From the Sector

Focus on Sustainability and Climate Change

Passion for Cotton: The 35th International Cotton Conference Bremen starts on 25 March in the Hanseatic city’s historic Town Hall. But before subject-specific questions are discussed in depth in the individual sessions, the concise and inspiring keynotes by leading business experts from science and industry will draw attention to the current trends and challenges in the industry at the start of the conference. A large part of the presentations is shaped by the current discussion on environmental and sustainability issues and the resulting consequences for the global economy.

Climate Change and Sustainability

“Climate change - a storm in a teacup?” asks Kai Hughes, Executive Director of the International Cotton Advisory Committee, Washington D.C., USA, in a provocative speech. The aim of his presentation is to work out the challenges of climate change especially for agriculture and cotton production. This should form the basis for later discussion on concrete approaches and solutions within the cotton community.

With his lecture “The HUGO BOSS sustainability programme ... and what our customer has to do with it” Andreas Streubig, Director of Global Sustainability at Hugo Boss AG, Metzingen, Germany, rolls up the textile value chain from a different angle, starting at the consumer level. As a representative of a premium brand for women's and men's clothing, Streubig discusses sustainability as a strategic element of the corporate strategy and provides information on how elements of the strategy are being implemented at Hugo Boss.

Rüdiger Senft, Head of Sustainability at Commerzbank, Frankfurt am Main, Germany, looks at the changing role of banks in financing the cotton market. In addition to a general introduction to the topic of sustainability and banking regulation, Senft's presentation deals with the financing of the cotton trade from a social and ecological point of view.
The opening session on 25 March is hosted by Bill Ballenden, founder and owner of Dragontree, Swindon, UK, an online auction platform for the cotton trade. As a former cotton manager for Louis Dreyfus in Europe and Asia, Bill Ballenden has many years of experience in the industry.

Cross-Cutting Issues: Digitalisation, Gender, Value Chains

The subsequent session in the conference programme with the headline “A Wider View” is devoted to currently defining trends and important cross-cutting issues in the industry. This goes far beyond classic cotton themes.

A lecture by Mark Messura, Senior Vice President, Global Supply Chain Marketing for Cotton Incorporated, Cary, North Carolina, deals with the role of cotton in an increasingly digitally controlled supply chain. Significant keywords here are faster delivery times, vertical integration, transparency and traceability.

The presentation by Roger Gilmartin, Managing Director of Tri-Blend Consulting, Charlotte, USA, entitled “The secret recipe for timely, cost-optimised and high-quality cotton clothing” promises exciting and enlightening insights. Tri-Blend Consulting conducts studies on the performance of different cotton varieties during the entire consumption process to the finished yarn and evaluates them from an economic point of view.

Amy Jackson, from the Better Cotton Initiative, London, UK, presents ICA Liverpool's “Women in Cotton” initiative. With this commitment, the initiative aims to increase the influence of women in the cotton industry and give them a stronger voice, for example by building networks in cooperation.

Navdeep Singh Sodhi, International Strategic Management Consultant at the Gherzi Textile Organisation, Switzerland, gives an insight into the current development of the value chain for cotton, textiles and clothing in Africa. Looking ahead to the coming decades, also in view of population growth, Africa is seen as having a high potential for building economic structures to improve income and prosperity.

Thomas Schneider, Professor at the University of Applied Sciences in Berlin and active in the field of production planning and control, textile materials and materials testing will host the session. A leading light in his field, Thomas Schneider has more than 30 years of experience in scientific and application-oriented research in the textile and fibre sector, including at the Fibre Institute Bremen e.V.

Bemberg™ supports the new generation of Italian sartorial style

In Florence, Bemberg™ presents an 8-pieces tailoring collection commissioned to and developed with students of the renowned Scuola Triennale di Alta Sartoria Maschile dell’Accademia Nazionale dei Sartori in Rome as well as with prominent lining manufacturers as Brunello S.p.A., Gianni Crespi Foderami S.p.A., Tessitura Marco Pastorelli S.p.A. and Manifattura Pezzetti Srl.

“We couldn’t have started the new year in a better and most promising way!” Says TAKESHI IITAKA, president of Asahi Kasei fibers Italia. The Japanese brand of regenerated cellulose fibers has tasked students at the Accademia Nazionale dei Sartori excellences. The designers of tomorrow created 8 contemporary clothing teaming up with prominent lining manufacturers that offered premium jacquard, striped and dotted materials in vivid colors that follow the seasonal trends. Yarn dyed options made unique by impactful contemporary designs that create interesting contrasts with the tailoring proposals.

The participation at Pitti is the first of a global tour pointing to some of the most cutting edge design innovations on planet Fashion. The next appointments include ISPO in Munich and Première Vision New York.

At each appointment the company will showcase a different aspect of its multitasking and sustainable imprint.

• Bangladesh’s biggest denim expo takes place 5-6 November
• The show runs concurrently with the Sustainable Apparel Forum Bangladesh
• From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”

Lectra has been awarded by a jury of experts the Texprocess Innovation Award 2019 in the New Process category for its latest ground-breaking offer, Fashion On Demand by Lectra.

Fashion On Demand by Lectra automates the entire personalization process, from order reception and product development to the final cutting stages. Resulting from a four-year research-and-development process, the digital solution for on-demand production was developed based on Industry 4.0 principles.

"We are very proud to receive this prestigious award at Texprocess, the biggest international event for all fashion players. Fashion On Demand by Lectra allows companies to produce personalized clothing at the same speed as ready-to-wear and avoid overstocking by producing in precise quantities,” states Holger Max-Lang, President, Northern & Eastern Europe, Middle East, Lectra.

Fashion On Demand by Lectra is available in the form of two packages, one dedicated to made to measure, with pattern adjustments, and the other to customization, with product characteristic alterations. This turnkey solution automates on-demand production right from order reception to production development stages and the cutting room. Companies can define their desired product personalization criteria for each item depending on the package, and launch production processes right from the get-go, without interfering with their standard workflows.

"This innovative cloud-based platform solution ensures efficient made-to-measure and customization production processes and facilitates nearshoring for companies that offer individualized products. This technology is up and running and can be used by the fashion industry on a plug-and-play basis," say the jury experts. “Since 2011, the Texprocess Innovation Award has been honoring remarkable achievements and new developments in the Texprocess product range under two categories: new technology and new process. The winners are selected based on criteria such as degree of innovation, choice of materials and environmental sustainability."

At the Texprocess trade fair in Frankfurt/Main, Germany (May 14th to 17th 2019) VEIT Group will present on more than 400 m² the latest highlights in the areas of ironing, finishing, pressing and fusing in the garment industry as well as automotive and interior sectors.

"Pressing for Excellence" is the corporate slogan of the VEIT Group. In addition, this year's motto at Texprocess is "LOVEIT" which is a wordplay on "love it" or “love VEIT”. In the words of VEIT Group President Günter Veit: “Our motto stands for the passion that we have for the engineering of our products, our love of perfection and our devotion to our customers. This is the basis of their trust in our products. We want to offer our customers value not only now, but also for the future which we believe will be more digital and more sustainable. Both Industry 4.0 readiness, as well as the good of operator and environment are essential components of our product development efforts.”

Among the large portfolio of high-performance technology presented at the trade show, there is a significantly improved shirt finisher SF 26. With the new model SF 26, VEIT manages to further increase both the functionality and the ergonomics of the shirt finisher. For the customer, this optimisation in application technology is reflected in higher quality of the finished product and simplified operation.

Combined with the improved FS shirt folding table series – a highly successful product – VEIT offers true streamlining potential while maintaining high quality levels when folding shirts, blouses and polos in 3 versions.

Reacting to the customers’ demands, VEIT has equipped their popular BX fusing machines – BXT, the universal solution for shirts and outerwear – with a separate feeding belt and a 7” colour operating panel. These changes make the BX fully industry 4.0 ready and helps to further improve the ergonomics and energy efficiency.

In order to increase flexibility in the shaping of textiles, VEIT will present a new solution for high-quality finishing of the elbow seam in the area of BRISAY machines – the BRI 860 VC sleeve seam finish pressing machine. The 8430 universal multiform finisher was enhanced to cover an even wider range of applications. It can now also be used for finishing, among other items, also polos, T-shirts, blouses, blousons and jackets.

In addition to the innovative machine highlights, VEIT has also developed special solutions for customers' investment decisions. "More and more companies that are making investments are not only looking at the purchase price, but rather at the total lifetime cost of ownership," explains Vice President Christopher Veit. VEIT is presenting two interesting offers to meet this trend:
Customers may choose to buy a machine according to the “Pay Per Piece” system, which means that they pay for how much the machine is used, instead of a full up-front investment. This reduces the investment risk and allows more flexible reactions to especially to scalable business opportunities. Alternatively, when purchasing a machine the traditional way, customers can limit operating costs, extend the machine’s lifespan and achieve improved machine availability by signing a service contract. With its global service and partnership network, VEIT Group can offer this service worldwide.

• Innovative BCF S8 platform technology opens up new carpet yarn industry markets for Oerlikon Neumag customers

World premiere at the DOMOTEX World Trade Fair for Carpets and Floor Coverings in Hanover: between January 11 bis 14, 2019‎, Oerlikon Neumag will be showcasing its innovative new development, the BCF S8, to a wide audience for the very first time in Hall 11, Stand B36. Whether commodities or niche products – the new BCF S8 platform technology offers manufacturers of BCF carpet yarns decisive arguments for responding to constantly rising cost pressures and the trend for greater efficiency and quality in fiercely-competitive markets. World record: the system achieves never-seen-before spinning speeds and is able to simultaneously spin up to 700 filaments and produce fine titers of up to 2.5 dpf. This superlative performance is guaranteed by numerous individual innovations in the new platform and, for the first time, also in a new human-machine interface (HMI)-based control system, which opens the door to the digital age of smart carpet yarn manufacturing wide. At the ITMA ASIA 2018, the Oerlikon Manmade Fibers segment had already announced that it would be presenting revolutionary solutions in 2019 – both in hardware and software. And the DOMOTEX marks only the start.

According to manufacturer information, the new BCF S8 is the most efficient Oerlikon Neumag BCF system of all times. “We have succeeded in achieving a new level of greater productivity and even broader product diversity. These allow our clientèle to better cater to changing market requirements and achieve a competitive edge in tough market conditions”, explains Martin Rademacher, Vice President Sales Oerlikon Neumag. As a pre-taste, the machine specialists from Neumünster are serving up performance figures and results from comprehensive trials conducted at their own BCF technology center as well as from two pilot systems which have been tried and tested within the market for months now.

BCF S8 performance in numbers
With up to 700 potential filaments per yarn end, the BCF S8 is raising the benchmark considerably compared to the Oerlikon Neumag S+ BCF system (400 filaments) that has dominated the global market to date. Oerlikon Neumag guarantees fine titers of up to 2.5 dpf. Furthermore, the process speed is higher than ever before – 3,700 m/min (winder speed). This permits throughputs of up to 15 percent greater compared to predecessor technologies. Overall, system efficiency is 99 percent – almost unbeatable. True to the Oerlikon Segments Manmade Fibers segment e-save philosophy, energy savings of up to 5 percent per kilogram of yarn are achievable.

BCF S8 innovations – from straight yarn paths to large cooling drums

This comprehensive progress has been achieved with numerous smart innovations. To this end, one key element above all has been optimized. The yarn path from the spinning system to the new, large cooling drum has now been almost completely straightened. This yarn path, unique to the BCF market to date, ensures that the individual filaments are subjected to minimum friction, hence once again considerably reducing yarn breaks and optimizing the overall production process. Especially noteworthy here are the, for the first time, straight yarn inlet in the texturing head – guaranteeing superior yarn quality.

And the considerably reduced distance between the heating godet duo and the texturing head also has a positive impact on the texturing process. It ensures a more even twist to the yarn and reduces the compressed air consumption. Furthermore, the texturing chambers can be removed individually, which additionally shortens servicing times. The now closed units also provide the best possible protection for the texturing jets and lamellar chambers.

The 800-mm diameter cooling drum optimally and gently cools the filaments. And this has a positive influence on the yarn quality. The new cooling drum is now equipped with a V groove for all polymers (PET, PA6 and PP) as standard.

The RoTac3 tangling unit, already established within the market, once again reduces the compressed air consumption by around 50%, while the newly-developed Witras III-37 winder achieves production process speeds of 3,700 m/min.

First intuitively-operable human-machine interface (HMI)
The new BCF S8 is the first Oerlikon Manmade Fibers segment system equipped with the innovative human-machine interface (HMI) for intelligent controlling and monitoring. In this case, the interface between man and machine has been oriented on the daily requirements of users in BCF production. With its new ‘look and feel’, it supports intuitive operation and offers direct access to important information as well as actual and target values at each take-up position by means of a touch screen. A completely new ‘alarm philosophy’ also simplifies troubleshooting and malfunction analysis. “This smart HMI system is a logical step in the digitalization of our products”, explains Dr. Friedrich Lennemann, Vice President R&D Oerlikon Neumag.

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

• +230 companies
• 45 speakers
• +7,000 professional visits
• 49 countries represented
• 12 JEC Innovation Awards
• +450 Business meetings
• 3 Composites Tours
• Top 3 visitors’ countries: Korea - China - Japan

Gauging from the attendance of more than 7,000 professional visits from 49 countries, Eric PIERREJEAN, CEO of JEC Group, has already announced during the opening ceremony that JEC Asia 2019 will return next year on November 13, 14, 15, 2019. This ceremony was attended by industrialists, academics and officials, reflecting the huge interest that composite materials generates. Thus, at this ceremony we could notice the participation of Mr. BANG Yun Hyuk, President of KCTECH, Mr. Song, Ha Jin Jeonbuk Provincial Governor, Mr. HAN Byung Do, Senior secretary to the South Korean President for political affairs, Mr. CHOI Jin Hyuk, Director at MOTIE, Mr. KIM Yang Won, Vice Mayor of Jeonju, demonstrating the whole support of the Korean community; and Mr. Fabien PENONE, French Ambassador, was also present to underline the strong links and industrial interactions between Korea and France.

Hosting, this year again, the International Carbon Festival organized by KCTECH and the Jeonju region, JEC Asia also provided a comprehensive program dedicated to the Automotive professionals with a leadership circle attended by top stakeholders of the industry worldwide, top-notch conferences on automotive automated processes and composite applications for structural parts with speakers from Hyundai Motor Group, e-Xstream Engineering, L&L Products, Cobra International, Hanwha Advanced Materials, Daimler, Hankuk Carbon, Arkema, Cetim, Saertex & Co. KG to name a few.

“Aeronautics: 53% and beyond” conferences took place and attracted many attendees to discover new composites solutions and their wider use in this sector with Stratasys,IS Group, Cevotec… JEC Asia also offered its participants a chance to find out new business opportunities, highlighting the most relevant for the region and various application sectors.
All in all, the show floor was filled with innovations as JEC Asia 2018 showcased innovative parts and awarded 12 composites International champions among which 3 were about automotive, at the JEC Innovation Awards ceremony.

Also, to be noted at JEC Asia was the focus on networking with pre-arranged Business meetings that generated +450 qualified one-to-ones over the 3 days. Likewise, 3 composites tours opened exclusive doors to attendees when they visited Hanyang University, the composite architecture of the House of Dior, LG Hausys & Kolon and a day trip in Jeonju region and the Carbon Valley of the KCTECH.
For the first time, JEC Asia teamed up with MAI Carbon to offer a brand-new Student Program that keeps abreast of composite-industry needs to hire young, committed well-trained engineers. The two-part program included workshops with a focus on theoretical foundations and a guided tour through the JEC Asia trade show and the innovation planet.

• In its aim to promote composites materials, JEC Group will highlight the latest technologies that enable the automotive industry to innovate in product design, emission reductions and production.

Paris - In its mission to address composites end-use industries specifically, JEC Group, the world leading organization for the promotion of composite materials, moves up a gear to target the automotive industry. Introduced many decades ago in car manufacturing, and not only for high-end performance models, composites are now offering many alternatives to steel and aluminum, thanks to their specific features, which go far beyond their lightweight properties.

“Today, nearly 2.9 cars are produced and sold worldwide every second. Yet growth potential is still enormous. In value, the automotive industry makes up 20% of the total composites market with promising opportunities for lighter, stronger and more efficient materials in the years to come. They offer new design opportunities, enable a reduction in tooling investment and allow several functions to be integrated in one, on top of their corrosion and impact resistance. Furthermore, composite materials contribute to the development of a new generation of cars, offering innovative battery integration solutions for electric vehicles, as well as a new generation of fuel storage tanks for hydrogen-powered vehicles. JEC Group is moving forward in its strategy to democratize and promote the use of composites materials among end-user segments that, in this case, are OEMs and car manufacturers,” said Ms Frédérique MUTEL, JEC Group President & CEO.

The BMW i3 the largest-volume production car ever to extensively use composites for emission-free mobility

With this in mind, JEC Group will invest in a significant number of composites pavilions at key automotive events in Europe, America and Asia. The first of these will be at Mondial.Tech Paris, part of Paris Motor Show, held on October 2-6, 2018 in Paris. The composites pavilion will include an innovation showcase, expert presentations and networking activities.

The second composites pavilion will be at the North American International Auto Show in Detroit on January 14-18, 2019 and will focus on the same goals of sharing knowledge and developing networking.

Additional events, particularly in Asia, are being planned to cover the global automotive market.

Although the composites pavilions are organized by JEC Group, they will be supported by major composites manufacturers. These combined efforts will enable stands to showcase several solutions provided by composites for the automotive industry, driving innovation in this sector.

• CHIC Shanghai, March 14-16, 2018
• CHIC March 2018 closes successfully with rise in attendance
• CHIC´s new design: Discovering the young consumer world
• Successful business in all fair segments
• Service point CHIC as international platform for the international fashion trade
• New autumn date for CHIC: September 27-29, 2018

The spring edition of CHIC, taking place from March 14-16, 2018, finished successfully with yet another increase in visitor figures. 1,210 exhibitors from 21 countries and regions presented themselves on 117,200 m² at the National Exhibition & Convention Center in Shanghai. 112,666 visitors of all business channels were registered at the fair, among them leading department stores, shopping malls, multibrand stores, agents, distributors.

Chen Dapeng, President of CHIC and Executive Vice President of China National Garment Association: "The consumers in China develop rapidly, `consumer upgrade´ is the keyword, the Chinese market is consumer oriented, in demand is an individual young style. The offer has to adapt to the needs of this target group, the industry has to become even more innovative and face the technological challenges."

CHIC Shanghai shows that the Chinese market follows the current trends which is also mirrored by its fresh young design and a full visual concept that was developed in cooperation with WGSN. Addressees are the young trendsetting consumers, China´s driving force for the strong growth in retail sales, which increased by 10.2% in 2017 to about 5.7 trillion US$. According to a study by BCG this target group accounts for 65% of consumption increase in China with a predicted growth rate of 11% per year until 2021. The total domestic consumption contributed nearly 60% to the economic expansion of the country in the last year.

Intensive contacts and ordering in all areas of CHIC

The exhibitors of the designer area IMPULSES, one of the core segments at CHIC and occupying the entire North Hall, among them Hua Mu Shen, Shan Zi, Mood for Mode, were very satisfied. In addition to numerous concrete cooperation agreements high value orders were placed as well.

The international exhibitors in the FASHION JOURNEY area came from Brazil, Denmark, Germany, France, China Hong Kong, India, Italy - with 40 exhibitors again the biggest European participation - , Japan, Korea, Peru, Poland, Sweden, Spain, China Taiwan, UK. They expressed their satisfaction with their participations and recognize the potential of the Chinese market. The trade fair objective are contacts, numerous promising cooperation talks took place that need intensive follow-up after the fair. Nevertheless there were also orders placed at the fair. The Polish Investment and Trade Agency participated for the first time in CHIC with its national export program “go-to-brand”. Polish jewellery and kidswear designer brands participated in the program and exhibited at CHIC.

Showing at the leather and fur area HERITAGE the International Fur Federation (IFF) presented itself for the first time with international producers such as the auction houses NAFA and SAGA. Turkey was again represented under the roof of IDMIB / ITKIB by ten companies. For the national participants, grouped in pavilions of the respective Chinese provinces, CHIC is an essential business platform, here they regularly meet their buyers and this time once again registered orders of high sums.

Young brands in the CHIC YOUNG BLOOD area like Monkey King (after the monkey king in the classic Chinese novel The Journey to the West) with manga style shirts or JPE, a trendy street style brand with a traditional Chinese dragon being its mascot, made more than 300 contacts with concrete cooperation intentions at CHIC.

Companies in the segment URBAN VIEW, the menswear area, e.g. RUYI group with more than 30 international fashion brands such as Aquascutum or Sandro; GSON, a menswear line of SEMIR group or ManCode, a new exhibitor at CHIC, reported hundreds of cooperation inquiries and direct deals at the fair.

A sensation in the accessories segment SECRET STARS was created amongst others by the German brand LEONARDO. Large groups of visitors interested in the jewellery collection gathered at the booth. The fair participation beat the company´s expectations by far.

The young generation is the engine for fashion consumption in China, a fact also recognized by the management of the SEMIR group that presented product novelties and its service offer with its kidswear brand BALABALA in the KID´S PARADISE at CHIC. New technologies were shown on more than 500 m² by the HODO group and its "unstaffed shops", "smart fitting rooms", "magic dressing mirrors". Further innovations were "cloud shelves" and "big screen data".

Service platform CHIC

The intensively expanded visitor management, online and offline, was a central aspect of the fair. Online via WeChat and the official CHIC APP more than 200,000 visitor request for specific product groups were made, exhibitors uploaded more than 700,000 pieces of product information. Active exchange was initiated by the Buyer´s Talk on the second fair day, dealing with the development of the buying systems of department stores and shopping malls, trend information was given at CHIC Buyer´s Theme Salon also taking place on day 2. The VIP Buyer´s Meeting brought international brands and interested agents and distributors together - a service that the organizer will expand in the future. “We visit CHIC Shanghai every time, for us it´s a very important platform for trend information and also to find European brands that we can introduce to the Chinese market”, says Wen Liu, CEO Jesery from Wuhan, representative of Canadian designer brand JAC. The management of Mallstyle Investment (Shanghai), with e.g. Italian luxury brands in its portfolio, directly got in touch with German and Italian brands at CHIC after the meeting.

The event schedule of CHIC offers a broad seminar and workshop programme with its CHIC TALK, from trend information to retail solutions to buyer meetings, the show programme CHIC SHOWS staged fashion presentations, of which especially the IMPULSES and OVERSEAS´ JOINT FASHION SHOWS attracted the visitors´ attention. CHIC Shanghai is designed as a global platform for the fashion industry and fashion trade and integrates all resources that are relevant to a successful development of the fashion business in China.

CHIC Shanghai changes autumn date to September

CHIC Shanghai changes together with Intertextile Shanghai, PH Value and Yarn Expo the date for its autumn edition to September. The next fair will be held from September 27-29, 2018 at the National Exhibition & Convention Center in Shanghai.

• JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.