From the Sector

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

The international home textiles industry has enjoyed a promising start at Heimtextil in Frankfurt am Main, which finished Friday, 11 January. The challenging economic situation and uncertainty in the retail sector were countered by a positive and confident mood at the world’s leading trade fair.

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’. [*For comparison, 2018: 2,975 exhibitors from 64 countries; 68,584 visitors from 135 countries, FKM-tested)]

3025 exhibitors from 65 countries* took the international trade fair for home and contract textiles to a 15-year high: ‘Exhibitors and visitors accepted the new trade fair concept with great enthusiasm and confirmed the trade fair’s position as the world’s most important meeting place for the industry. The quality of the decision-makers impressed the exhibitors, as did the number of new business contacts from 156 countries, especially international ones – thus enabling Heimtextil to set a new benchmark’, says Detlef Braun, Member of the Board of Management of Messe Frankfurt. ‘Around 67,500 visitors* ensured that there was a busy atmosphere in the halls, despite a slight decline due to various reasons, such as difficult travel conditions on account of the storms in the alpine region and airport strikes in Germany’.

One topic that occupied both exhibitors and visitors was the current and future economic situation. A further challenge is the increasingly evident changes that are happening in trade. Increasing revenues and revenue shares in online retailing stand in the way of the efforts made by the stationary retail trade to maintain their inner-city businesses. ‘The small business specialist trade, but also department stores and multibrand stores, and thus the heart of our visitor target groups, are under pressure from the constantly increasing levels of e-commerce. With Heimtextil and our consumer goods fairs in general, we offer these retailers in particular clear perspectives and diverse inspiration in an ambiguous world’, continues Braun.

Heimtextil made it easier for its visitors to access valuable inspiration and business momentum thanks to an optimised trade fair concept and the associated new hall structure. ‘The new concept brought more visitors to the stand’, was the feedback from Andreas Klenk, Managing Director of Saum & Viebahn from Kulmbach in Franconia about hall 8.0 which offered textiles editeurs and manufacturers of curtain and sun protection systems a common platform for the first time. ‘It was the right decision to merge the different segments. We had high quality discussions with respect to both export and domestic business, and are satisfied with the trade fair’.

As part of the new concept, Heimtextil expanded its unique product range across the entire exhibition site and also included the new hall 12, which has been an additional architectural highlight on the Frankfurt exhibition grounds since September.

Top international companies from the Bed & Bath Fashion segment presented their wares here. For the company Curt Bauer from Aue in Saxony, the première of the new hall was a successful one. ‘We're very enthusiastic about the new hall 12. The product range there was very well received. We are very satisfied with the quality of visitors to our stand. In addition to a good frequency of German visitors, we are particularly pleased about growth from China and Russia’, says Managing Director Michael Bauer.

Natural materials, PET and ocean plastics 
Heimtextil set a standard in terms of sustainability: after the first global climate protection agreement for the textile industry was signed by 40 leading fashion companies, organisations and associations at the World Climate Conference in Katowice last December, the focus in Frankfurt was also on environmental progress in the textile industry. Numerous exhibitors presented progressive solutions, for example in the recycling of PET bottles and ocean plastic as well as in the use of certified natural materials. ‘Sustainability was the theme for us at this year’s Heimtextil. Major media players visited us and the 'Green Tour’ guided tour stopped by. We presented many things, including our first vegan duvet and fair silk products, all 100 per cent produced in Austria’, says Denise Hartmann, Marketing Manager at Hefel Textil. The topics of water consumption in the textile industry and microplastics also increasingly came to the fore. The exhibitor directory ‘Green Directory’ alone contained around 150 progressive companies listing sustainably produced textiles. The offer was supplemented by its own lecture series as well as theme-specific tours, which provided valuable impetus and
underpinned the pioneering green position of the trade fair.

Sleep becomes new lifestyle theme
Heimtextil also focused on sleep as one of the upcoming lifestyle trends. While a balanced diet and sufficient exercise are now a natural part of a healthy lifestyle, restorative sleep is still neglected* although it is one of the most important building blocks for long-term physical and mental well-being. At Heimtextil, a number of new products and aspects came to the fore that help people become sensitised to and analyse their sleep behaviour and promote healthy sleep. Around the redesigned hall 11.0 and in the adjoining lecture area ‘Sleep! The Future Forum’, representatives from the national and international bed industry enjoyed attractive product presentations and superb speeches on the topics of sustainability, hospitality, sport and digital.

In addition to the renowned trend show, the trade fair also focused on contract business, particularly in the hotel and hospitality sector, as well as decorative and upholstery fabrics, digital printing solutions and wallpapers.

The next Heimtextil in Frankfurt am Main – its 50th edition – will take place from 7 to 10 January 2020.

*According to a forsa investigation commissioned by the Techniker Krankenkasse

• conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

Intertextile Shanghai Home Textiles has always been at the forefront of the China and Asia markets for participants to find the latest products from around the world and learn about the current market trends. This year, a series of fringe programme events together with some new show features will inspire fairgoers throughout the four-day fair.

New features for contract business

Given the growing demand for textile solutions for architecture, interior design and the hotel industry, the coming August fair will highlight leading contract upholstery suppliers with distinctive labels. In addition, the show will feature a showcase area at hall 5.1 which displays quality contract upholstery from exhibitors. The area will be decorated by interior designers, demonstrating the functionalities of different contract textile products.

To introduce the opportunities that the textile industry can capture from contract business, both domestic and international architects, hoteliers, interior designers and industry experts have been invited to share their insights about design, market, materials and project management on the Contract Business Days, on 28 & 29 August.

Naima A Khan, founder and interior designer from The Green Design in UAE, for instance, will be speaking on The Art of Sustainable Interior Design. She has worked with many international home fashion retail store developers, as well as textile and interior companies, and is experienced in using therapeutic colour schemes, sustainable materials and sunlight in different design projects. Another guest, Esra Lemmens, who is also a designer and active speaker at design events, will talk about the expanding importance of design throughout Dubai as well as her suggestions for doing business in Dubai.

Other speakers also include Martin Oliu from the international design company, Harmony World Consultant and Design (HWCD). He has participated in a broad area of design such as architectural construction & interior design and is responsible for various luxury residential and hotel design projects. Professor Thomas Charles, who has been working on industrial product design and research for user experience & consumer behaviour study, business strategy and branding designs will give a talk on ‘The Power of Innovative Design’. Trevira CS will also participate in the Contract Business Day through their Chinese representative, Jenny Zhang, who will share how the permanently flame retardant Trevira CS textiles can fit into contract business.

Digital printing and technics remain a focal point

The Digital Printing Micro Factory concept was first introduced in the 2017 edition of Intertextile Shanghai Home Textiles, and received much attention and positive feedback. To cater to the growing demand for efficient, one-step textile solutions, Global Fortune Limited from Hong Kong will work jointly with Kornit Digital and Bullmer to set up a Micro Factory at this August’s fair. An advanced digital printing system – Allegro & Cut by Kornit Allegro – will be introduced. The system streamlines the entire production process by combining printing and drying together so multiple machinery is not needed. It is also eco-friendly as one single ink set suits various fabric types, and designs will be printed in shapes and sizes that are ready for cutting. Visitors can learn more about the complete production process from printing and cutting to sewing via the onsite demonstration.

In addition to forums discussing how digital printing helps flexible production, there will also be an array of forums where some top domestic industry players will share their experience in resolving  technical problems in productions and satisfying requirements in different product tests.

Forward-looking events to ignite inspiration

The trend committee formed by international trendsetter the NellyRodiTM Agency has developed three themes, namely Caring Future, Crazy Future and Emo Future for the 2019 International Lifestyle Trends. Apart from the trend area where product displays are located, visitors can get a better understanding about the future living styles from the panel discussion and trend area tour. The agency’s creative director, Vincent Grégoire, will guide tours to explain the trend concept. He will also join other industry experts in the panel discussion on consumer lifestyle trends.

Another inspiring event during the show is the Future Talk in which representatives from different industries including fashion brand Shiatzy Chen, home appliance giant Haier, gourmets and lifestyle experts will share their perspectives on the future trends.

The show will be held from 27 – 30 August in the National Exhibition and Convention Center in Shanghai. Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

To find out more about this fair, please visit: www.intertextilehome.com.

Exhibitors from over 30 countries participating at Kenya's Biggest Int'l. Multi-Sector Trade Exhibition

The largest international trade exhibition in Africa for multi-sector products, equipment and machinery will take place at KICC, Nairobi, Kenya from 04 - 06 September with record breaking numbers. Exhibitors and trade visitors are said to increase by 27% and 24% respectively at the 21st edition of the Kenya International Trade Exhibition (KITE). The exhibition has grown in stature from its inception 22 years ago, as the key networking and sourcing platform for the industries. As the largest event of its kind, it ensures direct access to over 150 exhibitors from 30 countries and more than 12,000 trade visitors.

With an amazing array of products and services from all over the world, it gives visitors the opportunity to source cutting edge products and services as well as learn about and discuss the latest market trends. There is no other related trade exhibition in East Africa that delivers the same quality, quantity and variety of buyers and distributors.

Concentrating on some of the largest growth categories within the multi sector industry, Kenya International Trade Exhibition (KITE) 2018 has five distinct sub categories, namely: FOODAGRO, MEDEXPO, PPPEXPO & INDUSMACH which will cover the food, hotel & agricultural sectors, medical & pharmaceuticals, plastic, printing & packaging sector, the industrial and finally the consumer sector. Being centrally located, Kenya emerges as one of the largest importers in Africa. Kenya also has the largest economy in east Africa and is a regional financial and transportation hub.

As the leading home textiles trade event in Asia, Intertextile Shanghai Home Textiles is renowned for its size and also the variety of products offered by its exhibitors from China and around the world.

The show will be held from 27 – 30 August in the National Exhibition and Convention Center in Shanghai. It will cover six halls, accommodating over 1,000 suppliers from around 30 countries and regions.
To satisfy buyers from different regions with varied sourcing needs, the show will feature a wide variety of home textile products ranging from bedding, bath, table & kitchen, curtains & upholstery and textile designs & technology to editors, whole home, sun protection, wallcoverings and carpets & rugs.

“The products on offer are of various quality and price levels that visitors can discover both premium brands presented by editors and a massive amount of medium-end products at the show,” said Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd.

Intertextile Shanghai Home Textiles serves as an ideal platform for suppliers to introduce new products to the market as a large number of visitors including import & export corporations, wholesalers, distributors, chain stores and home product manufacturers are attracted.

EUROART and JAB ANSTOETZ are two of the returning editors who are ready to demonstrate their latest collections.
“We are an integrated company based in Beijing which presents both imported decorative fabrics and wallpaper as well as self-owned fabric brands. Buyers can expect to discover advanced jacquard, embroidery, silk and printing techniques from the brands LIZZO and ROMO at our booth,” Mr Frank Lu, General Manager of EUROART said.

Furthermore, the world-known fabrics design company, JAB ANSTOETZ, will also take advantage of the show to present their new outdoor fabrics.
“Our ‘AROUND THE WORLD’ collection possesses high colour stability, mould-resistance and easy-care features. We will also introduce our advanced FibreGuard fabrics which prevent dirt and meet OEKO-TEX® standards,” Mr William Lin from JAB ANSTOETZ said.

Bedding products are another highlight of the show. Returning exhibitor Advansa will display their new fibre formula SUPRELLE™ 95 which is a combination of enhanced sleep comfort and ease of care. And the established French brand TODAY will make their debut at the fair to promote their full range of fashionable bedding items.

Diverse suppliers confirm participation offering all kinds of quality products. Apart from the editors and whole-home exhibitors, worldwide suppliers specialising in different products can be found in the show.

They include:

• Curtains & upholstery: quality brands such as AICO, Ateja, Culp Fabrics, D’Décor, Elastron, Enzo Degli Angiuoni, Harmel Home, Huatex, Sangwontex and more
• Bedding, bath and kitchen: domestic and overseas brands will showcase an extensive range of products for everyday domestic life including comforters, pillows, mattress toppers, bed linen, bathrobes, towels, table napkins and more. Exhibitors will offer insights about utilising various products to display the whole home concept
• Textile design: featuring worldwide original textile design studios. Visitors can discover distinct styles of design from both Asian and European studios
• Carpets & rugs: carpet exhibitors from Afghanistan, India, Pakistan, Turkey and other countries
• Digital printing & technics: showcasing the latest digital printing technology, and cutting, sewing and other home textile equipment technics. In view of the good result in 2017, the show will continue to cooperate with industry media to organise professional seminars introducing some latest technique and new applications in the home textile industry

• New collaboration of sustainable viscose suppliers formed in China

Digital Printing Zone debuts at Spring Edition
Despite the economic ups and downs in China over the last few years, demand for premium European textiles remains high.
Whether it be premium wool for the flourishing suiting market, ladieswear fabrics, lace & embroidery for high-end domestic brands each with hundreds of stores across the country, innovative yarns & fabrics for the booming sports and activewear sectors, or original pattern designs for the thousands of new online fashion brands, European suppliers remain the go-to option for Chinese buyers looking for quality and style.

As one of the undisputed leaders in the European textile scene, Italy is always a good bellwether of the trends between Europe and China. After a less than stellar 2016, Italy’s fabric exports to the Mainland China and Hong Kong markets grew by 12.4% in the first 10 months of 2017[1]. The expected demand for European brands at Intertextile Shanghai Apparel Fabrics will be most evident in the SalonEurope zone, which features exhibitors from Austria, France, Germany, Italy, Spain, Switzerland, Turkey and the UK, as well as country pavilions & zones from France, Germany, Italy and Turkey.

There is also continuing demand for overseas expertise when it comes to more technical areas such as sustainability and digital printing, solutions to which can be found in the fair’s All About Sustainability area and Digital Printing Zone.

SalonEurope showcases the continent’s full textile expertise
The best of the best from Europe will be on display in this edition’s SalonEurope, with a range of products across the whole textile spectrum on offer. Some of the highlights this edition include:

• Alumo (Switzerland): celebrating its 100-year anniversary this July, Alumo has undertaken a complete refresh of their brand, highlighting the character of their mill in Appenzell, Switzerland that has deep roots in the local textile industry. This edition, they will showcase a renewed collection of luxury shirting fabrics with intricate designs and added functions such as natural stretch and wrinkle-free, and a newly enlarged, never-out-of-stock ‘Sartorial’ collection.
• Hatfil Tekstil Isletmeleri (Turkey): a Turkish-Italian joint venture, they offer a huge range of yarns including eco-friendly options such as organic, BCI and fair trade yarns, as well as cotton, Tencel, Amicor, bamboo, cashmere, modal and other varieties.
• Hohenstein Textile Testing (Germany): offering testing services, OEKO-TEX® services and certifications, the Hohenstein Quality Label and more.
• Ricamificio Paolo Italy SpA (Italy): an embroidery manufacturer, they have developed a new technique using very thin embroideries to produce a lace-like effect, which can also be customised to the customer’s requirements in no more than four weeks. They have also produced a quilt-like fabric suitable for spring / summer garments which is made from materials such as silk organdie, cotton yarn or lurex to produce a shiny effect.
• Teseo Tessitura Serica Di Olmeda SpA (Italy): for their summer 2019 collection, Teseo is inspired by the natural elements with increased attention to sustainability with GOTS-certified bio silk and eco-friendly yarns. New articles are lighter and enriched with yarn-dyes, include jacquard stripes and checks, gauze and devoré bands to add transparency, and more.

New collaboration of sustainable viscose suppliers formed in China
While the textile industry in China still has a long way to go in terms of sustainability, genuine progress is being made at both a government and company level. January of this year saw the implementation of a new environment protection tax, with companies charged for noise, air & water pollution and generating solid waste[2]. Replacing a pollutant discharge fee that had been in place for 40 years, the new tax is set by local governments – with some of the regions suffering from worse pollution setting higher rates – and also incentivises companies with lower emissions.

In another encouraging move, 10 leading global viscose producers in China have come together to form the Collaboration for Sustainable Development of Viscose (CV) to promote the sustainable sourcing and responsible production of viscose. These 10 producers collectively account for over 50% of the world’s viscose staple fibre production, and have partnered with two trade associations to adopt a sustainability roadmap for the viscose industry. Built around credible international sustainability standards and programmes, the CV Roadmap aims to provide guidance to viscose producers on sustainable sourcing and production practices.

The CV collaboration will make its debut appearance in the fair’s All About Sustainability zone, where visitors can learn more about this initiative, as well as sustainable developments in the Chinese textile industry. Apart from an educational programme and garment display area, the zone will also feature a number of exhibitors other than CV.

Digital Printing Zone debuts at Spring Edition
While digital printing is rapidly gaining traction in the global textile industry, this is especially so in China due to its potential to reduce pollution during the production process. Amongst the exhibitors looking to take advantage of this in the fair’s new Digital Printing Zone is MS Italy, a market leader in the design, development and distribution of innovative digital ink-jet printing systems and associated consumables, which serves the high-end, roll-to-roll textile printing and specialty material markets. Also exhibiting is DIGITEX which will introduce the latest digital- and inkjet-printed natural and manmade fabrics.

Apart from digital printing exhibitors, a day-long forum will inform fairgoers on the exciting possibilities of digital printing. Held on day 2 of the fair, the Fast Fashion and Digital Printing Application Forum features sessions on fast fashion technology & trends and digital printing applications. These are followed by a series of discussions on topics such as flexible supply chains, business opportunities created by digital printing and IP protection. The forum also includes a presentation on the findings of a six-month study conducted by Fashion Print, a Chinese publication, for which they visited hundreds of textile companies, printing and dyeing enterprises, as well as their suppliers to produce a research paper on the digital textile printing market and technology.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

• Intertextile Shanghai Apparel Fabrics – Spring Edition 2018 is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. For more details on this fair, please visit: www.intertextileapparel.com. To find out more about all Messe Frankfurt textile fairs worldwide, please visit: www.texpertise-network.com.

[1] http://hk.fashionnetwork.com/news/Italian-textile-industry-back-on-growth-track-in-2017,944760.html
[2] http://www.fibre2fashion.com/news/textile-news/china-imposes-environment-protection-tax-beginning-jan-1-239965-newsdetails.html

Overseas exhibitors found the fair an effective platform to open up the Asian market
Buyers benefited from wide range of quality exhibitors

The 23rd edition of Intertextile Shanghai Home Textiles is over, with both exhibitors and buyers satisfied with the business outcomes resulting from the fair’s four days. The largest home textiles trading event in Asia was held from 23 – 26 August, attracting 1,106 exhibitors from 30 countries and regions. Given the strengthening market conditions in China the fair maintained its popularity, with the number of trade buyers increasing to 38,964 from 99 countries and regions (2016: 37,779 from 98 countries and regions). The show also attracted more international buyers this edition, with a 16% increase in those coming from abroad. “Intertextile Shanghai Home Textiles has once again proven its leading position in Asia as a business and order platform for the industry. There was a noticeable positivity from both exhibitors and buyers this edition regarding the current and future situation of the domestic market, so we are optimistic about the industry for the next year,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd said.

Overseas exhibitors found the fair an effective platform to open up the Asian market

As the leading event of its kind in the region, the fair successfully attracts a number of Chinese and Asian buyers every year, ensuring suppliers can develop their business further in the region. This year, seven country and region pavilions including Belgium, India, Korea, Morocco, Pakistan, Taiwan and Turkey were formed, with exhibitors from all of satisfied they could meet their target buyers.

While being in the minority at the fair, European brands still managed to catch the attention of visitors due to strong interest in their products from Asia. The Italian upholstery supplier Enzo Degli Angiuoni Spa was satisfied with the number of Asian buyers, particularly Chinese, that they met at the fair. Mr Stefano Laurenzano, Export Area Manager expressed: “A lot of visitors that saw us here last year have come back again and are serious about cooperating with us. Here you can get a lot of new contacts and discover the Asian market. We’ve had mainly Chinese buyers, but have had more Asian buyers from South Korea, India, Malaysia and elsewhere to visit us this year. We are seeing more business here in recent years.”

Being a newcomer to the fair, Iceland Duvet ehf felt the potential in China. “We’ve had enough buyers including retailers and manufacturers visiting our booth to make our participation worthwhile. The interest from the buyers has been genuine. Being a European brand helps more than at fairs in Europe as we can stand out more here,” Mr Ragnar Ludvik Runarsson, representative said.

Indian exhibitor, Paramount Textile Mills Ltd has been joining the fair for three years. “Apart from meeting our existing customers, we’ve had enquiries from potential new customers from China as well as overseas including the US and South America,” Mr Ram. M., Director of Marketing & Finance said.

Also with three years’ participation, Mr Samir Tazi, General Manager of PIF Textile Emotions from Morocco affirmed the show’s effectiveness in meeting important buyers and decision makers. “It’s easier for us to meet them here compared with some smaller European fairs. Thanks to Intertextile Shanghai, we have also met the major players in China.” Talking about this year’s result, he continued: “We were very busy. We met with more people than any other fairs. There are a lot of new buyers and also returning buyers checking out our new products.”

Participating in the Korea Pavilion, Sangwon Textile Co Ltd found the fair helpful in attracting distributors and wholesalers from Southeast Asia. Mr Jeon Hyeon Tae, Sales Manager said: “We have found about five potential and quality distributors from Taiwan, India, Philippines and Singapore on the first day. We also got to meet a number of wholesalers who prefer to buy from us directly at the fair.” He added that Intertextile Shanghai is also an ideal platform to launch new products for their existing clients.

As the largest pavilion this year, the Turkey Pavilion was in the limelight of the show, with both new and veteran exhibitors finding it useful to exhibit in Intertextile Shanghai. Bezmez Ev Tekstil did not intend to receive any orders in their first show, but was surprised to obtain three in just one day. These concrete results reassured their likelihood of coming back next year. “We definitely see the potential for Turkish products here in China as Chinese companies prefer quality products nowadays,” Mr Ayhan Bezmez, representative, further commented. Mr Fahri Goksin, Vice President of Gokhan Tekstil agreed with Mr Bezmez that Chinese buyers are in favour of new things like imported goods and Western brands. His company has been in the Shanghai fair for six years and continued to get satisfactory results. “We’re looking for retailers, wholesalers and online buyers. We’ve had all of these visiting our booth already.”

Domestic exhibitors satisfied with the number of potential customers and orders received

Recently, there is strong signs suggesting that the home textiles market in China is recovering with both imports and exports rising gradually. The positive outcome that Chinese exhibitors achieved at the August’s fair have resonated with the market condition. It is no surprise to see a number of domestic booths packed with visitors throughout the days. SohoCUT is a case in point. To them, Intertextile Shanghai is the place for actual business. “Compared with other fairs we’ve been to, this is the exhibition where a huge number of international buyers gather. We met buyers from China, Mexico, Russia, the US, India and Southeast Asia. We even got large orders for the first two days.” Mr Wheatley Weng, Managing Director said.

The fabrics of Wujiang Linwang Weaving Mill is also sought after at the fair. Being a company that do both exports and domestic trade, they are happy to connect with local and overseas customers during the show. “We’ve collected around 100 leads on the first day, of which 70% are domestic and the remaining being international. The overseas visitors are from Italy, Poland, Germany, Denmark, Chile and Korea that our products precisely meet their requirement. We see high chances of cooperation after the fair.” Mr Kenny, Sales Manager said.

Given the prevailing smart home concept in China, Somfy China Co Ltd which specialised in advanced sun-protection system has become one of the highlights at the fair. Ms Nancy Nan, Chief Executive Officer mentioned: “The visitor flow has been really high that our booth is swarmed by buyers. Amongst those visitors, there is no lack of medium to high-end customers who placed orders immediately.”

Editors assembled to promote high-end products

To cater to the ascending standards of Chinese customers, Intertextile Shanghai once again brought editors together in hall 5.1 to maximise their exposure to their target buyers. As foreign brands with subsidiaries in China, JAB and Prestigious see the growing interest in their premium products in China. “We pay attention to the changing buying habits of Chinese consumers and, as such, have started promoting a series of products under a unified lifestyle trend. It’s obvious that we are gaining more awareness from buyers at the fair,” Mr William Lin, Vice President of JAB ANSTOETZ Interior (Shanghai) Co Ltd said. He also appreciated the specific display area for imported fabrics and the organisers’ attempt to attract more designers, which helped them meet more potential customers. Apart from getting onsite orders, Prestigious Textiles (Shanghai) Ltd also considers the show a promotion platform. “There is great demand for our products in China. Though we achieved similar sales compared with last year, through this fair our brand has been well introduced to the market,” Mr Lewis Liu, Sales Director expressed.

Originating from China, Euroart Co Ltd was another editor that successfully showcased their latest collection at the fair. “It is a good time to join the most influential home textiles exhibition in Asia as we have just launched new products in May. We are satisfied as some of our existing clients plus new visitors came to our booth,” Ms Guo Jianhua, Director Assistant said.

Industry players benefit from the expanded Digital Printing Zone

The demand for digital printing solutions has been growing in recent years, especially as the industry has put more emphasis on green production. As such, the Digital Printing Zone expanded in size this edition, incorporating a Seminar Area and more exhibitors.

As an Italian company, MS Printing Solutions Srl experienced the potential of the sector in China. “The fair has been busy, and we’ve had steady flow of buyers coming through. The potential in digital printing here is just beginning. The Chinese government is pushing companies to reduce their pollution, so it has a big advantage in this regard over traditional textile printing,” Mr Walter Oggioni, Regional Sales Manager stated, adding that the company has been growing very fast globally, especially in China, Turkey, India and Pakistan.

This potential holds for domestic machine manufacturers as well. Specialising in the production of digital printing machines, Guangzhou Xu Cheng Electronic Technology Co Ltd was at the fair to meet fabrics suppliers. Mr Jesse Luo, Overseas Manager explained: “Compared with exhibitions for textile machinery, Intertextile Shanghai attracts more fabrics suppliers, which are our target clients. It helps even more as we are located in this special zone. We’ve been talking to a lot customers, including overseas buyers who are also interested in our machines.”

A series of seminars also provided opportunities for the industry to share their insights on this emerging sector. As a speaker, Foshan Sanshui Yingjie Precision Machinery believed the session was mutually beneficial for them and the audience. “Attendees are from the whole sector including manufacturers and end users, so we can discuss different perspectives. It will facilitate our improvement,” Mr Peng Jichang, General Manager said. Mr Scott Bai, representative of Huntsman Textile Effects (China) Co Ltd also benefited from visiting the zone and the seminar. “Together with seminar, the Digital Printing Zone can professionally present the current situation for the industry. When suppliers and users come together, we can discover the way to enhance this technology.”

Buyers benefited from wide range of quality exhibitors

Intertextile Shanghai is the largest trading platform in Asia with the whole spectrum of home textiles and accessories on offer. Hence, visitors, be they Chinese or overseas, can access a wide range of quality suppliers that meet their sourcing needs. Australian buyer, Mr Glenn Whitchurch from Trabeth Textiles, was impressed with his sourcing journey. “The polyester quality of domestic exhibitors has been unbelievable. What’s more, we’ve found the Chinese suppliers to be very flexible in meeting our needs, they’re clearly keen to accommodate overseas buyers.” Mr Whitchurch also commented favourably on the product range at Intertextile Shanghai compared to European fairs.

One ongoing trend at the fair over recent years is the increasing quality of domestic suppliers, which attracts buyers to come back and source. Mezanin V SRL from Moldova is a long-term supporter of the show, and place orders every year. Its Vice Director, Mr Mihail Tornea remarked: “It is an important event for us to meet new suppliers from China. We are selective with the suppliers we work with, but the Chinese companies here meet our requirements. As a sourcing event, Intertextile Shanghai is the best place to be.”

The fair’s VIP buyer programme also assists buyers in meeting worldwide exhibitors at ease. Mr Bibo Lan is the co-founder of Loft Curtains in the US and he is excited to meet lots of potential suppliers here. “The arrangement for VIPs is satisfying and it helps a lot to have my target exhibitor information in advance. The largest benefit of our visit is that we met Libeco from Belgium, while we also confirmed to work with a blackout supplier at the fair,” he said.

Chinese buyers agreed that Intertextile Shanghai is the most effective sourcing platform in Asia. “Overseas suppliers like Turkey exhibitors are our main interest. So far, we have connected with four to five exhibitors in hall 4 and will place orders with them soon. In terms of exhibitor number and the product range, I feel that the fair has improved a lot. It is my favourite show with a lot of overseas products to discover,” Mr Huang Shenghua, General Manager of Ziranfeng Home Textile Co Ltd said.

Concurrent events inspired the industry

Apart from facilitating business between exhibitors and visitors, the fair also incorporated various design elements via a series of concurrent events. These included display area like Trend Area, International Fiber Art Exhibition and Home Furnishing Crossover Exhibition where participants could find innovative designs and ideas.

This was also the first time the Andrew Martin International Interior Design Summit and the fair took place concurrently. Experts from the interior design, architecture and art sectors were invited to share and discuss their views on the transformation of design in the new information era. Mr Kot Ge, founder of a domestic interior design studio, LSDCASA was delighted to join, and shared: “This show always attracts many top interior designers and it’s my pleasure to meet them here. Interior design and home textiles are closely related and new concepts can bring along improvement.”

Intertextile Shanghai Home Textiles – Autumn Edition was organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA). The next Autumn Edition will take place in August 2018, while the Spring Edition runs from 14 – 16 March 2018.
To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.