From the Sector

• Circularity at the centre

PG DENIM, the designer project by Paolo Gnutti, is ready for several important events scheduled for the autumn with ground-breaking interpretations and a new – increasingly green – business model. The occasion is its participation in the Blue Zone at Munich Fabric Start (Munich, 3-5 September 2019), a space which is increasingly often reserved for companies and projects with a high innovation rate in the world of denim.

PG DENIM at the German exhibition will be presenting important product innovations, but most notably new concepts developed for the S/S 2021 season. The focus here is on circularity, seen from a dual perspective: the product with the no longer traditional alternation of seasons, and a sustainabilityoriented approach.

Seasons meet

The new PG DENIM approach is geared towards overlapping seasonality, with less and less marked separations between projects dedicated to the spring-summer and fall-winter lines. The collections by PG DENIM can thus be increasingly defined as a “mix of products without seasonality”. Its focal points are innovation alongside the concept behind the initial idea, as opposed to just the season. This trend, explains Paolo Gnutti, CEO and R&D Head at PG DENIM, is also due to registering the fact that seasonality – in terms of environment and trends – is changing at an increasingly rapid pace. As a response to this situation, the choice has been made to design new collections starting from macro-trends and presenting fabrics for garments which are “easy to wear”, suitable for both warm and cold temperatures, in a true melting pot  of weights and sizes.

The lines for the previous season are thus reintroduced and restyled playing with weights and sizes, within a range where flock meets ultra-light fabric bases, or where vinyl is combined with typically summer weights which shift the fabric towards the world of “paper” with crispy touches, resulting in extraordinarily lightweight and strong items at the same time. Also the GARAGE DENIM has been upgraded with fluid and smoothed touched for garments which are easy to wear and have a strong personality.

Partnership with The Denim Window

The PG DENIM season is also enhanced by its partnership in The Denim Window project, which has resulted in a limited series of Creative Capsule Collections, derived from the idea of bringing together companies which had already worked or were working together, trying to highlight – through small capsule collections – the best of what had already been produced by traditional businesses. This has resulted  in three trailblazing capsules, two of which designed in partnership by PG DENIM and companies the likes of M&J Group, Cadica and Greenwear. Several copies of these collections have been made to travel the world, and – after the official presentation in July – they will have a special corner, The Denim Window, in the Bluezone at Munich Fabric Start.

The “Circular Programme” and the five “Rs” of sustainability

Also the PG DENIM approach to accountability in production processes has been enhanced by implementing the “Circular Programme”. As part of our corporate vision, Italian-style production is combined with compliance with what have become known as “the five Rs”, that is to say key concepts underlying the design and manufacturing model: Reduce (everything you are not using), Repair (everything you can), Reuse (anything available to you), Recycle (all that is left), Respect (everything around you).

This is the philosophy underlying each individual process at PG DENIM, and leading to new specific programmes which have been its business focus over the past few months:

1) Reducing the environmental impact during the fabric dyeing phase in reaction and sulphurbased processes, where the use of chemicals has been reduced by 40%, water consumption by 50% and CO2 emissions by 60%, which has also resulted in better penetration and a better result in the crocking process. This has led to producing 10 new articles which will be launched on the market.

2) Recycling all waste from processing and after use, creating a range of garments where cotton is actually obtained from regenerating these two kinds of waste. In this regard, PG DENIM for now is the only company on the market able to process with a percentage of recycled product exceeding 60% of the total, whereas the average for this kind of manufacturing is generally about 35%.

As regards regular production, on the other hand, PG DENIM follows stringent international standards, including Dtox, Reach and Gots in all its processing phases, also using BCI cottons and the Organic Cotton Standard for raw materials. Last but not least, it was recently awarded the GRS (Global Recycled Standard) certification.

• Ice, style and performance

These are the keywords which describe the new eclectic creations by the Riri Group for the Fall Winter season 2020-2021: a journey through the winter, its atmosphere and its colours Mendrisio, September 2019 - Première Vision Paris (17 - 19 September) will set the stage for the new proposals for the Fall Winter 2020-21 collection by the Riri Group, a leading brand in the zip and button manufacturing sector for high couture and outdoor apparel. A preview of the new collection by the Swiss group will take place at Munich Fabric Start (3 – 5 September).

COLOURS, MATERIALS AND TEXTURES

Winter landscapes and polar tones have inspired the colours of this new collection: nuances of grey, azure and white remind us of the typical tones of ice; also dominant is the presence of blue, intense and rich in contrast thanks to the attractive green inserts; black interventions are then harmoniously inserted as part of the colour palette, creating an appealing interplay of colour references. Tapes, pullers and chains provide new pleasant tactile sensations and unexpected visual inputs, through the search for always new processing methods the iceberg effect reproduced with a laser system, the texture reminding us of snake skin, from marble effect to horn processing, and freehand diamond turning, as well as the three-dimensional drop varnishing and the stylish mother-of-pearl effect.

NOVELTIES

The guiding thread for the new “Winterstorm” collection is the use of nuanced colours and ‘ice-like’ effects, reminding us of winter landscape and climates, as in the new Decor Cristal zip with transparent chain or in the Aquatyre zip, available also in a new luminescent version. Among the new creations, the Metal 3H zip stands out: the smallest and most innovative in the collection, lightweight and with a streamlined design. The provocations for this fall-winter have reached extreme levels, with a zip made of synthetic fur and incorporated buttons, whose cover can be removed and then reapplied, to face polar temperatures with a touch of glamour. Alongside the most fashionable novelties, the research by the Riri group does not cease to surprise in the outdoor sector also as regards buttons. This is confirmed by Rislide, the snap closure with a nylon body and Zama button. The innovative b-lock pressure button – with high lateral hold – has been restyled with a silicone shaped head in three colours. As part of a collection characterised by style and performance elements, it is definitely worth mentioning Zero, also in its invisible version: this button – thanks to its elegant design, combines practicality and style without compromising on performance.

At Munich Fabric Start, TINTEX introduces a new holistic approach to creating textiles that is built on the company’s DNA since 1998 for market leading, natural based, smart and responsible innovation

TINTEX is a unique fabric expert in materials and processes, and is introducing new levels of service to the market. First with the new Colorau® Natural Dye commercial innovation, and secondly with the TINTEX E-Commerce service that connects creativity with easy, direct-to-designer product sourcing.

The third innovation expands the company vision and influence into garment production with the SMART WARDROBE CO.LAB, a new supply chain cooperation working with three leading Portuguese makers.

But first you come and enjoy the unique touch and feel of the latest TINTEX Naturally Advanced fabrics with on-trend innovations enhanced by the new non-salt Colorau® Natural Dye process. This award-winning coloration technology fuses science, and creative innovation as a responsible evolution of better products that can now supply batches over 20kg.

The new A/W 20/21 collection starts from the concept of “WEME”: a Naturally Advanced offer that represents a multifaceted world. WE and ME refers to more than just the individual, but also about community and a collective spirit that seeks to grow the intellectual and spiritual individual needs in a responsive and collective way. It is a nuanced platform to discover a range of unique developments that embody the TINTEX identity through responsible innovation and creativity. Smart ingredients and processes drive innovation enhanced by the TINTEX unique dyeing and finishing expertise.

As the role of lingerie in fashion and athleisure continues to augment, the desire for garments that will meet a new set of values for contemporary consumer lifestyles will flourish.  

ROICA™ - the pioneer of innovative stretch fibres, took this year’s Interfilière visitors on an inspirational journey, aimed at encouraging weavers, designers and brands to “engineer” their portfolio of products in new and exciting ways. The company sets a whole new standard in how creativity and responsibility can come together for a new generation of wardrobe solutions dedicated to the contemporary consumer, carving out a new kind of fashion future.

Below some unique developments born from the collaboration among ROICA™ and key premium brands:

COSABELLA produced by Collezioni SRL: The brand sells in over 100 countries, with a premium collection of 2000 styles for every sector of lingerie and leisurewear. Latest styles use a delicate floral lace by Tessitura Colombo Antonio made with ROICA™ V550 belonging to the ROICA Eco-Smart™ family for their more luxurious upscaled lines.

Livy selects Iluna Group’s contemporary graphic stretch lace with ROICA™ EF for the precious “BELLAGIO” line that includes a soft triangle bralette, a padded bra, a brief and a body for optimal comfort. The must-have range has a stunning aesthetic which represents the unique appeal of this lifestyle brand.

Sarah Borghi: the worldwide known brand of luxury Italian fashion hosiery, tights, and socks. They've dedicated more than 40 years scrutinizing the finest yarns and evolving technologies and breathing flawless life into their unique range of luxurious fashion. Today, Gizeta Calze S.r.l., owner of this brand, has developed the first line made out of sustainable ingredients that will be launched at the ROICA™ booth during Interfilière. The collection, developed in Italy by Almatex, blends together key smart fibers such as ROICA™ EF and Q-Nova®, and ROICA™ V550 with  AMNI SOUL ECO®. 

Vitamin A: the Californian brand offers a unique swimwear line rooted in female empowerment. Vitamin A’s beachwear is made with the finest materials and finishes, ensuring a product that will fit and wear beautifully for years to come. Among the  incorporated more sustainable high-performance fabrics shines a unique jacquard development by Maglificio Ripa with a 3D texture made with the GRS certified premium responsible stretch ROICA™ EF and Q-NOVA® by Fulgar. Vitamin A is a member of 1% For The Planet and  donate to environmental organizations who work to protect our oceans.

Wolford was one of the first brands to explore the real value of ROICA™. Known for its exceptional European Skinwear including legwear, lingerie and bodywear, the company has been striving to develop fully degradable items at the end of the product lifecycle. On top of last year’s award for being Cradle to Cradle Certified™ at GOLD Level certification for the biological cycle, Wolford was also recognised for its technical cycle using Econyl® yarn made by Aquafil (always blended with ROICA™ V550).

Each brand Partner brings a different yarn story firmly into the limelight, and all feature ingredients from the ROICA™ portfolio of yarns respecting the company’s commitment to ‘responsible innovation’, and which all boast important sustainable certifications.

Reinach, Switzerland  - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, recently launched at the ITMA exhibition its new Foron® SP-WF, a range of high wet-fast disperse dyes for sportswear and active wear applications.

The Foron® SP-WF dyes are especially suited for the coloration of polyester fibers and microfibers, and polyester/elastane blends, in exhaustion application.
The Foron® SP-WF dyes were developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

The new product is at the core of Archroma's Fast Sport, a coloration system for polyester knitted sportswear, providing the best fastness in the shortest possible time with a reduced environmental footprint.
The Foron® SP-WF range which includes primary and ternary color grades has been developed to fulfil the high color wet fastness and performance requirements of sportswear manufacturers and brands.
Moreover, the core ternary color grades enable deep shades at lower dyeing temperatures on sensitive polyester/elastane fabrics without causing excessive fiber damage, saving energy resources and meeting the high fastness demand of leading brand companies.

When using Foron® SP-WF dyes as part of the Fast Sport system, manufacturers can in many cases have the potential to significantly reduce their consumption of time, energy, chemical, and water, as well as their CO2 emissions.

“We see a growing demand for apparel in the sportswear and active wear segment, reinforced with the now installed athleisure trend,” says Mark Dohmen, Head of Archroma’s Competence Center Automotive and Synthetic Dyes. “Consumers want deep color that stays put on the fiber and brands are defining their requirements accordingly. With our Foron® SP-WF, we can offer to manufacturers of sportswear textiles a solution that combines high levels of wet fastness with high productivity and low resource consumption. Because it’s our nature!”

• This new version of Modaris speeds up the time to market for collections

Paris – Lectra launches Modaris® V8R2, the latest version of its patternmaking, grading and prototyping 2D/3D solution. This new version of Modaris, the most widely used modeling solution by leading brands in fashion and apparel, offers greater speed, efficiency and precision in product development. With its powerful 3D simulation and collaboration tools, patternmakers are developing patterns faster and speeding up their decision-making procedures. By reducing or eliminating physical prototyping, product development is less expensive and the time to market is as close as possible to trend detection.

To preserve and strengthen its position as a market leader of product development software, Lectra, with this upgrade of Modaris, is giving particular focus to 3D virtual prototyping. Patternmakers can now share with their partners, 360-degree videos, accessible on any device. Designers in response are able to visualize, comment, and approve the style and fit using the new 3D Style module.

New advances have made it possible to reduce the number of physical prototypes by up to 50%. Modaris V8R2 improves the quality of the solution’s 3D simulations and expands its library with new assets (fabrics, 3D top-stitching effects, realistic scenes, lighting studios, Pantone® and Natural Color System®©,…). The solution is now compatible with Vizoo, a high-quality scanner that brings forth a heightened realism to the appearance of fabric swatches, and with other 3D solutions such as Maya, 3DS Max, Iray to make the digital renderings of the prototypes more true-to-life and accurate.

One of the innovative developments of Modaris V8R2 is a special dart feature to help patternmakers add dimension to their garments with ease. Thanks to this new feature, modifying a dart requires half the usual time, resulting in a 50-90% increase in overall patternmaking speed.

Another highlight of this solution, and important nod to the globalized workforce of the fashion industry, is its ability to manage different units of measurement. With Modaris V8R2, Lectra has made it possible for patternmakers and external suppliers the guarantee of size compliance, regardless of the measurement systems used in the countries where production occurs.

Modaris V8R2 is already gaining traction among its pilot customers. Italian womenswear company GGZ was the first to endorse Modaris V8R2. “GGZ is a fast-fashion company and time and quality are of the essence for us. Modaris’s new dart feature helps us save up to 50% of pattern modification time. Additionally, 3D prototyping helps us ensure that pattern volumes and proportions correspond to our designers’ expectations early on, dramatically reducing our lead times,” attests Majla Gottardo, Patternmaker, GGZ.

“We are entering the information age, and we are catering to patternmakers who are dealing with consumers with different tastes, of all body shapes and sizes. Our patternmakers have hundreds of collections to deliver and no time to spare for errors. What we are aiming to do is making their everyday work environment easier for them, by providing the tools to streamline the development process and reduce the number of reworks to achieve the right fit the first-time,” states Céline Choussy, Chief Marketing & Communications Officer, Lectra. “All this is possible with Modaris V8R2.”

wear2wear is an innovative industrial partnership dedicated to high-quality and sustainable clothing. Five expert partners in Europe have come together to cover the entire recycling loop. On cutting-edge production systems, textile fibres from used clothing will be turned into functional fabrics. Schoeller Textil AG is supplying a wholistic textile portfolio for the workwear area. At Schoeller Textil, the recyclable, functional fabrics from the wear2wear concept belong to the Inspire fabric group. These are high-quality protective workwear fabrics made of 100 percent polyester, which offer the greatest clothing comfort and often feel just like cotton. They are also compliant with the stringent requirements of the bluesign® system.

The sustainable wear2wear concept is synonymous with high-quality, responsible clothing. In European operations, textile fibres from used garments are used to produce new functional fabrics. Depending upon the area of intended use, they also meet strict waterproofing, breathability, protection and comfort requirements. To ensure that the raw material cycle comes full circle, these textiles can be recycled again when they reach the end of their service life. As a result, there is no waste, and they go on to produce new garments. As the wear-2-wear partner companies guarantee that – from the quality of the raw materials to the guaranteed recycling end process – these are 100 percent recyclable, functional fabrics made of recycled textile fibres. Water- and dirt-repelling technologies based on renewable raw materials, along with the most advanced membrane technology, will ensure that the textiles are manufactured and impregnated entirely without the use of PFC in the future too.

Five partner companies  
The five European partner companies in the wear2wear cooperation cover the entire recycling loop. Heinrich Glaeser Nachfolger GmbH is a German fibre and yarn producer and the “recycler” in the loop. Märkischen Faser GmbH (D) is the “upcycler” and fibre manufacturer. Carl Weiske GmbH & Co. KG (D) develops the polymers, fibres, yarns, chemical additives and textile systems, and TWD Fibres GmbH (D), a fully-integrated filament yarn producer, covers the entire range of polyester and polyamide 6.6 continuous filament yarns. Schoeller Textil AG, the innovative Swiss company, is responsible for textile production and manufactures sustainable high-tech fabrics with maximum clothing comfort. The matching climate-neutral and similarly 100 percent recyclable PTFE and PFC-free membrane, as well as recycled outer materials and linings, are supplied by Sympatex Technologies (D), the ecological alternative among the textile function specialists. DutchSpirit is a Dutch company which has been dedicated to environment-friendly clothing since 2010. Its mission is to significantly increase the awareness for sustainable clothing and offer recyclable clothing in the workwear segment. DutchSpirit is the initiator for the development of the Inspire products from Schoeller Textil and provided the inspiration for the wear2wear concept. Further garment-making partners who now also belong to the cooperative group include: Anchor Workwear BV (NL), Hüsler Berufskleider AG (CH), Groenendijk Bedrijfskleding BV (NL), Bedrijfskledingdiscounter BV (NL) and Rifka'S (NL).

Two successful events made in Bangladesh where fashion and innovation have, once more, come together to champion change and foster sustainability.

Bangladesh has a mission: to fetch its share in the global 130 billion dollars market of smart apparel by 2025. To reach this goal, the country aims to foster modern, innovative, technology-driven apparel manufacturing and to constantly engage in supply chain conversations.

A fitting stage for these conversations was the 2nd Bangladesh Fashionology Summit that took place on day 1 of the Bangladesh Denim Expo – held on 02-03 May 2019 at the International Convention City Bashundhara. This was a platform for thinkers, innovators, experts, educators to share innovative ideas on this edition’s main theme: “Digitalization – the Next Destination”. Sessions were provided to learn more on how innovation, specifically digitalization, fits in the world of the fashion industry.

Further to an increase in cost of production, the industry is even more compelled to focusing on finding added value for products. Here is where the smart clothing market comes in, an opportunity on which a thriving community of thinkers will commit to lead the “current-generation” garment production into the “next-generation” apparel manufacturing by using latest digital technology.

The Summit has also provided a Tech Innovation Zone (Tech Innovators: Trustrace, Shimmy Technologies, Infinited Fiber, Seachange Technologies, Reverse Resource) in collaboration with Fashion For Good, a platform for innovators to meet with the other components of the eco system, and an Exhibition Zone (Exhibitors: Pivot88, Lectra, Sindabad.com, Pacific Associates, Earlycavehuman, Foursource Group GmbH, A2i-Access to Information, GoBlu, Rudholm Group, QuizRR, BRAC, SNV, SR Asia, Swiss Contact) for companies to showcase their latest innovations, paying special attention to information sharing.

Kornit Digital Ltd. (NASDAQ: KRNT), a company that develops, designs and markets innovative digital printing solutions for the global printed textile industry, today announced it has received an order from DTG2Go, a Delta Apparel, Inc (NYSE American: DLA) company and leader in the direct-to-garment printing and fulfillment marketplace.  
 
The order follows several months of beta-testing of the recently released Kornit Atlas system by DTG2Go, during which Kornit was able to showcase the enhanced features of the most advanced industrial direct-to-garment solution available on the market.  Key features of the Atlas include high volume throughput, attractive cost of ownership and featuring the new NeoPigment™ Eco-Rapid inkset specifically designed for sustainability and retail-quality digital textile printing. Per the agreement, DTG2Go will take delivery of 10 Atlas systems in 2019, along with a significant number of HD upgrades for DTG2Go’s existing Kornit Avalanche systems.  
 
Kornit’s Chief Executive Officer, Ronen Samuel commented, “We are honored to expand our partnership with Delta Apparel as a key technology supplier as they expand their reach with digital printing. Delta’s unique platform strikes at the core of the changing needs in the retail supply chain, by offering a vertically-integrated digital print fulfillment model with quick delivery at an affordable price. The inclusion of the Atlas will greatly enhance the options and capabilities that Delta will be able to offer its customers. The all-new industrial Atlas has leading-edge technology with annual production capacity of over 350,000 impressions and optimizes production efficiency at the best cost of ownership available. We look forward to working collaboratively with Delta to deliver on this order and expand on this important relationship.

• STOP TALKING. START ACTING.
• Climate change is real. And so is the responsibility of every human being to help in reducing waste.

We no longer want to talk about sustainability, we want to act. For January, PREMIUM is partnering with Spanish fashion label and sustainable clothing pioneer ECOALF. The brand will present its lifelong mission and latest collection in a dedicated space as well as an art installation together with conceptual artist Juan Garaizabal.

"2019 is all about digital first and an active debate about social and environmental issues. Transparency and sustainability are key words. By reducing plastic waste on all our shows, teaming up with ECOALF and giving this wonderful brand dedicated space and time for spreading their message, we are taking steps into right direction. Every little action counts. We should talk about the things we do more instead of talking about what we are not doing. We all need to wake up. Now.” – Anita Tillmann, CEO PREMIUM Group

ECOALF creates high-quality garments using recycled materials collected from the bottom of our oceans. Commitment, sustainability and innovation are at the core of everything the company does, resulting in both conscious and stylish urban, adventure, knitwear and activewear pieces.   
 
“I love collaborating with people that also believe we have the opportunity to change the world for the better. It’s no longer about what you do, but how you do it. It is important to stand up for what you believe in, because fashion cannot just be about looking good.” – Javier Goyeneche, President and Founder of ECOALF. 

On Wednesday, January 16th, at 10am and 2pm, Goyeneche will present his brand’s values, philosophy and way of working on the experience floor of SHOW&ORDER X PREMIUM at Kühlhaus, right next to the STATION area. Show visitors, media and other exhibitors are invited to listen, learn and discuss.   
 
The art piece in partnership with Garaizabal unveiled at PREMIUM on January 15th is filled with waste to portray our everyday reality, and purposefully interactive so that visitors can throw their own trash inside the installation. The aim is to educate about correct waste disposal and show that every individual’s decision matters: Stop, Think, Act.