From the Sector

• 18+ metric tons of aniline are estimated to have been removed from the denim supply chain in about 3 years⁽²⁾.
• That represents 300'000'000+ pairs of jeans free of aniline, with 18'000+ garment workers, and aquatic life, protected from its toxicity⁽²⁾.

Archroma celebrates nearly 3 years of successfully converting the denim industry to aniline-free⁽¹⁾ pre-reduced liquid indigo.

Archroma launched its aniline-free⁽¹⁾ Denisol^® Pure Indigo in May 2018⁽³⁾.

Aniline is a key ingredient to make the indigo molecule. Unfortunately, during this process some aniline impurities are carried through into the indigo dyestuff. When the indigo is dyed on the fabric, a lot of the aniline impurity is locked into the pigment in the fabric. The remainder of the aniline impurity, approximately 300 metric tons annually, is discharged during dyeing. This can be an issue as aniline is toxic to aquatic life. In addition, exposure levels to factory workers can be high. The new Denisol^® Pure Indigo 30 liq was therefore developed as an aniline-free⁽¹⁾ indigo solution for designers, manufacturers and brand owners who long for authentic indigo inspiration.

Since the launch of Denisol^® Pure Indigo, several denim manufacturers, such as front-runner Absolute Denim, as well as Advance Denim, Azgard 9, Kilim Group, Nuevo Mundo, Rantex, Shasha Denim and Tuong Long, have taken the matter in their hands and converted their production or dedicated lines to aniline-free denim to brands and retailers.

The innovation is also supported by denim partners such as Be Disobedient and The Denim Window.

Archroma evaluates that, based on the total quantity of Denisol^® Pure Indigo sold until its introduction, its partners helped remove almost 18 metric tons of aniline from the denim supply chain. That represents an equivalent to about 300’000’000 pairs of jeans free of aniline and more than 18’000 garment workers protected from its toxicity⁽²⁾.

(1) Below limits of detection according to industry standards (tested & proven).
(2) Based on 15 minutes of work to produce one pair of jeans, produced over 8-hour working days and 300 working weeks per year.
(3) For the launch press release, click here.

• Swiss weaving machinery manufacturers are in the forefront of novel application development

Shoes and electronic calculators are probably not the first products people would associate with the textile weaving process. But they certainly signpost the future for woven fabrics, as two examples of the ever-wider possibilities of latest technology in the field. Fashion and function already combine in the increasing popularity of woven fabrics for shoes, and this is a present and future trend. Calculators in fabrics? That’s another story of ingenious development, using so-called ‘meander fields’ on the back and keys printed on the front of the material.

These glimpses of the outlook for modern weavers are among the highlights of developments now being pioneered by Swiss textile machinery companies. All weaving markets require innovation, as well as speed, efficiency, quality and sustainability. Member firms of the Swiss Textile Machinery Association respond to these needs at every point in the process – from tightening the first thread in the warp to winding the last inch for fabric delivery. They also share a common advantage, with a leading position in the traditional weaving industry as well as the expertise to foster new and exciting applications.

Technology and research cooperation
The concept of a ‘textile calculator’ was developed by Jakob Müller Group, in cooperation with the textile research institute Thuringen-Vogtland. Müller’s patented MDW® multi-directional weaving technology is able to create the meander fields which allow calculator functions to be accessed at a touch. A novel and useful facility, which suggests limitless expansion.

Today, the latest woven shoes are appreciated for their precise and comfortable fit. They score through their durability, strength and stability, meeting the requirements of individual athletes across many sports, as well as leisurewear. Stäubli is well known as a leading global specialist in weaving preparation, shedding systems and high-speed textile machinery. Its jacquard machines offer great flexibility across a wide range of formats, weaving all types of technical textiles, lightweight reinforcement fabrics – and shoes.

It’s possible to weave new materials such as ceramics, mix fibers such as aramid, carbon and other, and produce innovative multi-layers with variable thicknesses. Such applications put special demands on weaving machines which are fulfilled by Stäubli high-performance TF weaving systems.

Great weaving results are impossible without perfect warp tension, now available thanks to the world-leading electronic warp feeding systems of Crealet. Some market segments in weaving industry today demand warp let-off systems which meet individual customer requirements. For example, the company has recognized expertise to understand that geotextile products often need special treatment, as provided by its intelligent warp tension control system. Individual and connective solutions are designed to allow external support via remote link. Crealet’s warp let-off systems are widely used in both ribbon and broadloom weaving, for technical textiles applied on single or multiple warp beams and creels.

Functional, sustainable, automated
Trends in the field of woven narrow fabrics are clearly focused on functionality and sustainability. The Jakob Müller Group has already embraced these principles – for example using natural fibers for 100% recyclable labels with a soft-feel selvedge. It also focuses as much as possible on the processing of recycled, synthetic materials. Both PET bottles and polyester waste from production are recycled and processed into elastic and rigid tapes for the apparel industry.

For efficient fabric production environments, it is now recognized that automated quality solutions are essential. Quality standards are increasing everywhere and zero-defect levels are mandatory for sensitive applications such as airbags and protective apparel.

Uster’s latest generation of on-loom monitoring and inspection systems offers real operational improvements for weavers. The fabric quality monitoring prevents waste, while the quality assurance system significantly improves first-quality yield for all applications. Protecting fabric makers from costly claims and damaged reputations, automated fabric inspection also removes the need for slow, costly and unreliable manual inspection, freeing operators to focus on higher-skilled jobs.

Smart and collaborative robotics (cobots) offer many automation possibilities in weaving rooms. Stäubli’s future oriented robotics division is a driver in this segment with first effective installations in warp and creel preparation.

Control and productivity
Willy Grob’s specialized solutions for woven fabric winding focus on reliable control of tension, keeping it constant from the start of the process right through to the full cloth roll. Continuous digital control is especially important for sensitive fabrics, while performance and productivity are also critical advantages. In this regard, the company’s large-scale batching units can provide ten times the winding capacity of a regular winder integrated in the weaving machine.

The customized concept by Grob as well as design and implementation result in great flexibility and functionality of the fabric winding equipment – yet another example of Swiss ingenuity in textile machinery.  
There is even more innovation to come in weaving – and in other segments – from members of the Swiss Textile Machinery Association in future! This confident assertion is founded on an impressive statistic: the 4077 years of experience behind the creative power of the association’s member firms. It’s proof positive that their developments grow out of profound knowledge and continuous research.

International technology Group ANDRITZ has received an order from Pureko Sp. z o.o. to supply a needlepunch line for their plant in Myszków, Poland. The line will process recycling fibers from garment waste for the production of technical felts dedicated to furniture and geotextile applications. The final products will have fabric weights ranging from 300 to 500 gsm, and the production capacity will be up to 750 kg/h. Installation and start-up are scheduled for the third quarter of 2021.

The ANDRITZ scope of supply includes a complete neXline needlepunch eXcelle line – from web forming to needling – as well as engineering and ANDRITZ’s recently launched scanning gauge.

This is the second ANDRITZ line to be supplied to Pureko, thus demonstrating the strong partnership between both companies. Three years ago, Pureko invested in a new, modern plant supplied by ANDRITZ Asselin-Thibeau to produce fluffy nonwovens used in the furniture, textile, and clothing industries. The new line will enable Pureko to continue its ongoing growth.

Founded in 2009, Pureko is one of the most important producers of nonwovens in Poland. The company’s nonwoven products are mainly used for wadding; they are free of chemicals, do not involve any health hazards, and are hypoallergenic. Pureko’s products carry top certificates such as INTERTEK, FIRA, OEKO-TEX, and the National Institute of Hygiene.

• Major Monforts denim customers continue to pioneer new initiatives that are pushing the boundaries of sustainable production.

Recycling their cotton waste has become one way these companies can do more with less, and at the recent Kingpins24 Flash online event, Sedef Uncu Aki, director of Orta, headquartered in Istanbul, Turkey, announced a new partnership with leading recycling operation Gama Recycle.

Traceable
“Through this local partnership we will supply the waste from our spinning mills and return around 3,000 tons of premium quality cotton back to them,” she said. “We have established a truly controlled and traceable system and partnering with a domestic recycling centre is important because a lot the carbon emissions associated with recycling usually come from transportation.”

Orta’s ZeroMax range meanwhile uses no cotton at all, being based on Lenzing’s Tencel cellulosic fibre, while the company’s involvement in denim production for a recent launch by Levi Strauss, of jeans made with organic cotton and Circulose – a breakthrough material developed by re:newcell of Sweden and partners – was hailed as a further step forward.

To make Circulose, re:newcell repurposes discarded cotton textiles, such as worn-out denim jeans, through a process akin to recycling paper. The incoming waste fabrics are broken down using water. The colour is then stripped from these materials using an eco-friendly bleach and after any synthetic fibres are removed from the mix, the slurry-like mixture is dried and the excess water is extracted, leaving behind a sheet of Circulose. This sheet is then made into viscose fibre which is combined with cotton and woven into new fabrics.

Circular Park
Omer Ahmed, CEO of Artistic Milliners also announced plans for his company’s new 70,000 square-foot Circular Park in Karachi, Pakistan, at Kingpins24 Flash.

Once complete, this will add three million square metres of additional denim capacity a month to the company’s production and take its total recycled output to a monthly five million metres.
Ahmed observed that there is currently a lack of sustainable fibres that are readily available to use for denim production at scale.

“Organic cotton is too expensive, and in my opinion always will be,” he said. “Cottonised hemp is also not cheap and it’s hard to mix with cotton, while the new regenerated cellulose fibres that are now emerging are promising, but currently in short supply. Recycled polyester is meanwhile still based on petroleum resources which we want to move away from. As a consequence, there are only a few other options for us as a manufacturer and this new project will help us minimise our own waste while significantly lowering our carbon footprint.”

Other Monforts denim customers to introduce cotton fibre recycling operations at their plants recently include AGI Denim, Bossa and Soorty.

Vertical savings
Refresh is the name of the latest collection from AGI Denim – reflecting the company’s significant reduction in water consumption.

The company has just opened new fibre spinning and denim mills at its complex in Karachi, Pakistan.

“Over the years we’ve gone through a series of backward integration steps to become fully vertical,” said AGI Denim executive director Ahmed Javed, at Kingpins24 Flash. “In our latest expansion, we revisited every step of the production processes in order to make resource savings.”

Innovations have included the installation of proprietary robotics for garment finishing, but the most attention has been paid to water savings.

“Pakistan is one of the largest cotton-producing companies in the world and we’re fortunate that the type of cotton that is grown here is well suited to denim production and also helps us lower our carbon footprint, with everything done in close proximity,” Javed said. “In the lifecycle of a pair of denim jeans, however, cotton fibre production contributes 68% of water consumption. While we cannot control how much water cotton needs for it to grow, we can rethink the way we use it in our factory.”

Refresh-branded denims are washed from 100% recycled water as a result of the company’s new wastewater treatment plant, which puts production wastewater through a series of steps beginning with equalisation, followed by aeration and concluding with sedimentation. The water travels through filtration and ultrafiltration systems before being subjected to an activated carbon system and finally a reverse osmosis system to reduce any dissolved salts.

AGI now recycles 4.4 million gallons of water each month – enough to wash a million pairs of jeans.

Sustainable
Monforts has a leading position in the field of denim finishing with its well proven Thermex continuous dyeing systems, Montex stenter dryers and other lines for resource-efficient and economical processing.

“Our denim partners are constantly setting themselves new goals in respect of sustainable production – and more importantly, achieving them,” says Hans Wroblowski, Monforts Head of Denim. “We work closely with them with the aim of constantly optimising processing parameters and achieving further savings in energy, water and raw materials throughout the dyeing and finishing stages of production.”

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing. The CYD system integrates new functions and processes into the weaving preparation processes to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre in Mönchengladbach, Germany.”

In 2020, the number of GOTS certified facilities grew by 34% globally, to a new high of 10,388 from 7,765 in 2019. 16 GOTS Approved Certification Bodies report that over 3 million people in over 72 countries were working in GOTS certified facilities.

Significant increases are seen in all regions. Top 10 countries for certified facilities are India (2,994), Bangladesh (1,584), Turkey (1,107), China (961), Germany (684), Italy (585), Portugal (449), Pakistan (391), USA (167) and Sri Lanka (126).
GOTS approved chemical inputs now number 25,913, an increase of 13% in 2020. This confirms that these inputs are increasingly used as a risk management tool by wet processors to satisfy legal and commercial residue requirements.

“The exceptional increase in this unprecedented year shows that decision makers value GOTS as an important tool to drive sustainable transformation in a comprehensive way - from field to fashion. Using organic fibres and processing them under strict GOTS criteria definitely provides a credible and strong base for market players to be successful in the future” says GOTS Managing Director Claudia Kersten.

GOTS version 6.0, to be implemented from 1 March 2021, includes stricter social and environmental criteria. Certified Entities will now have to calculate the gap between wages paid to 'Living Wages'  and will be encouraged to work towards closing this gap. Specific references to OECD Due Diligence Guidance and Good Practice Guidance for Social Criteria and Risk Assessment as well as Ethical Business Practises have been explicitly included.

Since 2014, Iluna Group Srl stands out for braiding together the values of beauty, innovation and responsibility.
The company achieved this with Iluna Lab, a cutting-edge research and development centre where laces are conceived and engineered to become sustainable ingredients for the contemporary wardrobe.
The smart values are attested by the STeP - Sustainable Textile Production by Oeko – Tex® certification for its ethic approach. “We are also the first lace producer to have gained the GRS - Global Recycled Standard for transformed products, and whose products are all certified OEKO-TEX® Standard 100.” Comments Walter Colombo, Technical Director at Iluna Group Srl.
 Moreover, in recognition of the great value of responsible innovation, Iluna Group is now officially a partner of C.L.A.S.S., the international ecohub founded in 2007 by Giusy Bettoni, a reference point in the fashion and textile sector for all those who want to make fashion smarter.

Now the company announces two important collaborations with Néné Paris and NOO, “two booming French brands which have intercepted and share our values and vision for sustainability where beauty and innovation are key”.

Néné focuses on preserving natural resources using only upcycled fabrics or fabrics made with recycled fibers. Each and every step of the production is entirely made in Europe.

French independent designer brand NOO creates exquisite lingerie, timeless ready-to-wear garments and bold cut swimwear and bodysuit for women. The brand pays extreme care to aesthetics and details at every step of the production process, from sourcing materials to waste reduction, choosing factories and using recyclable packagings.

• C.L.A.S.S. launches the Manifesto for Responsible Fashion and kicks off the CALL TO ACTION of C.L.A.S.S. ICON 2021
• What does it mean to be a “game changer” in green fashion?
• What are the false myths of eco-fashion and what are the guidelines for innovating while safeguarding the planet? And how do you tell the story behind a sustainable fashion collection?

An annual competition to reward a visionary creative who combines design, responsible innovation and communication, capable of raising contemporary consumer awareness of the new values of sustainable fashion. This is the Call to Action launched to find the C.L.A.S.S. ICON 2021 by Giusy Bettoni of C.L.A.S.S. in the Smart Voices panel "C.L.A.S.S. ICON: Award and Manifesto for Responsible Fashion", moderated by the green journalist Diana de Marsanich, and starring, on the 10th February, the fashion designer Gilberto Calzolari, recipient of the international award for creative visionaries in the world of fashion C.L.A.S.S. ICON Award 2020, and Federico Poletti, Marketing and Communication Director of WHITE SHOW.

C.L.A.S.S. Manifesto  

During the Smart Voice, the C.L.A.S.S. Manifesto for Responsible Fashion, the 2021 edition of the C.L.A.S.S. ICON competition and the Sustainability Formula were presented.

C.L.A.S.S. ICON Award is an international award for visionary creatives in the fashion world who are able to convey the values of sustainability not only to fashion professionals, but also to the wider public: consumers. "We created C.L.A.S.S. ICON to reward visionary designers who create their collections by combining design, innovation and responsibility and who are able to communicate the values behind their garments authentically and effectively to consumers. It's time for storymaking and storytelling to align, otherwise it's just greenwashing" says Giusy Bettoni.

From 15th of February to 15th of April it will be possible to apply by sending an email to classicon@classecohub.org, with a description and objectives of the brand, the sustainability values adopted and the strategy, the designer's profile, a photo-video story of the latest collection, and any previous awards won (all info on http://www.classecohub.org).

During the panel, designer Gilberto Calzolari, the first winner of the first C.L.A.S.S. ICON Award, shared his vision for responsible fashion and his current projects. "My brand is a laboratory of experimentation. I create fashion to open conversations and change the way people behave and think. My creativity, from the choice of fabrics and processes to the image I decide to communicate, are the weapons at my disposal. Since the beginning, I have been really excited to team up with C.L.A.S.S. in order to share a common and challenging journey, with the perspective to be part of a constantly growing network activating mutual support. I have always thought at my collections as a call to action for a better future and now more than ever my mission as C.L.A.S.S. ICON is to make people understand that commitment and sustainability can and must go hand in hand with beauty and elegance. The adage 'kalòs kai agathòs' is one of the classical teachings that should never be forgotten: aesthetics, in my opinion, is inseparable from ethics. That's why I don't just target professionals, but also the end consumer, fashionistas and beyond" says Gilberto.

"For the first edition of C.L.A.S.S. ICON in 2020 Gilberto was decreed as our chosen one, and the path together was sanctioned at that moment: the sharing of values and visions is an indissoluble bond that keeps us united over time. Like Gilberto, each ICON will be part of a community where together with C.L.A.S.S. will try to make a real smart fashion and above all create an important voice," says Giusy Bettoni.

In support of the C.L.A.S.S. ICON award, C.L.A.S.S. presented its Manifesto for Responsible Fashion, which summarises the values that C.L.A.S.S. has been researching, communicating and developing since 2007: the role of the ethical company and its transparent production, the importance of traceable and healthy products, with total respect for people and the environment. A commitment to a circular economy with a positive impact that also means safeguarding the seas, the ocean, the use of water, energy and resources.

"A Manifesto for fashion with the lowest possible impact on the planet and on people and animals’ health thanks to responsible innovation, perfectly up to the challenges of contemporary lifestyle. This is why I created the Sustainability Formula, which only exists when there is design, responsible innovation and we are able to track and measure the impact of products and processes and communicate the new values in an appropriate way. In a word, when there is knowledge" concludes Giusy Bettoni.
 
F = D x I x S x C
F= Fashion
D=Design
S=Sustainability
C=Communication

• The Bavarian Kelheim Fibres GmbH has become the first viscose fibre manufacturer worldwide to receive EMAS certification.

“Our aspiration is that our fibres offer an eco-friendly and high-performance alternative to synthetic materials”, says Craig Barker, CEO at Kelheim Fibres. “So, it’s not enough that our fibres are made from renewable resources and that they are fully biodegradable – our environmental awareness must include the whole production process and all that goes with it if we want to safeguard our credibility.

The EMAS certification proves that we take this responsibility seriously.” EMAS stands for “Eco Management and Audit Scheme” and is a standardised eco management certification system developed by the European Union. EMAS includes the globally applicable ISO 14001 standard and goes beyond its requirements by demanding more transparency and continuous improvement: Certified companies report in their annual EMAS Environmental Statement on their environmental goals and their progress in meeting them.

During the audit preceding the certification, the independent environmental auditor thoroughly investigated all departments of the company, from the production itself to the company canteen. He found no non-conformances and was impressed by the competence and the high sense of responsibility among Kelheim’s employees. In contrast to the EU Ecolabel and similar certifications, EMAS does not apply to individual products or services, but certifies the complete environmental performance of the company. This benefits not only the protection of the environment and climate, but also the improvement of a company’s ecoefficiency.

Craig Barker: “An efficient environmental management system ensures that economy and ecology go hand in hand – that gives us a decisive competitive edge.”

BÖNNIGHEIM - Textile testing and research partner Hohenstein has reason to celebrate: this year marks the company’s 75th anniversary. Now in its third generation of family ownership, the company will spend this landmark year expanding its foundation for the future. Owner Prof. Dr. Stefan Mecheels is proud: "Our motto, We live textiles, expresses exactly what has made us special for many decades - our collective enthusiasm for textiles and the opportunity to provide solutions that make a difference in the world.”

Successful Roots

Prof. Dr.-Ing. Otto Mecheels laid the foundation for an internationally-renowned company in 1946 when he founded the Hohenstein Institutes, a textile school in Hohenstein Castle. His son, Prof. Dr. rer. nat. Jürgen Mecheels modernized the Hohenstein Group’s business structures and expanded into new research and service areas such as textile finishing or professional laundries/dry cleaning. He helped to forever change textile safety with the STANDARD 100 by OEKO-TEX® certification system that protects consumers from harmful substances. Under Prof. Dr. Stefan Mecheels’ leadership since 1995, Hohenstein has been at the forefront of microfiber analysis, consistently perfected its created standards for comfort and compression testing and worked to reduce the industry’s ecological impact. Last but not least, the testing laboratory in Hong Kong, which has been in operation since 2011, and the Hohenstein textile testing laboratories in Bangladesh and India, which were opened in 2018, ensure even greater market proximity.

Solutions for the Global Textile Industry

Today, Hohenstein specializes in the testing, certification and research of all kinds of textile-related products. With a total of more than 1,000 employees at its headquarters in Bönnigheim and in more than 40 branches, contact offices and laboratories worldwide, the company faces the current challenges of the global industry.

"Textile sustainability remains a major focus for us and is woven through every decision we make," explains Stefan Mecheels. “Even services that are seemingly focused on innovation contribute somehow to longer lasting products, less waste and more safety. Our Digital Fitting Lab helps brands leap forward with digitized apparel development. Using modern 3D and 4D technologies and our traditional fit and pattern expertise, we help our clients design better fitting clothes with fewer prototypes and less waste.”

When SARS-CoV-2 struck, the company developed a quality label to easily identify non-medical, community masks that meet legal and functional requirements. The Hohenstein Quality Labels are independent proof with a high level of credibility among buyers and consumers.

Anniversary

Among the celebrations, Hohenstein plans to hold a mid-year press conference with regional and industry journalists. "We are celebrating this anniversary because we have succeeded in constantly adapting to the market and use our applied research to anticipate developments. For this I would first like to thank our employees, who, in keeping with the motto We live textiles, put their hearts and souls into their work. A very special thanks also goes to our customers, some of whom have been placing their trust in us for decades," says Stefan Mecheels, adding "I am convinced that we are positioned to continue our contribution in the future.

• Elleti Group partners with Wiser Wash for Europe and the Mediterranean area, with Portugal being the only exception, for a more sustainable fashion.
• The enterprise based in Verona joins Wiser Wash’s international network and adopts the innovative patented process for the treatment of denim that has the market’s lowest environmental impact.

Tradition and innovation: this combination has always characterized Elleti Group, a historic company based in San Bonifacio and an important point of reference for the denim industry and beyond. Now it is also the exclusive partner of Wiser Wash for Europe and the Mediterranean area, with Portugal being the only exception. Specializing in laundry, dyeing and garment making services, the company is led by the steady hand and ambitious vision of Luigi Lovato, who was recently recognized by Rivet50 as one of 2020's fifty most influential people in the denim ecosystem. The partnership with Wiser Wash is a fitting continuation of Elleti Group's tireless pursuit of excellence, development of cutting-edge solutions and commitment to environmental sustainability, which has always projected the proud Made in Italy tradition towards the future.

With the introduction of Wiser Wash's technology, Elleti Group has significantly reduced the amount of resources used in traditional garment treatment. This patented washing method eliminates the use of pumice stone and all harmful chemicals, while drastically reducing water consumption throughout the process. In addition, the efficiency of the process lowers chemical and mechanical stress on fabric fibers as compared to traditional treatment, guaranteeing greater garment robustness and longevity.

This important milestone is the latest and more relevant result of a commitment that has been integral to Elleti Group's approach since its foundation. This was already present in the Earthkeepers collection – a line of low environmental impact treatments which marked the culmination of research and experimentation journey, aimed at developing an authentic look whilst looking out for the safeguard of the environment, its resources and its people. Record of the company's evolution is kept in the "Stadium", an impressive archive of Elleti Group collections. There displayed are some 15,000 garments, direct evidence of the stylistic and technological developments that have made Elleti Group an international benchmark for creativity and high quality.

"Nothing is more important to us than satisfying our clients' needs. We put all our expertise and experience at the service of their creative ideas," said Luigi Lovato, Founder and CEO of Elleti Group. "The partnership with Wiser Wash is definitely another reason to be proud, and it will set our bar even higher in guaranteeing quality, authenticity and an ever-increasing respect for the environment and our employees."