From the Sector

Reset
378 results
01.09.2021

International Conference on Cellulose Fibres 2022: Plastic bans drive innovation

  • International Conference on Cellulose Fibres 2022, 2-3 February in Cologne, Germany and online – Call for Abstracts and Posters – 300 participants and 30 exhibitors are expected

Cellulose fibres are among the winners of the European 'Single-Use Plastics Directive (SUPD)', which has been in effect since July 2021 and entails plastic bans for a variety of single-use products. Cellulose is the main component of plant cell walls and a natural polymer. As a result, disposable products made of cellulose and cellulose fibres are not labelled as plastic and are explicitly excluded from the regulation. The success story of cellulose fibres will thus continue at a rapid pace with new developments and applications.

  • International Conference on Cellulose Fibres 2022, 2-3 February in Cologne, Germany and online – Call for Abstracts and Posters – 300 participants and 30 exhibitors are expected

Cellulose fibres are among the winners of the European 'Single-Use Plastics Directive (SUPD)', which has been in effect since July 2021 and entails plastic bans for a variety of single-use products. Cellulose is the main component of plant cell walls and a natural polymer. As a result, disposable products made of cellulose and cellulose fibres are not labelled as plastic and are explicitly excluded from the regulation. The success story of cellulose fibres will thus continue at a rapid pace with new developments and applications.

Building on the success of this year's conference with 200 participants, the International Conference on Cellulose Fibres 2022 will again cover the entire value chain, from lignocellulose, chemical pulp, cellulose fibres such as rayon, viscose, modal or lyocell and new developments to a wide range of applications: Textiles of all kinds, nonwovens such as wet wipes and new areas such as composites or nanocellulose in the food industry. All these sectors have gained considerable momentum in recent years.

Cellulose fibres have been a success story within the textile market with a compound annual growth rate (CAGR) between 5 and 10 % over the last ten years and similar growth rates are expected in the coming decade. This makes cellulosic fibres the fastest growing fibre group in the textile industry and also the largest investment sector in the global bioeconomy. The challenge now is to achieve a balance between the ongoing capacity expansion and the growing demand, to avoid overcapacity while still meeting rising demand from the major brands. These high growth rates are driven by the increased demand for natural fibres (and bottlenecks in cotton production), the microplastic issues, and bans on plastics in disposable applications. All three factors will continue to play an important role in the development of the sector in the future.

Companies are now invited to submit presentations as well as their latest developments for the Innovation Award.

Main topics of the conference:

  • What is the impact of plastic bans on single-use products?
  • The avoidance of microplastics and the transformation from fossil to renewable raw materials?
  • What are the biggest challenges in developing new value chains and growing market demand?
  • Which alternative raw materials for cellulose fibres are suitable and available?
  • What are the latest technology and market trends?
  • What are the future market dynamics? Who is active and interested in the cellulose fibre sector?
  • What ecosystems and partnerships are needed to promote innovation in line with new market requirements?
  • How will the political environment develop in the future?
  • How can the sustainability of cellulose fibre production be further improved?

 
Call for Abstracts
Abstract submission is open now. You are welcome to present your latest products, technologies, developments or market trends. Submit your abstract as soon as possible.
Deadline for submission: 15 October 2021
https://cellulose-fibres.eu/call-for-abstracts

Call for Posters
Deadline for submission: 31 December 2021
https://cellulose-fibres.eu/call-for-posters

Call for Innovations
More information about the innovation award and the application can be found at
Deadline for submission: 15 November 2021
https://cellulose-fibres.eu/award-application

Sponsoring Opportunities: https://cellulose-fibres.eu/sponsoring

Source:

nova Institute

01.09.2021

CELLIANT® viscose - Kelheim Fibres and Hologenix® partnering

Kelheim Fibres, a leading manufacturer of viscose specialty fibers, and Hologenix®, creators of CELLIANT®, a responsive textile using infrared technology, partnered to create CELLIANT® viscose, a combination of nature and performance.

CELLIANT viscose in blends with cotton, regular viscose, MicroModal®, lyocell and wool offers a range of varieties. Among the many applications, it is especially suitable for performance wear, luxury loungewear, casual wear, bedding, towels and beauty.

CELLIANT viscose features natural, ethically sourced minerals embedded into plant-based fibers to create infrared products that capture and convert body heat into infrared, improving cellular oxygenation.

Kelheim’s flexible technology permits targeted interventions in the viscose fiber process and delivers this fiber that provides full functionality without the need for any additional processing steps, while impressing with a softer feel and cost and time savings compared to coated fabrics.

Kelheim Fibres, a leading manufacturer of viscose specialty fibers, and Hologenix®, creators of CELLIANT®, a responsive textile using infrared technology, partnered to create CELLIANT® viscose, a combination of nature and performance.

CELLIANT viscose in blends with cotton, regular viscose, MicroModal®, lyocell and wool offers a range of varieties. Among the many applications, it is especially suitable for performance wear, luxury loungewear, casual wear, bedding, towels and beauty.

CELLIANT viscose features natural, ethically sourced minerals embedded into plant-based fibers to create infrared products that capture and convert body heat into infrared, improving cellular oxygenation.

Kelheim’s flexible technology permits targeted interventions in the viscose fiber process and delivers this fiber that provides full functionality without the need for any additional processing steps, while impressing with a softer feel and cost and time savings compared to coated fabrics.

Dominik Mayer, Kelheim’s Project Manager for Fibre & Application Development, and Courtney OKeefe, Hologenix’s Chief Supply Officer, will share the story behind the development of CELLIANT® viscose and how this first in-fiber sustainable solution on the market was developed. They will present at a webinar during the Dornbirn Global Fiber Conference Thursday, September 16, at 5:50 pm CEST.

Source:

Kelheim Fibres

Andritz AG. ANDRITZ Laroche Recycling Line
01.09.2021

ANDRITZ at INDEX20

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at INDEX20 in Geneva, Switzerland, from October 19 to 22. The broad ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, airlay, recycling, and natural fiber processing.

One highlight at INDEX will be the new member of the ANDRITZ Nonwoven division: ANDRITZ Laroche – a company that has been an important partner for ANDRITZ in the field of fiber preparation for drylaid nonwovens for over 10 years. ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers.

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at INDEX20 in Geneva, Switzerland, from October 19 to 22. The broad ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, airlay, recycling, and natural fiber processing.

One highlight at INDEX will be the new member of the ANDRITZ Nonwoven division: ANDRITZ Laroche – a company that has been an important partner for ANDRITZ in the field of fiber preparation for drylaid nonwovens for over 10 years. ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers.

One focus of this product range is complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end-uses. Customer awareness and regulations are pushing clothing brands to recycle their textile waste in their own products. Recycled fibers can also be used in the nonwovens industry for various applications, such as automotive, insulation, mattresses, and furniture felts.

Source:

Andritz AG

30.08.2021

Biden Administration Awards $6.5M Contract to US Cotton LLC

  • Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

  • Ramping Up Production of American-Made Polyester Tipped Swabs

The Biden Administration has awarded a contract for $6.5 million to U.S. Cotton LLC, the largest manufacturer of cotton swabs in the United States, to increase domestic production capability for polyester tipped swabs for home testing kits and mass testing applications to fight the COVID-19 pandemic.  Since the beginning of the pandemic, U.S. Cotton has retooled operations to produce over 400 million COVID testing kit swabs.

The Department of Defense (DOD), in coordination with the Department of Health and Human Services (HHS), announced the award today as part of the administration’s broader effort to increase domestic production capability for essential medical supplies.

U.S. Cotton, based in Cleveland, Ohio, said the company will increase its production capacity from 92 million polyester swab tips per month to approximately 371 million polyester swab tips per month by May 2022 to support domestic COVID-19 testing. The DOD contract award was funded through the American Rescue Plan Act (ARPA) to support the domestic industry base expansion for critical medical resources.

John Nims, President of U.S. Cotton said, “We are proud to be involved in a national effort to help deploy these testing kit swabs for the American people. These swabs are designed to make it easier for people at home to self-administer coronavirus tests and will also be used for mass testing applications, which is critically important. We greatly appreciate the collaboration with DOD and HHS to ramp up essential capacity of polyester-based synthetic swabs that will help in the fight against the pandemic.

“We continue to step up to meet our nation’s critical need for American-made coronavirus testing kit swabs on a massive scale. It is an honor to work with our government to help fight this pandemic and use our innovative technologies based here in the United States to fill a national and global demand for testing kits. I especially want to thank Senator Brown and Senator Portman for all their incredible support to help us retool and expand our operations in Cleveland. We can’t thank them enough for their tireless work and also want to recognize their hard working staff. As the Delta variant surges across the country, this timely investment will help in the fight against COVID by adding this much-needed, long-term surge capacity.”

Kim Glas, President and CEO of NCTO, said, “We want to sincerely thank President Biden, the Department of Defense, and the Department of Health and Human Services for leading this critical industrial expansion effort. We appreciate the administration’s commitment to expand the U.S. industrial base for these essential products.  We have a once-in-a-generation opportunity to onshore these critical supply chains long-term and we look forward to working with the administration and Congress to advance long-term solutions.”

More information:
corona virus NCTO
Source:

NCTO

Graphical material: Borealis
26.08.2021

Drinking cups using chemically recycled polypropylene

Swiss dairy company Emmi is partnering with Borealis and Greiner Packaging to produce iced coffed drinking cups using chemically recycled polypropylene.

The cups are produced by Greiner Packaging and the chemically recycled material comes from Borealis, one of the world’s leading providers of advanced and circular polyolefin solutions based in Vienna, Austria.

Emmi, Switzerland’s largest milk processor is committed to climate protection and the circular economy. The dairy company has the stated goal to make all of its packaging 100% recyclable and is committed to various measures to promote circularity such as packaging that contains at least 30% recyclate by 2027.

Swiss dairy company Emmi is partnering with Borealis and Greiner Packaging to produce iced coffed drinking cups using chemically recycled polypropylene.

The cups are produced by Greiner Packaging and the chemically recycled material comes from Borealis, one of the world’s leading providers of advanced and circular polyolefin solutions based in Vienna, Austria.

Emmi, Switzerland’s largest milk processor is committed to climate protection and the circular economy. The dairy company has the stated goal to make all of its packaging 100% recyclable and is committed to various measures to promote circularity such as packaging that contains at least 30% recyclate by 2027.

From September 2021 Emmi will use at least 100 tonnes of plastic based on the recycled material each year. Chemical recycling renews plastic back to plastic creating recycled materials with a level of purity equivalent to fossil-fuel based PP and hence, fit for protective, food-safe and other demanding applications. In this way, Emmi is utilizing difficult to recycle feedstock preventing plastic waste that would be likely landfilled or incinerated. In the future, depending on the availability of suitable material, the amount of recycled plastic in packaging is to be further increased.

The new technology to recover the polypropylene is currently still in its infancy, where Greiner Packaging and Borealis are leading the way. Only limited quantities of chemically recycled polypropylene are currently available, and Emmi is one of only a few food manufacturers to have secured a share of the chemically recycled polypropylene plastic through its early commitment and long-standing collaboration with the development companies.

The chemically recycled material used for the cups consists entirely and solely of ISCC (International Sustainability & Carbon Certification) material, on a mass balance basis. Mass balance is a methodology that makes it possible to track the amount and sustainability characteristics of circular and/or bio-based content in the value chain and through each step of the process. This provides transparency ultimately also to the consumers, enabling them to know that the product they are buying is based on this renewable material.

More information:
Polypropylen Borealis
Source:

Borealis

26.08.2021

Kelheim Fibres at Dornbirn GFC WEBINAR WEEK

  • Circular economy at Kelheim Fibres: Examples of innovation from raw material, product design and all the way to “end of life”

Kelheim Fibres, the world's first viscose fibre manufacturer with an EMAS-certified environmental management system, is continuously working on optimising its special fibres. These can be functionalised as needed - in many cases to save further processing steps (such as dyeing or coating) and thus energy, water and chemicals - and are completely biodegradable at the end of their product life in a short time (according to OECD Test 301 B).

Currently, the specialists in Kelheim are working on the development of alternative raw materials for the production of viscose fibres, such as recycled cellulose as well as other cellulose-containing starting materials. One approach to closing the product cycle in the textile sector is the use of pulp produced from recycled post-consumer waste materials.

  • Circular economy at Kelheim Fibres: Examples of innovation from raw material, product design and all the way to “end of life”

Kelheim Fibres, the world's first viscose fibre manufacturer with an EMAS-certified environmental management system, is continuously working on optimising its special fibres. These can be functionalised as needed - in many cases to save further processing steps (such as dyeing or coating) and thus energy, water and chemicals - and are completely biodegradable at the end of their product life in a short time (according to OECD Test 301 B).

Currently, the specialists in Kelheim are working on the development of alternative raw materials for the production of viscose fibres, such as recycled cellulose as well as other cellulose-containing starting materials. One approach to closing the product cycle in the textile sector is the use of pulp produced from recycled post-consumer waste materials.

In production, Kelheim Fibres focuses on resource conservation by minimising emissions and waste through closed-loop recovery systems, as well as through highly efficient energy generation and the corresponding operation of the plants.

Dr. Roland Scholz, Project Manager Fibre and Application Development at Kelheim Fibres, will present details of this on Wednesday, 15 September, at 5.50 p.m., in Hall B of the 60th Dornbirn GFC WEBINAR WEEK.


Translated with www.DeepL.com/Translator (free version)

Source:

Kelheim Fibres

Photo: Centa-Star
25.08.2021

CENTA-STAR introduces Product with CELLIANT®

Materials science innovation pioneer Hologenix, LLC, whose CELLIANT® infrared technology is an ingredient in brands across many categories, has another important partner, bedding specialist Centa-Star. Based in Stuttgart, Germany and available throughout Europe, Centa-Star has introduced a new line of “Regeneration” duvets and pillows infused with CELLIANT mineralized fibers.  

Regeneration products, thanks to CELLIANT, are thermo-regulating with maximum breathability, promoting stronger performance, faster recovery and better sleep.

CELLIANT thermo-reactive minerals absorb the body heat and convert it into infrared energy, which is reflected back to the body.  The resulting temporary increase in blood flow and local circulation helps regulate body temperature and increases tissue oxygen. This leads to a more restful, restorative sleep as well as faster recovery and stronger performance.

Materials science innovation pioneer Hologenix, LLC, whose CELLIANT® infrared technology is an ingredient in brands across many categories, has another important partner, bedding specialist Centa-Star. Based in Stuttgart, Germany and available throughout Europe, Centa-Star has introduced a new line of “Regeneration” duvets and pillows infused with CELLIANT mineralized fibers.  

Regeneration products, thanks to CELLIANT, are thermo-regulating with maximum breathability, promoting stronger performance, faster recovery and better sleep.

CELLIANT thermo-reactive minerals absorb the body heat and convert it into infrared energy, which is reflected back to the body.  The resulting temporary increase in blood flow and local circulation helps regulate body temperature and increases tissue oxygen. This leads to a more restful, restorative sleep as well as faster recovery and stronger performance.

Centa-Star Regeneration products are available online throughout Europe in selected department stores in Germany, Austria and Switzerland, including KaDeWe Berlin, Betten Rid in Munich, Karstadt or Kaufhof stores, in well-sorted furniture shops, in upscale specialist shops.

More information:
Centa-Star Bedding sleep industry
Source:

Sarah P. Fletcher Communications

(c) lululemon
18.08.2021

Genomatica partners with lululemon bring bio-nylon to apparel

  • Renewably Sourced Materials to Help Replace Petrochemicals in Apparel for a Healthier Planet

lululemon athletica inc. (NASDAQ:LULU) announced a multi-year collaboration with sustainable materials leader Genomatica to bring renewably-sourced, bio-based materials into lululemon’s products. This represents lululemon’s first-ever equity investment in a sustainable materials company and Genomatica’s largest partnership within the retail industry. Together, the two companies will create a lower-impact, plant-based nylon to replace conventional nylon, which is the largest volume of synthetic material currently used to make lululemon products.

Genomatica uses biotechnology and fermentation to convert plant-based ingredients into widely used chemical building blocks, like those used to make nylon. These building blocks are converted to pellets and yarns, and the companies will be working closely with lululemon’s fabric supply chain to incorporate this material into future products. Through this collaboration, the companies seek to create positive change within the $22B global nylon market by building more sustainable supply chains.  

  • Renewably Sourced Materials to Help Replace Petrochemicals in Apparel for a Healthier Planet

lululemon athletica inc. (NASDAQ:LULU) announced a multi-year collaboration with sustainable materials leader Genomatica to bring renewably-sourced, bio-based materials into lululemon’s products. This represents lululemon’s first-ever equity investment in a sustainable materials company and Genomatica’s largest partnership within the retail industry. Together, the two companies will create a lower-impact, plant-based nylon to replace conventional nylon, which is the largest volume of synthetic material currently used to make lululemon products.

Genomatica uses biotechnology and fermentation to convert plant-based ingredients into widely used chemical building blocks, like those used to make nylon. These building blocks are converted to pellets and yarns, and the companies will be working closely with lululemon’s fabric supply chain to incorporate this material into future products. Through this collaboration, the companies seek to create positive change within the $22B global nylon market by building more sustainable supply chains.  

More information:
lululemon Genomatica bio-based nylon
Source:

Method Communications

(c) Textile Exchange
17.08.2021

Textile Exchange: Preferred Fiber and Materials Market Report 2021 released

  • Textile Exchange report shows growth of preferred fiber and materials market needs to be accelerated
  • With post-pandemic fiber production increasing, the transition to preferred fibers and materials must be a non-negotiable decision, notes Textile Exchange.

According to a new Textile Exchange report, the market share for preferred fiber and materials grew significantly in 2020. The Preferred Fiber and Materials Market Report 2021 outlines the market for plant fibers such as cotton, hemp, and linen; animal fibers and materials such as wool, mohair, cashmere, alpaca, down, silk, and leather; manmade cellulosics (MMCFs) such as viscose, lyocell, modal, acetate, and cupro; as well as synthetics such as polyester, polyamide, and more.

  • Textile Exchange report shows growth of preferred fiber and materials market needs to be accelerated
  • With post-pandemic fiber production increasing, the transition to preferred fibers and materials must be a non-negotiable decision, notes Textile Exchange.

According to a new Textile Exchange report, the market share for preferred fiber and materials grew significantly in 2020. The Preferred Fiber and Materials Market Report 2021 outlines the market for plant fibers such as cotton, hemp, and linen; animal fibers and materials such as wool, mohair, cashmere, alpaca, down, silk, and leather; manmade cellulosics (MMCFs) such as viscose, lyocell, modal, acetate, and cupro; as well as synthetics such as polyester, polyamide, and more.

The report is a unique annual publication about global fiber and materials production, availability, and trends, including those associated with improved social and environmental impacts, referred to as ”preferred.” The comprehensive report includes quantitative data, industry updates, trend analysis and inspiring insights into the work of leading companies and organizations as they create material change.

The results show that between 2019 and 2020 the market share of preferred cotton increased from 24 to 30 percent and recycled polyester from 13.7 to 14.7 percent. Preferred cashmere increased from 0.8 to 7 percent of all cashmere produced while Responsible Mohair Standard certified fiber expanded from 0 to 27 percent of all mohair produced worldwide in its first year of existence in 2020. The market share of FSC and/or PEFC certified MMCFs increased to approximately 55-60 percent. While the market share of recycled MMCFs is only 0.4 percent, it is expected to increase significantly in the following years.

Brands’ increased interest in the use of preferred fibers and materials was also demonstrated by 75 percent increase in the total number of facilities (to 30,000) around the world becoming certified to the organization’s portfolio of standards in 2020. However, the report also notes that despite the increase, preferred fibers only represent less than one-fifth of the global fiber market. Less than 0.5 percent of the global fiber market was from pre- and post-consumer recycled textiles.

Indeed, global fiber production has almost doubled in the last 20 years from 58 million tonnes in 2000 to 109 million tonnes in 2020. While it is not yet clear how the pandemic and other factors will impact future development, global fiber production is expected to increase by another 34 percent to 146 million tonnes in 2030 if the industry builds back business as usual. If this growth continues, it will be increasingly difficult for the industry to meet science-based targets for climate and nature.

Textile Exchange aims to be the driving force for urgent climate action, and its Climate+ strategy calling for the textile industry to reduce greenhouse gas emissions by 45 percent by 2030 compared to a 2019 baseline in the pre-spinning phase of textile fiber and materials production, while also addressing other impact areas interconnected with climate such as water, biodiversity, and soil health.

Source:

Textile Exchange

12.08.2021

SGL Carbon: strong first half of 2021

  • Transformation program and improving order situation show first successes
  • Sales up 8.8% to €496.7 million compared with first half of previous year
  • Adjusted EBITDA improves by 70.7% to €71.7 million
  • Positive business development led to forecast increase on July 13, 2021

While the past fiscal year 2020 was still characterized by a Corona-related slump in orders in many business areas of SGL Carbon, demand picked up again in the first six months of 2021. Accordingly, Group sales increased by 8.8% to €496.7 million in H1 2021 (H1 2020: €456.5 million).

The Carbon Fibers and Composite Solutions Business Units particularly contributed to the €40.2 million increase in sales. Carbon Fibers contributed €166.4 million to Group sales, especially benefiting from increased demand from the automotive market segment. In the Composite Solutions Business Unit, the increase in sales of 52.4% to €60.2 million was also primarily based on the recovering demand from the automotive industry.

  • Transformation program and improving order situation show first successes
  • Sales up 8.8% to €496.7 million compared with first half of previous year
  • Adjusted EBITDA improves by 70.7% to €71.7 million
  • Positive business development led to forecast increase on July 13, 2021

While the past fiscal year 2020 was still characterized by a Corona-related slump in orders in many business areas of SGL Carbon, demand picked up again in the first six months of 2021. Accordingly, Group sales increased by 8.8% to €496.7 million in H1 2021 (H1 2020: €456.5 million).

The Carbon Fibers and Composite Solutions Business Units particularly contributed to the €40.2 million increase in sales. Carbon Fibers contributed €166.4 million to Group sales, especially benefiting from increased demand from the automotive market segment. In the Composite Solutions Business Unit, the increase in sales of 52.4% to €60.2 million was also primarily based on the recovering demand from the automotive industry.

With sales of €221.2 million, the Graphite Solutions business area contributed around 44.5% of SGL Group sales. The 3.8% increase in the division's sales was particularly due to the positive development in the important markets of the LED, semiconductor and automotive industries.

Transformation program:
The restructuring and transformation process initiated at SGL Carbon made a significant contribution to the Company's positive sales and earnings performance. In addition to leaner and more efficient structures as well as a reorganization of the business units with responsibility for results, a large number of improvements and cost initiatives in all business units and sites have contributed to the success of the ongoing transformation program.

Forecast increase:
Due to pleasing business development in the first half of the year as well as transformation successes, SGL Carbon raised its forecast for fiscal year 2021 on July 13, 2021. For the financial year 2021, the company now expects consolidated sales of around €1.0 billion (previously: €920 - 970 million). In line with developments in the first half of 2021 and the results from the transformation, adjusted EBITDA for 2021 is expected to be between €130 - 140 million (previously: €100 - 120 million). Accordingly, a slightly positive net profit is now forecasted for fiscal year 2021 (previously: €-20 million to €0).

More information:
SGL Carbon SGL Carbon SE
Source:

SGL CARBON SE

 

Foto: Pixabay
04.08.2021

Autumn Editions of Intertextile Shanghai and Yarn Expo postponed

In light of recent Covid-19 cases in China, the Autumn Editions of Intertextile Shanghai Apparel Fabrics, Intertextile Shanghai Home Textiles and Yarn Expo will be rescheduled to 9 – 11 October 2021. The fairs were originally due to take place at the end of August at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained: “To comply with the government guidelines for pandemic containment and following discussions with our stakeholders, we have made the decision to postpone the fairs from their original August timing. To allow our exhibitors and buyers as much time as possible to plan ahead, we have already confirmed new dates with the fairground for the three concurrent fairs: 9 – 11 October.”

In light of recent Covid-19 cases in China, the Autumn Editions of Intertextile Shanghai Apparel Fabrics, Intertextile Shanghai Home Textiles and Yarn Expo will be rescheduled to 9 – 11 October 2021. The fairs were originally due to take place at the end of August at the National Exhibition and Convention Center (Shanghai).

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained: “To comply with the government guidelines for pandemic containment and following discussions with our stakeholders, we have made the decision to postpone the fairs from their original August timing. To allow our exhibitors and buyers as much time as possible to plan ahead, we have already confirmed new dates with the fairground for the three concurrent fairs: 9 – 11 October.”

“I would like to thank the participants of all three fairs for their understanding and ongoing support as we continue to operate in uncertain times. We remain dedicated to providing a quality international trading platform for three sectors for the autumn / winter sourcing season, and our overseas suppliers will still be able to participate through our hybrid exhibition scheme if they are unable to be in Shanghai in-person.”

Exhibitors or visitors with any queries about these fairs should email textile@hongkong.messefrankfurt.com, or visit the fairs’ respective websites:
•    Intertextile Shanghai Apparel Fabrics: https://intertextileapparel.hk.messefrankfurt.com/
•    Intertextile Shanghai Home Textiles: https://intertextilehome.hk.messefrankfurt.com/
•    Yarn Expo: www.yarnexpochina.com

Intertextile Shanghai Apparel Fabrics is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Textile Information Centre. The co-organisers of Yarn Expo are Messe Frankfurt (HK) Ltd and the Sub-Council of Textile Industry, CCPIT. Intertextile Shanghai Home Textiles is co-organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

(c) EconCore
03.08.2021

Basaltex & EconCore: New composite of basalt fibres for rail carriage interiors

  • Testing and development achieve rigidity and safety milestone

Basaltex, pioneers in innovative uses of basalt fibres, has achieved a significant milestone in developing and testing a new composite material solution comprising fibres of basalt combined with EconCore’s patented honeycomb technology.

This new material development has greatly improved fire resistance and is highly rigid, as well as the usual honeycomb properties of light-weighting.

The company has tested the composite of basalt fibres, a bio resin and rPET honeycomb.

Filaments of only stone fibres are extruded at a temperature of 1450°C, similar to glass but with a number of advantages, not least the absence of boric acid in the process.

Combining this ecological fibre with EconCore’s sustainable technology using rPET, and the bioresin polyfurfuryl alcohol - 100% derived from a waste stream of sugar cane - make this a very sustainable and environmentally friendly product, unlike the majority of thermoset solutions in this type of application.

  • Testing and development achieve rigidity and safety milestone

Basaltex, pioneers in innovative uses of basalt fibres, has achieved a significant milestone in developing and testing a new composite material solution comprising fibres of basalt combined with EconCore’s patented honeycomb technology.

This new material development has greatly improved fire resistance and is highly rigid, as well as the usual honeycomb properties of light-weighting.

The company has tested the composite of basalt fibres, a bio resin and rPET honeycomb.

Filaments of only stone fibres are extruded at a temperature of 1450°C, similar to glass but with a number of advantages, not least the absence of boric acid in the process.

Combining this ecological fibre with EconCore’s sustainable technology using rPET, and the bioresin polyfurfuryl alcohol - 100% derived from a waste stream of sugar cane - make this a very sustainable and environmentally friendly product, unlike the majority of thermoset solutions in this type of application.

Railway applications require materials with enhanced fire resistance and the testing has shown that the EconCore-Basaltex solution fits these needs well, at the same time offering the perspective of drastic weight reduction against traditional monolithic GRPs used rather widely in train interiors.

Such sandwich panel could be deployed in applications such as cladding panels, partitions, tables and flooring. The thermoset skin layers give a fast cure at elevated temperature, meaning short cycle time and enabling automated production’.

As well as the railway interior application, this new material combination could be used in any application that requires fire performance combined with a low weight.

More information:
Basaltex basalt fibers EconCore
Source:

EconCore

03.08.2021

Asahi Kasei Spandex Europe GmbH will be discontinued by March 2022

  • "Optimizing the global strategy of its ROICA™ premium stretch fiber business"

Asahi Kasei Corporation markets premium stretch fiber (elastic polyurethane filament) under the brand of ROICA™ with superior performance features enabled by integrated production from raw material to finished yarn based on its advanced technology.

Asahi Kasei operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with numerous sales offices around the world. Asahi Kasei has now decided to restructure and optimize its global strategy in order to further improve the business performance and level of sales services.

  • "Optimizing the global strategy of its ROICA™ premium stretch fiber business"

Asahi Kasei Corporation markets premium stretch fiber (elastic polyurethane filament) under the brand of ROICA™ with superior performance features enabled by integrated production from raw material to finished yarn based on its advanced technology.

Asahi Kasei operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with numerous sales offices around the world. Asahi Kasei has now decided to restructure and optimize its global strategy in order to further improve the business performance and level of sales services.

As a part of this process, the production and sales of ROICA™ at its German subsidiary, Asahi Kasei Spandex Europe GmbH, will be discontinued by March 31, 2022.
Recognizing the importance of the European market as leading fashion market and in light of sustainable trends together with valued customers and supply chains, Asahi Kasei will continue sales, technical, and marketing services in Europe from Asahi Kasei Europe, the European regional headquarters of the Asahi Kasei Group, focusing on ROICA™ added value products manufactured at its global ROICA™ production sites.

More information:
Asahi Kasei stretch fibre ROICA™
Source:

Asahi KASEI

02.08.2021

EDANA and INDA: 2021 NONWOVENS STANDARD PROCEDURES

  • Harmonized Language Increases Efficiency to Communicate Globally Consistent Descriptions, Production and Testing

EDANA and INDA, the leading global nonwovens associations, jointly announce the launch of the 2021 edition of standard procedures for the nonwovens and related industries.

These Nonwovens Standard Procedures help technically define the nonwovens industry, with specifiers for the properties, composition, and specifications of its products. Offering harmonized language for the industry across the USA and Europe, and recognized by many other individual markets, the procedures offer a way for the nonwovens industry to communicate both across the globe, and within the supply chain to ensure that product properties can be consistently described, produced, and tested.

  • Harmonized Language Increases Efficiency to Communicate Globally Consistent Descriptions, Production and Testing

EDANA and INDA, the leading global nonwovens associations, jointly announce the launch of the 2021 edition of standard procedures for the nonwovens and related industries.

These Nonwovens Standard Procedures help technically define the nonwovens industry, with specifiers for the properties, composition, and specifications of its products. Offering harmonized language for the industry across the USA and Europe, and recognized by many other individual markets, the procedures offer a way for the nonwovens industry to communicate both across the globe, and within the supply chain to ensure that product properties can be consistently described, produced, and tested.

The harmonized methods contained in the Nonwovens Standard Procedures (NWSP) edition include 107 individual test procedures and guidance documents to support applications across the nonwovens and related industries, and are available on both www.inda.org and www.edana.org.

The 2021 edition includes updated or modified procedures with a numbering structure that makes the document intuitive to search and use. Additionally, each method also includes a page to summarize and track relevant changes made to the document. In an effort to make all methods more consistent, each one is now presented in a format building on the International Standards Organisation (ISO) template, facilitating any future possible submission to ISO in an effort to become a recognized international standard or technical specification.

As in previous editions, the table of contents for the Nonwoven Standard Procedures document includes references to existing related ISO standards, which makes it easier for technicians to choose the most relevant procedure or methods to apply to their product.

Source:

INDA / EDANA

27.07.2021

Lenzing raises outlook for current financial year 2021

The Lenzing Group recorded a significantly improved development of its operating result in the first half of 2021. The preliminary EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled year-on-year to EUR 217.8 mn (compared to EUR 95.6 mn in the first half of 2020).

The currently positive environment is still characterized by a high level of uncertainty regarding the COVID-19 pandemic. Despite the continued limited visibility, the Managing Board of the Lenzing Group raises the outlook for the 2021 financial year.

Taking into account the above factors and due to the very positive development of the first half of the year, the Lenzing Group expects the EBITDA in 2021 to reach at least a level of EUR 360 mn.

The results of the Lenzing Group for the first half of 2021 will be published on Wednesday, August 04, 2021.

The Lenzing Group recorded a significantly improved development of its operating result in the first half of 2021. The preliminary EBITDA (earnings before interest, tax, depreciation and amortization) more than doubled year-on-year to EUR 217.8 mn (compared to EUR 95.6 mn in the first half of 2020).

The currently positive environment is still characterized by a high level of uncertainty regarding the COVID-19 pandemic. Despite the continued limited visibility, the Managing Board of the Lenzing Group raises the outlook for the 2021 financial year.

Taking into account the above factors and due to the very positive development of the first half of the year, the Lenzing Group expects the EBITDA in 2021 to reach at least a level of EUR 360 mn.

The results of the Lenzing Group for the first half of 2021 will be published on Wednesday, August 04, 2021.

More information:
Lenzing AG
Source:

Lenzing AG

22.07.2021

ISKO joins the Ellen MacArthur Foundation’s Jeans Redesign project

ISKO, a global, leading premium denim ingredient brand, announced its participation in The Jeans Redesign – a project, established by the Ellen MacArthur Foundation’s Make Fashion Circular initiative, to encourage and guide the denim industry to transform the way jeans are made and move towards a circular economy for fashion.

ISKO meets the requirements for participation set by The Jeans Redesign guidelines and has made a commitment that 85% of its entire fabric production will consist of recycled material content made from pre-consumer and post-consumer recycled materials. This production will be independently verified by Textile Exchange audit bodies.

ISKO, a global, leading premium denim ingredient brand, announced its participation in The Jeans Redesign – a project, established by the Ellen MacArthur Foundation’s Make Fashion Circular initiative, to encourage and guide the denim industry to transform the way jeans are made and move towards a circular economy for fashion.

ISKO meets the requirements for participation set by The Jeans Redesign guidelines and has made a commitment that 85% of its entire fabric production will consist of recycled material content made from pre-consumer and post-consumer recycled materials. This production will be independently verified by Textile Exchange audit bodies.

This achievement is made possible using ISKO’s R-TWO™ technology which is created through a patented and exclusive yarn spinning technique that retains the unique properties and benefits found in ISKO’s statement fabrics. ISKO’s R-TWO™ is the embodiment of its Responsible Innovation™ mindset and aligns with the principles of a circular economy espoused by the Ellen MacArthur Foundation – to ensure durability, material health, recyclability and traceability. R-TWO™ positions ISKO as a sustainability leader and enables it to exceed the project guidelines to create denim that is designed to be used more, made to be made again and made from safe and recycled or renewable inputs.

More information:
Isko
Source:

menabo for ISKO

22.07.2021

Lenzing awarded platinum status for sustainability by EcoVadis

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group has been awarded Platinum status in EcoVadis’ CSR rating. The assessment comprehensively covers the four main CSR (Corporate Social Responsibility) practices: the environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

In the previous three years, Lenzing had already received outstanding ratings in all categories, and was awarded Gold status in 2018, 2019 and 2020. “We are very proud to have now achieved the step up to the Platinum level after several Gold ratings in the past few years. At Lenzing, we always think beyond fibres and take responsibility for our children and grandchildren – for whom we do our best in order to constantly improve ourselves. This attitude forms part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and to society”, notes Stefan Doboczky, CEO of the Lenzing Group.

The Lenzing Group’s ambitious climate targets form an essential part of its strategy and responsibility to future generations. In 2019, Lenzing became one of the world’s first fiber manufacturers to commit to reducing CO2 emissions per ton of product by 50 percent by 2030, and even becoming climate-neutral by 2050. The Science Based Targets Initiative, a recognised organisation in the area of climate-relevant target-setting, has scientifically validated Lenzing’s climate targets.

This scientific validation also forms one of the essential criteria that EcoVadis highlights in its rating. In addition, the responsible procurement of raw materials – according to social and ecological aspects – was also highlighted as a further core element in the company’s sustainability strategy, as well as support for external environmental initiatives (Sustainable Apparel Coalition, Fashion Industry Charter for Climate Action) and initiatives on labour and human rights issues (Sustainable Apparel Coalition).

20.07.2021

Hexcel: Speeding up new Product Development Cycles for Rassini

Hexcel, a global leader in advanced composites technologies, confirms that its HexPly® M901 prepreg system has been selected by Rassini, a Mexico-based technology leader in composite vehicle suspension systems, to speed up prototype and new product development cycles, reducing overall time to market with an easy to process material solution that enables effective early-stage design screening and cost-effective production.  

As a specialist in the mass production of composite helper leaf springs for various leading OEMs, Rassini continuously develops innovative new suspension component designs. Due to cost and timing, however, these new products cannot easily be prototyped using conventional high-pressure resin transfer molding (HP-RTM) technology.

Hexcel, a global leader in advanced composites technologies, confirms that its HexPly® M901 prepreg system has been selected by Rassini, a Mexico-based technology leader in composite vehicle suspension systems, to speed up prototype and new product development cycles, reducing overall time to market with an easy to process material solution that enables effective early-stage design screening and cost-effective production.  

As a specialist in the mass production of composite helper leaf springs for various leading OEMs, Rassini continuously develops innovative new suspension component designs. Due to cost and timing, however, these new products cannot easily be prototyped using conventional high-pressure resin transfer molding (HP-RTM) technology.

With more than 15 years of experience in delivering glass fiber prepregs for the serial production of composite leaf springs, Hexcel developed its high-performance HexPly M901 prepreg system specifically for this type of application. HexPly M901 combines the right level of structural performance required with simple processing, providing Rassini with a reliable material solution optimized for rapid development and fine-tuning iterations.

HexPly M901 is a high Tg epoxy resin prepreg system specifically developed for structural components that will be exposed to harsh thermal and environmental conditions.  With short cure cycles of 10 minutes and below producing excellent green, or handling, strength of the composite part for demolding and unidirectional glass fiber aerial weights up to 1,600gsm, HexPly M901 delivers a powerful combination of benefits for suspension component applications.

More information:
Hexcel’s HexPly® Hexcel
Source:

Hexcel Corporation

Photo: norda: DSMPMPR010
14.07.2021

norda™: Flagship product with DSM’s bio-based Dyneema® fiber

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, confirmed the introduction of the first seamless trail running shoe made with bio-based Dyneema® fiber by norda™, a Canadian shoe brand.

Designed for runners by runners, norda™ was founded under the mission to empower athletes to unlock their peak potential through innovation and cutting-edge technology. The brand’s flagship product, norda™001, utilizes bio-based Dyneema® fiber to enhance performance and sustainability in a lightweight construction.

The shoe upper is seamlessly constructed with Dyneema® fabric, which benefits from the intrinsic properties of Dyneema®, the world’s strongest fiber™. Dyneema® fiber is engineered at the molecular level to provide high strength, low weight, waterproof and breathable properties – fusing the technical performance of ultra-light materials with aesthetic design that does not sacrifice strength or durability.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, confirmed the introduction of the first seamless trail running shoe made with bio-based Dyneema® fiber by norda™, a Canadian shoe brand.

Designed for runners by runners, norda™ was founded under the mission to empower athletes to unlock their peak potential through innovation and cutting-edge technology. The brand’s flagship product, norda™001, utilizes bio-based Dyneema® fiber to enhance performance and sustainability in a lightweight construction.

The shoe upper is seamlessly constructed with Dyneema® fabric, which benefits from the intrinsic properties of Dyneema®, the world’s strongest fiber™. Dyneema® fiber is engineered at the molecular level to provide high strength, low weight, waterproof and breathable properties – fusing the technical performance of ultra-light materials with aesthetic design that does not sacrifice strength or durability.

In addition to the increased foot stability and wearer comfort of the upper, Dyneema® fibers are also used to increase abrasion resistance and stretch in the shoe laces – providing four times the level of strength when compared to standard lace materials like nylon and polyester.

“When we set out to create the norda™ 001, our mission was to design an ultra-strong and durable high performance trail running shoe, and do it as sustainably as possible,” states Willamina and Nick Martire, Co-Founders, norda™. “To achieve our goal, we had to look outside of the standard materials used by the footwear industry. We realized the properties of bio-based Dyneema® beat everything available today.”

In line with DSM’s commitment to protect people and the environment they live in, bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. Sourced from renewable, bio-based feedstock, DSM’s latest advancement in fiber technology uses the mass balance approach to further reduce the reliance on fossil fuel based resources, while still contributing to a more circular economy.

Source:

EMG for DSM

(c) Teijin Limited
13.07.2021

Teijin: Carbon Fiber Products Operations in Vietnam

TCV, Teijin’s carbon fiber business base in Vietnam, was established in May 2019. Teijin Limited announced that Teijin Carbon Vietnam Co., Ltd. (TCV) in Ha Nam, Vietnam, has started operating commercially to manufacture carbon fiber products including prepreg, a fiber sheet pre-impregnated with matrix resin as an intermediate material for composites. TCV initially will produce carbon fiber materials for sports and outdoor activities, including fishing, golf, bicycle and ice hockey goods, for markets in Southeast and South Asia and Asia-Pacific. Sales will be handled by TCV as well as carbon fiber sales affiliates of Teijin operating in these markets.

Teijin’s sales affiliates in Singapore, Shanghai and Taipei work to identify demand opportunities as well as provide customer services in Asia. Internal collaborations between these companies and TCV shall strengthen Teijin’s presence in the upstream and downstream sectors of Asia’s fast-growing markets.

TCV, Teijin’s carbon fiber business base in Vietnam, was established in May 2019. Teijin Limited announced that Teijin Carbon Vietnam Co., Ltd. (TCV) in Ha Nam, Vietnam, has started operating commercially to manufacture carbon fiber products including prepreg, a fiber sheet pre-impregnated with matrix resin as an intermediate material for composites. TCV initially will produce carbon fiber materials for sports and outdoor activities, including fishing, golf, bicycle and ice hockey goods, for markets in Southeast and South Asia and Asia-Pacific. Sales will be handled by TCV as well as carbon fiber sales affiliates of Teijin operating in these markets.

Teijin’s sales affiliates in Singapore, Shanghai and Taipei work to identify demand opportunities as well as provide customer services in Asia. Internal collaborations between these companies and TCV shall strengthen Teijin’s presence in the upstream and downstream sectors of Asia’s fast-growing markets.

Increasingly strict environmental measures and the upgrading of environmental frameworks, such as sustainable development goals (SDGs) and the Paris Agreement, are expected to stimulate greater use of lightweight and highly rigid carbon fiber. Demands are growing in Asia, especially in the fields of sports and outdoor activities, industry and aerospace. COVID-19, for example, has led to new trends in sports and outdoor activities, such as renewed interest in fishing due its compatibility with social-distancing protocols.

Source:

Teijin Limited