From the Sector

Aachen researchers have developed the adaptive textile facade green.fACade, which was presented on 2^nd August 2018 in the Aachen Faculty of Architecture of RWTH Aachen University, Germany. green.fACade is installed in front of a building like a second skin and can permanently reduce nitrogen oxide pollution in cities.

The researchers achieve the reduction of harmful nitrogen oxides (NO and NO2) by coating the facade with titanium dioxide. Titanium dioxide acts as a photo catalyst and enables the oxidation of nitrogen oxides to form washable nitrate (NO3-). Since the facade is also greened, it contributes to the conversion of carbon dioxide into oxygen by photosynthesis. In addition, a green facade creates an optical resting point in the cityscape and reduces urban heat through evaporation cooling. The enclosed pictures demonstrate how the introduction of green.fACade can have an effect. Picture 1 shows the Aachen Central Bus Station after, picture 2 before the possible introduction of green.fACade.

green.fACade is part of the innovative research project "adaptive textile facades", which uses the special properties of textiles. Thanks to its design, textiles can let sunlight and air through, thus contributing to a modern, aesthetic building design. A new feature of the research project is that further elements such as the titanium oxide coating or sun protection elements are integrated into the textile facade and placed in front of the existing building facade. The adaptive textile facade acts independently and thus reduces energy consumption through the positive climatic effects on the building facade.

"Adaptive Textile Facade" is part of a current research series with the aim of developing innovative facade constructions that are climate-neutral and increase the comfort of local residents. The research team consists of the three RWTH fields of architecture (Faculty of Architecture, PhD student architect M.Sc. Jan Serode), medicine (University Hospital RWTH Aachen, Clinic for Ophthalmology, Prof. Dr Walter) and textile technology (Institut für Textiltechnik, Prof. Dr Gries) and was able to contribute its expertise in the best possible way.

This summer the research team was supported for the first time by the Munich architectural office Auer Weber, represented by managing director Philipp Auer: "For us architects, developments in the field of textile outer shells are a special challenge. Here, highly developed textile materials and processing methods are combined with the lightness and grace of fabrics. Adaptive textile facade elements will increasingly turn the "building shell" into a "building skin", a system that not only offers weather, heat and sun protection, but is in constant intelligent exchange with its environment".

The great importance of these topics for the public was documented by the presence of Kirsten Roßels, representative of the Department of Economics, Science and Europe of the city of Aachen.  Ms Roßels explains: "As the city of Aachen, we are delighted with the innovative and future-oriented project ideas that are being developed at Aachen University, such as the adaptive textile facade. These developments underline the importance of Aachen as a city of science and I would appreciate it if these and other technologies could also become visible in Aachen in the future".

Prof. Dr Gries from the Institut für Textiltechnik sums up: "As textile researchers, we see a great opportunity to develop concrete solutions for our urban living spaces together with renowned experts from other disciplines. I'm sure we can make the urban climate more pleasant and reduce pollution."

• Product innovations, thought-leadership and the new certifications.
• A set of strategic green actions, aimed at increasing transparency and traceability in the company and throughout the industry.

Garmon Chemicals relaunches its commitment to an increasingly green and transparent use of chemicals. The new goal for the company, which in January 2018 has become part of the US Kemin Industries group, is to embark on an actual journey towards sustainability, integrating product innovation with increasingly distinctive strategic actions.

There are three main innovations spearheading Garmon’s commitment. The partnership with the ground-breaking project Alliance for Responsible Denim in the exclusive workshop “Doctor Visits”, held in London June 12. The new ISO 14001:2015 and ISO 9001:2015 process certifications.  The innovative “Stretch Care” collection which features a whole package of eco-compatible solutions, specific for finishing in the world of stretch fabrics.

In partnership with Alliance for Responsible Denim for the “Doctor Visits” workshop
On June 12, in London, the stage was set for “Doctor Visits” an event-workshop organized by Alliance for Responsible Denim focusing on the dissemination and promotion of best practices for sustainable manufacturing. The meeting was dedicated to six selected denim brands, which had a chance to meet the greatest experts in the finishing of indigo fabric.

Garmon Chemicals made available its inimitable experience as technical partner for finishing, as well as conducting team sessions with the Jeanologia staff, a leading company for eco-sustainable technological solutions. The six brands brought the finishing recipes of their Never out of Stock styles, to receive support and recommendations from the experts about the most innovative alternatives in terms of sustainability. The goal was to show the brands new possibilities to migrate towards more responsible finishing, improving their recipes as well. This was a way to reaffirm how ecodriven innovations can also increase finished product quality.
 
The new ISO certifications: increasingly high standards
Garmon Chemicals is also pleased to announce that it has been awarded two important certifications for compliance with ISO international standards as regards safety, reliability and quality. Reference is made here to ISO 9001:2015, a certification which sets international criteria for quality management systems, and most notably, to ISO 14001:2015, a standard acknowledged worldwide stipulating all requirements for an environmental management system. This certification, in particular, helps organizations improve their environmental management performance levels through a more efficient use of resources as well as by reducing production waste. Indeed ISO 14001:2015 mandates that an organization should take into account all aspects relevant to its core business. Amongst assessed parameters there are: air pollution, managing water resources and discharge, waste management, soil contamination, mitigation and adjustment to climate change, as well as an efficient use of resources.

These certifications, once again, provide evidence of the constant commitment on the part of Garmon for an increasingly sustainable use of chemicals, aimed at truly reducing its impact on humans and the environment.
    
A commitment which comes to life in the new “Stretch Care” collection
Introduced on the occasion of the Kingpins exhibition in April 2018, the new “Stretch Care” collection is a line of products completely dedicated to enhancing the qualities and performance of stretch fabrics. The special formulations developed for this line, with their cutting-edge raw materials, are especially suited for treatments with a high eco-compatibility rate; at the same time they optimize the production process. It is worth mentioning in particular the innovative Geopower NPS (= no pumice stone), a compound which helps eliminate pumice stone from denim washings, thus reducing environmental costs and impacts. Another ground-breaking product is Avol Oxy White, the innovative bleaching agent designed to achieve localized effects on denim. Thanks to its composition it is an ecologically advanced product whose environmental impact has been reduced to a minimum, a real challenge to the use of potassium permanganate which tends to be pervasively used as part of industrial processes.

“We firmly believe in developing sustainable chemistry” – concludes Donald Mulazzani, Marketing and Business Development Director at Garmon Chemicals – “not only in terms of product, but also as evidence of our responsible approach on several levels. In this way, we want to contribute to disseminating what will need to be the best practices in the future, for the whole industry”.

Bally, the historic Swiss luxury brand is pleased to announce the appointment of two key figures to its executive team, completing the process of strategic redevelopment begun last year with the transfer of the Creative, Merchandising and Marketing offices from London to its new showroom in Milan.

Effective immediately, Eva Quirrenbach joins Bally as Chief Marketing Officer following a term in New York as Vice President of Global Brand Marketing at Tory Burch, having previously occupied strategic roles within the Tod’s Group in both Italy and the United States. Eva is a recognised expert in all aspects of international branding and marketing within the luxury sector, and with her proven understanding of consumer behaviour, she played an integral role in the development and acceleration of the digital footprint and in supporting global brand development at Tory Burch.

“Eva is an excellent addition to the Bally team. The combination of a consolidated experience and understanding of luxury brands along with her background driving the strategic development of successful global projects make her the ideal leader to drive Bally's commitment to unified commerce on a global level".
Frédéric De Narp, Bally Group CEO

Bally has moved to a three-pronged regional strategy and as such is also pleased to announce the promotion of Silvia Onofri to a new role as CEO for the EMEA region, in addition to her current role as Vice President of Global Wholesale. During her time in Bally, Silvia has obtained outstanding results entering top tier multi-brand doors around the world and increasing Bally's footprint in Travel Retail to make the brand a global leader in the field.

Silvia has extensive experience in the global fashion and luxury industry, having first joined the Bally team 10 years ago, following key marketing roles in Bulgari.

“Silvia has the unique benefit of intimately understanding the Bally brand and it’s DNA, and having proven experience in forging new relationships with the world’s leading retailers and their customers. With this invaluable expertise in hand, I am confident that she will infuse the EMEA Retail division with enthusiasm, professionalism and unique market insights to take Bally to the next level in these crucial markets” -
Frédéric De Narp.

The arrival of Eva Quirrenbach and the promotion of Silvia Onofri are part of Bally Group CEO Frédéric de Narp’s ongoing strategic vision to infuse Bally’s prestigious brand identity with heightened dynamism, appeal and allure.
Both roles report directly to Bally’s Group CEO, Frederic de Narp.

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Overseas producers respond to strong Chinese demand
As the Chinese domestic and export markets’ demand for quality technical textiles and nonwovens products continues to increase, overseas machinery brands continue to enter the country, using Cinte Techtextil China as their starting-out platform. ANDRITZ Nonwoven is just one of those who see the growing potential. “Chinese nonwovens manufacturers are increasingly requiring higher capacities and top-class quality for their nonwovens products for local and export markets,” Mr Laurent Jallat explained. “China is the biggest market in terms of installed capacity, and shows quite promising potential for the future. In the past years, we’ve seen rapid growth in products such as disposable face masks.” ANDRITZ responds to this demand with their neXline spunlace eXcelle line which features state-of-the-art TT card web forming and JetlaceEssentiel hydro entanglement units for high capacity and speed.

The DiloGroup also report an increase in demand for their products in China. “China is one of our biggest markets,” explains Mr Dominik Foshag. “We have procured huge orders from China, as Chinese customers are considering German technology more frequently nowadays. The visitor quality of Cinte Techtextil has been very good in this past, and we think this year’s fair will be also successful as we know many of our customers are going to visit.”

Oerlikon will introduce its spunbond technology to the Chinese market this year, and is expecting to conclude initial contracts at the fair due to increased demand for overseas products. “The Chinese market for nonwovens products is by far the largest and fastest growing national market. Chinese manufacturers are no longer satisfied with lower product quality, but want to exceed Western quality levels, for example. The products must now meet stricter customer requirements and legal standards, some of which are significantly higher than other international standards,” Ms Lena Kachelmaier said.

Truetzschler Nonwovens has also noticed this trend. Ms Jutta Stehr commented: “In the last two or three years, China became one of the pacemakers in the field of nonwovens used in beauty, skin care and hygiene applications. Asian markets have set new standards concerning quality in nonwovens. For instance, making disposable wipes from cotton fibres is a trend originating in Asia. The luxurious feeling of cotton combined with the requirement for eco-friendly products will further drive demand in China and elsewhere. Accordingly, Truetzschler Nonwovens anticipates more inquiries at Cinte Techtextil for its proven carding and spunlacing solutions for cotton nonwovens.”

Weaving machine supplier Itema has also noticed strong demand in China for products made in Italy. “Generally speaking, and especially for technical fabrics, imported machinery is highly evaluated and appreciated by Chinese customers. In recent years, Itema experienced significant growth in the sale of its Made-in-Italy weaving machines in China, and in other APAC countries. Imported machines are synonymous with quality and reliability, and we believe this positive trend will be constant in the future,” Mr Matteo De Micheli outlined.

Weaving machinery exhibitor highlights

• ANDRITZ Nonwoven: their specialty is technologies for drylaid, wetlaid, spunbond, spunlace, needlepunch and textile calendering. At Cinte Techtextil, they will highlight their aXcess product portfolio, which has been especially designed for medium-capacity production. ANDRITZ has developed this range to fit the demands of producers with medium-capacity requirements, particularly in emerging markets. It includes lines and individual machines for needlepunch, spunlace, wetlaid and calendering processes.
• Autefa Solutions: visitors to their booth will experience the company’s expertise as a full line supplier for carded- crosslapped needlepunch lines, aerodynamic web forming technology, spunlace and thermobonding lines. Their nonwovens lines meet customers’ requirements for quality web formation, bonding, active weight regulation and minimal maintenance.
• DILO Systems: a leader in the field of staple fibre nonwoven production lines, DiloGroup will present their latest developments at the fair, including staple fibre production lines, card feeding and cards and crosslappers & needlelooms.
• Oerlikon: they will showcase spunbond solution lines for the production of polypropylene geotextiles. According to the company, spunbond geotextile applications are on the rise as the market is increasingly demanding more efficient processes and products, which means the product requirements are often the same or greater, but with a lower raw material input. Spunbonds are progressively replacing classical carded nonwovens due to their technical and commercial benefits.
• Truetzschler Nonwovens: concentrating on solutions for producing a broad range of hygiene nonwovens including wipes at the fair, they will focus on thermobonding & spunlacing processes and the respective machinery, from fibre preparation down to winding.

Sewing machinery exhibitor highlights

• Itema: making their debut at Cinte Techtextil, they are a leading supplier of weaving machines for technical fabrics production. According to the company, they are the only weaving machine producer to offer technical textile manufacturers the top three technologies for weft insertion: Rapier, Projectile and Airjet.
• Picanol: they use their leading position as producers of weaving machines for other textile products to expand into machines for woven technical textiles by investing heavily in state-of-the-art technology, as well through the modular design of their machine platforms which allow them to serve different industry sectors effectively.
• Lindauer Dornier: featuring in the German Pavilion this edition, they offer a number of weaving machine varieties including rapier, air-jet, open reed weave (ORW) and more. Their rapier weaving machines have set the technological standard in the high quality wool textiles market for decades, and this quality will be on display at their booth with the DORNIER P1 rapier weaving machine.

Domestic brands to watch out for

In addition to these leading overseas brands, a strong line-up of Chinese machinery producers will also feature at the fair, including Changshu Weicheng Non-Woven Equipment and Shijiazhuang Textile Machinery.

• Lenzing will hold 51 percent in a future joint venture
• Largest single line dissolving wood pulp plant in the world
• Basic engineering and permitting process to be kicked off
• 43,000 hectares FSC® certified plantation secured
• Final investment decision subject to outcome of basic engineering expected in 2019

Lenzing Group, world market leader in specialty cellulosic fibers and Duratex, the largest producer of industrialized wood panels of the Southern Hemisphere, announce that they agreed on the terms and conditions to form a joint venture to investigate building the largest single line dissolving wood pulp (DWP) plant in the state of Minas Gerais, close to Sao Paulo, Brazil. This decision supports the backward integration and the growth in specialty fibers, defined in Lenzing’s corporate strategy sCore TEN.

The joint venture will investigate the construction of a 450,000 t DWP plant, which is expected to become the largest and most competitive single line DWP plant in the world. Dissolving wood pulp is the key raw material for the production of Lenzing’s bio-based fibers. For the future operation, the two companies have secured a plantation of 43,000 hectares that will provide the FSC® certified biomass. The plantation is fully in line with Lenzing’s wood and pulp sourcing policy. The basic engineering and the application for required permits and merger clearances will now be started.

Lenzing will hold 51 percent of the joint venture which will operate the mill, while Duratex’s share will be 49 percent. The estimated cash investment by the joint venture for the construction of the DWP mill is expected to be somewhat above USD 1 bn (based on current FX rates, net of generic tax refunds and the outcome of the basic engineering study). The joint venture will supply the entire volume of dissolving wood pulp to the Lenzing Group. This step is an essential milestone in the group’s ambition to grow its specialty fibers business.

“Specialty cellulosic fibers are an important contribution to make the global textile industry more sustainable. In line with our corporate strategy sCore TEN we are committed to strong organic growth in this field. We are pleased that with Duratex, a recognized leader in sustainable forestry management, we have a strong partner in this joint venture. Together we will create a very sustainable and competitive raw material base for Lenzing’s global expansion plans”, says Stefan Doboczky, Chief Executive Officer of Lenzing Group.

“Projects of this nature are the result of our strategic plan and of our team’s effort towards drawing Duratex’s future. The Company is known for its financial solidity, high quality, innovation and sustainability; the results of a history spanning over six decades. The partnership with Lenzing for the construction of the largest single line dissolving wood pulp plant in the world is an honor for Duratex. Working with Lenzing, a global benchmark in technology, high quality and corporate governance makes us very proud. We are sure that this joint venture is going to be successful”, affirms Duratex’s Chief Executive Officer Antonio Joaquim de Oliveira.

The final investment decision to build the dissolving wood pulp plant is subject to the outcome of the basic engineering studies and the approval by the respective supervisory boards.

Koch Membrane Systems, Inc. (Koch), a global leader in membrane filtration technologies, announced its PURON® Membrane Bio-Reactor (MBR) modules have been selected for the Ji’nan Wastewater Treatment Plant I and Plant II Expansion Project. Each plant will have 100,000 m3/day treating capacity. The site is located in the Shandong province, which is China’s second-most populated province, with over 100 million people. This project continues the strong presence of Koch’s PURON® MBR in various municipal and industrial wastewater treatment projects in China, demonstrating exceptional performance and creating value to clients.

Strict new discharge requirements by the Chinese government are forcing municipalities to upgrade or build their wastewater treatment plants using new technologies. PURON® MBR technology was selected for these two new plants for its reliable and consistent effluent quality, adherence to new discharge limits, and reduced footprint compared to conventional wastewater treatment technology.

These wastewater treatment plants will be built and operated by China Everbright Water Limited Co. Ltd, a company principally engaged in construction and operation of integrated environmental water services. The project is expected to be commissioned by the end of 2018.

“We have had good experience with Koch Membrane Systems PURON® MBR technology in the 55,000 m3/day Beijing Daxing Tiantanghe Waste Water Treatment Project,” said Mr. Wang Huailin, president of Jiangsu Kaimi Membrane Technology Co. Ltd, who will design, build and supply the membrane system for these plants. “Since the 2016 Beijing plant startup, the PURON® membranes have been used in an underground construction model to provide a pollution-free installation. We have been impressed with the low fouling and low operating costs from the PURON® product, due to its unique single header and central aeration design features and the process expertise Koch brings to the table.”

“Koch has developed advanced membrane solutions for the municipal and industrial market segments,” said Mr. Manny Singh, president of Koch Membrane Systems. “Unique features of our PURON® product help the market treat wastewater to meet strict discharge and reuse targets with a low cost of ownership. We are excited that Everbright Water Group recognized the benefits of our PURON® product in their existing plant and selected us for their flagship new projects.”

• Archroma joins hands with Lahore University of Engineering & Technology to foster innovative research in textiles

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals, announced it has signed a Memorandum of Understanding (MoU) with the University of Engineering & Technology (UET), Lahore, Pakistan. The MoU will pave way for cooperation initially for a five-year period.

The partnership will explore innovations in textile research with futuristic visualization for Pakistan to help the Pakistan textile industry to keep in line with the fast pace of global apparel requirements and evolutions. Both partners will jointly hold sessions to prepare students for the challenges of the textile industry through in-house training sessions, developmental projects, research in textile applications and process innovative methodologies by pioneering value additions. The students of UET will also be able to join internship placement programs at Archroma Center of Excellence at Karachi.

The MoU was officially signed at a ceremony recently held in Faisalabad by Prof. Dr. Fazal Ahmed Khalid, Vice Chancellor of UET and Mujtaba Rahim of CEO Archroma Pakistan Limited.

Speaking at the occasion, Mujtaba Rahim said: “We, at Archroma, believe in continuous improvement and challenging the status quo leading to enhance sustainable growth especially in our product lines creating value for our stakeholders. Through this initiative of mutual cooperation, we will be able to share latest knowledge and technical developments and to work together with the faculty and research team of UET. We also wish to share the innovative textile solutions of Archroma with the students enabling them to enhance their academic performance. Our MoU will go a long way in adding value in the fast growing textile segment, from education to R&D development.”

“This partnership is going to have far-reaching impact in textile research which will bear highly positive results for UET and Archroma. Our academic team has already collaborated with Archroma on projects that will have a far reaching impact on the textile industry. We are very enthusiastic about formalizing our mutual relationship and look forward to interesting research outcomes. Industrial liaison of students will create confidence and the training, internships and working sessions will benefit them in their career development,” Prof. Dr. Fazal Ahmed Khalid commented.

• “Fashion Goes Digital” takes the Lead in Fashion Technology
• Customers get Industry 4.0-ready as Lectra unveiled latest product offerings and shared insights at annual fashion VIP event

Lectra, the technological partner for companies using fabrics and leather, put theory into practice at its recent fashion event by unveiling their latest 4.0 Cutting Room to more than 100 privileged industry professionals.

“Fashion Goes Digital” drew industry stakeholders and market experts from 20 countries, who gathered at Lectra’s International Advanced Technology Center (IATC) in Bordeaux-Cestas, France, to examine the real-life application of digitalization in fashion.

While the topic of digitalization served as a backdrop for the event, there was a recurring theme at the forefront: fashion companies need Industry 4.0 technology and support in order to be more precise in meeting the evolving needs of their digitally savvy consumers.
Nick Chiarelli, Client Partner of Foresight Factory, shed light on new business opportunities for fashion, Nora Kühner, founder of Nora Kühner Fashion Design Consulting, used her designer perspective to decode the digital future of product development, and Fabrizio Fantini, founder of Evo Pricing, showed participants how machine learning could help fashion companies predict consumer demand and avoid waste.

“While speaking about the future challenges and trends in fashion and luxury, the trend now is to use analytics to drive the entire production process,” highlighted Stephen Taylor, Principal Director of Kurt Salmon.

Waruna Tennakoon, General Manager of Group Cutting, Brandix, and Ajith Perera General Manager of Mathliya Plant, MAS Kreeda, also shared their Lectra customer experience. Based in Sri Lanka, both companies have established themselves as the country’s largest apparel exporters, with Brandix specializing in producing intimate and activewear, and MAS Kreeda in sportswear.

“Thanks to the digital revolution, consumers are now more specific in their demands. This will cause a shift in mass manufacturing where there will be smaller-volume orders coming in at a faster rate. As a result, manufacturing models have to be more agile in the immediate future,” explained Ajith Perera, “I am happy to see that Lectra is already spearheading this change by providing us with the necessary technology to help us meet market demand.”

There was no better time to put digitalization into context than during “Fashion Goes Digital”.
VIP guests got a sneak preview of the brand new, fully automated cutting room solution for fashion and apparel. Lectra’s Cutting Room 4.0 is an embodiment of Lectra’s commitment to empowering its customers with the best solutions to thrive in this new digital era. This avant-garde technology leverages industry 4.0 principles to provide greater agility, throughput, cost efficiency and in particular scalability in order to respond seamlessly to small batches orders and shorter lead times.

Jean-Yves Collet, CEO of Treize Roches Couture, a high-end French womenswear manufacturer, provided a testimonial on why his company chose to be one of the first to adopt this new solution. He explained how Lectra’s latest technology would help Treize Roches speed up their artisanal production process to bring products faster to market.

“When we discussed the possibility of a made-to-order production project, we could really foresee the benefits both in terms of quality and productivity. Industry 4.0 solutions do not yet exist in garment manufacturing. This is why we have decided to develop an Industry 4.0 cutting room. This will allow us, in the preparatory stages to automate the processes as much as possible and improve quality, productivity and training time.”

“We have unveiled our strategy last year where we have identified Industry 4.0 and digitalization as our key drivers. Our goal for this event is to show that we are, indeed, living and breathing Industry 4.0 and we do have what it takes to help our customers succeed in this era. Our latest cutting room 4.0 shows that we are not just talking about the future of fashion anymore, we are living in it right now as we speak,” concluded Céline Choussy Bedouet, Chief Marketing and Communications Officer, Lectra.

At Kingpins Amsterdam, RUDOLF GROUP launches a selection of chemical auxiliaries for fashion and function as well their new HUB 1922.
The RUDOLF GROUP, not completely new to garment and denim finishing, decides to take the first steps of what will be a long and exciting journey in the field. In order to shorten the distance with both manufacturers and apparel brands and retailers it deploys two synergic initiatives:

• A refined selection of chemicals auxiliaries targeting garment finishing and delivering, in addition to current aesthetics, sophisticated functionalities that take denim to the next level in terms of both performance and enhanced quality.
• The launch of a new project that, combining German engineering and Italian style, provides solutions at the crossroad of fashion and utilitarian functionality. The project, called HUB 1922, introduces elements of unorthodox diversity and fosters collaborative environments that can be truly disruptive.

The word HUB is evocative of the main part of something where there is most activity, whereas the number, 1922, is the year of foundation of the RUDOLF GROUP and therefore symbol of heritage, tradition and significant experience. Ultimately, HUB 1922 wants to be the unmatched one-stop shopping for fashion and function, innovation and creativity in garment processing. A hub that enables continuous, synergetic, and powerful collaboration with brands and retailers to deliver disruptive innovations in the global markets.

It introduces functional chemistry in an universe that is almost entirely driven by aesthetics and the extension to other materials and product categories (such as outdoor apparel and performance wear), of knowledge and techniques developed for denim over the past 50 years. Very aware of its status of rookie and yet very determined, the project HUB 1922 begins exploring through concepts and values rooted in deep scientific knowledge, true responsibility, technical innovation and fresh creativity.
At Kingpins Amsterdam, HUB 1922 will present 3 concepts rooted in RUDOLF’s sophisticated and conscious chemistry:

• ODYSSEY: a voyage through textures and innovation, softness, comfort and signature handfeels.
• SHELTER: performance inspired by natural models for urban protection and for much reduced domestic washing.
• MEMOFLEX: A modern-day miracle preventing denim from sagging and bagging. A truly denim Botox that shows improved quality on many stretch fabrics.

Since when it was founded, almost 100 years ago, RUDOLF GROUP’s secret of success is being big enough to matter, small enough to care. Captured in this definition are an obvious desire to play a meaningful role in the textile industry and an equally palpable vocation to customer service.

Alberto de Conti, Head of Rudolf Fashion Division: “Every generation has their time to make a mark on the world. Considering the environmental emergencies in garment production and the lack of real innovation on the retail shelves, for the current generation of companies active in garment finishing that time is now.”

RUDOLF GROUP acknowledges therefore that there is an additional opportunity to responsibly further redefine the future and turns their sizeable R&D power towards refining their approach to what is fashion quintessential staple: garment and denim finishing. Through a renewed, highly responsible involvement in garment finishing and with the introduction of HUB 1922, the RUDOLF GROUP wants to send out a message of true optimism. It is about showing the entire industry that there is a blank canvas ahead and tangible difference can be made.

• Revenue increased by 5.9 percent to EUR 2.26 bn
• EBITDA up 17.3 percent to EUR 502.5 mn
• Dividend proposal of EUR 3.00/share plus a special dividend of EUR 2.00/share
• New brand strategy to generate a strong message to consumers
• Limited visibility for coming quarters

In 2017, the Lenzing Group reports its best financial performance ever with record revenue and earnings due to a better product mix and higher selling prices in combination with a generally favorable market environment.

Group revenue grew by 5.9 percent in the 2017 financial year to EUR 2.26 bn (2016: EUR 2.13 bn). Group earnings before interest, tax, depreciation and amortization (EBITDA) improved by 17.3 percent to EUR 502.5 mn (2016: EUR 428.3 mn). The corresponding EBITDA margin rose to 22.2 percent (2016: 20.1 percent). Earnings before interest and tax (EBIT) increased by 25.2 percent to EUR 371 mn, resulting in a higher EBIT margin of 16.4 percent (2016: 13.9 percent). The net profit for the year totaled EUR 281.7 mn, a rise of 23 percent from the prior-year figure of EUR 229.1 mn. Earnings per share in the 2017 financial year amounted to EUR 10.47 (2016: EUR 8.48).

The Management Board and the Supervisory Board will propose at the upcoming Annual General Meeting a stable dividend of EUR 3.00 per share plus an increased special dividend of EUR 2.00 per share (2016: EUR 1.20 per share). In total, the dividend will amount to EUR 5.00 per share, corresponding to a dividend payment to shareholders of EUR 132.75 mn.

“The Lenzing Group looks back at a very successful year 2017. We continued to implement our corporate strategy sCore TEN with great discipline and focus on our investment projects and successfully captured value in a positive market environment. Our commitment to innovation and customer centricity was underpinned by the opening of an application innovation center in Hong Kong and the creation of the new sales and marketing office in Turkey. In line with sCore TEN we decided to revamp our brand architecture and image to sharpen Lenzing’s corporate and product profiles for customers and consumers. We want to put a stronger emphasis on our ambition to make the textile and nonwoven market more sustainable”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group.

“We are very positive about our chosen strategy as it will help us to be more resilient as we expect more headwinds in the upcoming quarters”, he adds.