardrobe: ZEROBARRACENTO, Maurizio Miri and WAXEWUL.
Bemberg™ will be also involved in two speeches – entitled “Il viaggio di Bemberg™ by Asahi Kasei verso una moda contemporanea, premium e responsabile” - organized by the fair (Sept. 29th and 30th at 4pm), where it will share its story made of creation, production and process, as well as product performance, aspects related to sustainability and circular economy approach.

After being rewarded with the 2021 C.L.A.S.S. Icon Award, Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed in collaboration with C.L.A.S.S. ecohub. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

The inspiration behind this collection is the superhero Tadao – Ana Duarte’s dog – which is the World Keeper fighting against the environmental issues mankind has generated.

With the support of WHITE and its WSM (WHITE Sustainable Milano), Duarte’s creations will be featured online on the digital space of WSM-WHITE website, as well as being shown in a dedicated physical booth on September during Milan Fashion Week. The collection will also be presented on its new brand page on Renoon, an online platform devoted to Responsible Shopping. In addition, Duarte will be supported by IDEE Brand Platform in the development of commercial activities for the SS22 collection.