From the Sector

Reset
293 results
Photo: Mark Stebnicki, pexels
16.08.2022

USDA presents new study of Chinese Cotton Textile Industry

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

Their study reviewed the regional patterns of China’s cotton textile industry development and identified growing geographic separation between cotton production and textile manufacturing since the 1990s using data from Chinese sources. The study investigated spatial patterns of demand for imported cotton by analyzing lists of Chinese companies applying for a share of the import quota from 2016 to 2022. Multiple regression analysis was used to control for potentially confounding influences when investigating whether companies in coastal provinces were more likely to use imported cotton than similarly sized companies in other regions.

Textile manufacturers — the main consumers of cotton — are concentrated in coastal and central regions where the share of China’s cotton production fell from over 50 percent to 10 percent during 2011–21. These geographic changes are a factor influencing global trade in cotton and textiles. Additionally, the use of forced labor in Xinjiang attracted more attention to the industry, prompting the United States and other countries to ban products produced in the region.

This study reviews the economic, geographic, and policy factors reshaping the industry and influencing the global trade of cotton and textile products. The study also examines data on Chinese companies applying for a share of China’s cotton import quota to gain insight about the demand for imported cotton.

China became the world’s largest producer, consumer, and importer of cotton soon after joining the World Trade Organization (WTO) in 2001. Despite adopting a tariff-rate quota (TRQ) system for cotton imports and issuing supplemental quotas in most years, the large number of cotton goods manufacturers that request shares of the quota suggests demand for imported cotton exceeds  the quota.

While the TRQ was intended to protect China’s cotton farmers, many farmers abandoned the labor-intensive crop as wages rose rapidly in many other industries and other crops produced higher returns. In response, officials encouraged cotton production in the relatively remote region of Xinjiang to prevent China from becoming reliant on imported cotton. Xinjiang growers receive a subsidy payment for cotton, and subsidies for machinery and seeds. A transportation subsidy induces textile manufacturers in eastern and central regions to purchase cotton from Xinjiang, which is about 2,200 to 2,900 miles from most of the country’s textile manufacturers. Financial support and other incentives encourage manufacturers to shift operations to Xinjiang.

Textile manufacturers in China are highly interested in importing cotton due to its lower price and quality. China imports about 20 percent of its cotton, and the United States is a chief exporter of cotton to China. While imported cotton is used in all provinces, manufacturers near the eastern seaboard show a greater propensity for imports. Nevertheless, in all regions, domestic cotton has the largest share of mill use.

Between 2016 and 2022, 1,581 companies applied for a share of the TRQ, and 265 companies applied in all 7 years. Most of these companies also applied for supplemental quotas issued with slightly higher tariffs. This large number of applicants suggests that imports could be even greater if quotas did not limit them. The operation of the quota application process is not public information, but data submitted by applicants suggests access to imported cotton is uneven. About 14 percent of applicants said imported cotton comprised over half of the cotton they used. Another 20 percent of companies requesting import quota did not use any imported cotton, suggesting that many applicants are unable to import. Textile manufacturers coped with limits on cotton imports by increasing their use of synthetic, chemical-based fibers or by importing cotton yarn. From 2000 to 2020, China’s yarn imports doubled from under 1 million metric tons to around 2 million metric tons with Vietnam supplying about 45 percent of that total in 2020.

The number of textile manufacturers in Xinjiang applying for a share of the cotton import quota rose from 37 to 68 between 2016 and 2022. However, imports constituted less than 2 percent of  the cotton Xinjiang applicants reported using—and 66 percent of them reported using no imported cotton—suggesting that applications from Xinjiang textile companies were often denied.
Analysis found that applicants in coastal provinces used more imported cotton than similarly sized applicants in other regions. Each location of a multi-plant company must apply separately for tariff-rate quotas. Textile manufacturers in Xinjiang that requested a share of the import quota included branches of some of China’s largest textile companies, but the analysis found that Xinjiang applicants used less imported cotton than similar manufacturing plants located in other regions. China’s role as a cotton importer appears to have peaked, while other countries are increasing their share of imports.

USDA baseline projections suggest that by 2030 Vietnam, Pakistan, Indonesia, Bangladesh, and Turkey will together account for 47 percent of the world’s cotton imports while China will only account for 24 percent. The study cam be downloaded from the USDA website.

More information:
cotton Cotton USA China Xinjiang
04.08.2022

adidas with strong growth in Western markets in Q2

  • Currency-neutral sales up 4%, despite more than € 300 million negative impact from macroeconomic constraints
  • Markets representing more than 85% of the business grow 14% overall
  • Gross margin down 1.5pp to 50.3% reflecting significantly higher supply chain costs
  • Operating profit reaches € 392 million
  • Net income from continuing operations amounts to € 360 million
  • FY 2022 outlook reflects double-digit growth during the second half of the year

“Our Western markets continued to show strong momentum in the second quarter amid heightened macroeconomic uncertainty. With Asia-Pacific returning to growth, markets combined representing more than 85% of our business grew at a double-digit rate,” said adidas CEO Kasper Rorsted. “With sports back at center stage this summer, revenues in our strategic growth categories Football, Running and Outdoor all increased by double digits. However, the macroeconomic environment, particularly in China, remains challenging. The recovery in this market is – due to continued covid-19-related restrictions – slower than expected.

  • Currency-neutral sales up 4%, despite more than € 300 million negative impact from macroeconomic constraints
  • Markets representing more than 85% of the business grow 14% overall
  • Gross margin down 1.5pp to 50.3% reflecting significantly higher supply chain costs
  • Operating profit reaches € 392 million
  • Net income from continuing operations amounts to € 360 million
  • FY 2022 outlook reflects double-digit growth during the second half of the year

“Our Western markets continued to show strong momentum in the second quarter amid heightened macroeconomic uncertainty. With Asia-Pacific returning to growth, markets combined representing more than 85% of our business grew at a double-digit rate,” said adidas CEO Kasper Rorsted. “With sports back at center stage this summer, revenues in our strategic growth categories Football, Running and Outdoor all increased by double digits. However, the macroeconomic environment, particularly in China, remains challenging. The recovery in this market is – due to continued covid-19-related restrictions – slower than expected. And we have to take into account a potential slowdown in consumer spending in all other markets for the remainder of the year.”

Currency-neutral revenues increase 4% despite macroeconomic constraints
In the second quarter, currency-neutral revenues increased 4% as adidas continued to see strong momentum in Western markets. This growth was achieved despite continued challenges on both supply and demand. Supply chain constraints as a result of last year’s lockdowns in Vietnam reduced top-line growth by around € 200 million in Q2 2022. In addition, the company’s decision to suspend its operations in Russia reduced revenues by more than € 100 million during the quarter. Continued covid-19-related lockdowns in Greater China also weighed on the top-line development in Q2. From a channel perspective, the top-line increase was to a similar extent driven by the company’s own direct-to-consumer (DTC) activities as well as increases in wholesale. Within DTC, e-commerce, which now represents more than 20% of the company’s total business, showed double-digit growth reflecting strong product sell-through. From a category perspective, revenue development was strongest in the company’s strategic growth categories Football, Running and Outdoor, which all grew at strong double-digit rates. In euro terms, revenues grew 10% to € 5.596 billion in the second quarter (2021: € 5.077 billion).

Strong demand in Western markets
Revenue growth in the second quarter was driven by Western markets despite last year’s lockdowns in Vietnam still reducing sales, particularly in EMEA and North America, by
€ 200 million in total. In addition, the top-line development in EMEA was also impacted by the loss of revenue in Russia/CIS of more than € 100 million. Nevertheless, currency-neutral sales grew 7% in the region. Revenues in North America increased 21% during the quarter driven by growth of more than 20% in both DTC and wholesale. Revenues in Latin America increased 37%, while Asia-Pacific returned to growth. Currency-neutral revenues increased 3% in this market despite still being impacted by limited tourism activity in the region. In contrast, the company continued to face a challenging market environment in Greater China, mainly related to the continued broad-based covid-19-related restrictions. As a result, currency-neutral revenues in the market declined 35% during the three-months period, in line with previous expectations. Excluding Greater China, currency-neutral revenues in the company’s other markets combined grew 14% in Q2.

Operating profit of € 392 million reflects operating margin of 7.0%
The company’s gross margin declined 1.5 percentage points to 50.3% (2021: 51.8%). Significantly higher supply chain costs and a less favorable market mix due to the significant sales decline in Greater China weighed on the gross margin development. This could only be partly offset by a higher share of full price sales, first price increases and the benefits from currency fluctuations. Other operating expenses were up 19% to € 2.501 billion (2021: € 2.107 billion). As a percentage of sales, other operating expenses increased 3.2 percentage points to 44.7% (2021: 41.5%). Marketing and point-of-sale expenses grew 8% to € 663 million (2021: € 616 million). The company continued to prioritize investments into the launch of new products such as adidas’ new Sportswear collection, the next iteration of its successful Supernova running franchise and first drops related to the Gucci collaboration as well as campaigns around major events like ‘Run for the Oceans.’ As a percentage of sales, marketing and point-of-sale expenses were down 0.3 percentage points to 11.8% (2021: 12.1%). Operating overhead expenses increased by 23% to a level of € 1.838 billion (2021:
€ 1.492 billion). This increase was driven by adidas’ continuous investments into DTC, its digital capabilities and the company’s logistics infrastructure as well as by unfavorable currency fluctuations. As a percentage of sales, operating overhead expenses increased 3.5 percentage points to 32.8% (2021: 29.4%). The company’s operating profit reached a level of € 392 million (2021: € 543 million), resulting in an operating margin of 7.0% (2021: 10.7%).

Net income from continuing operations reaches € 360 million
The company’s net income from continuing operations slightly declined to € 360 million (2021: € 387 million). This result was supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision. Consequently, basic EPS from continuing operations reached € 1.88 (2021: € 1.93) during the quarter.

Currency-neutral revenues on prior year level in the first half of 2022
In the first half of 2022, currency-neutral revenues were flat versus the prior year period. In euro terms, revenues grew 5% to € 10.897 billion in the first six months of 2022 (2021:
€ 10.345 billion). The company’s gross margin declined 1.7 percentage points to 50.1% (2021: 51.8%) during the first half of the year. While price increases as well as positive exchange rate effects benefited the gross margin, these developments were more than offset by the less favorable market mix and significantly higher supply chain costs. Other operating expenses increased to € 4.759 billion (2021: € 4.154 billion) in the first half of the year and were up 3.5 percentage points to 43.7% (2021: 40.2%) as a percentage of sales. adidas generated an operating profit of € 828 million (2021: € 1.248 billion) during the first six months of the year, resulting in an operating margin of 7.6% (2021: 12.1%). Net income from continuing operations reached € 671 million, reflecting a decline of € 219 million compared to the prior year level (2021: € 890 million). Accordingly, basic earnings per share from continuing operations declined to € 3.47 (2021: € 4.52).

Average operating working capital as a percentage of sales slightly decreases
Inventories increased 35% to € 5.483 billion (2021: € 4.054 billion) at June 30, 2022 in anticipation of strong revenue growth during the second half of the year. Longer lead times as well as the challenging market environment in Greater China also contributed to the increase. On a currency-neutral basis, inventories were up 28%. Operating working capital increased 23% to € 5.191 billion (2021: € 4.213 billion). On a currency-neutral basis, operating working capital was up 14%. Average operating working capital as a percentage of sales decreased 0.4 percentage points to 21.0% (2021: 21.4%), reflecting an overproportional increase in accounts payable due to higher sourcing volumes and product costs.

Adjusted net borrowings at € 5.301 billion
Adjusted net borrowings amounted to € 5.301 billion at June 30, 2022, representing a year-over-year increase of € 2.155 billion (June 30, 2021: € 3.146 billion). This development was mainly due to the significant decrease in cash and cash equivalents.

FY 2022 outlook reflects double-digit growth during the second half of the year
On July 26, adidas adjusted its guidance for FY 2022 due to the slower-than-expected recovery in Greater China since the start of the third quarter resulting from continued widespread covid-19-related restrictions. adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% to 13% range), reflecting a double-digit decline in Greater China (previously: significant decline). While so far the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any market other than Greater China, the adjusted guidance also accounts for a potential slowdown of consumer spending in those markets during the second half of the year as a result of the more challenging macroeconomic conditions. Therefore, growth in EMEA is now expected to be in the low teens (previously: mid-teens growth), while revenues in Asia-Pacific are projected to grow at a high-single-digit rate (previously: mid-teens growth). Despite the more conservative view on the development of consumer spending in the second half of the year, adidas has increased its forecasts for North America and Latin America reflecting the strong momentum the brand is enjoying in these markets. In North America, currency-neutral revenues are now expected to increase in the high teens. Sales in Latin America are projected to grow between 30% and 40% (both previously: mid- to high-teens growth).   

Due to the less favorable market mix and the impacts from initiatives to clear excess inventories in Greater China until the end of the year, gross margin is now expected to reach a level of around 49.0% (previously: around 50.7%) in 2022. Consequently, the company’s operating margin is now forecast to be around 7.0% (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion to € 1.9 billion range).

More information:
adidas financial year 2022
Source:

adidas

(c) AVANTI/Hologenix
28.07.2022

AVANTI introduces dog beds powered by CELLIANT®

Hologenix’s CELLIANT® infrared technology, an ingredient in textiles across many categories including bedding, is now offered in a new line of sustainable dog beds. The first performance fabric product from AVANTI, RESPOND is a wellness collection that promotes good health not only for pets but also for the planet. It is made from 100% recycled PET and uses patented CELLIANT technology for unmatched performance.

CELLIANT transforms the body’s heat into full-spectrum infrared energy. This energy is reflected back to the body, making it possible for the tissue and muscle to absorb it, promoting local circulation and tissue oxygenation. This technology helps keep the body dry and at the appropriate temperature. CELLIANT has been demonstrated to enhance energy, endurance, strength, stamina and comfort as well as promote faster recovery and more restful sleep. The RESPOND beds’ orthopedic memory foam filler adds an extra layer of comfort and wellness.

Hologenix’s CELLIANT® infrared technology, an ingredient in textiles across many categories including bedding, is now offered in a new line of sustainable dog beds. The first performance fabric product from AVANTI, RESPOND is a wellness collection that promotes good health not only for pets but also for the planet. It is made from 100% recycled PET and uses patented CELLIANT technology for unmatched performance.

CELLIANT transforms the body’s heat into full-spectrum infrared energy. This energy is reflected back to the body, making it possible for the tissue and muscle to absorb it, promoting local circulation and tissue oxygenation. This technology helps keep the body dry and at the appropriate temperature. CELLIANT has been demonstrated to enhance energy, endurance, strength, stamina and comfort as well as promote faster recovery and more restful sleep. The RESPOND beds’ orthopedic memory foam filler adds an extra layer of comfort and wellness.

Introduced at Interzoo in Germany in May, RESPOND dog bedding was the result of determination by AVANTI leaders Raghav and Devika Modi to become champions of pet wellness and performance products while also aligning with the New Delhi, India-based company’s focus on sustainability.  

Ideal for ailing and senior pets, RESPOND beds are made from GRS-certified 100% recycled polyester CELLIANT yarns and orthopedic memory foam and have natural latex-coated bases for extra skid-resistance. AVANTI pet bed covers are removable and washable.

RESPOND dog beds are offered in nine SKUs, three different shapes and three colorways of each shape: grey, blue/grey and green/grey in shades that are associated with wellness.

More information:
Hologenix Celliant AVANTI Bedding
Source:

Hologenix, LLC

26.07.2022

adidas adjusts outlook for 2022: Declining revenues in Greater China expected

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

As a result, adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% – 13% range). Because of the less favorable market mix due to lower-than-expected revenues in Greater China as well as the impact from initiatives to clear excess inventories in this market until the end of the year, the company’s gross margin is now expected to be around 49.0% in 2022 (previously: around 50.7%). Consequently, the company’s operating margin is now forecasted to be around 7.0% in 2022 (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion – € 1.9 billion range).

So far, the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any other market. Nevertheless, the adjusted guidance also accounts for a potential slowdown of consumer spending in these markets during the second half of the year as a result of the more challenging macroeconomic conditions.

Despite these headwinds, adidas continues to expect double-digit revenue growth during the second half of the year for the total company. In addition to easier prior year comparables, the acceleration will be driven by adidas’ strong product pipeline, the restocking opportunity with its wholesale customers given unconstrained supply as well as the support from major sporting events.

Based on preliminary numbers, adidas’ currency-neutral revenues grew 4% during the second quarter. This increase was driven by strong double-digit growth in North America and Latin America, high-single-digit growth in EMEA (also double-digit growth excluding negative Russia/CIS impact) as well as a return to growth in Asia-Pacific. In euro terms, sales increased 10% to € 5.596 billion. The company’s gross margin declined 1.5 percentage points to a level of 50.3% and operating margin reached 7.0% during the second quarter (2021: 10.7%). Net income from continuing operations was € 360 million in Q2 (2021: € 387 million) supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision.

More information:
adidas financial year 2022
Source:

adidas AG

20.07.2022

AkzoNobel publishes results for second quarter 2022

Akzo Nobel N.V.  publishes results for second quarter 2022

Highlights Grow & Deliver (compared with Q2 2021)

  • Revenue up 14% and 10% higher in constant currencies1, pricing up 16%
  • ROS2 at 8.7% (2021: 13.3%), resulting from lower volumes and continued raw material and freight costs inflation
  • Adjusted EBITDA at €337 million (2021: €419 million)
  • Acquisition of Grupo Orbis completed in April 2022. Intended acquisition of Kansai Paint’s business in Africa announced in June 2022. Intended acquisition of the liquid wheel coatings business of Germany-based Lankwitzer Lackfabrik GmbH announced in July 2022

Highlights Q2 2022 (compared with Q2 2021)

Akzo Nobel N.V.  publishes results for second quarter 2022

Highlights Grow & Deliver (compared with Q2 2021)

  • Revenue up 14% and 10% higher in constant currencies1, pricing up 16%
  • ROS2 at 8.7% (2021: 13.3%), resulting from lower volumes and continued raw material and freight costs inflation
  • Adjusted EBITDA at €337 million (2021: €419 million)
  • Acquisition of Grupo Orbis completed in April 2022. Intended acquisition of Kansai Paint’s business in Africa announced in June 2022. Intended acquisition of the liquid wheel coatings business of Germany-based Lankwitzer Lackfabrik GmbH announced in July 2022

Highlights Q2 2022 (compared with Q2 2021)

  • Pricing up 16%; offsetting the increase of raw material and other variable costs. Volumes 9% lower
  • Operating income at €205 million (2021: €384 million), includes €44 million negative impact from Identified items (2021: €49 million net positive impact). OPI margin 7.2% (2021: 15.3%)
  • Adjusted operating income3 at €249 million (2021: €335 million)
  • Net cash from operating activities decreased to negative €52 million (2021: positive €168 million)
  • Net income attributable to shareholders at €106 million (2021: €261 million)
  • EPS from total operations at €0.60 (2021: €1.40); adjusted EPS from continuing operations at €0.84 (2021: €1.20)
More information:
AkzoNobel Coatings
Source:

AkzoNobel

(c) Archroma
20.07.2022

Archroma releases its Color Atlas online library for open access

Archroma, a leader in specialty chemicals towards sustainable solutions, announced that the 5’760 color references of its Color Atlas library will be available in ASE file format for open access to the users of most design software for fashion, apparel, and textiles. With this, designers and stylists are given open access to the largest library of colors for cotton and polyester.

ASE or .ase (for Adobe Swatch Exchange) files are used to upload, share and access colors through the swatch palette of design software such as Photoshop, Illustrator and most CAD (Computer-aided design) systems.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

The Color Atlas continues to evolve in line with Archroma’s commitment to sustainability through innovation. The company describes its approach as “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”.

Archroma, a leader in specialty chemicals towards sustainable solutions, announced that the 5’760 color references of its Color Atlas library will be available in ASE file format for open access to the users of most design software for fashion, apparel, and textiles. With this, designers and stylists are given open access to the largest library of colors for cotton and polyester.

ASE or .ase (for Adobe Swatch Exchange) files are used to upload, share and access colors through the swatch palette of design software such as Photoshop, Illustrator and most CAD (Computer-aided design) systems.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

The Color Atlas continues to evolve in line with Archroma’s commitment to sustainability through innovation. The company describes its approach as “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”.

All color references available in the Color Atlas have been formulated with products that comply with leading international eco-standards, and can be selected based on the desired sustainability profile.

Each color from the Color Atlas by Archroma® is available for purchase from Archroma as a physical color standard that includes precise digital data and access to global dyeing technical support.

Source:

Archroma / EMG

19.07.2022

IVL: Corpus Christi Polymers plant in Texas resumes construction

Indorama Ventures Public Company Limited (IVL) announced that construction of an integrated PTA-PET plant in Corpus Christi, Texas, will resume in August this year. Corpus Christi Polymers LLC (CCP), a partnership between three companies, is expected to begin production in 2025 and ensure continued cost-competitive production to support the growth of IVL’s global PET operations into the next decade.

CCP was formed in 2018 as a joint venture between Indorama Ventures Corpus Christi Holdings LLC, a subsidiary of Indorama Ventures; DAK Americas LLC, a subsidiary of Alpek S.A.B. de C.V.; and APG Polytech USA Holdings, Inc, a subsidiary of Far Eastern New Century, following the purchase of a partially constructed facility of M&G Resins in Corpus Christi. Each partner will procure its own raw materials and receive one third of the PTA and PET produced at the facility to sell and distribute independently.

Indorama Ventures Public Company Limited (IVL) announced that construction of an integrated PTA-PET plant in Corpus Christi, Texas, will resume in August this year. Corpus Christi Polymers LLC (CCP), a partnership between three companies, is expected to begin production in 2025 and ensure continued cost-competitive production to support the growth of IVL’s global PET operations into the next decade.

CCP was formed in 2018 as a joint venture between Indorama Ventures Corpus Christi Holdings LLC, a subsidiary of Indorama Ventures; DAK Americas LLC, a subsidiary of Alpek S.A.B. de C.V.; and APG Polytech USA Holdings, Inc, a subsidiary of Far Eastern New Century, following the purchase of a partially constructed facility of M&G Resins in Corpus Christi. Each partner will procure its own raw materials and receive one third of the PTA and PET produced at the facility to sell and distribute independently.

Construction of the plant is resuming following a period of pandemic-related disruptions. Through the pandemic, the partners firmly resolved to continue planning amid continued robust demand for PET packaging and the need for shorter supply chains. As the impact of the pandemic eased in 2022, the management team was strengthened in preparation for the resumption in activities.

CCP is expected to be the largest vertically integrated PTA-PET production plant in the Americas, and IVL’s biggest greenfields project in the U.S. since the development of the AlphaPet production facility at Decatur, Alabama in 2009. The new Texas facility is a significant addition to IVL’s leading global footprint, and will expand its coverage to customers across the U.S. The plant’s vertical integration optimizes PTA-PET production and, together with the availability of raw materials Paraxylene and Mono Ethylene Glycol in the U.S., ensures long-term competitive-cost supply for IVL’s locally integrated polyester value chain.

The facility will have nominal annual capacities of 1.1 million metric tons of PET and 1.3 million metric tons of PTA, shared between the partners. It will employ three state-of-the-art technologies: PTA: IntegRex®, PET melt: Invista, and PET solid state: Easy Up (HCIRR – Horizontal Continuous slightly Inclined Rotary Reactor).

CCP is adding to its leadership team to prepare for the new growth opportunities. Mr Russell Wilson will leave his role with IVL as Head of Manufacturing Americas, Combined PET, to take up a new role as Chief Executive Officer of CCP from 18 July. He brings 30 years of Aromatics and PET leadership experience including prior roles with Amoco and BP before joining IVL. Mr Todd Hogue, IVL’s Global Head of EH&S, replaces Mr Wilson as IVL’s representative on CCP’s Board. Mr Michael Day joined CCP as Project Director in June and brings 34 years of construction leadership experience including senior roles with Bilfinger, KBR, and CB&I.  Mr Jeff Shea will assume the role of Chief Operating Officer on 18 July.  Mr Shea has been in the PET industry for the last 22 years and has managed PET sites for the last 17. 

Source:

Indorama Ventures Public Company Limited

19.07.2022

Rieter starts sales process for the remaining land owned by Rieter

  • Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
  • Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
  • EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
  • Action plan to increase sales and profitability
  • Rieter site Winterthur
  • Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level.

  • Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
  • Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
  • EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
  • Action plan to increase sales and profitability
  • Rieter site Winterthur
  • Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level. Despite higher sales, the significant increase in material and logistics costs, additional costs for compensation of the material shortages and the expenditure incurred for the acquisition in the years 2021/2022 resulted in a loss. Rieter is implementing an action plan to increase sales and profitability. The sales process for the remaining land owned by Rieter was initiated.

Order Intake and Order Backlog
Rieter posted an order intake of CHF 869.4 million, which included CHF 176.6 million from the businesses acquired in the years 2021/2022. As expected, demand has thus returned to normal compared with the exceptionally high figure for the prior-year period, but remains well above the average figure for the last five years of around CHF 570 million (first half 2021: CHF 975.3 million, first half 2022 excluding acquisition effect CHF 692.8 million).

The regional shift in demand with investments in additional spinning capacity outside China along with investments in the competitiveness of Chinese spinning mills continues. Rieter benefits from its technology leadership, the innovative product portfolio and the completion of the ring- and compact-spinning system through the acquisition of the automatic winding machine business. The largest order intakes came from India, Turkey, China, Uzbekistan, and Pakistan.

On June 30, 2022, the company had an order backlog of more than CHF 2 100 million (June 30, 2021: CHF 1 135 million). Cancellations in the reporting period amounted to around 5% of the order backlog.

Sales
The Rieter Group posted sales of CHF 620.6 million, which included CHF 68.9 million from the businesses acquired in the years 2021/2022 (first half 2021: CHF 400.5 million).

As a result, sales were significantly higher than in the prior-year period, although preproduced deliveries, which mainly affected the Business Group Machines & Systems, in the three-digit million range had to be postponed until the second half of 2022. The reasons for the postponements were the COVID lockdown in China and supply chain bottlenecks.

EBIT, Net Result and Free Cash Flow
Rieter posted a loss of CHF -10.2 million at the EBIT level in the first half of 2022.

Earnings were impacted by significantly higher material and logistics costs. The price increases already implemented are having a delayed effect, mainly in the Business Group Machines & Systems, and were therefore unable to compensate for the high increase in costs. In addition, costs in connection with material shortages negatively impacted profitability. The result also includes acquisition-related expenses of CHF -11.2 million.

The loss at the net result level was CHF -25.2 million, of which CHF -17.6 million was due to the acquisition.

Free cash flow was CHF -57.1 million, attributable to the build-up of inventories in connection with the high order backlog and postponed deliveries.

Action Plan to Increase Sales and Profitability
Rieter is implementing a comprehensive package of measures with the aim of increasing sales and profitability in the second half of 2022.

The package focuses on two main priorities: Firstly, Rieter is continuing to systematically implement price increases while working to improve the quality of margins of the order backlog, so as to compensate for cost increases in materials and logistics.
Secondly, Rieter is working closely with key suppliers and is developing alternative solutions to eliminate material bottlenecks, as far as possible, in order to safeguard deliveries.

Rieter Site Winterthur
The Board of Directors has decided to begin the process for the sale of the remaining land at the Rieter site in Winterthur (Switzerland). In total, around 75 000 m2 of land will be sold.

Outlook
As already reported, Rieter expects demand for new systems to normalize further in the coming months. Due to the capacity utilization at spinning mills, the company anticipates that demand for consumables, wear & tear and spare parts will remain at a good level.

For the full year 2022, due to the high order backlog and the consolidation of the businesses acquired from Saurer, Rieter expects sales of around CHF 1 400 million (2021: CHF 969.2 million). The reduced sales forecast compared to early 2022 (March 2022: CHF 1 500 million) reflects the impact of global supply bottlenecks. The realization of sales revenue from the order backlog continues to be associated with risks in relation to the well-known challenges.

Despite significantly higher sales, Rieter expects EBIT and net result for 2022 to be below the previous year’s level. This is due to the considerable increases in the cost of materials and logistics, additional costs for compensation of material shortages as well expenses in connection with the acquisition in the years 2021/2022. Despite the price increases already implemented, global cost increases continue to pose a risk to the growth of profitability.

Source:

Rieter Holding AG

(c) adidas AG
15.07.2022

adidas launches its first product in collaboration with Spinnova

The adidas TERREX HS1 is one of the first knitted products to be made in part with Spinnova technology. At least 30% of the fabric in this mid-layer hiking hoodie comes from wood-based SPINNOVA® fibres (other fibres)* and 70% from cotton (organic).

Adidas is committed to helping End Plastic Waste via a three-loop strategy that consists of using recycled materials, materials that can be made to be remade and in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1.  

The first product to emerge from this partnership, the adidas TERREX HS1 mid-layer is a piece of multi-functional gear that works on the trails and then rolls up into its hood for easy storage or to create a pillow on longer adventures. It was designed using UNITEFIT – an all-gender fit system created with a spectrum of sizes, genders, and forms in mind.

The adidas TERREX HS1 is one of the first knitted products to be made in part with Spinnova technology. At least 30% of the fabric in this mid-layer hiking hoodie comes from wood-based SPINNOVA® fibres (other fibres)* and 70% from cotton (organic).

Adidas is committed to helping End Plastic Waste via a three-loop strategy that consists of using recycled materials, materials that can be made to be remade and in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1.  

The first product to emerge from this partnership, the adidas TERREX HS1 mid-layer is a piece of multi-functional gear that works on the trails and then rolls up into its hood for easy storage or to create a pillow on longer adventures. It was designed using UNITEFIT – an all-gender fit system created with a spectrum of sizes, genders, and forms in mind.

Made in part with Spinnova technology , a minimum of 30% of the fabric in the adidas TERREX HS1 comes from wood-based SPINNOVA® fibres (other fibres)* that are made by grinding wood pulp with water into a paste and then spun into a textile fibre.

The product also works with the material’s natural color. Since no dyeing or bleaching is applied, in turn this uses less water compared to the standard dyeing process.

* (Rayon) in US, (New type of cellulose fibre) in China

More information:
adidas Spinnova Fibers fibres Recycling
Source:

adidas AG

12.07.2022

Premium Group: Sucessful restart in Berlin

The premiere of the large Premium Group event cosmos in Berlin was with a number of visitors of 70% compared to before Corona a great success. The new combination of B2B and D2C, entertainment and edutainment, fashion and culture provided a lot of exchange, new input, ideas, contacts and 360 degree inspiration.

In focus: content & communication
With the conferences FASHIONTECH, CONSCIOUS CLUB Conference and The Ground Talks, the Premium Group Team put an additional focus on communication and edutainment. Important topics such as diversity, wellbeing, metaverse and sustainability were discussed and relevant lessons learned for the market, brands and consumers.

The premiere of the large Premium Group event cosmos in Berlin was with a number of visitors of 70% compared to before Corona a great success. The new combination of B2B and D2C, entertainment and edutainment, fashion and culture provided a lot of exchange, new input, ideas, contacts and 360 degree inspiration.

In focus: content & communication
With the conferences FASHIONTECH, CONSCIOUS CLUB Conference and The Ground Talks, the Premium Group Team put an additional focus on communication and edutainment. Important topics such as diversity, wellbeing, metaverse and sustainability were discussed and relevant lessons learned for the market, brands and consumers.

“Restart was a statement!”
“It's been quite a rodeo ride putting together two B2B trade shows, one D2C festival, three conferences, parties, dinners and receptions for so many different audiences and all while the pandemic continues in full swing – barring the rain and flight chaos. I would have wished that even more visitors would have come, but overall the restart was much better than expected. It was definitely an announcement." Anita Tillmann, Managing Partner Premium Group

New togetherness, new exchange, new ideas
With the premiere of the festival for style & culture, The Ground, young consumers and Berlin communities from GenZ and GenY were part of the Premium Group event cosmos for the first time. Almost 6000 fashion enthusiasts and trade visitors came together at The Ground. Exciting conversations, interactive fire moments and cool shows created a special vibe in and around the Palais am Funkturm. The focus was on young target groups wearing, feeling and thinking. How brands can reach young customers, communicate with them and build trust and much more.

New community through 'Larger than Life Ball'
On Saturday, the day with the most visitors at The Ground, the spectacular ballroom event, the Larger than Life Ball, curated by The House of Gorgeous Gucci in the summer garden of the Palais, caused enthusiasm. Numerous stars and friends of the international LGBTQ+ scene from New York, Rio de Janeiro and Berlin celebrated a colourful open-air party for over 5 hours with cool music and live MC, sensational outfits, plateau heels and wild vogueing and dance competitions on a water catwalk.

Must have PEACE charity initiative
The must-have PEACE merch collection initiated because of the Ukraine war in favour of Be An Angel e.v. was very well received. The sale of limited-edition clothing and accessories from Carry, Closed, Drykorn, Eastpak, Lala Berlin, Lee, Le Specs, MCM, Merz b. Swans and Wranglers as well as generous donations from Boss, among others, brought in a total of almost 15,000 euros. The remaining stocks are promoted and sold via influencer accounts.

January 2023: Happy Birthday, PREMIUM!
The next Premium Group event cosmos will take place from Tuesday, January 17th to Thursday, January 19th, 2023 with a B2B focus again at the Berlin exhibition centre. The focus is on a big anniversary: the PREMIUM will be 20 years old! After the successful kick-off, the CONSCIOUS CLUB Conference will also be further developed for the next round.

The Berlin Fashion Week and Premium Group events will take place at the same time again from 2023.

Facts

  • Premium Group event cosmos
  • 2 trade shows: PREMIUM and SEEK
  • 1 festival: The Ground
  • 3 conferences: FASHIONTECH, CONSCIOUS CLUB Conference, The Ground Talks
  • More than 800 participating brands
  • 45,000 sqm total area
  • 50 talks & panels with 85 speakers
  • Newcomer brands: 230 at PREMIUM, 134 at SEEK
Source:

PREMIUM Exhibitions GmbH     

11.07.2022

ROICA™ partners at Milano Unica with their stretch-infused fabrics

ROICA™, Asahi Kasei's premium stretch fiber manufacturer, strengthens its presence in the high fashion segment thanks to its established network of partners, who will present their latest innovations - activated by ROICA™ - at the upcoming edition of Milano Unica, taking place at Rho Fiera Milano from 12th to 14th July 2022.

Going more in depth in the offers of ROICA™ partners for this season of Milano Unica, they are:

ROICA™, Asahi Kasei's premium stretch fiber manufacturer, strengthens its presence in the high fashion segment thanks to its established network of partners, who will present their latest innovations - activated by ROICA™ - at the upcoming edition of Milano Unica, taking place at Rho Fiera Milano from 12th to 14th July 2022.

Going more in depth in the offers of ROICA™ partners for this season of Milano Unica, they are:

  • Cifra, which presents its innovative garments for men and women, combining fashion and function. Base layers, tops, leggings and jumpsuits are made with natural yarns, or recycled pre- and post-consumer yarns in combination with ROICA™ EF, the sustainable recycled stretch yarn able to complete proposals that offer design, performance and responsibility. The design of the garments, created in Cifra's design office, offers a perfect shape with body mapping technology that creates dedicated ventilation zones, for a feeling of comfort and freshness as well as an innovative aesthetic impact.
  • Iluna Group, whose journey into the new dimension of responsibility continues with developments in GRS (Global Recycled Standard) certified recycled yarns aimed at unprecedented effects in looks, performance and hands. Brand new for this edition of Première Vision is the inclusion of GOTS-certified organic cotton in GRS-certified galloons and allover lace containing ROICA™ EF, so as to meet market demands for natural comfort in the underwear sphere.
  • Maglificio Ripa, which presents the Splash collection for summer 2024, developed in two major themes, united by the same focus on sustainability that results in the use of recycled pre- and post-consumer polyamide and polyester yarns including ROICA™ EF for the sustainable recycled stretch fiber. The first theme encompasses printed, 3D jacquard fabrics, ennobled by innovative processes that move the bottoms for an organic and sometimes irreverent final look. The second theme embodies a cocoon spirit, enveloping like a caress, soft as a hug.
  • Penn Textile Solutions/Penn Italia, whose highlights of the new collection are on one side fabrics developed with the use of Neride eco yarns by Nurel with ROICA™ V550, characterized by restraining lace effect, soft touch and breathable, in combination with tulle as a sustainable basic, and on the other side charmeuses with soft hand, raw cut in combination with a band fabric from the dreamshape family with reinforced gripping edge, made again in Neride eco yarns by Nurel with ROICA™ V550
  • Piave Maitex, whose orientation is, as always, to present new products with the right  balance between technological innovation and aesthetic look, between fashion and comfort, proposals that include sustainable fabrics made in recycled polyester,  polyamide and the sustainable recycled stretch fiber ROICA™ EF, three-dimensional and optical, perforated, plush effects, made by prioritizing technical functionalities such as waterproofness, breathability, transfer and moisture management, opacity and anti-UV as well as anti-abrasion.
  • Sitip, which is one of the premium partners, together with ROICA™, for the creation of the first Scott Racing Team’s responsible biking uniform. This year, the evolution of research and development has also led to the creation of new responsible shorts, made with NATIVE-THUNDERBIKE POWER fabric by Sitip in recycled polyamide and ROICA™ EF yarn by Asahi Kasei. A fabric designed for high-performance sports, particularly suitable for making cycling pants for its maximum coverage and UV protection - thanks to ECLIPSE Sun Protection technology - breathability, comfort and fit. Also the shirt has been produced with Sitip recycled fabrics - NATIVE-BICIMANIA and NATIVE-PIRATA - made with Asahi Kasei's ROICA™ EF sustainable, stretch and certified recycled yarns.
07.07.2022

Carbios, On, Patagonia, PUMA and Salomon team up to advance circularity

Carbios has signed an agreement with On, Patagonia, PUMA, and Salomon, to develop solutions that will enhance the recyclability and circularity of their products.
 
An important element of the two-year deal will be to speed up the introduction of Carbios’ biorecycling technology, which constitutes a breakthrough for the textile industry. Carbios and the four companies will also research how products can be recycled, develop solutions to take-back worn polyester items, including sorting and dismantling technologies, and gather data on fiber-to-fiber recycling as well as circularity models.
 
The challenge the four brands share, is that their ambitious sustainable development goals can only partially be met by conventional recycling technologies which mostly target bottle-to-fiber recycling. Future regulations will require more circularity in packaging and textile. Yet the market consensus is that there will soon be a shortage of PET bottles, as they will be used for circular production methods in the Food & Beverage Industry.   
 

Carbios has signed an agreement with On, Patagonia, PUMA, and Salomon, to develop solutions that will enhance the recyclability and circularity of their products.
 
An important element of the two-year deal will be to speed up the introduction of Carbios’ biorecycling technology, which constitutes a breakthrough for the textile industry. Carbios and the four companies will also research how products can be recycled, develop solutions to take-back worn polyester items, including sorting and dismantling technologies, and gather data on fiber-to-fiber recycling as well as circularity models.
 
The challenge the four brands share, is that their ambitious sustainable development goals can only partially be met by conventional recycling technologies which mostly target bottle-to-fiber recycling. Future regulations will require more circularity in packaging and textile. Yet the market consensus is that there will soon be a shortage of PET bottles, as they will be used for circular production methods in the Food & Beverage Industry.   
 
Carbios’ innovative process constitutes a technological breakthrough for the recycling of polyester (PET) fibers, which are widely used in apparel, footwear and sportswear, on their own or together with other fibers. PET polyester is the most important fiber for the textile industry with 52 MT produced, even surpassing cotton at 23MT. The biorecycling process uses an enzyme capable of selectively extracting the polyester, recovering it to recreate a virgin fiber. This revolutionary technology makes it possible to recover the PET polyester present in all textile waste that cannot be recycled using traditional technologies.
 
PET plastics and fibers are used to make everyday consumer goods such as bottles, packaging and textiles. Today, most PET is produced from fossil resources, then used and discarded according to a wasteful linear model. By creating a circular economy from used plastics and fibers, Carbios’ biorecycling technology offers a sustainable and more responsible solution.

More information:
Carbios PET circularity
Source:

Carbios

30.06.2022

Milano Unica and C.L.A.S.S. join forces

C.L.A.S.S. will join forces with Milano Unica, 12-14 July, to push the change towards a new generation of fashion through its C.L.A.S.S. SMART SHOP: an online space offering eco-high-tech materials representing a range of categories able to create a new generation of fashion. It is dedicated to students, designers and new generation brands who want to explore and test premium materials mixing style, innovation and responsibility

The C.L.A.S.S. SMART SHOP partners exhibiting at Milano Unica are: ALBINI GROUP, ILUNA GROUP and ZIGNONE.

C.L.A.S.S. will join forces with Milano Unica, 12-14 July, to push the change towards a new generation of fashion through its C.L.A.S.S. SMART SHOP: an online space offering eco-high-tech materials representing a range of categories able to create a new generation of fashion. It is dedicated to students, designers and new generation brands who want to explore and test premium materials mixing style, innovation and responsibility

The C.L.A.S.S. SMART SHOP partners exhibiting at Milano Unica are: ALBINI GROUP, ILUNA GROUP and ZIGNONE.

Source:

C.L.A.S.S.

(c) Willy Bogner GmbH & Co. KGaA
28.06.2022

BOGNER: GREGORY SIFF Capsule Collection Fall/Winter 2022

FIRE+ICE introduces as a special highlight in the Fall/Winter season 2022 an exlusive collaboration with acclaimed American artist Gregory Siff. Gregory Siff is best known for his highly emotive style, which merges abstraction, pop and action painting. By using inks, acrylic and spray paint, he creates iconic elements, capturing time and nostalgia.

Gregory Siff applies his hand-signature in a special print story and creates iconic elements out of FIRE+ICE’s unique DNA and story, which begins with Willy Bogner’s 1986 film. He creates artworks in black and white or combined with bright colors, which are applied to the FIRE+ICE styles using various print and jacquard techniques.

FIRE+ICE introduces as a special highlight in the Fall/Winter season 2022 an exlusive collaboration with acclaimed American artist Gregory Siff. Gregory Siff is best known for his highly emotive style, which merges abstraction, pop and action painting. By using inks, acrylic and spray paint, he creates iconic elements, capturing time and nostalgia.

Gregory Siff applies his hand-signature in a special print story and creates iconic elements out of FIRE+ICE’s unique DNA and story, which begins with Willy Bogner’s 1986 film. He creates artworks in black and white or combined with bright colors, which are applied to the FIRE+ICE styles using various print and jacquard techniques.

Source:

Willy Bogner GmbH & Co. KGaA

(c) Borealis
28.06.2022

Borealis introduces portfolio of circular base chemicals

  • The Borvida™ portfolio introduces sustainable base chemicals to Borealis’ range of product offering
  • The range will initially be based on non-food waste biomass, and chemically-recycled waste; in the future it will also draw from atmospheric carbon capture
  • The traceability of the content will be based on Mass Balance, which is ISCC PLUS certified
  • This is the next step in an ambitious sustainability journey, which will see Borealis move away from traditional fossil-based feed

Borealis is strengthening its EverMinds™ circular product offering with Borvida™, a range of sustainable base chemicals.

The Borvida portfolio will offer base chemicals or cracker products (such as ethylene, propylene, butene and phenol) with ISCC Plus-certified sustainable content from Borealis sites in Finland, Sweden and Belgium. The move is part of Borealis’ broader commitment to a Future-Positive Revolution, in which the unrivalled benefits of base chemicals and polymers can be enjoyed at minimal impact to the planet.   

  • The Borvida™ portfolio introduces sustainable base chemicals to Borealis’ range of product offering
  • The range will initially be based on non-food waste biomass, and chemically-recycled waste; in the future it will also draw from atmospheric carbon capture
  • The traceability of the content will be based on Mass Balance, which is ISCC PLUS certified
  • This is the next step in an ambitious sustainability journey, which will see Borealis move away from traditional fossil-based feed

Borealis is strengthening its EverMinds™ circular product offering with Borvida™, a range of sustainable base chemicals.

The Borvida portfolio will offer base chemicals or cracker products (such as ethylene, propylene, butene and phenol) with ISCC Plus-certified sustainable content from Borealis sites in Finland, Sweden and Belgium. The move is part of Borealis’ broader commitment to a Future-Positive Revolution, in which the unrivalled benefits of base chemicals and polymers can be enjoyed at minimal impact to the planet.   

The portfolio will initially comprise Borvida B, from non-food waste biomass, and Borvida C, from chemically-recycled waste. In the future, the range will evolve to include Borvida A, sourced from atmospheric carbon capture. Borvida is complementary and is the building block to Bornewables™, a portfolio of polyolefins based on renewably-sourced second generation feedstocks, and Borcycle™, which offers circular polyolefins produced from mechanically- and chemically-recycled plastic waste.

Borealis produces a wide range of base chemicals for use in numerous industries based on various feedstock, such as naphtha, butane, propane and ethane. Through its olefin units (steam cracker and propane dehydrogenation), it converts these into the building blocks of the chemical industry: ethylene, propylene and C4 hydrocarbons (butylenes, ethyl tertiary-butyl ether (ETBE) and butadiene), and C5-6 hydrocarbons (pygas, phenol) among others.

The basis of the Borvida portfolio is Mass Balance, a Chain of Custody model that enables sustainable content to be tracked, traced, and verified through the entire value chain, offering sustainability-assured products from feedstock to end product. Using this model, circular alternatives can be offered in a cost-effective and environmentally-conscious way, which can be scaled up quickly without compromising on quality or efficiency.

Borvida can be used for a wide range of different polymer and chemical applications, also beyond polyolefins (PO). Non-PO polymers, such as polycarbonates, acrylonitrile butadiene styrene (ABS), super absorbant polymer (SAP) and other chemicals, are utilised for various end applications including coatings, plasticizers, adhesives, automotive, electronics, lubricants, detergents, appliances and sports equipment.

Together with key strategic partners, including Neste and Covestro, Borealis strives to provide a long-term solution in order to allow value-chain partners to meet their sustainability goals. Borvida will enable our customers to increase the sustainability of their products, keeping them ahead of forthcoming legislative changes, and meeting their customers’ demands for climate-conscious products.

Introduced on a smaller scale in early 2020, early renewable base chemicals customers include Covestro. “The use of alternative sustainable raw materials is one important pillar of our strategic ambition to become fully circular”, comments Frank Dörner, Managing Director Covestro Procurement Services GmbH & Co. KG. “The new product line is a good example for joint solutions, another strategic pillar, in order to establish new and reliable supply chains creating benefits for our customers.”

Source:

Borealis

23.06.2022

Lectra announces the launch of its Automotive Cutting Room 4.0 offer

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 
The Automotive Cutting Room 4.0 offer is a set of solutions connected to one other: Vector, the fabric cutting equipment offering the best performance in the market; Empower, a new generation of digital services to leverage Vector's capabilities; Valia, the heart of the new offer, a software for preparing and scheduling production; and Algopex, an application for exploiting and capitalizing on all the data generated by the cutting room, so you can make the best decisions as quickly as possible.
 
Connecting up all the elements of the Automotive Cutting Room 4.0 offer delivers this unprecedented value and enables an unparalleled level of performance to be achieved. Nicolas Favreau, Lectra’s Automotive Marketing Strategy Director, explains: “When the whole cutting room process is digitalized, the data generated are centralized and accessible in real time, helping our customers to make the best decisions at every step of the production process. The benefits are huge. For example, the key performance indicators from the offer’s first users show productivity gains of around 5% and a reduction in material consumption of nearly 2%. That’s unheard of! These results, combined with the agility that the Automotive Cutting Room 4.0 brings and the complete process control, demonstrate the offer’s maximum relevance.”

Source:

Lectra 

23.06.2022

C&S acquires Texo S.R.L.

C&S strengthens its position in the luxury segment with the acquisition of Texo S.R.L., a company based in Cagli (Pesaro and Urbino) with 10 years of experience in the production of fashion apparel for Texo and for third parties.

C&S enriches the offer of its Style Services Luxe division, the research and production solution for any kind of style needs, together with Style Services Denim and along with C&S Experience projects, initiatives in direct contact with retail such as the haikure brand and the license agreements for Europe for Jeckerson and Purple. C&S’s history begins over 40 years ago in Trestina, in the Perugia province, and is rooted in denim culture and in the limitless potential that comes with this fabric. The company has begun to establish itself as a partner for the creation of jackets, shirts, outerwear, and denim. Its know-how expresses the combination of the production souls that characterize its territory of origin, between Umbria and Marche: all the typical tradition of premium denim mixed with the culture of luxury apparel, intimately dedicated to beauty, quality, and attention to detail.

C&S strengthens its position in the luxury segment with the acquisition of Texo S.R.L., a company based in Cagli (Pesaro and Urbino) with 10 years of experience in the production of fashion apparel for Texo and for third parties.

C&S enriches the offer of its Style Services Luxe division, the research and production solution for any kind of style needs, together with Style Services Denim and along with C&S Experience projects, initiatives in direct contact with retail such as the haikure brand and the license agreements for Europe for Jeckerson and Purple. C&S’s history begins over 40 years ago in Trestina, in the Perugia province, and is rooted in denim culture and in the limitless potential that comes with this fabric. The company has begun to establish itself as a partner for the creation of jackets, shirts, outerwear, and denim. Its know-how expresses the combination of the production souls that characterize its territory of origin, between Umbria and Marche: all the typical tradition of premium denim mixed with the culture of luxury apparel, intimately dedicated to beauty, quality, and attention to detail.

“We are proud to have achieved this new milestone” states Federico Corneli, C&S’s main shareholder. “We firmly believe that the added value that Texo S.R.L.’s specialization brings to the table will allow us to grow further and to be able to accelerate the strategic path that will lead us to establish ourselves as special partner for the most important luxury brands”.

More information:
C&S Denim Italy
Source:

C&S / Menabò Group srl

(c) Matthias Leo / Hochschule Augsburg
21.06.2022

Recycling Atelier in Augsburg eröffnet

  • ITA Augsburg und Hochschule Augsburg setzen Modellfabrik zum nachhaltigen Stoffkreislauf im Rahmen des KI-Produktionsnetzwerks Augsburg um

Nur ein Prozent der Textilien wird aktuell im weltweiten Stoffkreislauf recycelt. Schnelllebige Modetrends, die ausgelagerte Unternehmensverantwortung und eine allgemein sinkende Rohstoffqualität befeuern diese Entwicklung. Das Recycling Atelier, das die Hochschule Augsburg und das Institut für Textiltechnik Augsburg (ITA Augsburg) eröffnet haben, stellt sich diesem Trend entgegen.

Das Recycling Atelier ist die erste Modellfabrik, die sich in Forschung und Entwicklung gemeinsam mit Partnern aus der Industrie dem nachhaltigen Stoffkreislauf entlang der kompletten textilen Produktionskette widmet.

  • ITA Augsburg und Hochschule Augsburg setzen Modellfabrik zum nachhaltigen Stoffkreislauf im Rahmen des KI-Produktionsnetzwerks Augsburg um

Nur ein Prozent der Textilien wird aktuell im weltweiten Stoffkreislauf recycelt. Schnelllebige Modetrends, die ausgelagerte Unternehmensverantwortung und eine allgemein sinkende Rohstoffqualität befeuern diese Entwicklung. Das Recycling Atelier, das die Hochschule Augsburg und das Institut für Textiltechnik Augsburg (ITA Augsburg) eröffnet haben, stellt sich diesem Trend entgegen.

Das Recycling Atelier ist die erste Modellfabrik, die sich in Forschung und Entwicklung gemeinsam mit Partnern aus der Industrie dem nachhaltigen Stoffkreislauf entlang der kompletten textilen Produktionskette widmet.

Das Recycling Atelier bietet als erste Modellfabrik ein weltweit bisher einzigartiges Konzept für ein ganzheitliches Recycling von Textilien an. Die Wissenschaftler:innen von ITA und Hochschule forschen dort an sämtlichen Prozessschritten des Textilrecyclings: von der Materialanalyse, über die Sortierung, die Aufbereitung und die textile Verarbeitung, bis hin zur Produktgestaltung. Sie betreiben die Prozesse zunächst modellhaft mit dem Fokus auf einer sinnhaften Produktion, bevor dann die Skalierung auf einen industriellen Produktionsmaßstab erfolgt.

Die Schwerpunkte des Recycling Ateliers liegen auf der Entwicklung neuer Produkte und Prozesse für textile Sekundärrohstoffe und der Erarbeitung von Konzepten für das vollständige Verwerten von Alttextilien mit bestmöglicher Qualität sowohl durch integriertes und hochwertiges Recycling als auch durch kreislauforientiertes Produktdesign. Die Ergebnisse münden letztendlich im industriellen Einsatz von Recyclingkonzepten und schlagen die Brücke hin zu aktuellen Geschäftsmodellen.

Bei jedem Prozessschritt unterstützen Unternehmen aus der gesamten Wertschöpfungskette die Forschung und bringen die industrielle Sichtweise und Kompetenz ein. In einem großen Workshop-Areal bietet das Recycling Atelier in Kooperation mit internationalen Unternehmen die Möglichkeit, die Produkte der Firmen auf den Prüfstand zu stellen und im direkten Austausch neue Konzepte für eine nachhaltige Textilproduktion zu erarbeiten.

Der Augenmerk liegt vor allem auf dem Bereich der Digitalisierung: Durch eine hochwertige und moderne Erfassung, Aufbereitung und Auswertung von Daten sollen neue Produktionsprozesse ermöglicht werden. Dabei wird der Einsatz von Künstlicher Intelligenz im Bereich des maschinellen Lernens und der Neuronalen Netze für die Textilbranche erforscht.

Das Recycling Atelier ist ein Beitrag der Hochschule Augsburg und des ITA Augsburg zum KI-Produktionsnetzwerk Augsburg. Das KI-Produktionsnetzwerk Augsburg, eingerichtet von der Bayerischen Landesregierung, ist ein Verbund von zahlreichen KI-Kompetenzträgern im Großraum Augsburg. Verbundpartner sind die Universität Augsburg, das Fraunhofer-Institut für Gießerei-, Composite- und Verarbeitungstechnik IGCV, das Zentrum für Leichtbauproduktionstechnologie (ZLP) des Deutschen Zentrums für Luft- und Raumfahrt (DLR) in Augsburg sowie die Hochschule Augsburg. Beteiligt sind zudem auch regionale Industriepartner. Ziel ist eine gemeinsame Erforschung KI-basierter Produktionstechnologien an der Schnittstelle zwischen Werkstoffen, Fertigungstechnologien, datenbasierter Modellierung und digitalen Geschäftsmodellen.

Source:

Hochschule Augsburg/ITA Augsburg

17.06.2022

"Lifting Tariffs Would Cement China’s Dominance of Global Manufacturing"

Textile Groups Urge U.S. to Maintain Penalty Tariffs on Finished Products

The Biden administration should maintain Section 301 penalty tariffs on finished textiles and apparel or risk reversing once-in-a-lifetime nearshoring trends and undermining critical investments and jobs in the U.S. and Western Hemisphere, three key American textile manufacturing groups said today.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations expressed strong support for the continuation of penalty tariffs on imports from China and warned of the consequences associated with removing the tariffs.

“A key aspect of [the Biden administration’s trade] policy is the need to maintain Section 301 tariffs, absent substantive improvements in China’s pervasive, predatory trade practices,” the groups said. Lifting the tariffs “would also do nothing to achieve the administration’s goal of easing inflationary pressures, as apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs,” they noted.

Textile Groups Urge U.S. to Maintain Penalty Tariffs on Finished Products

The Biden administration should maintain Section 301 penalty tariffs on finished textiles and apparel or risk reversing once-in-a-lifetime nearshoring trends and undermining critical investments and jobs in the U.S. and Western Hemisphere, three key American textile manufacturing groups said today.

In a formal submission to the U.S. Trade Representative’s (USTR) office, which is conducting a four-year statutory review of the tariffs, the associations expressed strong support for the continuation of penalty tariffs on imports from China and warned of the consequences associated with removing the tariffs.

“A key aspect of [the Biden administration’s trade] policy is the need to maintain Section 301 tariffs, absent substantive improvements in China’s pervasive, predatory trade practices,” the groups said. Lifting the tariffs “would also do nothing to achieve the administration’s goal of easing inflationary pressures, as apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs,” they noted.

The submission was filed by the National Council of Textile Organizations (NCTO) and the Narrow Fabrics Institute (NFI) and Industrial Fabrics Institute (USIFI) – both divisions of the Advanced Textiles Association (ATA).  The associations represent the entirety of the U.S. textile production chain.

“For decades, China’s illegal actions have undermined virtually every domestic manufacturing sector and contributed to the direct loss of millions of U.S. jobs. These devastating state-sponsored practices include intellectual property theft as well as pervasive state-ownership of manufacturing, industrial subsidies, and abhorrent labor and human rights abuses in the Xinjiang region,” they noted. “Cancelling these tariffs would create further unhealthy dependence on Chinese supply chains and embolden future systematic trade abuses as bad actors know that the U.S. will not hold them accountable.”

The tariffs were imposed on China beginning in 2018 in response to China’s continuing IP and related trade violations. China has since failed to comply with an agreement it reached with the United States in 2020.

More information:
NCTO Tariffs China
Source:

NCTO

15.06.2022

Autoneum updates its outlook for 2022 as a result of the Ukraine war

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

In addition, renewed coronavirus-related lockdowns in China are delaying growth in Asia. According to the revised market forecasts1), global automobile production is expected to reach 80.4 million units in 2022, which represents an increase of 4.1% compared to 2021. Growth will thus be significantly lower than was still expected in mid-February.

Autoneum will do its utmost to minimize the impact on the Group. Despite the present challenges, the strategy will continue to be consistently implemented with a focus on innovative and sustainable technologies for growing markets of the future.

Based on current developments and knowledge, Autoneum has updated the forecasts that it presented at the Media Conference, which had not yet included the impacts of the war as outlined above. Autoneum continues to expect revenue to develop in line with the market. For the first half of the year, the Company expects an EBIT margin at break-even level. On the basis of the ongoing collaborative discussions with customers to participate in the sharing of the sharply increased energy and material costs, Autoneum anticipates an improvement in the EBIT margin to 2.0 to 3.0% (previously: 4.0 to 5.0%) for the full year 2022. Free cash flow for 2022 is expected to be in the mid to high double-digit million range.

Autoneum is very well positioned for the transformation of the automotive industry towards e-mobility and sustainability. Our product portfolio is suitable for all drive types, whether internal combustion, hybrid or pure electric vehicles. The medium-term forecasts that Autoneum published in November 2021 remain unchanged positive. The timing of the market recovery will be delayed by current events and will also depend on further geopolitical developments.

Source:

Autoneum Management AG