From the Sector

The innovative technology addresses the growing need for on-demand textile design and production

Kornit Digital, a global market leader in digital textile printing innovation, has announced the introduction of the new Kornit Presto, the only industrial single-step solution for direct-to-fabric printing. The Kornit Presto solution eliminates the need for pre and post treatment of fabric and allows for high-quality printing on a broad variety of fabric types and applications. The Kornit Presto does not consume water in the printing process, making it a environmentally friendly solution.

The new Kornit Presto comes with the NeoPigment Robusto, a Pigment-based ink. Implemented into the Kornit NeoPigmentTM process, the Robusto provides above industry standard wash and rub results and exceptional color fastness across a wide fabric and application range. The Robusto enjoys faster physical and chemical bonding characteristics, enabling a significantly shorter curing time, while providing quality and a wide color gamut.

The Kornit Presto solution suits a wide range of business and application needs in a variety of industry segments, including fast growing segments within the on-demand fashion and home décor markets. It is a highly productive solution, available in multiple configurations and able to print 450 square meters per hour.

Gart Davis, CEO at Spoonflower, the world’s first web-based service for custom, on-demand fabric and design creation and a long-time Kornit customer, commented, “We were thrilled to be able to test the new system and found the Presto to be in a class by itself; it prints beautifully on all kinds of fabrics, in a single-step, with an environmentally friendly dry process, and now at a multiple of productivity.  Our partnership with Kornit continues to be fundamental to our mission to make custom fabric accessible to designers, creative individuals and small businesses all over the world. We can’t wait to get going.”

Techtextil 2019: Schoeller launches its new finishing technology called NanoSphere® Plus. The special effect of this new development is its protection against fingerprints and greasy stains. Furthermore, even after being absorbed by the fabric stains are quickly and easily wiped away without washing.

Every human being leaves its marks. In particular, on daily-use items that are picked up or touched often. Especially on textile surfaces, hand and fingerprints in combination with dirt and dust particles leave an unpleasant, greasy dirt film, which is very difficult to clean.

NanoSphere® Plus, developed by Schoeller Technologies AG, the business unit for technologies at Schoeller Textil AG, works on the basis of a functional chain. Textiles are equipped with a matrix finish to reduce the capillary effect in the textile’s fibers. Especially unpleasant sebum residues and dirt that are often released by finger and handprints are less absorbed by the fabric and can be easily wiped away.

Beside the excellent protection against finger and handprints, textiles with NanoSphere® Plus are additionally water and oil repellent, abrasion resistant and extremely durable. The finishing technology rarely affects the look or feel of the fabric.

Non-washable textiles that are often touched by hands or fingers, or fabrics that are in direct contact with the skin benefit most from this new technology. Therefore, NanoSphere® Plus is ideal for woven fabrics and synthetic leather or synthetic suede for bags, covers of electronical devices, head phones, loud speakers or other items in the field of interior equipment.

• Oerlikon presents its expanded nonwovens product portfolio at the IDEA 2019 in Miami

Neumünster – Oerlikon presents its complete nonwoven plant portfolio for the production of airlaid, meltblown, spunbonded and hybrid materials at this year’s IDEA in Miami from 25–28 March. The focus of its presentation will be on solutions for hygiene, medical and other disposable nonwovens. Visitors to this year’s IDEA can inform themselves on the wide range of products at Oerlikon’s exhibition stand (no. 1724).

Two strong partnerships for disposable nonwovens

While two years ago the Nonwoven business unit of the Oerlikon Manmade Fibers segment focused almost exclusively on solutions for technical applications, the company has now expanded its product portfolio to include solutions for disposable nonwovens by establishing strong partnerships.

Oerlikon & Teknoweb Materials – two strong partners for the nonwoven industry

As early as spring 2017, Oerlikon Manmade Fibers' Nonwoven business unit had entered into a strategic partnership with the Italian company Teknoweb Materials. Teknoweb Materials is an established technology supplier in the field of wipes and other disposable nonwovens. With its LEVRA technology, the company has its own patented, particularly efficient manufacturing process for wipes. It also has extensive process know-how on the making and further processing of these nonwoven materials. The Nonwoven business unit of Oerlikon’s Manmade Fibers segment completes this partnership with its well-established machine and plant solutions. Teknoweb Materials will also be represented at IDEA at the Oerlikon exhibition stand (no. 1724).

Cooperation with Shaoyang Textile Machinery

For spunmelt systems solutions for hygiene and medical applications, Oerlikon has been in cooperation with the Chinese machine and plant manufacturer Shaoyang Textile Machinery since Autumn of last year. The goal of these cooperation partners is to advance the international marketing of spunmelt plants outside of China. Oerlikon Manmade Fibers’ Nonwoven business unit contributes its plant engineering know-how and is responsible for product and process guarantees. Oerlikon also assumes the overall project responsibility as well as world-wide customer service outside of China. In return, Shaoyang, with its headquarters in the city of the same name in the Hunan province, supplies the plant technologies.The advantage for the customer: competitive solutions at an attractive price level with comparatively low investments.

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

More exhibitors than ever joined Yarn Expo Autumn 2018, which was held concurrently with ITMA ASIA + CITME from 15 – 17 October at the National Exhibition Convention Centre (Shanghai). 501 suppliers from 14 countries & regions participated, with new countries to the show including France. This international diversification, as well as strong domestic numbers, demonstrated Yarn Expo’s increasing recognition as a top show in the industry. What’s more, almost 80% of exhibitors were returning from successful past editions, showing their support of the fair.

“Although Yarn Expo was unable to be held concurrently with Intertextile Apparel this year, more industry players recognise this fair as a top show for yarn and this is why the turnout remained very strong,” explained Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK). “Our product range was more diverse than ever as exhibitors increasingly see China as the ideal market to introduce their latest innovations. For example, this year we’ve welcomed premium French linen and advanced Italian chemical fibres. Yarn Expo is a platform that promises to gather all of the top suppliers under one roof for genuine buyers.”

With demand rising within the Chinese market for fancy & specialty yarns, suitable for stand-out fashion trends, the trade potential for this product category was high. Business for eco-friendly and natural yarns was also reported to remain steady this edition, reflected by the India Pavilion which increased in size by around 40% this year.

Wissenschaftler des Instituts für Textilmaschinen und Textile Hochleistungswerkstofftechnik (ITM) der TU Dresden in einem der drei bewilligten Exzellenzcluster der TU Dresden maßgeblich involviert   
 
Ende September erfolgte die Bekanntgabe der Förderentscheidung über Exzellenzcluster durch die Deutschen Forschungsgemeinschaft (DFG) im Exzellenz-Wettbewerb. Drei der insgesamt sechs beantragten Exzellenzcluster der TUD wurden im Rahmen der Exzellenzstrategie des Bundes und der Länder bewilligt. Das ITM war im Vorfeld bei der Beantragung der Exzellenzcluster-Vollanträge mehrere Monate sehr stark eingebunden, so dass die Freude bei den Wissenschaftlern am ITM ausgesprochen groß ist, dass das Cluster „Centre for Tactile Internet with Human-in-the-Loop” (CeTI) bewilligt wurde.   
 
Das „Zentrum für taktiles Internet mit Mensch-Maschine-Interaktion“ der TU Dresden will die Zusammenarbeit zwischen Mensch und Maschine auf eine neue Stufe heben. Menschen sollen künftig in der Lage sein, in Echtzeit mit vernetzten automatisierten Systemen in der realen oder virtuellen Welt zu interagieren. Ab Anfang 2019 arbeiten für dieses Ziel im Exzellenzcluster CeTI Wissenschaftler der TU Dresden aus den Fachgebieten Elektro- und Kommunikationstechnik, Informatik, Maschinenwesen, Psychologie, Neurowissenschaften und Medizin mit Forschern der TU München, des Deutschen Zentrums für Luft- und Raumfahrt und der Fraunhofer-Gesellschaft sowie internationalen Wissenschaftseinrichtungen zusammen. Interdisziplinär erforschen sie Schlüsselbereiche der menschlichen Kontrolle in der Mensch-Maschine-Kooperation, im Soft- und Hardware-Design, bei Sensor- und Aktuatortechnologien sowie bei den Kommunikationsnetzen. Die Forschungen sind Grundlage für neuartige Anwendungen in der Medizin, der Industrie (Industrie 4.0, Co-working) und dem ‘Internet der Kompetenzen‘ (Bildung, Rehabilitation).   
 
Sprecher von CeTI ist Herr Professor Frank Fitzek, Inhaber der Deutschen Telekom Professur für Kommunikationsnetze am Institut für Nachrichtentechnik der TU Dresden.
 
Das ITM wird innerhalb von CeTI seine umfassenden Expertisen auf dem Gebiet der Entwicklung maßgeschneiderter Funktionsmaterialien und -textilien einbringen. Hierbei werden sogenannte eGloves und eBodySuits, also elektronische Handschuhe und Anzüge, entwickelt, die strukturintegrierte faserbasierte Sensor-, Aktor- und Leitungssysteme sowie Verbindungselemente zu weiteren elektronischen Komponenten beinhalten. Derartige eGloves und eBodySuits bilden dabei eine neuartige multimodale Schnittstelle zwischen Mensch und Maschine, indem sie visuelle, akustische und haptische Informationen aufnehmen, interpretieren und zurückgegeben können.  

The Mechanical Engineering Industry Association (VDMA) has awarded two prizes to graduates of the Institut für Textiltechnik (ITA) of RWTH Aachen University - the dissertation prize and the creativity prize of the Walter Reiners Foundation of German Textile Machinery 2018. ITA alumnus Dr Benjamin Weise was awarded the dissertation prize for the development of novel fibres for textile charge storage devices. For their work on a guide to 4D product design, Jan Merlin Abram and Aalon Tal (both ITA students) were honoured with the creativity prize. The dissertation prize is endowed with €5,000 whilst the creativity prize contains a one-year scholarship of €250 per month. Peter D. Dornier, President of the Walter Reiners Foundation and Chairman of the Management Board of Lindauer DORNIER, presented the awards on the 18 September 2018 at the 18th Textile Machinery Forum in the Digital Capability Center in Aachen, Germany.

Graphene revolutionizes all-in-one - supercaps, reduction of terahertz radiation and antistatics

In his dissertation "Development of graphene-modified multifilament yarns for the production of textile charge storage devices", laureate Dr Benjamin Weise developed novel fibres made of polyamide and graphene and further processed them into textile surfaces. The newly developed polyamide graphene fibres are featuring a multitude of advantages:

• Due to their high performance in the charge storage area, they are predestined for use in double-layer capacitors, so-called super capacitors, or supercaps in short. Compared to lithium-ion batteries, supercaps offer significantly higher power density and a longer lifetime as no chemical reactions are taking place. towing to the graphene platelets in the filaments, it is now possible for the first time to integrate a charge storage device directly into a textile without having to sew in a rechargeable battery. This new fibre is therefore suitable for prospective use in smart textiles, for instance in a textile defibrillator.
• The new graphene-modified polyamide fibres can attenuate inident terahertz radiation up to 25 % of their original intensity. Terahertz radiation, for example, offers transmission rates of 100 Mbit/sec and is therefore of high interest for high-performance wireless communication. However, the radiation could damage sensible electronics as in aircrafts if this technology will be used widespread. Consequently, the shielding of the radiation is of high importance, e.g. in the form of fibre composite components in the aircraft, which protect the on-board electronics.
• As the fibres are showcasing a dissipative electrical conductivity, personal protective equipment is another prospective field of application.  

The development of a pilot process for graphene-modified fibres and the production of textile demonstrators are novel and disruptive attainments of Dr Weise’s PhD thesis and the reason for the award ceremony to him. Due to its outstanding properties, the European Union is funding research on graphene within the frame of the "Graphene Flagship" with an overall budget of one billion Euro (source: http://graphene-flagship.eu/project/Pages/About-Graphene-Flagship.aspx).

Modular product design of 4D products is now possible in simplified form

How can three-dimensional products change their shape over time and thus become "four-dimensional"? The students Jan Merlin Abram and Aalon Tal provide answers to this question in their project work "Leitfaden zur Auslegung hybrider morphender Textilien am Beispiel eines Scharniers" (Guidelines for the Design of Hybrid Morphing Textiles Using the Example of a Hinge), for which they were awarded the creativity prize. In their work, the students offer a guideline for the development of a four-dimensional textile from the idea to the demonstrator. Four-dimensional textiles, for example, consist of a hybrid material of elastic textile on which three-dimensional structures are printed. The fourth dimension describes the change in shape and/or a property over a defined period of time (= morphing).  This change is caused by external influences such as light and heat.

Every year, the Foundation of the German Textile Machinery awards prizes for the best dissertation, diploma or master's thesis and the creativity prize for the smartest student research project. Further prizes were awarded to Eric Otto, ITM Dresden, and Susanne Fischer, Reutlingen University.

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

This year’s European Zone will feature around 30 exhibitors from countries including Austria, France, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, Germany and Italy. In addition to this, the Czech Republic will present its debut pavilion, showcasing exhibitors with solutions for technical yarn, fabric processing and nonwoven fabrics.

In addition to this, exhibitors from 12 more countries and regions will present their latest innovations to the market. These include domestic and international exhibitors from China, Hong Kong, India, Indonesia, Israel, Japan, Korea, Saudi Arabia, Taiwan, Thailand, Turkey and the US.

Belt and Road: a success story for Buildtech
Following higher regulations and quality standards that aim to exceed Western levels, demand is high in China for production machinery. What’s more, with the national nonwovens market displaying particularly fast growth, Cinte Techtextil has attracted some of the world’s leading nonwoven and weaving machinery brands.

The fair will showcase leading global exhibitors across 12 application areas. Two areas to watch out for include Buildtech and Mobiltech, which are both performing well in Asia and specifically in China. The Belt and Road initiative brings Buildtech a great deal of benefits through China’s enormous investments in global infrastructure. Adding to this, China’s automobile production has been increasing 3% year-on-year, with particularly high growth seen in new-energy vehicles, SUVs and commercial vehicles. China has become the world’s largest auto producer, and this has been boosting progress in the Mobiltech category.

Cinte Techtextil fringe programme a hub of industry insight
A comprehensive fringe programme will keep Cinte Techtextil fairgoers up to date with industry news, with standout events including the 7th China International Nonwovens Conference. Focusing on the global nonwovens industry, topic highlights include the latest innovations in China’s nonwovens industry, an insight into the North American nonwovens market, future trends in the global hygiene product market, and more. The conference will also discuss innovations and developments in filter materials and the wipe industry.

The first day of the fringe programme will see a panel discussion in hall N1, moderated by the Taiwan Technical Textiles Association (TTTA), with confirmed panellists including DuPont, IBENA Textilwerke and SGS-CSTC Standards Technical Services. The panel will focus on current trends, developments and standards in the protective textile industry.

Other fringe programme events will include seminars and product presentations led by industry leaders on the latest global technologies and market trends, and an Innovation Showcase Area in a variety of application categories. 

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

• FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
• Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
• Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
• Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

• Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
• SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
• Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
• Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
• Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
• Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
• Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.

As the countdown to the 2018 edition of Cinte Techtextil China enters its last two months, the final exhibitor line-up is starting to take shape. A number of leading international and Chinese brands across the fair’s 12 product application areas will feature at the Shanghai New International Expo Centre from 4 – 6 September, with an expected 500-plus total exhibitors from around 20 countries & regions set to feature.

Nonwovens exhibitor highlights

As the fair’s largest product category, buyers have a wide range of domestic and overseas brands to source from, including:

• Johns Manville (US): who will showcase their polyester spunbond, PP & PBT meltblown, glass fibre nonwoven, micro glass fibre nonwoven, hybrid nonwoven, glass fibre needle mat and glass microfibre product lines among others at the fair.
•  J.H. Ziegler (Germany): with over 150 years’ expertise and their own production plant in China, they offer products for acoustic absorption in automotive interiors and exteriors, nonwoven foam composites for leather lamination, needle-punched nonwovens, foam nonwoven composites, laminated nonwovens and natural-fibre nonwovens.
• KOBE-cz (Czech Republic): a new exhibitor to the fair, their nonwoven fabrics, mainly made from glass fibre with temperature resistance up to 800°C, are used for high-temperature isolation in the automotive, marine, energy and building industries. They also have isolation materials made from natural fibres including hemp, wool, cotton and flax.
• TDF Nonwovens (China): one of the leading domestic brands, their specialties are polyester spunbond geotextiles, polyester filament roofing carriers, filter nonwovens, high-strength coarse denier polypropylene spunbond geotextiles and medical & health nonwovens.
• Kingsafe (China): they specialise in the production of fusible interlining and nonwoven fabrics for high-end garments.

Yarn & fibre exhibitor highlights

• Perlon (Germany): has developed a PET based monofilament, HighGrip, which guarantees long-lasting efficiency of conveyor belts, and is available in various types with different tribological characteristics, which they will feature at the fair.
• Sateri (China): is a global leader in viscose rayon made from 100% dissolving wood pulp, and the largest maker of viscose fibre in China. Their natural and high-quality fibre, made from trees grown on renewable plantations, can be found in textiles and skin-friendly hygiene products.
• Cordenka (Germany): producers of industrial rayon, their product range covers rayon tire cord, yarn, single-end dipped cord, short-cut fibre and more.
• EMS-Griltech (Switzerland): will showcase a range of technical fibres & yarns and thermoplastic adhesives at the fair.
• Barnet (Germany): several finished products (nonwovens, spun yarns and fabrics) made with their specialty fibre will be on display at the fair, including OPAN, para-aramid and carbon filament fibres. The application of their specialty fibre in flame retardant and anti-cut gloves and felts will be shown at their booth for the first time.

Coated textiles & solutions exhibitor highlights

• Stahl (the Netherlands): the Dutch company will present new products from their water repellent and flame retardant ranges at this year’s fair. According to the company, as the Chinese government continues its efforts to clean up the environment, eco-friendly chemicals remain in strong demand in the country.
• Sioen (Belgium): will showcase sign materials, truck tarpaulins, tents, membrane fabrics, apparel products, chemicals and specialty products such as inflatable boat fabrics, pool liners and more at Cinte 2018.
• ROWA Lack (Germany): a new exhibitor at this year’s fair, they will present their special lacquer systems and top coatings.
• Trelleborg (Sweden): also a new exhibitor, they will display engineered textiles, especially in the fields of outdoor, medical, protective and automotive.
• FPC Technical Textile (Saudi Arabia): another first-time participant at the fair, they will showcase a range of high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics.
• Zhejiang Jinda New Materials (China): this supplier is known for its coated textiles for industrial, transportation and building uses, as well as warp knitted geo-synthetic materials and printable coated materials for advertisements.

Lenzing to showcase its new VEOCEL nonwovens specialty brand at the fair

First announced in June this year, and featuring at Cinte Techtextil, Lenzing’s new VEOCEL brand is billed as a premium range of nonwovens fibres for daily care, which “provides the nonwovens industry with fibres that are certified clean and safe, biodegradable, from botanic origin and produced in an environmentally responsible production process.” Products in this range can be applied to a multitude of uses including baby care, beauty and body care, intimate care and surface cleaning, under the VEOCEL Beauty, VEOCEL Body, VEOCEL Intimate and VEOCEL Surface brands.