From the Sector

At ITMA 2023 in Milan from June 8-14, BTMA member VeriVide will introduce UltraView – its first all-LED light booth for achieving a new level of consistent and standardised colour assessment.

The company’s light booths and lighting cabinets are specified by major global retailers around the world, who rely on them for establishing and maintaining visual quality standards across their supply chains.

This is no easy feat, given the textile industry’s complex structure and the many process stages each individual garment undertakes from the designer’s desk to the finished garment on the retail shelf – often criss-crossing several continents during the journey.

Benefits
UltraView brings a range of sustainable new benefits to designers, mills and brands, and combined with VeriVide’s successful DigiEye system for non-contact colour measurement and digital imaging, can have a positive impact on a company’s bottom line, bringing savings in time, money and CO₂ emissions.

The new all-LED light booth meets all relevant international lighting and colour assessment standards. The UltraView incorporates the company’s A rated CIE D65 and CIE D50 artificial daylight light sources and includes multiple pre-set point of sale light sources while being fully tuneable for recalibration to the individual requirements of each customer. In the past, individual light booths have had to be dedicated to the stipulated settings of each specific customer’s switch sets. The rapid flexibility of UltraView, however, makes the need for multiple light booths a thing of the past.

It also eliminates the need for the regular bulb changes that were necessary with fluorescents, to provide significant energy savings.

As supply chains continue to move towards digitisation away from time-consuming and expensive physical sampling, a version of the UltraView, VisionView, is available with an internal monitor to enable physical samples to be compared with their digital versions, if required.

DigiEye
For non-contact colour measurement and digital imaging, VeriVide’s DigiEye collects and processes data that can be communicated and shared instantly, enabling manufacturers, producers and processors to speed up quality control, sustain product integrity and reduce waste.

DigiEye also overcomes the limitations of spectrophotometers, which are limited to products with a solid colour appearance and can only measure ‘average’ colour, assessing the limited area of the product exposed in the instrument’s aperture.

These limitations are further compounded if the product has any form of multi-coloured characteristics or appearance, an uneven or inconsistent surface, a colour area too small to be captured by the instrument or any sort of surface effect, such as carpet pile and the sheen of satin and silk.

Svegea of Sweden – a member of TMAS, the Swedish Textile Machinery Association – has recently installed an EC300-S collarette cutter for the high speed production of tubular apparel components as well as an FA350 automatic roll slitter at the plant of Löffler, in Ried im Innkreis, Austria.

The EC 300-S collarette cutter is equipped with the computer-controlled True-Drive II and high pre-feed device, which is used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements. It operates at speeds of up to 20,000 metres per hour. The integrated, fully automatic FA350 roll slitter FA500 roll slitter is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Sports and knitwear specialist Löffler is celebrating its 50th anniversary in 2023. Its plant in Ried houses 25 circular knitting machines and three seamless knitting machines with an annual output of around 905,000 square metres of fabric, and in addition to product development, design, cutting and some sewing are all carried out in-house.

Löffler is known for its transtex under garments, which ushered in the two-layer principle of structures combining hydrophobic polypropylene and other fibres like cotton, Modal, Tencel or merino wool.

Before transtex, endurance athletes usually wore pure cotton underwear next to their skin, which became wet over time and cooled the body down. Löffler’s two-layer fabric prevented this, since the polypropylene does not absorb moisture and instead wicks it to the outside, where it can evaporate to keep the skin dry.

Innovation has been ongoing ever since, and in December, Löffler received an ISPO Award 2022 for transtex Retr’x – its latest functional underwear made from recycled polypropylene from textile waste and a combination of recycled and GOTS-certified organic cotton. Transtex Retr’x is neither dyed or bleached and is Standard 100 by Oeko-Tex as well as Made In Green by Oeko-Tex approved.

In addition to its own branded products, the plant makes sports garments for sister company Fischer, which is also based in Ried, and is at the same time involved in significant government tender projects, including the supply of polo shirts for the Austrian Red Cross and for the German and Austrian police forces. Combined, Löffler and Fischer employ approximately 700 people in the region of Upper Austria.

Over the past year, TMAS, the Swedish Textile Machinery Association, has been working with ClimatePartner on a corporate carbon footprint (CCF) mapping project with its member companies, as a natural step towards supporting a more sustainable textile industry.

Over half of the members of TMAS are participating in the project, which involves calculating each operation’s Scope 1, 2 and 3 emissions in order to identify the current climate impact and areas where reductions can be made.

“Integrating climate action into strategies is becoming increasingly important in Europe and we have decided to take a pro-active role,” says TMAS secretary general Therese Premler-Andersson. “There is growing pressure from customers to be more transparant in this area and forthcoming legislation will soon make it necessary for all to take climate actions. TMAS members, however, recognise the benefit of taking action now, not least in terms of taking responsibility and demonstrating credibility.”

The CCF project’s scope examines all aspects of a business split into five areas:

• Facility Management (heating, electricity, water, cooling agents and waste disposal).
• Employee Mobility (commuting and company cars).
• Business Travel (flights travel by train, rental cars).
• Procurement (production, packaging and office materials).
• Logistics (inbound and outbound).

Primary data is being used wherever possible and emission factors originate from internationally recognised databases such as ecoinvent and GEMIS.

The ClimatePartner measurement programme is based on the guidelines of the Greenhouse Gas Protocol Corporate Accounting and Reporting Standard (GHG Protocol), and factors in all greenhouse gases covered by the Kyoto Protocol. These are carbon dioxide (CO₂), methane (CH₄), nitrous oxide (N₂O), hydrofluorocarbons (HFC), perfluorocarbons (PFC), sulphur hexafluoride (SF₆) and nitrogen trifluoride (NF₃).

Each of these gases affect the atmosphere differently and remain in the atmosphere for different lengths of time. Rather than reporting on each gas separately, they are expressed as a CO₂ equivalent (CO₂e) for the sake of simplicity. A CO₂e is essentially a conversion into a ‘global warming potential’ value that enables the influence of different gases on global warming to be compared.

• Building Leadership Position in Luxury Market

Oerlikon announced that it has signed a definitive agreement to acquire Riri, a leading provider of coated metal accessories for the luxury fashion industry. This transaction marks a milestone in Oerlikon’s growth strategy and diversifies Surface Solutions’ offerings and market access. The transaction is expected to close in the first quarter 2023, subject to regulatory approvals and standard closing conditions.

“Riri is highly complementary to our existing luxury business and will reinforce our fashion jewelry and metallic components for leather goods. It is the ideal next step after our acquisition of Coeurdor in 2021 and will make us a market leader and an integrated provider with a complete offering of coated luxury metalware for high-end fashion brands,” said Michael Suess, Executive Chairman, Oerlikon. “The acquisition will drive cross-selling and strengthen our footprint in the global luxury metalware market, which sees mid- to-high single-digit growth rates annually.”

“Our portfolio, particularly in zippers and buttons, is an excellent fit to Oerlikon’s strengths in coated metal-based fashion components. Together, we are ideally positioned in Italy and France – the two major European fashion hubs – and can provide a complete offering to fashion customers,” said Renato Usoni, CEO, Riri. “We are excited to join Oerlikon as it will allow us to accelerate the luxury goods industry’s sustainability transition to greener technology by applying technologies such as Oerlikon’s PVD¹.”

Riri, headquartered in Mendrisio, Switzerland, is a market leader in metal accessories manufacturing, with a wide product range and unique offering. The company supplies global leading brands in the luxury fashion industry and has a strong foothold in the Italian luxury market. The company has more than 1 100 employees and expects to generate sales of EUR ~170 million (CHF ~165 million) in 2022.

¹ PVD, or physical vapor deposition, coating is a thin-film coating solution that is more environmentally friendly than traditional processes such as chrome plating.

TEXCOM has recently started up two new BRÜCKNER POWER-FRAME stenters for knitted fabric with eight compartments and lubrication-free vertical chain and direct gas heating. This is already the 5th BRÜCKNER line purchased by TEXCOM and the successful continuation of the cooperation with BRÜCKNER since 1979. The third member of this successful alliance is the commercial agency, MAPEKO, which has been active for BRÜCKNER for several decades and in the 3rd generation.

With 3 production plants, a commercial office and 6 sales stores distributed around the country, TEXCOM manufactures and distributes knitted fabrics for a highly demanded market, where sports, technical, fashion and workwear fabrics stand out. The company's own developments, such as Twintex, Polisap, Neodry, Sense, Texcom antibacterial, among other brands, are perfect for sports and leisure due to their technical attributes. The company attaches great importance to the fact that all processed materials have the appropriate current environmental certificate (Öko Tex Standard 100, BlueSign and ZDHC)and efficient as well as responsible chemicals are used.

With more than 100 circular knitting machines and a wide range of possibilities for rotary printing, sublimation, lamination as well as special finishes such as antibacterial or hydrophilic, TEXCOM produces premium sports and leisure wear. This includes the official jersey of Argentina's national soccer team.

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

HydroView
The HydroView hydrostatic head tester is meanwhile designed to measure the penetration of water in materials which have an end use that requires water resistance, such as those in the medical, geotextiles and nonwovens sectors. It is also proving essential in the testing of end-use applications for technical textiles, such as in protective gloves, diving dry suits and winter sports apparel, to fishing waders, roofing, tenting, ground sheets and more.

Monforts has installed and commissioned a new Montex finishing range at the Baltic Works of Halley Stevensons in Dundee, Scotland, to further boost the weatherproofing specialist’s highly flexible operations.

The range, with a working width of two metres, was built at the Montex assembly plant in Austria and consists of a Montex®Coat coating unit in knife execution for paste and foam coating and a Montex 8500 6F stenter.

Founded in 1864, Halley Stevensons has amassed unique technical know-how and manufacturing experience in the art of waxed cotton for weatherproofed fabrics and is able to provide international orders in custom colours and finishes to very low minimum quantities where required. The company exports worldwide and its premium brand customers include Belstaff, Barbours, Filson and J.Crew.

The range has replaced one of the company’s older stenter/coating lines and has already enabled Halley Stevensons to recreate various products with lower coating applications at higher speeds than was previously possible.

Waxed cotton was originally developed by sailors in the early 15th century when Scottish North Sea herring fleets began treating flax sailcloth with fish oils and grease in an attempt to waterproof their sails. Remnants of these sails were used by the sailors as capes to withstand the high winds and sea spray.

By the mid 1850s, sailcloth was being treated with linseed oil, but while initially highly effective, it would yellow and stiffen through weathering over time and eventually lose its waterproofing qualities.

In the years that followed, various treatments were applied to cottons in an attempt to find the most effective weatherproofing solution, and the combination of densely-woven cotton impregnated with a paraffin waxed coating proved most successful. For over 150 years, Halley Stevensons created many different variations of both woven constructions and finishing treatments and now supplies thousands of metres of waxed cotton every year, with each roll produced to custom specifications.

“The beauty of waxed cotton is its durability and longevity,” says Managing Director James Campbell. “The fabrics are breathable, with the wax adjusting to ambient temperatures to be softer and more breathable in warm weather and stiffer and more wind proof in cold conditions.”
While traditional waxes are petroleum or paraffin based, Halley Stevensons has always been comfortable about using a waste product from industry and reusing it to make products that last a lifetime.  

“We are always exploring different finishing techniques and one of our most popular finishes is our hybrid aero – an emulsified blend of waxes,” Campbell says. “This fabric is water repellent but has little wax in the mixture so the handle is much drier to touch than the traditional wet waxes.”

The company has also recently launched a new 100% plant-based wax – Ever Wax Olive – consisting of a blend of olive oil, rape seed and castor bean with comparable water repellence to petroleum and a far better rating than other natural waxes which have come before it.

“The high tradition of skills and fabric innovation imposed by our original guildsmen is still our benchmark standard of honest workmanship today,” Managing Director James Campbell concludes “We use responsibly sourced cotton fabrics and processes that are gentle to the product and low impact to the environment. Our dyeing methods use very low levels of water and our waxes are simply heated up for application and cooled down to store when not in use, meaning no waste discharges. Now, with this new Monforts line, we are also achieving running speeds two-to-three times faster than with the older stenter, combined with less gas usage. It’s proved a great partnership.”

Flat knitting solutions provider SHIMA SEIKI MFG., LTD., Japan, together with its Korean subsidiary SHIMA SEIKI KOREA INC., will participate in the Preview in SEOUL exhibition in Seoul, Korea this month.

Taking advantage of new regulations at the show which allow for the display of textile equipment at the venue this year, SHIMA SEIKI will be showing its latest combination of WHOLEGARMENT® knitting technology that allows a garment to be produced in its entirety without the need for linking or sewing afterward, and SDS®-ONE APEX series design software yields revolutionary game-changing flexibility and efficiency, not to mention sustainability.

Shown for the first time in Korea, whose flat knitting market has a strong following for WHOLEGARMENT® knitwear, is the SWG-XR next-generation WHOLEGARMENT® knitting machine. The SWG- name pays homage to the original SWG-X model of 1997, sharing with it the same 4-needlebed configuration featuring the company's own SlideNeedle™. Add to this a renewed spring-type moveable sinker system, a compact and lightweight carriage featuring 4 systems as well as auto yarn carriers. All contribute up to 25% higher efficiency, higher quality and increased product variety for supporting knits for all seasons. SWG-XR sets new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting.

APEXFiz™ is subscription-based design software that maintains the proven functions that have made SHIMA SEIKI’s SDS®-ONE APEX series design systems so popular with fashion designers. Installed on personal computers, those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

New ideas were exchanged, brainstormed, and discussed freely at members’ booths at the Swiss Textile Machinery Pavilion during the recent Techtextil in Frankfurt. “Customers and researchers met Swiss textile machinery companies to explore the possibility of the not-yet-invented. “We regard our Pavilion as the place where future innovations catch a spark,” says Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association. Further developments in the field of hybrid yarns were a hot topic. One example of this involves producing a yarn which has all the typical characteristics and advantages of carbon – but which also prioritizes careful use of resources, combining carbon fibres with thermoplastics.

Technical textiles cover a vast range of applications, and it’s still growing thanks to intensive research by specialist institutes and universities. Many members of the Swiss Textile Machinery Association maintain long-standing partnership with such bodies. Innovations are often joint efforts.

Feel-good technical fabrics
Some technical textiles feel like a second skin. A well-known example is activewear from the ‘sport tech’ field. Activewear includes breathable clothing, usually consisting of a three-layer-laminate: an inner lining, a breathable membrane in the center, and an outer fabric. The challenge is to bond the individual layers without losing breathability or softness, while meeting technical requirements such as resistance to a number of wash cycles.

Bonding solutions meeting top quality requirements, as well as ambitious standards for environmental protection and sustainability, were reinvented by the Cavitec brand from the Santex Rimar Group. This company’s hotmelt technology uses one-component polymers applied to textiles in a hot, molten state. Bonding based on hotmelts is both water- and solvent-free. Drying and exhaust air cleaning are not necessary, which is an ecological advantage. Energy consumption is also significantly lower. Cavitec hotmelt technology is also developed for laminated medical protection fabrics which are safe, high-quality and sustainable. These fabrics can be washed, sterilized, and used again.   

A second skin with added value is the result of Jakob Müller Group’s cooperation with an institute for an established outdoor fashion brand. They have devised a heating mat applied as an inner jacket. Outdoor gear with a heated inlay offers the wearer a comfortable feeling even in a cold climate. The heating mat is particularly light, breathable, flexible and adjustable to three temperature levels.

Fabrics with these advantages are now possible thanks to multi direct weaving (MDW) technology from the Jakob Müller Group. A lacquer-insulated heating strand is inserted into the base textile as a ‘meander’ using MDW technology. The technology is offered with both label weaving machines and the latest generation of ribbon weaving machines. The textile pocket calculator is another MDW based future-oriented application developed in cooperation with a textile research institute.

Safety and health
Life-saving reliability is a must for vehicle airbags. They have to fulfil high security aspects, and must remain inflated for several seconds when an accident occurs. Airbags made of flat-woven fabric – cut and seamed – can show weakness at seams during the inflation phase. Latest Jacquard technology by Stäubli enables one-piece-woven (OPW) airbags to be produced, creating shape and structure in a single process. The final product is an airbag consisting of a sealed cushion with woven seams. OPW airbag weaving reduces the number of production steps, and increases the security aspects.
Another big advantage of Stäubli’s new weaving technology is the flexibility in formats required in today’s mid- and upper-range cars, where lateral protection (in the seat or in the roof over the door) has become standard and is designed in line with the car shape. Safe airbags are woven on modern high-speed weaving machines. The warp material, the variety of fabric patterns, and the importance of precisely shaped airbags require the use of a robust and reliable Jacquard machine.

A revolution for orthopaedic patients is a knitting machine from Steiger Participations, which uses compressive yarns developed to meet the needs of the specific health market. This machine model was exclusively designed for production with inlaid elastic yarns and offers optimum performance with guaranteed final product quality.

In the orthopaedic field, many Steiger flat knitting machines have already been operating as automatic, custom-made production systems. For example, the dimensions of an injured limb are taken by the doctor and fed into a web-based application. The doctor selects the compression class in the various sections of the item and a data file created by the software automatically applies a preconfigured program. With no human intervention required, the program is generated and produced on the machine, precisely matching the patient’s dimensions. Each product is different, and generally available within 48 hours.

International technology group ANDRITZ will be presenting its innovative nonwovens production solutions for wipe applications at the international World of Wipes (WOW) 2022 conference in Chicago, USA, from June 27 to 29, 2022.

ANDRITZ’s “We Care” sustainability program combines all ESG (Environment, Social, Governance) initiatives, goals, and achievements under one roof. For many years now, ANDRITZ has been offering various nonwoven processes to produce best and cost-effective wipes, for example spunlace, Wetlace and Wetlace CP. ANDRITZ also accompanies nonwovens producers in the move towards sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded-pulp or standard carded wipes. Indeed, hydroentanglement has the advantage of being able to bond any kind of fibers without the use of chemical binders or thermal fusion.

The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the card-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

ANDRITZ has become a member of the board of the Responsible Flushing Alliance (RFA) in the USA. The RFA is an independent, non-profit trade association committed to educating consumers in responsible and smart flushing habits to help reduce damage to the nation's sewage systems. ANDRITZ is deeply involved in this topic with its technologies for 100% dispersible and biodegradable wet wipes and is highly committed to being part of the RFA.