From the Sector

The Swiss Technology Award announced the 2020 prizes, and among all the notable finalist innovations of the year, HeiQ was bestowed the highest honor as First Prize Winner for its breakthrough antiviral textile technology HeiQ Viroblock.

Developed in record time and launched after the Swiss authorities announced the lockdown in March 2020, HeiQ Viroblock has had a major impact on the global textile industry and is being unprecedently adopted by mills around the world.

The technology that makes HeiQ Viroblock a unique innovation
What exemplifies HeiQ Viroblock is its ability to turn any fabric antiviral. It’s among the first textile technologies in the world to be proven effective against SARS-CoV-2 (COVID-19). HeiQ Viroblock consists of a combination of HeiQ’s patent-pending vesicle and silver technologies. The two mechanisms of attack result in an over 99.9% destruction of viruses in 5 minutes that is unrivaled in the industry. HeiQ Viroblock is a unique patent-pending formulation of 72% bio-based ingredients, made with 100% cosmetic-grade materials from the International Nomenclature of Cosmetic Ingredients list. HeiQ Viroblock is also a shining example of Swiss cooperation between academics and the industry. The silver technology was developed at ETHZ (Eidgenössische Technische Hochschule Zürich), the vesicle technology at EPFL (École polytechnique fédérale de Lausanne), and the production was scaled up at FHNW (Fachhochschule Nordwestschweiz).

HeiQ Viroblock has demonstrated unparalleled speed from laboratory to consumer
HeiQ launched the new antiviral textile technology HeiQ Viroblock on March 16, 2020 – two hours after Switzerland declared a state of emergency. This was made possible with the indispensable support of Swiss research Partner FHNW and the EPFL which helped accelerate product validation. The fast scale-up of production was enabled by the FHNW School of Life Sciences with their new Process Technology Center (PTC) by special permit. With its agile operations and global footprint, HeiQ also brought HeiQ Viroblock face masks and other PPE (personal protection equipment) to different corners of the world where are needed. Now, Swiss consumers can also acquire HeiQ Viroblock enhanced face masks online.

Reacting to the news of HeiQ Viroblock winning this year’s Swiss Tech Award, Co-founder and CEO Carlo Centonze says: “I am both amazed and honored that HeiQ has won this award a second time in just ten years, and from among some incredible tech innovation finalists. It confirms our resolve to push the boundaries and push innovations to help the world with its most pressing and imminent problems. This award is recognition for our company and team that have spared no efforts to develop and launch HeiQ Viroblock at such speed and make a valuable contribution to the global pandemic efforts. We remain true to our mission: enhancing the everyday lives of people with smart and efficient textile effects.”

In a roundtable discussion during the recent Innovate Textiles & Apparel (ITA) textile machinery exhibition, imogo Founding Partner Per Stenflo and representatives from a number of like-minded European companies discussed the opportunities for new spray application technologies for the dyeing and finishing sector.

These technologies can achieve tremendous savings for manufacturers compared to traditional water-intensive processes it was explained at the event, held online from October 15-30th.

Pioneer
imogo – one of the latest companies to join TMAS, the Swedish Textile Machinery Association – is one of the key pioneers in this area with its Dye-Max system. Dye-Max spray dyeing technology can slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. This is due to the extremely low liquor ratio of 0.3-0.8 litres per kilo of fabric and at the same time, considerably fewer auxiliary chemicals are required to start with.

Obstacles
Such technologies, however, face a number of obstacles to adoption and during the ITA discussion it was agreed that 2020 has not provided the ideal climate for adventurous investors. “The textile industry is quite conservative and is definitely in survival mode at the moment and it is not the time to be a visionary,” said Stenflo. “Day to day business is about staying alive – that’s the reality for many of our customers.” Nevertheless, all of the panellists agreed that sustainable production will remain top of the agenda for the textile industry in the longer term and spray technologies for dyeing and finishing processes will be a part of it.

“Any investment in something new is a risk of course, and we have to be able to explain and convince manufacturers that there’s a good return on investment, not only in respect of sustainability, but in terms of making good business sense,” said Stenflo. “Here we could use the help of the brands of course, in putting pressure on their suppliers to be more sustainable. Governments also have a role to play, in providing incentives for producers to move in the sustainable direction. Sustainability alone will never cut it, there has to be a business case, or it won’t happen.”

Marketing
The marketing of sustainable new fibers is comparatively easy for the brands compared to explaining the difficult textile processes and the chemistries involved in fabric and garment production, he added.

“These fibers, however, currently go through all the same dirty processes that we need to get away from, so it must happen,” he said. “In developing our technologies, it has been important for us to avoid disrupting existing supply chains, stick with using off-the-shelf chemistries and dyes, and involve the dye manufacturers who are an essential part in how operations are driven today. “In fact, collaboration across the entire textile supply chain – from the brands right back to the new technology developers – is essential in moving the sustainability agenda forward.

Business models
“We are also looking into new business models in terms of how to reduce or lower the thresholds for investment and minimise the risk for the manufacturers who are looking to be the innovators,” he concluded. Also taking part in the ITA roundtable discussion were Simon Kew (Alchemie Technology, UK), Christian Schumacher (StepChange Innovations, Germany) Tobias Schurr (Weko, Germany), Rainer Tüxen (RotaSpray, Germany) and Felmke Zijilstra (DyeCoo, Netherlands).

European innovations
“It’s fantastic that all of this innovation is taking place in Europe based on established know-how and forward thinking,” said TMAS Secretary General Therese Premler-Andersson.

“Spray application technologies are a perfect illustration of how new digital technologies can lead to more sustainable production, in this case by replacing water-intensive processes with the highly precise and controlled application of dyes and chemistries as vapour.
“There was a major project by the Swedish research organisation Mistra Future Fashion recently, involving many brand and academic institute partners. The project’s Fiber Bible 1 and 2 reports conclude that it’s very difficult to make assumptions that one fiber is better than another, because it’s so much about how fabrics and garments are being produced from them. The study also found that 55% of the chemicals used in a garment comes from the dyeing. This is where a number of TMAS companies can make a difference.
“An organic or recycled cotton t-shirt is not automatically more sustainable than a conventional cotton t-shirt, or even one made from synthetics – the alternative fibers are a good start but you have to consider the entire life cycle of a garment, and that includes the smart technologies in textiles production.
“TMAS members – backed by Swedish brands and advanced research institutes – are playing an active part in pushing forward new concepts that will work, and I have no doubt that digitalisation now goes hand in hand with sustainability for the textile industry’s future.”          

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

"Reconnecting innovation in the textile & apparel value chain" is the motto of WTIN's virtual trade show. And Oerlikon intends to more than live up to this motto. With more than 50 active experts from sales, customer service and technology as well as partners from its international network of representatives, the Manmade Fibers segment of the Swiss Oerlikon Group will try to be represented around the clock. "It is an interesting experiment for all of us and we would like to see it succeed," explains André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. "Our aim is to meet our existing customers again, make new contacts and see 'old friends' from the industry. We have prepared an attractive digital offer for them all. Those of you who missed our roller coaster ride in Barcelona last year can now enjoy the journey through time in peace and quiet from your home office on your digital tour of the fair. And, there are no more waiting times either," promises Wissenberg.

Factory know-how from a single source
From Melt to Yarn, Fibers and Nonwovens. From the polycondensation and the processing of PTA and MEG as well as the extrusion of, for example, recycled polyester chips all the way through to hundreds of thousands of packaged and stored or directly-delivered textured bobbins for a market within the textile industry worth billions. From the planning and construction of highly complex production plants to the engineering of large-scale plant projects and competent customer services. This business model runs like a red thread through the self-conception of the Manmade Fibers segment of the Swiss Oerlikon Group. The right partner, especially – but not exclusively – for newcomers to the textile industry. "With us they get everything they need for a successful business: Factory know-how from a single source. And that's what we would like to show our visitors at our virtual trade fair booth," says Wissenberg.

• Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

• Kettelhack GmbH – a German leader in the dyeing and finishing of monochrome fabrics for high-quality and durable workwear and bed linen – has this year retired its existing Monforts sanforizing line after 35 years of daily service, replacing it with a new one.

The first line was installed in 1985 during a decisive time for the company.

Taking the helm in the early 1980s, Jan Kettelhack – the current CEO, owner and great grandson of Heinrich Kettelhack who founded the company back in 1874 – made a number of decisions that have secured its success over the following decades.

In 1982 Kettelhack had to vacate its existing plant in the city of Rheine due to urban development restrictions and despite a general sense of crisis in the European textile industry at that time, opted to relocate and build a new highly automated plant that was not reliant on mechanical and personnel-intensive processes. This was aligned with a greater focus on competitive international sales.

From 1986, the company’s proficiency as a specialist in solid-colour textiles led to workwear textiles becoming a bedrock of the business. Continuous investments in machinery and technical equipment have resulted in a fully integrated and rationalised single source site dedicated solely to what the company does best – the expert dyeing and finishing of textiles.

Crucial process steps

These stages in the textile value-added chain, Jan Kettelhack has observed, are crucial to the quality of a final product in workwear – whether it stands the test in everyday use, how comfortable it is, and how many washes it can withstand.

Central to this is the sanforizing process, which pre-shrinks a fabric by compressing it prior to washing. This limits any residual or further shrinkage in a made-up finished garment to less than 1%, to ensure perfect comfort and fit over an extended lifetime.

“We certainly can’t complain about the performance of the old Monfortex sanforizing line which gave us so many uninterrupted years of service, but certain spare parts for it were becoming increasingly hard to source, the control unit was becoming a little unstable and we couldn’t risk potential interruptions to our production schedule,” says Kettelhack plant manager Hendrik Pleimann. “In many ways, the new Monfortex sanforizer is much the same as the old one in terms of its mechanical reliability and robust construction, but of course today’s drives are much more efficient, and when it comes to the automation features and control units – and the data we can generate and analyse for increasing efficiency – that’s a whole new world.”

Qualitex 800

The two-metres-wide Monfortex line benefits from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure.

The integrated Compactomat system allows a continuous indication and control of the shrinkage values and the temperatures of the shrinking cylinder and felt calender. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

Full line management can be optimised via the batch-specific calculation of all process material consumption and water and electricity use, with any standstill times analysed and immediately corrected for the future.

Any further assistance required is available via Monforts Teleservice, with direct connection to technicians and virtual access to machine analysis.

Professional

Commissioning of the new Monfortex line at Kettelhack commenced in January and it was fully operational in a relatively short time.

“This was a very professional installation provided by the Monforts team with whom we have a very good relationship dating back many years, and everyone knew what was required from both sides,” says Mr Pleimann. “Our operators have found the new line very user friendly and we are very pleased with how everything proceeded so smoothly. An unexpected benefit is that the new line is also a lot quieter, of course, which is something our operatives are appreciating.”

Key features of the Monfortex line are the proven fabric preparation, weft straightening and spreading units, prior to the compressive shrinkage machine with a 750mm shrinking cylinder, and a felt calender equipped with 2,000mm diameter drying cylinder. The line also features an integrated automatic grinding unit.

Customer service

Kettelhack is processing primarily cotton and polyester woven fabrics, with lyocell becoming increasingly popular in workwear for its softness and comfort.

As part of its customer service, the company stocks more than a million metres of grey fabric and at least 1.2 million metres of finished and rolled standard fabric in its warehouse at any one time, with a further 750,000 metres permanently in production.

While a significant cost, this commitment ensures Kettelhack customers can be fully flexible and rely on it as a partner.

“As a family-run company with around a hundred employees, Kettelhack operates very differently to bigger businesses which have to constantly consider their immediate quarterly profits,” Mr Pleimann concludes. “The thinking at Kettelhack is in terms of the next twenty years and ensuring that the business will be just as successful for the next generation as it is today. We also have a very flat organisational structure in which everyone is involved and takes an active part, which makes it a very nice place to work.”

Rester Oy, which is developing the plant in Paimio, recycles companies' end-of-life textiles, and Lounais-Suomen Jätehuolto Oy (LSJH), which will hire a production area at the same facility, processes households' end-of-life textiles. The plant will process 12,000 tonnes of end-of-life textiles every year, which represents about 10% of Finland’s textile waste.

The textile industry’s end-of-life textile problem is intolerable. Natural resources are increasingly used to manufacture products, but these materials are lost at the end of their life cycle. About 100 million kilograms of textile waste are generated annually in Finland alone. Reusing this material could reduce the textile industry’s carbon footprint and significantly reduce the use of natural resources.

Rester Oy and LSJH will drive the textile sector towards a circular economy and begin processing textile waste as an industrial raw material. The Nordic countries’ first industrial end-of-textile refinement plant will open in Paimio in 2021. The 3,000-square-metre plant is being developed by Rester Oy, which recycles companies' end-of-life textiles and industrial waste materials. LSJH, which processes households’ end-of-life textiles on its production line, will hire part of the plant.

Outi Luukko, Rester Oy’s board chair, says, “The processing plant will begin a new era of textile circular economy in Finland. As industry pioneers, we are launching a system change in Scandinavia. The transition of the textile industry from a linear model to a circular economy is essential, as virgin materials cannot sustain the current structure of the textile industry. And why should it, when there is so much recyclable material available?”

From the perspective of Rester Oy’s main owner, work clothing supplier Touchpoint, the circular economy plant not only represents resource efficiency, but is also necessary from the perspective of the entire life cycle of a responsible work clothing collection.

Luukko adds, “Finding a local solution to a global problem is a huge leap in the right direction and raises Finland's profile as a pioneer of circular economy."

The future plant will be able to process 12,000 tonnes of end-of-life textiles annually, which represents about 10% of Finland’s textile waste. Both production lines produce recycled fibre, which can be used for various industrial applications, including yarn and fabric, insulating materials for construction and shipping industries, acoustic panels, composites, non-woven and filter materials, and other technical textiles, such as geo-textiles.

LSJH is piloting a full-scale refinement plant

LSJH has launched a pilot production line for processing households' end-of-life textiles. Unfortunately, consumers' end-of-life textiles are heterogeneous, making them a challenging raw material for further processing. Before processing, the textiles are sorted by material into various fibre classes using optical identification technology developed by LSJH and its partners. This ensures the quality of the raw material and the resulting fibre products.

Jukka Heikkilä, managing director for Lounais-Suomen Jätehuolto, explains: “On the basis of the experiences gathered from the pilot project, Lounais-Suomen Jätehuolto is preparing a full-scale refinement plant in the Turku region. As soon as 2023, the plant will process Finnish households' end-of-life textiles. The project involves all waste treatment plants owned by Finnish municipalities.”

Paimio has ambitious goals for circular economy companies

Rester’s initiative aims to create a circular economy cluster in Paimio that combines the processing and reuse of end-of-life textile fibres. Paimion Kehitys Oy, which is owned by the City of Paimio and the local association of enterprises, supports the development of circular economy companies in Paimio.

Mika Ingi, managing director for Paimion Kehitys Oy, says, “We want to step out of our traditional municipal role and create significant added value for everyone taking part. That is why we are involved in the development of a new modern service model based on ecosystem thinking. We are piloting the textile cluster, followed in the coming years by clusters focusing on plastic, construction, and energy. The aim of our service is to support and help develop new profitable business by bringing circular economy companies and their potential customers to innovate together."

The foundation stone of the processing plant was laid today (18 August 2020). The processing plant will begin operations in February 2021.

• Technology for dyeing polyester and its blends

TERASIL® BLUE W high wash fastness dye raises operational excellence of mills, providing right-first-time results leading to savings of water, energy and costs.

Huntsman Textile Effects introduces TERASIL® BLUE W, the latest addition to the TERASIL® W/WW range of wash fast disperse dyes. TERASIL® Blue W is designed to meet all major requirements for high performance sportswear and athleisure wear.

Polyester fiber has become the fiber of choice in the textile industry, the demand for polyester and man-made fibers is expected to rise over the long term, as sports and athleisure apparel markets expand around the world. At the same time, leading brands, retailers and mills are increasingly focused on achieving brilliant and deep shades, consistent shade reproducibility, as well as water, energy and cost savings.

TERASIL® BLUE W is developed by Huntsman Textile Effects to provide the leading solution for meeting industry’s wash fastness requirements. TERASIL® BLUE W offers an attractive shade and high build-up for deep blues which stays vibrant. TERASIL® BLUE W also provides quality assurance as products are bluesign® approved and suitable for STANDARD 100 by OEKO-TEX® certified textile products.

Leading fashion and textile industry training centre offers UK professionals hands-on experience with 3D digital design tools
 
EFI™ Optitex®, Electronics For Imaging's global provider of integrated end-to-end 2D & 3D CAD/CAM software solutions for the fashion and apparel industry, today announced its partnership with Fashion Enter Ltd. (FEL), a UK training and technical skills development centre for the fashion and textile industry. FEL has implemented EFI Optitex 3D solutions into its course curriculum.
 
Established in 2006, London-based FEL is a veritable "all-in-one" technology hub for the fashion and textile industry, offering multiple training and technical skills development services encompassing the entire design to production cycle. A not for profit, social enterprise, FEL also provides apprenticeships and adult learning through an Educational Skills and Finding Agency- and Social Enterprise London-approved technical centre supported by Haringey Council, Mayor's Good Growth Fund and online fashion retailer ASOS®.
 
To help lay the foundation for the UK's fashion and textile industry on its imminent journey towards digital transformation, FEL was determined to close the mounting skills gap in both industry and academia and offer UK professionals hands-on experience and exposure to 3D digital design tools. With a keen understanding of the market's growing need for speed, flexibility and shifting demands, in September 2019, FEL selected EFI Optitex as its 3D technology partner. FEL sought advanced 3D solutions that would enable innovative digital design courses, apprenticeships and bespoke training, including collaboration with leading fashion retailers such as Marks & Spencer®, ASOS, Next®, and many others.
 
After a short but highly intensive training period FEL implemented EFI Optitex 3D into its design and production processes, including pattern design and 3D tools for design and fitting. Since the recent implementation, FEL has already reaped the benefits of EFI Optitex 3D fully digital design, from sampling and grading, through to production. During a preliminary implementation phase, EFI Optitex 3D will enable FEL to deliver a wide range of accredited 3D design courses and forge collaborations with new customers, a result of EFI Optitex 3D's intuitive design tools, ease of use, and time and resource savings.

At the Swiss-Egyptian Investment Forum which took place on February 3 in Cairo (Egypt), the Cotton & Textiles Holding Company and Rieter signed additional contracts related to the modernization program for the Egyptian textile industry.

Further Orders from Egypt:

• Contracts for additional projects signed in Cairo
• Order volume is around 30 million Swiss francs
• Order intake in the first half year of 2020 expected

The total volume of the contracts sums up to around 210 million Swiss Francs, including the contracts which had been signed at ITMA 2019 in Barcelona and which represent a volume of around 180 million Swiss Francs.

Rieter expects the full amount of orders to be booked as order intake in the first half year of 2020. So far, 165 million Swiss Francs have been booked.

In its 19th year, the international textile industry exhibition ShanghaiTex will take place from 25 to 28 November 2019. Saurer Twisting Solutions would be delighted to welcome customers and visitors to Saurer's Stand D40 in Hall E1. The focus is on the highly efficient FusionTwister for staple fibre yarns.

The FusionTwister sets the benchmark for the cost-effective production of two-for-one twisted staple fibre yarns. In order to achieve this, we have taken into account the three main factors affecting our customers’ profitability, namely energy, economics and ergonomics.

The machines’ reliably low energy consumption is an important characteristic for decision-makers to take into account. Achieved by means of an optimised spindle drive as well as a great variety of spindle and feeding sizes for all kinds of applications, it is the main element in the equation of production costs.

Power consumption and costs are closely related, with energy efficiency positively influencing the return on investment, since it is daily challenge to process the maximum feeding weight while keeping electricity usage at a comfortable level.

The machine’s short set-up times, fast air threading and easy handling were key considerations with regard to optimising ergonomics.