From the Sector

The Lectra Group company announced a new collaboration between TextileGenesis, the textile traceability platform and the Forest Stewardship Council (FSC®). It will enable the implementation, via the TextileGenesis platform, of new solutions to ensure the traceability of cellulose fibers from responsibly managed forests.

In fashion, many textiles such as viscose, lyocell and modal use man-made cellulose fibers. These fibers are themselves made from wood pulp, the production of which can contribute to deforestation.

Founded in 1994, the Forest Stewardship Council (FSC®) is an international NGO whose mission is to promote responsible forest management worldwide. In particular, the organization offers certification for products and raw materials which have been obtained from wood grown in responsibly managed forests, and comes from supply chains where social rights of workers, communities and indigenous peoples have been safeguarded.

Amit Gautam, founder and CEO of TextileGenesis, explains: "We've already been working with Man Made Cellulosic Fiber Producers for several years to facilitate, thanks to our blockchain-inspired technology, the traceability of fibers manufactured by the most virtuous producers, and we've integrated their analysis criteria into our platform. By also becoming an FSC® partner today, we're taking things a step further. This new collaboration will support companies in the traceability of FSC certified fibers and support the administration and data management of FSC Chain of Custody certification. All players in the value chain will benefit from increased transparency and much more reliable upstream data. Fashion brands will be able to demonstrate much more easily that their garments use textiles made from responsibly sourced man-made cellulose fibers."

Fabian Farkas, FSC International Chief Commercial Director, adds: “We are seeing a rapid increase in interest in FSC certification from the textile industry, marking a very positive trend. Through this collaboration with TextileGenesis, we aim to simplify the administrative part of FSC certification for companies within the textile supply chain by automating many required data processes. Our goal is to empower brands to identify opportunities for seamless progress in meeting their FSC procurement policies.”

Following the signature in October 2023 of a memorandum of understanding with the International Cotton Association (ICA) and the launch last January of two consortiums with footwear and leather players, and more recently the announcement of its partnership with the Aid by Trade Foundation (AbTF), the initiator of The Good Cashmere Standard® (GCS), TextileGenesis confirms, with this new collaboration with the FSC®, its central place in the ecosystem of players mobilizing for more sustainable and responsible fashion.

Chargeurs PCC Fashion Technologies has signed a binding agreement to acquire two strategic business units of the Swiss company Cilander, much renowned worldwide for its expertise in the supply of high-end textile fabrics and finishing services for complex textiles used in a wide range of applications.

The project includes the acquisition of the historic factory of the company, Geissbühler, located in Lützelflüh. The factory is a cornerstone of its finishing activities for high-tech textile solutions to address demanding markets such as the military, interior design, sports, and mobility. The site is the legacy of an industrial history that began in 1677, almost 350 years ago. With its Planofil® brand, Cilander markets high-performance textile fabrics for outdoor use, particularly in the nautical world. Cilander also offers a range of finishing options and can tailor-make products to customer specifications.

Under the agreement, CFT PCC also plans to acquire the shirt fabrics business, which mainly comprises the ALUMO brand, founded by Karl Albrecht, joined by Robert Morgen in 1941. For over a century, ALUMO has been at the forefront of offering fabrics made from the finest, highest-quality cotton for men's shirts. The company is the preferred supplier of tailors and specialized luxury brands worldwide, relying on its E-commerce platform.

In addition, Cilander's fabrics business includes the Eugster & Huber brand, aimed at women's fashion brands. The portfolio also comprises Brennet, known for its high-quality fabrics with a contemporary touch, and Swiss Ghutra, a brand specializing in high-end fabrics and headpieces for a clientele in the Middle East.

When completed, this acquisition will strengthen the development capabilities of Chargeurs PCC Fashion Technologies, a leader in interlinings for the garment industry. Thanks to Cilander’s high-tech products and solutions, the business line will open doors to new, particularly demanding niche markets, notably the military market and reinforce its market share in the apparel segment, especially shirt-making.

Stratasys Ltd. is announcing updates to several Industrial and Healthcare Business Unit products and Stratasys Direct. These include a new open platform for the F900™ 3D printer, more on-demand 3D printing capabilities and a new high-performance material for its Fused Deposition Modeling line.

OpenAM comes to the F900
Stratasys OpenAM™ is a software application that enables the user to modify machine controls to achieve results beyond standard print settings. Already available for the Fortus 450®mc printer, Stratasys is now making its OpenAM software available for the F900 printer. This will allow for expanded functionality and capabilities and will unlock new materials for F900 users.

New VICTREX AM 200 material for FDM
A new material offering that opens the application potential for demanding industries like aerospace and medical, where material properties are critical components of a 3D-printed solutions. This new high-performance, high-strength, validated material, VICTREX AM™ 200, will be available for the Fortus 450mc and the F900. VICTREX AM 200 is a PEEK-based polymer that is temperature, corrosion, and chemical resistant, with excellent mechanical properties which can be utilized with soluble and breakaway support material.

Carbon Fiber Visual Print Option for the F-Series
Carbon Fiber Visual Print Option is a new 5-slice (0.005”) layer height across the F-123 Series™ line of printers that is coming later this month for FDM®ABS-CF10. It produces a smoother surface finish, to provide the perfect finish when a part’s visual appearance is important to the application. It is built for applications that demand the durability of a carbon-filled polymer, but also requires a visually appealing result without additional post-processing.

F770 adds New Colors
The F770® printer can now print in multiple colors, in addition to its original single ivory color. Six new ASA colors, including red, white, light gray, black, blue, and yellow, will allow for more application versatility with FDM® ASA and ABS-M30 tried-and-true engineering plastics. The new colors enable printing without painting or other post-production marking, allowing parts to be available much faster, increasing productivity.

Somos NeXt Validated for SLA
Somos® NeXt™ is now a validated material for Stratasys NEO® stereolithography 3D printers. Somos NeXt is a resin with superior strength and can be used in automotive and consumer products, along with other applications, including prototyping, to produce durable, accurate and detailed parts.

New GrabCAD Software Print Integration Enhances On-Demand 3D Printing Capabilities
Stratasys has introduced Parts on Demand by GrabCAD, a new integration that synchronizes the company's software platform with Stratasys Direct. This addition allows GrabCAD Print™ customers to access Stratasys Direct’s fleet of 3D printers, allowing for larger and more intricate designs, a selection of more than 50 engineered materials, and the assurance of stringent quality inspections.

RadiciGroup participated in the fifth edition of Phygital Sustainability Expo, an event dedicated to the ecological transition of fashion and design brands through technological innovation, which was held in Rome on 4 and 5 June.

During the narrated fashion show, held ion the 4th of June in the evocative archaeological site of the Imperial Forum Museum, RadiciGroup presented a jumpsuit. The jumpsuit is made of Radilon Chill-fit, an innovative nylon yarn - made by RadiciGroup in its production sites with low environmental impact. It guarantees thermal regulation and ensures freshness and comfort throughout the day. The jumpsuit worn during the day can quickly turn into the "basis" of an elegant evening outfit by simply adding a kimono-dress, made in nylon, to ensure complete future recyclability.

The outfit is the result of the collaboration between RadiciGroup and the designer Anita Bertini, a young designer at POLI.Design (an international reference for postgraduate training at Politecnico di Milano): the goal is to propose a wardrobe made of essential, durable and recyclable garments, which offer endless possibilities of matching without ever compromising personal style and commitment to a better world.

Two companies from the Italian textile scenario collaborated on this project as technical partners: Calzificio Argopi for the creation of the jumpsuit and Erco Pizzi for the kimono-dress fabric.

Durak Tekstil, a Turkish developer of industrial sewing and embroidery threads, is currently making plans for a new and expanded factory at its base in Bursa, as well as opening a regional office in North America next year.

A continuous focus on R&D and the launch of some highly-differentiated products is driving the success of this third-generation family-owned company, which was initially founded in 1971 to provide Turkey with fishing net twine – at that time 100% imported. Durak then expanded into the production of rayon and polyester embroidery threads before successfully diversifying into a wide range of niche and specialised markets, while growing an international customer base. This growth has been accompanied by continuous investment in the latest advanced production technologies.

Among their products is Duma®, a centreless pre-wound under-bobbin made from strong continuous polyester filaments, which is available in various sizes and thanks to careful selection of raw materials and the use of lubrication methods retains its exact tension from beginning to end.

Working on a similar principle is the Duraless® hollow core thread, and both have a melting points of 260ºC and soften at between 220-240ºC. A high heat tolerance is achieved compared to conventional sewing threads when the shrinkage rate at 150ºC is calculated to be less than 1%. The threads show high resistance to most mineral acids, are unaffected by bleaching and micro-organisms and do not deteriorate in washing and dry cleaning.

Other innovations focus on functionality, including the new SilverPro conductive thread for smart textiles and wearable technologies, luminous Milky Way, Redolent scented thread, the Fire-Safe range of meta-aramids and para-aramids and the Cut Safe range manufactured from various combinations of UHMWPE, glass fibre and elastane.

The Zebun Nessa Mosque, recently completed in Ashulia, Dhaka, is a shining example of the progressive initiatives being undertaken by the Bangladeshi garment industry. Fashion Forum Ltd., a company of IDS Group, spearheaded this project, demonstrating a strong commitment to enhancing the welfare and environment for its workers.

Bangladesh, renowned as the second-largest exporter of ready-made garments globally, is setting new benchmarks in workplace safety, worker welfare, and environmental sustainability. Mr. Idris Shakur, managing director of IDS Group, epitomizes the industry’s progressive outlook. He has dedicated the mosque to the workers of Fashion Forum Limited, naming it in honour of his late mother. The gesture is designed to foster compassion and unity within the industrial community.

The mosque, designed by Studio Morphogenesis and completed in 2023, reflects a forward-thinking architectural philosophy. Sustainability was a core consideration, with the design incorporating recycled red bricks from demolished houses for the exterior walls. Pink concrete, weatherproofed with lime plaster mixed with red brick powder, blends tradition with modernity, creating a spiritual and communal haven for the workers.

A key feature of the mosque is its majestic arched opening facing the qibla, offering worshippers a serene view of the adjacent waterbody and enhancing their connection with nature. The structure's double-layered walls provide thermal comfort and facilitate natural light and ventilation, transforming the mosque into a "breathing pavilion." Enclosed gardens, reminiscent of light courts, provide a peaceful retreat from the bustling industrial environment.

Inside, an intricate perforated metal stairway leads to a crescent-shaped upper floor, dedicated exclusively to the female workers. This space serves as a serene meeting area and prayer room, empowering women and reinforcing their importance within the workforce.

The Zebun Nessa Mosque also showcases advanced construction technology, designed to withstand extreme weather conditions, further underscoring the innovative and resilient spirit of Bangladeshi garment manufacturers.

This mosque stands as a testament to the progressive and compassionate ethos driving Bangladesh’s garment industry. It highlights how manufacturers are not only focusing on economic growth but also prioritising the well-being and empowerment of workers, setting new standards for the industry worldwide.

Breaking new ground in plastics recycling means assessing the value chain from end to end. The big opportunities for the future are in fine-tuning the individual process steps; from the collection of recyclable materials to the recycling process and the end product. This is where the cooperation of Lindner and the EREMA Group comes in, officially launched following the 50/50 founding of the holding BLUEONE Solutions in August 2023 to which shares of Lindner Washtech were contributed. The expertise of EREMA, a manufacturer of extruders and filtration solutions for plastics recycling and the largest company within the EREMA Group, has now been combined with the expert know-how from Lindner Washtech, a leading provider of all-in-one solutions for shredding, sorting and washing plastic feed materials.

Data transfer ensures more efficient recycling processes
Process control is an especially important aspect of plastics recycling, which is why standardising the process control system was what the two companies focused on first. "Together, we have developed a platform that allows data to be exchanged between the extruder and the washing system," says Manfred Hackl, CEO of the EREMA Group at IFAT in Munich. "This enables us to analyse the data more precisely so that effective improvement measures can be deduced." All key parameters are taken into account and monitored via a digital interface. For example, it is possible to use information relating to the current throughput of the EREMA Pre Conditioning Unit to optimise the washing process as soon as possible so that it can compensate for fluctuations in capacity and achieve a significant increase in output. This data transfer represents a new step on the roadmap to digitalization.

High efficiency due to smart energy management
"To ensure sustainable recycling, it is necessary to find the right process for each application and to make sure that the individual process steps are perfectly coordinated," emphasizes Michael Lackner, Managing Director of Lindner. Coordinating the process steps has already achieved initial success in energy management, and a clear example of this is heat recovery. "We use the latent heat generated during the extrusion process as an energy source for the washing and drying process," explains Lackner. "This enables our customers to sustainably reduce their energy costs and carbon emissions".

Making the most of synergies along the value chain
Synergies need to be used to establish the quality standards specified for each end application. "The key question is how we can improve the end product and increase the overall efficiency of the recycling process at the same time," agree Manfred Hackl and Michael Lackner. This will only work if companies work together along the value chain. The industry leaders can already point to several examples where together they have improved recycling processes and made it possible to move away from downcycling. "An example of this is the recycling loop of HDPE starting material, which is processed into high-quality, food-safe rHDPE pellets using our two technologies," says Lackner. Lindner Washtech and EREMA continue to work intensively together to develop strategies for upcycling plastics and increase recycling rates.

adidas and Arsenal reveal the new home kit for the 2024/25 season, that celebrates the rich heritage of The Gunners.

The club’s traditional colours of red and white with a slick navy addition, combine to create a modern looking design, that sees the cannon feature outside the crest on the home kit for the first time since the 1989/90 season. Previously seen on Arsenal away and third kits, the cannon represents an enduring symbol of Arsenal’s history which has been synonymous with the club since its inception.  

The new kit will be worn on pitch for the first time by Arsenal Women when they take on Brighton in the final match of the WSL season on Saturday May 18.

Juki America and Coloreel revealed a partnership that will extend Coloreel’s thread dyeing technology to the sewing industry. With Coloreel, Juki sewing machines can now access millions of precise colors in real time.

Juki’s distributors will get exclusive rights to market and sell Coloreel for sewing machines within North and South America. The first official installation of Coloreel paired with a Juki sewing machine will be at FABRIC Incubator in Arizona, USA, a fashion incubator and garment manufacturer that supports up-and-coming designers.

Indorama Ventures Public Company Limited, a global sustainable chemical company, announced that MSCI awarded the company an upgraded ‘AA’ from ‘A’ rating, ranking it in the ‘Leader’ category for its Environmental, Social, and Governance (ESG) performance towards achieving its ongoing sustainability goals and commitments.

Morgan Stanley Capital International (MSCI), a provider of research-driven indices and analytics, ranked Indorama Ventures among the top 12% of 57 global companies in the commodity chemicals sector. This upgraded rating illustrates Indorama Ventures’ performance to exceed industry peers while minimizing its environmental footprint.