From the Sector

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber though finished sewn products, issued the following statement today in response to the U.S. Trade Representative Office’s (USTR) announcement regarding the next steps for the proposed 10 percent tariff on approximately $300 billion of Chinese imports.  NCTO testified most recently on June 20, urging the administration to move forward with tariffs on finished apparel and home textile products.

“As U.S. manufacturers that have suffered enormously from China’s illegal IPR activities and state-sponsored export subsidies, we strongly support the administration’s decision to move forward with this next tranche of 301 retaliatory tariffs that will finally cover a significant portion of China’s exports in our sector,” said NCTO President and CEO Kim Glas.

The National Council of Textile Organizations (NCTO) commends the Senate for passing the National Defense Authorization Act of Fiscal Year 2020, which strengthens the Berry Amendment and safeguards our national security, by setting compliance requirements to all Department of Defense acquisitions at or above $150,000.

The Senate bill rolls back the threshold for Berry compliance requirements to 2017 levels and adjusts future increases for inflation, which the U.S. textile industry supports.

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

The National Council of Textile Organizations (NCTO) held its 16th Annual Meeting March 19-21 in Washington, DC.  Elected as NCTO officers for 2019 are:

• Chairman – Leib Oehmig, CEO of Glen Raven, Inc.
• Mr. Oehmig is CEO of Glen Raven, Inc., based in Glen Raven, North Carolina.  Glen Raven is an innovative leader in textile research and development, dying, spinning, weaving and finishing, and distribution and logistics.
• Vice Chairman – David Roberts, CEO of CAP Yarns, Inc.
• Mr. Roberts is CEO of CAP Yarns, Inc., based in Clover, South Carolina.  CAP Yarns is a specialty yarn manufacturer and a leader in developing unique yarns for the knitting and weaving industry.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers.  

• U.S. employment in the textile supply chain was 594,147 in 2018.  
• The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018.  
• U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018.  
• Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available.

TRSA said today that a study published in Infection Control and Hospital Epidemiology painted an unnecessarily alarming picture regarding the risk of C. difficile contamination from hospital linens and potential infectious outbreaks.
The study, titled From ward to washer: The survival of Clostridium difficile spores on hospital bed sheets through a commercial UK NHS healthcare laundry process concludes that “processing infected linen in commercial washer/extractor cycles could disseminate low levels of C. difficile spores and may be contributing to sporadic outbreaks of C. difficile infection (CDI).”

“Therefore, even in the study’s assessment, the findings are conditional,” said TRSA President and CEO Joseph Ricci. Ricci said that additional facts mitigate them even more:
•    The conclusion is based on one wash formula’s inability to meet the British National Health Service (NHS) standard. This standard indicates that water temperature and the amount of time that linen is washed are the true indicators of wash quality.
•    Best-management practices dictate that the quality of the wash process is maximized by using a complete wash formula that includes temperature, chemistry and mechanical action, which are customized to address various soil levels and generate hygienically clean textiles. In addition, heat from drying, ironing and finishing these linens also contributes to the linens’ cleanliness. Perhaps the only valid conclusion that can be reached from this research is that the one wash formula tested in the study is inadequate to remove C. difficile.
•    Most outsourced, professionally laundered healthcare linens and uniforms are processed using a tunnel washer, not washer/extractors used in the research.
•    Most healthcare-related wash formulas are designed to account for time, temperature, chemistry and mechanical action that appropriately eliminate C. diff. For example, the FDA recently approved the use of a disinfectant specifically formulated to kill off C. difficile spores.
•    TRSA has been collecting microbiological testing data since 2014 on linen and uniform service laundries that have achieved and maintained the Hygienically Clean certification by eliminating bacteria on soiled linens to negligible levels; there have been no positive identifications of C. difficile.
•    difficile contamination linked to linens is extremely rare. The best way to protect your facility and patients is to partner with a Hygienically Clean certified laundry.

TRSA, the global association for the linen, uniform and facility services industry, has donated approximately $80,000 to Anayat House, Children of Restaurant Employees (CORE) and ConPRmetidos: organizations assisting those impacted by hurricanes in Florida, Texas and Puerto Rico.

The donations are the result of TRSA’s 105th Annual Conference, which had been scheduled for last September in Miami, but was cancelled due to Hurricane Irma. While offering to refund all registration and sponsorship fees, TRSA asked members to donate all or a portion of those fees to support local charities.

“We’re very proud of the TRSA community, which was able to create some positive outcomes in an overwhelmingly tragic circumstance,” said Joseph Ricci, CEO of TRSA.

"The contribution from TRSA will directly assist low income families and the elderly who seek overnight accommodations during a medical crisis,” said Tressa Clarke, Executive Director of Anayat House, which provides affordable overnight accommodations for family members of patients at local Beaumont, TX, hospitals and anyone traveling to Beaumont for medical care and outpatient treatment. “This contribution will help bridge the gap between the suggested donation of $20 and the actual cost of $90 per room.”

CORE, an organization that is part of the Florida Restaurant & Lodging Association, grants support to children of food and beverage service employees navigating life-altering circumstances. "CORE was incredibly grateful to receive the generous donation from TRSA," said Lauren LaViola, executive director of CORE.  “The donation to CORE will help to fulfill grants for qualifying children of food and beverage service employees navigating life-altering circumstances."

“I feel truly inspired by TRSA’s continued commitment to the support of our industry’s community of families. It is an honor and a privilege to be part of such great association,” said Pablo Lucchesi, Managing Partner of Crown Linen, in whose name TRSA made the CORE contribution.

An additional contribution was made to ConPRmetidos, an organization that specializes in matching Puerto Rico’s “diaspora” – people who settle away from their ancestral homeland – with companies there to help them grow.

“We don’t have words to say thanks for all your generosity,” said Michael Shulevitz, President of Cadillac Uniform & Linen Supply in Puerto Rico. “Thank you for helping Puerto Rico to rise up again.”

The $80,000 donation follows an immediate TRSA charitable effort that took place just after the conference, when several hundred homeless residents were given welcome boxes that had been packaged for conference attendees at the time of the cancellation.

At the “Future of Composites in Construction” trade show, CHOMARAT and ALTUS GROUP are presenting CarbonCast®, their flagship line of reinforced-concrete prefabricated wall panels, reinforced with CHOMARAT’s C-GRID® carbon-fiber grids. A recent army-hospital project in Greenville, South Carolina is another success story of this innovative product: 18,600 m² (200,000 sq.ft) of precast insulated panels were installed in record time. Come and learn more about it at the McCormick Place Lakeside Center, Chicago, Stand C 10, on 20-22 June 2017.
“Reducing installation time, improving the fire and safety performance, increasing the service life of structures, and cutting energy consumption are crucial criteria in the choice of a CarbonCast solution,” explains ALTUS GROUP Executive Director John CARSON. CarbonCast® panels are classified ASHRAE 90.1. Thanks to the low thermal conductivity of carbon fiber, C-GRID® reinforced panels offer excellent thermal performance, providing uniform insulation and, therefore, a comfortable, energy-efficient building.