From the Sector

Textiles are a given in civil engineering: they stabilize water protection dams, prevent runoff containing pollutants from landfills, facilitate the revegetation of slopes at risk of erosion, and even make asphalt layers of roads thinner. Until now, textiles made of highly resistant synthetic fibers have been used for this purpose, which have a very long lifetime. For some applications, however, it would not only be sufficient but even desirable for the auxiliary textile to degrade in the soil when it has done its job. Environmentally friendly natural fibers, on the other hand, often decompose too quickly. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are developing a bio-based protective coating that extends their service life.

Depending on humidity and temperature, natural fiber materials can degrade in the soil in a matter of months or even a few days. In order to significantly extend the degradation time and make them suitable for geotextiles, the Denkendorf team researches a protective coating. This coating, based on lignin, is itself biodegradable and does not generate microplastics in the soil. Lignin is indeed biodegradable, but this degradation takes a very long time in nature.

Together with cellulose, Lignin forms the building materials for wood and is the "glue" in wood that holds this composite material together. In paper production, usually only the cellulose is used, so lignin is produced in large quantities as a waste material. So-called kraft lignin remains as a fusible material. Textile production can deal well with thermoplastic materials. All in all, this is a good prerequisite for taking a closer look at lignin as a protective coating for geotextiles.

Lignin is brittle by nature. Therefore, it is necessary to blend the kraft lignin with softer biomaterials. These new biopolymer compounds of brittle kraft lignin and softer biopolymers were applied to yarns and textile surfaces in the research project via adapted coating systems. For this purpose, for example, cotton yarns were coated with lignin at different application rates and evaluated. Biodegradation testing was carried out using soil burial tests both in a climatic chamber with temperature and humidity defined precisely according to the standard and outdoors under real environmental conditions. With positive results: the service life of textiles made of natural fibers can be extended by many factors with a lignin coating: The thicker the protective coating, the longer the protection lasts. In the outdoor tests, the lignin coating was still completely intact even after about 160 days of burial.

Textile materials coated with lignin enable sustainable applications. For example, they have an adjustable and sufficiently long service life for certain geotextile applications. In addition, they are still biodegradable and can replace previously used synthetic materials in some applications, such as revegetation of trench and stream banks.

Thus, lignin-coated textiles have the potential to significantly reduce the carbon footprint: They reduce dependence on petroleum-based products and avoid the formation of microplastics in the soil.

Further research is needed to establish lignin, which was previously a waste material, as a new valuable material in industrial manufacturing processes in the textile industry.

The research work was supported by the Baden-Württemberg Ministry of Food, Rural Areas and Consumer Protection as part of the Baden-Württemberg State Strategy for a Sustainable Bioeconomy.

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023 will focus on critical industry themes. The transformation of the textile and fashion industry relies on three key pillars: the creation of different circular business models matching growth with sustainability, a green and digital transition where information technology is necessary to deliver sustainability, and scaling the business, as how start-ups can make a leap and big companies can evolve their growth strategies. These three themes will be discussed in depth during the event.

The speaker lineup, drawn from Finland, Europe and beyond, demonstrates the expertise connecting on this platform. Noteworthy figures include Tiina Alahuhta-Kasko, President & CEO of Marimekko; Kai Mykkänen, Minister of Climate and the Environment of Finland; Marcus Hartmann, Head of Public Affairs & Sustainability at H&M; Liljana K. Forssten, Range Strategist at IKEA; and Virginijus Sinkevičius, European Commissioner (on video).

Lectra, a leader in technology solutions for the fashion, automotive and furniture industries, will be listed in the CAC Mid 60 and SBF 120 indices of Euronext as of market close on September 15, 2023. This listing will enhance the visibility of the group with potential shareholders and customers in France and internationally.

Founded 50 years ago, the Lectra Group offers software, connected cutting equipment, data analysis solutions and associated services to players in the fashion, automotive and furniture industries to accelerate their digital transformation and transition to Industry 4.0. In 2017, the company initiated its Lectra 4.0 strategy, with the ambition of becoming an indispensable player in Industry 4.0 worldwide by 2030.

For Daniel Harari, Chairman and Chief Executive Officer of Lectra: “Lectra's entry into the CAC Mid 60 and SBF 120 indices is an outstanding recognition of the successful actions we have taken over the past few years to ensure the profitable growth of our company and the success of our customers. We have changed dimension, notably with the acquisition of our historical competitor, Gerber Technology in June 2021. We have expanded our customer base, launched new cloud-based offerings which have enabled us to significantly increase the volume of SaaS software in our revenues, and offered new Customer Success Management services to support our customers. We have also made Corporate Social Responsibility (CSR) one of the pillars of our strategy.”

Hosted in Boston, Massachusetts on 27 September, Global Fashion Summit convened hundreds of esteemed representatives from brands, retailers, NGOs, policy, manufacturers, and innovators to transform ambition into action. The Summit was presented by Global Fashion Agenda (GFA), the non-profit organisation that is accelerating the transition to a net positive fashion industry, and marked the first edition of Global Fashion Summit in North America since the forum’s launch in 2009 as a side-event to COP15 in Copenhagen.
 
The Boston edition further explored Global Fashion Agenda’s 2023 editorial theme, ‘Ambition to Action’, while reflecting on and responding to what happened at Global Fashion Summit: Copenhagen Edition in June. By bringing Global Fashion Summit to Boston – a renowned hub for technology, innovation, and education - the Summit presented a deeper exploration of the global challenges, differences, and opportunities towards a more sustainable value chain. The Innovation Forum is a key pillar of GFA’s work, making Boston an apt location to showcase pioneering industry solution providers.
 
Attendees heard from over 40 speakers from a range of companies and organisations such as Levi Strauss & Co., Tapestry, Neiman Marcus Group, Thunder Voice Hat, H&M Group, Alice and Olivia, BBC StoryWorks, New Standard Institute, Conservation International, Worldly, Trove, Ceres, Aditya Birla Fashion and Retail Ltd, and many more. This Summit also featured esteemed Indigenous speakers on the programme. View all speakers.
 
The Summit’s second international edition facilitated inspiring thought leadership and exchanges around key themes including: Policy, Finance, and Retail, while also complementing the core priorities of the Fashion CEO Agenda: Respectful and Secure Work Environments, Better Wage Systems, Resource Stewardship, Smart Material Choices, and Circular Systems. The programme featured bold panels, case studies, and leadership roundtables reflecting on topics including: ‘Indigenous Leadership Perspectives’, ‘Exploring Fashion’s ESG Concept’, ‘On The Ground: Adaptation or Mitigation?’, ‘The Global Approach to Circularity’, and ‘Innovation for Value Chain Challenges’.

Global Fashion Summit: Boston Edition also presented an Innovation Forum, enabling small and large companies to meet with 14 sustainable solution providers from across the value chain– equipping them with the concrete tools to expedite meaningful actions. GFS Connect facilitated over 90 connections between fashion companies and exhibitors during the Summit.

ISKO provided their latest innovation in material science to British designers, Priya Ahluwalia, Masha Popova, Chet Lo and Aaron Esh, for the London Fashion Week SS24 season.

Alongside supplying their latest denim fabrics, ISKO opened its doors to its London-based product development centre, Creative Room London, for finishing and washing of their final designs as well providing expertise and knowledge in denim design and construction.

Priya Ahluwalia
For Ahluwalia’s Spring Summer 24 collection, entitled Acknowledgements, Creative Director and founder Priya Ahluwalia’s research led her on a journey of creative rediscovery.
ISKO’s Ctrl+Z fabric, which is made entirely from recycled and regenerated fibres, was used to create the flower motif denim showcase within 3 looks across jeans and jackets. This development contains no virgin cotton and uses a minimum of 60% recycled materials and the remainder is regenerated cellulose fibres while still giving a look and feel identical to traditional denim and speaks to Ahluwalia’s ongoing commitment to sustainable design and business practices.

Chet Lo
This season, Chet Lo took an active stand in reclaiming the power lost during his youth, healing the childhood wounds inflicted by a society that sidelined differences instead of celebrating them.
ISKO’s Ctrl+Z fabric and specialist lasering techniques from ISKO’s Creative Room was used across three looks featuring signature Chet Lo erotic laser prints across denim bottoms.

Aaron Esh
The SS24 season marked the brand’s debut at London Fashion Week, a homecoming of sorts for Esh, who was born and raised in the heart of the British capital, studied at Central Saint Martins and became a finalist at the LVMH Prize earlier this year. The early impulses of Aaron Esh remain steadfast: clothes that combine establishment rigour with the rebellious spirit of youth culture, devotedly crafted for a generation who feels somewhere in-between.
Aaron created bootleg denim ripped jeans made entirely from ISKO Denim using R-TWO50 fabric, which comprises a minimum of 50% pre and post-consumer recycled content. The designer noted the addition of denim accompanied by leathers add a new level of depth to their latest collection.

Masha Popova
Masha Popova’s sophomore catwalk outing, MONSTER was a “seasonless” offering that combines Autumn Winter 2023 and Spring Summer 2024.
Masha continued her obsession with denim manipulation, using various finishings including over-dyeing, flocking, patchwork, scratching and fraying in a variety of colours from vibrant green to silver across jeans, tops and jackets, all developed with the help of ISKO’s Creative Room, London.

The continued weak development of the markets relevant to Lenzing, coupled with very cautious market expectations in 2023, requires a reassessment of Lenzing AG’s macroeconomic environment.

Taking into account the current lack of market recovery, the previous earnings forecast is not expected to be achieved. The Lenzing Group is therefore adjusting its forecast for earnings development and is assuming EBITDA in a range of EUR 270 mn to EUR 330 mn for the 2023 financial year.

CEO Stephan Sielaff: “The recovery expected for the second half of the year in the markets relevant to us has not yet occurred. This makes the early measures we took all the more correct. We launched an ambitious cost reduction program back in November 2022, which delivered the expected results ahead of schedule. Building on this, we are implementing a holistic and consistent value creation program with a focus on measures to strengthen profitability and cash flow generation and to exploit the growth potential in the fiber markets through targeted sales activities.”

The Lenzing Group will announce further details about the value creation program when it publishes its quarterly results on November 3, 2023.

Santoni Shanghai Knitting Machinery Co., Ltd. announced the strategic acquisition of Terrot GmbH, a manufacturer of circular knitting machines based in Chemnitz, Germany. The move comes as the latest development in Santoni Shanghai’s long-term vision to build an ecosystem that aims to reshape and consolidate the circular knitting industry. The transaction will be finalized pending approval from Chinese regulatory authorities.

The global circular knitting machine market is expected to see significant growth in the coming years, with a July 2023 report from Consegic Business Intelligence forecasting a 5.7% CAGR from 2023 to 2030, propelled by an increasing consumer preference for breathable and comfortable knitted fabrics as well as increasingly diversification of demand for knitted apparel. To seize this market opportunity, Santoni Shanghai has developed an ambitious strategic plan centered around innovation, sustainability and digitalization. The new partnership with Terrot aims to further this strategy by enhancing Santoni’s integrated and scaled-up ecosystem, while also driving the sustainable development of the global knitting machinery industry.

“With the strategic investment of Santoni, we aim to strengthen our position as the preferred solution provider to many of the world’s leading textile manufacturers and top brands as well as continue working with industry talents as we provide valuable and essential know-how to drive premium ‘Made in Germany’ textile machinery.” said Robert Czajkowski, Managing Director of Terrot GmbH. "We have found a strong, globally active partner with clear dedication to quality, performance and excellent expertise in all circular knitting segments, who understands the unique value proposition and potentials of our portfolio and with whom we can realize our growth objectives” he added.

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

• Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
• Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

On Thursday, September 7th, at 12:30, in the Veneto Region's room at the Hotel Excelsior on Lido, Elena Donazzan, Councilor for Education, Training, Employment, and Equal Opportunities, will present the project alongside its creators Laura Scarpa and Lorenzo Cinotti of Venezia da Vivere, designer Tiziano Guardini, artist Jacopo Ascari, and actress Margot Sikabonyi.

"We conceived A Dress For Venice for Homo Faber in 2019, to celebrate Venice's 1600 years of craftsmanship," explains Laura Scarpa. "This year, the research extends to sustainable innovation thanks to an international team of designers, artisans and companies," continues Lorenzo Cinotti.

The project reaffirms Venice's role as an international laboratory to reflect on the planet's future. "A Dress For Venice" is a limited-edition collection realized with the support of a network of companies identified by the Tavolo Veneto della Moda (Confartigianato, CNA, Confindustria, Confesercenti and Confcommercio of Veneto), the global platform C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy), the partnership of Camera Buyer Italia and the media partnership of The Italian Rêve.

The presentation of the collection to buyers will take place at the Marina Guidi showroom in mid-September, while it will have its dedicated exhibition on Friday, October 20th, during the Venice Fashion Week.

"A Dress for Venice" is endorsed by the Comune di Venezia, the Regione del Veneto, and Homo Faber - Fondazione Cologni dei Mestieri d’Arte, which promotes worldwide high craftsmanship and savoir-faire.

Partners in the project Infinity srl and Tessitura Grisotto, renowned Italian textile manufacturers who expertly craft Bemberg™ fiber into exquisite fabrics. Creazioni Digitali, a specialized company in sublimation digital printing, carries out the prints on Bemberg™ textiles with its unique project GreenDrop; with inks that reduces the water consumption.

Other partners include Marina Iremonger, Camera Buyer Italia, and the Tavolo Veneto della Moda, representing Confartigianato, CNA, Confindustria, Confcommercio, and Confesercenti.

The international OEKO-TEX® Association, offering collaborative solutions for partners in the textile and leather industry, has once again recorded positive business development. Overall, OEKO-TEX® issued more than 43,000 certificates and labels between July 1, 2022, and June 30, 2023 - an increase of 21% compared to the previous financial year. The MADE IN GREEN product label recorded the strongest growth of 52%. OEKO-TEX® continues to drive urgently needed change through cooperation and joint action - with their services and at the organizational level.

For their two new certifications, OEKO-TEX® focused on cooperation with numerous parties along the global supply chain. Launched in November 2022, OEKO-TEX® RESPONSIBLE BUSINESS addresses the increasing global expectations and due diligence requirements. The tool and certification supports textile and leather companies in preventing negative effects from their own business operations, supply chains and broader business relationships. Companies working with OEKO-TEX® ORGANIC COTTON benefit from a global network of certified companies to facilitate sourcing of chemicals, materials and business partners - from cultivation to finished product.

At the organisational level, OEKO-TEX® is focusing on partnerships with multi-stakeholder initiatives to include as many different perspectives as possible and allow all parties to benefit. Working with ZDHC to promote sustainable chemical management and becoming an ISEAL community member are just two of many collaborations for OEKO-TEX®, which is striving to address the industry's most pressing challenges.

Meanwhile, the Association’s core business advances. For example, based on industry developments and scientific findings, OEKO-TEX® issued a general ban on the use of per- and polyfluorinated alkyl substances (PFAS/PFC) in textiles, leather and shoes certified by STANDARD 100, ORGANIC COTTON, LEATHER STANDARD and ECO PASSPORT. OEKO-TEX® also surpassed the milestone of 1,000 STeP certified production facilities. OEKO-TEX® is in a strong position to continue its work - enabling the industry and consumers to make more responsible decisions through partnership and education.

• Revenue of US$4B, a decline of 1% QoQ and 27% YoY
• Reported EBITDA of US$321M, an increase of 7% QoQ and decrease of 68% YOY
• Operating cash flows of US$491M
• Net Operating Debt to Equity of 0.95x
• Reported EPS of THB 0.04

Indorama Ventures Public Company Limited (IVL) reported marginally improved quarterly earnings as the company’s inherent advantages and continued focus on improving competitiveness helped bolster its business amid a continued weak operating environment.

Indorama Ventures achieved Reported EBITDA of $321 million in 2Q23, an increase of 7% QoQ and a decline of 68% YoY. Sales volumes remained resilient, rising 4% QoQ, amid continued destocking in the global chemicals industry from its peak in 4Q last year. Management is taking steps to conserve cash and safeguard the company’s competitive advantages as the global industry is impacted by increased capacity and lower margins with China boosting exports to offset muted domestic demand. Measures include redoubling efforts to reduce working capital and capex targeting $500 million of cash savings this year, optimizing the company’s European manufacturing footprint, and continued focus on Project Olympus, digitalization, and organizational enhancement.

Volumes are expected to improve in the second half of the year, with all three of Indorama Ventures’ business segments benefiting from the management measures and a gradual improvement in the outlook for the industry. Combined PET, the company’s largest segment, posted Reported EBITDA of $194 million, a 37% increase QoQ as destocking eased in most markets and supported stable volumes. Sales volumes are expected to grow in the second half of the year as manufacturing is optimized in Europe and expansion projects ramp up in India.

Fibers segment achieved Reported EBITDA of $20 million, a decrease of 37% QoQ, impacted by lower margins in the Lifestyle vertical and weak demand for Hygiene products in Europe. Volumes are expected to improve as manufacturing in Europe is optimized and expansion projects come online in the U.S and India. Mobility fibers volumes will see improvement in line with increasing automotive demand. Integrated Oxides and Derivatives (IOD) segment posted a 27% decline in QoQ Reported EBITDA to $94 million amid destocking in Crop Solutions market. Volumes will continue to be supported by reducing levels of destocking in the downstream portfolio.