From the Sector

Reset
397 results
24.11.2021

PERFORMANCE DAYS cancelled in Munich on December 1-2, 2021

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

The new measures are scheduled to come into effect in Munich from the middle of this week, which would lead to very short-term changes. The organizers of PERFORMANCE DAYS therefore see themselves in the responsibility to enable a minimum of planning security as well as a responsible handling of the given situation with this decision.

“Exceptional situations require exceptional decisions – making these all the more difficult. After experiencing a very successful and surprisingly well-attended fair with the Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon last week, we have tried everything possible up to the last moment and firmly believed that we would finally set a further positive milestone with the physical edition of PERFORMANCE DAYS in Munich. We fulfilled all the requirements, updated our hygiene concept several times to comply with the dynamically changing measures and took all the necessary precautions for a safe event. Unfortunately, current developments do not allow us to host the trade fair event next week, since the undisputed top priority is the protection and health of our visitors. Now our focus turns to the full implementation of the Digital Fair on December 1 and 2, 2021”, explains Marco Weichert, CEO of PERFORMANCE DAYS

Focus on digital platform
The PERFORMANCE DAYS team is now investing all its efforts into implementing the Digital Fair on December 1 and 2, 2021. As part of THE LOOP, those interested have the opportunity as of now to view online the fabric innovations and news for the Winter Season 2023/24, this year’s Focus Topic “Sustainable Nylon” and the latest color trends. In the Marketplace, visitors will be able to view the numerous exhibitor products, including the PERFORMANCE FORUM’s curated sustainable fabric highlights. In order to present the fabrics to visitors as realistically as possible in terms of feel, design and structure in digital form, the PERFORMANCE FORUM has been equipped with new 3D-technology, including innovative tools such as 3D images, video animations and downloadable U3M files. Throughout the Digital Fair, exhibitors and fair visitors can look forward to extensive networking opportunities. For example, as part of the extensive digital supporting program on December 1, with various expert talks, discussion rounds and speakers via livestream, moderated by Charles Ross live from the studio. On December 2, the “sustain & innovate” conference on this year’s Focus Topic “The Sustainable Future of Nylon” will kick off with discussions and panels, moderated by Astrid Schlüchter, Editor-in-Chief of SAZsport and SPORTSFASHION by saz.  

A very special thank you goes out to the entire PERFORMANCE DAYS community with its exhibitors, visitors and partners for their active support, trust, loyalty and understanding in these still extraordinary times. The team looks forward to the Digital Fair on December 1 and 2, 2021 and further ahead to meeting you all personally on April 27 and 28, 2022 at the summer edition of PERFORMANCE DAYS live in Munich.

Source:

Performance Days

(c) Avgol
15.11.2021

Avgol at Hygienix™ 2021 with biotransformation technology in nonwovens

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

Avgol, an Indorama Ventures company and manufacturer of high-performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s Hygienix™ event.

Nick Carter, Vice President, Nonwovens Marketing at Avgol, will be a guest speaker at the event, giving a presentation alongside Dr. DeeAnn Nelson, R&D and Innovation Manager with Avgol in North America, on ‘Biotransformation Technology in Polyolefin Fibers and Nonwoven Fabrics, Focus on Fugitive Used Articles’. “Today, the word “sustainability” does not have a unified meaning in the industries we serve,” said Nick. “Perform a regional analysis on any given customer or consumer, delve into a legislative body or advocacy group’s positioning and you will find each are likely to use the word ‘sustainable’ with varying interpretations, implementations, and implications.

The Avgol presentation, part of the Product & Process Innovation in AHPs series, will take place at 2pm on Tuesday, November 16.

From their base at the tabletop event, Nick and the Avgol team will be discussing the global challenge of eliminating incineration, chemical treatment, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

“Following our recent success at Index 20, we will be sharing insight to our research and development strategy with Hygienix attendees, addressing the degradation performance of our products and the path forward for the industry in terms of the use of new bio-colorants, biosurfactants and new technologies. Of course, we will also be demonstrating our latest Forward Innovative Thinking (FITTM) range of hygiene materials too, including natureFITTM”, says Nick Carter.

natureFIT™ is the newest innovation in the Avgol™ technology platform, designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

Hygienix™ runs from 15 – 18 November 2021 at the Westin Kierland Resort in Scottsdale, Arizona, USA.

More information:
Avgol Hygienix™ 2021 nonwovens
Source:

Avgol / PHD Marketing Ltd

08.11.2021

ROICA™ by Asahi Kasei turns 50 and showed latest smart stretch fabric range at MarediModa

Showing its leadership, ROICA™ marks a milestone in the world of stretch, enhancing a contemporary wardrobe made of new generation values that are fully conveyed and visible to the end consumer. Indeed, by creating cutting-edge tools, such as the hangtags that provide, through simple and well-designed icons, clear and concise functional information showing for each application the values and performances of each single ROICA™ families: ROICA Colour Perfect ™, ROICA Resistance™, ROICA Feel Good™, ROICA Eco-Smart™, ROICA Contour™.

On top of this, in order to ASSURE that what is labelled as ROICA™ Sustainable truly reflects the brand’s new generation values, the company created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family. A big step toward complete transparency and transparent AUTHENTIC communication.
ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

Showing its leadership, ROICA™ marks a milestone in the world of stretch, enhancing a contemporary wardrobe made of new generation values that are fully conveyed and visible to the end consumer. Indeed, by creating cutting-edge tools, such as the hangtags that provide, through simple and well-designed icons, clear and concise functional information showing for each application the values and performances of each single ROICA™ families: ROICA Colour Perfect ™, ROICA Resistance™, ROICA Feel Good™, ROICA Eco-Smart™, ROICA Contour™.

On top of this, in order to ASSURE that what is labelled as ROICA™ Sustainable truly reflects the brand’s new generation values, the company created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family. A big step toward complete transparency and transparent AUTHENTIC communication.
ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

At MarediModa – the international fair dedicated to fabrics and accessories for the beachwear, underwear and athleisure sectors - ROICA ™ partners such as Eusebio, Iluna Group, Interjersey Milano, Maglificio Ripa, Penn Textile Solutions GmbH, Piave Maitex and Sofileta shared their latest fabric innovations where sustainability cutting-edge performance and design realized with ROICA™ premium stretch ingredient, were on stage.

08.11.2021

Composites Evolution showcased prepregs and new thermoplastic unidirectional tapes

Composites Evolution exhibited at the Advanced Engineering 2021 show on 3rd - 4th November highlighting its range of prepreg and introducing a new thermoplastic tape manufacturing capability.

Composites Evolution is a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials. A flexible approach allows Composites Evolution to offer short lead times and low minimum order quantities, while decades of combined expertise ensure that in-depth technical support is on-hand when customers need it.

Showcased was a battery box from a high-performance luxury electric vehicle manufactured from Evopreg® PFC bio-based, fire-resistant prepreg, a rear wing from a Ginetta G56 GTA GT4 race car utilising Evopreg® ampliTex™ natural fibre prepreg, and parts fabricated from the company’s newly-launched Evopreg® PA thermoplastic tape range.

Composites Evolution exhibited at the Advanced Engineering 2021 show on 3rd - 4th November highlighting its range of prepreg and introducing a new thermoplastic tape manufacturing capability.

Composites Evolution is a developer, manufacturer and supplier of prepregs for the production of lightweight structures from composite materials. A flexible approach allows Composites Evolution to offer short lead times and low minimum order quantities, while decades of combined expertise ensure that in-depth technical support is on-hand when customers need it.

Showcased was a battery box from a high-performance luxury electric vehicle manufactured from Evopreg® PFC bio-based, fire-resistant prepreg, a rear wing from a Ginetta G56 GTA GT4 race car utilising Evopreg® ampliTex™ natural fibre prepreg, and parts fabricated from the company’s newly-launched Evopreg® PA thermoplastic tape range.

Composites Evolution has a family of specialist prepregs for various applications, including Evopreg® EPC epoxy component prepregs which are a range of pre-impregnated fabrics suitable for moulding into high-performance, lightweight, structural components; Evopreg® EPT epoxy tooling prepregs which have been designed to help composite tooling manufacturers improve the flexibility and efficiency of their tooling manufacturing processes; and Evopreg® PFC fire-retardant prepregs a 100% bio-derived alternative to phenolics for applications where fire performance is a critical requirement.

Evopreg® ampliTex™ combines Composite Evolution’s high-performance Evopreg® epoxy resin systems with Bcomp’s award-winning ampliTex™ flax reinforcements, to deliver a family of materials which offer outstanding performance for component applications.

Composites Evolution launched their new range of Evopreg® PA Thermoplastic Tapes at Advanced Engineering; these are manufactured from polyamide-6 (PA6) polymer with unidirectional carbon fibre and are suitable for automated tape laying, winding and compression moulding into high-performance, lightweight components.

Source:

Composites Evolution Ltd

(c) Messe Frankfurt Japan Ltd
04.11.2021

IFFT/Interior Lifestyle Living closed its doors after three successful days

IFFT/Interior Lifestyle Living has wrapped up three successful days of business at Tokyo Big Sight’s South Halls. From 18 – 20 October 2021, a total of 11,147 visitors found their way to the fairground. Assembling again for the first time since the pandemic began, 300 exhibitors from five different countries and regions welcomed visitors with an extensive and diverse selection of products in 10,390 sqm of gross exhibition space.

IFFT/Interior Lifestyle Living has wrapped up three successful days of business at Tokyo Big Sight’s South Halls. From 18 – 20 October 2021, a total of 11,147 visitors found their way to the fairground. Assembling again for the first time since the pandemic began, 300 exhibitors from five different countries and regions welcomed visitors with an extensive and diverse selection of products in 10,390 sqm of gross exhibition space.

“As the place where designers set trends and decision makers meet, IFFT/Interior Lifestyle Living has once again proven to be the premier trade fair in Japan for the entire living space,” says Mr Yasushi Kajiwara, Managing Director of Messe Frankfurt Japan Ltd. “After last year’s fair was deferred due to the pandemic, we worked hard to present industry buyers with new impulses and ideas at this edition. This included an additional focus on up-and-coming designers at dedicated zones for new talent.”
 
Fresh talent and green living
With products for the entire living space assembled at the fairground, trade buyers were once again spoilt for choice, but a number of product zones in particular were worthy of special attention.
As a new initiative for 2021, the renowned Japanese architect Mr Keiji Ashizawa gathered prospective new interior designers and their products at the highly anticipated '+Talents' Zones.
 
To maximise connections, a series of fairground tours were also arranged to bring architects closer to the best new designers and their interior products for the Japanese market. A new 'Ethical' Zone was also introduced to spotlight green living, up-cycling, fair trade, and more.

Source:

Messe Frankfurt Japan Ltd / Messe Frankfurt (HK)

(c) CHIC / JANDALI
29.10.2021

CHIC fueled fashion business in Shanghai and Shenzhen

  • CHIC Shanghai successfully completed under high safety and hygiene conditions
  • The trend hotspot for the Chinese sales market: Lively interest of more than 20,000 trade visitors in the new collections of the 487 brands at the NECC in Shanghai
  • Sustainability in great demand in all areas
  • CHIC Shenzhen focuses on trading in the strong sales region of South China and the international clusters Hong Kong and Macao: Date postponed from November to December due to current Covid-19 cases in China

The fashion world of China met at the physical event CHIC Shanghai from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai

487 exhibitors presented themselves in clearly structured segments on 50,000 square meters. Maximum compliance with the security measures determined the course. Against this background the exhibitors welcomed more than 20,000 trade visitors and reported cheerful orders.

The 487 exhibitors were also satisfied with the business activity and reported successful orders.

  • CHIC Shanghai successfully completed under high safety and hygiene conditions
  • The trend hotspot for the Chinese sales market: Lively interest of more than 20,000 trade visitors in the new collections of the 487 brands at the NECC in Shanghai
  • Sustainability in great demand in all areas
  • CHIC Shenzhen focuses on trading in the strong sales region of South China and the international clusters Hong Kong and Macao: Date postponed from November to December due to current Covid-19 cases in China

The fashion world of China met at the physical event CHIC Shanghai from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai

487 exhibitors presented themselves in clearly structured segments on 50,000 square meters. Maximum compliance with the security measures determined the course. Against this background the exhibitors welcomed more than 20,000 trade visitors and reported cheerful orders.

The 487 exhibitors were also satisfied with the business activity and reported successful orders.

Perfect presentation platform: the CHIC Matching area
The expanded matchmaking events at CHIC were also enthusiastically received.
In total, over 37 matchmaking events took place in the specially set up matching area consisting of several presentation platforms and private negotiation rooms at the fair. From company presentations by industry giants such as Shein, through trade fair tours to selected one-on-one discussions, CHIC brought exhibitors and visitors together in a targeted manner. More than 600 participants have been matched by this CHIC event. Among them visitors such as Shein, Walmart, Wang Yi Yan Xuan, Tiktok, BAILIAN GROUP, LIQUN etc, parts of the organizer's broad network.

Continuing growth: sustainable productions
Sustainability is one of the most important consumer trends in China. CHIC played the theme in all exhibition areas; from womenswear, kidswear and menswear to accessories, sustainable collections were represented in all segments.

Design talent and traditional styles
In the IMPULSES area, innovative designer brands showed inspiring trends, high-quality collections and fashion variety like Kmusso, MIJA or Yu Jian Tian with its new design collection made by natural materials such as mulberry silk and wool, presenting the unique traditional Chinese style.

CHIC Shanghai presented the entire range of the fashion business in a total of 12 exhibition segments. This year's acclaimed visual concept, created by lava beijing, has been awarded the Bronze Award of the Hiiibrand Awards 2021 in the Identity category.

Digital tools and physical events
In addition to the on-site trade fair offer, CHIC is expanding its reach through the consistent use of digital tools. The CHIC app combines all the functions needed for a successful trade fair participation, from the digital trade fair catalog and matchmaking to direct appointments and live chats for all participants who cannot be on site.

The next CHIC in Shanghai will take place in March 2022.

Source:

CHIC / JANDALI

(c) RadiciGroup
25.10.2021

RadiciGroup: Sustainable Personal Protective Equipment at A+A

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

Source:

RadiciGroup

(c) INDA
25.10.2021

INDA: Innovations in Hygiene & Personal Care at Hygienix™ 2021

With enthusiastic participant registration and continued strong growth projected in absorbent hygiene & personal care markets, excitement is building for the seventh edition of Hygienix as it returns as an in-person event just weeks away, Nov. 15-18, in Scottsdale, Arizona.

INDA reports that more than 300 participants have signed up to attend the conference with participation expected to approach pre-pandemic levels in the 500 range.

The Hygienix conference program will focus on compelling topics including New Options for a Responsible End-of-Life; Product and Process Innovation in Absorbent Hygiene Products (AHPs); Haptics: Four Approaches to Assessing Feel, and E-Hygiene Advancements; Absorbent Hygiene Products Market Stats, Trends and Policy Insights; Feminine Care: Challenges to the Status Quo; and New Approaches and Unmet Needs in Baby and Incontinence AHPs.

The conference will also feature two nonwovens workshops, a welcome reception and opportunities for 60 tabletop displays with receptions.

With enthusiastic participant registration and continued strong growth projected in absorbent hygiene & personal care markets, excitement is building for the seventh edition of Hygienix as it returns as an in-person event just weeks away, Nov. 15-18, in Scottsdale, Arizona.

INDA reports that more than 300 participants have signed up to attend the conference with participation expected to approach pre-pandemic levels in the 500 range.

The Hygienix conference program will focus on compelling topics including New Options for a Responsible End-of-Life; Product and Process Innovation in Absorbent Hygiene Products (AHPs); Haptics: Four Approaches to Assessing Feel, and E-Hygiene Advancements; Absorbent Hygiene Products Market Stats, Trends and Policy Insights; Feminine Care: Challenges to the Status Quo; and New Approaches and Unmet Needs in Baby and Incontinence AHPs.

The conference will also feature two nonwovens workshops, a welcome reception and opportunities for 60 tabletop displays with receptions.

Hygienix Innovation Award Finalists
Among the conference highlights will be the selection of the Hygienix Innovation Award™. The three finalists are all tapping into key trends that are driving growth in this segment – innovation and sustainability – with products that promote health and a healthy environment.

Award finalists making presentations include:

  • Expandable Core Wrap from Curt G. Joa, Inc. – Chris Nelson, Business Development Manager, will provide an overview of this new patent-pending expandable core wrap design that allows the core to expand within the containment wrap as the product is insulted, regardless of the blended fluff and Superabsorbent Polymer (SAP) ratio.    
  • GlatPure™ Back Sheet from Glatfelter – Vishal Bansal, Ph.D., Vice President, Innovation, will share how this product differs from most back sheets in today’s market that are made from plastic film and nonwovens such as Polyethylene (PE).
  • Kudos Diapers from Kudos – According to Kudos Founder & CEO Amrita Saigal, a typical baby spends over 22,000 hours in diapers before potty training, making the material that touches their skin matter. Kudos is the first and only disposable diaper where baby’s bottom touches 100 percent doctor-recommended, carbon-negative, sensitive-skin-friendly cotton all day versus fossil-fuel-derived plastic
Intertextile Shanghai Home Textiles provided vital business platform (c) Messe Frankfurt (HK) Co Ltd
25.10.2021

Intertextile Shanghai Home Textiles provided vital business platform

Intertextile Shanghai Home Textiles concluded its 27th autumn edition in early October. Held alongside four other concurrent textile shows, the fair was the only major event for this sector able to take place in China during this season, providing a much-needed business platform for 735 exhibitors and 20,106 trade buyers. The fair was held at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd expressed: “Due to the valuable cooperation of many parties and the continued support of our exhibitors and other partners, we were able to hold the fair as scheduled despite a number of challenges. Since the pandemic situation was brought under control in China last year, we have expended considerable resources to ensure our textile fairs still take place to provide trading platforms that connect the global industry. This edition was especially important as it was the only major fair to take place in the country at this time.”

Intertextile Shanghai Home Textiles concluded its 27th autumn edition in early October. Held alongside four other concurrent textile shows, the fair was the only major event for this sector able to take place in China during this season, providing a much-needed business platform for 735 exhibitors and 20,106 trade buyers. The fair was held at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd expressed: “Due to the valuable cooperation of many parties and the continued support of our exhibitors and other partners, we were able to hold the fair as scheduled despite a number of challenges. Since the pandemic situation was brought under control in China last year, we have expended considerable resources to ensure our textile fairs still take place to provide trading platforms that connect the global industry. This edition was especially important as it was the only major fair to take place in the country at this time.”

While a number of international exhibitors participated this year with individual booths, the Belgium Pavilion presented home and contract products and five Chinese regional pavilions from Hangzhou, Shaoxing, Huzhou, Haining, and Tongxiang also featured. Two trend forums also provided inspiration for 2022, while the IKASAS Japanese Home Design Gallery, New Voices of Top Youth Upholstery Designers City Roving Exhibition and China International Fiber Art Exhibition gave further insights into various aspects of the industry.

Fair’s fringe programme highlights sustainability, design and more
As with all of Messe Frankfurt’s textile fairs around the world, sustainability is a big focus. A number of events under this focus took place in the fair’s fringe programme, including a half day forum titled How Sustainable Fashion is Reshaping Lifestyles, with a range of innovative companies and prestigious universities participating as speakers.

The Design Talk session featured a series of presentations from leading international designers, including from China, Japan and Europe, to share their design insights. And a new concept this year, titled New Voices of Top Youth Upholstery Designers – Intertextile Upholstery Design and City Roving Exhibition, showcased the work of six groups of young local designers from across China who presented the interior design ideas of their generation through displays and a forum. And reflecting the changes that continue to accelerate in the industry, a number of e-commerce and cross-border trade events took place, including sessions from the likes of JD Home, AliExpress and Tmall.

The 2022 Intertextile Shanghai Home Textiles – Spring Edition will take place from 9 – 11 March, while the Autumn Edition is scheduled for 23 – 25 August 2022.

22.10.2021

INDEX™20 closes with a clear message for the future

INDEX™20 opened its doors, after an 18 month’ wait, delighted to welcome the nonwoven industry back to Geneva with open arms. The exhibition floor was busting with activity and anticipation at the prospect of new business.  

Over 500 exhibitors from 44 countries were present at the event, premiering their latest innovations. The resounding message was one of a positive outcome and an inspiring vision of the industry’s future across the spectrum of applications sectors.

The industry continued to evolve dramatically during the pandemic, and expectations were high as players from across the industry worldwide came together for the first time since 2017. Exhibitors said their expectations were exceeded, citing the high quality of the visitors present, converging on INDEX™ to conclude new business projects.

INDEX™20 opened its doors, after an 18 month’ wait, delighted to welcome the nonwoven industry back to Geneva with open arms. The exhibition floor was busting with activity and anticipation at the prospect of new business.  

Over 500 exhibitors from 44 countries were present at the event, premiering their latest innovations. The resounding message was one of a positive outcome and an inspiring vision of the industry’s future across the spectrum of applications sectors.

The industry continued to evolve dramatically during the pandemic, and expectations were high as players from across the industry worldwide came together for the first time since 2017. Exhibitors said their expectations were exceeded, citing the high quality of the visitors present, converging on INDEX™ to conclude new business projects.

Over 9,300 visitor entries were recorded on-site, and over a thousand on the virtual platform. 

As the industry’s first hybrid industry event, many attendees made the most of the interactive INDEX™ virtual platform by arranging video meetings and messaging as well live exchanges. It also meant those unable to attend personally benefitted from the rich Sector Seminar programme and a wide variety Exhibitor Product Presentations.

The Innovation Lab opened its doors for the first time, demonstrating the sheer diversity of applications in which nonwovens are employed. The spotlight was on nominees of the INDEX™ Innovation Awards, and the winners presented with their coveted bronze statues designed by Belgian artist Olivier Strebelle. This initiative demonstrates the innovative properties and uses of nonwovens across a wide range of sectors, demonstrating the exciting future of the industry and its suppliers.

INDEX™23 will take place from 18 to 21 April 2023.

More information:
INDEX nonwovens events hybrid
Source:

INDEX™20 / Organisers Palexpo SA

SHIMA SEIKI to Exhibit at A+A 2021 (c)SHIMA SEIKI
Cut Resistant Apron
20.10.2021

SHIMA SEIKI to Exhibit at A+A 2021

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, through its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will participate in the A+A 2021 International Trade Fair for Safety, Security and Health at Work in Düsseldorf, Germany.

Having achieved recognition as an innovation leader in the flat knitting industry through pioneering inventions such as the world’s first DSCS® Digital Stitch Control System and seam-free WHoLEGARMEnT® knitting, SHIMA SEIKI has entered the field of technical textiles by proposing knitting as an alternative to other manufacturing methods. Through breakthroughs in original hardware and software technology as well as research in new materials, what was impossible to knit in the past can now not only be knit; it can be made to perform even better.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, through its Italian subsidiary SHIMA SEIKI ITALIA S.p.A., will participate in the A+A 2021 International Trade Fair for Safety, Security and Health at Work in Düsseldorf, Germany.

Having achieved recognition as an innovation leader in the flat knitting industry through pioneering inventions such as the world’s first DSCS® Digital Stitch Control System and seam-free WHoLEGARMEnT® knitting, SHIMA SEIKI has entered the field of technical textiles by proposing knitting as an alternative to other manufacturing methods. Through breakthroughs in original hardware and software technology as well as research in new materials, what was impossible to knit in the past can now not only be knit; it can be made to perform even better.

On display will be the company’s SVR123SP computerized flat knitting machine featuring a dedicated loop presser bed that permits full use of inlay technique for the production of hybrid fabrics that feature both knit and weave characteristics, suited to the production of safety-oriented functional fabrics. SVR123SP furthermore features i-Plating inverse-plating capability for increased patterning capability, including the production of jacquard-like patterns in light-weight plain jersey stitch. A variety of knit samples produced on SVR123SP will be presented at A+A featuring anti-bacterial, fireproof and cut-resistant fabrics, including a light-weight cut-resistant apron as an alternative proposal to current heavy vinyl aprons used in the meat packing industry. Safety glove samples knitted on SHIMA SEIKI’s glove knitting  Machine will be presented as well.

Also demonstrated will be SHIMA SEIKI’s SDS-onE APEX4 3D design system. APEX4’s capability for virtual sampling is especially effective in streamlining the production process. Ultra-realistic simulation capability allows the use of virtual samples for evaluating design variations without producing actual samples for each variation. Smart, speedy and sustainable production is possible by minimizing the time, cost and resources normally required with sample-making.

Kornit Digital introduces Presto MAX for sustainable on-demand production (c) Kornit Digital
20.10.2021

Kornit Digital introduces Presto MAX for sustainable on-demand production

Kornit Digital Ltd. announced the release of its Kornit Presto MAX system for sustainable on-demand production of apparel and other textile goods. The new system will make its live debut at Kornit Fashion Week Los Angeles + Industry 4.0 Event, which the company is hosting November 2-5 to showcase technology innovations, partnerships, and proven strategies driving the business case for sustainable, on-demand production of fashion and textile goods worldwide.

Kornit Presto MAX is the first digital print system to offer white printing on colored fabrics, enhancing decoration capabilities for dark colored fabrics more broadly. It is the only single-step solution for direct-to-fabric printing, delivering the highest quality and softest feel with brilliant whites and brighter neon colors. The system is ready to incorporate future iterations and evolutions of XDi technology—3D decorative applications to produce threadless embroidery, high-density, vinyl, screen transfer, and other innovative effects.

Kornit Digital Ltd. announced the release of its Kornit Presto MAX system for sustainable on-demand production of apparel and other textile goods. The new system will make its live debut at Kornit Fashion Week Los Angeles + Industry 4.0 Event, which the company is hosting November 2-5 to showcase technology innovations, partnerships, and proven strategies driving the business case for sustainable, on-demand production of fashion and textile goods worldwide.

Kornit Presto MAX is the first digital print system to offer white printing on colored fabrics, enhancing decoration capabilities for dark colored fabrics more broadly. It is the only single-step solution for direct-to-fabric printing, delivering the highest quality and softest feel with brilliant whites and brighter neon colors. The system is ready to incorporate future iterations and evolutions of XDi technology—3D decorative applications to produce threadless embroidery, high-density, vinyl, screen transfer, and other innovative effects.

Kornit Presto MAX is compatible with natural fabrics, synthetics, and blends, and includes advanced algorithms for smart autonomous calibration, to deliver high-quality results with short cycle times and minimal manual interruptions or defects. The system was devised for compatibility with the KornitX global fulfillment ecosystem to enable anywhere, anytime production, supporting a true distributed production model that fulfills nearer the end consumer, eliminating time and logistical waste from the experience while empowering brands to ensure quality and consistency across all systems and production sites.

Kornit Presto MAX provides the cornerstone of a smart, efficient, sustainable EcoFactory that empowers producers to cover and integrate more parts of the process, from design to finished product, to decrease their carbon footprint, use minimum manpower, and generate less waste. This means eliminating excessive time, labor, and shipping throughout the value chain, enabling proximity production to meet the accelerated demands of a web-driven global marketplace—revealing new sales channels and clever business models to grow the business long-term.

Reifenhäuser Enka Tecnica mit High-End-Komponenten auf der INDEX (c) Reifenhäuser
19.10.2021

Reifenhäuser Enka Tecnica exhibits high-end components at INDEX

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

Reifenhäuser Enka Tecnica will exhibit its wide range of replacement components for spunbond, meltblown, and composite lines at the world's leading nonwovens trade show INDEX in Geneva from October 19 to 22, 2021. The highly specialized custom manufacturer offers high-end technology "Made in Germany" that is 100% compatible with all globally installed lines.

Producers of nonwovens worldwide rely on Enka Tecnica components to manufacture products for complex applications in hygiene, medical or filtration to provide them with access to new profitable markets. Trade-show visitors will gain a detailed insight into the entire range of products, from meltblown and spunbond spinnerets to meltblown cassettes and complete meltblown spinning beams designed with an energy concept optimized for sustainability. The tips and capillaries assure consistent product quality and precision, allowing producers to meet their tolerance specifications reliably and avoid scrap at the same time..

With its refresh service for refurbishing used components, Enka Tecnica not only offers a cost-efficient alternative to new parts, but also extremely fast delivery times, a factor that is often decisive to maintain daily production targets. Visitors to Geneva will be able to see the quality of refresh components displayed at the booth - a meltblown and a spunbond spinneret, half of which has been refurbished. They will be able to see the condition of the capillary holes before and after the refresh through a microscope.

Another trade show highlight includes jet strips for hydroentangling nonwovens. Depending on the application, they are offered in Smart, Advanced, and Premium versions and have a special unique selling point – the strips are fully hardened, whereas competitor products usually only have a hardened surface. This quality advantage results in significantly longer service lives, which is why they are also known on the market as "The World's Hardest Strips”.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

(c) Trevira GmbH
19.10.2021

Indorama at Index 2021 with Sustainability Portfolio

The Hygiene Fibers Group of Indorama Ventures (IVL) came together at the Index Show to present an all-inclusive range of recycled and biodegradable solutions for Hygiene Fiber and Nonwoven applications.

The combination of polymers, technologies, processes and global reach supported by the Hygiene Fibers Group – one of three business segments that make up Indorama Ventures – positions it within the Hygiene industry to meet increasingly challenging market demand for innovative sustainable solutions within the hygiene sector. Across the six brands and companies that make up Hygiene Fibers Group – Auriga, Avgol, FiberVisions, Indorama Asia, Trevira and Wellman International – sustainability and supporting customers to achieve circular objectives is integral to all efforts and fundamental to the ethos of the Hygiene business segment.

The Hygiene Fibers Group of Indorama Ventures (IVL) came together at the Index Show to present an all-inclusive range of recycled and biodegradable solutions for Hygiene Fiber and Nonwoven applications.

The combination of polymers, technologies, processes and global reach supported by the Hygiene Fibers Group – one of three business segments that make up Indorama Ventures – positions it within the Hygiene industry to meet increasingly challenging market demand for innovative sustainable solutions within the hygiene sector. Across the six brands and companies that make up Hygiene Fibers Group – Auriga, Avgol, FiberVisions, Indorama Asia, Trevira and Wellman International – sustainability and supporting customers to achieve circular objectives is integral to all efforts and fundamental to the ethos of the Hygiene business segment.

At the Index Show, the Hygiene Fibers Group launched CiCLO®, a textile technology which allows polyester and other synthetic materials to biodegrade like natural materials do in wastewater treatment plant sludge, sea water and landfill conditions, reducing synthetic microfiber pollution generated during washing, and minimizing plastic accumulation in landfills caused by discarded textiles.

In line with the company’s commitment to support customers with high performance products, while also reducing the impact on the environment, several of the  Hygiene Fibers brands, including Wellman International, Trevira GMBH and Auriga, have been working closely over the last 12 months with the IAM team and the CiCLO® technology. Developments have focused on PET and rPET staple fiber and filament sustainable solutions for applications where recycling is particularly challenging, such as Hygiene, Home Textiles and Automotive applications.

Strengthening the profile of biodegradable offerings within the Hygiene Fibers Group’s sustainability portfolio, Trevira introduced a new range of bicomponent fibres based on PLA and PBS (polybutylene succinate) at the Index show. Both biopolymers offer an exceptional technological opportunity in terms of environmental care and sustainability, while delivering optimum performance. Equally to PLA, PBS is recyclable and up to 100% biodegradable under industrial conditions.

Efforts towards supporting customers to achieve circular objectives are a priority within the Hygiene Fibers Group. This is reflected in the recycled fibers expertise deployed across the segment. Four Hygiene Fibers Group brands, IVL Asia, Auriga, Trevira and Wellman International offer an extensive range of 100% recycled, accredited PET fibers, across a multitude of fiber and nonwovens applications.

The development and evolution of sustainable technologies is central to activity across IVL’s Hygiene Fibers Group, with particular focus on sustainable polyolefin solutions. FiberVisions and ES-FIBERVISIONS, leading Polyolefin mono and bico fiber brands and sister company Avgol, have partnered with UK-based Polymateria to commercially harness the innovative ‘biotransformation’ technology pioneered by Polymateria. The patented technology alters the properties of polyolefins to make them biodegradable in a natural process.  Other polyolefin sustainable innovations within the Hygiene Fibers Group were featured at Index include biosurfactant and biocolourant developments being undertaken by the Avgol team with FiberVisons progressing sustainable design solutions, including lightweight, high performance, reduced carbon solutions.

Source:

Trevira GmbH, Indorama Ventures

18.10.2021

Avgol talks to Biotransformation Technology in Nonwovens at Index 2020

Avgol®, an Indorama Ventures company and manufacturer of high performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s IndexTM 20 exhibition.
Avgol will be discussing the global challenge of eliminating incineration, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

natureFIT™ is the newest innovation in the Avgol technology platform designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

The Index 20 expo will be held on 19 – 22nd October 2021 at Palexpo Geneva.

Avgol®, an Indorama Ventures company and manufacturer of high performance nonwoven fabric solutions, will be showcasing its latest work in biotransformation technology for polyolefin fibers and nonwoven fabrics at this year’s IndexTM 20 exhibition.
Avgol will be discussing the global challenge of eliminating incineration, landfill, dumping and, in particular, fugitive material pollution from non-woven products.

natureFIT™ is the newest innovation in the Avgol technology platform designed to imbue nonwoven fabrics with additional qualities and benefits that anticipate the shifting demands of the consumer-led retail space. The suite of fabric solutions is focused on replacing elements of spun melt fabric design, where possible, with natural alternatives. The advanced technology affords product designers a significant reduction in polymer consumption to reduce environmental impact while simultaneously enhancing softness and conformability.

The Index 20 expo will be held on 19 – 22nd October 2021 at Palexpo Geneva.

Source:

Avgol / PHD Marketing Ltd

14.10.2021

Baldwin brings new connected technology to FEFCO Technical Seminar

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

For wide-format flexo corrugated box printing, Baldwin’s AMS Spectral UV has engineered CorruCure™, a new generation of LEDUV technology that offers more than a 60% reduction in power consumption in an ultra-compact UV lamp head. This revolutionary solid-state curing system, designed specifically for corrugated LED printing, emits almost no heat or ozone, and accommodates width-switching. It also enables the curing of high-value decorative solutions, such as full-gloss, spot and matte coating effects on a variety of corrugated substrates, making it the ideal addition for product enhancement.

Lastly, Baldwin’s FlexoDry2™ infrared dryer, developed for corrugated flexo printing presses, utilizes patented Diamond IR lamps capable of reducing energy consumption by up to 30%, when compared to traditional IR dryers with aluminum or gold reflectors. Dramatically improved drying enhances color definition, and reduces or eliminates marking, while allowing full-speed printing. The system offers an optional integrated hot-air knife with temperature control to provide better surface drying. Taking safety into consideration, the FlexoDry2 comes with an integrated safety light curtain as standard and an optional camera vision system.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

13.10.2021

Mahlo at the Innovative Textile and Apparel Show

For the second time the Innovative Textile and Apparel Show opens its virtual fairground this year. For the second time, Mahlo takes the chance to get in contact with customers from all over the world. Mahlo will present the latest systems and solutions for efficient and high-quality textile production and finishing, with the focus on process optimisation in a digital environment.

In the textile industry, Mahlo is known for high-quality automatic weft straighteners, whether roller or needle straighteners, whether for the finest textiles or heavy fabrics - interested parties can find out about the right equipment for their specific requirements.

Process control systems such as the Patcontrol PCS for pattern recognition and the Famacont PMC for controlling weft and stitch course density also contribute to textile production and finishing. Mahlo wants to support manufacturers in optimising their production processes and thus also the end product in a cost-efficient way.

For the second time the Innovative Textile and Apparel Show opens its virtual fairground this year. For the second time, Mahlo takes the chance to get in contact with customers from all over the world. Mahlo will present the latest systems and solutions for efficient and high-quality textile production and finishing, with the focus on process optimisation in a digital environment.

In the textile industry, Mahlo is known for high-quality automatic weft straighteners, whether roller or needle straighteners, whether for the finest textiles or heavy fabrics - interested parties can find out about the right equipment for their specific requirements.

Process control systems such as the Patcontrol PCS for pattern recognition and the Famacont PMC for controlling weft and stitch course density also contribute to textile production and finishing. Mahlo wants to support manufacturers in optimising their production processes and thus also the end product in a cost-efficient way.

Solutions for technical textiles and nonwovens
Support in the production process is also available for technical textiles and nonwovens. The focus here is on the Qualiscan QMS quality measurement system. The modularly designed system, which consists of sensors and measuring frames, measures, logs and controls critical parameters such as basis weight, moisture or layer thickness across the entire fabric width. Depending on the application and task, different measuring methods are used for this purpose.

Source:

Mahlo GmbH + Co. KG

From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability (c) DUARTE
Duarte - SS22 collection
13.10.2021

Duarte - SS22 collection

  • From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability

After being rewarded with the 2021 C.L.A.S.S. Icon Award, the Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed with C.L.A.S.S. ecohub support. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

  • From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability

After being rewarded with the 2021 C.L.A.S.S. Icon Award, the Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed with C.L.A.S.S. ecohub support. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

The inspiration behind the collection is the superhero Tadao - Ana Duarte’s dog, an English Cocker Spaniel - which is the World Keeper fighting against the environmental issues mankind has generated. Like a protector of sustainability, it battles modern monsters as Smog Man, Fire Man, Deforestation Man and Wave man, who respectively represent the issues of air pollution, climate change, forest destruction and water overconsumption. A very simple, direct and engaging way of talking about hot topics and simple, direct solutions.

The collection is made of 20 outfits, mainly unisex apart from some of them typically feminine as the crop tops. Hints of bright red and mustard yellow are alternated with denim, grey and pale azure tones, blending in with the colorful prints. Accents of black - used in inserts or as piping - seem to emphasize the outline of the garments. The different textures of the materials create a sense of movement, further enhanced by the unique patterns. All the garments’ prints are exclusively designed by the designer, following each collection inspiration: this time, they recall urban landscapes and the appeal of big metropolis, with Tadao as protagonist in prints, patches and ankle socks.

Among the most representative Duarte outfits we find:

  • A matching sweater with trousers made of Newlife™, a yarn 100% made In Italy coming only from post- consumer, traceable plastic bottles.
  • A unisex oversized bomber is crafted from Newlife™, lined with precious 100% Bemberg™ by Asahi Kasei fabric by Gianni Crespi Foderami and matched with printed neoprene hoodie and shorts.
  • Long-panelled unisex coat and trousers made with ReLAST® denim by Candiani, a responsible textile featuring a premium recycled stretch yarn, ROICA™ by Asahi Kasei. The coat is lined with a fabric by Gianni Crespi Foderami in 100% Bemberg™ by Asahi Kasei, a new generation material made from the smart-tech transformation of cotton linter.
  • The same sustainable stretch yarn is implied in the responsible tulle by Iluna Group, and featured in a shorts and top women’s ensemble, paired with a neoprene printed bomber. The tulle is skillfully matched with 100% Tencel™ back in the loop fabric by Maeba International underneath it.

Ana Duarte is part of a new generation of designers with a new approach to sourcing and production: her research goes into different kind of business models to fit her responsible innovation and style needs at the same time. That’s why in her collection we can find amazing and unique combination of organic, recycled, Back in The Loop, innovative materials that are the right choice for the look&touch and the performance she’s looking for. The result is cool yet respecting people and the environment in full traceability thanks to certified and sometimes even circular solutions. Working with components from various sources and business models requires a certain expertise and a particular sensibility we find in Ana Duarte’s design solutions and in her responsible interpretation of streetwear.

13.10.2021

Launch of EFI Reggiani TERRA Silver

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

  • EFI Reggiani TERRA Silver Makes Debut at Fespa Global Print Expo 2021 for a Short, Smart and Green Process
  • The new, industrial, entry-level EFI™ Reggiani TERRA Silver textile printer from Electronics For Imaging, Inc. is making its debut at the Fespa Global Print Expo 2021 tradeshow, 12-15 October at RAI Amsterdam.
  • The EFI Reggiani TERRA Silver uses unique TERRA pigment ink for high-quality, highly sustainable direct-to-textile printing without steaming or washing.       

“This is one of the first trade shows to return after the pandemic, and we are very excited to again meet customers in person and showcase an innovative offering that delivers superior printing results while using less time, water and energy,” said EFI Reggiani Vice President and General Manager Adele Genoni. “We are introducing this advanced EFI Reggiani TERRA Silver solution to the many print service providers at Fespa, presenting them with an ideal path to enter the industrial textile segment with a short, smart and green production process.”

The new-version TERRA Silver printer is part of EFI’s complete TERRA line-up of pigment ink printer solutions. It is a 180-cm wide printer that can print up to 190 sqm per hour with eight dual-channel printheads. The printer also features:

•    A new recirculating ink system for superior reliability and minimum maintenance
•    Several printing modes to ensure maximum flexibility in terms of design capability
•    New, real-time image processing that eliminates time spent in image pre-calculations
•    A user friendly, intuitive interface
•    A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.

In Fespa stand 1-G71, attendees can see the EFI Reggiani TERRA Silver print smoothly and precisely on knitted and woven fabrics. The printer’s quality is evident in its high-uniformity printing modes, and it delivers numerous features that enhance the production process, including an accurate WYSIWYG interface and flexible queue management.
 
EFI Reggiani is also a leading developer of textile inks. The EFI Reggiani TERRA pigment inks used on the Silver model deliver excellent wet and dry fastness properties and remarkable sharpness in detail. Designed to leverage EFI Reggiani digital printers’ market-proven industrial performance capabilities, these eco-friendly, water-based inks provide an extraordinary level of print durability and yield longer print head life with reduced maintenance costs. The high-performance digital pigment inks also use an innovative binder technology for fast, sustainable, and cost-competitive industrial textile printing on the widest range of fabrics. Users also gain superior print definition and colour intensity.
 
This year, EFI Reggiani celebrates 75 years of heritage and innovation in the textile world. Always committed to deliver to the market new cutting-edge technologies, EFI Reggiani has world-class products offering boosted uptime and reliability, high performance throughput, and remarkable printing uniformity and accuracy – all while helping customers increase the sustainability of their textile manufacturing activities. Green EFI Reggiani processes give users fast, complete and sustainable solutions across a broad range of textile applications.
 
In this 75th anniversary year, EFI Reggiani has also launched several other ground-breaking solutions, such as EFI Reggiani HYPER, the fastest scanning digital printer on the market, and the EFI Reggiani BLAZE, an industrial entry-level, easy-to-use printer designed to give new textile companies the opportunity to adopt digital inkjet production with a compact solution to blaze a successful path into the industry.

Source:

Electronics For Imaging, Inc.

12.10.2021

Röhm: PLEXIGLAS® molding compounds at Fakuma 2021

  • Comprehensive portfolio for innovative vehicle design
  • Material development is keeping pace with technical innovations
  • PLEXIGLAS® Optical HT PMMA special molding compound for the best optical quality at high continuous service temperatures

Vehicle design requirements are changing in line with the huge trends in the industry, such as electric drivetrains and autonomous driving. Materials manufacturers are preparing for this and are developing custom materials – and PLEXIGLAS® special molding compounds from Röhm GmbH are just one example. Between October 12 and 16, the Molding Compounds business unit will be presenting its diverse range of PLEXIGLAS® molding compounds for the automotive sector at Fakuma 2021 in Friedrichshafen.

The brand polymethyl methacrylate (PMMA) from Röhm is both light and robust, has a high-quality surface and can be processed in all common injection molding and extrusion procedures.

  • Comprehensive portfolio for innovative vehicle design
  • Material development is keeping pace with technical innovations
  • PLEXIGLAS® Optical HT PMMA special molding compound for the best optical quality at high continuous service temperatures

Vehicle design requirements are changing in line with the huge trends in the industry, such as electric drivetrains and autonomous driving. Materials manufacturers are preparing for this and are developing custom materials – and PLEXIGLAS® special molding compounds from Röhm GmbH are just one example. Between October 12 and 16, the Molding Compounds business unit will be presenting its diverse range of PLEXIGLAS® molding compounds for the automotive sector at Fakuma 2021 in Friedrichshafen.

The brand polymethyl methacrylate (PMMA) from Röhm is both light and robust, has a high-quality surface and can be processed in all common injection molding and extrusion procedures.

At Fakuma 2021, Röhm will present one of its newest special molding compounds for the first time. PLEXIGLAS® Optical HT was developed specifically for applications with high power LEDs, such as headlamp lenses. With its special characteristics profile, the innovative material guarantees the best possible optical quality even at increased continuous service temperatures.

More information:
Röhm Fakuma PLEXIGLAS® Automotive
Source:

Röhm GmbH