From the Sector

International technology group ANDRITZ has successfully started up the new velour loom it delivered to Foss Floors, Rome, United States (GA). The loom produces flooring from recycled plastic for a wide range of applications. Start-up took place in early 2023.

ANDRITZ is one of the global market leaders for supply of nonwoven production technologies, with a full range of needling technologies, including velour equipment, which allows customers to address a variety of applications such as automotive, household, flooring, acoustics, geotextiles, filtration, and synthetic leather.

Foss Floors is a leader in needlepunched felt products in North America. Its facilities are located in Rome and Chatsworth, Georgia, and it distributes a vast array of flooring products worldwide. One of the company’s key strengths is its agility for product diversification to satisfy customer needs. Foss Floors also strongly expresses its unwavering commitment to environmentally sustainable manufacturing.´

• Revenue grows to EUR 623.1 mn – fiber sales recovered over the course of the quarter
• EBITDA and net result for the period down compared with the first quarter of 2022
• Cost reduction program of more than EUR 70 mn being implemented according to plan
• Production of TENCEL™ brand modal fibers successfully launched in China
• Lenzing confirms guidance for 2023

The business performance of the Lenzing Group during the first quarter of 2023 largely reflected market trends. However, after the market environment had deteriorated significantly in the third and fourth quarters of the previous year, signs of recovery emerged during the first quarter in terms of demand as well as raw material and energy costs. Textile fibers recorded moderate but steadily improving demand. Business with fibers for nonwovens and with dissolving wood pulp performed better than expected. Raw material and energy costs were still at an elevated albeit decreasing level.

Outlook
The war in Ukraine and the more restrictive monetary policy pursued by many central banks in order to combat inflation are expected to continue to influence global economic activity. The IMF warns that risks remain elevated overall and forecasts growth of 2.8 and 3 percent for 2023 and 2024 respectively. The currency environment is expected to remain volatile in the regions relevant to Lenzing.

This market environment continues to weigh on the consumer climate and on sentiment in the industries relevant to Lenzing. However, the outlook has brightened somewhat recently.

Demand picked up tangibly after the Chinese New Year. As a consequence, capacity utilization improved and stocks were further reduced both at viscose producers and at downstream stages of the value chain.

In the trend-setting market for cotton, signs are emerging of a further buildup of stocks in the current 2022/23 crop season. Initial forecasts for 2023/24 anticipate a more balanced relationship between supply and demand.

However, despite signs of recovery in both demand and raw material and energy costs, earnings visibility remains limited overall.

Lenzing is fully on track with the implementation of the reorganization and cost reduction program. These and other measures are aimed at positioning Lenzing in the best possible way for the expected market recovery.

Structurally, Lenzing continues to anticipate growth in demand for environmentally responsible fibers for the textile and clothing industry as well as for the hygiene and medical sectors. As a consequence, Lenzing is very well positioned with its “Better Growth” strategy and plans to continue driving growth with specialty fibers as well as its sustainability goals, including the transformation from a linear to a circular economy model.

The successful implementation of the key projects in Thailand and Brazil as well as the investment projects in China and Indonesia will further strengthen Lenzing’s positioning in this respect.

Taking into account the aforementioned factors and assuming a further market recovery in the current financial year, the Lenzing Group continues to expect EBITDA in a range between EUR 320 mn and EUR 420 mn for 2023.

Around EUR 355 million in overall turnover, 350 extruders delivered creating an additional recycling capacity for 1.6 million tons of recycled pellets as a result - these are the figures with which the EREMA Group was able to close the 2022/23 financial year in March.

"With demand for recycled plastics remaining high, the past financial year brought many challenges that we needed to handle," says Manfred Hackl, CEO of EREMA Group GmbH. The challenges included persistent delays in the supply chain and unexpected supplier outages. Logistics and production processes had to be adapted several times as a result. The situation has improved significantly meantime as a result of these measures and more stable supply chains.

The production locations in Austria manufactured 270 extruders and delivered them to customers around the globe. Taking the whole group into consideration, this figure rises to 350 including the extruders from PLASMAC, the Italian subsidiary. The recycled pellet production capacity of all extrusion systems delivered in financial year 2022/23 adds up to around 1.6 million tonnes per year. On top of that there are around 130 additional components and modules such as filter systems and ReFresher anti-odour units.

Recycling innovations for high-quality pellets
K 2022 - the highlight trade fair of the past financial year - saw the EREMA Group launch seven
new recycling systems and components. These included the new INTAREMA® TVEplus® DuaFil® Compact recycling system and the EcoGentle® plasticising unit, which was also newly developed. Thanks to their gentle polymer treatment and significantly lower melt temperature, both extrusion innovations deliver effective advantages in terms of the quality of the melt, recycled pellets, and final product, as well as impressive energy efficiency in post consumer and PET recycling applications. The significance of these innovations for plastics recycling is underlined by the nomination of the DuaFil® Compact technology for one of this year's Plastics Recycling Awards Europe in the category Recycling Machinery Innovation of the Year.
The same applies to the READYMAC 1109 TVE machine made to stock by EREMA Group subsidiary UMAC, as well as to the new ALPHA XS edge trim recycling machine for the inhouse recycling segment made by PLASMAC. The market launch of the deinking system presented at K 2022 by the EREMA Group company KEYCYCLE delivering a throughput of 1,200 kilograms per hour has been a success, as has the commissioning of a further unit sold to a film manufacturer.

40 years of EREMA
The beginning of the new financial year falls almost to the day on EREMA's 40th anniversary. On 14 April 1983, Helmut Bacher, Helmuth Schulz and Georg Wendelin founded EREMA Engineering Recycling Maschinen und Anlagen GesmbH, laying the foundation for the 40-year success story. In celebration, the comapny will hold the event EREMA Discovery Day at the company headquarters on the 1st of June. This event with live insights into the latest post consumer and PET recycling technologies will also see the official opening of the newly built research and development centre.

adidas has announced a new milestone in its journey towards replacing virgin polyester with recycled polyester . 96% of all polyester used in adidas products is now recycled polyester. The achievement of the ambition that adidas first set in 2017 – to replace all virgin polyester with recycled wherever possible by the end of 2024 – is on track to be achieved earlier than expected.

Since the first adidas high-performance shoe was made with recycled materials in 2015, the brand has been working towards reducing its dependency on virgin polyester. Last year it announced that in 2021, more than 90% of the polyester used in adidas products was recycled, which – if it had been virgin polyester - would have accounted for 390 thousand metric tons of CO₂e – the equivalent to the greenhouse gas emissions generated to provide power to 50 thousand homes in the US^[1].

According to Textile Exchange^[2], global recycled polyester fiber production volume increased in 2021, but still accounts for just 14.8% of all global polyester production.

Sport is about meeting challenges head-on and finding ways to overcome those – material innovation is no different. For the team at adidas, the road to 96% has been long and full of challenges. The confirmation of its polyester commitment in 2017 was a crucial step in helping to initiate a transformation across adidas and its entire supply chain. This transformation has been made possible through creating technical solutions and imagining new possibilities that previously didn’t exist.

To accompany the announcement, adidas has created a short film about its new ‘PB’, featuring star athlete Jazmin Sawyers. The film highlights the sports brand’s pride in making progress, and its determination to push further.

As the brand looks ahead to 2024 and beyond, it will continue to expand its focus beyond recycled polyester. It will be doing this through three main areas of focus: changing materials by testing and scaling new raw materials, rethinking entire processes to design products that have a circular end-of-life solution, and reducing its carbon footprint.

^[1] adidas Footprint Analytics team
^[2] Textile Exchange Preferred Fiber & Materials Market Report, October 2021, https://textileexchange.org/app/uploads/2022/10/Textile-Exchange_PFMR_2022.pdf

DyStar announces the plan to restructure its Ludwigshafen facility located in Germany. The strategic decision is made by the company in response to changing business conditions and market shifts.

Mr. Xu Yalin, Managing Director, and President of DyStar Group said, “This is an important strategic move for DyStar. We will focus on developing key emerging markets, which have been shifting over a decade. In the wake of higher energy costs and inflation, DyStar is determined to further improve cost efficiency and drive sustainable productivity as we continue to deliver the highest quality of innovative products that support the global supply chain.”

Mr. Eric Hopmann, Chief Commercial Officer of DyStar Group said, “The restructuring of this facility will be carried out in a phased manner. DyStar will diversify the production activity out of Europe and start with the reduction of manpower as a consequence. DyStar’s customers can be further assured of undisrupted supply, hence their production should not be affected as we will work closely to meet their specific requirements.”

The facility has been an integral part of DyStar’s global network. DyStar inherited this facility from their founders who started the Indigo research and manufacturing more than 125 years ago.

Freudenberg Performance Materials (Freudenberg) announces the launch of sustainable carpet backing products for the flooring industry. Sustainable backings support customers in their transition towards producing more sustainable carpets. The range is introduced as Colback ECO and Lutradur ECO and is part of the Freudenberg portfolio of high-performance spunbond nonwoven technical textiles.

Reduced CO₂ footprint
Freudenberg follows a ‘less is more’ principle: the best raw materials are the materials that are not needed at all. For the ECO product range, Freudenberg R&D teams developed a solution to save raw materials in their carpet backings. Freudenberg redefined its proprietary yarn production technology allowing for extremely thin filaments with a diameter up to 30% smaller than the standard portfolio for carpet backings.  
The new thin yarn technology is one of Freudenberg’s sustainable initiatives benefitting the carpet industry. Other developments supporting sustainability include backings with a high recycled content and backings using alternative approaches to facilitate carpet recyclability. They will extend the ECO portfolio in the future.

ECO-CHECK-Label
The currently launched thin yarn ECO-backings have been awarded the ECO-CHECK label. Freudenberg introduced this label in early 2021 to identify particularly sustainable products within its portfolio.

Yanfeng has reached another milestone in its sustainability journey by bringing the power of solar energy to its plants in South Africa. The global automotive supplier already uses renewable energy at all its locations in Europe – some of which are already operating with 100% green energy – and now will supplement its operations in South Africa with sustainable and emission-free solar energy generation.

Many sectors are facing major challenges with the transition to a low-carbon economy. The automotive sector in particular faces many operational and economic challenges when transforming production plants into net-zero emission operations. Thanks to its commitment to sustainability, 100% of the solar energy generated by the PV systems is used to power Yanfeng’s production plants in South Africa, helping them save around 2,559 tons of CO2 annually while reducing their monthly costs and increasing efficiencies.

The solar energy systems were funded by SolarAfrica, which will also operate, maintain and monitor the systems going forward. “From the outset of these projects, Yanfeng’s focus was on reducing their CO2 emissions and SolarAfrica is proud to partner with them to make their journey towards sustainability a success,” said David McDonald, CEO of SolarAfrica. “It’s inspiring to see a global company like Yanfeng invest in world-class facilities in South Africa, contributing to our country’s green economy and supporting job creation in the automotive industry.”
 
All Yanfeng European plants were converted to renewable energy by the beginning of 2022. With this new PV system, Yanfeng has implemented a milestone in the conversion to net-zero emission production at its two plants in South Africa.

Groz-Beckert will be presenting the latest innovations from its product area Carding to visitors at INDEX™23

The InLine card clothing series for the nonwovens industry will take center stage at the Groz-Beckert exhibition booth. A new and patented manufacturing process made the development of the innovative metallic card clothing series possible. It offers customers improved process reliability and increased uptime of the card. At the same time, the new process enables environmentally friendly and resource-saving production.

In addition to a controlled and precise hardening of the teeth, the wires are characterized by a reduced rib height and a completely scale-free surface. An exhibit at the booth will demonstrate what distinguishes the new process from the conventional production method and will highlight the differences between the new Groz-Beckert InLine card clothing series and its predecessor generation.

The first special geometry of the Groz-Beckert InLine card clothing series to be developed was the SiroLock™ plus worker and doffer wire. It impresses with a more effective fiber take-up, control and transfer. Augmented reality will allow visitors to experience the functionality and operating principle behind SiroLock™ plus at INDEX™23.

From April 25^th to 27^th, 2023, the Institute of Textile Machinery and High Performance Material Technology (ITM) of TU Dresden will be exhibiting at the pavilion SAXONY! at JEC World 2023.

The ITM will provide a comprehensive overview of its current research in the field of machine and product development along the entire textile process chain.

The upcoming JEC 2023 exhibition will highlight innovative Customised Connective Cores (CCC), which are custom-made core-insert structures additively manufactured using cellular metal and a form-fit integrated insert. These CCCs can be seamless integrated either as patches or as full-surface core material into lightweight panels, offering significantly improved load-bearing behavior (especially 4 times the load-bearing capacity and fail-safe behavior) compared to existing technologies. This breakthrough opens up new possibilities for fastening lightweight panels.

Another highlight at the exhibition is the repair process for fibre-reinforced composites (FRP) developed at the ITM. Instead of mechanically grinding the damaged area, the matrix in the repair area is locally dissolved using a UV-rays-induced depolymerisation process. Damaged fibres can thus be replaced by a customized repair patch. Free yarn ends on the textile repair patches are spliced with the UV-exposed yarn ends in the repair area using an adapted splicing process. In this way, a very clean, simplified and mechanically improved repair area can be achieved compared to the state of the art.

The diverse possibilities offered by the structure and process simulation of textile high-performance materials and textile manufacturing processes will also be presented. By means of multi-scale modelling and simulation, a profound understanding of materials and processes is achieved at the ITM. Finite element models on the micro, meso and macro scale have been developed and validated for this purpose. Examples from current ITM research projects demonstrate the various possibilities and areas of application of modern simulation methods in the field of textile technology.

Moreover, an innovative process for the integral manufacturing of 3D rib-stiffened preforms with complexly arranged stiffeners in 0°, 90° and ± 45° orientation was developed and successfully implemented at the ITM. Due to the process-integrated structure fixation and the continuous fibre reinforcement between shell and rib structure, the 3D preforms are perfectly suited for the production of highly load-bearing FRP components with increased bending stiffness, which will be exhibited at JEC. Hence, the lightweight construction potential of high-performance fibres can be fully exploited.

A successfully established development are partially flowable 2D textile reinforcement fabrics that are continuously manufactured in one single process step. For this purpose, the entire process chain was developed at the ITM, which allows a cost-effective and high-volume production of load-bearing thermoplastic 3D FRP components with continuous fibre reinforcement between shell and stiffeners.

At JEC 2023, the ITM will also present a partially embedded textile latice girder as reinforcement for carbon concrete applications, which was produced by means of an innovative textile manufacturing process based on the multiaxial warp knitting technology. Through the development of a customized warp insertion, manipulation and take-off system as well as appropriate shaping methods, it is now possible to produce tailored textile semi-finished products, e.g. for use in wall and ceiling panels. These textile latice girders represent a resource-saving alternative to conventional steel girders due to the reduced among of concrete required and the additional cavity for media and cable guidance.

The integration of textile actuators and sensors in FRP provides structures with additional functionalities. The research and application of such interactive FRP with different matrix materials (e.g. with thermoset, elastomer or concrete matrix systems) for structural health monitoring or adaptive systems is one of the key research areas of the ITM.

Moreover, the development and implementation of innovative yarn constructions based on recycled high-performance fibres (e.g. rCF, rGF, rAR) for sustainable FRPs is successfully promoted at ITM. By use of a special carding machine, recycled fibres are opened up, separated and joined to form a wide, uniform ribbon. Subsequently, innovative hybrid yarn constructions made of evenly mixed recycled high-performance and thermoplastic fibres with variable fibre volume fractions can be manufactured by means of various spinning technologies. Selected yarn constructions and components will be showcased at JEC.

After the recent acquisition of Texo S.R.L. which has strengthened the company's presence in the luxury segment, C&S takes a further step forward in the creation of a widespread garment manufacturing hub in the heart of Italy. C&S takes ownership of the Seville brand together with the Bianchetti family, who remain co-owners covering mainly style research and development functions. The Italian style, which amounts to an aesthetic identity and a guarantee of artisan quality, a cultural orientation toward manufacturing excellence and product design, finally to an approach to the market characterized by availability, openness and interaction with the customer.

This acquisition strengthens C&S direct contact with retail, going alongside HAIKURE, PDF and other brands still being finalized, and will be able to generate a profitable exchange with the Style Services Luxe and Style Services Denim divisions, through which C&S stands out as an exceptional partner for all the brands that choose to rely on its experience in the world of jeans, luxury and formalwear.

High quality and Made in Italy trousers, but there is more, the brand Siviglia from the Marche region brings to C&S a wealth of tailoring skills and product construction. Born in Marotta (PU) in 2006 from the Bianchetti family, Siviglia is a reality that has experienced rapid commercial success since its entry into the market thanks to the intuition of the iconic trousers with fabric inserts at mid-thigh inspired by the Spanish horsemen, hence the name that recalls the Andalusian capital.

The success of Siviglia is built on coats, trousers and jeans characterized by fit and linear style, thanks to the continuous research on the product, on the fabrics and on the emerging trends, in a personal reinterpretation of the codes of elegance. The corporate style permeates not only the choice of materials and accessories, but is distinguished by the packaging components and the use of visual and communicative languages in line with the brand identity. By interpreting the contemporary and foreseeing the future needs of a constantly evolving market, Siviglia aims to provide its customers with the best in the broadest sense, including among its qualitative goals the reduction of the environmental impact of productions and materials used.