From the Sector

all
Corona
Sustainable
Textile Business
Textile Machinery
Fibres, Yarns & Nonwovens
Technical Textiles
Interior Textiles
Clothing
Companies
Fairs
Trade
Associations
People
Archive
Reset
890 results
Texaid / Texcircle
26.10.2022

Swiss Textile Recycling Project TEXCIRLCE

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

Together with the design research expertise of the Lucerne University of Applied sciences and arts, the spinning expertise of Rieter and the sorting and collection expertise of Texaid, systems should be created where products of high quality can be produced of recycled fiber. On board were the expertise of further Cluster partners of Brands, Retailers, and the public sector to see how a joint Cluster and system coukld be established.

The Project Texcircle and cluster is led by the Lucerne University of Applied Sciences and Arts – Art  & Design, and in collaboration with Coop, Rieter, Jacob Rohner AG, Ruckstuhl AG, TEXAID as well as workfashion.com ag. Furthermore, Bundesamt für Zivildienst ZIVI, NIKIN AG, and Tiger Liz Textiles are supporting the project. The project is funded by Innosuisse.

Furthermore, collaboration partners from all over Europe contributed to the project to enable these prototypes and systems.

Through joint developments from the design, the collecting, sorting trials, tearing, and spinning trials until the actual production trials and product testing. The partners were able to recycle 2.5 Tons of pre-and post-consumer textile waste into product prototypes with a promising commercial interest. From socks, west, and pullovers to non-woven felts and accessories to carpets and curtains. Through our 2 years of collaboration, the teamcame across several hurdles in the textile recycling value chain which could be tackled. This was a proof of concept that a circular system is possible and the industry now has to enable this at full scale.

More information:
Texaid Texcircle post-consumer recycled material spinning
Source:

Texaid / Texcircle

print close
more
25.10.2022

adidas terminates partnership with Ye

After a thorough review, the company has taken the decision to terminate the partnership with Ye immediately, end production of Yeezy branded products and stop all payments to Ye and his companies. adidas will stop the adidas Yeezy business with immediate effect.

adidas will not tolerate antisemitism and any other sort of hate speech. Ye’s recent comments and actions have been "unacceptable, hateful and dangerous", and they violate the company’s values of diversity and inclusion, mutual respect and fairness, as adidas declares.

This is expected to have a short-term negative impact of up to €250 million on the company’s net income in 2022 given the high seasonality of the fourth quarter.

adidas is the sole owner of all design rights to existing products as well as previous and new colorways under the partnership. More information will be given as part of the company’s upcoming Q3 earnings announcement on November 9, 2022.

After a thorough review, the company has taken the decision to terminate the partnership with Ye immediately, end production of Yeezy branded products and stop all payments to Ye and his companies. adidas will stop the adidas Yeezy business with immediate effect.

adidas will not tolerate antisemitism and any other sort of hate speech. Ye’s recent comments and actions have been "unacceptable, hateful and dangerous", and they violate the company’s values of diversity and inclusion, mutual respect and fairness, as adidas declares.

This is expected to have a short-term negative impact of up to €250 million on the company’s net income in 2022 given the high seasonality of the fourth quarter.

adidas is the sole owner of all design rights to existing products as well as previous and new colorways under the partnership. More information will be given as part of the company’s upcoming Q3 earnings announcement on November 9, 2022.

More information:
adidas shoes
Source:

adidas AG

print close
more
(c) Zünd Systemtechnik AG
25.10.2022

Zünd: Heat Sealing Module – HSM receives composites industry award

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

At the recent CAMX 2022 Composites and Advanced Materials Expo in Anaheim, California, The Heat Sealing Module – HSM from Zünd was recognized with an Unsurpassed Innovation Award. The HSM significantly facilitates the processing and handling of dry fiber materials with thermoplastic content. This new tool is Zünd’s answer to a demand in the composites industry for wider-spread use and easier processing of these types of materials.

The American Composites Manufacturing Association, ACMA, proclaimed the Heat Sealing Module – HSM the winner of the ACE Award for Unsurpassed Innovation in the “Manufacturing: Equipment and Tooling” category. This award is presented annually to equipment, tooling, a production aid, or software designed to improve manufacturing production, environmental sustainability, or product quality and performance in composites manufacturing.

During processing, dry fiber materials are prone to fraying along the edges. Using hot air, the HSM seals the fabric along the cut path in advance of the Zünd Power Rotary Tool – PRT cutting it. Because of this sealing process, the cut can then be performed at full speed, in any direction, and produces both higher-quality parts and greater production efficiencies.

The HSM helps create clean, sealed edges when cutting fiber-reinforced thermoplastic composites. It benefits not only the cutting process itself, but other production processes downstream. Cutting this way leaves behind no loose or uncut fibers and maintains a clean cutting surface and uncontaminated production environment. At the same time, it ensures that cut parts maintain their shape, and this increased stability makes them much easier to handle, especially in fully automated production workflows.

More information:
Zünd Zünd Systemtechnik AG Composites thermoplastic composites cutting system
Source:

Zünd Systemtechnik AG

print close
more
Photo: «the Blue suit»
20.10.2022

CIRCULAR CLOTHING: First Cradle to Cradle Certified® denim collection

The first Cradle to Cradle Certified® clothing collection is on the market one year after the collaboration platform for Swiss textile labels was launched. The Circular Clothing cooperative has succeeded, in close cooperation with European suppliers, in gaining access to circular materials and equipment and using this for the Black Denim Collection by the ethical fashion label “the Blue suit”. An important step for the cooperative, which receives funding from the Migros Pioneer Fund, is the development of an online assessment tool which can be used to help check the readiness of textile labels to operate in a circular manner.

The first Cradle to Cradle Certified® clothing collection is on the market one year after the collaboration platform for Swiss textile labels was launched. The Circular Clothing cooperative has succeeded, in close cooperation with European suppliers, in gaining access to circular materials and equipment and using this for the Black Denim Collection by the ethical fashion label “the Blue suit”. An important step for the cooperative, which receives funding from the Migros Pioneer Fund, is the development of an online assessment tool which can be used to help check the readiness of textile labels to operate in a circular manner.

The black denim was developed by a renowned manufacturer in Italy. Since no toxic chemicals are used in the production process, this denim is safe for biological cycles and Cradle to Cradle Certified® Gold. Cradle to Cradle Certified® Gold certified material by the Swiss company OceanSafe was used for the lining of the jacket. Special innovative design elements and production processes, such as the printed lining, also meet the stringent Cradle to Cradle Certified® Gold requirements. Currently, 1% of the material of the Black Denim Collection is Cradle to Cradle Certified® Bronze. In the next few months, this percent and thus also the whole garments should reach the gold level.

The Cradle to Cradle® certification is based on the following five principles: Material Health, Product Circularity, Clean Air & Climate Protection, Water & Soil Stewardship, and Social Fairness. Depending on the extent to which all of these criteria are met by the manufacturing process, there are various levels of certification from bronze to silver, gold and platinum.

More information:
Cradle to Cradle Certified™ Circular Clothing Denim
Source:

CIRCULAR CLOTHING

print close
more
©MarchiFildi
19.10.2022

HSLU: Alttextilien werden zu neuen Kleidern

Die Hochschule Luzern HSLU hat zusammen mit Wirtschaftspartnern Methoden entwickelt, wie sich Alttextilien wieder zu hochwertigen Pullis, Arbeitskleidern oder Teppichen verarbeiten lassen.

Einem Bericht von WWF und PWC zur Folge sind in einem durchschnittlichen Schweizer Schrank 118 Kleidungsstücke, wobei ein Outfit – bestehend aus Pulli, Hose und T-Shirt – mit 1.5 Kilo zu Buche schlägt. Pro Tag landen 70’000 dieser Outfits oder 100 Tonnen in der Altkleidersammlung. Tendenz steigend.

Etwa die Hälfte der Altkleider wird weiterverkauft und exportiert. "Wie groß der Anteil an tatsächlich weitergenutzten Kleidungsstücken ist, ist nicht einfach zu beziffern", sagt Designforscherin Tina Tomovic von der Hochschule Luzern. Sicher ist laut der Expertin für textile Nachhaltigkeit, dass ein immer größerer Teil zu minderwertigen Produkten wie Putzlappen verarbeitet oder direkt verbrannt wird. Das Material dieser Textilien verschwindet damit unwiederbringlich aus dem Wertstoff-Kreislauf.

Die Hochschule Luzern HSLU hat zusammen mit Wirtschaftspartnern Methoden entwickelt, wie sich Alttextilien wieder zu hochwertigen Pullis, Arbeitskleidern oder Teppichen verarbeiten lassen.

Einem Bericht von WWF und PWC zur Folge sind in einem durchschnittlichen Schweizer Schrank 118 Kleidungsstücke, wobei ein Outfit – bestehend aus Pulli, Hose und T-Shirt – mit 1.5 Kilo zu Buche schlägt. Pro Tag landen 70’000 dieser Outfits oder 100 Tonnen in der Altkleidersammlung. Tendenz steigend.

Etwa die Hälfte der Altkleider wird weiterverkauft und exportiert. "Wie groß der Anteil an tatsächlich weitergenutzten Kleidungsstücken ist, ist nicht einfach zu beziffern", sagt Designforscherin Tina Tomovic von der Hochschule Luzern. Sicher ist laut der Expertin für textile Nachhaltigkeit, dass ein immer größerer Teil zu minderwertigen Produkten wie Putzlappen verarbeitet oder direkt verbrannt wird. Das Material dieser Textilien verschwindet damit unwiederbringlich aus dem Wertstoff-Kreislauf.

Dabei gilt die Textilindustrie als äusserst ressourcenintensiv. Textilien stehen gemäß eines Nachhaltigkeits-Aktionsplans der EU beim Verbrauch von Rohstoffen und Wasser an vierter Stelle, nach der Lebensmittelherstellung, dem Wohnungsbau und dem Verkehr. Baumwolle beispielsweise benötigt nicht nur viel Land zum Wachsen, sondern auch sehr viel Wasser. Die Alternative, synthetische Textilien, ist nicht besser, wie Tina Tomovic ergänzt. Sie basieren meistens auf Erdöl – einer endlichen Ressource.

Auf der Suche nach dem reinen Stoff
Für die HSLU-Forscherin ist klar: "Wir müssen unsere alten Kleider viel besser wiederverwerten als bisher und so den textilen Kreislauf schließen." Ein geschlossener Kreislauf bedeutet, dass alte Pullis oder T-Shirts nicht verbrannt oder zu Lappen verarbeitet werden, sondern zu neuer Kleidung – die dann wieder im Laden landet. Wie dieses Recycling funktionieren könnte, erforschten Tomovic und ihr Team gemeinsam mit Unternehmen aus der Textilindustrie im Projekt «Texcircle».

Oft bestehen Textilien aus verschiedenen Materialien, beispielsweise Baumwolle vermischt mit Polyester. Das macht das Recycling aufwändig. Denn das Material muss möglichst rein sein, um zu einem vielseitig verwendbaren Garn weiterverarbeitet werden zu können; «wild durcheinander gewürfelte Textilien», so Tomovic, nützten gar nichts.

Zweieinhalb Tonnen Material verarbeitet
Das Projektteam nahm daher die gesamte Recycling-Prozesskette unter die Lupe, vom Sammeln der Alttextilien übers Sortieren und dem anschließenden maschinellen Zerkleinern bis hin zum Spinnen des so gewonnenen Rohstoffs zu neuen Garnen und Vliesen. Die verwendeten Alttextilien – insgesamt 2.5 Tonnen Material – stammten größtenteils aus den Sammlungen des Textilverwerters Texaid. Eine zentrale Rolle im Projekt spielten nationale und internationale Wirtschaftspartner, welche die Fasern, Garne und Vliese zu Produkten verarbeiteten.

Namhafte Partner im In- und Ausland
Ein einzelnes Unternehmen wird den Herausforderungen einer funktionierenden Kreislaufwirtschaft nicht begegnen können – dies war eine der Schlussfolgerung aus dem Vorgängerprojekt «Texcycle», in welchem die Forschenden auf das Sammeln und Sortieren von Alttextilien fokussierten. Daher wurde für das Nachfolgeprojekt der "Texcircle-Cluster", bestehend aus Schweizer und internationalen Unternehmen im Bereich Textilfertigung und -recycling, gegründet. Die Projektpartner steuerten Know-how, Eigenleistung, finanzielle Beiträge und Materialspenden bei.

Die Partner aus der Industrie waren Coop, Rieter, Rohner Socks, Ruckstuhl, Texaid und Workfashion.
Texcircle wurde von der schweizerischen Agentur für Innovationsförderung Innosuisse unterstützt.


Die Tests in den Fabrikhallen der einzelnen Partnerunternehmen bezeichnet Tina Tomovic als «Reality Checks». Mehr als einmal musste das Team beim Bearbeiten des Materials feststellen, dass die Theorie in der Praxis nicht immer umsetzbar ist, wie sie erzählt: "Alte Kissen und Bettdecken sind aus einer Materialperspektive zwar sehr interessant für das Recycling. Eine effiziente und kostengünstige Verarbeitung der Waren ist heute aber noch nicht möglich."

Höhepunkt des zweijährigen Projektes war die Produktion mehrerer Prototypen auf der Basis von Alttextilien. Beispielsweise produzierte die Winterthurer Firma Rieter aus alten Jeanshosen Garn für einen Pullover. Der Zuger Arbeitsbekleidungsproduzent Workfashion wiederum verarbeitete alte Kissen und Bettdeckenfüllungen zu Isolationsfutter für Arbeitswesten – die Produktqualität musste im Rahmen des Projektes stets gleich hoch sein wie bei vergleichbaren Textilien im Laden.

Die Firma Ruckstuhl im bernischen Langenthal entwickelte einen Recycling-Teppich für den Wohnbereich. Das Garn dafür stammt zur Hälfte von getragenen Wollmänteln. «Wir haben schon länger nach Mitteln gesucht, wie wir im Betrieb einen weiteren Schritt in Richtung Nachhaltigkeit gehen können», sagt Ruckstuhls Geschäftsführer Adrian Berchtold. Das Projekt sei somit genau zur richtigen Zeit gekommen. Er erläutert: "Die Projektresultate zwangen uns, zu hinterfragen, welche Produktionsschritte für diesen neuen Teppich nachhaltig sind und welche nicht."

Berchtold überraschte insbesondere die Erkenntnis, dass das Waschen von alten Mänteln mit Wasser umweltschädlicher ist als mit Chemikalien: "Der Wasserverbrauch war einfach zu hoch. Paradoxerweise ist es in diesem Fall ressourcenschonender, die Textilien mit Ozon zu reinigen." Ruckstuhl plant, den Recycling-Teppich ab Mitte 2023 in kleiner Serie herzustellen.

More information:
Design, Kunst, Hochschule Luzern Recycling mechanisches Recycling Kreislaufwirtschaft
Source:

Hochschule Luzern – Design & Kunst

print close
more
19.10.2022

Kornit Digital issues Second-Annual Impact Report

Kornit Digital Ltd. unveiled its Impact Report for 2021 highlighting progress made against goals and further expanding its commitment to a long-term strategy designed to transform the world of fashion and textiles into one that is more sustainable. The comprehensive analysis details Kornit’s performance related to climate action, waste management, green chemistry, and diversity in the workplace, as well as other areas of the Company’s Environmental, Social, and corporate Governance (ESG) framework.

Key Accomplishments Against Baseline (2021)  
Kornit’s ongoing dedication to improving ESG practices within its own operations has resulted in Company-wide achievements in the areas of:

Climate Action and Waste Management*

  • ~16% reduction in GHG emissions intensity from x 9.11-e to 7.68 MTCO2-e
  • 39% reduction in hazardous waste intensity from 1.7 tons to 1.04 tons
  • 57% reduction in non-hazardous waste intensity from 33 tons to 14 tons

Green Chemistry

Kornit Digital Ltd. unveiled its Impact Report for 2021 highlighting progress made against goals and further expanding its commitment to a long-term strategy designed to transform the world of fashion and textiles into one that is more sustainable. The comprehensive analysis details Kornit’s performance related to climate action, waste management, green chemistry, and diversity in the workplace, as well as other areas of the Company’s Environmental, Social, and corporate Governance (ESG) framework.

Key Accomplishments Against Baseline (2021)  
Kornit’s ongoing dedication to improving ESG practices within its own operations has resulted in Company-wide achievements in the areas of:

Climate Action and Waste Management*

  • ~16% reduction in GHG emissions intensity from x 9.11-e to 7.68 MTCO2-e
  • 39% reduction in hazardous waste intensity from 1.7 tons to 1.04 tons
  • 57% reduction in non-hazardous waste intensity from 33 tons to 14 tons

Green Chemistry

  • Complete elimination of Acute Toxic Amines (CLP category 1, 2, 3) CMR
  • 20% reduction of VOC level in Robusto Inkset and 30% of VOC in Eco Ink/Green

DEI and Community Engagement

  • An increase in women in management, from 30% to 35%
  • Reporting 88% of employees feeling respected and free to be authentic at work - *Intensity measures are per $1 million of revenue.

Kornit Digital’s Impact Strategy
Propelled by an ambition to make a positive impact across all areas of its business and throughout the fashion and textile industries, Kornit further adjusted its Impact Strategy this year towards more expansive, longer-term goals and objectives. Kornit’s refined strategy reflects the Company's dual role as a change agent in the industry—both as a leader empowering the fashion industry to be more sustainable, and as an accountable participant responsible for embracing social and environmental change to make the world a better place.  
The holistic strategy accounts for both roles, across two fundamental pillars—"Enable the Change” and “Be the Change”—and incorporates both social and environmental KPIs designed to meet the Company’s goals and respond to stakeholders’ input, as well as industry and ecosystem needs

Kornit is officially unveiling the report during a press event at PRINTING United Expo 2022.

*Intensity measures are per $1 million of revenue.

More information:
Kornit Digital impact report Annual Report
Source:

Kornit Digital

print close
more
(c) Tonello
17.10.2022

Tonello presents Laundry (R)Evolution at Kingpins

Tonello will be unveiling the release of their new, more efficient and more responsible Laundry (R)Evolution, including three tools, at Kingpins Show in Amsterdam, from October 19-20.

Configurator
The new Configurator allows clients to choose the technologies, software, and accessories for their next laundry, combining diverse solutions and thus obtaining a real projection of energy and resource consumption, as well as savings and sustainability benefits.

B.O.P. (Be On Point)
The seamless integration with THE Laser, B.O.P. is based on the most recent developments in Computer Vision It makes positioning laser designs on garments automatic and rapid It allows a choice of different production modes and detects up to 8 garments at the same time.

Metro
Metro is a software that automatically and transparently measures the actual consumption of a laundry, summarizing these figures in each garment’s “environmental passport”.

Tonello will be unveiling the release of their new, more efficient and more responsible Laundry (R)Evolution, including three tools, at Kingpins Show in Amsterdam, from October 19-20.

Configurator
The new Configurator allows clients to choose the technologies, software, and accessories for their next laundry, combining diverse solutions and thus obtaining a real projection of energy and resource consumption, as well as savings and sustainability benefits.

B.O.P. (Be On Point)
The seamless integration with THE Laser, B.O.P. is based on the most recent developments in Computer Vision It makes positioning laser designs on garments automatic and rapid It allows a choice of different production modes and detects up to 8 garments at the same time.

Metro
Metro is a software that automatically and transparently measures the actual consumption of a laundry, summarizing these figures in each garment’s “environmental passport”.

At the show, Tonello will also demonstrate their technologies by washing the MSP Collection, in collaboration with PVH Europe, Kingpins, and designed by Piero Turk.

More information:
Tonello S.r.l. washing process Sustainability Kingpins
Source:

Tonello

print close
more
(c) adidas AG
11.10.2022

adidas and SOUL CAP announce partnership to make swimming more accessible

  • The adidas x SOUL CAP partnership aims to promote greater diversity and inclusivity in the world of swimming, by helping to break down social barriers in the sport.
  • The debut swim cap has been designed for people with long or voluminous hair in a range of sizes, for adults and children, in an exclusive linen green colorway.

adidas announces its first swim cap made in partnership with London-based start-up SOUL CAP , which will be available from 26th September. This collaboration – which follows the launch of adidas’ full-cover and inclusive sizing swimwear ranges last summer – is part of the brand’s ongoing commitment to make water sports more accessible.

  • The adidas x SOUL CAP partnership aims to promote greater diversity and inclusivity in the world of swimming, by helping to break down social barriers in the sport.
  • The debut swim cap has been designed for people with long or voluminous hair in a range of sizes, for adults and children, in an exclusive linen green colorway.

adidas announces its first swim cap made in partnership with London-based start-up SOUL CAP , which will be available from 26th September. This collaboration – which follows the launch of adidas’ full-cover and inclusive sizing swimwear ranges last summer – is part of the brand’s ongoing commitment to make water sports more accessible.

The idea for SOUL CAP was born in 2017 when founders Michael Chapman and Toks Ahmed took up adult swimming lessons, after not having learned how to swim as children. They noticed a problem during their classes – every swimmer wore the same size swim cap, no matter what hairstyle they had, which often resulted in people struggling with ill-fitting caps. This observation led to them creating SOUL CAP, a company that makes swim caps designed for people with long or voluminous hair.

The adidas x SOUL CAP swim cap is made from 100 per cent silicone, which creates less snag on the hair ensuring a more comfortable fit. Built with extra space, it provides a snug fit and tight seal to keep long and voluminous hair dry and healthy through every type of swim. The collection consists of an adult cap in sizes Regular-XXL and a children’s cap in sizes Regular-L, in an exclusive linen green colorway.

More information:
adidas SOUL CAP Sportswear
Source:

adidas AG

print close
more
(c) BTMA
The James Heal AirPro air permeability tester
11.10.2022

BTMA: Testing equipment manufacturer James Heal celebrates 150th anniversary

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

Long-standing BTMA member James Heal is celebrating its 150th anniversary this year, the company’s formation dating back to 1872, when it was listed as an oil and tallow merchant and mill furnisher in Yorkshire, UK.

Today, as a testing equipment manufacturer for textiles and nonwovens, James Heal continues to expand its range, with a focus on making testing simple – most notably with the introduction of its Performance Testing collection of instruments, most recently the AirPro and HydroView systems.

AirPro
The new James Heal AirPro air permeability tester is used to test the resistance of the flow of air through woven, knitted and nonwoven textiles. Its software offers flexibility with standards and  comprehensive reporting options and different test head sizes are available, making it suitable for a range of applications and standards

HydroView
The HydroView hydrostatic head tester is meanwhile designed to measure the penetration of water in materials which have an end use that requires water resistance, such as those in the medical, geotextiles and nonwovens sectors. It is also proving essential in the testing of end-use applications for technical textiles, such as in protective gloves, diving dry suits and winter sports apparel, to fishing waders, roofing, tenting, ground sheets and more.

More information:
BTMA British Textile Machinery Association James Heal textile testing
Source:

BTMA / AWOL Media

print close
more
Photo: Sellers Textile Engineers
Hybrid Shearing Cylinder
10.10.2022

The Hybrid Shear by Sellers Textile Engineers

BTMA member Sellers Textile Engineers is marking its 110th anniversary this year with the introduction of a new concept in carpet shearing, as the essential final step in ensuring tuft uniformity and ‘just new’ freshness in finished carpet rolls.

The company has for many years offered two options in the construction of its shearing cylinders – the first, namely the ‘strap-on’, incorporates spiral blades bolted to the cylinder body and the second, known as the ‘caulked-in’, includes spirals which are fixed very securely in a machined groove within the machine.

The new Sellers’ Hybrid Shearing Cylinder combines the benefits of both, resulting in an improved cut and finer finish, in addition to longer repeatable finishing and increased rigidity.

BTMA member Sellers Textile Engineers is marking its 110th anniversary this year with the introduction of a new concept in carpet shearing, as the essential final step in ensuring tuft uniformity and ‘just new’ freshness in finished carpet rolls.

The company has for many years offered two options in the construction of its shearing cylinders – the first, namely the ‘strap-on’, incorporates spiral blades bolted to the cylinder body and the second, known as the ‘caulked-in’, includes spirals which are fixed very securely in a machined groove within the machine.

The new Sellers’ Hybrid Shearing Cylinder combines the benefits of both, resulting in an improved cut and finer finish, in addition to longer repeatable finishing and increased rigidity.

“The Hybrid Shearing Cylinder has all the advantages of the ‘strap-on’ spiral blade to provide a sharper and cleaner cut, along with enhanced rigidity which significantly lengthens the intervals between the necessary regrinding of the blade,” explains Sellers Director Neil Miller. “We currently have six Hybrid Shearing Cylinders operating in the field and the earliest, which has been installed in both No1 Head position, where the majority of the shearing operation and heaviest cut is performed, and also in No3 Head, where the sharper cutting angle has resulted in a much improved surface quality.”

Sellers shearing machines have led the field in carpet finishing for many decades, enabling the leading manufacturers to stay competitive by enabling the highest quality of finish to be achieved economically and efficiently.

The latest advanced features of these machines include a load cell tension control drive system, an automated touchscreen for easy operator control and fault diagnosis, an enhanced cleaning system including cylinder and blade separation and fully controllable pivoting beds. Further options include thickness monitoring, seam detection and metal detection systems.

“The Hybrid Shearing Cylinder will become standard on our latest machines and also be made available for retrofitting, to provide significant benefits to our existing users,” says Miller. “All of our equipment is designed, manufactured, assembled and tested at our plant in the UK, and as one of the few remaining European engineering companies to make all of our components in-house – with now over a century of accumulated know-how – flexibility in design allows our finishing solutions to be targeted to specific customers and their product requirements. Aligned to this is a lead in process control systems which ensure the accurate control, reliability and repeatability of the processing parameters on all of our machines.”

Sellers remains committed to providing complete finishing solutions for all carpet, tile and artificial grass products. Its range includes machines for tufted secondary backing, both conventional, powder and extrusion lamination, Wilton and Axminster products, artificial grass and foam lines, coating lines for bitumen, PVC, PU and other polymers, as well as shearing for all carpet products.

Ongoing developments on the company’s coating and drying lines have resulted in improved guiding and product tension control as well as dryer efficiency, reducing heat loss and optimising energy use. These include a re-design of the fan pressure boxes and impingement nozzles to increase airflow efficiency, modulating gas burners and introducing easy clean, accessible filters.

In addition, the proven dual zone system has been enhanced, giving a temperature differential of up to 80°C between top and bottom zones. Dryers can be heated by either gas or steam and operation and access have been simplified with controls via touchscreen and PLC.

An extensive range of ancillary equipment is available to provide maximum flexibility to cover product requirements, for both new processing lines and as upgrades to existing equipment.

“Carpet manufacturing is now based on well-established, tried and trusted processes and it’s rare for new innovations to be introduced into this sector,” says Jason Kent, CEO of the British Textile Machinery Association. “The new Sellers Hybrid Shearing Cylinder can provide a competitive edge for manufacturers which is currently being proven in the field. It’s one of a number of new innovations the company is planning to showcase at next year’s ITMA exhibition in Milan.”

More information:
Sellers Textile Engineers shearing cylinders textile finishing Carpets
Source:

AWOL Media

print close
more
(c) CSR Europe
07.10.2022

Epson at EUROPEAN SDG ROUNDTABLE about Sustainable Fashion

The fashion industry currently produces 20% of global wastewater and 10% of global carbon emissions. Improvements can be made for example localizing fashion, using more on-demand digital printing (it can save up to 4kg of CO2 per item) and digital textile printers (they reduce water use by up to 90% and energy use by up to 30%). Increasing the use of sustainable materials is vital and extending the lifecycle of use would make a serious difference.

Together with designers, producers, retailers, and customers, Paolo Crespi, Sales & Marketing Director Printing Technologies at Epson, will discuss how each stage of the fashion production can be made more sustainable, and how circularity and longevity can be build into the lifecycle of fashion.

The panel will take place on Tuesday, 11 October 2022 at 09:30-11:00 am CET.

Click here for more information.

The fashion industry currently produces 20% of global wastewater and 10% of global carbon emissions. Improvements can be made for example localizing fashion, using more on-demand digital printing (it can save up to 4kg of CO2 per item) and digital textile printers (they reduce water use by up to 90% and energy use by up to 30%). Increasing the use of sustainable materials is vital and extending the lifecycle of use would make a serious difference.

Together with designers, producers, retailers, and customers, Paolo Crespi, Sales & Marketing Director Printing Technologies at Epson, will discuss how each stage of the fashion production can be made more sustainable, and how circularity and longevity can be build into the lifecycle of fashion.

The panel will take place on Tuesday, 11 October 2022 at 09:30-11:00 am CET.

Click here for more information.

More information:
Epson EUROPEAN SDG ROUNDTABLE Sustainability sustainable fashion textile printing
Source:

Epson and CSR Europe

print close
more
(c) adidas AG
07.10.2022

adidas Originals and Pharrell Williams drop new Collection

Just ahead of the fall season, adidas Originals and Pharrell Williams return to launch an array of new colors of their gender-neutral Humanrace Premium Basics Collection. The FW22 drop features a premium, heavyweight jersey crafted from cotton from Better Cotton, which supports more sustainable cotton farming. Designs are punctuated with the signature puff-print logo execution and large ‘Humanrace’ chest branding on select pieces.

The collection comprises the PW Basics Tee, PW Basics Short, PW Basics Hoodie, PW Basics Pant, PW Basics Crew , and PW Basics Long Sleeve Tee. Each item is available in sizes ranging from 3XS-2XL and in seven colors chosen by Pharrell, including Night Grey, Alumina, Light  Grey Heather, Linen Green, Halo Blue, Almost Pink, and Almost Yellow.

Just ahead of the fall season, adidas Originals and Pharrell Williams return to launch an array of new colors of their gender-neutral Humanrace Premium Basics Collection. The FW22 drop features a premium, heavyweight jersey crafted from cotton from Better Cotton, which supports more sustainable cotton farming. Designs are punctuated with the signature puff-print logo execution and large ‘Humanrace’ chest branding on select pieces.

The collection comprises the PW Basics Tee, PW Basics Short, PW Basics Hoodie, PW Basics Pant, PW Basics Crew , and PW Basics Long Sleeve Tee. Each item is available in sizes ranging from 3XS-2XL and in seven colors chosen by Pharrell, including Night Grey, Alumina, Light  Grey Heather, Linen Green, Halo Blue, Almost Pink, and Almost Yellow.

More information:
adidas adidas Originals clothing
Source:

adidas AG

print close
more
(c) BRÜCKNER
The project team of BRÜCKNER and HEATHCOAT in BRÜCKNER’s Technology Centre in Leonberg
04.10.2022

BRÜCKNER: New finishing line for British company HEATHCOAT FABRICS

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

HEATHCOAT FABRICS partnered again with BRÜCKNER Textile Technologies and their sales partner ADVANCED DYEING SOLUTIONS to install a finishing line for industrial textiles. HEATHCOAT FABRICS specializes in the production of technical textiles in the fields of texturising, weaving and warp knitting as well as dyeing and finishing. The prroducts are manufactured for use in the automotive, healthcare, defence, and aerospace industries

Mrs. Regina Brückner, CEO and owner of the BRÜCKNER Group stated: "To meet the complex re-quirements of HEATHCOAT is not easy because of the great variety of technical textiles produced. Our line has to finish light as well as heavy articles, so the design, control and the whole line layout have to be flexible, functional and still easy to operate. Fortunately, the team at HEATHCOAT FABRICS is very innovative and open-minded, and together we worked hard to develop the right technology and han-dling. We are very happy that we could convince this customer, whom we appreciate very much, with the productivity of our line and of course with our technological know-how."

The direct gas heated BRÜCKNER POWER-FRAME stenter with its staggered heating source arrangement every half zone provides best available temperature consistency across the length and the width of the stenter. The unit is equipped with a low-lub, horizontally returning combined pin / clip chain and several fabric paths, especially designed for the different fabrics being processed. Together with HEATHCOAT FABRICS technologists, the BRÜCKNER design team developed a special delivery end of the stenter with different edge trimming and slitting possibilities. Depending on the kind of products, the fabrics can be batched on large diameter A-frames, wound on cardboard tubes or plaited into trolleys.

More information:
Brückner HEATHCOAT FABRICS weaving warp knitting machinery Automotive Healthcare aerospace
Source:

Brückner Trockentechnik GmbH & Co. KG

print close
more
30.09.2022

Carbios published 2022 half-year results

Carbios published its operating and financial results for the first half of 2022. The financial statements as of June 30, 2022 were approved by Carbios' Board of Directors.

Carbios published its operating and financial results for the first half of 2022. The financial statements as of June 30, 2022 were approved by Carbios' Board of Directors.

  • Project to build the world's first PET biorecycling plant, in partnership with Indorama Ventures, the world's largest manufacturer of recycled PET: Establishment in France with strong backing from national government and the Grand-Est Region
  • On track to bring recycled PET from Carbios' proprietary innovation process to market by 2025
  • Fully operational industrial demonstration plant and step-by-step technological validation of the scale-up of the industrial solution designed and developed by Carbios
  • Launch of a textile consortium in partnership with On, Patagonia, PUMA and Salomon
  • Scientific article in the prestigious Biophysical Journal
  • Carbios strengthens its Governance and Management team
  • Carbios enhance its financial structure, banking the €30 million loan from the European Investment Bank (EIB)
  • Carbios Group's net cash position: €121 million at June 30, 2022

See the full report here.

More information:
Carbios financial year 2022
Source:

Carbios

print close
more
29.09.2022

CISUTAC: New European innovation project on circular & sustainable textiles

Launched this September, the new Horizon Europe project CISUTAC will support the transition to a circular and sustainable textile sector. As part of a consortium of 27 partners working on the project, TEXAID will among others support the project with sorting, disassembly and repair trials.

The production and consumption of textile products continue to grow, together with their impact on the environment, due to a lack of reuse, repair and recycling of materials. Quality, durability, and recyclability are often not being set as priorities in the design and manufacturing of clothing (EU Strategy for Sustainable and Circular Textiles, March 2022).  

CISUTAC aims to remove current bottlenecks in order to increase textile circularity in Europe. The objective is to minimise the sector’s total environmental impact by developing sustainable, novel, and inclusive large-scale European value chains.  

Launched this September, the new Horizon Europe project CISUTAC will support the transition to a circular and sustainable textile sector. As part of a consortium of 27 partners working on the project, TEXAID will among others support the project with sorting, disassembly and repair trials.

The production and consumption of textile products continue to grow, together with their impact on the environment, due to a lack of reuse, repair and recycling of materials. Quality, durability, and recyclability are often not being set as priorities in the design and manufacturing of clothing (EU Strategy for Sustainable and Circular Textiles, March 2022).  

CISUTAC aims to remove current bottlenecks in order to increase textile circularity in Europe. The objective is to minimise the sector’s total environmental impact by developing sustainable, novel, and inclusive large-scale European value chains.  

The project will cover most parts of the textile sector by working on two material groups representing almost 90% of all textile fibre materials (polyester, and cotton/cellulosic fibres), and focusing on products from three sub-sectors experiencing varying circularity bottlenecks (fashion garments, sports and outdoor goods, and workwear).  

CISUTAC will follow a holistic approach covering the technical, sectoral and socio-economic aspects, and will perform three pilots to demonstrate the feasibility and value of:

  • Repair and disassembly
  • Sorting (for reuse and recycling)
  • Circular garments through fibre-to-fibre recycling and design for circularity

To realise these pilots, the consortium partners will:

  • Develop semi-automated workstations
  • Analyse the infrastructure and material flows
  • Digitally enhance sorting operations (for reuse and recycling)
  • Raise awareness among the consumers and the textile industry

As part of the CISUTAC consortium, TEXAID, will conduct different trials of sorting, repair, and disassembly, and be active in the LCA and Standardisation work packages.

More information:
CISUTAC Texaid European project reuse fibre-to-fibre textile recycling
Source:

TEXAID Textilverwertungs-AG

print close
more
Photo: Pincroft
23.09.2022

Pincroft: New camouflage pattern for Dutch soldiers

Pincroft, UK’s largest textile dyer, printer and finisher, developed a new camouflage pattern for the Dutch Ministry of Defence as part of their Defensie Materieel Organisatie’s (DMO) ‘STRONG’ programme that aims to supply combat clothing and equipment to all military personnel part of the Royal Netherlands Navy, Army, Air Force and Marechaussee.

The new fabric and camouflage pattern boast the new Netherlands Fractal Pattern and will be used in at least 480,000 sets of uniforms for soldiers worldwide. The camouflage pattern is being manufactured in a green or woodland style for the Army, Air Force, Marechaussee and Marines, while the Navy receives a blue or marine style design. Pincroft followed the guidelines of the new Netherlands Fractal Pattern (NFP) to create an eight-colour camouflage design that provides high levels of disruption to give soldiers better concealment when needed.

Pincroft, UK’s largest textile dyer, printer and finisher, developed a new camouflage pattern for the Dutch Ministry of Defence as part of their Defensie Materieel Organisatie’s (DMO) ‘STRONG’ programme that aims to supply combat clothing and equipment to all military personnel part of the Royal Netherlands Navy, Army, Air Force and Marechaussee.

The new fabric and camouflage pattern boast the new Netherlands Fractal Pattern and will be used in at least 480,000 sets of uniforms for soldiers worldwide. The camouflage pattern is being manufactured in a green or woodland style for the Army, Air Force, Marechaussee and Marines, while the Navy receives a blue or marine style design. Pincroft followed the guidelines of the new Netherlands Fractal Pattern (NFP) to create an eight-colour camouflage design that provides high levels of disruption to give soldiers better concealment when needed.

The fabric was created by global workwear textile manufacturer, Carrington Textiles, specifically following the Dutch MoD’s requirements on comfort and protection. The result is a lightweight yet durable textile of 210gsm with a composition of 50% cotton, 50% high tenacity nylon and Ripstop for added strength.

The high cotton content of the fabric creates a uniform that’s comfortable to wear due to its softness to the touch, and breathability, as well as providing moisture wicking properties, key elements for the tough conditions soldiers work in. The addition of high tenacity nylon to the fabric, provides added strength and durability, with the Ripstop properties of the fabric offering tear resistance.

Around 480,000 trousers and jackets will be delivered to officers from the Royal Netherlands Navy, Army, Air Force and Marechaussee, during a uniform roll out part of the Dutch MoD’s ‘STRONG’ programme that aims to equip the armed forces in the next 18 months with versatile uniforms and equipment that are adjustable according to the assignment. The pack also includes a raincoat, combat shirt and baseball cap.

More information:
textile finishing camouflage pattern Pincroft military uniforms Protective Textiles Carrington Textiles
Source:

PINCROFT DYEING AND PRINTING

print close
more
(c) adidas
23.09.2022

adidas by Stella McCartney: Industry-First, with Viscose Sportswear

The garment is part of the New Cotton Project, an EU Consortium of key players united to demonstrate the potential of circular garment production
adidas by Stella McCartney presented a first of its kind sportswear garment designed to demonstrate the potential of a circular fashion ecosystem. Joining forces with leading names and innovators in the fashion industry to create, test, and innovate, the tracksuit forms the pinnacle expression of the brand’s pilot circularity program, Made to Be Remade. A take-back scheme where consumers can wear it down and then return it by scanning a QR code via the product so it can be remade. Moving adidas closer to its goal to help end plastic waste.

The garment is part of the New Cotton Project, an EU Consortium of key players united to demonstrate the potential of circular garment production
adidas by Stella McCartney presented a first of its kind sportswear garment designed to demonstrate the potential of a circular fashion ecosystem. Joining forces with leading names and innovators in the fashion industry to create, test, and innovate, the tracksuit forms the pinnacle expression of the brand’s pilot circularity program, Made to Be Remade. A take-back scheme where consumers can wear it down and then return it by scanning a QR code via the product so it can be remade. Moving adidas closer to its goal to help end plastic waste.

It’s currently estimated that just under 1% of all textiles worldwide are recycled into new textiles, so it’s vital the textile industry comes together to learn and knowledge-share. Scheduled across a three-year period, the consortium which includes partners such as Frankenhuis have collected and sorted post-consumer end-of-life textiles, which using pioneering Infinited Fiber technology have been regenerated into a new man-made cellulosic fiber called Infinna™ - which looks and feels just like virgin cotton. This is then turned into a yarn blended with organic cotton, for garment production.

Designing the tracksuit, made using viscose (60% viscose, 40% organic cotton) as a consortium member took the process from a linear to a circular model , as the apparel’s function and style were of equal focus to the garment’s end of life existence.

At the end of the project, consortium partner Aalto University, a Finnish multidisciplinary community specialising in science, art, technology , and design, will distribute learnings with the industry and bring this potential circular design solution to the ever-eco-conscious consumer.

More information:
adidas Stella McCartney Sportswear circular fashion
Source:

adidas

print close
more
SHIMA SEIKI
22.09.2022

Virtual Samples: SHIMA SEIKI and KDDI launch XR Mannequin for APEXFiz

SHIMA SEIKI announces a sales promotion package for the apparel industry together with KDDI, Linking 3D fashion design with cross-reality― realizing digital catalogs, VR showrooms and new customer experience allowing 360-degree viewing without actual samples

Leading fashion technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan together with telecommunications company KDDI Corporation of Tokyo, Japan launched "XR Mannequin for APEXFiz," a sales promotion package that links SHIMA SEIKI's APEXFiz design software for the apparel industry with KDDI's XR (cross-reality) technology.

SHIMA SEIKI announces a sales promotion package for the apparel industry together with KDDI, Linking 3D fashion design with cross-reality― realizing digital catalogs, VR showrooms and new customer experience allowing 360-degree viewing without actual samples

Leading fashion technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan together with telecommunications company KDDI Corporation of Tokyo, Japan launched "XR Mannequin for APEXFiz," a sales promotion package that links SHIMA SEIKI's APEXFiz design software for the apparel industry with KDDI's XR (cross-reality) technology.

XR Mannequin for APEXFiz will be offered to the apparel industry. Using an XR Mannequin that enables viewers to check product images from any angle in 360 degrees on various devices, XR Mannequin for APEXFiz enables digital catalogues with 3D virtual sample image data of garments designed on APEXFiz design software, 360-degree VR showrooms, as well as digitally extended stores. It also realizes virtual proposals at exhibitions, showroom-style stores with no inventory, and user-friendly purchase experience on e-commerce sites, and more. It also allows users to reduce excess stock at stores and create new sales opportunities.

Eventually, by adding movement to models wearing Virtual Samples and rendering them on a cloud server, customers will be able to view high-resolution virtual fashion shows on their smartphones and other devices.

 Until now, the apparel industry has been making actual product samples in each of the planning and design stages of production. This process not only takes an enormous amount of time and cost, but generates waste of raw materials including fabric that require disposal. At the retail stage, stores also needed to have various sizes and colors in stock to address a wide range of customer preferences, resulting in excess inventory.

With SHIMA SEIKI's APEXFiz, designs can be evaluated without making actual samples, minimizing resources spent on sample production as well as lead time, enabling environmentally-friendly manufacturing.

In May 2022, KDDI developed a high-resolution XR mannequin for apparel sales, with support from Google Cloud. It enables various devices such as store signages and smartphones to check products from any angle in 360 degrees, enabling stores to sell products without maintaining inventory.

SHIMA SEIKI and KDDI combines APEXFiz and XR Mannequin to start providing XR Mannequin for APEXFiz. This brings DX solutions to all stages in the supply chain for the apparel industry, from planning and design to sample making, production, distribution, and retail sales. SHIMA SEIKI and KDDI will continue to create services together that link each other's products, to bring about a sustainable society by reducing excess stock, and providing a customer experience that gives peace of mind when purchasing products.

More information:
Shima Seiki 3D-software Virtual Reality
Source:

SHIMA SEIKI

print close
more
(c) Eli Magaziner
22.09.2022

Kornit Digital, Cozmo and Raw-Edges present sofa with custom designs

Kornit Digital is collaborating with furniture start-up Cozmo and London design studio Raw-Edges to showcase the unlimited creativity made possible by digitally produced custom sofa jacket designs at the London Design Festival, September 17th -25th. Dubbed “Cheek Prints,” the collection was created sustainably, quickly, and on-demand with Kornit’s digital fashion and textile production solutions. Each unique cover features visually designs intended to transform plain, standard sofas into custom creations with an entirely fresh look and feel. The collection was designed by Raw-Edges at their London design studio.

Kornit Digital is collaborating with furniture start-up Cozmo and London design studio Raw-Edges to showcase the unlimited creativity made possible by digitally produced custom sofa jacket designs at the London Design Festival, September 17th -25th. Dubbed “Cheek Prints,” the collection was created sustainably, quickly, and on-demand with Kornit’s digital fashion and textile production solutions. Each unique cover features visually designs intended to transform plain, standard sofas into custom creations with an entirely fresh look and feel. The collection was designed by Raw-Edges at their London design studio.

The sofa collection was produced using Kornit’s Presto direct-to-fabric digital production system. With the on-demand technology, designers can easily and rapidly embrace new possibilities to transform mere concepts into custom fabrics. Digital production removes typical limitations of one fabric, one design at a time – whether it’s a single sofa or many sofas – and at the same cost. For industries ranging from fashion and home décor to other advanced textile applications, the Kornit solution consistently unlocks unlimited creativity – producing garments and fabrics with a high quality and a soft feel.

More information:
Kornit Digital London Design Festival digital printing furniture
Source:

Kornit / Pr4u

print close
more
(c) Fraunhofer CCPE
19.09.2022

Fraunhofer CCPE on the way to an international circular plastics economy

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

In a circular plastics economy, resources can be saved, products can be intelligently designed for long service life, and end-of-life losses can be reduced. Systemic, technical and social innovations are needed to make the transition from a linear to a circular economy a success. This is what the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE is researching in the three divisions “Materials”, “Systems” and “Business”. The cooperation of the six Fraunhofer institutes IAP, ICT, IML, IVV, LBF and UMSICHT enables a multi-stakeholder approach in which the appropriate R&D competencies are bundled.

Fraunhofer CCPE would like to present and discuss successful projects and research approaches on an international scale at the Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich. The summit is to become an international forum for exchanging ideas for solutions and innovations for a circular plastics economy.

Cross-industry collaboration - local, regional and international
Since August 2022, Prof. Manfred Renner, Institute Director of Fraunhofer UMSICHT, is the new head of Fraunhofer CCPE. He succeeds Prof. Eckhard Weidner, who has retired. “Cross-industry cooperation - very local, but also regional and international - is the elementary prerequisite for a functioning circular plastics economy. At the summit, players from all points of the compass will meet and network in order to rethink the plastics value chain together," explains Prof. Manfred Renner, adding, “We want to provide answers to the following questions:  How can we make all Circular Economy principles, i.e. the ten R-strategies, known? How can industry, science and society best cooperate in a transformation to a circular plastics economy for the greatest possible impact?”

Results of the Fraunhofer CCPE cluster so far are innovative approaches for circular business models, intelligent collection, sorting, and recycling technologies, but also new formulations for circular polymers and compounds to enable multiple recycling cycles. With the newly developed assessment tool CRL® , companies can, for example, self-assess the maturity of products or product systems with regard to the circular economy. The tool checks the extent to which a product already takes into account circular economy principles in the areas of product design, product service system, end-of-life management and circular economy, and where there is still potential for improvement.

More information:
Fraunhofer CCPE plastics circular economy Fraunhofer CCPE Summit
Source:

Fraunhofer UMSICHT

print close
more