From the Sector

Finishing machinery specialist Monforts will exhibit at the upcoming Febratex textile machinery exhibition taking place in Blumenau, Brazil, from August 20-23, along with Uniferro, its new regional partner.

This new alliance follows the retirement of Herbert Erdmann of the service agency Euro Texteis, who has worked with Monforts over more than 30 years to secure a leading position in the region for Montex stenter dryers, Thermex dyeing ranges and associated finishing technology.

With offices in Sao Paulo and Ceara and sub-agents across Brazil, Uniferro has been active in the textile industry for over 50 years.

coaTTex
At Febratex, Monforts will introduce its latest coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating. For single-sided application with paste or foam, the versatile coater is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts Montex stenter systems.

A wide range of coatings can be applied to fabrics for providing functions such as waterproofing, liquid and gas protection and breathability, in addition to foam lamination and black-out coating.

Denim hub
Brazil remains a buoyant hub for textile manufacturing with a particular stength in the denim dyeing and finishing sector and many Monforts Thermex hotflue dyeing systems are already operational in the region, reaping the benefits of the Econtrol® process.

Econtrol® is a continuous process for the dyeing of woven cotton and cellulosic fabrics, especially denim, in which reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes.

“Differentiation is the key in the highly-competitive denim fabrics industry, whether through the successful incorporation of new fibres, accommodating new fabric constructions or exploring the many options for how to treat them at the finishing stage, to gain a market advantage,” says says Monforts Regional Sales Manager Achim Gesser. “Our lines allow users to be extremely versatile and respond quickly to market demand, while also allowing very short production runs.”

Because finishing is a particularly energy-intensive part of the textile production chain, it is exactly where convincing results can be achieved, he adds, and Monforts has developed a wide range of energy-saving. These included a range of heat recovery systems, such as the Universal Energy Tower and the ECO Booster. Both can also be retrofitted to existing ranges to make production more resource-efficient and economical, yet without having to invest in a new machine.

“Energy costs tend to be high in Brazil and can account for up to 70% of production costs for our customers, so there is great demand for ways of saving money,” says Gesser. “Cutting energy usage also helps in terms of global warming and reducing carbon footprint, of course, so these latest technologies are a win-win for fabric finishers. As we look forward to a promising partnership with Uniferro in Brazil, we would like to extend our thanks and best wishes for the future to Herbert Erdmann for his hard work over the years.”

The start to the premiere of the CHINA WAVE pavilion at Pitti Uomo 106: the first stop of the "2024 China National Garment Association Overseas Programme" was a complete success for the participating designer labels from China. The Chinese brands impressed the international fashion world with their exclusive and extraordinary collections at the Costruzioni Lorenesi in the Fortezza da Basso in Florence. The famous fashion journalist, Suzy Menkes, was also impressed by the creations.

The styles and current looks from from VALLEYOUTH, KB HONG BY K-BOXING, RAXXY, JDV, FENGGY, BLACKHEAD, KEYONE BY HATTERSHUB, TYPETAIL impressed buyers, fashionistas and media representatives alike with their design expertise, creativity and product quality. The combination of contemporary styles with traditional Chinese elements, as seen in the collections of KB HONG by BY K-BOXING, JDV and VALLEYOUTH, among others, attracted international audience from Italy, Germany, France, Great Britain, Spain, Saudi Arabia, the United Arab Emirates, the USA, Mexico, Canada, Australia and many more.

Among those welcomed to the pavilion was Suzy Menkes, who emphasised the combination of tradition and modernity in collections such as those from KB HONG by BY K-BOXING and VALLEYOUTH in the CHINA WAVE pavilion. VALLEYOUTH's new collection was presented by fashion photographer Acielle from style du monde at Vogue World, while fashion blogger Augusto Ferretti commented on the brands' designs as "artistic sculptures". The appearance of the famous Chinese actor and singer AYUNGA as a testimonial for the new KB HONG by BY K-BOXING collection at Pitti Uomo attracted particular attention.

Further stops of the "2024 China National Garment Association Overseas Programme" are Who's Next in Paris and TheOne Milano in Milan in September.

The next CHINA WAVE presentation at Pitti Uomo is planned for January 2025.

A navy blue nylon dress, providing elegance and comfort to the wearer while simultaneously highlighting the entire Made in Italy production chain: this is the new project RadiciGroup is presenting at Milano Unica, from July 9th to 11th at the Innovation Forum promoted by the TexClubTec section of Sistema Moda Italia.

The dress is the result of a traceability project led by RadiciGroup, involving different players in the textile sector: from the yarn producer to the fabric manufacturer to the final consumer.

A "tracer" has been inserted into the yarn, which is detectable through a scanner and allows to map the entire garment creation process - both physically and digitally - from the origin of the fibre to the item end of life. Through a QR code printed on the label, all the "stages" defining the outfit's journey can be seen, including the production of the fabric made by another company from Bergamo, Sitip. In this way, the final consumers can learn more about the production sites of what they wear, making more conscious purchasing choices.

At the booth of another Italian textile company, Tessitura Vignetta, visitors will be able to touch several types of fabric made with the "traced" nylon produced by RadiciGroup.

This is another example of how important it is to work transparently and collaboratively in the textile supply chain. Through the traceability of textile products, the goal is to fight counterfeiting and enhance products made in Europe, in line with the principles of the Digital Product Passport under development at the European Union.

INDA, the Association of the Nonwoven Fabrics Industry, announced that wipes leaders across the supply chain convened for new connections, intelligence, sustainability strategies, and business at the World of Wipes® (WOW) International Conference, June 17-20 in Minneapolis, Minnesota.

The winner of the World of Wipes Innovation Award® was Rockline Industries for their Facial Care Wipe with Glycine Amino Acid Complex. This new Skin Care Wipe contains a unique multifunctional complex of two medium chain glycine, a phospholipid and a blend of special glycol ingredients that provides for a multitude of skin care benefits as well as providing a unique preservation system for nonwovens. The Skin Care Wipe provides substantiated improved skin smoothness, elasticity, and hydration alongside an anti-ageing claim. This innovation is amongst the first to use these glycine ingredients in a Skin Care Wipe formulation.

In a special recognition, INDA presented the 2024 Lifetime Service Award to David Powling, Technical Leader, Kimberly-Clark Corporation (retired), and the 2024 Lifetime Technical Achievement Award to Paul Latten, Director of Research & Development & New Business, Southeast Nonwovens, Inc. INDA honors both Powling and Latten for their decades of contributions to the nonwovens industry as well as being strong advocates for INDA.

The 1.5-day WIPES Academy, led by Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC, and Paul Davies, Ph.D., Consultant, Crown Abbey, LLC, preceded the WOW Conference June 17-18. This course focused on the essentials of wet wipes construction and ingredients. Participants learned how to bring nonwovens, lotions, and packaging together to launch a successful product. The next WIPES Academy will be held July 21-22, 2025 at the Hilton Columbus Downtown, Columbus, Ohio in conjunction with WOW 2025.

The WOW conference program featured experts discussing these key topics:

• Sparkle & Shine: How Wipes Became WOW
• Wiping Smart: The Rise of Sustainable Practices in the Institutional and Industrial Wipe Markets
• Transformative Trends in Wet Wipe Formulations: A Dual Focus on Skin Health and Sustainability
• Leading Alternatives to Traditional Plastics Used in Wipes
• Panel Discussion: Leading Alternatives to Traditional Plastics Used in Wipes
• Eclectic Perspectives: Unraveling the Threads of I&I Wipes and Scaling Strategies
• Putting $$ in Your Pocket
• Recycling & Regulations

In addition to the premium content in the conference program, WOW featured four pre-conference webinars (with recordings available for full conference attendees), tabletop exhibits, Lightning Talks, a Skin Care Formulation Workshop 101, and a mentorship program for participants who are new to the wipes industry.

WOW 2025 will be held July 21-25, at the Hilton Columbus Downtown in Columbus, Ohio.

China in-store, which was established under the name C-Star as an official satellite of EuroShop in Shanghai in 2015, will be held in Hall N1 of the Shanghai New International Expo Center from 3 to 5 September 2024. In consumer-friendly and tech-savvy China innovative store design plays a prominent role, which is why the trade fair specifically focuses on instore design and high-end solutions for brands. On display will be solutions for store design, fittings, but also retail technologies that help to selectively shape stores as spaces for interacting with shoppers as well as stage their brand messages.

After the success of last year’s event attracting over 100 exhibitors and almost 14,000 trade visitors, China in-store 2024 will offer over 200 providers of retail design and retail-relevant solutions the opportunity to showcase their latest instore design, retail technology and retail solutions while inviting industry professionals to explore, learn and network. The exhibited products and solutions for shopfitting and the retail industry will include store design, materials as well as surfaces and furnishings for shops – ranging from displays fixtures and mannequins to visual merchandising services and omnichannel technologies.

Since personalisation in retail is increasing in importance, the Designer Village will present design companies with trail-blazing stand designs and visual merchandising solutions. The special area will inspire visitors with innovative store concepts that improve both the brand image and customer journey. At the Retail Technology Village the latest advances in AI, VR and data analytics will be presented. These technologies enable an omnichannel experience for shoppers and convert physical stores into third places. On the Retail Stage and the Design Stage experts, retailers and brands will present the latest retail trends, shopfitting strategies and innovations that drive the retail market. A themed exhibition is dedicated to changing trends in retail area design.  

Once again proving a highlight of China in-store will be the presentation of the ERDA China (EuroShop RetailDesign Award China) on 4 September 2024; this award recognises store designs and extraordinary store concepts from the Chinese market. This year the categories were extended. 

INDA, the Association of the Nonwoven Fabrics Industry, announced that absorbent hygiene professionals can register, sponsor, or reserve a tabletop exhibit for Hygienix™, November 18-21, Nashville, Tennessee. Industry leaders from around the world will gather for four days of networking, presentations, and business opportunities.

The theme for this year’s Hygienix is “Driving Absorbent Hygiene Product Innovation: Consumer Desires, Market Dynamics & Sustainability Solutions.” The event’s focus is on price tiering, shipping and trade impacts, FemTech, period poverty, pet care, adult care innovations, the UN Plastic Treaty and PFAS regulations.

Nominations are being accepted through Sep. 16th for the Hygienix Innovation Award™. Three finalists will be selected to present their absorbent hygiene technologies on Tues., Nov. 19th. The winner of the Award will be announced at the end of the event, Thurs., Nov. 21st.

Rund 120 Teilnehmer aus der Wäscherei- und Reinigungsbranche kamen am 04. Juni in Casablanca, Marokko, zum ersten Texcare Forum auf afrikanischem Boden zusammen. Im Mittelpunkt des Austauschs zwischen lokalen Fachbetrieben, internationalen Experten und Herstellern standen die Themen Automatisierung, digitale Technologien, Produktion, Logistik und Umweltschutz im Bereich textiler Dienstleistungen. Die Konferenz zeigte die Besonderheiten der Märkte Nordafrikas auf und bot einen Vorgeschmack auf die globale Leitmesse der Textilpflegebranche, die Texcare International, im November 2024 in Frankfurt am Main.

Die Entscheidung für Casablanca als Veranstaltungsort des Texcare Forums lag in seiner Bedeutung als wirtschaftliches Zentrum der gesamten Maghreb-Region begründet. Mit über 100 Millionen Einwohnern, einer starken Tourismuswirtschaft und einer bedeutenden Textilindustrie ist diese ein zukunftsträchtiger Standort für die Textilpflege-Branche. Gerade Marokko erwartet als Co-Gastgeber der Fußball-Weltmeisterschaft 2030 neue ökonomische Impulse.  

Im Hotel Hyatt Regency wurde den Teilnehmern neben einem spannenden Vortragsprogramm umfassend Gelegenheit zum Netzwerken geboten. Am zweiten Veranstaltungstag konnten Interessierte sich zudem auf eine Exkursion zu führenden Wäschereien der Region begeben.

Organisatoren und Partner des Forums waren neben der Messe Frankfurt der VDMA Textile Care, Fabric and Leather Technologies sowie die französische Handelskammer in Marokko (CFCIM). Als Hauptsponsor fungierte die Firma Christeyns, zu den weiteren Sponsoren zählten Kannegiesser, Tolon, Jensen, Imesa, ABS Laundry und CM2W.

Im Zentrum des Texcare Forum Casablanca stand ein umfassendes Konferenzprogramm In jeweils einstündigen Panels teilten Expert*innen ihr Wissen, beantworteten Fragen und standen anschließend für Fachgespräche zur Verfügung.

Gehalten wurden die Vorträge in französischer Sprache mit einer simultanen Übersetzung ins Englische. Die Moderation übernahm die Branchenexpertin Sandra Minette von der Texcare France.  

Das Programm war gegliedert in vier Themenblöcke:

• Unternehmensstrategie: Neue Digitalisierungs- und Automatisierungstechnologien
  Auf dem Texcare Forum Casablanca teilten die Branchenexperten Rémi Uriet (ABS LBS), Badre Bouitane (Blanchisserie Ecoblanc) und Andrea Garoia (Jensen) ihr Fachwissen zu Themen wie Arbeitserleichterung, Digitalisierung von Prozessen und vernetzten Unternehmenslösungen.
• Energie und Wasser
  Miloud Bouzziri (Christeyns Maroc), Aziz Lamrani (Blanchisserie AB Maroc) sowie Audrey und Arnaud Bretéché (Cabinet Bretagne Environnement) gaben anhand von Untersuchungen und praktischen Fallstudien Anregungen zur Verringerung der Umweltauswirkungen im Wäschereiprozess.
• Produktion und Logistik
  Hélène Ducarre (Optim Expertise), Patrik André (Maison de Blanc) und Badre Bouitane (Blanchisserie Ecoblanc) vermittelten neue Herangehensweisen zu Themen wie Wäsche-Nachverfolgung, Liefermanagement, der passenden Wahl von Materialien und Equipment sowie dem richtigen Umgang mit Saisonalität
• Interne Wäschepflege vs. Outsourcing
  Spannende Einblicke zur Optimierung des Wäschemanagements in einem Hotel, zur Mitarbeiterschulung und zur ewigen Frage: „Selbst machen oder auslagern?“ gaben Pascale Allaert (Meilleure Ouvrière de France), Jérôme Guéné (Laundry & Cleaning Consulting) und Lydie Barrand (Generalgouvernante des Hotels Royal Mansour Casablanca).

Johannes Schmid-Wiedersheim, Director Brand Management Textile Care, resümiert: „Mit dem Texcare Forum Casablanca wollten wir der boomenden Tourismusindustrie der Region sowie dem Gesundheits- und öffentlichen Sektor ein Forum zum Thema professionelle Wäschepflege anbieten und den Austausch mit Beratern und Lieferanten herstellen. Ich glaube, das ist sehr gut gelungen! Die Besucher konnten sich in kurzer Zeit auf den neuesten Stand der Verfahren zur Sicherung der Qualität, Hygiene und Nachhaltigkeit ihrer Textilien bringen. Für die internationalen Teilnehmer bot sich die Gelegenheit, den marokkanischen Markt mit seinen ganz spezifischen Chancen und Herausforderungen besser kennenzulernen. Schon beim Netzwerken vor Ort haben sich daraus sehr spannende Gespräche und vielleicht zukünftige Projekte entwickelt.“

Veronika März vom VDMA Textile Care, Fabric and Leather Technologies konstatiert: „Das Texcare Forum in Casablanca bot eine ausgezeichnete Gelegenheit, einen Einblick in den aufstrebenden Markt Marokkos für Textilpflege zu erhalten. Das abwechslungsreiche und hervorragend besetze Konferenzprogramm gab interessante Einblicke zu wichtigen Branchenthemen wie der Digitalisierung von Prozessen, der Verringerung von Umweltbelastungen und vielem mehr. Zudem boten sich ausgezeichnete Gelegenheiten zum Networking und um neue Kontakte innerhalb der marokkanischen Textil(pflege)industrie zu knüpfen.“

drupa 2024 in Düsseldorf drew to a successful close on 7 June after eleven days. 1,643 exhibitors from 52 nations presented a showcase of innovations in the Düsseldorf exhibition halls and thrilled the trade visitors with performances. The international share of the visitors was 80%, with attendees coming from 174 countries. After Europe, Asia was the most strongly represented region with 22%, followed by America with 12%.  Asia as well as Latin America and the MENA region are markets with great growth potential, which was reflected in the significant increase in exhibitors' presence and order books.

Exhibitors praised the high level of decision-making competence of visitors. They, in turn, gave top marks to the range of products and services on offer in the 18 exhibition halls. Around 96% of all visitors confirmed that they had fully achieved the objectives associated with their visit. At over 50%, most of them came from the printing industry, followed by the packaging industry, whose share has increased significantly and which was the focus of many exhibitors as a growth driver. In total, 170,000 trade visitors attended drupa 2024.

Digitalisation
Automation took centre stage at this year’s drupa, with a strong focus on AI and smart workflows, including software solutions. It became clear that digital and analogue technologies ideally complement and benefit from each other. Traditional industry leaders presented a wide range of digital solutions, while digital pioneers integrated conventional components into their offerings. Robotics played an important role in the exhibition halls and illustrated the path towards the smart factory.

Transformation and growth
drupa made it clear that the industry has great potential for the future, even against the backdrop of many challenges, and that the prospects are promising. In the last financial year, the global printing industry achieved a turnover of around EUR 840 billion (source: Smithers) and continues to develop at varying pace worldwide.
Many new strategic alliances concluded at the trade fair reflected the opportunities that are only possible in such a concentrated form at drupa.

Sustainable technologies
Technology is the key to achieving sustainability goals - exhibitors at drupa illustrated this with numerous practice-orientated developments and concrete solutions. Top priority is given to resource efficiency and the path to a functioning circular economy. In addition, Touchpoint Sustainability from the VDMA, the German Machinery and Equipment Manufacturers’ Association, showcased current state of the art innovations, presented best-practice use cases and gave a far-reaching outlook into the future of a sustainable printing industry.

Knowledge transfer
The supporting programme with its five special forums drupa cube, drupa next age (dna) and the Touchpoints Packaging, Textile and Sustainability was well received. In times of constant change and the resulting new business models, they ensured an intensive transfer of knowledge and provided important guidance. Guided tours on various key topics rounded off the trade fair experience.

The next drupa will be held in 2028.

With four months until the show opens doors, key exhibitors have already confirmed participation for the Cinte Techtextil China 2024. In conjunction with a positive global outlook, key players are eager to congregate again at the Shanghai New International Expo Centre from 19 – 21 September, to showcase innovations and connect with buyers from various sectors.
 
The fair will closely align with Messe Frankfurt’s ‘Texpertise Econogy’ – the umbrella for the group’s sustainability activities at its more than 50 textile trade shows worldwide. New energy elements, such as battery and hydrogen, will appear at the Innovation Showcase Area, on top of other interactive fringe events which centre around sustainability.

With environmental protection as one of the top sourcing categories at the previous edition, products with medical, home, protection, and building applications rounded out the top five. By product group, in-demand sourcing categories included nonwovens; technology and accessories; woven fabrics, laid webs, knitted fabrics, braidings; composites; as well as coated textiles and bondtec. The show saw 15,542 visits from 52 countries and regions last year.

Catering to various key players in 2023, the well-known Groz-Beckert East Asia brought their latest innovative needling tools for the nonwovens sector. Speaking at the show, Mr Kabilen Sornum, Vice President Asia Pacific of Marketing & E-Commerce, commented: “While we are focusing on the China market, we have also seen buyers from the Middle East, Europe, Korea, and North Asia. Cinte Techtextil China is a more international fair – we can see that everyone is here, and the quality and innovation of buyers has improved greatly in the past three to four years. E-mobility and sustainability are two very clear trends.”
 
The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the ITM 2024 International Textile Machinery Exhibition in Istanbul, Türkiye from 4th to 8th June 2024 with a full product lineup.

WHOLEGARMENT® knitting has recently gained heavy interest from the apparel industry due to the shrinking workforce of skilled sewing and linking personnel, as well as for its sustainable benefits by requiring the minimum amount of material to produce one item at a time. SHIMA SEIKI intends to gain even more interest with its new SWG-XR® flagship machine. SWG-XR® features the company's original SlideNeedle™on 4 needle beds for high quality production of WHOLEGARMENT® products using all needles, in addition to a re-designed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit before, including punch-lace patterns, variable stitch knitting and intarsia knitting. Setting new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting, SWG-XR® at ITM will be shown in 15L. The MACH2®XS WHOLEGARMENT® knitting machine, also with original SlideNeedle™ on four needle beds, will be shown in 8L. Other WHOLEGARMENT® knitting machines include the MACH2®VS V-bed machine for producing WHOLEGARMENT® items using every other needle, shown in 8 and 18 gauges, as well as the compact SWG®091N2 for producing smaller WHOLEGARMENT® items and accessories, to be shown in 10 gauge. An economical proposal in V-bed WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 machine in 24 gauge.

SHIMA SEIKI’s technology in computerized shaped knitting is represented by its N.SVR®122 computerized flat knitting machine in 14 gauge, and features such innovations as the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinkers, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Also on display will be the SCG®122SN coarse gauge machine in 3 gauge. Automatic seamless glove knitting machines will also be present, including the SFG®20 21-gauge machine, and SFG®-I in 10 gauge.

On the software side, demonstrations will be performed on SHIMA SEIKI’s SDS®-ONE APEX4 design system and APEXFiz® subscription-based design software. Each provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way the design evaluation process is improved with ultra-realistic simulation capability, whereby virtual samples replace physical sampling, consequently reducing time, cost and material that otherwise go to waste. Digital prototyping using virtual samples on SDS®-ONE APEX4 and APEXFiz® help to digitally transform the fashion supply chain for realizing sustainable manufacturing. SHIMA KnitManager™ knit production management software will also be shown to demonstrate solutions for maximizing productivity through monitoring of machine status and production progress.