From the Sector

Reset
147 results
Photo: SGL Carbon
05.05.2022

SGL Carbon: Dynamic business development in Q1 2022 continued

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

Sales development
In the first three months of fiscal 2022, the sales increase of €29.4 million was driven by all four operating business units: Graphite Solutions (+€11.3 million), Carbon Fibers (+€6.6 million), Composite Solutions (+€7.2 million) and Process Technology (+€6.0 million).
In particular, sales to customers in the automotive and semiconductor industries and a significant recovery in the industrial applications segment were key factors in the increase in sales. Sales of the Process Technology business unit to customers in the chemical industry also developed pleasingly. The effects of the war in Ukraine, which has been ongoing since the end of February 2022, had only a little impact on SGL Carbon's sales performance in the 1st quarter.

Earnings development
Despite the increasingly difficult market environment in the course of Q1 2022, associated with temporary supply and production bottlenecks at their customers, temporarily interrupted transport routes, and significantly higher energy prices, SGL Carbon was able to keep the adjusted EBITDA margin almost stable year-on-year at 13.6%.  
Adjusted EBITDA increased by 11.5% to €36.8 million in the reporting period. Higher capacity utilization in the business units and product mix effects contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation. By contrast, higher raw material, energy and logistics costs as of end of February 2022 had a negative impact on earnings. The Carbon Fibers business unit was particularly affected by the energy price increases. One-time expenses of €9.2 million in conjunction with energy transactions burdened the Carbon Fibers business unit in the 1st quarter of 2022.  
To secure our production and delivery capabilities, around 85% of the energy requirements of the entire SGL Carbon for 2022 are price-hedged.
Adjusted EBITDA and EBIT do not include in total positive one-time effects and special items of €8.5 million, among other things from the termination of a heritable building right to a site no longer in use. Taking into account the one-time effects and special items presented as well as depreciation and amortization of €14.1 million, reported EBIT increased by 83.5% to €31.2 million (Q1 2021: €17.0 million). The net profit for the period developed correspondingly and more than tripled from €6.1 million to €21.4 million in a quarter-on-quarter comparison.

Outlook
The sales and earnings figures for the 1st quarter 2022 confirm the stable demand from different market segments. Price increases and volatility in the availability of raw materials, transportation services and energy were largely offset by savings from the transformation program and pricing initiatives at the customers.
For 2022, SGL Carbon continues to expect volatile raw material and energy prices, which were included in their forecast for 2022 at the time of planning. However, there are uncertainties about the extent and duration to which SGL Carbon and the customers will be affected by the impact of the war in Ukraine or temporary supply chain disruptions due to the lockdowns in China. Therefore, SGL Carbon's outlook for fiscal 2022 does not include supply and/or production interruptions at customers or the impact of a possible energy embargo that cannot be estimated at this time.  
SGL Carbon's forecast also implies that factor cost increases can be at least partially passed on to the customers through pricing initiatives. SGL Carbon has also included the revenue and earnings impact from the expiry of a supply contract with a major automobile manufacturer at the end of June 2022 in our forecast.

Source:

SGL Carbon

Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term. (c) Lectra
Hélène Viot Poirier
04.05.2022

Ross McInnes and Hélène Viot Poirier join Lectra’s Board of Directors

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 

  • Lectra’s Annual Shareholders’ Meeting held on April 29 appointed two new Directors, Ross McInnes and Hélène Viot Poirier, for a four-year term.
  • They both become members of Lectra’s Audit Committee, Nominations Committee and Strategic Committee. Hélène Viot Poirier also becomes a member of the new CSR Committee.

 A major global player in the fashion, automotive and furniture markets, Lectra designs industrial intelligence solutions – software, equipment, data and services – that enable the digital transformation of its customers.
 
In 2017, Lectra launched its Lectra 4.0 strategy with the aim of making the company a key Industry 4.0 player in its markets by 2030. As part of its 2017-2019 roadmap, Lectra successfully integrated key technologies for Industry 4.0 and software solutions in SaaS mode into its offers. The company’s 2020-2022 roadmap should enable it to leverage the full potential of its new offers while ensuring the sustainable and profitable growth of its business.
 
Daniel Harari, Chairman and Chief Executive Officer of Lectra, says: “We are delighted to welcome Ross McInnes and Hélène Viot Poirier to Lectra’s Board of Directors. Through Ross McInnes’ appointment, we will benefit from his extensive experience as a director of listed companies and his knowledge of Lectra’s challenges, as well as his expertise in strategy, management, finance, and governance. Hélène Viot Poirier has extensive knowledge of the digital world and the fashion market. Her appointment will enable the Board of Directors to benefit from her expertise in acquisition strategy, management and the development of environmentally responsible products”.
 
In the last five years, Ross McInnes has been a member of Lectra’s Board of Directors, and a member of the Audit Committee, the Compensation Committee and the Strategic Committee. This first mandate came to an end in April 2020. Ross McInnes is a graduate of the University of Oxford.
 
Since 2020, as an Independent Senior Advisor, she has supported strategic internal and external growth projects in the fashion, digital and consumer goods sectors. Hélène Viot Poirier is a graduate of HEC Paris.

(c) Hexcel Corporation
29.04.2022

Hexcel Composite Solutions for the Automotive, Marine, Wind Energy and Recreation Markets at JEC World 2022

Hexcel will present a wide range of high-performance composite innovations for the Automotive, Marine, Wind Energy and Recreation markets during JEC World 2022 in Paris on May 3 – 5.

Hexcel will present a wide range of high-performance composite innovations for the Automotive, Marine, Wind Energy and Recreation markets during JEC World 2022 in Paris on May 3 – 5.

G-Vent Technology for Marine Structures
Hexcel has developed a new technology for out-of-autoclave (OoA) processing that delivers a game-changing reduction in process time and cost for marine manufacturers without compromising mechanical performance. Hexcel has leveraged its experience in aerospace and wind energy to develop its new G-Vent technology for OoA processing of highly loaded, thick section marine structures such as masts, foils, and wind-assisted ship propulsion (WASP) components. A full range of Hexcel marine prepregs are now available with integrated G-Vent technology, reducing the requirement for debulking steps and ensuring extremely low porosity (<1%) regardless of the laminate thickness. Leading marine non-destructive testing specialists Q.I. Composites recently confirmed that the thick section G-Vent panels they had evaluated had void contents and laminate quality in line with state-of-the-art autoclaved prepreg components. Visitors to the Hexcel stand will see a unique 400mm carbon cube cured in a single stage using 695 layers of HexPly M79 carbon fiber UD600 prepreg with G-Vent technology.

New HexPly® Nature Range Sustainable Prepregs
HexPly® Nature Range prepregs feature proven resins such as HexPly M49, M78 and M79 with bio-derived epoxy resin content. Created for use in all industrial markets, HexPly Nature Range materials can be seamlessly integrated into existing production processes, maintaining consistent mechanical performance and processing properties. A dedicated sustainability corner of the Hexcel stand will detail Nature Range products optimized for automotive, marine, wind energy and winter sport applications. The display will include an alpine ski produced by leading manufacturer Tecnica Group Ski Excellence Center which produces skis for Blizzard and for Nordica using HexPly Nature M78.1 UD flax prepreg material. In addition to the reduced environmental impact of the sustainably grown reinforcement, the flax fiber laminates also improve impact resistance and vibration damping in the ski.

HexPly® XF Surface Technology for Improved Part Surface Finish Quality
HexPly XF is a lightweight, semi-preg material that replaces traditional in-mold gel coat. It eliminates time-consuming refinishing work typically required to obtain a paint-ready surface and produces lighter, more consistent parts with shorter cycle times and a cleaner working environment. Visitors to the stand will see a composite panel illustrating a high-quality painted surface enabled with XF technology in a diverse range of industrial applications such as super yacht roof parts, Class A surface automotive panels, and both prepreg and infused wind turbine blades.

HexPly® M49 Prepreg for Automotive Visual Carbon Parts
HexPly M49 is easy to process and is especially suitable for visual carbon fiber-look applications such as the Brabus hood scoop on display on the Hexcel stand at JEC.

HexPly® Prepregs and HiMax® Reinforcements for Performance Marine Structures
Using a scale model of a Gunboat 68 performance sailing catamaran, Hexcel will illustrate how its HexPly and HiMax materials provide manufacturers with a complete set of lightweight composite solutions for high-performance marine structures. HexPly prepreg was selected for critical structural parts of the Gunboat 68 and provides very high mechanical performance including high dry and wet Tg.

Heavyweight HiMax reinforcements offer high deposition rates and remain easy to handle after cutting, making them highly suitable for industrial applications. In combination with a lightweight PrimeTex® woven fabric, the package of carbon fiber HiMax materials developed for the Gunboat 68 enabled consistent resin flow during infusion with reduced surface print-through.

Hexcel Fibers and Reinforcements for Lightweight Sporting Equipment
Sporting equipment manufacturers rely on Hexcel composite materials to deliver the ultimate performance at the lowest possible weight. Hexcel will exhibit a number of the latest high-performance sporting equipment applications such as a Bauer hockey stick featuring PrimeTex 98 gsm AS4C 3K fabric and a Corima tri-spoke cycling wheel made with lightweight Hexcel carbon fiber UD tape. Hexcel will also demonstrate how its HexTow® carbon fibers are used in key leisure and marine applications by displaying an AEROrazr solid carbon rigging component manufactured by spar and rigging manufacturer Future Fibres for the 36th America’s Cup.

 

Source:

Hexcel Corporation / 100% Marketing

Photo: JEC Group
26.04.2022

The Winners of the 2022 JEC Composites Innovation Awards

Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composites industry. The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

The ceremony took place on April 26th in Paris. Highlighted by the presence of jury members, finalists and winners but most importantly, as it was livestreamed, the gathering of many people all around the world to watch the awaited results.

The enthusiasm for the Innovation Awards, exactly 7 days prior to JEC World, is a good sign of the industry’s eagerness to get back together and ensure the future of composites innovation.

Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composites industry. The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

The ceremony took place on April 26th in Paris. Highlighted by the presence of jury members, finalists and winners but most importantly, as it was livestreamed, the gathering of many people all around the world to watch the awaited results.

The enthusiasm for the Innovation Awards, exactly 7 days prior to JEC World, is a good sign of the industry’s eagerness to get back together and ensure the future of composites innovation.

  • Aerospace Application
    Diab (Sweden): 100% thermoplastic panel for cabin interiors
  • Aerospace – Process
    MTorres Disenos Industriales S.A.U. (Spain): Innovative Infusion Airframe Manufacturing System
  • Automotive & road transportation – Structural
    Jaguar Land Rover Limited (UK): TUCANA
  • Automotive & road transportation – Surfaces
    AUDI AG (Germany): Seamless Integration of Flexible Solar Film in FRP
  • Building & Civil Engineering
    Windesheim (Netherlands): Structural Re-Use of Thermoset Composites
  • Design, Furniture and Home
    Kairos (France): Kairlin®, a new recyclable & compostable material
  • Equipment and Machinery
    Fibraworks GmbH (Germany): Winding the future – fibraforce technology
  • Maritime Transportation & Shipbuilding
    Voith Composites SE & Co. KG (Germany): Marine Rotor Blades made of Voith ‘Carbon4Stack’
  • Renewable Energy
    Siemens Gamesa Renewable Energy (Denmark): RecyclableBlade
  • Sports, Leisure & Recreation
    Bcomp Ltd. (Switzerland): Eco-joint from thermoset race and thermoplast road
Source:

JEC Group

(c) SHIMA SEIKI MFG., LTD.
25.04.2022

SHIMA SEIKI to Exhibit at JEC World 2022

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan will exhibit at the upcoming JEC World 2022 exposition to be held in Paris, France next month.

On display will be the P-CAM®131 multi-ply computerized cutting machine (NC cutting machine). SHIMA SEIKI's fast, efficient and reliable P-CAM® series computerized cutting machines are known for their innovative functions and Made-in-Japan quality, and boast the largest market share in Japan. At JEC World P-CAM®131 is shown in its most compact form, featuring a cutting area of 1,300 mm x 1,700 mm, with option for expansion. Its multi-ply cutting capability allows up to 1 inch (33mm) of fabric or material to be cut. A knife sharpening system produces a sharp, strong blade every time. Strong, robust components permit quicker response times for knife movement and more accurate cutting composites and other industrial materials. The P-CAM® lineup is ideally suited to global production in a wide range of industrial applications in addition to apparel and textiles.

Also available for video display will be SHIMA SEIKI’s latest innovation in flat knitting technology as applied to the field of technical textiles—a prototype weft knitting machine capable of multi-axial yarn insertion. Fabrics produced on this machine use inlay technique for the production of hybrid textiles that combine the stretch characteristics of knitted fabrics with the stability of woven textiles, suited to various technical applications. To this, warp yarn is inserted to further expand its capability to produce 3D-shaped carbon fiber and composite preforms directly on the machine. This is made possible because flat knitting as a textile production method is capable of producing end products that are shaped-toform and with added thickness. Therefore, savings in post-processing time, cost, material and labor as compared to current methods of preform production are immense, realizing efficient and sustainable production. SHIMA SEIKI’s own yarn unwinding technology is also used for optimum yarn feed and tension for use with technical yarns that are otherwise difficult to knit. Industrial textile samples knit on the multi-axial machine will also be available for examination on-site.

Source:

SHIMA SEIKI MFG., LTD.

Cobra
05.04.2022

COBRA to Sponsor and Manufacture JEC Trophies

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

Cobra International, leading manufacturer of advanced composite products for the water sports, automotive, marine, UAV, and industrial sectors, reinforces its long collaboration with the JEC Group by designing and manufacturing this year’s JEC Composites Innovation trophies. Cobra has designed and manufactured 35 composite material trophies for the JEC Composites Innovation and Start Up Booster competitions which will be presented during the 2022 awards ceremonies and throughout other JEC Group events in 2022.

The 2022 trophies are designed and produced by Cobra’s Design and Development department - the in house team that supports Cobra’s mass production operations with specialist expertise in product design, industrial design & prototyping. The sweeping curves of the trophies are influenced by perfume bottles, linking back to JEC’s French cultural heritage.  The design also combines a pallet of different materials to symbolise the JEC Group’s complete coverage of the composites sector. Acrylic, upcycled teak production waste from the furniture industry, Innegra™, flax, carbon, and aramid materials have been combined with Sicomin’s GreenPoxy 33 bio-resin to reference the award programme’s combined focus on innovation and sustainability.

The JEC Composites Innovation Awards are presented annually, recognising, and rewarding the most cutting-edge and ingenious projects that exploit the full potential of composite materials. Over the last 20 years, the JEC Composites Innovation and Startup programs have celebrated both innovation and partnership. The JEC Group will announce the winners for the 2022 JEC Composites Innovation awards on April 26th in Paris and in live streaming, and the Start-up Booster winners on May 3rd at JEC World.

“Cobra is delighted to reinforce its partnership with JEC Group, sponsoring and manufacturing the JEC trophies for 2022,” comments Danu Chotikapanich, CEO, Cobra.  “These are two of the most prestigious and respected awards programs within the composites industry and one that also matches Cobra’s ongoing commitment to innovation and sustainability improvements. Working with the latest bio resin technology, natural fibre reinforcements and upcycled composite and wood production waste materials our Design and Development team have created some stunning trophies for this year’s award season.”

Source:

COBRA International Co.,Ltd.

30.03.2022

EDANA released its statistics on Nonwovens Production and Deliveries for 2021

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres).

EDANA, the international Association serving the nonwovens and related industries today released its statistics on Nonwovens Production and Deliveries for 2021. Following the impressive growth recorded in 2020, the updated figures for Greater Europe (incl. Western and Eastern Europe countries, Turkey, Belarus, Russia and Ukraine) highlight again the ability of the European industry to innovate and to invest in order to meet the challenges of the pandemic crisis.

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres). Since 2019, the European output increased by nearly 9%.

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres).

EDANA, the international Association serving the nonwovens and related industries today released its statistics on Nonwovens Production and Deliveries for 2021. Following the impressive growth recorded in 2020, the updated figures for Greater Europe (incl. Western and Eastern Europe countries, Turkey, Belarus, Russia and Ukraine) highlight again the ability of the European industry to innovate and to invest in order to meet the challenges of the pandemic crisis.

In 2021, nonwovens production in Greater Europe increased in volume by 2.0% to reach 3,120,967 tonnes (and 87.6 billion square metres). Since 2019, the European output increased by nearly 9%.

Jacques Prigneaux, EDANA’s Market Analysis and Economic Affairs Director commented “This 2% average growth is in line with European forecasts disclosed in October 2021 in our Global Nonwoven Markets 2020-2025 report. In 2021, significant growth areas for nonwovens were recorded in building construction (+17.4%), agriculture (+11.3%), electronic materials (+10.1%) and air filtration (+9.1%). Countering this, a further decline of -1% was recorded in automotive interior applications. In some market segments, a comparison with the pre-COVID situation is probably more relevant. This is particularly true in hygiene, medical and wipes nonwovens, which were almost flat or slightly decreasing compared to the level reached in 2020, but still much higher than in 2019”.

He added: “Looking at the different production processes of nonwovens, various trends were observed in 2021. The production of fiber-based materials, including Drylaid, Wetlaid, and Airlaid technologies, recorded divergent growth rates (respectively +2.4%, +1.1% and -4.8%), and spunmelt nonwovens recorded a growth rate of +3.1%. In Drylaid, the highest growth in tonnes was observed in needlepunched, with a 6.4% increase. The production of drylaid-hydroentangled, which peaked in 2020, was at the same level a year later”.

More information:
Edana nonwovens
Source:

EDANA

30.03.2022

Carbios & Indorama Ventures: Manufacturing plant for fully bio-recycled PET

  • The plan for the reference plant is to be operational in 2025 in France (Longlaville) with a processing capacity of 50.000 tons of PET waste per year and creating 150 direct and indirect new jobs.
  • Indorama Ventures, the world’s largest producer of recycled PET for beverage bottles, plans to co-invest in this project3 and will consider expanding Carbios’ unique biological recycling process at other PET sites4 for future developments.
  • This strategic project is strongly supported by the French Government and the Grand-Est Region, with significant non-dilutive financing.

Carbios (Euronext Growth Paris: ALCRB), a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic and textile polymers and Indorama Ventures (Bloomberg ticker: IVL.TB), one of the world-leading PET manufacturer, jointly announced a collaboration to build a manufacturing plant operating Carbios’ PET bio-recycling technology at Indorama Ventures’ PET production site in France (Longlaville, Meurthe-et-Moselle).

  • The plan for the reference plant is to be operational in 2025 in France (Longlaville) with a processing capacity of 50.000 tons of PET waste per year and creating 150 direct and indirect new jobs.
  • Indorama Ventures, the world’s largest producer of recycled PET for beverage bottles, plans to co-invest in this project3 and will consider expanding Carbios’ unique biological recycling process at other PET sites4 for future developments.
  • This strategic project is strongly supported by the French Government and the Grand-Est Region, with significant non-dilutive financing.

Carbios (Euronext Growth Paris: ALCRB), a pioneer in the development of enzymatic solutions dedicated to the end-of-life of plastic and textile polymers and Indorama Ventures (Bloomberg ticker: IVL.TB), one of the world-leading PET manufacturer, jointly announced a collaboration to build a manufacturing plant operating Carbios’ PET bio-recycling technology at Indorama Ventures’ PET production site in France (Longlaville, Meurthe-et-Moselle).

After having successfully started-up its demonstration plant in Clermont-Ferrand, Carbios is moving one step further towards the industrialization and commercialization by partnering with Indorama Ventures. The goal is to build and operate in France the world’s first industrial-scale enzymatic PET bio-recycling plant, with a processing capacity estimated at ca. 50.000 tons of post-consumer PET waste per year, equivalent to 2 billion PET bottles or 2.5 billion PET trays.

The capital investment required for the project is expected to be around €150 million for Carbios core technology, including in particular an additional purification step, which has been integrated into the process. In addition, an estimated €50 million investment will be allocated for the infrastructure preparation of the site. The project is expected to create approximatively 150 direct and indirect full-time jobs. In the coming months, Carbios expects to finalize a strong non-dilutive financial support from French Government and from the Grand-Est Region5, based on the offer received last week by Carbios, from the Minister of Industry, Agnès Pannier-Runacher and the President of Grand-Est Region, Jean Rottner.

This financial support will be conditional on the notification to the European Commission and on contractualization by French authorities. Carbios announced in its half-year results on the 30th September 2021 a cash position of €112 million. Since then, Carbios has also secured a €30 million loan from EIB.

Source:

Carbios

ANDRITZ at JEC World 2022 (c) ANDRITZ AG
16.03.2022

ANDRITZ at JEC World 2022

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

International technology group ANDRITZ will be presenting its special-purpose machines for needlepunch production (including its portfolio for carbon applications) at JEC World 2022 in Paris, France, from May 3 to 5.

Experience and Know-How
ANDRITZ designs, develops, and engineers special-purpose machines for very specific and sensitive applications, like aerospace, railway, and military needs. Therefore, it can provide the market with customized machines offering perfect solutions, whether they are needed for prototypes or for industrial production.

Skilled Engineers
In increasingly demanding markets, the skilled ANDRITZ engineers and technicians help customers get the most out of their investments. The variety of cases they face every day enables them to optimize both output and quality depending on the fibers used, the challenge, and the customer’s final application.

Carbon Expertise
Experience with conductive fibers enables ANDRITZ to overcome challenges and provide access to new product developments. The company’s expertise lies in textile know-how as well as a deep understanding of related constraints. It includes carded/crosslapped processes for nonwovens made from recycled carbon fibers, which can be delivered in rolls or die-cut shapes.

Unconventional Needling for End-Uses
ANDRITZ addresses customers’ challenges by offering solutions and expertise in terms of straight and multi-axial needling, enabling the consolidation of fibers on flat or non-flat surfaces (such as rounded shapes) and even of layers up to 350 mm thick. New developments are made possible thanks to the outstanding ANDRITZ testing facility.

Support and Development
The ANDRITZ needlepunch technical center in Elbeuf, France, is open to visitors. Innovative strength and adaptability are the characteristics that make ANDRITZ the preferred partner in the search for genuine, efficient, and reliable solutions in the interests of productivity and premium, state-of-the-art consolidation. Secrecy being key in such sensitive development work, ANDRITZ naturally always guarantees the utmost confidentiality.

More information:
Andritz JEC World needlepunch
Source:

ANDRITZ AG

Good News from Maison&Objet Paris © M.Chat
© M.Chat, Leblon Delienne will be there at Maison&Objet Paris : Hall 7 — Stand D6
08.03.2022

Good News from Maison&Objet Paris

  • The vaccine pass will no longer be required for your fair
  • March 24 – 28, ­­­­­2022   Paris ­­­­­­­

The French government has announced the suspension of the vaccine pass starting on March 14, in addition to the end of the mask requirement indoors (except for on public transport).Only one requirement remains...as always, you must have your badge with you to enter the fair.

So don’t wait: get ready for your visit to the fair, and prepare to rediscover the joy of spotting the season’s future must-have products.

  • The vaccine pass will no longer be required for your fair
  • March 24 – 28, ­­­­­2022   Paris ­­­­­­­

The French government has announced the suspension of the vaccine pass starting on March 14, in addition to the end of the mask requirement indoors (except for on public transport).Only one requirement remains...as always, you must have your badge with you to enter the fair.

So don’t wait: get ready for your visit to the fair, and prepare to rediscover the joy of spotting the season’s future must-have products.

Source:

SAFI - SALONS FRANCAIS ET INTERNATIONAUX

(c) Groz-Beckert KG
04.03.2022

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA Miami

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA in Miami, USA, from 28 to 31 March 2022. Groz-Beckert experts will be presenting the latest products and solutions for the production of nonwovens.

Whether hydroentanglement, traditional needling or service: The product group Felting gives visitors comprehensive insights into the portfolio for the nonwovens industry. For spunlace customers, Groz-Beckert presents its HyTec® P jet strips, with a high hardness excellent scratch resistance.

In the area of traditional needling, the patented GEBECON® felting needle is one of Groz-Beckert’s highlight products. Thanks to its geometry, it offers optimized bending resistance with high flexibility.

Visitors can take a virtual tour through the technology facility in the Groz-Beckert Technology and Development Center (TEZ) in Albstadt, Germany and experience the staple fiber needle punch line (SVL).

Groz-Beckert will be exhibiting its Felting and Carding product areas at IDEA in Miami, USA, from 28 to 31 March 2022. Groz-Beckert experts will be presenting the latest products and solutions for the production of nonwovens.

Whether hydroentanglement, traditional needling or service: The product group Felting gives visitors comprehensive insights into the portfolio for the nonwovens industry. For spunlace customers, Groz-Beckert presents its HyTec® P jet strips, with a high hardness excellent scratch resistance.

In the area of traditional needling, the patented GEBECON® felting needle is one of Groz-Beckert’s highlight products. Thanks to its geometry, it offers optimized bending resistance with high flexibility.

Visitors can take a virtual tour through the technology facility in the Groz-Beckert Technology and Development Center (TEZ) in Albstadt, Germany and experience the staple fiber needle punch line (SVL).

At IDEA, the Groz-Beckert InLine card clothing series is the main focus of the product group Carding. Thanks to a new and patented production method, Groz-Beckert has developed a new range of metallic card clothing, which offers improved process reliability and increased up-time of the card for the nonwovens industry. At the same time, the new production method also reflects the corporate principles of environmentally-friendly and resource-saving production.

The card clothings are characterized by a controlled and very precise hardening of the teeth, a reduced rib height of 1.3 millimeters and  completely scale-free surfaces without burrs. An exhibit at the booth will highlight how this differs from conventional production methods. It shows an impressive comparison between the new Groz-Beckert InLine card clothing and the previous generation.

The SiroLock™ plus worker and doffer wire was developed as the first special geometry of the Groz-Beckert InLine card clothing series. In addition to the advantages of the Groz-Beckert InLine card clothings, the SiroLock™ plus impresses with a more effective fiber take-up, control and transfer. The functionality and operating principle behind the SiroLock™ plus can be experienced by IDEA visitors via Augmented Reality.

Source:

Groz-Beckert KG

21.02.2022

JEC COMPOSITES STARTUP BOOSTER 2022

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

  • A springboard for entrepreneurs in the composites industry

In a few years, JEC Composites Startup Booster has became a reference for entrepreneurship in the composites industry worldwide. Each year before JEC World, among the startups that submitted their application, 20 of them are selected. 20 finalists from all over the world who will join the leading composites trade show to pitch their project on stage before a panel of expert judges.

This competition is a unique opportunity to network and shine a light on what will be the future of the composites industry so save the date: the two pitches sessions will happen on May 3rd, and the winners will be named on May, 4th at 2.45 pm at JEC World 2022 in Paris as well as online on JEC World Connect platform. This year’s competition is sponsored by Airbus & Mercedes-Benz (Main Innovation Partners) as well as Magna Exteriors (Innovation Partner).

Launched in 2017, Startup Booster has been organized in three different regions (Europe, USA and Asia) and has already fostered the emergence of 500+ innovative projects from 50+ countries, 80 finalists and 30 winners, including Arevo, Continuous Composites, ComPair, Fortify and Vartega…
This challenge not only represents an opportunity to the winners of the trophy but to all the parts involved: participants, jury, official partners and the worldwide audience of JEC World. It brings the entire composites value chain together, creating future business opportunities.

The 20 finalists are divided into two categories:
• Process, Manufacturing & Equipment
• Materials & Products

The jury includes representatives from major manufacturers and investors:
Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite, Airbus
Karl-Heinz FULLER, Head of Future Outside & Materials Mercedes-Benz AG
Florent ILLAT, Head of Safran Corporate Ventures, Safran
Brian KRULL, Global Director of Innovation, Magna Exteriors
Tim VORAGE, Founder and Manager Growth Garage Accelerator , Mitsubishi Chemicals Advanced Materials

Two pitch sessions of 10 presentations each will be held in the Agora stage (Hall 5), on Tuesday, May 3, from 10am to 11.25am (Category: Products & Materials) and from 4.30pm to 5.55pm (Category: Process, Manufacturing & Equipment). Three winners will be chosen by the jury and one winner for the sustainable aspects of the project. The awards ceremony will be held on Wednesday, May, 4th at 2.45 pm.

Category “Products & Materials”
o Blackleaf (France)
o Dongnam Realize (South Korea)
o FibreCoat (Germany)
o FVMat (Israel)
o Ora Graphene Audio (Canada)
o Pangolin Defense (France)
o Phononic Vibes (Italy)
o Revolve (Germany)
o Smart Resilin (Israel)
o Space Walker (Japan)

Category “Process, Manufacturing & Equipment”
o Antefil Composite Tech (Switzerland)
o ANYBRID (Germany)
o Atomic-6 (USA)
o Carbon-Drive (Germany)
o Continuum (Denmark)
o Fibraworks (Germany)
o Herone (Germany)
o RVmagnetics (Slovakia)
o Touch Sensity (France)
o XARION Laser Acoustics (Austria)

More information:
JEC Group Startup
Source:

JEC Group

Soul Comfort by RIRI (c) Riri Group
09.02.2022

Riri Group presents its new collection SS 2023 at Première Vision Paris

For over 80 years Riri Group has established itself as a leading point of reference for the creation of details of style providing high-end fashion brands with top quality accessories – which now include zippers, buttons, metal components and fashion jewels.

All things style and sustainability: This year Première Vision Paris (08 – 10 February) will be once more the stage to show off the results. The new Spring/Summer 2023 line is inspired by three distinct eras and paths, but at the same time it conveys a total synergy and integration between the various divisions of the Group, coordinated and harmonised as well as united by their common interest in nature and sustainability.

For over 80 years Riri Group has established itself as a leading point of reference for the creation of details of style providing high-end fashion brands with top quality accessories – which now include zippers, buttons, metal components and fashion jewels.

All things style and sustainability: This year Première Vision Paris (08 – 10 February) will be once more the stage to show off the results. The new Spring/Summer 2023 line is inspired by three distinct eras and paths, but at the same time it conveys a total synergy and integration between the various divisions of the Group, coordinated and harmonised as well as united by their common interest in nature and sustainability.

SOUL COMFORT
Off-the-grid essentials between relaxation and style
Sparked from the contemporary need to balance happiness and security, while enriched by an aesthetic and provocative approach, this line embodies all the value and potential of a sustainabilityoriented communication for each and every product, as pieces feature the relevant information on the zip tape and on the button application support. This line presents softer colours that encompass a wide range of styles, including floral, summer satin and semi-transparency, accompanied by innovative yarns and sustainable materials, such as hemp, linen, silk, certified organic cotton, recycled nylon and bio-based polyester. The line also features stainless steel products, including mono-material buttons and zipper chains or the use of aluminium chains that stand out for their particular lightness.

OUTDOOR EXPRESSION
To always stand out
Inspired by nature and outdoor activities, in this section the focus is on attire codes that become the means through which everyone can express and enhance their look in every context, even when immersed in the surrounding environment. Coloured stripes and rubberized soft touch materials are the two essential concepts, combined with bright and flashy colours. The Storm Evo zip, reversed coated nylon zips (among which the one with the reflector catches the eye), and the recycled nylon buttons are back.

WISE EXCLUSIVITY
Smart and sustainable luxury
Each creation in this line is studied down to the smallest detail, to achieve luxury products that increase their value over time thanks to their sustainable process and long life cycle, achieved through multiple possibilities for use in different ways and areas. We find here the use of diamond, recreated in the laboratory with more sustainable techniques, but also zips with elegant and refined lines, the use of stainless steel and PVD and finally, the use of precious galvanic finishes on buttons, but also on chains and pullers. This path shows the important role collaboration plays between the divisions of the Riri Group, making it possible to create something unique and valuable.

Source:

Menabò Group srl

07.02.2022

Bemberg™ by Asahi Kasei is back at Première Vision

Bemberg™ is back at Première Vision to celebrate its 90th anniversary through its latest collections, premium partnerships with contemporary brands such as ECOALF and a brand new visual identity. The industry-leading textile fair will represent another pivotal occasion for Bemberg™ to showcase its latest claim “Crafted Elegance”, which perfectly embodies its values of preciousness, quality and refined aesthetic blended with innovation and responsible values.

Born in 2009, both the name and concept of ECOALF came after the birth of Javier Goyenche’s - founder and president - two sons: Alfredo and Alvaro. He wanted to create a truly sustainable fashion brand and believed the most sustainable action to take was to stop using natural resources in a careless way to ensure them to the next generation. Since then, Ecoalf’s mission has been to make a new generation of recycled products with the same quality and design as the best non-recycled.

Based on this design idea, the Mery dress and Patrica pants are part of Ecoalf’s FW21 collection and both made with 100% Bemberg ™ Cupro by Asahi Kasei.

Bemberg™ is back at Première Vision to celebrate its 90th anniversary through its latest collections, premium partnerships with contemporary brands such as ECOALF and a brand new visual identity. The industry-leading textile fair will represent another pivotal occasion for Bemberg™ to showcase its latest claim “Crafted Elegance”, which perfectly embodies its values of preciousness, quality and refined aesthetic blended with innovation and responsible values.

Born in 2009, both the name and concept of ECOALF came after the birth of Javier Goyenche’s - founder and president - two sons: Alfredo and Alvaro. He wanted to create a truly sustainable fashion brand and believed the most sustainable action to take was to stop using natural resources in a careless way to ensure them to the next generation. Since then, Ecoalf’s mission has been to make a new generation of recycled products with the same quality and design as the best non-recycled.

Based on this design idea, the Mery dress and Patrica pants are part of Ecoalf’s FW21 collection and both made with 100% Bemberg ™ Cupro by Asahi Kasei.

The Parisian exhibition completes the company’s celebrative two-chapter journey. The first half was presented during Pitti Uomo, where Bemberg™ showed archival suits crafted by the historic Sartoria Litrico and lined in Cupro. Behind them stood the new visual image of Bemberg™, focused on exceptional beauty, one-of-a-kind uniqueness and joyful comfort.

Source:

Bemberg™ by Asahi Kasei / C.L.A.S.S.

26.01.2022

World Pultrusion Conference - Postponed

  • The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

  • The 16th World Pultrusion Conference will be postponed to 5-6 May 2022

The EPTA – European Pultrusion Technology Association in cooperation with the American Composites Manufacturers Association (ACMA) will postpone the 16th World Pultrusion Conference to 5-6 May 2022 due to the corona situation and the postponement of the JEC World, with which there is a close partnership.

This conference takes place every two years and is the meeting point of the European and worldwide Pultrusion Industry. More than 25 international speakers from Belgium, Germany, France, Spain, The Netherlands, Turkey, UK and the USA will present practical presentations about innovative applications, technologies and processes. Equally current market trends and developments are on the agenda.
This World Pultrusion Conference takes now place on 5-6 May 2022 in Paris, France. The presentation language will be English. The program, further details and registration information is available at www.pultruders.com.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) Sitip
21.01.2022

Sitip presents COSMOPOLITAN Fashion-tech fabrics at Milano Unica

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

Sistema Moda Italia confirms its Innovation Area for the 34th edition of Milano Unica, an area which responds to the growing demand for innovation in products, processes and services able to give specific performances or made with innovative and sustainable systems. And right here we find Sitip’s technical fabrics for clothing, with the COSMOPOLITAN Fashion-tech fabrics collection, modern and comfortable, dedicated to contemporary urbanwear/sportswear style and which perfectly meets the new needs required by the market and by the final consumer: performance and design.

COSMOPOLITAN Fashion-tech is declined into urbanwear through the sartorial technical fabrics that the company has defined Techno Sartorial: a tailoring that combines flawless cuts with exceptional fabric performance.

For the production of contemporary urbanwear, thought for the city, Sitip showcases the man’s suit made of jacket+trousers in warp-knit Cosmopolitan Citylife fabric: bi-stretch nylon with UV protection (UPF 50+), quick drying, easy care and skin comfort. Highly performing, breathable, comfortable, insulating and with an exceptional fit: incredible elegance and comfort that enhance the contemporary urbanwear style.

For women, Sitip presents COSMOPOLITAN Fashiontech fabrics dedicated to athleisure, with leggings made - for the summer version - in Cosmopolitan London, a bi-stretch circular knitted fabric, no seethrough, breathable, comfortable on the skin with UV protection (UPF 50+), with easy care and perfect shape retention, and - for the winter version - in Cosmopolitan Paris GZ, a circular knitted fabric raised on the reverse side, with the same properties as the previous one and thermoregulation characteristics.

The Instinct fabric is available in the recycled and raised version NATIVE INSTINCT GZ: a GRS certified thermal fabric made with pre-consumer recycled yarns, bi-stretch, breathable, resistant to pilling, easy care and high comfort, ideal for sporty knitwear and urbanwear part of the NATIVE SUSTAINABLE TEXTILES family, the Sitip fabric collection produced with GRS certified recycled yarns and low environmental impact chemicals with a lower consumption of natural resources , able to respect the environmental and social criteria extended to all the stages of the production chain, including the traceability of raw materials. Sitip also operates in line with international certifications such as OEKO-TEX®, BLUESIGN®, GRS and adheres to the ZDHC gateway, adding to these an ISO 14001 environmental management system, which certifies the company’s commitment to reducing pollution risks.

Source:

Sitip / Valeria Rastrelli

19.01.2022

Zünd at JEC World 2022

  • Smart Workflows for Digital Cutting & Kitting

At JEC World 2022 in Paris, Zünd presents the latest developments in modular cutting solutions for composites. Known for its expertise in digital cutting and workflow integration.
As specialist in digital cutting for composites applications, Zünd demonstrates how data management, digital cutting, and downstream processes such as picking, sorting, and kitting, can be automated intelligently and based on specific needs.

In Industry 4.0 in general and processing composites in particular, an unencumbered flow of data is key to workflow efficiency. With Zünd PreCut Center, the user is well equipped to handle the challenges of demanding manufacturing processes. The software automatically optimizes contours and adjusts cut paths depending on the material and choice of tools. With the integrated nesting function, parts are laid out automatically for optimal material utilization. Considering the high cost of materials, maximum yield is essential for economical digital cutting.

  • Smart Workflows for Digital Cutting & Kitting

At JEC World 2022 in Paris, Zünd presents the latest developments in modular cutting solutions for composites. Known for its expertise in digital cutting and workflow integration.
As specialist in digital cutting for composites applications, Zünd demonstrates how data management, digital cutting, and downstream processes such as picking, sorting, and kitting, can be automated intelligently and based on specific needs.

In Industry 4.0 in general and processing composites in particular, an unencumbered flow of data is key to workflow efficiency. With Zünd PreCut Center, the user is well equipped to handle the challenges of demanding manufacturing processes. The software automatically optimizes contours and adjusts cut paths depending on the material and choice of tools. With the integrated nesting function, parts are laid out automatically for optimal material utilization. Considering the high cost of materials, maximum yield is essential for economical digital cutting.

With Pick&Place, Zünd presents a cost-effective solution for fully automated picking and kitting of cut parts. The Pick&Place interface enables direct communication with the robot via Zünd Cut Center – ZCC, the Zünd operating software and user interface. Pick&Place makes it possible to completely automate parts removal, kitting and placing. The necessary parameters are derived from the metadata supplied with the job order.

Source:

Zünd Systemtechnik AG

Smoking jacket worn by John F. Kennedy in 1963 Photo: Sartoria Litrico
Smoking jacket worn by John F. Kennedy in 1963
04.01.2022

Bemberg™ celebrates 90 years of fashion & heritage @ Pitti Uomo

At Pitti Uomo, Bemberg™ by Asahi Kasei celebrates the new year exploring the company’s 90 years anniversary and journey. In Florence, Bemberg™ past and present are linked by style: on display are key historic garments worn by icons such as J.F. Kennedy belonging to historic Roman Sartoria Litrico together with Bemberg ™ new visionary claim “Crafted Elegance“.

At Pitti Uomo, Bemberg™ by Asahi Kasei celebrates the new year exploring the company’s 90 years anniversary and journey. In Florence, Bemberg™ past and present are linked by style: on display are key historic garments worn by icons such as J.F. Kennedy belonging to historic Roman Sartoria Litrico together with Bemberg ™ new visionary claim “Crafted Elegance“.

On January 11th, Bemberg™ will be at Pitti Uomo 101 featuring an exclusive collaboration with Luca Litrico, head of the Roman historic Sartoria Litrico, founded by his uncle Angelo Litrico in 1951. He became famous for crafting the highest-quality suits for all the most important men of Dolce Vita era, from Richard Burton to Marcello Mastroianni. Its historic relevance has even been recognized by the Ministry of Cultural Heritage, thanks to its archive composed of hundreds of photos and sketches signed by Angelo Litrico himself. For this occasion, Bemberg™ will showcase four historic suits wore by true style arbiters a such as: former US president John F. Kennedy, dolce vita poster-boy Rossano Brazzi, American astronaut James B. Irwin and iconic fashion designer Angelo Litrico. All garments feature stylish linings woven with Bemberg™ fiber disclosing its ductility always in vogue through time. Over the decades, Bemberg™ established heritage in formal lining has expanded into new territories and able to represent also contemporary outerwear styles.
 
“We are so excited to be back in Florence. Pitti Uomo and Italy are the perfect starting point of our journey through style.” says Mr. Koji Hamada, CEO of Asahikasei Fibers Italia, “At our booth visitors can glimpse the link between past and present, our values and chromosomes for the fashion to come.”

Bemberg™ vision is centred around contemporary beauty, and uniqueness – the fibre manufacturing is exclusively taking place in Nobeoka, where its closed-loop circular economy production approach together its transparent and traceable processes are able to guarantee the responsible certified values.
 
Bemberg™ by Asahi Kasei will unveil the second chapter of its journey at Première Vision in Paris with an exhibition where visitors will be able to explore the fashion world, from India to Japan, through fabrics and style of today and tomorrow.

More information:
Bemberg™
Source:

GB Network

(c) ISKO
22.12.2021

ISKO’s at lablaco’s virtual-reality (VR) Circular Fashion Summit 2021

As part of its mission to a fully circular fashion industry, ISKO has joined forces with the CFS by lablaco to show its commitment to this important cause. At Grand Palais Éphémère in Paris on 9-12 December, ISKO engaged with industry leaders from across the world to demonstrate its approach to circularity.
 
At its virtual gallery, ISKO guided its guests through its Metaverse and discussed its goal to eliminate virgin fibres in its fabrics and how it plans to achieve it.
 
Guests were able to dress their avatars in their very own ISKO VR denim jacket and ISKO worked with the Institute of Digital Fashion (IoDF) to design this VR art installation, which represents how it is pushing the boundaries of what is possible, making fabrics from textile waste.

As part of its mission to a fully circular fashion industry, ISKO has joined forces with the CFS by lablaco to show its commitment to this important cause. At Grand Palais Éphémère in Paris on 9-12 December, ISKO engaged with industry leaders from across the world to demonstrate its approach to circularity.
 
At its virtual gallery, ISKO guided its guests through its Metaverse and discussed its goal to eliminate virgin fibres in its fabrics and how it plans to achieve it.
 
Guests were able to dress their avatars in their very own ISKO VR denim jacket and ISKO worked with the Institute of Digital Fashion (IoDF) to design this VR art installation, which represents how it is pushing the boundaries of what is possible, making fabrics from textile waste.

More information:
Isko textile waste circularity
Source:

ISKO / Menabò Group

JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking © 2021 JEC Group
JEC World 2022
08.12.2021

JEC World 2022: 3 months to go

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

“We are looking forward to welcoming our exhibitors, partners and visitors back to Paris to resume business and promote innovation,” comments Thomas Lepretre, VP Events, Sales and Operations of JEC Group. “JEC World will bring the composites industry together to showcase the sustainability benefits of composite materials to a global audience, and to provide a stimulating meeting-place for the industry to pursue its sustainability ambitions by exchanging knowledge, forging collaborations, and imagining new concepts to protect our environment.”

  • JEC World a unique get-together on sustainability throughout the product lifecycle
  • JEC World a real composites “think tank”
  • JEC World 2022 will demonstrate how sustainable thinking is at the heart of the innovative designs, technologies and business models driving the development of the next generation of composites applications.

Four conferences will be held over the three days, focusing on:

• Sustainability of Raw Materials for Composites: Fueling the Circular Revolution
• Rethinking Composite Materials Production: The Path to Sustainable Manufacturing
• Design for Circular Composite Products: Turning Waste, Recycling & Reuse into Opportunities
• Applications of Composite Materials for Circularity: Towards a Net-Zero World

Innovation is in JEC World’s DNA
One of JEC World’s objective’s is to promote the composites sector’s most innovative projects. More than 600 product launches are expected to be announced over the three days of the show, which will also feature JEC’s high-regarded innovation challenges and awards ceremonies :

• The JEC Composites Innovation Awards celebrate innovative global composite projects, as well as fruitful collaborations between different players in the value chain. Over more than 15 years, the JEC Composites Innovation Awards have highlighted collaborations between some 1,900 companies and recognized 203 creative projects. The winners will be announced on March 7th during a dedicated ceremony and their successful technologies will be on display throughout the show.

• The JEC Composites Startup Booster is the leading startup competition in the world of composites. In 2022, this competition will celebrate its fifth anniversary, with a special event to be organized onsite and the launch of a new “sustainability” award. And, with 20 finalists for 2022, it will recognize innovations with the greatest potential market impact and promote them to an influential audience of decision-makers. The finalists’ innovations will be displayed at JEC World’s “Startup Village.”

• For the first time, JEC World will host the 3rd edition of the SMC BMC Design Award organized by the European Alliance for SMC BMC. This international competition recognizes and promotes design excellence in the use of SMC and BMC materials. The theme of this edition is Sustainable Living, and the award is opento design students and young design professionals (less than 3 years of experience) living in Europe.

Source:

JEC Group