From the Sector

OutDoor2018: Schoeller’s coldblack® technology has been specifically optimized for use on knitted and woven fabrics so brands can now expand their product application uses. Under the blazing sun, textiles with coldblack® heat up less and stay cool to the touch. Südwolle Group, a leading manufacturer of high quality yarns, has also recognized the ideal combination of merino and coldblack®. With this, the wear comfort of wool apparel can be tangibly improved.

Wool is well known for its various property benefits, including insulation, natural antibacterial protection, odor control, light weight and nearly wrinkle free composition. Not only in the winter time, but also in summer particularly merino wool, a special high-quality type of wool, regulates moisture balance and thus the body temperature. The fibers can absorb a great deal of moisture or sweat and transport it away from the body. Warm ambient air quickly dries the material and causes a cooling evaporation, which makes it very comfortable to wear merino apparel in the summer time.

coldblack® technology from Schoeller supports the natural properties of wool because it reliably reduces heat build-up when exposed to the sun. Together with the help of Südwolle Group, the finish has been optimized specifically for the use in merino apparel. The yarn manufacturer chooses coldblack® for a variety of uses, especially for knitting and weaving yarns for sports and outdoor apparel and develops such products individually according to its customers’ requirements.

Stéphane Thouvay, Managing Director Product Management & Innovation at Südwolle Group, summarizes the use of the technology as follows: “coldblack® is part of our product range for the summer time, which we will be presenting at OutDoor show in Friedrichshafen. The technology reduces not only heat build-up, but also enhances the natural UV protection of wool without affecting the look and feel of the fabric. Therefore coldblack® perfectly fits into our yarn selection for sports and outdoor apparel, for example in our collection ʻYarn in Motion’. For end consumers garments made of coldblack® yarns can optionally be labeled with hangtags.”

When used in high-quality woolen fabrics, coldblack® has already proven its performance and is being used by renowned brands in various collections of men’s suits. Since 2008, the technology has been licensed by more than 200 brands, in sports particularly in the field of cycling, triathlon and golf. All components of the finish are bluesign® approved.

Exhibiting at this week’s Association for Professionals in Infection Control and Epidemiology (APIC) Annual Conference, Hygienically Clean Healthcare certified laundries provided nearly 200 copies of a training video guiding caregivers in improving soiled linen handling performance.

Provided on a flash drive: the 13-minute video (The Six Cs: Handling Soiled Linen in a Healthcare Environment), a quiz to immediately assess viewers’ grasp of the video’s lessons and posters to reinforce these year-round. Distributed since 2016, the video has been hailed for its value in aiding compliance with OSHA universal precautions regarding items saturated with blood, bodily fluids, harmful residue from treatments and other potentially infectious material.

The flash drive offer intrigued infection preventionists (IPs) from a single facility or those responsible for this function throughout health systems, whether acute or outpatient care environments or both. The drive also attracted the attention of other professionals who visited the Hygienically Clean exhibit, such as federal and state health officials and suppliers of products and services to the IP profession.

Distributing the flash drive is a hallmark of the Hygienically Clean program’s philosophy of addressing healthcare providers’ operational needs outside the scope of outsourced laundries’ traditional functions. Certified operators’ certification fees provide funding for creating and distributing the video and other education tools for healthcare facilities.

Visitors to the Minneapolis display who previously received the video vouched for its effectiveness. Certified laundries have individually distributed the flash drive to customers and prospects in addition to  their collective effort to provide them at previous APIC and Association for the Healthcare Environment (AHE) expos.

The video’s easy-to-follow steps improve infection control and patient care and reduce costs by addressing OSHA-required universal precautions. Employees who handle soiled linen (usually nurses and environmental services staff) must assume all human blood and potentially infectious materials they touch are infected, because they can’t be sure which patients are infected or what infections are present.

Adhering to the six Cs (cover, collect, contain, consolidate, clean, cooperate) each day prevents injury and reduces the risk of spreading of infection to co-workers, patients and residents. These positive outcomes are only achieved when workers first protect themselves.

The flash drive is available to all healthcare providers at no cost. It also contains the Hygienically Clean standard and other guidance documents for infection preventionists related to linen and uniforms. Among these documents: Handling Clean Linen in a Healthcare Environment, an 8-page guide to safeguarding through effective transportation, storage and distribution.

• Archroma joins hands with Lahore University of Engineering & Technology to foster innovative research in textiles

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals, announced it has signed a Memorandum of Understanding (MoU) with the University of Engineering & Technology (UET), Lahore, Pakistan. The MoU will pave way for cooperation initially for a five-year period.

The partnership will explore innovations in textile research with futuristic visualization for Pakistan to help the Pakistan textile industry to keep in line with the fast pace of global apparel requirements and evolutions. Both partners will jointly hold sessions to prepare students for the challenges of the textile industry through in-house training sessions, developmental projects, research in textile applications and process innovative methodologies by pioneering value additions. The students of UET will also be able to join internship placement programs at Archroma Center of Excellence at Karachi.

The MoU was officially signed at a ceremony recently held in Faisalabad by Prof. Dr. Fazal Ahmed Khalid, Vice Chancellor of UET and Mujtaba Rahim of CEO Archroma Pakistan Limited.

Speaking at the occasion, Mujtaba Rahim said: “We, at Archroma, believe in continuous improvement and challenging the status quo leading to enhance sustainable growth especially in our product lines creating value for our stakeholders. Through this initiative of mutual cooperation, we will be able to share latest knowledge and technical developments and to work together with the faculty and research team of UET. We also wish to share the innovative textile solutions of Archroma with the students enabling them to enhance their academic performance. Our MoU will go a long way in adding value in the fast growing textile segment, from education to R&D development.”

“This partnership is going to have far-reaching impact in textile research which will bear highly positive results for UET and Archroma. Our academic team has already collaborated with Archroma on projects that will have a far reaching impact on the textile industry. We are very enthusiastic about formalizing our mutual relationship and look forward to interesting research outcomes. Industrial liaison of students will create confidence and the training, internships and working sessions will benefit them in their career development,” Prof. Dr. Fazal Ahmed Khalid commented.

• Fibres for automotive composites, technical textiles, hygiene and medical nonwovens
• UltraLink fibres offer sustainable system cost reduction solutions to the automotive industry
• Meralux offers improved liquid management for a dry feeling
• Stand 2034, ANEX 2018, 6-8 June, Tokyo Big Sight, Japan

Beaulieu Fibres International, the leading European polyolefin fibre supplier, marks its Asia Nonwovens Exhibition and Conference (ANEX) debut with unique products and capabilities to support innovation at a local level within the automotive and hygiene segments.

At Stand 2034, Beaulieu Fibres International demonstrates its commitment to the global market growth for automotive composites and technical textiles, as interest increases in adopting lightweight materials to reduce vehicle weight and fuel efficiency.

The company will present UltraLink bonding fibres that improve the mechanical, thermal and functional properties of the final part, allowing customers to meet OEM specific standards in a more sustainable way. They are available in both MONO and BICO technology – a first for the composites industry.

Jefrem Jennard, Global Sales Director – Industrial Fibres, comments: “Beaulieu Fibres International developed UltraLink fibres over the past two years to provide an answer to the automotive industry’s continuous strive for lower weight, lower emission, lower cost and better properties. They are being introduced in new global automotive programmes with SOP 2019-2021. We are delighted to introduce them to the Asian market at ANEX.”

At ANEX 2018, Beaulieu Fibres International also presents its platform of unique Meralux fibres offering significant improvements to the dryness of nonwoven for hygiene and medical applications. The BICO fibre has a special cross section, which enables it to provide bulk, opacity and enhanced fluid management compared to standard round fibres to nonwoven constructions. As a result, a dry feeling is achieved for the final nonwoven.

Petra Bohle-Stricker, Global Sales Director – Hygiene Fibres, comments: “As Asia Pacific heads towards becoming the largest regional tissue and hygiene market by the end of 2025  , nonwovens producers can already take advantage of the benefits of Meralux to launch new and innovative products that will grab the attention of global and local manufacturers. Visitors to our ANEX booth can experience Meralux fibres first-hand in nonwoven samples.”

Since Meralux was first launched in April 2017, the portfolio has expanded to include Meralux T and Meralux Soft. Beaulieu Fibres International is currently expanding its production programme with polyester-core (PET) BICO. In addition a pilot line for new developments is under construction. Both are expected to come on stream in 2018.

Am 14. Juni 2018 startet die Fußball-WM in Russland. Durch die zum Teil frühen Anstoßzeiten werden sich etliche Modehäuser für eine Übertragung der Spiele im Geschäft für Kunden und Mitarbeiter entscheiden. Zudem haben bei den letzten Turnieren speziell Geschäfte mit männlicher Kundschaft Spiele mit deutscher Beteiligung mitunter für Kunden-Events genutzt.

Wichtig in diesem Zusammenhang ist die rechtliche Absicherung der Übertragung im Geschäft. Gemeinsam mit der Bundesvereinigung der Musikveranstalter konnte der HDE mit der GEMA einen Sondertarif für die Wiedergabe von Fernsehsendungen anlässlich der Fußball-Weltmeisterschaft 2018 vereinbaren. Dieser Sondertarif in Höhe von 85,25 Euro brutto (bis 200 qm) bzw. 170,49 Euro (201 bis 400 qm) kann angewandt werden, wenn in Betrieben bzw. Räumen mit entsprechender Größe Großbildfernseher/Leinwände über 106 cm bzw. über 42 Zoll Bilddiagonale aufgestellt werden.

In einigen Fällen kann allerdings der reguläre Fernsehtarif (für zwei Monate) günstiger sein als der GEMA-Sondertarif. Dies gilt insbesondere, wenn kleinere TV-Geräte bis 106 cm Bilddiagonale (= 42 Zoll) aufgestellt werden. Weitere Details enthält das HDE-Merkblatt „Fakten und Konditionen zur TV-Übertragung der Fußball-Weltmeisterschaft 2018“, das über die regionalen Einzelhandelsverbände angefordert oder unter www.einzelhandel.de (Log-in erforderlich) heruntergeladen werden kann.

Attendees of the May 19-22 National Restaurant Show in Chicago learned that linen, uniform and facility services providers serving restaurants and other foodservice operations can be distinguished by earning third-party verification of their sustainability and cleanliness, as TRSA exhibited its Clean Green and Hygienically Clean Food Service certifications at the show.
More than 150 individuals viewed the exhibit, which screened a new animated video explaining the Clean Green designation. It’s now showing on TRSA’s YouTube page (https://www.youtube.com/watch?v=I-24iVCNRT0).

Depicting operations within a laundry, the video shows how contracting with a Clean Green certified provider delivers services restaurants need and gives them peace of mind from doing business with a sustainable provider. Clean Green operations comply with water and energy standards and demonstrate best management practices in supplying, laundering and maintaining textiles.

Visitors to the exhibit learned which providers serving these attendees’ home geographic areas are Clean Green certified and were encouraged to work with such a certified provider if not already doing so. Speaking with attendees also gave TRSA staff the opportunity to ask them about their experience with providers and, if currently under contract with one, its identity.

• 76 percent of those questioned indicate they currently use such a provider. Most could identify it by name
• 18 percent said they use an on-premises or home laundry for linen and uniform needs. Many of these respondents indicated they work for hotels, healthcare facilities, colleges or military bases with their own laundry equipment
• 6 percent said they use disposable products (napkins, wipers) instead of their reusable textile equivalents; most of these respondents are in quick-service restaurant operations

The TRSA display distributed copies of Sustainability: Finding the “New” Green in Your Restaurant Supply Chain, a 7-page guide to using a systematic approach to choose suppliers whose products/services are proven to be more sustainable than those of their competitors and whose own practices are more sustainable.

TRSA’s exhibit also kicked off a survey of restaurant management to determine their perceptions of table linen service as a plus for facility hygiene and service to diners. Results will help TRSA communicate to the restaurant industry the value of using Hygienically Clean Food Service certified providers in the hope that doing so becomes an industry standard.

Such certified laundries commit to cleanliness through third-party, quantified biological testing and inspection. This process eliminates subjectivity by focusing on outcomes and results that verify linens and uniforms cleaned in these facilities meet appropriate hygienically clean standards and best management practices for servicing full- and limited-service restaurants, hotels, hospitals, educational institutions and other locations where food is handled and served.

ABOUT CLEAN GREEN
Clean Green certification recognizes linen, uniform and facility services companies that demonstrate responsible leadership in sustainability and conservation by acknowledging commitment to improving water and energy efficiency and adoption of best management practices for reusing, reclaiming and recycling resources. Certified operations meet quality standards for effectiveness in conserving resources and minimizing environmental impact. Customers that use Clean Green certified companies to supply, launder and maintain linens, uniforms, mats and other reusable textiles can be assured that their provider maximizes sustainable practices.

ABOUT HYGIENICALLY CLEAN
Hygienically Clean certification demonstrates linen, uniform and facility services companies’ commitment to cleanliness through independent, third-party laundry plant inspection and quantified microbial testing. Inspection and re-inspection verify that items are maintained, washed, dried, ironed, packed, transported and delivered using best management practices to meet key disinfection criteria. Between scheduled and supplemental inspections, ongoing microbial testing quantifies cleanliness and indicates laundry process adjustments.

Business networking event on the future of leather interiors

Lectra, the technological partner for companies using fabrics and leather, welcomed guests from all areas of the automotive leather supply chain at its International Advanced Technology Center (IATC) in Bordeaux-Cestas, France, for two action-packed days of demonstrations, workshops and talks by industry experts during the fourth annual “Go Digital” automotive leather event.
Building on the previous editions’ themes of digitalization of manufacturing processes and the adoption of Industry 4.0 principles, this year’s presentations focused on the value creation enabled by leveraging manufacturing data. A showcase for the innovative applications Lectra is developing based on Industry 4.0 principles, the company’s trade gathering demonstrated how disruptive new technologies are enhancing the onboard experience while reorganizing the automotive interiors supply chain.

Several guest speakers provided insight into the ways industry megatrends are impacting the automotive cockpit of the future. As motorized vehicles become increasingly autonomous, connected and electrified, cementing their place in the shared mobility landscape, suppliers must now devise new strategies to achieve profitable growth. Traditional business models are losing ground to cross-functional collaboration partnerships, making it even more challenging to compete in the fast-moving connected, shared economy.
“It is disruptive for the entire automotive supply chain,” remarks Nathalie Saint Martin, Vice President, Group Purchasing, Faurecia. “We are all learning to evolve together and enhance the added value to our end-customers. The level of collaboration we are now seeing among suppliers is unprecedented.”

Other keynote speeches included market research consultancy Frost & Sullivan’s analysis of automotive trends in the data-driven economy, Testing, Inspection and Certification (TIC) specialist Bureau Veritas’ vision of data protection for automotive and a presentation of industry insights firm WardsAuto’s selection of top 10 best vehicle interiors of 2018.
The event enables a diverse array of supply chain players in automotive interiors to gather with their peers. "Events like this one are a great opportunity to talk face-to-face with other suppliers about industry-wide challenges,” notes Claus Lattner, Director Engineering, Process Management, CoC Cut Sew Wrap Global, Yanfeng Automotive Interiors. “It is not often we find ourselves in the same room to talk about consumer perception and the sustainability of leather, for instance."

“The event provided a great opportunity to interact with suppliers who have a direct impact on innovation in interior design and manufacturing,” said John Sousanis, Managing Director of Wards Intelligence.
For Javier Garcia, Senior Vice-President, Automotive Sales, Lectra, bringing together the automotive leather community is especially important as it rises to new business challenges stemming from continually changing consumer habits and the digitalization of manufacturing processes. “Connectivity and occupant comfort are increasing the amount of high-tech content in automotive interiors, but the up-market appeal of leather makes it a constant,” states Javier Garcia. “By fostering exchange, Lectra is doing its part to help the automotive leather ecosystem evolve to meet new consumer expectations.”

CHOMARAT North America has just been awarded AS 9100 certification. CHOMARAT Group’s US facility that specializes in Advanced Composites reinforcements is located in Williamston, South Carolina. The new certification covers aerospace quality management systems and follows the Group’s development strategy relative to quality and risk management. “Our North American plant’s new AS 9100 certification proves our organisational maturity and provides a vital asset to enable us to become a leading aerospace supplier,” said Michel COGNET, Group Managing Director at CHOMARAT.

MEETING THE DEMANDS OF THE AEROSPACE MARKET
With this certification, CHOMARAT North America is following in the footsteps of the Group’s French plants that were certified to ES 9100 in 2012. The facility now meets the strict criteria set by the market for high performance composites reinforcements for the aerospace industry. The quality system and risk management standards are recognised by purchasers worldwide and is in line with the Group’s growth strategy for the aerospace market. “We are proud of this AS 9100 certification that clearly demonstrates our commitment to quality management and reliability. This accomplishment now allows us to compete as an international aerospace supplier from multiple continents!” said Brian LAUFENBERG, President of CHOMARAT’s NA business.

C-PLY^TM,
THE CHOMARAT REINFORCEMENT THAT HAS ALREADY PROVEN ITS WORTH IN THE AEROSPACE INDUSTRY
CHOMARAT has already made a name for itself in the aerospace market with fabrics, tapes and multiaxial carbon reinforcements, particularly its C-PLY™ range. These materials are designed for primary and secondary structures as well as aircraft interior parts. These highly modular materials offer great angle and ply flexibility and open up new opportunities for designing lighter, more efficient and lower cost composite parts. This is a huge advantage in a market with high productivity demands.
This is why C-PLY™ was recently chosen by VX AEROSPACE for their foldaway drone, which can be stowed inside a cylindrical container and deployed from a tactical aircraft. The carbon multiaxial material is used in the construction of the wing, the horizontal stabilizers, the vertical fin and all of the control surfaces. “There is no better material! The extremely thin multiaxial reinforcement is perfect, because strength and stiffness are tailored according to demand. It offers extremely high performance at a reduced cost.” said VX AEROSPACE Chief Engineer Bob SKILLEN.

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals, announced the further integration of M. Dohmen, an international group specializing in the production of textile dyes and chemicals for the automotive, carpet and apparel sectors. This went into effect on May 1, 2018 and follows Archroma expanding its stake in M. Dohmen from 49% to 75% in September 2017.

The increased integration will be implemented in North America and Korea. In North America, 20 employees from M. Dohmen USA, Inc joined Archroma when the company merged into Archroma U.S. Inc. operations in the US and into Archroma Canada, Corporation in Canada.

In Korea, Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018, and its 75 employees will now work under the Archroma brand.

“The further integration of M. Dohmen into Archroma will enable us to strengthen our offerings to textile markets worldwide” explains Marcos Furrer, President Brand & Performance Textile Specialties and Innovation, Archroma. “Regardless of their location, our customers will continue to benefit from our broad and complementary product portfolios, our dedication to providing outstanding global customer service and our strong commitment to innovation and sustainability.”

Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018.
(Photo: Archroma)
ARCHPR116a

Archroma recently acquired 100% of the shares of M. Dohmen Korea Ltd. The company’s name has been changed to Archroma Korea Ltd on April 30, 2018. (Photo: Archroma)
ARCHPR116b

On May 1, 2018, M. Dohmen USA, Inc merged into Archroma U.S. Inc. operations in the US and into Archroma Canada, Corporation in Canada.
(Photo: Archroma)
ARCHPR116c

• Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
• Support to “future-proof” medical applications
• Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

Deepak Parikh, president of region North America, Clariant comments: “Clariant’s product innovation for the US and wider North American plastics industry embraces the region’s fastest growing end-use areas of automotive and construction. It also addresses the impact of trends driven by changing consumer lifestyle preferences and market regulations on other important segments such as packaging and healthcare.”

Transportation
Clariant brings color and protection to support the increasing use of engineering plastics and high temperture resins in automotive interiors, exteriors and under-the-hood. Halogen-free Exolit® OP 1400 provides outstanding flame retardancy to polyamide parts, enhances safety with UL 94 V0 performance down to 0.4 mm and enables the molding of complex parts with no mold deposits and blooming. Exolit OP 1400 has been awarded the Clariant EcoTain®label for outstanding sustainability and performance. At the same time, Clariant offers low-halogen controlled high-performance PV Fast® pigmentswith excellent migration and weather fastness properties to meet the high requirements of today’s transportation and automotive industry. Easy processing Renol® compounds and masterbatches for engineering and high temperature resins provide heat and light stability, and flame retardancy, while maintaining critical flow properties in parts like SMT connectors. Importantly, they are available as small lots which enables customers to purchase only what they require and contribute to a reduction in their carbon footprint.

Packaging
As US packaging manufacturers explore more consumer-friendly, lighterweight and appealing solutions, Clariant is on hand to support their functionality, sustainability-related and color desires. Clariant Pigments has an innovative cooperation with Konica Minolta and matchmycolor to enable fast, precise and efficient color matching of HDPE products, using select organic PV Fast and Graphtol® pigments that comply with FDA regulations. The ColorWorks®center in Chicago is dedicated to US brand managers and designers with teams of color design experts to create color formulations faster than ever before for bottles, caps, closures and films.

According to market reports, plastic pouches are gaining share from traditional pack types in packaged food and are mainstream in home care. To support smoother and more environmentally-compatible processing especially for film applications, Clariant offers an FDA-compliant, vegetable-based powder amide wax, Licolub® FA 1, which acts as a slip and anti-block agent. It is suitable for polyolefins and PVC.

Textiles & Fiber
At NPE 2018, Clariant puts the focus on strong and colorful textiles, carpets and industrial fibers. New AddWorks® TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min. Clariant also offers a broad range of colorants for polypropylene, polyester, polyamide and acrylic fibers, featuring migration fastness, chemical stability, light- and weather-fastness.

Healthcare
Clariant supports risk control and regulatory compliance for medical polymer and pharmaceutical packaging solutions. Its Mevopur® color and performance masterbatches and compounds include a USP Class 6 line of compliant products and multiple global ISO, 87, 88, and 661.1 certifications ahead of the market deadline. Clariant also offers selected FDA-compliant organic pigments and polymer soluble dyes that meet purity migration fastness as well as toxicological properties for medical devices and pharmaceutical packaging.