From the Sector

At ITMA 2023, XORELLA, a specialist in steam setting and conditioning equipment for yarns and fabrics, will launch XO AUTOMATION for the double door XO SELECT conditioning machine series, and XO SOLID, a new machine series to complement XO SMART, XO TREND and XO SELECT machines.

XO AUTOMATION
The new XO AUTOMATION system consists of roller conveyor systems for loading and unloading two-door XO Select conditioning machines. Additional pallet wrapping machine with a turntable, weighting station, label printer, safety fence and security system can complete the system. The XO Select controller and automation system can handle and store individual customer-specific material and packing programmes.  

XO SELECT and XO AUTOMATION are designed for yarn steaming on multiple pallet dimensions and heights up to 2,650mm. The linear material flow passing conveyor and steaming machine avoids any mix between steamed and un-steamed materials. XO AUTOMATION fills the gap between the XO automated moving platform and the fully automated transport system – from spinning hall to warehouse.

XO SOLID
The new cubical XO SOLID combines a high loading space of 1,800mm x 1,700mm x 4, 000mm (H x W x L) through double row pin trolleys or pallets for easy manual loading of six units on floor level without a pit or platform. XO SOLID is therefore designed for installations on upper floor levels. The new frame design combines all necessary components factory preinstalled on a single frame, for easy ‘plug and play’ installation at the customer site. Additional smaller steamer dimensions for two and four loading units are also at the planning stage.

The new XO SOLID incorporates all the renowned features of XORELLA machines based on the long term experience in high temperature dyeing vessel production of FONG’s, including:

• A Siemens controller with OPC UA interface and XO data tool for batch storage.
• A XO EcoPac waterless claw pump or two-stage water ring vacuum pump.
• A high energy efficient accumulator for steam, electric and combined heating.
• Vessel and piping in world-class stainless steel.
• European key components such as pumps, heating elements, valves and sensors

Established in Switzerland in 1967, XORELLA became known in the global textile industry for its innovative indirect steaming system. Since 2002 the company has been a member of the CHTC Fong’s International Group, and a member of SINOMACH Group (China National Machinery Industry Corporation) since 2019.

Stahl announces that its near-term greenhouse gas (GHG) emissions reduction targets have been validated by the Science Based Targets initiative (SBTi). Stahl is one of the few coatings companies to receive this validation. To date, 145 companies in the chemicals sector have submitted an emissions reduction target to the SBTi, of which 61 have had their targets validated.

Stahl’s science-based targets, which reflect the company’s commitment to the 2015 Paris Agreement goals, are:  

• Stahl Holdings B.V. commits to reduce absolute scope 1 & 2 GHG emissions 42.0% by CY2030 from a CY2021 base year.*
• Stahl Holdings B.V. commits to reduce absolute scope 3 GHG emissions 25.0% by CY2030 from a CY2021 base year.

The SBTi classifies emissions reduction targets according to two potential temperature pathways: 1) limiting global temperature rises to 1.5°C above pre-industrial levels, and 2) limiting temperature rises to well below 2°C. The SBTi has determined that Stahl’s Scope 1 and 2 target is in line with a 1.5°C trajectory, while Stahl’s Scope 3 target has been validated in line with the well-below 2°C pathway.

Maarten Heijbroek, CEO of Stahl: “The validation of our Scope 1, 2, and 3 emissions reduction targets by the SBTi is an important milestone on our ESG journey as we strive to limit our contribution to global warming, in line with the Paris Agreement. Our targets are ambitious, and rightly so. Realizing our goal to help create a more responsible coatings value chain starts with being accountable for our own environmental impact, and taking concrete steps to reduce our emissions wherever possible.”

A clear strategy to reduce GHG emissions
Stahl’s approach to realizing its near-term emissions reduction targets is outlined in the company’s Environmental, Social, and Governance (ESG) Roadmap to 2030. This strategy defines the specific metrics against which progress on the company’s ESG commitments will be measured.

Stahl’s Scope 1 and 2 GHG emissions reduction targets, as submitted to the SBTi, cover emissions from all manufacturing sites where Stahl products are produced, as well as the company’s largest non-manufacturing locations. Stahl aims to lower these emissions by reducing its overall energy consumption and increasing the use of renewable energy at its sites. To achieve this, the company plans to increase its self-generated electricity capacity (using solar power, for example) and continue investing in more energy-efficient equipment.

Stahl plans to reduce its Scope 3 upstream emissions primarily by replacing fossil-based raw materials in its products with renewable alternatives, such as bio-based and recycled-based feedstocks. In addition, the company plans to introduce more low-impact raw materials into its product design.

* The target boundary includes biogenic land-related emissions and removals from bioenergy feedstocks.

At ITMA 2023 in Milan from June 8-14 this year, Monforts is organising two free-to-attend seminars and discussions on the potential of green hydrogen as a new energy source for textile finishing, drying and related processes.

Monforts is currently leading a consortium of industrial partners and universities in the three-year WasserSTOFF project, launched in November 2022, that is exploring all aspects of this exciting and fast-rising new industrial energy option.
The target of the government-funded project is to establish to what extent hydrogen can be used in the future as an alternative heating source for textile finishing processes. This will first involve tests on laboratory equipment together with associated partners and the results will then be transferred to a stenter frame at the Monforts Advanced Technology Center (ATC).

To be considered “green”, hydrogen must be produced using a zero-carbon process that is powered by renewable energy sources such as wind or solar. Currently, the cleanest method of hydrogen production is electrolysis, using an electrically-powered electrolyzer to separate water molecules into hydrogen and oxygen. The purity of the hydrogen is also important, and impurities must be removed via a separation process.

“Despite all its advantages, there are obstacles to overcome on the way to widespread, economically-feasible green hydrogen use,” explains Monforts Textile Technologies Engineer Jonas Beisel. “Until there are widely available, reliable and economical sources of this clean power, the cost of producing it will remain prohibitive. The infrastructure is not yet there, and hydrogen also has a tendency to make steel brittle and subject to fracture, which is something that requires further investigation in both its transportation and use in industrial processing.
“Green energy’s potential as a clean fuel source is tremendous, but there is much we need to explore when considering its use in the textile finishing processes carried out globally on our industry-leading Montex stenter dryers and other machines.”

At its Advanced Technology Center (ATC) in Mönchengladbach, Monforts will be carrying out intensive tests and trials to assess the reliability of both processes and final products when different natural gas and hydrogen mixtures – up to 100% green hydrogen – are employed. The results will be closely analysed by the consortium partners because there are many parameters that at this stage remain unknown.

The aim, Beisel adds, is to both reduce CO₂ emissions and – following the rising prices and industry turbulence experienced by manufacturers over the past year or so – to further reduce a dependency on natural gas.

The three-year WasserSTOFF project is sponsored by Germany’s Federal Ministry for Economic Affairs and Climate Action, and with Monforts at the helm brings together industrial partners Pleva and NTB Nova Textil, with academic input from the Hochschule Niederrhein and the Technical University of Freiberg.

adidas has announced a new milestone in its journey towards replacing virgin polyester with recycled polyester . 96% of all polyester used in adidas products is now recycled polyester. The achievement of the ambition that adidas first set in 2017 – to replace all virgin polyester with recycled wherever possible by the end of 2024 – is on track to be achieved earlier than expected.

Since the first adidas high-performance shoe was made with recycled materials in 2015, the brand has been working towards reducing its dependency on virgin polyester. Last year it announced that in 2021, more than 90% of the polyester used in adidas products was recycled, which – if it had been virgin polyester - would have accounted for 390 thousand metric tons of CO₂e – the equivalent to the greenhouse gas emissions generated to provide power to 50 thousand homes in the US^[1].

According to Textile Exchange^[2], global recycled polyester fiber production volume increased in 2021, but still accounts for just 14.8% of all global polyester production.

Sport is about meeting challenges head-on and finding ways to overcome those – material innovation is no different. For the team at adidas, the road to 96% has been long and full of challenges. The confirmation of its polyester commitment in 2017 was a crucial step in helping to initiate a transformation across adidas and its entire supply chain. This transformation has been made possible through creating technical solutions and imagining new possibilities that previously didn’t exist.

To accompany the announcement, adidas has created a short film about its new ‘PB’, featuring star athlete Jazmin Sawyers. The film highlights the sports brand’s pride in making progress, and its determination to push further.

As the brand looks ahead to 2024 and beyond, it will continue to expand its focus beyond recycled polyester. It will be doing this through three main areas of focus: changing materials by testing and scaling new raw materials, rethinking entire processes to design products that have a circular end-of-life solution, and reducing its carbon footprint.

^[1] adidas Footprint Analytics team
^[2] Textile Exchange Preferred Fiber & Materials Market Report, October 2021, https://textileexchange.org/app/uploads/2022/10/Textile-Exchange_PFMR_2022.pdf

Avgol®, a manufacturer of high-performance nonwoven fabric solutions, will use this month’s INDEXTM exhibition in Switzerland to showcase how it has a laser focus on delivering against sustainability objectives to safeguard the future.

Together with its sister companies from Indorama Ventures Limited (‘IVL’), Avgol will be presenting biotransformation capable fibers, spunbond, meltblown and SMS for diversified end-use markets at the event. Avgol will present and be available to discuss with visitors how this developing technology and the company’s other related products can help businesses achieve their 2030 sustainability goals.

Avgol will also highlight the latest solutions since recently announcing its collaboration with Algaeing™. Avgol uses patented algae bio-based formulations for colorants in its products, combining a unique environmental solution for modifying the aesthetic qualities of materials with Avgol’s ongoing commitment to sustainable polyolefin based spunbond and meltblown fabrics.

Alchemie Technology is the latest company to join the British Textile Machinery Association (BTMA), as all of the organisation’s members gear up to showcase an array of new innovations at ITMA 2023 in Milan from June 8-14 this year.

Cambridge-headquartered Alchemie is the inventor of two technologies – EndeavourTM and NovaraTM.

The Endeavour digital dyeing system produces no wastewater and reduces water consumption by up to 95% compared to traditional dyeing. The virtually waterless process delivers dyed fabric with high colour consistency and colour fastness and does not require post dyeing washing steps which leads to an energy reduction up to 85%. It can deliver any colour shade required and enables on-demand digital colour changeovers in any run length, from a few metres to several kilometres.

Similar energy savings can be achieved with the Novara precision finishing system which utilises a nozzle array to deliver finishing chemistry with millimetre resolution. Finishing chemistries penetrate deeply into the fabric due to the combination of high velocity liquid jetting and precisely-controlled vacuum and textile finishes are applied only where needed, reducing chemistry usage and enabling multi-functionality.

In the past year, Alchemie, backed by Swedish fashion giant H&M, has established a first demonstration hub at customer JSRTEX in Taiwan. It is now progressing plans to set up further centres at customer sites around the world.

• TreeToTextile sustainable textile fibre demo plant in Sweden

TreeToTextile, owned by H&M Group, Inter IKEA Group, Stora Enso, and LSCS Invest, invested €35 million in constructing a textile fiber process technology demonstration plant in Sweden. AFRY supported TreeToTextile throughout the project in the development and implementation phases from 2016-2022. The demonstration plant is now in the start-up phase.

TreeToTextile is offering a new technology to produce bio-based textile fibers with a low environmental footprint and aims to make sustainable textile fibers available to all. The new fiber is a regenerated cellulosic fiber, produced from renewable and sustainably sourced raw materials from forests. TreeToTextile has invested €35 million in developing and constructing a new demonstration plant in Nymölla, Sweden. This investment is a crucial step prior to the scale-up and commercialization of this technology.

AFRY has been the leading consultant and engineering partner of TreeToTextile from its early stages of project development in 2016, continuing onto demo plant implementation engineering from 2020-2022 In the project development phase, AFRY’s assignment included several pre-feasibility and feasibility studies, process design, up-scaling evaluations, and supplier pilot runs planning. In the demo plant implementation phase, AFRY was responsible for the engineering, project management and site services, also providing many additional services like permit and procurement support as well as machine and IT solutions.

“AFRY and TreeToTextile have a long-lasting, mutually developing relationship that we hope to continue. Together with AFRY, we have overcome the challenges through close collaboration, flexibility, broad competence and most important of all, mutual commitment”, says Olli Ylä-Jarkko, CTO at TreeToTextile.

The commissioning of the demonstration plant started in the summer of 2022, and the project was handed over to TreeToTextile for start-up and further optimization of the process.

“I’m proud of the deep and long-lasting cooperation with TreeToTextile. This project shows AFRY’s ability and wide competence to meet various demands of customer investment projects – from early phase development to implementation. AFRY’s long experience with bio-based materials, combined with our extensive process industry and project execution experience, makes us a unique partner for industrial clients in accelerating their bio-based fibers to scalable commercial production”, says Lisa Vedin, Head of Process Industries Sweden at AFRY.

Carbios announces its membership of the Ellen MacArthur Foundation’s Network. Carbios shares the Foundation’s commitment to accelerate the transition to a circular economy, especially in the areas of plastics and fashion. By joining the Ellen MacArthur Foundation’s Network, Carbios will connect with other leaders within the Foundation’s leading circular economy network of businesses, policymakers, academia, innovators, and thought leaders worldwide.

Carbios fully adheres to Ellen MacArthur Foundation’s vision for a circular economy for plastic. Its biorecycling and biodegradation technologies already match the actions defined by the Foundation:

• Eliminate all problematic and unnecessary plastic items
• Innovate to ensure that the plastics we do need are reusable, recyclable, or compostable
• Circulate all the plastic items we use to keep them in the economy and out of the environment

Through ambitious collaborative projects, plastics and fashion are two topic areas for the Foundation and are also at the heart of Carbios’ activities. Providing actionable solutions to support brands’ ambitious commitments for sustainable packaging and textile industries, Carbios has founded two consortiums: one in the packaging industry established with L’Oréal in 2019, which has since been joined by Nestlé Waters, PepsiCo and Suntory Beverage & Food Europe; another created in 2022 in the textile industry with apparel and fashion brands On, Patagonia, PUMA, PVH Corp. and Salomon. Together, the consortium members develop solutions promoting the recyclability and circularity of their products.

Joining the Ellen MacArthur Foundation’s Network takes Carbios’ circular economy actions one step further. Carbios recently underscored its commitment to circularity and environmental responsibilities by publishing its first Sustainability Report at the end of 2022^[1]. In 2019, Carbios’ biorecycling and biodegradable solutions were among the first innovations to be labelled “Efficient Solution” by the Solar Impulse Foundation^[2].

^[1] Cf. press release dated 15 December 2022
^[2] The Solar Impulse Foundation has identified over a thousand clean and profitable solutions that are economically viable and can be implemented on a large scale.

• Sales of CHF 890.3 million in second half-year 2022
• EBIT margin of around 2% expected for full year 2022
• Order intake of CHF 1 157.3 million in 2022; order backlog of around CHF 1 540 million as of December 31, 2022
• Preparations for ITMA 2023 on schedule
• Implementation of action plan to increase sales and profitability ongoing
• Rieter site sales process on schedule

For Rieter, in addition to the geopolitical uncertainties, the 2022 financial year was characterized by three main challenges:
Due to the rapid rise in inflation, the exceptionally high order backlog of around CHF 1 840 million at the beginning of 2022 was processed at significantly higher costs. It was only possible to offset these higher costs in part by means of price increases and other remedial measures.

In order to safeguard deliveries, it was necessary to compensate for serious material bottlenecks, particularly in electronic components, which resulted in considerable additional development expenditure.

Major expenses were also incurred in connection with the acquired businesses (Accotex, Temco and Winder).

Sales
The realization of sales from the exceptionally high order backlog developed better than expected. With sales of CHF 1 510.9 million, Rieter achieved an increase of 56% compared with the previous year (2021: CHF 969.2 million). In the second half of 2022, especially in the fourth quarter, the measures introduced to address material bottlenecks had a positive impact. Consequently, sales increased to CHF 890.3 million compared with the first six months (first half-year 2022: CHF 620.6 million).

EBIT margin
The trend in the EBIT margin was strongly influenced by substantial cost increases, which could only be offset in part through price increases and other remedial measures. In addition, to compensate for material shortages, expenses were incurred in connection with the development of alternative solutions and the acquired businesses.

Rieter succeeded in improving profitability compared with the first half of 2022 due to the higher sales volume and offsetting measures to compensate for increased costs, and expects a positive EBIT margin of around 2% for the full year 2022 (2021: 4.9%).

Order intake
In line with expectations, the order intake of CHF 1 157.3 million in 2022 was below the record year of 2021 (CHF 2 225.7 million). The market situation is characterized by investment restraint due to geopolitical uncertainties, higher financing costs and consumer reticence in important markets.

Order backlog
The company had an order backlog of around CHF 1 540 million at the end of 2022, which thus extends well into 2023 and 2024. In 2022, Rieter recorded order cancellations of less than 10% of the order backlog of CHF 1 840 million at the beginning of the year.

Preparations for ITMA 2023 on schedule
Rieter has continued to boost its innovative capability and, in order to further extend its technology leadership, will present new innovative solutions at ITMA 2023 in Milan.

Action plan to increase sales and profitability
Implementation of the action plan to increase sales and profitability is ongoing. With regard to the profitability of the order backlog, which remains high, the implemented price increases in combination with a favorable trend in costs, particularly in logistics, are having an impact. In addition, progress was made in eliminating material bottlenecks and reducing expenses for the three acquired businesses.

Rieter site sales process
The sales process for the remaining land at the Rieter site in Winterthur (Switzerland) is proceeding according to plan. In total, around 75 000 m² of land will be sold. The Rieter CAMPUS is not part of this transaction.

Results press conference 2023
Rieter will provide further details on the 2022 financial year and an outlook for the 2023 financial year on March 9, 2023.

• Carbios strengthens its Board of Directors with the appointments of Prof. Karine AUCLAIR, Sandrine CONSEILLER, Amandine DE SOUZA and Mateus SCHREINER GARCEZ LOPES
• Carbios has reached its CSR objective of 60% independent directors ahead of 2024 target date, and has increased its female representation

Carbios‘four new members to its Board of Directors:  Prof. Karine AUCLAIR, professor of Chemistry at McGill University, Sandrine CONSEILLER, former CEO of Aigle, Amandine DE SOUZA, General Manager of LE BHV MARAIS, Eataly and Home, DIY and Leisure Purchasing at Galeries Lafayette Group, and Mateus SCHREINER GARCEZ LOPES, Global Director for Energy Transition and Investments at Raizen, have all been appointed members of Carbios’ Board of Directors.  In the new structure, Prof. Karine AUCLAIR succeeds Jacqueline LECOURTIER, Sandrine CONSEILLER succeeds Jean FALGOUX, Amandine DE SOUZA succeeds Alain CHEVALLIER, and Mateus SCHREINER GARCEZ LOPES succeeds Jean-Claude LUMARET.

Three of the new members have strong, proven expertise in various industries covering fashion, retail and energy, as well as business development and senior executive management in high-growth markets and sectors around the world.  The new scientific expertise will also help enhance and advance Carbios’ research into biological solutions for the life cycle of plastics and textiles.  In addition, a sensitivity to CSR issues and proven results in this field was also a key selection factor to join the Board.  The new members’ combined strategic vision, solid industry experience and CSR commitments will support Carbios in its industrial and commercial plans.
 
Prof. Karine AUCLAIR is Professor of Chemistry at McGill University and holds the Tier 1 Canada Research Chair in Antimicrobials and Green Enzymes.  She has received numerous awards over the years, including the Clara Benson Award of the Canadian Society of Chemistry, the McGill Tomlinson Professorship, the Leo Yaffe Teaching Award, and the McGill Fessenden Professorship, to name a few. She is an internationally recognized bioorganic chemist with significant scientific contributions to the fields of antimicrobial resistance, biocatalysis and enzymology. Her research led to several patents notably in the clean enzymatic depolymerization of untreated, high crystallinity PET plastics for closed-loop recycling.  Her work has been published in nearly 100 peer-reviewed publications in high-impact journals, and often highlighted by the media.  As a recognized leader in her field, she is often invited to speak at industrial and academic conferences around the world, and to review theses and grant applications for worldwide institutions.
 
Sandrine CONSEILLER is former Chief Executive Officer of Aigle (the emblematic French brand committed to sustainable fashion).  Prior to joining Aigle, Sandrine was Group Marketing & Branding Executive Vice-President at Lacoste (another historic French fashion brand) from 2011 to 2015.  She contributed to the Lacoste maison turnaround with strong growth and numerous professional awards including several Cannes Lions Awards.  She was also Member of the Executive Board.  Sandrine began her career at Unilever and spent 20 years leading global businesses within various divisions, mainly in Personal Care, in Latin America, Europe, and Asia.  Sandrine is also Member of the Board of Phildar (the iconic French knitwear brand), Member of the Board of Raise Sherpa (the first philantropic endowment fund dedicated to start-ups) and is a funding partner of NEO FOUNDERS (a venture fund mentoring impact start-ups).
 
Amandine DE SOUZA is General Manager of LE BHV MARAIS (French retail, decoration and fashion department stores), Eataly (an Italian gastronomy concept franchise) and Home, DIY and Leisure Purchasing at Galeries Lafayette Group since 2018.  She has been a Member of its Executive Committee since 2020.  Amandine has 17 years’ experience in different types of companies of various sizes: from family business, to start-up,  and multinational.  She was General Manager for France at Westwing (an e-commerce start-up) from 2015 to 2018.  From 2009 to 2015, she was International Merchandise Director at Casino Group (food and non-food retail distribution).  Prior to this, she worked as a strategic consultant at Bain & Company within their Distribution and Consumer Goods Division in France and internationally.
 
Mateus SCHREINER GARCEZ LOPES is Global Director for Energy Transition and Investments at Raizen (global leader in bioenergy from Brazil), leading technology, new business development and intellectual property at the company.  He was previously Global Manager for Innovation and Business Development in Renewable Chemicals at Braskem (the largest producer of thermoplastic resins in the Americas and the world’s largest producer of biopolymers).  Before his transition to the corporate world, Mateus held several researcher and lecturer positions on Synthetic Biology and metabolic Engineering at Universities in Mexico, Germany, United States and Brazil.  He is also a Board Member of Iogen Energy Corporation, Vice-Chairman of the Board of the Brazilian Association of Bio Innovation, and Advisory Committee Member from the MIT Energy Initiative.