From the Sector

Beaulieu International Group is investing €5 million to transition the fossil based energy supply of its Cushion Vinyl production plant in Wielsbeke, Belgium, to bio mass generated steam supply. A transition to renewable energy. To this end, B.I.G. is collaborating with A&U Energie, a company that converts non-recyclable wood waste into green energy and heat. This strategic move aligns with B.I.G.'s commitment to reach ‘net zero’ for their operations by 2030.

The transition from fossil energy to green steam and the switch to waste gas treatment without direct fossil energy brings significant benefits. First, the switch in technology will lead to 88% reduction in their Belgian Cushion Vinyl carbon footprint related to heat supply and waste gas treatment, compared to the current emissions. Second, the use of steam heating and electric energy provides improved energy efficiency. In addition, the use of steam systems is known for its safety and reliability, providing a safer and more stable heating solution for the Belgian Cushion Vinyl facility. Moreover, the switch to steam and electric energy allows for the use of green electricity in the future, if available.

In addition to transitioning to 100% green energy, Beaulieu International Group is also dedicated to advancing the circular economy. These efforts encompass various initiatives, including increasing the use of recycled and reused materials. For example, 50% of B.I.G.'s PVC floor coverings are already fully recyclable. Additionally, they are actively working to reduce the environmental impact of their solutions by 42% at the end of their life cycle, striving to minimize product emissions to nearly zero, and eliminating pollutants. Recently at the Belgian Flanders Flooring Days, Beauflor launched its Twilight collection, a cushion vinyl floor created with PVC from 100% bio and circular sources resulting in a 40% reduced CO₂ footprint compared to their conventional heterogeneous CV flooring for residential applications

Furthermore, their cushion vinyl brand Beauflor launched the ReLive concept, a specialized program designed for a circular future, ensuring the collection, sorting, and recycling of PVC flooring cutting waste. Currently, this program focuses on post-installation waste and is exclusively available in France, with the goal of expanding its reach to other EU countries.

Through the establishment of strategic partnerships dedicated to finding innovative ways to repurpose waste materials previously slated for incineration, B.I.G. underscores its commitment to sustainable solutions and collaboration with like-minded organizations. 75% of B.I.G.'s post-industrial waste is now being successfully recycled.

drupa 2024 in Düsseldorf drew to a successful close on 7 June after eleven days. 1,643 exhibitors from 52 nations presented a showcase of innovations in the Düsseldorf exhibition halls and thrilled the trade visitors with performances. The international share of the visitors was 80%, with attendees coming from 174 countries. After Europe, Asia was the most strongly represented region with 22%, followed by America with 12%.  Asia as well as Latin America and the MENA region are markets with great growth potential, which was reflected in the significant increase in exhibitors' presence and order books.

Exhibitors praised the high level of decision-making competence of visitors. They, in turn, gave top marks to the range of products and services on offer in the 18 exhibition halls. Around 96% of all visitors confirmed that they had fully achieved the objectives associated with their visit. At over 50%, most of them came from the printing industry, followed by the packaging industry, whose share has increased significantly and which was the focus of many exhibitors as a growth driver. In total, 170,000 trade visitors attended drupa 2024.

Digitalisation
Automation took centre stage at this year’s drupa, with a strong focus on AI and smart workflows, including software solutions. It became clear that digital and analogue technologies ideally complement and benefit from each other. Traditional industry leaders presented a wide range of digital solutions, while digital pioneers integrated conventional components into their offerings. Robotics played an important role in the exhibition halls and illustrated the path towards the smart factory.

Transformation and growth
drupa made it clear that the industry has great potential for the future, even against the backdrop of many challenges, and that the prospects are promising. In the last financial year, the global printing industry achieved a turnover of around EUR 840 billion (source: Smithers) and continues to develop at varying pace worldwide.
Many new strategic alliances concluded at the trade fair reflected the opportunities that are only possible in such a concentrated form at drupa.

Sustainable technologies
Technology is the key to achieving sustainability goals - exhibitors at drupa illustrated this with numerous practice-orientated developments and concrete solutions. Top priority is given to resource efficiency and the path to a functioning circular economy. In addition, Touchpoint Sustainability from the VDMA, the German Machinery and Equipment Manufacturers’ Association, showcased current state of the art innovations, presented best-practice use cases and gave a far-reaching outlook into the future of a sustainable printing industry.

Knowledge transfer
The supporting programme with its five special forums drupa cube, drupa next age (dna) and the Touchpoints Packaging, Textile and Sustainability was well received. In times of constant change and the resulting new business models, they ensured an intensive transfer of knowledge and provided important guidance. Guided tours on various key topics rounded off the trade fair experience.

The next drupa will be held in 2028.

The EU TCLF Social Partners, CEC, Cotance, Euratex and industriAll Europe call for future EU policy makers to increase their ambition to safeguard the European TCLF sectors and keep good industrial jobs in Europe. The TCLF Social Partners are all signatories to the Antwerp Declaration for a European Industrial Deal and express their full support for a European Industrial Deal to complement the Green Deal and keep quality jobs in Europe.

The European TCLF sectors provide over 1.5 million jobs in the EU (Textiles and Clothing: 1,300,000, Tanning and leather: 34,531 and Footwear: 222,000) and have a combined turnover of over €200 bn (T&C: €170 bn, T&L: €7.3 bn and Footwear: €23.2 bn). However, the industries continue to face a range of challenges, including fierce global competition, high energy prices, an ageing workforce, and a huge increase in new legislation. These challenges are especially tough due to over 99% of companies in the TCLF sectors being SMEs. As such, the European Social Partners call for increased focus and commitment in the next EU mandate to ensure that the TCLF sectors can become green and digital while remaining competitive on the global market and that no region, company or worker is left behind.

In relation to the Antwerp Dialogue, CEC, Cotance, Euratex and industriAll Europe have also signed up to a specific joint statement focused on the social dimension of an EU Industrial Deal which is vital to ensure its success and social acceptance. The following demands from the TCLF Social Partners are essential to guaranteeing quality TCLF jobs in Europe:

1. Ensure a Just Transition for our industries and workforce
2. Develop a re-skilling and up-skilling agenda
3. Promote social dialogue and social partners' involvement
4. Ensure a sensible, stable and coherent regulatory environment for our industries
5. Access to energy and raw materials
6. Free and fair trade to ensure a level playing field
7. Sustainability and increased demand for products made in Europe 

At DRUPA in Düsseldorf, BW Converting – formerly BW Converting Solutions – has launched an updated branding identity on the heels of incorporating print and industrial technology company Baldwin into its roster – a portfolio that already includes heavyweights Paper Converting Machine Company (PCMC) and Winkler+Dünnebier (W+D), as well as Hudson-Sharp, STAX Technologies and Northern Engraving and Machine Company.

With a potent mission, BW Converting pledges to do more than just describe the quality of its converting technologies, but also signify a commitment to betterment that reaches outside the factories and extends into the lives of consumers and society.

The rebranding effort positions BW Converting and its brands in a visually strong and structured architecture so customers and markets can quickly grasp the breadth of the capabilities the company can offer, over just individual brands’ strengths.  

“Our mission is to inform our markets about topics which help them bridge the gap between what they know and what they need to know. This starts with the clarity of our mission,” said Simon Blake, VP of Marketing, BW Converting. “Because we change and transform many raw materials from one purpose to a better one, we are supporting all our customers’ and markets’ goals to ‘Change for the better.’”  ¬¬

“The rebrand is a culmination of a focused plan to support customers’ growth through the integration of our knowledge, scale and global footprint over six strong product brands,” said Stan Blakney, Group President, BW Converting. “Customers are looking for a recognizable company that can support them either in one or many technologies. This rebranding will enable them to do that and have a better understanding of why we come and work for BW Converting.”

The EREMA Group, based in Ansfelden near Linz, Austria, closes the financial year 2023/24 with total revenues of EUR 380 million. A joint venture with the Lindner Group sees the group of companies expand its portfolio to include washing technology. EREMA Group GmbH now has eight subsidiaries: EREMA, PURE LOOP, PLASMAC, KEYCYCLE, Lindner Washtech, UMAC, plasticpreneur and 3S.

"With our machines and components, we have now reached a recycling volume of more than 25 million tonnes per year worldwide, which makes a significant contribution to the development of a circular economy for plastics," says Manfred Hackl, CEO of the EREMA Group. The group of companies manufactured 290 extruders for recycling plastic in the past financial year, supplemented by over 100 add-on components such as filter systems and ReFresher anti-odour technology. These recycling solutions generated total sales of EUR 380 million. Around 8,500 machines and components from the group are in operation in more than 100 countries. The EREMA Group employs 950 people worldwide.

Strategic investments in all areas of the plastics recycling industry
In recent years, the EREMA Group has invested in developing specific machines, applications and infrastructure. "The opening of the new R&D Centre in Ansfelden last summer and the new machines in the Customer Technology Center at EREMA North America at the beginning of this year, have seen us complete the largest phase of investment in our history to date. We have invested more than EUR 110 million in the expansion and modernization of our international locations over the past five years," emphasizes Horst Wolfsgruber, CFO of the EREMA Group. Another important milestone is the founding in August 2023 of the holding company BLUEONE Solutions together with the Austrian family-owned company Lindner. Incorporating Lindner Washtech means that the EREMA Group's extensive portfolio now also includes washing technology.

Developments in post consumer and PET recycling
The new DuaFil® Compact technology, which EREMA developed specifically for challenging applications with high levels of contamination and moisture, is proving successful. Since the launch at K 2022, around 20 INTAREMA® TVEplus® DuaFil® Compact systems have been sold. In the post consumer segment, ReFresher technology for the production of odour-optimised recycled pellets is also gaining ground and is now in use worldwide with a total capacity of one million tonnes per year for film and regrind applications. Another interesting new component is the DischargePro control system for the EREMA laser filter, which has been nominated for this year's Plastics Recycling Awards Europe. The discharge control system responds automatically to fluctuations in flow rate during the recycling process and reduces melt loss by up to 50 percent. With its new Fast-Track scheme, EREMA is responding to the demand for machines available at short notice at an attractive price-performance ratio.

For bottle applications, VACUREMA® systems have been proving their performance for 25 years. Over 400 EREMA PET systems for food grade are in operation worldwide, notching up a total capacity of more than 4.5 million tonnes per year. PET recycling is also becoming increasingly important in the textile industry. FibrePro:IV technology was developed especially for fibre-to-fibre recycling, which is used together with machine combinations from EREMA or PURE LOOP, who specialise in shredder-extruder technology, depending on the geometry and contamination of the PET fibre waste. For these applications, the EREMA Group has set up a fibre technical centre at its headquarters in Ansfelden.

Big potential for plastics recycling
The amount of plastic produced worldwide is currently around 400 million tonnes per year - and the figure is still rising. Around 9 percent of it is recycled globally. This represents big potential for the EREMA Group, as Manfred Hackl emphasizes.

The Schneider Group officially launches Authentico® by Schneider Group, a brand that stands for a transparent, verified, traceable, ethical and high-quality wool supply chain. It aims to be recognised as a global brand that enables the fashion industry, together with end-consumers, to choose new levels of premium quality comprising fully traceable and responsible wool, in compliance with a carefully structured approach that verifies, traces and brands the sourcing and manufacturing processes throughout the whole supply chain. Authentico® is based on the Schneider Group global certified network.

To achieve these goals, the Schneider Group has created the Authentico® Verification System, a simple and reliable way to provide criteria and guidelines for all Authentico® supply chain partners including:

• Authentico® Integrity Scheme, best practices for growers’ implementation at farm level. Animal welfare is at the heart of the Authentico® Integrity scheme, together with being mulesing-free, in accordance with The Five Domains. But the scheme goes further and encompasses also land and pasture management and social responsibility. The wool is sourced from carefully selected and highly committed growers, who apply best practices and choose to subscribe to the dedicated Authentico® platform. The selected fibres are processed into tops in the Schneider Group’s own mills located on several continents, which are directly operated and fully certified.
• Authentico® Brand Guidelines, for all other supply chain players (from spinners, weavers and knitters to garment makers, brands and retailers), that include precise criteria set by the Schneider Group to ensure alignment with Authentico® brand values.

In addition, the Schneider Group incorporates the traceability platform TextileGenesis™ within its Authentico® Verification System, to digitally track all incoming and outgoing wool.

The group has developed a marketing & communication plan to support its Authentico® brand. Upcoming events where Authentico® will be featured are: Pitti Filati in June, Milano Unica in July, the Natural Fibre Connect (NFC) in Biella in mid-September and the Textile Exchange Conference at the end of October in Pasadena.

Electronics For Imaging, Inc. reported that at drupa 2024, running through 7 June at Messe Düsseldorf, it is highlighting its expertise in single-pass printing solutions for packaging, display graphics, and textile markets.

Visitors to EFI’s stand will see some of the companies latest single-pass innovations live, including the Packsize® EFI™ X5® Nozomi, a full-colour, on-demand, right-sized box system that prints, cuts, creases, glues, and erects customised boxes at the rate of up to one box every 6 seconds, and the EFI Nozomi 14000 SD single pass printer for sign and display. The company is also showcasing a vast array of applications produced on the new Nozomi 14000 AQ true water-based, single pass printer for corrugated packaging and displays and the Nozomi 12000 MP single-pass technology for direct-to-metal package printing, as well as the next generation EFI Reggiani BOLT XS single-pass textile printer.

In addition to showcasing single-pass inkjet printing at the show, EFI is also introducing two new software solutions that add to the value of single-pass technology, including:

• EFInsight, cloud-based intelligence that optimises the operational efficiency and TCO of EFI packaging, display graphics, or textile digital inkjet printing systems with cloud-based data collection, analytics, reporting, proactive maintenance, and process control tools. It delivers the insights needed to understand the economics of production and the tools to maximise inkjet printer investments. It is currently available for EFI Nozomi single-pass printers for packaging.
• EFI’s Life Cycle Assessment tool for Nozomi printers, which documents Nozomi’s environmental footprint, developed in partnership with Clean Agency. This tool, which EFI customers and their customers can use, analyses their CO2 emissions as part of their overall packaging Extended Producer Responsibility (EPR), and has proven that printing corrugated materials on the EFI Nozomi digital press reduces Global Warming Potential (GWP) by over 50% when compared to analogue printing technologies.

The Fashion for Good Museum publishes its legacy document. The report was prompted by the museum’s closure on June 5th, 2024. It represents the museum’s mission, summarising invaluable insights gathered over six years and key results such as reaching 115.000 visitors and creating a dedicated community of more than 250.000 followers online. Committed to transparency and collaboration, Fashion for Good shares its reflections, tools, and transferable learnings, as well as the future of its collections and next steps, continuing to inspire positive change within the fashion ecosystem. All information can be accessed on the Fashion for Good website for continued use and benefit of educators, the cultural sector, and the wider public.

Looking back on its journey, the Fashion for Good Museum celebrates achievements such as hosting 115.000 visitors, including 8.000 students from 200 schools, curating 13 exhibitions, offering over 75 events, launching 4 educational programmes, reaching both current and future generations, and inspiring many to drive change in the fashion industry. With an earned media value of over 46 million Euros through press coverage since 2017, Fashion for Good's influence has been significant, evident in its 250.000 social media followers and 15.000 newsletter subscribers.

The report fulfils the promise Fashion for Good made in 2017 – to share their journey, learnings, and most impactful activities with the world. Within these pages, readers will discover reflections on their messaging, insights about creative partnerships with entities such as Lowlands Festival, Dutch Design Week, and Museumnacht to case studies of pioneering exhibitions. Their programming was created around themes and topics, such as the untold stories around cotton, circularity, and the future of biomaterials to educate and inspire visitors, ultimately empowering them to take action themselves.

Reflecting on the output of the museum during its short existence, as well as its footprint and wide reach, while acknowledging the challenges encountered during its establishment and development, Fashion for Good distilled six key lessons from Fashion for Good's sustainable museum practices:

• Recognition of Broader Shift: There is a wider movement towards sustainability in the museum sector, exemplified by Fashion for Good and the new ICOM definition.
• Storytelling for Societal Change: Cultural institutions are crucial in driving societal change in fashion consumption through storytelling.
• Innovation through Limitations: Embracing organisational limitations can stimulate innovation in museum collection management and education.
• Audience Engagement: Understanding and expanding the core audience is essential for effective engagement in sustainability initiatives.
• Measuring Impact: It's challenging to measure impact for organisations with social missions, requiring clear success criteria.
• Establishing a Sustainability Framework: Defining sustainability within context is fundamental for organisational sustainability efforts.

• The fully electric vehicle sport EV to incorporate sustainable, flax-based composites to decarbonise manufacturing
• CUPRA Born VZ to have full natural fibre front seats with Bcomp’s high-performance ampliTex™
• Bcomp’s natural fibre materials enable a reduction of 49% of CO₂ emissions in seats’ production compared to previous version

CUPRA announces the use of Bcomp’s innovative natural fibre composite solutions for the new CUP Bucket seats in the CUPRA Born VZ electric vehicles, the latest addition to the Spanish brand’s vehicle line-up.

CUPRA focuses on innovation and sustainability to redefine the automotive industry. This approach is exemplified by the CUPRA Born VZ, which combines powerful performance with eco-friendly design, aiming to inspire a new generation of drivers with its progressive and responsible engineering.

For the car’s interior design, CUPRA’s collaboration with Bcomp and Sabelt, has resulted in the creation of the first full natural fibre CUP Bucket seats in the CUPRA vehicle line-up. By replacing the seatbacks currently made from carbon and glass fibres, the new all-natural fibre seatbacks offer significant reductions in emissions. The use of Bcomp’s proprietary ampliTex™ technical material reduces CO2 emissions by 49% compared to the hybrid version, while also offering end-of-life options. The incorporation of natural fibres offers other benefits including enhanced vibration damping and increased safety, providing a blend of sustainability and high performance.

• CARBIOS, L’OCCITANE en Provence and Pinard Beauty Pack join forces to establish an efficient European value chain for PET circularity
• The 100% biorecycled transparent bottle (from enzymatic recycling) will be on display at CARBIOS’ booth D02 at “Edition Spéciale” by LuxePack, held 4-5 June at the Carreau du Temple in Paris
• A key step towards achieving L'OCCITANE en Provence's eco-design commitment of 100% retail bottles made from 100% post-consumer recycled PET by 2027

CARBIOS and L’OCCITANE en Provence, an international cosmetics brand using natural and organic ingredients and long-term partner of CARBIOS, present a bottle in transparent PET made entirely from enzymatic recycling for a shower oil from the Amande range. In collaboration with converter Pinard Beauty Pack, this bottle exemplifies a shared desire to build en efficient European recycling sector to accelerate the transition to a circular economy for plastic, and meet brands' commitments for more sustainable packaging solutions. The bottle will be on display at CARBIOS’ Stand D02 at “Edition Spéciale” by LuxePack, the trade show dedicated to sustainable premium packaging, to be held on 4-5 June 2024 at the Carreau du Temple in Paris.

The 100% recycled PET bottle from CARBIOS' enzymatic depolymerization process was made with a European value chain committed to responsible consumption of sustainable materials. The bottle’s production began with the local supply of PET waste (already collected, sorted and prepared) to the CARBIOS industrial demonstrator in Clermont-Ferrand, France. The waste used consisted of colored bottles, multilayer trays and mechanical recycling residues, none of which are currently recycled using conventional technologies. CARBIOS deconstructed the PET waste into its original monomers, PTA and MEG, using its biorecycling technology. The resulting monomers were then repolymerized into new, fully recycled PET resins within Europe. In Oyonnax, France, these resins were blow-molded by Pinard Beauty Pack to create bottles according to L’OCCITANE’s specifications, and then filled with its shower oil at its Manosque plant.