From the Sector

Innovative cleaning cloth material and solvent formulas reduce environmental impact for offset printers
Baldwin Technology Company Inc. has announced innovations within its PREPAC® Advanced product line of original cleaning consumables. Designed for newspaper, commercial web and sheet-fed presses, the new technologies optimize production time by shortening the cleaning cycle and minimizing waste.

All Baldwin original PREPAC consumables offer pre-impregnated wet cloth rolls with high ink and lint absorption capacity, so printers can achieve cleaning results that are 100 percent accurate with every run. The next generation of PREPAC Advanced consumables features unique and regionalized solvent formulas, as well as a new sophisticated cloth material. Compared to other products on the market, Baldwin’s solutions decrease waste up to 50 percent and can cut cleaning cycles in half, enabling up to 100 extra production hours annually.

“Since its introduction in 1995, PREPAC has remained the top choice for pre-impregnated wet cloth rolls. If it’s not Baldwin, it’s not PREPAC,” explained Tomas Anderbjer, President, Precision Applications, at Baldwin. “With the new PREPAC Advanced consumables, Baldwin once again innovates blanket and impression cylinder cleaning for the print industry, providing technologies that optimize productivity and decrease the impact on the environment.”

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

Baldwin Technology Company Inc.’s exclusive and innovative Precision Application System—which realizes substantial savings of water, chemistry and energy while increasing productivity—was designed with companies like HanesBrands in mind.

HanesBrands—whose venerable apparel lines include Hanes, Champion, Playtex, Bali and Maidenform, to name a few—has set significant environmental stewardship goals to reduce energy consumption and water use. The company’s recent investment in Baldwin’s Precision Application Systems, with a textile finishing technology that allows for accurate and controlled placement and therefore, reduced use of end-of-line chemicals and water, will help HanesBrands achieve its environmental sustainability goals. Additionally, Baldwin’s groundbreaking application system improves output through greater flexibility, fewer production steps and increased uptime.

Mike Abbott, HanesBrands Global Director of Research and Innovation, said: “Baldwin fulfilled our requirements to provide a solution that optimizes our productivity while reducing our environmental impact.” HanesBrands thoroughly evaluated the technology for eight months in live production conditions with positive results. Abbott continued: “During the evaluation period of the system, we have had outstanding results in productivity increase, and we can clearly see that this technology will make a great contribution to our future efficiency and sustainability savings.”

Peter Hultberg, Chief Commercial Officer at Baldwin, said: “We are honored to partner with one of the world’s strongest apparel brands to help the company achieve not only its business goals, but also its corporate responsibility goals. The trust the HanesBrands team placed in Baldwin and our innovative application technology marks an important milestone for Baldwin and our quest to redefine the standards of sustainable textile finishing.”

The HanesBrands contract includes an option to supply 15 additional Precision Application Systems.