From the Sector

• ITA Master's graduate wins Hanns Voith Foundation Award 2023

In his Master's thesis, Flávio André Marter Diniz, a graduate of the Institut für Textiltechnik of RWTH Aachen University (ITA), developed ultra-thin polyethylene (PE) carbon fibres with a filament diameter 2-3 times smaller than usual. In addition, the use of PE-based precursors will make it possible to reduce the price of carbon fibres by 50 per cent in the future, thus opening up a wide range of other possible applications in key industries such as wind power, aerospace and automotive. For this groundbreaking development, Marter Diniz was awarded the Hanns Voith Prize with the Hanns Voith Foundation Award in the category "New Materials". The prize is endowed with € 5,000 in prize money.

Flávio André Marter Diniz won the prize in the category "New Materials" for his master thesis entitled "Investigation of the stabilisation and carbonisation process for the production of ultra-thin polyethylene-based carbon fibres".

The use of carbon fibres in highly stressed lightweight construction solutions, such as today's growth applications of wind turbines or pressure tanks, has become indispensable due to their excellent mechanical properties and low density. High manufacturing costs of conventional PAN precursor-based carbon fibres make the material very cost-intensive. In addition, it is not sufficiently available. New manufacturing approaches that develop alternative raw materials and manufacturing processes can be a key and growth engine for further industrial composites applications.

The aim of the work was to develop a new and cost-effective manufacturing process for high-quality ultra-thin carbon fibres using a polyethylene precursor. For this purpose, the sulphonisation process, which is time-consuming today, was to be significantly shortened. As a result, Mr. Marter Diniz produced novel ultra-thin polyethylenebased carbon fibres with a filament diameter < 3 μm with an excellent surface quality of the fibres without detectable structural defects. The fibre diameter is 2-3 times smaller than that of conventional PANbased CF. This provides the basis for mechanically high-quality material properties. At the same time, Mr. Marter Diniz was able to reduce the sulphonisation time by 25 percent. The developed material and technology set important milestones on the way to cheaper carbon fibres. With PE-based precursors, the price of CF can be reduced by 50 percent compared to conventional PAN-based CF.  

A total of five other young scientists were awarded in six categories (Drive Technology, Innovation & Technology/Artificial Intelligence, New Materials, Paper, Hydropower and Economic Sciences. This year, for the 10th time, the Hanns Voith Foundation awarded the Hanns Voith Prize to outstanding young scientists.

• Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

Organized by INDA, IDEA® also featured five essential nonwovens training classes; market presentations from China, Asia, Europe, North America and South America; industry recognitions with the IDEA® Achievement Awards and the IDEA® Lifetime Achievement Awards; and a welcome reception celebration.

Also, organized by INDA, FiltXPO™ featured five panels of global leaders in filtration and separation for the first-ever “Summit for Global Change,” discussing societal challenges such as indoor air quality, environmental sustainability, pandemic readiness, clean water, and filtration standards.  The event also featured a 1.5-day filter media training course, and sessions highlighting filter media market trends and filtration industry statistics.  

Exhibitors and attendees noted the welcome return to meeting face-to-face among industry senior leaders participating in the three-day event.

A highlight of IDEA® was the announcement of the IDEA® Achievement Awards by INDA, in partnership with Nonwovens Industry magazine. Moderated by Rousse and Karen McIntyre, Editor, Nonwovens Industry the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability, since the previous IDEA® Exposition in 2019.

In addition, INDA presented the IDEA® 2022 Lifetime Achievement Award to Val Hollingsworth, board chair and CEO of Hollingsworth & Vose, and Nonwovens Industry presented the IDEA® Entrepreneur Achievement Award to Doug Brown, president of Biax-Fiberfilm/5K Fibres at the event.

IDEA® 2022 Achievement Awards winners:

• IDEA®  Equipment Achievement Award – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics, Inc.
• IDEA®  Raw Material Achievement Award – ODOGard – Rem Brands, Inc.
• IDEA® Short-Life Product Achievement Award – LifeSavers Wipes – LifeSavers LLC
• IDEA® Long-Life Product Achievement Award – Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
• IDEA®  Sustainability Advancement Award – Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
• IDEA®  Nonwoven Product Achievement Award – HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
• IDEA®, the Preeminent Event for the Nonwovens & Engineered Fabrics Industry, will next be held on its new 24-month schedule on April 23-25, 2024 in Miami Beach, Florida.

Names of the IDEA® Achievement Award honorees pictured:

Row 1, Left to right:
IDEA® Long-Life Product Achievement Award winner, Jon Nichols, MANN + HUMMEL, GmbH and Dave Rousse – Nanofiber Cabin Air Filter – MANN + HUMMEL, GmbH
IDEA®  Nonwoven Product Achievement Award winners, Pramod Shanbhag, Suominen Corporation, Karen McIntyre, Nonwovens Industry Magazine, and Avinav Nandgaonkar, HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
Row 2, left to right:
IDEA® Short-Life Product Achievement Award winner, Georgia Crawford, LifeSavers Wipes – LifeSavers LLC, and Karen McIntyre, Nonwovens Industry Magazine
IDEA® 2022 Lifetime Achievement Award winner, Val Hollingsworth, Hollingsworth & Vose, and Dave Rousse, President, INDA
IDEA®  Equipment Achievement Award winners, Uwe Peregi, Dave Rousse, and Thomas Herrmann – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
Row 3, left to right:
IDEA®  Raw Material Achievement Award winner, David Schneider, ODOGard – Rem Brands, Inc. and Dave Rousse, INDA
IDEA®  Sustainability Advancement Award winner, Chris Astley, and Karen McIntyre Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
IDEA® Entrepreneur Achievement Award winner, Doug Brown, Biax-Fiberfilm / 5K Fibres

• Winners in Six Categories to be Announced at IDEA® 2022 in Miami Beach

Online voting for the prestigious IDEA® Achievement Awards representing the “best of the best” innovations in the global nonwovens and engineered fabrics industry in six categories will open on Feb. 28.

Industry professionals will have the opportunity to vote for the winners from the finalists and see award-winning achievements in person at IDEA® 2022, the World’s Preeminent Event for Nonwovens & Engineered Fabrics, March 28-31, at the Miami Beach Convention Center.

Presented by INDA, in partnership with Nonwovens Industry magazine, the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability. To vote on the Nonwovens Industry website, visit: https://www.nonwovens-industry.com/idea-reg-achievement-awards

In addition, INDA will unveil the IDEA® 2022 Lifetime Achievement Award honoree and Nonwovens Industry will announce the IDEA® Entrepreneur Achievement Award recipient at the event. 

All of the winners will be announced on March 30 at a ceremony at IDEA® from 9:30 a.m. to 10:30 a.m. moderated by Dave Rousse, President, INDA and Karen, McIntyre, Editor, Nonwovens Industry.

Finalists Named

The INDA Technical Advisory Board, consisting of technical professionals from member companies, has narrowed the competition from more than 100 online nominations to the following 18 finalists selected for their leading innovations since the last IDEA show in 2019.

Now, the industry will have the chance to select their top choices from the three finalists in each of the following six categories through the online voting process:

1-    IDEA® Equipment Achievement Award

ESC-8 – Curt G. Joa, Inc.
Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
Doffer Airlay Card – Technoplants SRL
 

2-    IDEA® Raw Material Achievement Award

sero™ premium hemp fiber – Bast Fibre Technologies Inc.
ODOGard – Rem Brands, Inc.
SharoWIPES™ – Sharon Laboratories
 

3-    IDEA® Short-Life Product Achievement Award

MDP™ – Dermasteel, Ltd.
Organic 2.0 – Ellepot A/S
LifeSavers Wipes – LifeSavers LLC
 

4-     IDEA® Long-Life Product Achievement Award

Canopy Hero Pro – Canopy
Long-Life Cellulose-based Nonwovens for Higher Performance in Reusable Baby Diapers – Kelheim Fibres GmbH and Sumo Diapers
Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
 

5-    IDEA® Sustainability Advancement Award

Pureflow8 – In Flight Material Separator – Diaper Recycling Technology Pte. Ltd.
Fitesa® 100 Percent BioBased Bico – Fitesa
Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
 

6-    IDEA® Nonwoven Product Achievement Award

Sontara® Silk – Glatfelter Corp.
HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
LS SAF™ Nonwoven Fabrics –Technical Absorbents
 

Moving forward after this year, the IDEA® Achievement Award will be presented every two years under the new cycle announced for the event with the subsequent IDEA® taking place April 23-25, 2024.

• Session "Recycling and Other Alternative Feedstocks"

Cellulose fibres are a true material miracle as they offer a steadily expanding, broad range of applications. Meanwhile markets are driven by technological developments and policy frameworks, especially bans and restrictions on plastics, as well as an increasing number of sustainability requirements. The  presentations will provide valuable information on the various use-opportunities for cellulosic fibres through a policy overview, a special session on sustainability, recycling and alternative feedstocks, as well as the latest developments in pulp, cellulosic fibres and yarns. In addition, examples of non-wovens,  packaging and composites will offer a look beyond the horizon of conventional application fields.

The fourth session, "Recycling and other alternative raw materials", will cover topics ranging from textile recycling - both cotton and regenerated cellulose fibres - to the use of hemp shives as raw material. Self-initiated cooperation and waste management pave the way to a fully closed European material loop where textile waste is collected, recycled and reprocessed into new raw materials.

The speakers will demonstrate the importance of cooperation in recycling fabrics already in circulation, perfectly following the topics and discussions of the previous conference day.

• Heikki Hassi - SciTech-Service (FI):  Textile Recycling and MMCFs; Systemic Challenges, Market Opportunities and Advancing Technologies
• Valerie Langer - Canopy (CA): The Perfect Storm – A Five Year Feedstock Shift Forecast
• Helena Claesson - Södra (SE): Two is better than one – Lenzing and Södra together Face the Challenge of Recycling of Textiles
• Marina Crnoja-Cosic - Kelheim Fibres (DE) and Harald Cavalli-Björkman - re:newcell (SE): Sustainable Cellulosic Fibres from Recycled Raw Materials – A Solution for Europe
• Frank Meister - Thüringisches Institut für Textil- und Kunststoff-Forschung (DE): Lyohemp Fibres Made of Dissolving Pulp Based on Hemp Shives
• Miguel Sanchis-Sebastiá - ShareTex (SE): Expanding Textile Recycling Beyond Cotton: Innovations to Recycle Regenerated Cellulose Fibers

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

• Bangladeshi supplier offers production capacity to produce face masks and PPE on a non-profit basis
• Reaching out to global agencies to build partnerships to help tackle COVID-19 crisis
• “Now is the time for our whole industry to stand together”

A leading Bangladeshi garment manufacturer is offering the manufacturing capacity of his world-class facility for the production of protective face masks and Personal Protective Equipment (PPE) on a non-profit basis to help tackle the COVID-19 global pandemic.

Denim Expert Limited Managing Director, Mostafiz Uddin, has reached out to the global community including brands & retailers, governments, embassies, donors, development agencies, global apparel associations and bodies in these unprecedented times.

Mr. Uddin is offering the capacity, skills and production expertise of his factory and wants to develop partnerships to meet much-needed short-term demand for masks and PPE in the battle against COVID-19.

Those willing to partner with him and wishing to utilize his production capacity would only be asked to provide fabrics and raw materials as well as meeting workers’ wages.

Berlin - 200 exhibitors, around 1,000 visitors and over 20 speakers from Germany and abroad – the ATSG textile fair premiered in Berlin from 11 to 13 September 2019 brought together exhibitors, speakers and trade visitors from all over the world. Jason Prescott, CEO of JP Communications, said he was satisfied with the event at the Estrel Conference Center: "The first step has been taken, now we will establish the ATSG as an important event of the Berlin fashion and textile world".

The ATSG was the first fair of its kind in Germany. "There are many fashion trade fairs for sale from wholesale to retail. Berlin has so far lacked an event for companies of all sizes, including micro-brands and small fashion labels," continues Jason Prescott. The exhibited product categories included fabrics, technical clothing, mixed and knitted fabrics, home textiles, leather, natural and synthetic fibres, readymade goods and fashion accessories. Visitors to major European fashion brands as well as small, independent brands from the Berlin fashion scene were able to take a close look at raw materials and finished garments and discuss their ideas personally with the exhibitors. In parallel, China Textile Brand Show (Berlin), sponsored by Chinese Ministry of Commerce (MOFCOM), made its debut bringing in more than 150 superb Chinese manufacturers with their best collections for Germany and EU market.

Opening Ceremony, Lectures and Fashion Show

The ATSG was opened by Chinese government representatives and international association delegates. More than 20 lectures on the three days provided the latest impulses for thought and discussion. In their lectures and panel discussions, speakers from all over the world presented current positions on topics such as "All China? Or is there more to it?", "Application examples of artificial intelligence in the fashion industry", "Optimal logistics concepts for Europe", or "The importance of sustainability in the European fashion industry".

Wilson Zhu, COO at Li & Fung, one of the world's largest trading houses based in Hong Kong, explained in his keynote speech his view on the digitization of global supply chains: "From raw materials in the textile factory to consumer tracking: In retail, every step of the value chain is determined by digitization.

Companies need to be close to consumers and their supply chains must enable a seamless flow of data and information from start to finish". Customers and their requirements have also changed: "They want to know about origin, recyclability and production standards and use their information to adjust their purchasing behavior accordingly.” Other speakers included Jeff Streader of the brand investment platform Go Global and Salman Khokhar of Brand Lab Kollective Moda. The fashion show on the second day featured creations by local Berlin labels (Damur, Danny Reinke, Aline Celi, Yoona Tech) as well as Asian brands exhibiting at ATSG.

Successful kick-off

Exhibition organiser Jason Prescott draws a positive balance: "Looking back on the three days, I am very proud of what went well. Which has been confirmed for us: We're on an exciting path, have taken our first steps here in Berlin and will continue to develop the exhibition." The creators of ATSG 2019 are taking ideas for the year 2020 with them, especially from the many intensive discussions with exhibitors and visitors: "The ATSG has offered visitors and exhibitors a unique opportunity to identify new growth strategies, look around for market partners, learn from each other and establish networks. We are very pleased that the concept was used here in Berlin," concludes Chase Vance, Director of JP Communications.

• Circularity at the centre

PG DENIM, the designer project by Paolo Gnutti, is ready for several important events scheduled for the autumn with ground-breaking interpretations and a new – increasingly green – business model. The occasion is its participation in the Blue Zone at Munich Fabric Start (Munich, 3-5 September 2019), a space which is increasingly often reserved for companies and projects with a high innovation rate in the world of denim.

PG DENIM at the German exhibition will be presenting important product innovations, but most notably new concepts developed for the S/S 2021 season. The focus here is on circularity, seen from a dual perspective: the product with the no longer traditional alternation of seasons, and a sustainabilityoriented approach.

Seasons meet

The new PG DENIM approach is geared towards overlapping seasonality, with less and less marked separations between projects dedicated to the spring-summer and fall-winter lines. The collections by PG DENIM can thus be increasingly defined as a “mix of products without seasonality”. Its focal points are innovation alongside the concept behind the initial idea, as opposed to just the season. This trend, explains Paolo Gnutti, CEO and R&D Head at PG DENIM, is also due to registering the fact that seasonality – in terms of environment and trends – is changing at an increasingly rapid pace. As a response to this situation, the choice has been made to design new collections starting from macro-trends and presenting fabrics for garments which are “easy to wear”, suitable for both warm and cold temperatures, in a true melting pot  of weights and sizes.

The lines for the previous season are thus reintroduced and restyled playing with weights and sizes, within a range where flock meets ultra-light fabric bases, or where vinyl is combined with typically summer weights which shift the fabric towards the world of “paper” with crispy touches, resulting in extraordinarily lightweight and strong items at the same time. Also the GARAGE DENIM has been upgraded with fluid and smoothed touched for garments which are easy to wear and have a strong personality.

Partnership with The Denim Window

The PG DENIM season is also enhanced by its partnership in The Denim Window project, which has resulted in a limited series of Creative Capsule Collections, derived from the idea of bringing together companies which had already worked or were working together, trying to highlight – through small capsule collections – the best of what had already been produced by traditional businesses. This has resulted  in three trailblazing capsules, two of which designed in partnership by PG DENIM and companies the likes of M&J Group, Cadica and Greenwear. Several copies of these collections have been made to travel the world, and – after the official presentation in July – they will have a special corner, The Denim Window, in the Bluezone at Munich Fabric Start.

The “Circular Programme” and the five “Rs” of sustainability

Also the PG DENIM approach to accountability in production processes has been enhanced by implementing the “Circular Programme”. As part of our corporate vision, Italian-style production is combined with compliance with what have become known as “the five Rs”, that is to say key concepts underlying the design and manufacturing model: Reduce (everything you are not using), Repair (everything you can), Reuse (anything available to you), Recycle (all that is left), Respect (everything around you).

This is the philosophy underlying each individual process at PG DENIM, and leading to new specific programmes which have been its business focus over the past few months:

1) Reducing the environmental impact during the fabric dyeing phase in reaction and sulphurbased processes, where the use of chemicals has been reduced by 40%, water consumption by 50% and CO2 emissions by 60%, which has also resulted in better penetration and a better result in the crocking process. This has led to producing 10 new articles which will be launched on the market.

2) Recycling all waste from processing and after use, creating a range of garments where cotton is actually obtained from regenerating these two kinds of waste. In this regard, PG DENIM for now is the only company on the market able to process with a percentage of recycled product exceeding 60% of the total, whereas the average for this kind of manufacturing is generally about 35%.

As regards regular production, on the other hand, PG DENIM follows stringent international standards, including Dtox, Reach and Gots in all its processing phases, also using BCI cottons and the Organic Cotton Standard for raw materials. Last but not least, it was recently awarded the GRS (Global Recycled Standard) certification.