From the Sector

100% sustainability lives in the smallest detail, starting with the label, the only element that can tell the story of responsibility. This is exactly why, to be a truly credible 'ambassador', the label or tag must itself be responsible. This is why Nastrificio di Cassano has created NDC Green, the premium, Made in Italy and fully traceable range that guarantees the highest quality standards while respecting the planet.

NDC Green comprises 4 categories, all with influential international certifications that attest to Nastrificio di Cassano's responsible imprinting. Many new sustainability values are woven into the collection. Particular attention is given to end-of-life, but also to the choice of natural and high-tech materials with a low environmental impact.

A wide choice that speaks of responsible innovation, beauty and functionality: characteristics that have led C.L.A.S.S. (www.classecohub.org) to integrate NDC Green into its Material Hub which "contains a selection of fibres, materials and fabrics that share a DNA linked to research that since 2007 has been raising the bar of standards in order to offer innovations in step with the demands of the contemporary consumer" says Giusy Bettoni CEO of C.L.A.S.S.
NDC Green includes:

• LABìO ECO-SOFT®: made using compostable and biodegradable ingredients (as attested by TUV Austria), this product boasts performances and is resistant up to 10 domestic washings at 30°. The reference is produced with fifteen times less water consumption than cotton production and the resins used are GOTS certified.
• LABìO HANGreen is the smart solution for the creation of hard tags, hangtags, shopping bags and garment covers and, as LABIO ECO-SOFT® range, it made with  compostable and biodegradable ingredients as certified by TUV Austria and the resin is compostable, too. These peculiarities make this product unique.
• ACETATE NAIA™, the 'smart satin' that respects forests and oceans, is the NAIA™ single-ingredient solution produced by Eastman: the 100% traceable, compostable and biodegradable cellulose yarn in both soil and sea respects the natural growth rate of forests.
• RECYCLED POLYESTER: is made from post-consumer yarn recycled from GRS-certified PET bottles. Available in both satin and resinated taffeta versions, it guarantees excellent printability for an elegant and sophisticated look.

Sateri, one of the world’s largest viscose producers and a member of the RGE group of companies, continues its collaboration with Infinited Fiber Company, a textile fibre technology group based out of Finland, and participated in the company’s latest EUR30 million funding round completed on 30 June 2021. In addition to existing investors like Sateri, Infinited Fiber Company has attracted new investors including adidas and BESTSELLER.

This securement of new funding follows Infinited Fiber Company’s April announcement of plans to build a flagship factory in Finland in response to the strong growth in demand from global fashion and textile brands for its regenerated textile fibre Infinna™. The factory, which will use household textile waste as raw material, is expected to be operational in 2024 and to have an annual production capacity of 30,000 metric tons. The new funding enables Infinited Fiber Company to carry out the work needed to prepare for the flagship factory investment and to increase production at its pilot facilities in the years leading to 2024. The engineering progress supported by the additional funds also accelerates Infinited Fiber Company’s ongoing collaboration and potential technology licensing with Sateri.

Sateri strategically contributes to RGE’s commitment and strategic business direction. Sateri has developed and produced a diverse range of circular and sustainable products including Lyocell and FINEX™, which is made from recycled textile waste. The in-house R&D efforts and the investment in Infinited Fiber Company are part of RGE’s $200 million investment commitment to advance next-generation textile fibre innovation and technology.

FibreCoat GmbH from Aachen, Germany, together with DBF Deutsche Basalt GmbH, developed a completely new type of fibre material to shield electromagnetic radiation from digital end devices, medical technology or e-car batteries cheaply and effectively. The joint project was awarded the overall prize of the“ IQ Innovationspreises Mitteldeutschland“ on 24 June in an online event broadcast live from Leipzig.

The prize is endowed with €15,000 and was sponsored by the Halle-Dessau, Leipzig and East Thuringia Chambers of Industry and Commerce.

Electromagnetic radiation from smartphones, hospital diagnostics and electric car batteries must be shielded so that they do not inter-fere with each other. To prevent mutual interference, they have so far been covered with metal fibre fabrics, a very time- and energy-consuming and thus expensive procedure. The new material from Basalt Faser GmbH and FibreCoat GmbH prevents this with a fibre core made of melted, thinly drawn basalt, which is coated with aluminium and bundled into the so-called AluCoat yarn. This yarn remains just as conductive and shielding, but is lighter, stronger, cheaper and more sustainable than previous alternatives. In addition, there are further advantages:

• The number of process steps required is reduced from ten to one.
• 1,500 metres of yarn are produced per minute instead of the previous five metres.
• The energy required is only 10 per cent of the previous amount.

The result is a price that is twenty times lower.

The textile made of AluCoat fibres is versatile and flexible: as wallpaper it can shield 5G radiation in offices or medical rooms or encase batteries and thus ensure the smooth functioning of electric cars. AluCoat is already being used in some companies. A European fibre centre in Sangerhausen is being planned for mass production.

The two innovative companies DBF Deutsche Basalt GmbH and FibreCoat GmbH from East and West combine the two materials basalt and aluminium to protect against electromagnetic radiation. In doing so, they coat basalt with aluminium and, through this novel combination, create an inexpensive, sustainable and quickly produced alter-native for a market worth billions.

FibreCoat GmbH from Aachen is a spin-off of the Institut für Textiltechnik (ITA) of RWTH Aachen University; the managing directors Dr Robert Brüll and Alexander Lüking and Richard Haas have completed their doctorates at the ITA or are in the process of preparing their doctorates. Georgi Gogoladze, Managing Director of Deutsche Basaltfaser GmbH, also studied at RWTH Aachen University. The two managing directors Brüll and Gogoladze know each other from their student days.

• New air purification and sulfur recovery plant up and running at the Lenzing facility
• Another step closer to meeting sustainability and climate targets
• Self-sufficiency in raw materials further enhanced

Lenzing Group is continuing to make great strides toward achieving carbon neutrality across the Group. The successful completion and commissioning of an air purification and sulfur recovery plant at the Lenzing facility marks another milestone in the Group’s ambitious strategy. Lenzing has invested some EUR 40 mn in this project since construction began in 2019.

Using state-of-the-art technology, the plant will enable carbon emissions to be reduced by 15,000 metric tons at the Lenzing facility. This will also make the group more self-sufficient in securing vital raw materials for processing, which will bolster the site’s competitive standing in terms of sustainability.

“As a result of this investment, Lenzing has made further progress towards implementing its climate targets, while achieving much greater autonomy with regard to one of its core raw materials”, says Christian Skilich, Member of the Managing Board at Lenzing Group.

In 2019, Lenzing set the strategic target of halving its group-wide greenhouse gas emissions per ton of product by 2030. Its goal for 2050 is to achieve climate neutrality.

The textile industry is constantly searching for new, sustainable, and circular materials. Following thorough research and testing, Spinnova and KT Trading have developed a natural leather fabric made from leather waste without harmful chemicals.

"Leather is an amazing high-quality material with unique properties. With this new textile, we have taken yet another step towards completing the circular economy for leather," says Kristian Geert Jensen, CEO of KT Trading, who now has a joint venture with Spinnova.

Spinnova CEO: Sustainable innovation
Together with KT Trading, ECCO’s key leather provider, Spinnova has established the Respin company - a new joint venture. The partners are already constructing a leather fibre production pilot plant in Finland.

ECCO’s Applied Research division and Spinnova have been in a R&D collaboration since 2018 and have made successful trials with spinning the protein biomass into fibre. Processing leather raw material does not require further technology development from Spinnova. The company already has proof of concept from using the method on wood-based raw material.

• ANDRITZ receives an additional order for a high-speed spunlace line from Zhejiang Kingsafe, China

International technology Group ANDRITZ has received an order from Zhejiang Kingsafe Hygiene Materials Technology Co., Ltd. in Hezhou, China, to supply a complete new neXline spunlace line. The line is scheduled for installation and start-up during the second quarter of 2022.

This high-capacity spunlace eXcelle line will process either 100% biodegradable fibers or blends of polyester and viscose. It is dedicated to the production of hygiene and medical fabrics. The final products will have fabric weights ranging from 30 to 100 gsm, and the annual production capacity will be up to 18,000 tons.

ANDRITZ will deliver a complete line, from web forming to drying, also integrating two high-speed TT cards, the well-known JetlaceEssentiel hydroentanglement unit and the neXdry through-air dryer equipped with a neXecodry S1 system for energy saving. This combination is becoming the market benchmark for the production of lightweight spunlace fabrics dedicated to the hygiene market.

“We are proud to operate ANDRITZ nonwoven lines, which are very reliable and efficient. It helps us a lot in producing top-of-the-range, nonwoven roll goods, thus enabling us to be recognized as a key player among nonwovens producers worldwide,” says Kingsafe’s president, Mr. Huarong Yan.

Zhejiang Kingsafe Hygiene Materials Technology Co., Ltd., founded in 1987, is one of the largest companies in China producing spunlace and spunbond nonwoven roll goods, with several spunlace lines already in operation. The final products are exported all over the world and used in many fields, such as the medical sector, health care, high-tech agriculture, and high-quality consumer and household products.

The new line is now the ninth spunlace line supplied by ANDRITZ and the third with high-speed TT cards, thus confirming the successful, long-term partnership between ANDRITZ and Zhejiang Kingsafe. The order also proves that the solution provided by ANDRITZ is recognized as the benchmark for production of premium spunlace roll goods and contains the perfect combination for wipes converting machines.

Institut für Textiltechnik of RWTH Aachen University has changed the format of the 2021 Aachen Reinforced! Symposium to an online only format. The programme was shortened to suit the new format, with presentations taking place on Monday 10th May and Tuesday 11th May.

The conference program for Monday, 10th May:
The programme will begin with exciting presentations on glass chemistry and fibres. A talk by Dr Anne Berthereau (Owens Corning Composites) on the race for always higher modulus glass fibres will be followed by a talk from Dr Hong Li (Nippon Electric Glass) on the potential of new high-strength and high-modulus glass fibres.
After two further presentations on high modulus and bioactive glass fibres from Muawia Dafir and Julia Eichhorn (TU Bergakademie Freiberg), we will learn about furnace efficiency as well as process monitoring and digitalisation in glass fibre production from René Meulemann (CelSian), Hans Gedon (Gedonsoft) and Julius Golovatchev (Incotelogy) respectively.
A presentation by Felix Quintero Martínez (Universidade de Vigo) will explore a novel method to produce ultra-flexible glass nanofibers.
The afternoon will continue with two presentations by Dr Christina Scheffler (Leibniz-Institut für Polymerforschung Dresden e.V. (IPF)) and Professor James Thomason (University of Strathclyde) in the field of glass fibre sizings and fibre-matrix interfaces. Finally, a closing presentation by Steve Bassetti (Michelman) will conclude the first day of the Symposium.

The entire conference programme is available on the website https://aachen-fibres.com/aachen-reinforced/general-information.
To register for the Symposium, use the following link: https://aachen-fibres.com/aachen-reinforced/registration