From the Sector

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

As a result, adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% – 13% range). Because of the less favorable market mix due to lower-than-expected revenues in Greater China as well as the impact from initiatives to clear excess inventories in this market until the end of the year, the company’s gross margin is now expected to be around 49.0% in 2022 (previously: around 50.7%). Consequently, the company’s operating margin is now forecasted to be around 7.0% in 2022 (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion – € 1.9 billion range).

So far, the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any other market. Nevertheless, the adjusted guidance also accounts for a potential slowdown of consumer spending in these markets during the second half of the year as a result of the more challenging macroeconomic conditions.

Despite these headwinds, adidas continues to expect double-digit revenue growth during the second half of the year for the total company. In addition to easier prior year comparables, the acceleration will be driven by adidas’ strong product pipeline, the restocking opportunity with its wholesale customers given unconstrained supply as well as the support from major sporting events.

Based on preliminary numbers, adidas’ currency-neutral revenues grew 4% during the second quarter. This increase was driven by strong double-digit growth in North America and Latin America, high-single-digit growth in EMEA (also double-digit growth excluding negative Russia/CIS impact) as well as a return to growth in Asia-Pacific. In euro terms, sales increased 10% to € 5.596 billion. The company’s gross margin declined 1.5 percentage points to a level of 50.3% and operating margin reached 7.0% during the second quarter (2021: 10.7%). Net income from continuing operations was € 360 million in Q2 (2021: € 387 million) supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision.

The partnership will aim at eliminating hazardous Potassium Permanganate Spray and most manual processes in denim finishing, while reducing Greenhouse Gas emissions, water and chemical use in the process

Hong Kong based Epic Group, a leading garment manufacturer for global brands today announced its strategic partnership with CleanKore, a denim innovation and patent licensing company. This partnership aims at scaling the CleanKore patented yarn dyeing technology that provides numerous sustainability benefits for both the denim mill and garment manufacturer.

CleanKore patented technology changes the chemistry and the process used to dyeing yarns at the denim mills by keeping intact the white core of the yarn and only dyeing the surface. This technology significantly reduces water, chemicals and process time in the denim garment finishing stage.

Denim garment finishing often involves onerous manual processes such as handsanding and hand whiskering, spraying of harmful Potassium Permanganate (PP) (done by heavily protective equipment donned personnel), and multiple washing cycles. CleanKore technology coupled with lasers enable elimination of the PP spray process, significantly improving health and wellbeing of apparel workers, as well as emissions of harmful chemicals. Manual processes are eliminated in most styles and significantly reduced in others.

CleanKore technology also enables the reduction of wash cycles – reducing water, chemical use and process time, adding to the sustainability credentials of the end products. The products currently tested by Epic Group and CleanKore demonstrate up to 44% of water savings in garment finishing and up to 60% of energy savings in the fabric dyeing stage, along with the elimination of PP spray.

Through their partnership, Epic Group and CleanKore are planning to rapidly scale up the adoption of this technology in partnership with Epic Group’s customer base. In the first year, the partnership plans to reach over 4 million pairs of denim and working towards a scale of 15 - 20 million pairs of denim per annum in the next 3 years, converting a large portion of Epic Group’s denim production to CleanKore technology.

• Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
• Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
• EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
• Action plan to increase sales and profitability
• Rieter site Winterthur
• Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level. Despite higher sales, the significant increase in material and logistics costs, additional costs for compensation of the material shortages and the expenditure incurred for the acquisition in the years 2021/2022 resulted in a loss. Rieter is implementing an action plan to increase sales and profitability. The sales process for the remaining land owned by Rieter was initiated.

Order Intake and Order Backlog
Rieter posted an order intake of CHF 869.4 million, which included CHF 176.6 million from the businesses acquired in the years 2021/2022. As expected, demand has thus returned to normal compared with the exceptionally high figure for the prior-year period, but remains well above the average figure for the last five years of around CHF 570 million (first half 2021: CHF 975.3 million, first half 2022 excluding acquisition effect CHF 692.8 million).

The regional shift in demand with investments in additional spinning capacity outside China along with investments in the competitiveness of Chinese spinning mills continues. Rieter benefits from its technology leadership, the innovative product portfolio and the completion of the ring- and compact-spinning system through the acquisition of the automatic winding machine business. The largest order intakes came from India, Turkey, China, Uzbekistan, and Pakistan.

On June 30, 2022, the company had an order backlog of more than CHF 2 100 million (June 30, 2021: CHF 1 135 million). Cancellations in the reporting period amounted to around 5% of the order backlog.

Sales
The Rieter Group posted sales of CHF 620.6 million, which included CHF 68.9 million from the businesses acquired in the years 2021/2022 (first half 2021: CHF 400.5 million).

As a result, sales were significantly higher than in the prior-year period, although preproduced deliveries, which mainly affected the Business Group Machines & Systems, in the three-digit million range had to be postponed until the second half of 2022. The reasons for the postponements were the COVID lockdown in China and supply chain bottlenecks.

EBIT, Net Result and Free Cash Flow
Rieter posted a loss of CHF -10.2 million at the EBIT level in the first half of 2022.

Earnings were impacted by significantly higher material and logistics costs. The price increases already implemented are having a delayed effect, mainly in the Business Group Machines & Systems, and were therefore unable to compensate for the high increase in costs. In addition, costs in connection with material shortages negatively impacted profitability. The result also includes acquisition-related expenses of CHF -11.2 million.

The loss at the net result level was CHF -25.2 million, of which CHF -17.6 million was due to the acquisition.

Free cash flow was CHF -57.1 million, attributable to the build-up of inventories in connection with the high order backlog and postponed deliveries.

Action Plan to Increase Sales and Profitability
Rieter is implementing a comprehensive package of measures with the aim of increasing sales and profitability in the second half of 2022.

The package focuses on two main priorities: Firstly, Rieter is continuing to systematically implement price increases while working to improve the quality of margins of the order backlog, so as to compensate for cost increases in materials and logistics.
Secondly, Rieter is working closely with key suppliers and is developing alternative solutions to eliminate material bottlenecks, as far as possible, in order to safeguard deliveries.

Rieter Site Winterthur
The Board of Directors has decided to begin the process for the sale of the remaining land at the Rieter site in Winterthur (Switzerland). In total, around 75 000 m2 of land will be sold.

Outlook
As already reported, Rieter expects demand for new systems to normalize further in the coming months. Due to the capacity utilization at spinning mills, the company anticipates that demand for consumables, wear & tear and spare parts will remain at a good level.

For the full year 2022, due to the high order backlog and the consolidation of the businesses acquired from Saurer, Rieter expects sales of around CHF 1 400 million (2021: CHF 969.2 million). The reduced sales forecast compared to early 2022 (March 2022: CHF 1 500 million) reflects the impact of global supply bottlenecks. The realization of sales revenue from the order backlog continues to be associated with risks in relation to the well-known challenges.

Despite significantly higher sales, Rieter expects EBIT and net result for 2022 to be below the previous year’s level. This is due to the considerable increases in the cost of materials and logistics, additional costs for compensation of material shortages as well expenses in connection with the acquisition in the years 2021/2022. Despite the price increases already implemented, global cost increases continue to pose a risk to the growth of profitability.

The adidas TERREX HS¹ is one of the first knitted products to be made in part with Spinnova technology. At least 30% of the fabric in this mid-layer hiking hoodie comes from wood-based SPINNOVA® fibres (other fibres)* and 70% from cotton (organic).

Adidas is committed to helping End Plastic Waste via a three-loop strategy that consists of using recycled materials, materials that can be made to be remade and in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS¹.  

The first product to emerge from this partnership, the adidas TERREX HS¹ mid-layer is a piece of multi-functional gear that works on the trails and then rolls up into its hood for easy storage or to create a pillow on longer adventures. It was designed using UNITEFIT – an all-gender fit system created with a spectrum of sizes, genders, and forms in mind.

Made in part with Spinnova technology , a minimum of 30% of the fabric in the adidas TERREX HS¹ comes from wood-based SPINNOVA® fibres (other fibres)* that are made by grinding wood pulp with water into a paste and then spun into a textile fibre.

The product also works with the material’s natural color. Since no dyeing or bleaching is applied, in turn this uses less water compared to the standard dyeing process.

* (Rayon) in US, (New type of cellulose fibre) in China

The electrolyser producer Enapter has set itself the goal of developing its entire production process to run without negative impacts on the environment. As an important step on this journey, it is building the Enapter Campus production facility, which will be powered entirely from renewable energy produced on-site and in the neighbouring Bioenergiepark. The site in in Saerbeck, North Rhine-Westphalia combines electrolyser production, an R&D building, administration and office space, as well as a cantine over 82,000 square metres. Now the company wants to investigate what other measures can be implemented to achieve its “Life Cycle Impact Zero” aspirations – together with researchers from Fraunhofer UMSICHT, the Wuppertal Institute and the Institute of Sustainable Nutrition (iSuN) of FH Münster.

With the Life Cycle Impact Zero project, started on April 15, 2022, the parties want to develop and apply an especially comprehensive and holistic approach to environmental assessment. This includes chemical manufacturing and electrolyser production, as well as matters like the use of energy and water resources, the generation of waste or the human factor in general. This is intended to cover all interactions between business and people. That includes, in particular, Enapter’s employees, but also people in upstream and downstream value chains, users of the technology or residents close to the production site. A concept for sustainable employee catering is also being developed.

The basis for all environmental assessment that will be carried out is ISO 14040. The recognised international standard divides the research into four phases: Aim and scope of the study, inventory analaysis, impact assessment, as well as interpretation. Sensitivity analyses and scenario techniques are also used as further methods.

On the basis of these analyses, the 18-month project should derive concrete measures to avoid negative environmental impacts completely, if possible, for example in production, employee mobility or in energy supply. Furthermore, it will examine whether these measures are transferable to Enapter’s other locations – such as in Italy. Following on from the project, the steps defined should be implemented by Enapter in the next phase. In the subsequent Phase 3, a renewed analysis is planned. This will determine if the technological innovations achieved by then in the production and use of Enapter’s electrolysers can enable additional ecological improvements.

The Life Cycle Impact Zero project is supported by the State of NRW.

Since 85 years, Riri Group is a point of reference for the creation of details of style providing fashion brands with accessories, including zippers, buttons, metal components, and fashion jewels. Fashion is necessarily a reflection of social changes, cultural turmoil, popular aspirations, and the needs of the final customer: from these assumptions comes Riri Group’s FW 23-24 collection. The newly released collection presents two dynamic paths to explore the needs of the market targeting self-expression through style: Extreme Outverse and Fluid Glamour.

EXTREME OUTVERSE: Accessories for accessing multidimensionality
Art, space travels and the metaverse experience provide the inspiration for transparent and glossy digital prints, laser markings, use of colored paints, use of jacquard ribbon and iridescent lurex, invisible button caps, PVD finishes (rainbow, matt black), reverse coated nylon zips.

FLUID GLAMOUR: Redefine infinitely (elegance) standard
Fluid Glamour expands the processes of representing the individual in an elegant interpretation of its complexity. This concept of fluidity and uniqueness meets the new frontier of the space tourism race and intergalactic style to create futuristic atmospheres and sculptural silhouettes: rhinestones and black stones developed by Amom, wool yarns, jacquard, and a variety of tapes – metallised genuine leather and eco-leather, GOTS-certified cotton and GRS-certified recycled polyester, knitwear, white with silver lurex – that reflect the space exploration and dark desert landscapes.

On June 13, EREMA Group and Borealis invited representatives of the international plastics and recycling trade press to Upper Austria for a sneak preview of the technological developments and lighthouse projects that the companies will present at K 2022, the plastics industry's international meeting place. The venue for the pre-K event was EREMA Group headquarters in Ansfelden.

EREMA Group K 2022 preview
In Düsseldorf, the subsidiaries of the EREMA Group - which are EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC - will present their technological innovations, services and support together at a Group trade fair stand for the first time. Seven new recycling systems and components will be presented that enable large-scale plants with a production capacity of up to 6 t/h while setting a milestone in recyclate quality and process stability. This is made possible by technological innovations in the plasticizing unit that have been specially developed for high throughputs with low specific energy consumption, the new EREMA 406 laser filter with a 50 percent larger screening area, and new digital assistance systems that will be launched at K 2022 and made available on the BluPort® customer platform. These include, for example, the PredictOn app, which helps to anticipate and eliminate imminent malfunctions based on continuous measurement and evaluation of machine data.

New series of machines for new target groups
For customers looking for rapidly available recycling systems for simple applications, EREMA Group subsidiary UMAC has an innovation in store for K 2022. The company, which has so far specialised in refurbishing and trading in previously owned equipment, is expanding its business area and in Düsseldorf will launch READYMAC, a standardised, prefabricated recycling solution that can be produced from stock, based on proven EREMA TVE technology.

Finally, in the inhouse recycling segment, PURE LOOP and PLASMAC will round off the wide range of machines offered by the group of companies with their product portfolio.

Live recycling and lighthouse projects at the Circonomic Center
In the outdoor area of the K show, EREMA will bring plastics recycling to life with live demonstrations in conjunction with cooperation partners. Different waste streams are processed for this purpose. The wide variety of high-quality applications for recyclate will be showcased in the "products made of recyclate" exhibition, ranging from technical components to consumer goods and food packaging.

Borealis – accelerating the transition towards a more circular future
Borealis is committed to using their expertise and global reach to advance the circular economy of plastics. At the joint Pre-K 2022 kick-off on June 13, Borealis provided a preview of their integrated way of circular thinking and featured topics and activities at the K Fair 2022 in October. The preview covered new technologies and innovations including new packaging and infrastructure applications of the Bornewables™ portfolio of circular polyolefin products, manufactured with renewable feedstocks. New applications for Design for Recyclability, Re-Use, chemical recycling and advanced mechanical recycling were also on display.

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 
The Automotive Cutting Room 4.0 offer is a set of solutions connected to one other: Vector, the fabric cutting equipment offering the best performance in the market; Empower, a new generation of digital services to leverage Vector's capabilities; Valia, the heart of the new offer, a software for preparing and scheduling production; and Algopex, an application for exploiting and capitalizing on all the data generated by the cutting room, so you can make the best decisions as quickly as possible.
 
Connecting up all the elements of the Automotive Cutting Room 4.0 offer delivers this unprecedented value and enables an unparalleled level of performance to be achieved. Nicolas Favreau, Lectra’s Automotive Marketing Strategy Director, explains: “When the whole cutting room process is digitalized, the data generated are centralized and accessible in real time, helping our customers to make the best decisions at every step of the production process. The benefits are huge. For example, the key performance indicators from the offer’s first users show productivity gains of around 5% and a reduction in material consumption of nearly 2%. That’s unheard of! These results, combined with the agility that the Automotive Cutting Room 4.0 brings and the complete process control, demonstrate the offer’s maximum relevance.”

• Joining Science Based Targets initiative

ith its Advance Sustainability Strategy 2025 launched in 2018, Autoneum defined ambitious goals in the areas of environment, society and governance. In the past year, significant quantitative and qualitative improvements were achieved, as shown in the Corporate Responsibility Report 2021 published today. For example, CO2 emissions were reduced in 2021 and the proportion of reused production scrap (recycling) was significantly increased.

Following Autoneum’s decision last year to extend its environmental targets with quantifiable targets for all direct and indirect greenhouse gas emissions and a time horizon to 2027, the Company has recently signed the declaration to join the Science Based Targets initiative (SBTi). Autoneum acknowledges the urgent need for action and will submit its ambitious, science-based targets to the SBTi to reduce CO2 emissions in the near term. In addition, Autoneum is reporting its Scope 3 emissions in full for the first time. In line with the strategic goal of continuously reducing electricity purchases from fossil fuels and replacing them with renewable energies, ten plants worldwide were converted to renewable energies in 2021.

In the past year, Autoneum again implemented a large number of projects in the areas of “Sustainable Products and Production Processes”, “Fair and Attractive Workplace”, “Good Corporate Citizenship” and “Responsible Supply Chain Management”: 29 eco-efficiency projects with a focus on materials efficiency and recycling contributed to more environmentally friendly production and correspondingly more sustainable components worldwide. The result was a significant reduction in waste and a further optimization of processes for a range of products. Moreover, new eco-efficient products were successfully launched on the market.

A complete overview of all targets and activities during the past year can be found in the Corporate Responsibility Report 2021.

• Bluesign announces partnership with SCTI

Bluesign has teamed up with Sustainable Chemistry for the Textile Industry (SCTI^TM) to develop a sustainable chemistry index that shall provide a standard communication guide for chemical suppliers, manufacturers, brands, and NGOs.

The first-of-its-kind index is intended to inspire change in the industry by making it easier for stakeholders to assess the sustainability of textile chemical products against the highest standards while safeguarding the intellectual property (IP) of participating chemical companies. IP protection is critical to ensuring ongoing investment in sustainable solutions.

Chemical products, such as dyes and textile auxiliaries, are often characterized with the attribute of “free of a certain substance”. Rather than prioritizing ingredients only, the bluesign^® SYSTEM already goes beyond this. The chemicals and the production site where they were created must meet certain criteria regarding environmental performance, occupational health and safety, and product stewardship performance to be bluesign^® APPROVED.

The sustainable chemistry index will be reserved for substances that offer transparency on a number of additional indicators including the chemical’s circularity viability, greenhouse gas emissions during production, and the source of the raw materials. The sustainable chemistry index will also require that the downstream use of the chemical is optimized, meaning, for example, that it promotes resource saving in textile finishing. Additionally, excellent corporate governance paired with well-defined environmental and social (ESG) goals will be a pre-condition.

SCTI^TM is an alliance of leading chemical companies that strives to empower the textile and leather industries to apply sustainable, state-of-the-art chemistry solutions that protect factory workers, local communities, consumers and the environment.

Bluesign will implement and manage the sustainable chemistry index as an independent authority with a holistic approach to helping companies throughout the textile supply chain improve their sustainability performance.