From the Sector

• Sustainability Report 2021 combines financial and non-financial performance indicators
• 2011-2021: 60% reduction in greenhouse gas emissions per metric ton produced. 51.7% renewable source energy achieved
• ESG criteria (environmental impact (E), social values (S), organizational governance (G)) determine sustainability strategy

The new RadiciGroup Sustainability Report has been published. With the goal of continuous improvement, the 2021 report has a broader reporting boundary compared to prior years and takes into consideration all the Group companies, including sales and service companies. Over 30 sites located across Asia, North America, South America and Europe have provided their 2021 data on economic, social and environmental performance.

Not only indicators of a financial nature but also measures of environmental impact (E), social values (S) and good organizational governance (G): the latter so-called ESG criteria have become a priority for RadiciGroup, which is preparing for the new European Union non-financial reporting directive in order to contribute to the transition towards a fully sustainable economic system and increase the value of its companies.

On the environmental front, the themes of climate change and decarbonization are RadiciGroup priorities and part of a policy aimed at the uncoupling of growth and resource usage. The Group undertakes to lower emissions from production and choose limited-impact energy sources. This commitment is confirmed by the numbers: in the 2011-2021 period, total emissions per metric ton produced were reduced by 60%, while renewable source energy used by the Group reached 51.7%. Specific investments to decrease environmental impact are ongoing: in 2021, EUR 3.1 million were allocated to introduce best available techniques and improve emissions abatement and energy efficiency.

RadiciGroup promotes professional growth by valuing competence and investment in training: Group training hours once again rose after the pandemic period from 36,000 hours in 2020 to 46,000 hours in 2021. The training method was often a hybrid, taking advantage of aspects experimented with during the pandemic, that is, less traveling and use of facilities in favour of higher groupwide attendance, without the need for participation limits. Fifty-five percent of total training hours was dedicated to health and safety, which has yielded positive results based on the related indicators.

Angelo Radici, president of RadiciGroup: “Today, the United Nations 2030 Agenda for Sustainable Development is our main guideline on sustainability issues. It shows us an ambitious scenario and urges us to confront a multitude of challenges that affect our enterprise from every point of view. We try to be quick to react and tenacious, staying faithful to our roots and our style, but expanding our perspective to become increasingly more competitive and proactive in the businesses we are engaged in. From the viewpoint of achieving less environmental impact in the future, we propose to be an enabler and facilitator for our stakeholders on themes such as the circular economy, where we see ourselves as protagonists in ecodesign and recycling, as well as innovation, which we put at the service of anyone who is processing and using our products, so as to offer real sustainability solutions together.”

SUPPLY, DEMAND, & TRADE
The latest USDA report featured reductions to figures for both world production and mill-use for both the 2021/22 and 2022/23 crop years.  For 2021/22, the global production estimate was lowered -0.7 million bales (to 116.2 million) and global consumption was lowered -1.9 million bales (to 119.8 million).  For 2022/23, the global production forecast was lowered -1.2 million bales (to 120.7 million) and global consumption was lowered -1.6 million bales (to 119.9 million).

With the decreases in use exceeding the declines in production, figures for global ending stocks increased.  For 2021/22, the projection rose +1.1 million bales (to 84.0 million).  For 2022/23, the forecast increased +1.6 million bales (to 84.3 million).

At the country-level, the largest changes to 2021/22 production were for Brazil (-400,000 bales to 12.3 million) and Uzbekistan (-100,00 bales to 2.7 million).  The largest changes for the 2022/23 harvest were for the U.S. (-1.0 million bales to 15.5 million) and Brazil (-200,000 bales to 13.0 million).

It may be notable that there were no upward country-level revisions for mill-use in either 2021/22 or 2022/23.  The largest revisions for 2021/22 included those for China (-1.0 million to 37.0 million), Vietnam (-400,000 bales to 6.9 million), Bangladesh (-300,000 to 8.0 million), Pakistan (-100,000 bales to 10.9 million), and Uzbekistan (-100,000 bales to 2.7 million).  For 2022/23, consumption estimates were lowered for China (-500,000 bales to 37.5 million), India (-500,000 bales to 25.0 million), Bangladesh (-300,000 bales to 8.6 million), and Vietnam (-300,000 bales to 7.1 million).
The global trade forecast for 2022/23 was lowered -1.1 million bales (to 46.4 million).  The most significant changes on the import side included those for China (-500,000 bales to 10.0 million), Bangladesh (-300,000 bales to 8.5 million), and Vietnam (-300,000 bales to 7.2 million).  On the export side, the largest updates included those for the U.S. (-500,000 bales to 14.0 million) and Australia (+300,000 bales to 6.0 million).
 
PRICE OUTLOOK
Recent volatility was not limited to the cotton market.  A wide range of commodities lost significant value in June.  Between June 9th and July 5th (dates chosen unsystematically to describe the magnitude of declines), cotton fell -25% (NY/ICE December futures), corn fell -19% (Chicago Board of Trade, December contract), soybeans fell -17% (Chicago Board of Trade, November contract), wheat fell -25% (Chicago Board of Trade, December contract), copper fell -20% (London Metal Exchange, nearby), and Brent crude oil fell -12% (ICE, nearby).

The breadth of losses throughout the commodity sector suggests a sea change in investor sentiment for the entire category.  The effects of inflation, the withdrawal of stimulus, rising interest rates, and concerns about a possible recession could all be reasons explaining a reversal of speculative bets, and all could be contributors to the losses.  While the macroeconomic environment can be expected to continue to weigh on prices, there are also supportive forces for the market that are specific to cotton.

The current USDA forecast for U.S. cotton production is 15.5 million bales, and it may get smaller over time because of the severe drought in West Texas.  The current harvest figure is two million bales lower than the 2021/22 number and is equal to the five-year average for U.S. cotton exports (2017/18-2021/22).  On top of exports, the U.S. will need to supply domestic mills with 2.5 million bales.  The last time the U.S. had a severely drought-impacted crop (2020/21), the harvest was only 14.6 million bales.  In that crop year, the U.S. was able to export more than it grew because it had accumulated stocks in the previous year.  The U.S. is coming into the 2022/23 crop year with low stocks.  This suggests U.S. shipments may have been rationed.  Since the U.S. is the world’s largest exporter, this may lend some support to prices internationally.

• New yarns for the contract furnishing world, for industrial sewing threads and the challenge of biodegradable polyester

At the product level, big impulse has been given to the range of industrial sewing threads for various uses, with new references both in the polyester + polyester compositions as well as in cotton + polyester. The industrial threads, marketed as raw material, allow the company to consolidate its position on some strategic markets, such as in Germany.

As a result of the partnership with Trevira® for the spinning of the flame-retardant Trevira^®CS fibre, Filidea Technical Yarns reinforces its offer of non-dyed performant yarns aimed at the world of contract furnishings. The sector of hospitality, of furnishings for public and work spaces, fairs and areas for social-cultural gatherings will find a comprehensive answer to its demands in the Trevira^®CS-based yarns: with regard to fireproof standards, versatility, resistance to wear and tear, excellent colour rendering, and last but not least, the component of fibre sustainability, an essential value for the design of spaces for collective use.

Continuing in the development of sustainable production across the sector, the company has undertaken two important initiatives with other actors in the textile supply chain. Filidea participates in Trick, the European blockchain project – part of the European Horizon 2020 programme – involving 29 partners from six different nations to reinforce the circular economy thanks to the development of a digital platform which is complete, traceable and available to operators in the textile sector.

MagnoLab, the network of enterprises in the textile supply chain, and of which Filidea is one of the founding members, gives the impulse to constant R&D activities. MagnoLab was established in 2022 in order to develop tangible solutions for the sector, to create values and to collaborate with regard to current and future demands.

MagnoLab brings together textile companies which are active at various stages of and with complementary roles in the supply chain, and which work in synergy and share objectives, resourcefulness and long-sightedness, with the aim of developing innovation in a structured way. MagnoLab is also open to welcome new partners.

With the goal of making recycling of lightweight, high-volume fiber and flake recyclate much more economical and, in some cases even possible, Coperion has developed a new version of its ZS-B side feeder. Using the innovative ZS-B MEGAfeed, plastic recyclate with a bulk density under 200 kg/m³, long considered intake-limited and thus not worth recycling, can be reliably fed in large quantities into Coperion’s ZSK twin screw extruder and be concurrently recycled and compounded.

The ZS-B side feeder’s novel design makes it possible to feed very high rates of fiber and flakes, such as PA, PE, PET, and PP. As a result, the ZSK twin screw extruder’s high capacity can be fully exploited when the ZS-B MEGAfeed is used. Very high throughputs in both mechanical and chemical recycling of post-industrial and post-consumer waste are achieved.

Increased Throughput in Numbers
With a ZSK 58 Mc18 twin screw extruder, the throughput increase and thus the potential of the new ZS-B MEGAfeed becomes very clear. When recycling PA fibers with a bulk density of ~40-50 kg/m3, throughputs of 70 kg/h were previously achieved using conventional equipment. When the PA fibers were fed into the ZSK extruder using the ZS-B MEGAfeed, throughputs increased about fourteenfold to 1,000 kg/h. Similar results were achieved recycling carbon fibers with a bulk density of ~50-70 kg/m3; in this case, throughputs increased from 50 kg/h to 2,500 kg/h using the ZS-B MEGAfeed. When recycling PCR (Post-Consumer Recycled) flakes, throughputs increased from 50 kg/h to 700 kg/h, and from 80 kg/h to 1,300 kg/h with multilayer film flakes.

Key to Economical Recycling of A Wide Variety of Plastics
Plastics previously considered not recyclable are becoming a valuable raw material using the new Coperion ZS-B MEGAfeed. For example, PCR flakes or recyclate from carbon fiber-reinforced plastics can now be fed into the ZSK extruder at high feed rates and recycled economically.

In the case of mechanical upcycling, upstream processes necessary for compounding, such as compacting, melting and agglomeration, are completely eliminated using the ZS-B MEGAfeed technology. In this recycling process, flakes and fibers can be fed directly into the ZSK extruder, where they are melted, compounded, devolatilized, and filtered in a single step. In so doing, both investment costs and energy consumption drop. The production process becomes significantly more efficient. Moreover, the thermal product stress is reduced and recyclate quality increases.

Even when recycling PET, the feed rate is no longer a limiting factor. With the ZS-B MEGAfeed, PET flakes and fibers can be fed into the ZSK twin screw extruder in large quantities with no pre-drying or crystallizing, where they can be processed with the highest degree of profitability.

The ZS-B MEGAfeed can also feed large quantities of post-consumer waste, adding appreciable value to the chemical recycling process with the ZSKs. ZSK throughput rates are very high with the ZS-B MEGAfeed. Preheating of the recyclate via mechanical energy input of the twin screws thus becomes even more economical for further processing in the reactor.

Existing Coperion extruders can be retrofitted with ZS-B MEGAfeed technology to greatly expand their spectrum of applications and increase their throughput rates.

Natural fibers are among the most important raw materials in the textile and fashion industry worldwide. For centuries, they have fed millions of people through their cultivation or breeding, and it is impossible to imagine daily life without them. Especially at the moment, natural fibers are gaining special importance due to the intense discussions about sustainable living. Even though natural fibers have accompanied mankind for a long time, they are changeable, technical, and adaptable to the challenges of the textile industry.

The Discover Natural Fibres Initiative (DNFI) is celebrating natural fibres in a program to be conducted during Heimtextil in Frankfurt on 23 June. Anyone with an interest in the role of natural fibres in the world economy, economic indicators of textile activity, innovations in natural fibre research, and updates on proposed EU legislation affecting textiles is welcome to attend.

The program will include various presentations by the previous and current award winners, presentations, and discussions:

Overview of world natural fibre production, employment, and value,

• Economic indicators and impacts of coronavirus on textile industries,
• Updates on innovative uses of natural fibres:
• Use of wool in automobile insulation applications for enhanced sustainability,
• Using cellulose from cotton to produce a biodegradable plastic substitute,
• Manufacturing waterproof fabric from a blend of cotton and jute as sustainable
• Substitute for polypropylene tarps
• Proposed EU textile legislation and potential impacts on natural fibres

Based on the good business development in all four Business Units as well as the mostly successful passing on of increased costs for raw materials, energy and transport to customers, the Board of Management of SGL Carbon SE expects to exceed the given guidance for the fiscal year 2022. Accordingly, SGL Carbon SE is increasing its sales and earnings guidance for fiscal year 2022.

The Company expects to exceed the upper end of the stated range of its Group EBITDApre (earnings before interest, taxes and depreciation adjusted by non-recurring items and one-time effects) guidance for the fiscal year 2022 of EUR 110 - 130 million and is raising its EBITDApre guidance for 2022 to EUR 130 - 150 million. Correspondingly, EBITpre1 (earnings before interest and tax adjusted by non-recurring items and one-time effects) is now forecasted to be between EUR 70 - 90 million (previously: EUR 50 - 70 million). The sales guidance is also raised to around EUR 1.1 billion for the current fiscal year, originally expected to be at the level of the previous year (EUR 1,007.0 million).

In line with the development of earnings, the forecast for return on capital employed (ROCE) of originally 5% - 7% is raised to 7% - 9%. The expectations for free cash flow remain unaffected by the forecast increase. Free cash flow is still expected to be significantly lower in 2022 than in the previous year (previous year: EUR 111.5 million).

The new forecast for fiscal 2022 has been drawn up on the basis of the prevailing market environment and assumes no deterioration in conditions, in particular due to the war in Ukraine and its consequences for the global economy. In particular, it is assumed that sufficient electricity and gas will be available and production lines will remain in operation. The communicated medium-term targets up to 2025 remain unaffected by the forecast adjustment.

SGL Carbon will publish its 2022 half-year figures as planned on August 4, 2022.

SHIMA SEIKI MFG., LTD. announces the release of its new "SHIMA Datamall™" digital content web service.

SHIMA Datamall™ is an online service that allows users to search, browse and purchase a variety of useful data for the planning, production and sales of fashion items. With SHIMA Datamall, users of the SDS®-ONE APEX series 3D design system, APEXFiz™ Design subscription software and SHIMA SEIKI flat knitting machines will be able to streamline their operations and further promote the digital transformation of textile manufacturing, thereby realizing a shift toward sustainable manufacturing.

Digital content available on SHIMA Datamall™, together with yarn data from the yarnbank™ digital yarn sourcing web service, are meant to support knit manufacturing from planning and design to production and sales, by arranging the data on SDS®-ONE APEX and APEXFiz™.

Membership is not limited to users of SHIMA SEIKI products. Anyone can search and browse from digital data comprising over 6,000 items, free of charge. Information gathered on SHIMA Datamall is useful for product planning and ideas for new collections. SHIMA SEIKI users can furthermore purchase and download data to facilitate communication with suppliers.

Cobra International has launched an innovation report highlighting its key composite manufacturing innovations that have reshaped the Windsurfing industry.
Having first begun building windsurf boards in 1978, Cobra continues to drive technology development in the sport and 44 years later, manufactures approximately 80% of the world’s composite windsurf boards. Manufacturing for leading brands such as Fanatic, Starboard, Naish, RRD, JP and Quatro Goya, Cobra has consistently evolved and improved the construction and finishes of the boards that it builds, balancing stiffness, comfort, weight, strength, durability, and aesthetics.
Cobra’s report details key manufacturing innovations including:

• The introduction of its innovative vacuum moulding technique that Cobra perfected just as the popularity of the sport exploded.
• The manufacture of its own composite EPS forming moulds producing strong, watertight cores that are ready to use in production directly from the mould.
• The mass production of sandwich boards with thermoformed PVC foam wrapped around the rails, increasing the board’s strength whilst keeping weight to a minimum.
• Seamless rail construction
• High-volume manufacturing capacity optimized for the finest prepreg carbon foils satisfying the current demand for windsurf foiling equipment
• Development programs with on of the world’s leading carbon fibre fabric producers to create ever lighter biaxial fabrics.

“As we set aside time during the pandemic to upskill, innovate, and look to the future, it was also important that we referred back to our key technology successes. This got us thinking about so many of our developments which led us to create this innovation report. Customers can draw great confidence from the fact that the Cobra team is always working on tomorrow’s next generation product as well as building exceptional quality into each of today’s boards.” Bruce Wylie, CCO, Cobra International

International textile producers meet again in Istanbul, Turkey, from June 14 – 18, 2022 on the occasion of the ITM + Hightex Exhibition. In Hall 9 (Hightex) the exhibitors will present the complete industry value chain from nonwovens raw materials, production machines and accessories to the endproduct. The related industries covered include hygiene, filtration, fabrics and apparel, medical, automotive, wipes, home furnishings and upholstery. DiloGroup offers tailor-made production systems from one supplier and will inform about its portfolio and the latest equipment developments from fibre opening to the finished felt.

DiloGroup will inform about complete lines as well as high speed needlelooms for spunbonds. A new, simplified elliptical needle beam drive makes Hyperpunch technology also attractive for standard application. Hyperpunch HαV allows a more uniform stitch distribution in the preneedling process especially in combination with the new needle pattern 6000X. In a complete needling line this felt homogenization process can be improved further. The new needle pattern 8000X is a milestone in the needle pattern development process and results in endproduct surfaces with low markings over a wide range of advances/stroke.

Another strong pillar of the sales program over decades has been fibre preparation and high speed webforming equipment for other nonwoven technologies. The further development of the high-speed layering principle “Hyperlayer” made progress for better CD strength through a combination of inline cards and crossline card with crosslapper. Particularly, carding machines in a working width above 3.5 m up to 5.1 m have been supplied by DiloSpinnbau as complete high speed carding systems, comprising two or even three cards in a line to directly feed the hydroentangling units of various suppliers. Together with DiloTemafa not only have high throughput rates been achieved in the fibre preparation section of the line but also dedusting filtering and air-conditioning systems have been successfully engineered and integrated.

Together with Sicam, Dilo has combined know-how for hydroentangling technology and therefore can provide complete lines as general contractor including equipment for cutting, winding and packaging.

Another interesting machine is the 3D-Lofter, first presented during ITMA 2019 in Barcelona, which offers a wider range of nonwovens applications by exploring the third dimension. A series of single web forming units which work according to the aerodynamic web forming principle deliver defined fibre masses in varied patterns on a base needlefelt. A stress oriented production of technical formed parts resulting in fibre savings or patterned DI-LOUR or DI-LOOP felts with or without repeat are two examples for this technology which explores new application areas for needlefelts.
The 3D-Lofter technology may also be used “inverted” as “IsoFeed” for filling up bad spots in web mats and thus achieves a better homogeneity of spunlace or airlay products.

The DiloLine 4.0 concept offer I4.0 modules which not only support the user but also facilitate quality control and maintenance by a maximum data transparency in production and control of operation. The Dilo solutions “Smart Start” for a fully automatic start of the production line or “DI-LOWATT” for energy savings are accompanied by Siemens solutions which can be selected via App or Data Cloud “MindSphere”.

• Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.